The required_opp_tables parsing is not perfect, as the OPP core does the
parsing solely based on the DT node pointers.
The core sets the required_opp_tables entry to the first OPP table in
the "opp_tables" list, that matches with the node pointer.
If the target DT OPP table is used by multiple devices and they all
create separate instances of 'struct opp_table' from it, then it is
possible that the required_opp_tables entry may be set to the incorrect
sibling device.
Unfortunately, there is no clear way to initialize the right values
during the initial parsing and we need to do this at a later point of
time.
Cross check the OPP table again while the genpds are attached and fix
them if required.
Also add a new API for the genpd core to fetch the device pointer for
the genpd.
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Reported-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218682
Co-developed-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Let's extend the dev_pm_opp_data with a turbo variable, to allow users to
specify if it's a boost frequency for a dynamically added OPP.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core finds the eventual frequency to set with the help of
clk_round_rate() and the same was earlier getting passed to _set_opp()
and that's what would get configured.
The commit 1efae8d2e7 ("OPP: Make dev_pm_opp_set_opp() independent of
frequency") mistakenly changed that. Fix it.
Fixes: 1efae8d2e7 ("OPP: Make dev_pm_opp_set_opp() independent of frequency")
Cc: v5.18+ <stable@vger.kernel.org> # v6.0+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
By mistake, dev_pm_opp_find_level_floor() used the level parameter as
unsigned long instead of unsigned int. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
_find_key_ceil() may return an error and that must be checked before
passing the same to dev_pm_opp_put().
Fixes: 41907aa4ae37 ("OPP: Level zero is valid")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Like other frameworks (clk, regulator, etc.) genpd core too takes care
of propagation to performance state to parent genpds. The OPP core
shouldn't attempt the same, or it may result in undefined behavior.
Add checks at various places to take care of the same.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Configuring the required OPP was never properly implemented, we just
took an exception for genpds and configured them directly, while leaving
out all other required OPP types.
Now that a standard call to dev_pm_opp_set_opp() takes care of
configuring the opp->level too, the special handling for genpds can be
avoided by simply calling dev_pm_opp_set_opp() for the required OPPs,
which shall eventually configure the corresponding level for genpds.
This also makes it possible for us to configure other type of required
OPPs (no concrete users yet though), via the same path. This is how
other frameworks take care of parent nodes, like clock, regulators, etc,
where we recursively call the same helper.
In order to call dev_pm_opp_set_opp() for the virtual genpd devices,
they must share the OPP table of the genpd. Call _add_opp_dev() for them
to get that done.
This commit also extends the struct dev_pm_opp_config to pass required
devices, for non-genpd cases, which can be used to call
dev_pm_opp_set_opp() for the non-genpd required devices.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are two genpd (as required-opp) cases that we need to handle,
devices with a single genpd and ones with multiple genpds.
The multiple genpds case is clear, where the OPP core calls
dev_pm_domain_attach_by_name() for them and uses the virtual devices
returned by this helper to call dev_pm_domain_set_performance_state()
later to change the performance state.
The single genpd case however requires special handling as we need to
use the same `dev` structure (instead of a virtual one provided by genpd
core) for setting the performance state via
dev_pm_domain_set_performance_state().
As we move towards more generic code to take care of the required OPPs,
where we will recursively call dev_pm_opp_set_opp() for all the required
OPPs, the above special case becomes a problem.
It doesn't make sense for a device's DT entry to have both "opp-level"
and single "required-opps" entry pointing to a genpd's OPP, as that
would make the OPP core call dev_pm_domain_set_performance_state() for
two different values for the same device structure. And so we can reuse
the 'opp->level" field in such a case and call _set_opp_level() for the
device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The level zero can be used by some OPPs to drop performance state vote
for the device. It is perfectly fine to allow the same.
_set_opp_level() considers it as an invalid value currently and returns
early.
In order to support this properly, initialize the level field with
U32_MAX, which denotes unused level field.
Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When the new interface for attaching genpd's via the OPP core was added,
it was possible for required_opp_count to be zero, but not anymore.
Remove the unused check.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
All the config operations for OPP tables share common code paths now and
none of the other ones have such protection in place. Either all should
have it or none.
The understanding here is that user won't clear the OPP configs while
still using them and so such a case won't happen. We can always come
back and use a wider lock for all resource types if required.
Also fix the error on failing to allocate memory.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
These were previously exposed outside of the OPP core and needed doc
style commenting. They aren't public now and don't need the same.
