Remove the cl_recdir field from the nfs4_client struct. Instead, just
compute it on the fly when and if it's needed, which is now only when
the legacy client tracking code is in effect.
The error handling in the legacy client tracker is also changed to
handle the case where md5 is unavailable. In that case, we'll warn
the admin with a KERN_ERR message and disable the client tracking.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code requires that we md5 hash the name in order to store
the client in the confirmed and unconfirmed trees. Change it instead
to store the clients in a pair of rbtrees, and simply compare the
cl_names directly instead of hashing them. This also necessitates that
we add a new flag to the clp->cl_flags field to indicate which tree
the client is currently in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When nfsd starts, the legacy reboot recovery code creates a tracking
struct for each directory in the v4recoverydir. When the grace period
ends, it basically does a "readdir" on the directory again, and matches
each dentry in there to an existing client id to see if it should be
removed or not. If the matching client doesn't exist, or hasn't
reclaimed its state then it will remove that dentry.
This is pretty inefficient since it involves doing a lot of hash-bucket
searching. It also means that we have to keep relying on being able to
search for a nfs4_client by md5 hashed cl_recdir name.
Instead, add a pointer to the nfs4_client that indicates the association
between the nfs4_client_reclaim and nfs4_client. When a reclaim operation
comes in, we set the pointer to make that association. On gracedone, the
legacy client tracker will keep the recdir around iff:
1/ there is a reclaim record for the directory
...and...
2/ there's an association between the reclaim record and a client record
-- that is, a create or check operation was performed on the client that
matches that directory.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Later callers will need to make changes to the record.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We'll need to be able to call this from nfs4recover.c eventually.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it takes a client pointer, but later we're going to need to
search for these records without knowing whether a matching client even
exists.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're currently ignoring the callback security parameters specified in
create_session, and just assuming the client wants auth_sys, because
that's all the current linux client happens to care about. But this
could cause us callbacks to fail to a client that wanted something
different.
For now, all we're doing is no longer ignoring the uid and gid passed in
the auth_sys case. Further patches will add support for auth_null and
gss (and possibly use more of the auth_sys information; the spec wants
us to use exactly the credential we're passed, though it's hard to
imagine why a client would care).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These conditions would indeed indicate bugs in the code, but if we want
to hear about them we're likely better off warning and returning than
immediately dying while holding file_lock_lock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The object type in the cache of lockowner_slab is wrong, and it is
better to fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The variable inode is initialized but never used
otherwise, so remove the unused variable.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=etoL
-----END PGP SIGNATURE-----
nfs: disintegrate UAPI for nfs
This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently. After these patches, userspace
headers will be segregated into:
include/uapi/linux/.../foo.h
for the userspace interface stuff, and:
include/linux/.../foo.h
for the strictly kernel internal stuff.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When a confirmed client expires, we normally also need to expire any
stable storage record which would allow that client to reclaim state on
the next boot. We forgot to do this in some cases. (For example, in
destroy_clientid, and in the cases in exchange_id and create_session
that destroy and existing confirmed client.)
But in most other cases, there's really no harm to calling
nfsd4_client_record_remove(), because it is a no-op in the case the
client doesn't have an existing
The single exception is destroying a client on shutdown, when we want to
keep the stable storage records so we can recognize which clients will
be allowed to reclaim when we come back up.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Both nfsd4_init_conn and alloc_init_session are probing the callback
channel, harmless but pointless.
Also, nfsd4_init_conn should probably be probing in the "unknown" case
as well. In fact I don't see any harm to just doing it unconditionally
when we get a new backchannel connection.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Before we had to delay expiring a client till we'd found out whether the
session and connection allocations would succeed. That's no longer
necessary.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do the initialization in the caller, and clarify that the only failure
ever possible here was due to allocation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It'll be useful to have connection allocation and initialization as
separate functions.
