In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-17-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams on AMDTP streams in domain is recorded in
own structure. Usage of this count is an alternative of the above check.
This is better because the count is incremented in pcm.hw_params earlier
than pcm.trigger.
This commit replaces the check with the substream count and the value for
the size of PCM period. Unlike the other drivers in ALSA firewire stack,
no MIDI substream is multiplexed into AMDTP stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-16-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
I note that DOT AMDTP protocol has a quirk to use different transmission
method of IEC 61883-6 for tx/rx streams; non-blocking in tx stream and
blocking in rx stream. Although the difference of transmission method
between tx/rx streams precisely brings different timing for a certain
amount of events due to their different calculation for data blocks per
packet, it's possible to approximate enough amount of events mostly has
the same timing. Actually current ALSA IEC 61883-1/6 engine uses large
amount of data blocks for each hardware IRQ (=16 packets).
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-15-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Dice hardware has a quirk called as 'Dual Wire'. For a case of higher
sampling transmission frequency, this commit performs calculations between
the number of PCM frames and the number of events in AMDTP stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-14-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-13-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.
The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.
This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.
Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.
This commit replaces the check with the substream count and the value for
the size of PCM period.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, it's called as 'event' what has presentation time
represented by timestamp in CIP header. Although the ratio of the number
of event against the number of data block is different depending on
event data type represented by the specific field in CIP header, it's
just one in the most cases supported by ALSA IEC 61883-1/6 engine.
In 1394 OHCI specification, applications can schedule hardware IRQ
by configuring descriptor with IRQ flag for packet against each
isochronous cycle. For future commit, I use the hardware IRQ for
isoc IT context to acknowledge the elapse of PCM period for both
playback/capture directions on AMDTP streams in the same domain.
This commit is a preparation for the above idea. This commit adds
a member into AMDTP domain structure to record the number of PCM frames.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191004144931.3851-1-krzk@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data
channels per data block in CIP.
Both iO14 and iO26 have the same contents in their configuration ROM.
For this reason, ALSA Dice driver attempts to distinguish them according
to the value of TX0_AUDIO register at probe callback. Although the way is
valid at lower and middle sampling rate, it's lastly invalid at higher
sampling rate because because the two models returns the same value for
read transaction to the register.
In the most cases, users just plug-in the device and ALSA dice driver
detects it. In the case, the device runs at lower sampling rate and
the driver detects expectedly. For this reason, this commit leaves the
way to detect as is.
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 bytes in MSB of register for clock status is zero during intermediate
state after changing status of sampling clock in models of TASCAM FireWire
series. The duration of this state differs depending on cases. During the
state, it's better to retry reading the register for current status of
the clock.
In current implementation, the intermediate state is checked only when
getting current sampling transmission frequency, then retry reading.
This care is required for the other operations to read the register.
This commit moves the codes of check and retry into helper function
commonly used for operations to read the register.
Fixes: e453df44f0 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The return value of snd_tscm_stream_get_clock() is ignored. This commit
checks the value and handle error.
Fixes: e453df44f0 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl13cr4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NKuB/9fvRIh6bJ4pUA26Bc7+shJQ1BtC/MN
jo1G4maN+hY5ZUwE5hvg04S6W6Unm1iNotQecKcF43Vh/4SZNiLtfSEM4b/6IBWw
IFUU6xDz8Q4HbF4HJMotpKQKMABpfds5flH2e1YrrNoMH+KlkC9kJOR26B2W36xW
TZclfquCDICxr8M7eYGM7N5hOqSrlugyWBZqTTnTDnsMrW4SAaH2HYwFhaeayd+I
ECyaXIoUHvo4FX5ueZv/mzBiMl0z4rgXn3tuqI6a8LoWJdRZTkcSQabtuIC+wmxb
P734RY6vjSUYZrv03cAtxHDrSVoC/RYedOzhT+iFF6y/NHzdu701lsJb
=aD0T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.4
Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on. We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.
- Lots and lots of cleanups from Morimoto-san and Yue Haibing.
- Lots of cleanups and enhancements to the Freescale, sunxi dnd
Intel rivers.
- Initial Sound Open Firmware suppot for i.MX8.
- Removal of w90x900 and nuc900 drivers as the platforms are
being removed.
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale
i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334
The destructor of AMDTP domain has WARN_ON() for the list of associated
AMDTP stream. Although this reminds a case that developers forget to
program consumer drivers to stop AMDTP domain, it hits when AMDTP domain
is not initialized yet. This occurs when initialization of sound card
fails as well and it's superfluous.
This commit removes the WARN_ON. Although the API to AMDTP domain does
nothing, it's left for future usage.
Fixes: 3ec3d7a3ff ("ALSA: firewire-lib: add AMDTP domain structure to handle several isoc contexts")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190906131414.15370-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TASCAM FE-8 is the rest of model in TASCAM FireWire series. This device
has no functionality to process audio signal and MIDI messages. Instead,
it transfers control messages to host system corresponding to operations
for some faders, buttons and knobs on its surface.
Unlike the other devices in this series, the control messages are
transmitted by asynchronous transactions. Some registers of device are
used for registration of destination address for the transaction. The
transaction includes quadlet-aligned data up to 32 quadlets.
Userspace applications can receive the transaction and parse it for
control message via Linux FireWire subsystem, without any support by
ALSA firewire-tascam driver. Therefore the driver gives no support
for it.
This commit removes placeholder for FE-8 and add some comment for its
functionalities as notes.
$ python2 linux-firewire-utils/src/crpp < ~/git/am-config-rom/tascam/tascam-fe8.img
ROM header and bus information block
-----------------------------------------------------------------
400 040f4798 bus_info_length 4, crc_length 15, crc 18328 (should be 14256)
404 31333934 bus_name "1394"
408 20ff7002 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 00022eff company_id 00022e |
410 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
root directory
-----------------------------------------------------------------
414 0004bccc directory_length 4, crc 48332
418 0300022e vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003eda4 directory_length 3, crc 60836
42c 1200022e specifier id
430 13800001 version
434 d4000004 --> dependent info directory at 444
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002461e leaf_length 2, crc 17950
43c 00022eff company_id 00022e |
440 a094dcb7 device_id ffa094dcb7 | EUI-64 00022effa094dcb7
dependent info directory at 444
-----------------------------------------------------------------
444 0002ae47 directory_length 2, crc 44615
448 81000002 --> descriptor leaf at 450
44c 82000006 --> bus dependent info leaf at 464
descriptor leaf at 450
-----------------------------------------------------------------
450 0004a79e leaf_length 4, crc 42910
454 00000000 textual descriptor
458 00000000 minimal ASCII
45c 54415343 "TASC"
460 414d0000 "AM"
bus dependent info leaf at 464
-----------------------------------------------------------------
464 0004a7d8 leaf_length 4, crc 42968
468 00000000
46c 00000000
470 46452d38
474 00000000
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190906125544.13800-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU 4pre was launched in 2012 by MOTU, Inc. This commit allows userspace
applications can transmit and receive PCM frames and MIDI messages for
this model via ALSA PCM interface and RawMidi/Sequencer interfaces.
The device supports MOTU protocol version 3. Unlike the other devices, the
device is simply designed. The size of data block is fixed to 10 quadlets
during available sampling rates (44.1 - 96.0 kHz). Each data block
includes 1 source packet header, 2 data chunks for messages, 8 data chunks
for PCM samples and 2 data chunks for padding to quadlet alignment. The
device has no MIDI, optical, BNC and AES/EBU interfaces.
Like support for the other MOTU devices, the quality of playback sound
is not enough good with periodical noise yet.
$ python2 crpp < ~/git/am-config-rom/motu/motu-4pre.img
ROM header and bus information block
-----------------------------------------------------------------
400 041078cc bus_info_length 4, crc_length 16, crc 30924
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 0003ceda directory_length 3, crc 52954
42c 120001f2 specifier id
430 13000045 version
434 17103800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002d248 leaf_length 2, crc 53832
43c 0001f200 company_id 0001f2 |
440 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When introducing the list of packet descriptor, for rx packet, the
calculation of scheduled isoc cycle is omitted. This commit fixes the
bug.
Fixes: f4f6ae7b7c ("ALSA: firewire-lib: use packet descriptor for IT context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When introducing AMDTP domain to ALSA dice driver, error path does not
handle error correctly. This commit fixes the bug.
Fixes: e9f21129b8 ("ALSA: dice: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.
This commit fixes the bug for v5.3-rc kernel.
Fixes: 4f380d0070 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA oxfw driver supports Griffin FireWave. This device supports one
isochronous stream for PCM playback. Current driver executes code to
wait event for stream structure of opposite direction. This causes
NULL pointer dereference.
This commit fixes the bug.
Fixes: ac5d77864c ("ALSA: oxfw: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull USB validation patches. It's based on the latest 5.3 development
branch, so we shall catch up the whole things.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.