This fixes warnings generated for builds with `W=1`:
core.c:2105: warning: Function parameter or member 'opp_table' not described in '_opp_set_supported_hw'
core.c:2105: warning: Excess function parameter 'dev' description in '_opp_set_supported_hw'
core.c:2148: warning: Function parameter or member 'opp_table' not described in '_opp_set_prop_name'
core.c:2148: warning: Excess function parameter 'dev' description in '_opp_set_prop_name'
core.c:2189: warning: Function parameter or member 'opp_table' not described in '_opp_set_regulators'
core.c:2189: warning: Excess function parameter 'count' description in '_opp_set_regulators'
core.c:2293: warning: Function parameter or member 'opp_table' not described in '_opp_set_clknames'
core.c:2293: warning: Function parameter or member 'config_clks' not described in '_opp_set_clknames'
core.c:2391: warning: Function parameter or member 'opp_table' not described in '_opp_set_config_regulators_helper'
core.c:2455: warning: Function parameter or member 'opp_table' not described in '_opp_attach_genpd'
core.c:2682: warning: Function parameter or member 'token' not described in 'dev_pm_opp_clear_config'
core.c:2682: warning: Excess function parameter 'opp_table' description in 'dev_pm_opp_clear_config'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309091558.x3JJrxFI-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add dev_pm_opp_find_level_floor(), as is done for frequency and
bandwidth.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
[ Viresh: Updated commit log and rearranged code ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
At this point the level (performance state) for an OPP is currently limited
to be requested for a device that is attached to a PM domain. Moreover,
the device needs to have the so called required-opps assigned to it, which
are based upon OPP tables being described in DT.
To extend the support beyond required-opps and DT, let's enable the level
to be set for all OPPs. More precisely, if the requested OPP has a valid
level let's try to request it through the device's optional PM domain, via
calling dev_pm_domain_set_performance_state().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: Handle NULL opp in _set_opp_level() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
To support performance scaling for any kinds of PM domains, let's move away
from using the genpd specific API, dev_pm_genpd_set_performance_state(), to
the common dev_pm_domain_set_performance_state().
No intended functional impact at this point.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Let's extend the dev_pm_opp_data with a level variable, to allow users to
specify a corresponding level (performance state) for a dynamically added
OPP.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_add() API is limited to add dynamic OPPs with a frequency
and a voltage level. To enable more flexibility, let's add a new API,
dev_pm_opp_add_dynamic() that's takes a struct dev_pm_opp_data* instead of
a list of in-parameters.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to
PTR_ERR() as reported by the smatch warning below:
drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR'
Fix it by checking for the non-NULL virt_dev pointer before passing it to
PTR_ERR. Otherwise return -ENODEV.
Fixes: 4ea9496cbc ("opp: Fix error check in dev_pm_opp_attach_genpd()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
"opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by
removing the dereference to cache opp_table and dereference it directly
where opp_table is used.
This fixes the following smatch warning:
drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable
dereferenced before IS_ERR check 'opp' (see line 230)
Fixes: 84cb7ff35f ("OPP: pstate is only valid for genpd OPP tables")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that we support finding indexed frequencies, lets update
_read_freq() to return the right one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The indexed version of the API is added for other floor and ceil, add
the same for exact as well for completeness.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the case of devices with multiple clocks, drivers need to specify the
frequency index for the OPP framework to get the specific frequency within
the required OPP. So let's introduce the dev_pm_opp_get_freq_indexed() API
accepting the frequency index as an argument.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Fixed potential access to NULL opp pointer ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In the case of devices with multiple clocks, drivers need to specify the
clock index for the OPP framework to find the OPP corresponding to the
floor/ceil of the supplied frequency. So let's introduce the two new APIs
accepting the clock index as an argument.
These APIs use the exising _find_key_ceil() helper by supplying the clock
index to it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Viresh: Rearranged definitions in pm_opp.h ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
While adding support for "performance states" in the OPP and genpd core,
it was decided to set the `pstate` field via genpd's
pm_genpd_opp_to_performance_state() helper, to allow platforms to set
`pstate` even if they don't have a corresponding `level` field in the DT
OPP tables (More details are present in commit 6e41766a6a ("PM /
Domain: Implement of_genpd_opp_to_performance_state()")).
Revisiting that five years later clearly suggests that it was
over-designed as all current users are eventually using the `level`
value only.
The previous commit already added necessary checks to make sure pstate
is only used for genpd tables. Lets now simplify this a little, and use
`level` directly and remove `pstate` field altogether.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
It is not very clear right now that the `pstate` field is only valid for
genpd OPP tables and not consumer tables. And there is no checking for
the same at various places.
Add checks in place to verify that and make it clear to the reader.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
This code was added (long back) by commit 009acd196f ("PM / OPP:
Support updating performance state of device's power domain") and at
that time the `opp->pstate` field was used to store the performance
state required by a device's OPP.
Over time that changed and the `->pstate` field is now used only for
genpd devices and consumer devices access that via the required-opps
instead.
