Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:
ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.
With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-31-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@vger.kernel.org
Fixes: 9fbd58cf4a ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is
used for DSP_B format, 1 is used for DSP_A format, 2 is unused.
A data delay of 2 bit clock periods can be used to interface to
'T1 framing' devices where data stream is preceded by a 'framing bit'. On
transmission, McBSP inserts a blank period (high-impedance period)
before the first data bit to leave an opportunity for other devices to
set this 'framing bit'. On reception, McBSP discards the 'framing bit'
that precedes the data stream.
Add support for the 'framing bit' according to the
'ti,T1-framing-[tx/rx]' device-tree properties. If a flag is present,
the data delay is set to 2 bit clock periods regardless of the selected
DAI format.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-14-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
S24_LE is supported by McBSP but not by the driver.
Add S24_LE to driver's supported formats. Using it enables the sign
extension in DRR (Data Receive Register). The other formats are kept
with the zero extension in DRR.
Remove data_type table as it is no longer used.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-12-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP has free-running mode where serial clocks continue to run during
emulation halts. This mode is always enabled by the driver.
Set free-running mode when SND_SOC_DAIFMT_CONT is selected by DAI
format, unset it when SND_SOC_DAIFMT_GATED is selected.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-11-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP can generate a SYNCERR when unexpected frame pulses are
detected. The driver always disables this feature and ignore the
unexpected frame pulses.
Enable the generation of SYNCERR by the McBSP. Unexpected frame
pulses are not ignored anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-10-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP is able to drive bit clock and consume frame clock but BP_FC
format is not handled by McBSP driver.
Add BP_FC format support.
When BP_FC is selected:
- CLKX and CLKR are configured as outputs
- The sample rate generator is configured to be able to provide bit
clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-9-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM is not supported by the McBSP driver. The McBSP datasheet does not
name explicitly TDM as a supported format but it is possible to configure
the McBSP to do TDM if all slots are used by McBSP.
Add TDM support. It uses single-phase frame. Slot width is used to
compute the McBSP's word length.
Implement the set_tdm_slot() hook of snd_soc_dai_ops struct. It only
supports TDM if all slots are used by McBSP.
The snd_soc_dai_driver's channels_max is updated from 2 to 128.
This was tested with BP_FC format on a platform designed off of
DAVINCI/OMAP_L138. A check is done in davinci_i2s_set_dai_fmt() to
prevent TDM to be used with BC_FC and BC_FP formats.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-8-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In davinci_i2s_hw_params(), mcbsp_word_length is set twice to
asp_word_length[fmt].
Remove second unnecessary assignment.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-7-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's internal sample rate generator can be programed to be driven by
its internal clock or by an external clock source located on CLKS pin.
The external clock source case is not handled by the driver.
Handle an optional clock related to this external clock source. If
present, the driver uses the clock located on CLKS pin as input for the
sample rate generator. Thus, the external clock rate is used to compute
divisors. If this optional clock is not present, the sample rate
generator is driven by the McBSP's functional clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-6-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In probe(), the dev_err() is used for every returned error.
Replace dev_err() with dev_err_probe() where -EPROBE_DEFER can be
returned.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-5-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clk_input_pin attribute of davinci_mcbsp_dev struct is not set since
commit 257ade78b6 ("ASoC: davinci-i2s: Convert to use edma-pcm").
Remove the attribute.
Keep the behaviour of the MCBSP_CLKR case as MCBSP_CLKR == 0.
I can't test the BC_FP format so I added back the initial comment that
was removed by commit ec63755337 ("ASoC: DaVinci: Added selection of
clk input pin for McBSP"). This was the last dependency to
linux/platform_data/davinci_asp.h so it is not included anymore.
Remove the enum mcbsp_clk_input_pin from davinci_asp.h as it is not used
anywhere else.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-4-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let's use devm_snd_soc_register_card() instead of snd_soc_register_card()
and ignore snd_soc_unregister_card()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87zfxcwv58.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to check for an active device as otherwise we get warnings
for some mcbsp instances for "Runtime PM usage count underflow!".
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231030052340.13415-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is now built only when MACH_AMS_DELTA is selected, which
requires a very specific selection of ARCH settings. As a consequence, it
gets very little attention from build-bots, if not none.
Drop the driver dependency on <asm/mach-types.h>, no longer required since
conversion to snd_soc_register_card() and drop of machine_is_ams_delta().