To fix the above issue, free 'b->packets' before returning the error code.
Fixes: 31ef9134eb ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a result to support AMDTP domain, no drivers call kernel APIs to
start/stop each AMDTP stream. This commit localize these APIs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to support AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to support AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to support AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to support AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to support AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to support AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a kernel API to start a couple of isochronous contexts
for some AMDTP streams.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a kernel API to insert AMDTP stream to list in AMDTP
domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a kernel API to stop a couple of isochronous contexts
for AMDTP streams. The API is not protected with any lock primitive.
Callers should use this with enough lock against concurrent access.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds 'struct amdtp_domain' structure. This structure
has list of instance of AMDTP stream to handle a couple of
isochronous contexts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU data block processing layer has some tracepoints events. This
commit is code refactoring to split probing the events from processing
data blocks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit changes each of data block processing layer so that it
receives list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring for FF data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring for MOTU data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring for TASCAM data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring for DOT data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring for AM824 data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit changes signature of callback function to call data block
processing layer with packet descriptor. At present, the layer is called
per packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring for common processing for payloads of
ishocornous context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is code refactoring to separate PCM substream processing from packet
queueing.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit uses packet descriptor to parse headers of IR context and
parse timing information for sequence transferred by target device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit uses packet descriptor to parse headers of IT context and
generate timing information for ideal sequence.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation of ALSA IEC 61883-1/6 packet streaming engine,
16 packets are handled in one interrupt of isochronous context of OHCI
1394.
Overall packet processing runs for each. However, this is not better in
a point to split the processing into several parts.
This commit is an attempt to add intermediate representation for
parameters required for the parts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a previous commit, the variable passed from packet streaming layer
for syt variable is useless. This commit obsoletes it.
In my future work, the syt information is passed to data block processing
layer by another way.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some protocols don't use syt field of CIP header to represent
presentation timestamp. For such protocol, ALSA IEC 61883-1/6
packet streaming engine uses a pointer into local variable for
the value of syt to call data block processing layer. However,
it can decide the value when initializing packet streaming
layer.
This commit adds 'syt_override' member for packet streaming
layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ALSA IEC 61883-1/6 packet streaming engine, two types of data block
counter are supported. This commit applies code refactoring to make it
explicitly for IR context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ALSA IEC 61883-1/6 packet streaming engine, two types of data block
counter are supported. This commit applies code refactoring to make it
explicitly for IT context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preparation for future commit that 'struct
amdtp_stream.data_block_count' does not represent the value of
data block count for current data block.
However, data block count is required for calculation of sequence index
in sequence-multiplied data channel. Some of data block processing layer
require it; e.g. for AM824 data block.
This commit passes data block count to the processing layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preparation for future commit that 'struct
amdtp_stream.data_block_count' does not represent the value of
data block count for current data block.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recent firmware for Fireworks board module have a quirk to start
transmission of CIP with non-zero value for its data block counter.
In current implementation of ALSA firewire stack, the quirk is handled
by 'struct amdtp_stream.ctx_data.tx.first_dbc' with value 0x02. However,
the value comes from reverse engineering. It's better to handle this
quirk without the explicit value.
In a process to parse CIP header, the quirk of data block counter
affects decision of sequence index in sequence-multiplexed data channel;
i.e. MIDI conformant data channel. In Fireworks, the index is decided
by the number of data blocks from top of the same CIP, thus the value
of data block counter is useless.
This commit adds CIP_UNALIGHED_DBC flag and obsoletes the explicit
value for this quirk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's better to use int type for loop index. For consistency, the name
of local variable for the number of data block should be plural.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a result of former commits, post operation to data block count for
cases without CIP_DBC_IS_END_EVENT can be done just with
data_block_counter member of amdtp_stream structure.
This commit adds code refactoring to obsolete local variable for
data block counter.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a parser for CIP header returns -EAGAIN, no extra care is needed
to probe tracepoints event.
This commit adds code refactoring for the error path.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For IT context, tracepoints event is probed after calculating next data
block counter. This brings difference of data block counter between
the probed event and actual isochronous packet.
This commit fixes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For IR context, ALSA IEC 61883-1/6 engine uses initial value of data
block counter as UINT_MAX, to detect first isochronous packet in the
middle of packet streaming.
At present, when CIP_DBC_IS_END_EVENT is not used (i.e. for drivers except
for ALSA fireworks driver), the initial value is used as is for
tracepoints event. However, the engine can detect the value of dbc field
in the payload of first isochronous packet and the value should be assigned
to the event.
This commit fixes the bug.
Fixes: 76864868db ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For IR context, ALSA IEC 61883-1/6 engine uses initial value of data
block counter as UINT_MAX, to detect first isochronous packet in the
middle of packet streaming.
At present, when CIP_NO_HEADER is used (i.e. for ALSA fireface driver),
the initial value is used for tracepoints event. 0x00 should be
for the event when the initial value is UINT_MAX because isochronous
packets with CIP_NO_HEADER option has no field for data block count.
This commit fixes the bug.
Fixes: 76864868db ("ALSA: firewire-lib: cache next data_block_counter after probing tracepoints event for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although CIP header is handled as context header, the length of isochronous
packet includes two quadlets for its payload. In tracepoints event the
value of payload_quadlets should includes the two quadlets. But at present
it doesn't.
This commit fixes the bug.
Fixes: b18f0cfaf1 ("ALSA: firewire-lib: use 8 byte packet header for IT context to separate CIP header from CIP payload")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA firewire-motu driver allows applications of rawmidi interface to
start packet streaming for transmission of MIDI messages. However at
error path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: 8edc56ec8f ("ALSA: firewire-motu: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA firewire-digi00x driver allows applications of rawmidi interface to
start packet streaming for transmission of MIDI messages. However at
error path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: ae8ffbb265 ("ALSA: firewire-digi00x: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA dice driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: 3cd2c2d780 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA oxfw driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: 4f380d0070 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA fireworks driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: 3d7250667e ("ALSA: fireworks: configure sampling transfer frequency in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.
ALSA bebob driver allows applications of rawmidi interface to start
packet streaming for transmission of MIDI messages. However at error
path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.
This commit fixes the bug.
Fixes: ac2888b958 ("ALSA: bebob: configure sampling transfer frequency in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, 8 MIDI data streams are multiplexed into single
MIDI conformant data channel. The index of stream is calculated by
modulo 8 of the value of data block counter.
In fireworks, the value of data block counter in CIP header has a quirk
with firmware version v5.0.0, v5.7.3 and v5.8.0. This brings ALSA
IEC 61883-1/6 packet streaming engine to miss detection of MIDI
messages.
This commit fixes the miss detection to modify the value of data block
counter for the modulo calculation.
For maintainers, this bug exists since a commit 18f5ed365d ("ALSA:
fireworks/firewire-lib: add support for recent firmware quirk") in Linux
kernel v4.2. There're many changes since the commit. This fix can be
backported to Linux kernel v4.4 or later. I tagged a base commit to the
backport for your convenience.
Besides, my work for Linux kernel v5.3 brings heavy code refactoring and
some structure members are renamed in 'sound/firewire/amdtp-stream.h'.
The content of this patch brings conflict when merging -rc tree with
this patch and the latest tree. I request maintainers to solve the
conflict to replace 'tx_first_dbc' with 'ctx_data.tx.first_dbc'.
Fixes: df075feefb ("ALSA: firewire-lib: complete AM824 data block processing layer")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-6, 8 MIDI data streams are multiplexed into single MIDI
conformant data channel. The index of stream is calculated by modulo 8
of the value of data block counter. Therefore data block processing
layer requires valid value of data block counter.
In recent changes of ALSA IEC 61883-1/6 engine, the value of data block
counter is changed before calling data block processing layer. This
brings miss detection of MIDI messages in non-blocking transmission
method is used.
This commit fixes the bug by changing chached data block counter after
calling data block processing layer.
Fixes: e335425b65 ("ALSA: firewire-lib: split helper function to check incoming CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For debugging purpose, ALSA IEC 61883-1/6 engine has tracepoints event.
In current implementation, next data block counter is stored as current
data block counter before probing the event for IR isoc context. It's not
good to check current packet parameter.
This commit changes to assign the next data block counter after probing
the event.
Besides, Fireworks devices has a quirk to transfer isoc packet with
data block counter for the last data block. For this quirk, the
assignment is done before calling data block processing layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ALSA firewire-motu driver, some tracepoints are supported to probe
vendor-specific data fields for SPH and status/control messages in
payload of isochronous packet. At present, the events of tracepoints
are unique each of direction, however the pair of events has the
same structure and print format. It's possible to unify the pair.
This commit unifies the pair. From userspace, direction is specified
by filtering for src/dst fields in the structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit e703965a12.
When creating this patch, I compared the value of src field to the
value of first byte of cip_header field (SID) in tracing event.
But in this test I used a device which has a quirk to transfer
isochronous packet with invalid SID. The original change is valid.