Because of all these changes, _opp_table_kref_release() now drops the
constraint only when the genpd's OPP table gets freed and not the
device's. Which is definitely not what we wanted. And dropping the
constraint doesn't have much meaning as the genpd itself is going away.
Moreover, if we want to drop constraints here, then just dropping the
performance constraint alone isn't sufficient as there are other
resource constraints like clk, regulator, etc. too, which must be
handled.
Probably the right thing to do here is to leave this decision to the
consumers, which can call `dev_pm_opp_set_rate(dev, 0)` or similar APIs
to drop all constraints properly. Which many of the consumers already
do.
Remove the special code, which is broken anyway.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns
-EPROBE_DEFER, the opp_table is freed again, to wait until all the
interconnect paths are available.
However, if the OPP table is using required-opps then it may already
have been added to the global lazy_opp_tables list. The error path
does not remove the opp_table from the list again.
This can cause crashes later when the provider of the required-opps
is added, since we will iterate over OPP tables that have already been
freed. E.g.:
Unable to handle kernel NULL pointer dereference when read
CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3
PC is at _of_add_opp_table_v2 (include/linux/of.h:949
drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404
drivers/opp/of.c:1032) -> lazy_link_required_opp_table()
Fix this by calling _of_clear_opp_table() to remove the opp_table from
the list and clear other allocated resources. While at it, also add the
missing mutex_destroy() calls in the error path.
Cc: stable@vger.kernel.org
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 7eba0c7641 ("opp: Allow lazy-linking of required-opps")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Otherwise, when enabling a debug build and dynamic debug in the kernel, it
quickly floods the kernel ring buffer and makes debugging of other
subsystems almost impossible, unless manually disabled.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The required-opps configuration is closely tied to genpd and performance
states at the moment and it is not very obvious that required-opps can
live without genpds. Though we don't support configuring required-opps
for non-genpd cases currently.
This commit aims at separating these parts, where configuring genpds
would be a special case of configuring the required-opps.
Add a specialized callback, set_required_opps(), to the opp table and
set it to different callbacks accordingly.
This shouldn't result in any functional changes for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
There is no real need of keeping separate code for single genpd case, it
can be made to work with a simple change.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
smatch complains that 'ret' may be returned un-initialized.
Explicitly return 0 if we reach the end of the function (should
'opp_table->clk_count' be 0).
Fixes: 8174a3a613 ("OPP: Provide a simple implementation to configure multiple clocks")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The struct dev_pm_opp contains a reference of the DT node, opp->np,
throughout its lifetime. We should increase the refcount for the same
from _opp_add_static_v2(), and drop it while removing the OPP finally.
Signed-off-by: Liang He <windhl@126.com>
[ Viresh: Updated subject / commit log, create _of_clear_opp() and drop
reference from it]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is a corner case with Tegra30, where we want to skip clk
configuration via dev_pm_opp_set_opp(), but still want the OPP core to
read the "opp-hz" property so we can find the right OPP via freq finding
helpers.
This is the easiest of the ways to make it work, without any special
hacks in the OPP core. Allow config_clks to be passed for single clk
case.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This provides a simple implementation to configure multiple clocks for a
device.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Many helpers can be safely called only for devices that have a single
clk associated with them. Assert the same for those routines.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The helpers for the clock key, at least, would need to assert that the
helpers are called only for single clock case. Prepare for that by
adding an argument to the key finding helpers.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Replicate the same behavior as "rates" here and compare all values
instead of relying on the first entry alone.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds support to allow multiple clocks for a device.
The design is pretty much similar to how this is done for regulators,
and platforms can supply their own version of the config_clks() callback
if they have multiple clocks for their device. The core manages the
calls via opp_table->config_clks() eventually.
We have kept both "clk" and "clks" fields in the OPP table structure and
the reason is provided as a comment in _opp_set_clknames(). The same
isn't done for "rates" though and we use rates[0] at most of the places
now.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
dev_pm_opp_set_opp() can be called for any device, it may or may not
have a frequency value associated with it.
If a frequency value isn't available, we pass 0 to _set_opp(). Make it
optional instead by making _set_opp() accept a pointer instead, as the
frequency value is anyway available in the OPP. This makes
dev_pm_opp_set_opp() and _set_opp() completely independent of any
special key value.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reuse _opp_compare_key() in _opp_add_static_v2() instead of just
comparing frequency while finding suspend frequency. Also add a comment
over _opp_compare_key() explaining its return values.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
commit 32715be4fe ("opp: Fix adding OPP entries in a wrong order if
rate is unavailable") removed the only user of this field, get rid of
rest of it now.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table is called "opp_table" at most of the places and "table" at
few. Make all of them follow the same naming convention, "opp_table".
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