With that in place, allow the driver to be built in any environment as
long as COMPILE_TEST is selected. Take care of not selecting
SND_SOC_OMAP_MCBSP if COMMON_CLK is not selected.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20231008135601.542356-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-5-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy header <linux/gpio.h> but doesn't
use it. Drop the include.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-5-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Pandora uses GPIO descriptors pretty much exclusively, but not
for ASoC, so let's fix it. Register the pins in a descriptor table
in the machine since the ASoC device is not using device tree.
Use static locals for the GPIO descriptors because I'm not able
to experient with better state storage on any real hardware. Others
using the Pandora can come afterwards and improve this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-4-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TWL4030 is actually only ever populated from the device tree,
so we can just pass the right device and headphone jack GPIO name
to snd_soc_jack_add_gpios() and it will pick the right GPIO right
from the device tree.
The platform data patch is unused (no in-tree users of the pdata
method) but these can use GPIO descriptor tables rather than global
GPIO numbers if they need this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-3-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The N810 uses GPIO descriptors pretty much exclusively, but not
for ASoC, so let's fix it. Register the pins in a descriptor table
in the machine since the ASoC device is not using device tree.
Use static locals for the GPIO descriptors because I'm not able
to experient with better state storage on any real hardware. Others
using the N810 can come afterwards and improve this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-1-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The RX51/Nokia n900 uses the legacy GPIO header to convert a GPIO
back to the global GPIO numberspace and then the jack using it
in the snd_soc_jack_add_gpios() call immediately looks up the
corresponding descriptor again.
The snd_soc_jack_add_gpios() handles GPIOs passed with devices
just fine: pass in the device instead, and rename the GPIO
to match the property in the device tree, and it should work
all the same but without all the trouble.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-2-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bke8s25q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
This makes all those 'unsigned char's an explicit 'u8'. This is part of
the continuing unification of chars and flags to be consistent u8.
This approaches tty_port_default_receive_buf(). Flags to be next.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Max Staudt <max@enpas.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230810091510.13006-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The init/exit() of driver only calls platform_driver_register/unregister,
it can be simpilfied with module_platform_driver.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804085402.1328033-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 349355ce3a ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp")
dropped prcm_fck for omap4, so the clk_src might not be available making the
clk_get(src) fail. In such cases, rely on the devicetree to assign
the correct parent.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20230705190324.355282-2-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pcm_for_each_format for the PCM format iteration and fix the
following sparse warnings.
sound/soc/ti/davinci-mcasp.c:1336:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1358:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1438:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
No functional changes.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230519211636.3699-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai_link->platform is no longer needed if CPU and Platform are
same Component. This patch removes unnecessary dai_link->platform.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lejnjczu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-166-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-165-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-164-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-163-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-162-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works,
and not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements
-----BEGIN PGP SIGNATURE-----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=9s9c
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of works in this cycle are about ASoC spread over trees.
Most of them are for new devices and cleanups / refactoring works, and
not much significant changes are seen in the core side.
Below are some highlights:
ASoC:
- Continued refactoring to move into common helper functions
- Lots of DT schema conversons and stylistic nits
- Continued work on building out the new SOF IPC4 scheme
- Continued work for Intel AVS
- New drivers for Awinc AT88395, Infineon PEB2466, Iron Device
SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034,
Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1
ALSA:
- A few cleanups to make the remove callbacks to void returns
- FireWire refactoring and enhancements
- PCM kselftest enhancements"
* tag 'sound-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (398 commits)
ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU Macbooks
ASoC: soc-ac97: Return correct error codes
ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared
ASoC: cs35l45: Remove separate namespace for tables
ASoC: cs35l45: Remove separate tables module
ASoC: soc-ac97: Convert to agnostic GPIO API
ASoC: dt-bindings: renesas,rsnd.yaml: drop "dmas/dma-names" from "rcar_sound,ssi"
ALSA: hda: cs35l41: Enable Amp High Pass Filter
ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded
ALSA: hda: cs35l41: Correct error condition handling
ASoC: codecs: wcd934x: Use min macro for comparison and assignment
ASoC: Intel: Skylake: Fix struct definition
ASoC: tlv320adcx140: extend list of supported samplerates
ASoC: imx-pcm-rpmsg: Remove unused variable
SoC: rt5682s: Disable jack detection interrupt during suspend
ASoC: SOF: Intel: hda-dsp: Set streaming flag for d0i3
ASoC: SOF: Intel: Enable d0i3 work for ipc4
ASoC: SOF: ipc4: Wake up dsp core before sending ipc msg
ASoC: SOF: Intel: hda-dsp: use set_pm_gate according to ipc version
ASoC: SOF: Introduce a new set_pm_gate() IPC PM op
...