Fixes: e703965a12 ("ALSA: firewire-lib: fix inverted node IDs for amdtp_packet events")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a7 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a7 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a7 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation to finish packet streaming includes stopping isochronous
contexts. This commit merges it to the helper function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper function to stop isochronous context is superfluous. This
commit removes it with simpler codes.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other drivers in ALSA firewire stack, this commit renames
functions to begin/finish packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_motu_stream_start_duplex() function, there're two points to stop
packet streaming, however they can be merged. This commit merges them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit adds a helper function to allocate isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two sets of callbacks for rawmidi.open/close but they have the same
codes. This commit unifies each of the callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two counters are used to maintain isochronous packet streaming for both
directions. However, like the other drivers, they can be replaced with
one counter. This commit unifies them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation, establishment connection corresponds to
allocation of isochronous resources. Although this is an ideal
implementation of CMP described in IEC 61883-1, it's not enough
efficient to recover PCM substream multiplexed in packet streaming.
The packet streaming can always restart on the same allocated
isochronous resources even if the previous packet streaming
corrupted.
This commit splits allocation of isochronous resources from
establishment of connection so that CMP runs with allocated
isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation of duplex streams should be in critical section.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation of duplex streams should be in critical section.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of rawmidi.hw_params callback functions and .hw_free callback
functions for both direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callback functions and .hw_free callback
functions for both direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
you might feel like a deja vu to receive a bulk of changes at rc5,
and it happens again; we've got a collection of fixes for ASoC.
Most of fixes are targeted for the newly merged SOF (Sound Open
Firmware) stuff and the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent
ASoC core changes and HD-audio quirk, as well as a couple of
FireWire fixes and for other ASoC codecs.
-----BEGIN PGP SIGNATURE-----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=9U0L
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It might feel like deja vu to receive a bulk of changes at rc5, and it
happens again; we've got a collection of fixes for ASoC. Most of fixes
are targeted for the newly merged SOF (Sound Open Firmware) stuff and
the relevant fixes for Intel platforms.
Other than that, there are a few regression fixes for the recent ASoC
core changes and HD-audio quirk, as well as a couple of FireWire fixes
and for other ASoC codecs"
* tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
ALSA: firewire-motu: fix destruction of data for isochronous resources
ASoC: Intel: sst: fix kmalloc call with wrong flags
ASoC: core: Fix deadlock in snd_soc_instantiate_card()
SoC: rt274: Fix internal jack assignment in set_jack callback
ALSA: hdac: fix memory release for SST and SOF drivers
ASoC: SOF: Intel: hda: use the defined ppcap functions
ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
ASoC: sun4i-i2s: Add offset to RX channel select
ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
ASoC: max98090: remove 24-bit format support if RJ is 0
ASoC: da7219: Fix build error without CONFIG_I2C
ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
ASoC: SOF: fix DSP oops definitions in FW ABI
...
This commit fixes the warning due to returning uninitialized value
from start_streams() helper function.
sound/firewire/dice/dice-stream.c: In function 'start_streams.isra.0':
>> sound/firewire/dice/dice-stream.c:350:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized]
int err;
^~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 3cd2c2d780 ("ALSA: dice: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit splits out an operation to configure stream parameters into
pcm.hw_params callback. In pcm.prepare callback, establishing
connections and start isochronous contexts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
At present, several operations are done in pcm.prepare callback. To
reduce load of the callback, This commit splits out an operation to
set packet format in pcm.hw_params callback.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, two isochronous contexts are handles at the same
time. This commit unifies stream counters to obsolete them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, ALSA oxfw driver handles two isochronous contexts
at the same time, except for some devices which supports one endpoint
of isochronous packet stream.
This commit renames some helper functions so that they handles duplex
streams.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper function stop packet streaming is not enough useful. This
commit obsoletes it and expands its code.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In most cases, recovery from bus reset is not successful. This commit
aborts packet streaming in bus reset handler.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's inconvenient to handle two isochronous context separately
each other. This commit unifies the counters to handle the two
at the same time.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After a call of pcm.hw_params, the state of target device is expected
for applications. This commit retrieves the state and start packet
streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit unifies stop condition due to queueing error and unmatched
state of the target device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming, no need to stop PCM substream with XRUN
state. This commit suppresses it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit splits out an operation to configure stream parameters into
pcm.hw_params callback. In pcm.prepare callback, establishing
connections and start isochronous contexts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
At present, several operations are done in pcm.prepare callback. To
reduce load of the callback, This commit splits out an operation to
set sampling transfer frequency in pcm.hw_params callback.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two sets of callbacks for pcm.hw_params/hw_free but they have the same
codes. This commit unifies each of the callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two sets of callbacks for rawmidi.open/close but they have the same
codes. This commit unifies each of the callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
It's inconvenient to handle two isochronous context separately
each other. This commit unifies the counters to handle the two
at the same time.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit changes helper functions to initialize/destroy stream
data so that it has an argument for direction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The private structure of this driver has 'connected' member but nowadays
it's useless. This commit removes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When stopping packet streaming, no need to stop PCM substream with XRUN
state. This commit suppresses it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
At present, several operations are done in pcm.prepare callback. To
reduce load of the callback, This commit splits out an operation to
set sampling transfer frequency in pcm.hw_params callback.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
This commit adds a helper function to allocate isochronous resources,
separated from operations to start packet streaming, I note that some
dice-based devices have two pair of endpoints for isochronous packet
straeming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
There're three points to finish packet streaming but no helper
functions for common operations for it. This commit adds a helper
function for operations to finish packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
All of models in Digidesign Digi00x family have the same formation of
data channels in isochronous packet for both directions. This commit
simplifies allocation of isochronous resources in this point.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
The caller of begin_session() calls finish_session() in its error path,
thus no need to call finish_session() in error path of begin_session().
This commit simplifies error path of begin_session().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
The operation to finish packet streaming corresponds to stopping
isochronous contexts. This commit applies code refactoring to
move codes to stop into a helper function to finish the session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.
The registration of isochronous channels is done just after allocation
of isochronous resources. This commit separates the registration just
before starting packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
Fixes: de5126cc3c ("ALSA: oxfw: add stream format quirk for SCS.1 models")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation to finish packet streaming corresponds to stopping
isochronous contexts.
This commit applies code refactoring to move codes to stop into
a helper function to finish the session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to restart packet streaming should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming for allocated the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit implements allocate_resources callback for the protocol
specific to latter models. The encoded values of constant table is
split into several condition statements to separate the operation
to configure sampling transfer frequency from the operation to
configure the number of data channels in rx packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit implements allocate_resources callback for ff400 protocol.
In this callback, sampling transfer frequency is configured to the
device as well.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit implements allocate_resources callback for ff800 protocol.
As I noted in commit fc716397a5 ("ALSA: fireface: add support for
packet streaming on Fireface 800"), this unit allocates isochronous
resources for tx stream voluntarily. Therefore, this commit is to
maintain isochronous rsources for rx stream. In the callback,
sampling transfer frequency is configured to the device as well.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
In ALSA fireface driver, the allocation of isochronous resources is
programmed in each implementation of protocol. This commit adds
protocol-specific operation for the allocation separated from
the operation to begin session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.
This commit unifies the pairs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The operation to finish packet streaming corresponds to stopping
isochronous contexts.
This commit applies code refactoring to move codes to stop into
a helper function to finish the session.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to restart packet streaming should
request reallocation of the resources.
However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.
Due to the above mechanism, ALSA firewire-tascam driver just stops
packet streaming in the update handler, thus pcm.prepare handler
should request the reallocation.
This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.
This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming for allocated the resources.
There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit obsoletes a helper function to release isochronous resources
for both direction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
This commit applies minor code refactoring for a helper function to
allocate isochronous resources.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a part of preparation to perform allocation/release
of isochronous channels in pcm.hw_params/hw_free callbacks.
The registration of isochronous channels is done just after allocation
of isochronous resources. This commit separates the registration just
before starting packet streaming.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The data for isochronous resources is not destroyed in expected place.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 9b2bb4f2f4 ("ALSA: firewire-motu: add stream management functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
licensed under the terms of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 88 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No big surprises here, just a few device-specific fixes.
HD-audio received several fixes for Acer, Dell, Huawei and other
laptops as well as the workaround for the new Intel chipset.
One significant one-liner fix is the disablement of the node-power
saving on Realtek codecs, which may potentially cover annoying bugs
like the background noises or click noises on many devices.
Other than that, a fix for FireWire bit definitions, and another fix
for LINE6 USB audio bug that was discovered by syzkaller.
-----BEGIN PGP SIGNATURE-----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=Bj5P
-----END PGP SIGNATURE-----
Merge tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No big surprises here, just a few device-specific fixes.
HD-audio received several fixes for Acer, Dell, Huawei and other
laptops as well as the workaround for the new Intel chipset. One
significant one-liner fix is the disablement of the node-power saving
on Realtek codecs, which may potentially cover annoying bugs like the
background noises or click noises on many devices.
Other than that, a fix for FireWire bit definitions, and another fix
for LINE6 USB audio bug that was discovered by syzkaller"
* tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: fireface: Use ULL suffixes for 64-bit constants
ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops
ALSA: line6: Assure canceling delayed work at disconnection
ALSA: hda - Force polling mode on CNL for fixing codec communication
ALSA: hda/realtek - Enable micmute LED for Huawei laptops
ALSA: hda/realtek - Set default power save node to 0
ALSA: hda/realtek - Check headset type by unplug and resume
With gcc 4.1:
sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_switch_fetching_mode’:
sound/firewire/fireface/ff-protocol-latter.c:97: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_begin_session’:
sound/firewire/fireface/ff-protocol-latter.c:170: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c:197: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c:205: warning: integer constant is too large for ‘long’ type
sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_finish_session’:
sound/firewire/fireface/ff-protocol-latter.c:214: warning: integer constant is too large for ‘long’ type
Fix this by adding the missing "ULL" suffixes.
Add the same suffix to the last constant, to maintain consistency.
Fixes: fd1cc9de64 ("ALSA: fireface: add support for Fireface UCX")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a result of heavy refactoring based on IR context header, the packet
handler becomes simpler.
This commit merges the packet handler into function for IR context
callback. The logic to parse IR context header and tracepoints event is
split to a function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a result of heavy refactoring based on IT packet header, the packet
handler becomes simpler.
This commit merges the packet handler into function for IT context
callback. The logic to build IT packet header and tracepoints event is
split to a function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value of data block counter is not calculated for incoming packet
without CIP header. This commit fixes the bug.
Fixes: 947b437e12 ("ALSA: firewire-lib: unify packet handler for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In Linux firewire subsystem, for IT context, some quadlets of isochronous
packet payload can be indicated as a part of packet header to queue to
the context.
This commit uses the packet header to split CIP headers from CIP
payload. As a result, regardless of CIP or non-CIP, context payload
includes data blocks only.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a preparation to queue IT packet with header. To enable
packet handler to fill the header, this commit uses kernel stack for
data structure of packet parameter in several part of this file.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The handlers for packet with CIP and without CIP include common codes.
This commit unifies them and remove an member for pointer to callback
function from data structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is minor code refactoring to split a function to generate CIP
header.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Usage of 16 bytes IR context header allows to handle context payload by
the same code for with-CIP and without-CIP packets.
This commit unifies both handlers of with-CIP and without-CIP packets.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IR context, some quadlets of packet payload can be included into
context header. This is good for packet with CIP header because the
context payload buffer can includes data blocks only for with-CIP and
without-CIP pakets.
This commit uses 16 bytes IR context header for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A parser for CIP header in incoming packet is enough large.
This commit splits it into a helper function to better looks of packet
handler.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value of pointer to payload buffer is computed in each packet
handler, however the pointer can be decided before call of packet
handler.
This commit adds an argument for the pointer to the packet handler to
reduce codes to compute for the pointer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current packet handler, the length of payload is given as an argument
of callback function, however this value is just required to process
payload of transferred isoc packet, thus just for IR context.
This commit replaces the argument for payload of packet with the
argument of context header. As a result, the length of payload is
computed in packet handler for IR context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is to distinguish variable of CIP header from variable of
isochronous context header.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IT context, header includes information of cycle to have processed
queued packet.
This commit uses the per-packet information to compute the cycle for
packet to be queued, instead of callback argument. In current
implementaion of ALSA IEC 61883-1/6 packet streaming engine, 48 packets
are queued at first to skip recent cycle. When IT context calls handler,
cycle information in header plus 48 cycle means the cycle to be going
to queue packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The header size parameter of 1394 OHCI IT context has no effect.
Besides the header size of queued packet is different from context
header.
This commit cleans codes relevant to these two headers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In callback handler of isochronous context for both direction, there're
common codes to cancel context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some parameters of struct amdtp_stream is dependent on direction.
This commit uses union for such parameters to distinguish from
common parameters.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now four events of this module have the same arguments and probe timing.
This commit adds a new event, 'amdtp_packet', and replace them. Filtering
functionality of tracing framework is available to pick up events for
inbound/outbound isochronous packets.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This modules handles two types of isochronous packet; one has CIP header
in IEC 61883-1/6 and another doesn't. The module also have tracing events
corresponding to the types of packet. To unify the events, one event
should be probed with or without CIP header.
This commit uses dynamic array for the events to be available for the
types of packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The most of tracing event in this module have the size of payload in
byte unit, however 'in_packet_without_header' event have the argument
in quadlet unit.
This commit change the unit for argument to be consistent.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tracing events for packets without CIP header have a parameter of
data_blocks/data_block_counter, but events for packets with CIP header
don't. This is not good to unify these events.
This commit adds the missing parameters to the events. In timing to
probe 'in_packet' event, data_blocks and data_block_counter are not
calculated yet. This commit also changes the timing.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An argument for CIP header in 'in_packet' event is not the same type in
'out_packet' event. This is not good to unify these events.
This commit uses the same type of argument for these events.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In kernel API of Linux FireWire subsystem, handlers of isochronous
receive (IR) context can get context headers as an argument of
callback. When 4 byte header is used, the context header includes
isochronous packet header for each packet. When 8 byte header is
used, it includes isochronous cycle as well.
ALSA IEC 61883-1/6 engine uses 4 byte header, and computes isochronous
cycle from the cycle of interrupt. The usage of 8 byte header can
obsolete the computation.
Furthermore, this change works well for a case that a series of
packet in one interrupt includes skipped isochronous cycle,
This commit uses 8 byte header to handle isochronous cycle.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds support for MOTU 8pre FireWire, which was shipped 2007
and nowadays already discontinued. Userspace applications can transmit
and receive PCM frames and MIDI messages for this model via ALSA PCM
interface and RawMidi/Sequencer interfaces.
Like the other models of MOTU FireWire series, this model has many
quirks in its CIP.
At first, data channels for two pairs of optical interfaces. At lower
sampling transmission frequency, i.e. 44.1 and 48.0 kHz, one pair is
available for ADAT data, thus 8 data chunks are transferred by CIP.
At middle sampling transmission frequency, i.e. 88.2 and 96.0 kHz,
two pairs are available to keep 8 chunks for ADAT data, thus CIP
still includes 8 data chunks.
Apart from data chunks for optical interface, CIP includes fixed number
of data chunks. In tx stream, two chunks for status message, eight
chunks for samples from analog 1-8 input, two chunks for mix-return.
In rx stream, two chunks for control message, two chunks for main 1-2
output, two chunks for phone 1-2 output, two chunks for dummy 1-2.
CIP header in tx stream includes quirks for its dbs and dbc fields.
The value of dbs field is fixed to 0x13, against its actual size.
The value of dbc field is firstly updated to 0x07 from zero, then
it's incremented continuously according to actual number of data h
blocks.
Finally, the model has own bits to disable frame fetch.
This commit uses several options to absorb the above quirks.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0410b57d bus_info_length 4, crc_length 16, crc 46461
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 00083dfb device_id 0000083dfb | EUI-64 0001f20000083dfb
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003991c directory_length 3, crc 39196
42c 120001f2 specifier id
430 1300000f version
434 17103800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 00022681 leaf_length 2, crc 9857
43c 0001f200 company_id 0001f2 |
440 00083dfb device_id 0000083dfb | EUI-64 0001f20000083dfb
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current ALSA firewire-motu driver uses the value of 'model' field
of unit directory in configuration ROM for modalias for MOTU
FireWire models. However, as long as I checked, Pre8 and
828mk3(Hybrid) have the same value for the field (=0x100800).
unit | version | model
--------------- | --------- | ----------
828mkII | 0x000003 | 0x101800
Traveler | 0x000009 | 0x107800
Pre8 | 0x00000f | 0x100800 <-
828mk3(FW) | 0x000015 | 0x106800
AudioExpress | 0x000033 | 0x104800
828mk3(Hybrid) | 0x000035 | 0x100800 <-
When updating firmware for MOTU 8pre FireWire from v1.0.0 to v1.0.3,
I got change of the value from 0x100800 to 0x103800. On the other
hand, the value of 'version' field is fixed to 0x00000f. As a quick
glance, the higher 12 bits of the value of 'version' field represent
firmware version, while the lower 12 bits is unknown.
By induction, the value of 'version' field represents actual model.
This commit changes modalias to match the value of 'version' field,
instead of 'model' field. For degug, long name of added sound card
includes hexadecimal value of 'model' field.
Fixes: 6c5e1ac0e1 ("ALSA: firewire-motu: add support for Motu Traveler")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In data blocks of common isochronous packet for MOTU devices, PCM
frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described
in IEC 61883-6. The frames are not aligned to quadlet.
For capture PCM substream, ALSA firewire-motu driver constructs PCM
frames by reading data blocks byte-by-byte. However this operation
includes bug for lower byte of the PCM sample. This brings invalid
content of the PCM samples.
This commit fixes the bug.
Reported-by: Peter Sjöberg <autopeter@gmail.com>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 4641c93940 ("ALSA: firewire-motu: add MOTU specific protocol layer")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The calls of snd_info_register() are superfluous and should be avoided
at the procfs creation time. They are called at the end of the whole
initialization via snd_card_register(). This patch drops such
superfluous calls.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Duende Classic was produced by Solid State Logic in 2006, as a
first model of Duende DSP series. The following model, Duende Mini
was produced in 2008. They are designed to receive isochronous
packets for PCM frames via IEEE 1394 bus, perform signal processing by
downloaded program, then transfer isochronous packets for converted
PCM frames.
These two models includes the same embedded board, consists of several
ICs below:
- Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus
- WaveFront semiconductor, DICE II STD ASIC for link/protocol layer
- Altera MAX 3000A CPLD for programs
- Analog devices, SHARC ADSP-21363 for signal processing (4 chips)
This commit adds support for the two models to ALSA dice driver. Like
support for the other devices, packet streaming is just available.
Userspace applications should be developed if full features became
available; e.g. program uploader and parameter controller.
$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
'bmc': False,
'chip_ID': 349771402425,
'cmc': True,
'cyc_clk_acc': 255,
'generation': 1,
'imc': True,
'isc': True,
'link_spd': 2,
'max_ROM': 1,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 20674,
'pmc': False},
'root-directory': [ ['VENDOR', 20674],
['DESCRIPTOR', 'Solid State Logic'],
['MODEL', 112],
['DESCRIPTOR', 'Duende board'],
[ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': True},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
[ 'UNIT',
[ ['SPECIFIER_ID', 20674],
['VERSION', 1],
['MODEL', 112],
['DESCRIPTOR', 'Duende board']]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The > should be >= or otherwise we potentially read one element beyond
the end of the ff->tx_midi_substreams[] array.
Fixes: 73f5537fb2 ("ALSA: fireface: support tx MIDI functionality of Fireface UCX")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In Fireface series, registration of higher 4 bytes of destination
address for asynchronous transaction of MIDI messages is done by
a write transaction to model-specific register.
On the other hand, registration of lower 4 bytes of the address is
selectable from 4 options. A register for this registration includes
the other purpose options such as input attenuation. Thus this
driver expects userspace applications to configure the register.
Actual behaviour for the asynchronous transaction is different
depending on protocols. In former protocol, destination offset
of each transaction is the same as the registered address even if
it is block request. In latter models, destination offset of each
transaction is the offset of previous transaction plus 4 byte
and the transaction is quadlet request.
This commit cleanups comments about the above mechanism.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In latter model of Fireface series, asynchronous transaction includes
a prefix byte to indicate the way to decode included MIDI bytes.
Upper 4 bits of the prefix byte indicates port number, and the rest 4
bits indicate the way to decode rest of bytes for MIDI messages.
Basically the rest bits indicates the number of bytes for MIDI message.
However, if the last byte of each MIDi message is included, the rest
bits are 0xf. For example:
message: f0 00 00 66 14 20 00 00 f7
offset: content (big endian, port 0)
'0030: 0x02f00000
'0030: 0x03006614
'0030: 0x03200000
'0030: 0x0ff70000
This commit supports encoding scheme for the above and allows
applications to transfer MIDI messages via ALSA rawmidi interface.
An unused member (running_status) is reused to keep state of
transmission of system exclusive messages.
For your information, this is a dump of config rom.
$ sudo ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'bmc': False,
'chip_ID': 13225063715,
'cmc': False,
'cyc_clk_acc': 0,
'imc': False,
'isc': True,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 2613},
'root-directory': [ [ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': False},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
['VENDOR', 2613],
['DESCRIPTOR', 'RME!'],
['EUI_64', 2873037108442403],
[ 'UNIT',
[ ['SPECIFIER_ID', 2613],
['VERSION', 4],
['MODEL', 1054720],
['DESCRIPTOR', 'Fireface UCX']]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Between former and latter models, content of asynchronous transaction
for MIDI messages from driver to device is different.
This commit is a preparation to support latter models. A protocol-specific
operation is added to encode MIDI messages to the transaction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Between former and latter models, destination address to receive
asynchronous transactions for MIDI messages is different.
This commit adds model-dependent parameter for the addresses.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface UCX transfers asynchronous transactions for MIDI messages.
One transaction includes quadlet data therefore it can transfer 3
message bytes as maximum. Base address of the destination is
configured by two settings; a register for higher 8 byte of the
address, and a bitflag to option register indicates lower 8byte.
The register for higher address is 0x'ffff'0000'0034. Unfortunately,
firmware v24 includes a bug to ignore registered value for the
destination address and transfers to 0x0001xxxxxxxx always. This
driver doesn't work well if the bug exists, therefore users should
install the latest firmware (v27).
The bitflag is a part of value to be written to option register
(0x'ffff'0000'0014).
lower addr: bitflag (little endian)
'0000'0000: 0x00002000
'0000'0080: 0x00004000
'0000'0100: 0x00008000
'0000'0180: 0x00010000
This register includes more options but they are not relevant to
packet streaming or MIDI functionality. This driver don't touch it.
Furthermore, the transaction is sent to address offset incremented
by 4 byte to the offset in previous time. When it reaches base address
plus 0x7c, next offset is the base address.
Content of the transaction includes a prefix byte. Upper 4 bits of
the byte indicates port number, and the rest 4 bits indicate the way
to decode rest of bytes for MIDI message.
Except for system exclusive messages, the rest bits are the same as
status bits of the message without channel bits. For system exclusive
messages, the rest bits are encoded according to included message bytes.
For example:
message: f0 7e 7f 09 01 f7
offset: content (little endian, port 0)
'0000: 0x04f07e7f
'0004: 0x070901f7
message: f0 00 00 66 14 20 00 00 00 f7
offset: content (little endian, port 1)
'0014: 0x14f00000
'0018: 0x14661420
'001c: 0x14000000
'0020: 0x15f70000
message: f0 00 00 66 14 20 00 00 f7
offset: content (little endian, port 0)
'0078: 0x04f00000
'007c: 0x04661420
'0000: 0x070000f7
This commit supports decoding scheme for the above and allows
applications to receive MIDI messages via ALSA rawmidi interface.
The lower 8 bytes of destination address is fixed to 0x'0000'0000,
thus this driver expects userspace applications to configure option
register with bitflag 0x00002000 in advance.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In Fireface series, drivers can register destination address for
asynchronous transaction which transfers MIDI messages from device.
In former models, all of the transactions arrive at the registered
address without any offset. In latter models, each of the transaction
arrives at the registered address with sequential offset within 0x00
to 0x7f. This seems to be for discontinuity detection.
This commit adds model-dependent member for the address range.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a series of Fireface, devices transfer asynchronous transaction with
MIDI messages. In the transaction, content is different depending on
models. ALSA fireface driver has protocol-dependent handler to pick up
MIDI messages from the content.
In latter models of the series, the transaction is transferred to range
of address sequentially. This seems to check continuity of transferred
messages.
This commit changes prototype of the handler to receive offset of
address for received transactions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface UFX was shipped by RME GmbH in 2012. This model supports later
protocol for management of isochronous communication and synchronization
of sampling transmission frequency.
This commit adds support for the model. At present, it's not clear how
to encode MIDI messages and decide destination address for asynchronous
transaction, thus this commit adds support for isochronous communication
for PCM frames only.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A procedure to retrieve clock configuration is used by two callers.
Each of caller has duplicated code to parse bits.
This commit adds refactoring to remove the duplicated code.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds refactoring for dump of sync status by adding
tables for check bits.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a member for a callback function to get clock status
to former protocol.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a member for a callback function to switch frame
fetching mode to former protocol.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a member for a callback function to dump status and
move existing code to former protocol.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a series of Fireface, latter protocol has no way for drivers to
retrieve current clock configuration. On the other hand, this driver
has proc node for it.
This commit removes a proc node to dump both clock configuration
and synchronization status in one proc node.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit moves codes for Fireface 400 to a file of former protocol.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a series of Fireface, later model supports different protocol
from former models.
This commit is a preparation to support both of protocols.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a result of investigation for Fireface 800, 'struct snd_ff_spec.regs'
is just for higher address to receive tx asynchronous packets of MIDI
messages, thus it can be simplified.
This commit simplifies it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds a functionality to multiplex PCM frames into isochronous
packets and demultiplex PCM frames from isochronous packets for ALSA PCM
applications.
Fireface 800 voluntarily maintains resources for tx isochronous
communication. It performs reservation of isochronous channel and
allocation/update of bandwidth in some cases below:
- at a first request to allocation after bus resets
- at requests to allocation when further bandwidth is required
When request is grant and the unit is prepared, read data from
0x0000801c0008 represents isochronous channel for tx stream, then
the unit can handle requests to start communication. If driver
send the request without checking the register, the unit takes
panic to continue bus resets. The unit starts transmission of
tx packets after receiving several rx packets from driver.
I note that the unit can process tx/rx packets and generate/record
sound regardless of HOST LED.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The way to maintain isochronous resources on bus is different between
Fireface 400/800.
This commit is a preparation. This commit moves a function to allocate resource to
model-dependent implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface 400/800 use three modes against the number of data channels in
data block for both tx/rx packets.
This commit adds refactoring for it. Some enumerators are added to
represent each of mode and a function is added to calculate the mode
from sampling frequency code (sfc).
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both of Fireface 400/800 have the same register to switch frame fetching
mode regardless of difference of available number of PCM frames in
rx isochronous packet.
This commit moves a helper function from model-dependent implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
According to my memo at hand and saved records, writing 0x00000001 to
SND_FF_REG_FETCH_PCM_FRAMES disables fetching PCM frames in corresponding
channel, however current implement uses reversed logic. This results in
muted volume in device side during playback.
This commit corrects the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 76fdb3a9e1 ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An initial commit to add tracepoints for packets without CIP headers
uses different print formats for added tracepoints. However this is not
convenient for users/developers to prepare debug tools.
This commit uses the same format for the two tracepoints.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: b164d2fd6e ('ALSA: firewire_lib: add tracepoints for packets without CIP headers')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An initial commit to add tracepoints for packets without CIP headers
introduces a wrong assignment to 'data_blocks' value of
'out_packet_without_header' tracepoint.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: b164d2fd6e ('ALSA: firewire_lib: add tracepoints for packets without CIP headers')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In IEC 61883-1/6 engine of ALSA firewire stack, a packet handler has a
second argument for 'the number of bytes in payload of isochronous
packet'. However, an incoming packet handler without CIP header uses the
value as 'the number of quadlets in the payload'. This brings userspace
applications to receive the number of PCM frames as four times against
real time.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 3b196c394d ('ALSA: firewire-lib: add no-header packet processing')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface 800 is a flagship model of RME GmbH for audio and music units
on IEEE 1394 bus, shipped 2004. This model consists of four chips:
- TI TSB81BA3D for physical layer on cable environment of EEE 1394 bus
- TI TSB82AA2 for link layer for 1394 OHCI bus bridge to PCI bus
- Xilinx Spartan-3 FPGA XC3S400
- Xilinx High-Performance CPLD XC9572XL
This commit adds support Fireface 800. In this time, the support is
restricted to its MIDI functionality, thus this commit adds some
condition statements to avoid touching streaming functionality.
Unlike Fireface 400, Fireface 800 has no functionality to suppress
asynchronous transactions for MIDI messages except for unregister of
listen address in controller side, thus the feature is available as is.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Content of asynchronous transaction for MIDI messages differs between
Fireface 400 and 800.
This commit adds a model-specific handler for the transaction and adds
arrangement.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fireface 400 and 800 have the same mechanism to decide address to which
asynchronous transactions are sent for MIDI messages, however they use
different registers for controllers to notify higher 4 byte of the
address.
This commit adds a model-specific parameter to represent the address.
Additionally, it corrects some comments. I note that these two models have
a difference to enable/disable the transaction.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as investigating packet dumps from Fireface 400/800, a register
to receive asynchronous transactions for MIDI messages is the same. For
Fireface 800, minor register is used.
This commit declares macros for the transactions and obsoletes
model-specific parameters.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike Fireface 400, Fireface 800 have two pair of optical interface
for ADAT signal and S/PDIF signal. ADAT signals for the interface
are handled for sampling clock source separately.
This commit modifies a parser for clock configuration to distinguish
these two ADAT signals.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as investigating packet dumps from Fireface 400/800, bits on
status registers for clock synchronization are the same.
This commit moves a parser for a register of clock configuration to
obsolete model-specific operations.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as investigating packet dumps from Fireface 400/800, bits on
status registers for clock synchronization are the same.
This commit moves a parser for the registers to obsolete model-specific
operations.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as investigating packet dumps from Fireface 400/800, status
registers for clock synchronization is common.
This commit moves some macros for them to header file.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In an initial commit, 'SYNC_STATUS' register is referred to get
clock configuration, however this is wrong, according to my local
note at hand for reverse-engineering about packet dump. It should
be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config()
is correctly programmed.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 76fdb3a9e1 ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, ALSA firewire-tascam driver queues events to notify
change of state of control surface to userspace via ALSA hwdep
interface.
This commit implements actual notification of the events. The events are
not governed by real time, thus no need to care underrun.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In later commits, ALSA firewire-tascam driver will allow userspace
applications to receive notifications about changes of device state,
transferred in tx isochronous packet. At present, all of drivers in ALSA
firewire stack have mechanism to notify change of status of packet
streaming, thus it needs to distinguish these two types of notification.
This commit is a preparation for the above.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Units of TASCAM FireWire series transfer image of states of the unit in
tx isochronous packets. Demultiplexing of the states from the packets
is done in software interrupt context regardless of any process context.
In a view of userspace applications, it needs to have notification
mechanism to catch change of the states.
This commit implements a queue to store events for the notification. The
image of states includes fluctuating data such as level of gain/volume
for physical input/output and position of knobs. Therefore the events
are queued corresponding to some control features only.
Furthermore, the queued events are planned to be consumed by userspace
applications via ALSA hwdep interface. This commit suppresses event
queueing when no applications open the hwdep interface.
However, the queue is maintained in an optimistic scenario, thus without
any care against overrrun. This is reasonable because target events are
useless just to handle PCM frames. It starts queueing when an usespace
application opens hwdep interface, thus it's expected to read the queued
events steadily.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a previous commit, ALSA firewire-tascam driver stores state image
from tx isochronous packets. This image includes states of knob, fader,
button of control surface, level of gain/volume of each physical
inputs/outputs, and so on. It's useful for userspace applications to
read whole of the image.
This commit adds a unique ioctl command for ALSA hwdep interface for the
purpose. For actual meaning of each bits in this image, please refer to
discussion in alsa-devel[1].
[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2018-October/140785.html
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Units of TASCAM FireWire series multiplex PCM frames and state of
control surface into the same tx isochronous packets. One isochronous
packet includes a part of the state in a quadlet data. An image of the
state consists of 64 quadlet data.
This commit demultiplexes the state from tx isochronous packets.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a former commit, PCM constraint based on LCM of SYT_INTERVAL was
obsoleted with PCM rule. However, the new PCM rule brings -EINVAL in
some cases that max/min values of size of buffer/period is not
multiples of one of values of SYT_INTERVAL. For example, pulseaudio
always fail to configure PCM substream.
This commit changes strategy for the PCM rule. Although the buggy rules
had a single dependency (rate from period, period from rate, rate from
buffer, buffer from rate), a revised rule has double dependencies
(period from period/rate, buffer from buffer/rate). A step of value is
calculated with table of SYT_INTERVAL and list of available rates. This
prevents interval template which brings -EINVAL to a call of
snd_interval_refine().
Fixes: 5950229582bc('ALSA: firewire-lib: add PCM rules to obsolete PCM constraints based on LCM of SYT_INTERVAL')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a development period for Linux kernel v4.20, drivers in ALSA firewire
stack were changed to wait for releases of all ALSA character devices at
.remove callback of bus driver. However, ALSA dice driver is partly out
of this change. This bug can bring fault to user process which holds
the last of character device in unplugging.
This commit fixes the driver to wait in the callback.
Fixes: 61ccc6f6b2 ('ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In some error paths, reference count of firewire unit is not decreased.
This commit fixes the bug.
Fixes: 5b14ec25a79b('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, .private_free callback releases resources just for
data transmission. This release function can be called without the
resources are actually allocated in error paths.
This commit applies a small refactoring to clean up codes in error
paths.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In drivers of ALSA firewire stack, bebob and fireworks drivers have
local device entry table. At present, critical section to operate the
table is from the beginning/end of 'do_registration' call. This can be
more narrow and simplify codes.
This commit applies small refactoring for the above purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a previous commit, drivers in ALSA firewire stack blocks .remove
callback of bus driver. This enables to release members of private
data in the callback after releasing device of sound card.
This commit simplifies codes to release the members.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, in .remove callback of bus driver just decrease reference
count of device for ALSA card instance. This delegates release of the
device to a process in which the last of ALSA character device is
released.
On the other hand, the other drivers such as for devices on PCIe are
programmed to block .remove callback of bus driver till all of ALSA
character devices are released.
For consistency of behaviour for whole drivers, this probably confuses
users. This commit takes drivers in ALSA firewire stack to imitate the
above behaviour.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA oxfw driver allocates memory objects for cache of stream formats.
The objects are used to maintain packet streaming by components for
ALSA rawMIDI/PCM interface. They can be released as managed-resource
of 'struct snd_card.card_dev'.
This commit uses managed-resource of the sound card device for this
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA oxfw driver allocates memory objects for data specific to some
models. These objects are used to maintain functionalities specific
to the models for ALSA rawMIDI/control interfaces. They can be
released as managed-resource of 'struct snd_card.card_dev'.
This commit uses managed-resource of the sound card device for this
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA fireworks driver allocates memory object to handle response from
target unit. The object is used to initiate transaction unique to
Fireworks board module. This can be released as managed-resource
of 'struct snd_card.card_dev'.
This commit uses managed-resource of the sound card device for this
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA bebob driver allocates memory object for data specific to M-Audio
FW-1884/ProjectMix I/O. The object is to maintain format of isochronous
packet payload for packet streaming by components for ALSA rawMIDI/PCM
interfaces. The object can be released as managed-resource of
'struct snd_card.card_dev'.
This commit uses managed-resource of the sound card device for this
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, private data of each driver in ALSA firewire stack is
allocated/freed by kernel slab allocator for corresponding unit on
IEEE 1394 bus. In this case, resource-managed slab allocator is
available to release memory object automatically just before releasing
device structure for the unit. This idea can prevent runtime from
memory leak due to programming mistakes.
This commit uses the allocator for the private data. These drivers
already use reference counter to maintain lifetime of device structure
for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data
is safely released in a callback of 'struct snd_card.private_free().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In blocking mode of IEC 61883-1/6, when one isochronous packet includes
data for events, the data is for the same number of events as
SYT_INTERVAL decided according to sampling transmission frequency (SFC).
IEC 61883-1/6 engine of ALSA firewire stack applies constraints of
period and buffer size of PCM intermediate buffer of PCM substream.
At present, this constraint is designed to round the size up/down to
32 frames. This value comes from the least common multiple (LCM) of
SYT_INTERVAL. Although this looks to work well, in lower sampling
rate, applications are not allowed to set size of period quite near
period time constraint (at present 5 msec per period).
This commit adds PCM rules for period/buffer size and rate to obsoletes
the constraints based on LCM.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After allocating memory object for response buffer, ALSA fireworks
driver has leak of the memory object at error path.
This commit releases the object at the error path.
Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After finishing discover of stream formats, ALSA OXFW driver has memory
leak of allocated memory object at error path.
This commit releases the memory object at the error path.
Fixes: 6c29230e2a ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After allocating model-dependent data, ALSA OXFW driver has memory leak
of the data at error path.
This commit releases the data at the error path.
Fixes: 6c29230e2a ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After allocating model-dependent data for M-Audio FW1814 and ProjectMix
I/O, ALSA bebob driver has memory leak at error path.
This commit releases the allocated data at the error path.
Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.
This commit fixes memory leak following to the above design.
Fixes: 6c29230e2a ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.
This commit fixes memory leak following to the above design.
Fixes: b610386c8a ('ALSA: firewire-tascam: deleyed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although private data of sound card instance is usually allocated in the
tail of the instance, drivers in ALSA firewire stack allocate the private
data before allocating the instance. In this case, the private data
should be released explicitly at .private_free callback of the instance.
This commit fixes memory leak following to the above design.
Fixes: 86c8dd7f4d ('ALSA: firewire-digi00x: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST',
an address of 'payload' argument is used for streaming DMA mapping by
'firewire_ohci' module if 'size' argument is larger than 8 byte.
Although in this case the address should not be on kernel stack, current
implementation of ALSA bebob driver uses data in kernel stack for a cue
to boot M-Audio devices. This often brings unexpected result, especially
for a case of CONFIG_VMAP_STACK=y.
This commit fixes the bug.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021
Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165
Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series')
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A commit 28b208f600 ('ALSA: dice: add parameters of stream formats for
models produced by Alesis') adds wrong copy to rx parameters instead of
tx parameters for Alesis iO26.
This commit fixes the bug for v4.18-rc8.
Fixes: 28b208f600 ('ALSA: dice: add parameters of stream formats for models produced by Alesis')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v4.18
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with
somewhat special for vmalloc handling, but in the end, this turned to
just the default handler, i.e. NULL. As the situation has never
changed over decades, let's rip it off.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit adds support for MOTU Traveler, launched in 2005, discontinued
quite before. As a result, transmission of PCM frame and MIDI messages is
available via ALSA PCM and RawMIDI/Sequencer interfaces.
This model supports sampling transmission frequency up to 192.0 kHz, and
AES/EBU on XLR interface and ADAT on optical interface. Unlike
Motu 828MkII, Windows driver can switch fetching mode for DSP, like
mute/unmute feature.
Although this commit enables high sampling transmission frequency, actual
sound from this model is not good. As long as I tested, it's silence at
176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I
reported at 3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol
layer'), timestamping on source packet header (SPH) may not still be good
for this model as well.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04106505 bus_info_length 4, crc_length 16, crc 25861
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 0001f32f device_id 000001f32f | EUI-64 0001f2000001f32f
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 00035955 directory_length 3, crc 22869
42c 120001f2 specifier id
430 13000009 version
434 17107800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 000206b2 leaf_length 2, crc 1714
43c 0001f200 company_id 0001f2 |
440 0001f32f device_id 000001f32f | EUI-64 0001f2000001f32f
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For MOTU protocol version 2, this driver arranges the number of data
chunks to align chunks to quadlet data channel. However, MOTU Traveler
has padding bytes in the end of data block at high clock mode.
This commit removes the arrangement. Fortunately, at low and middle clock
mode, supported model for v2 protocol (828mkII) gets no influence from this
change because all of combination for data chunks are just aligned to
quadlet data channel.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.
This commit adds a flag for the separated main data chunk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In MOTU firewire protocol, data block consists of 24 bit data chunks except
for one quadlet for source packet header (SPH). The number of data chunk in
a data block is different between three clock modes; low, middle and high.
When unit supports ADAT on optical interface, the data block includes some
chunks for ADAT channels. These ADAT chunks are unavailable at high mode.
This driver has local functions to calculate the number of ADAT chunks. But
They uses stack for three clock modes. This is useless for higher mode.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped one multi-line call to a single line
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, all of models produced by TC Electronic except for Konnekt Live
are supported with hard-coded their stream formats. Studio Konnekt 48 is
sore model to support dual streams for both directions. The second stream
has no MIDI conformant data channel in its data block. But current
implementation transfers the second stream with MIDI conformant data
channel.
This commit fixes this issue.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
match_string() returns the index of an array for a matching string,
which can be used intead of open coded variant.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "entry" pointer is always non-NULL so this test for out of bounds
won't work.
Fixes: f1f0f330b1 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
--nextPart3916812.EicPReet6m
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
Mytek manufactures some equipment with DICE-based firewire ports. These
devices contain old versions of DICE firmware which lacks detailed
stream format reporting for all sampling clock modes.
Building upon the recent work by Takashi Sakamoto, hard-coded parameters
are added for the Stereo 192 DSD-DAC. When the device vendor and model
match the coded parameters are copied into the stream format cache.
Signed-off-by: Melvin Vermeeren <mail@mel.vin>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, to add PCM substreams for each of available tx/rx streams,
this driver uses a condition based on model-name. This is not enough
to support unknown models.
In former commits, this driver gains cache of stream formats. For models
which support protocol extension, all of available steam formats are
cached. For known models, hard-coded stream formats are used to generate
the cache. For unknown models, stream formats at current mode of sampling
transmission frequency is cached.
Anyway, at least, the cached formats are used to expose constrains of PCM
substreams for userspace applications. Thus, The cached data can be also
used to add PCM substreams themselves, instead of the name-based
conditions.
This commit obsoletes local frag of force_two_pcms.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, proxy structure gets members for cache of stream
formats. The cache allows to apply correct constraints and rules to
runtime of PCM substream. They allows userspace applications to change
current sampling transmission frequency.
This commit uses the cacher for the PCM constraints and rules.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, proxy structure gets members for cache of stream
formats. The cache can be used to count the number of MIDI substreams
to add.
This commit uses the cache for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preparation for userspace applications to change current sampling
transmission frequency via ALSA PCM interface.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a small refactoring for better readability.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, to check running stream, available stream formats are used
at current sampling transmission frequency (stf). But when changing stf,
it's convenient to use cache of stream formats.
This commit applies this idea.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TC Applied Technologies (TCAT) have added extension to DICE protocol. This
protocol extension is called as Extended Application Protocol, a.k.a. EAP.
In this protocol extension, units get additional 9 address spaces. One of
it is for current configuration. In this address space, a pair of router
and stream formats are exposed per mode of three sampling transmission
frequencies.
This commit adds support the protocol extension for address space of the
current configuration to generate cache of stream formats.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alesis shipped some models with DICE ASICs. All of them just support
DICE original protocol and drivers can't retrieve all of available stream
formats without changing status of sampling transmission frequency
actually.
This commit puts some hard-coded parameters for the models. When detecting
the models, the corresponding parameters are copied as cache of stream
formats.
I note that each of pair of iO14/iO26 and MultiMix 8/12/16 has the same
model ID on their configuration ROM. The MultiMix 8/12/16 just support
one mode for sampling transmission frequency and ALSA dice driver already
handles them correctly. The iO14/iO26 support three modes and need
hard-coded parameters. To distinguish these two models, this commit let
the driver to retrieve current stream formats and compare it to known
parameters, then decide it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TC Electronic shipped some models with DICE ASICs. All of them just support
DICE original protocol and drivers can't retrieve all of available stream
formats without changing status of sampling transmission frequency
actually.
This commit puts some hard-coded parameters for the models. When detecting
the models, the corresponding parameters are copied as cache of stream
formats.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In former commits, proxy structure get members for cache of stream
formats. This commit fills the cache with stream formats at current mode
of sampling transmission frequency.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Products with DICE interface in market can support variable stream
formats for three levels of sampling transmission frequencies. To
record these formats, a proxy structure got several fields in former
commit.
This commit adds a proc node to output the stream formats for debugging
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the other drivers in ALSA firewire stack, ALSA dice driver does't
create 'firewire' directory for proc nodes because it has 'dice' node
only. But this is inconvenient because I have a plan to add another proc
node to output available stream formats from cache.
This commit let the driver to create the directory and put 'dice' node
into it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A previous commit 6f688268b3 ('ALSA: dice: purge generating channel
cache') purged cache of stream formats. DICE interface originally has
no feature to assist drivers to retrieve available formats for all of
supported sampling transmission frequencies, without changing the
frequency actually.
For later release of Dice ASICs such as TCD2210, Dice interface has
extended protocol and can support the feature. This assists drivers
to retrieve available stream formats.
This commit is a first step to regain the cache to generate PCM rules
for all of supported sampling transmission frequencies.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At a commit f91c9d7610 ('ALSA: firewire-lib: cache maximum length of
payload to reduce function calls'), maximum size of payload for tx
isochronous packet is cached to reduce the number of function calls.
This cache was programmed to updated at a first callback of ohci1394 IR
context. However, the maximum size is required to queueing packets before
starting the isochronous context.
As a result, the cached value is reused to queue packets in next time to
starting the isochronous context. Then the cache is updated in a first
callback of the isochronous context. This can cause kernel NULL pointer
dereference in a below call graph:
(sound/firewire/amdtp-stream.c)
amdtp_stream_start()
->queue_in_packet()
->queue_packet()
(drivers/firewire/core-iso.c)
->fw_iso_context_queue()
->struct fw_card_driver.queue_iso()
(drivers/firewire/ohci.c)
= ohci_queue_iso()
->queue_iso_packet_per_buffer()
buffer->pages[page]
The issued dereference occurs in a case that:
- target unit supports different stream formats for sampling transmission
frequency.
- maximum length of payload for tx stream in a first trial is bigger
than the length in a second trial.
In this case, correct number of pages are allocated for DMA and the 'pages'
array has enough elements, while index of the element is wrongly calculated
according to the old value of length of payload in a call of
'queue_in_packet()'. Then it causes the issue.
This commit fixes the critical bug. This affects all of drivers in ALSA
firewire stack in Linux kernel v4.12 or later.
[12665.302360] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[12665.302415] IP: ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.302439] PGD 0
[12665.302440] P4D 0
[12665.302450]
[12665.302470] Oops: 0000 [#1] SMP PTI
[12665.302487] Modules linked in: ...
[12665.303096] CPU: 1 PID: 12760 Comm: jackd Tainted: P OE 4.13.0-38-generic #43-Ubuntu
[12665.303154] Hardware name: /DH77DF, BIOS KCH7710H.86A.0069.2012.0224.1825 02/24/2012
[12665.303215] task: ffff9ce87da2ae80 task.stack: ffffb5b8823d0000
[12665.303258] RIP: 0010:ohci_queue_iso+0x47c/0x800 [firewire_ohci]
[12665.303301] RSP: 0018:ffffb5b8823d3ab8 EFLAGS: 00010086
[12665.303337] RAX: ffff9ce4f4876930 RBX: 0000000000000008 RCX: ffff9ce88a3955e0
[12665.303384] RDX: 0000000000000000 RSI: 0000000034877f00 RDI: 0000000000000000
[12665.303427] RBP: ffffb5b8823d3b68 R08: ffff9ce8ccb390a0 R09: ffff9ce877639ab0
[12665.303475] R10: 0000000000000108 R11: 0000000000000000 R12: 0000000000000003
[12665.303513] R13: 0000000000000000 R14: ffff9ce4f4876950 R15: 0000000000000000
[12665.303554] FS: 00007f2ec467f8c0(0000) GS:ffff9ce8df280000(0000) knlGS:0000000000000000
[12665.303600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12665.303633] CR2: 0000000000000030 CR3: 00000002dcf90004 CR4: 00000000000606e0
[12665.303674] Call Trace:
[12665.303698] fw_iso_context_queue+0x18/0x20 [firewire_core]
[12665.303735] queue_packet+0x88/0xe0 [snd_firewire_lib]
[12665.303770] amdtp_stream_start+0x19b/0x270 [snd_firewire_lib]
[12665.303811] start_streams+0x276/0x3c0 [snd_dice]
[12665.303840] snd_dice_stream_start_duplex+0x1bf/0x480 [snd_dice]
[12665.303882] ? vma_gap_callbacks_rotate+0x1e/0x30
[12665.303914] ? __rb_insert_augmented+0xab/0x240
[12665.303936] capture_prepare+0x3c/0x70 [snd_dice]
[12665.303961] snd_pcm_do_prepare+0x1d/0x30 [snd_pcm]
[12665.303985] snd_pcm_action_single+0x3b/0x90 [snd_pcm]
[12665.304009] snd_pcm_action_nonatomic+0x68/0x70 [snd_pcm]
[12665.304035] snd_pcm_prepare+0x68/0x90 [snd_pcm]
[12665.304058] snd_pcm_common_ioctl1+0x4c0/0x940 [snd_pcm]
[12665.304083] snd_pcm_capture_ioctl1+0x19b/0x250 [snd_pcm]
[12665.304108] snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[12665.304131] do_vfs_ioctl+0xa8/0x630
[12665.304148] ? entry_SYSCALL_64_after_hwframe+0xe9/0x139
[12665.304172] ? entry_SYSCALL_64_after_hwframe+0xe2/0x139
[12665.304195] ? entry_SYSCALL_64_after_hwframe+0xdb/0x139
[12665.304218] ? entry_SYSCALL_64_after_hwframe+0xd4/0x139
[12665.304242] ? entry_SYSCALL_64_after_hwframe+0xcd/0x139
[12665.304265] ? entry_SYSCALL_64_after_hwframe+0xc6/0x139
[12665.304288] ? entry_SYSCALL_64_after_hwframe+0xbf/0x139
[12665.304312] ? entry_SYSCALL_64_after_hwframe+0xb8/0x139
[12665.304335] ? entry_SYSCALL_64_after_hwframe+0xb1/0x139
[12665.304358] SyS_ioctl+0x79/0x90
[12665.304374] ? entry_SYSCALL_64_after_hwframe+0x72/0x139
[12665.304397] entry_SYSCALL_64_fastpath+0x24/0xab
[12665.304417] RIP: 0033:0x7f2ec3750ef7
[12665.304433] RSP: 002b:00007fff99e31388 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[12665.304465] RAX: ffffffffffffffda RBX: 00007fff99e312f0 RCX: 00007f2ec3750ef7
[12665.304494] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000007
[12665.304522] RBP: 0000556ebc63fd60 R08: 0000556ebc640560 R09: 0000000000000000
[12665.304553] R10: 0000000000000001 R11: 0000000000000246 R12: 0000556ebc63fcf0
[12665.304584] R13: 0000000000000000 R14: 0000000000000007 R15: 0000000000000000
[12665.304612] Code: 01 00 00 44 89 eb 45 31 ed 45 31 db 66 41 89 1e 66 41 89 5e 0c 66 45 89 5e 0e 49 8b 49 08 49 63 d4 4d 85 c0 49 63 ff 48 8b 14 d1 <48> 8b 72 30 41 8d 14 37 41 89 56 04 48 63 d3 0f 84 ce 00 00 00
[12665.304713] RIP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] RSP: ffffb5b8823d3ab8
[12665.304743] CR2: 0000000000000030
[12665.317701] ---[ end trace 9d55b056dd52a19f ]---
Fixes: f91c9d7610 ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls')
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In error path of snd_dice_stream_init_duplex(), stream data for incoming
packet can be left to be initialized.
This commit fixes it.
Fixes: 436b5abe22 ('ALSA: dice: handle whole available isochronous streams')
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