Also, note we'd been ignoring the alloc_conn error return in
bind_conn_to_session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Something like creating a client with setclientid and then trying to
confirm it with create_session may not crash the server, but I'm not
completely positive of that, and in any case it's obviously bad client
behavior.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I added cr_flavor to the data compared in same_creds without any
justification, in d5497fc693 "nfsd4: move
rq_flavor into svc_cred".
Recent client changes then started making
mount -osec=krb5 server:/export /mnt/
echo "hello" >/mnt/TMP
umount /mnt/
mount -osec=krb5i server:/export /mnt/
echo "hello" >/mnt/TMP
to fail due to a clid_inuse on the second open.
Mounting sequentially like this with different flavors probably isn't
that common outside artificial tests. Also, the real bug here may be
that the server isn't just destroying the former clientid in this case
(because it isn't good enough at recognizing when the old state is
gone). But it prompted some discussion and a look back at the spec, and
I think the check was probably wrong. Fix and document.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Processes that open and close multiple files may end up setting this
oo_last_closed_stid without freeing what was previously pointed to.
This can result in a major leak, visible for example by watching the
nfsd4_stateids line of /proc/slabinfo.
Reported-by: Cyril B. <cbay@excellency.fr>
Tested-by: Cyril B. <cbay@excellency.fr>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
struct file_lock is pretty large and really ought not live on the stack.
On my x86_64 machine, they're almost 200 bytes each.
(gdb) p sizeof(struct file_lock)
$1 = 192
...allocate them dynamically instead.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The code checks for a NULL filp and handles it gracefully just before
this BUG_ON.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
locks.c doesn't use the BKL anymore and there is no fi_perfile field.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSd's boot_time represents grace period start point in time.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Passed network namespace replaced hard-coded init_net
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch adds recall_lock hold to nfsd_forget_delegations() to protect
nfsd_process_n_delegations() call.
Also, looks like it would be better to collect delegations to some local
on-stack list, and then unhash collected list. This split allows to
simplify locking, because delegation traversing is protected by recall_lock,
when delegation unhash is protected by client_mutex.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes a wrong check for same cr_principal in same_creds
Introduced by 8fbba96e5b "nfsd4: stricter
cred comparison for setclientid/exchange_id".
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't need to keep openowners around in the >=4.1 case, because they
aren't needed to handle CLOSE replays any more (that's a problem for
sessions). And doing so causes unexpected failures on a subsequent
destroy_clientid to fail.
We probably also need something comparable for lock owners on last
unlock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Share a little common logic. And note the comments here are a little
out of date (e.g. we don't always create new state in the "new" case any
more.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID. In addition, RFC 5661 says:
15.1.16.5. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used. This
error is moot in NFSv4.1 because all operations that take a stateid
MUST be preceded by the SEQUENCE operation, and the earlier server
instance is detected by the session infrastructure that supports
SEQUENCE.
I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery. Bruce suggested an additional test that could be
useful to client developers.
Lastly, RFC 5661, section 18.48.3 has this:
o Special stateids are always considered invalid (they result in the
error code NFS4ERR_BAD_STATEID).
An explicit check is made for those state IDs to avoid printk noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Initiate a CB probe when a new connection with the correct direction is added
to a session (IFF backchannel is marked as down). Without this a
BIND_CONN_TO_SESSION has no effect on the internal backchannel state, which
causes the server to reply to every SEQUENCE op with the
SEQ4_STATUS_CB_PATH_DOWN flag set until DESTROY_SESSION.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Most frequent symptom was a BUG triggering in expire_client, with the
server locking up shortly thereafter.
Introduced by 508dc6e110 "nfsd41:
free_session/free_client must be called under the client_lock".
Cc: stable@kernel.org
Cc: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull the rest of the nfsd commits from Bruce Fields:
"... and then I cherry-picked the remainder of the patches from the
head of my previous branch"
This is the rest of the original nfsd branch, rebased without the
delegation stuff that I thought really needed to be redone.
I don't like rebasing things like this in general, but in this situation
this was the lesser of two evils.
* 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits)
nfsd4: fix, consolidate client_has_state
nfsd4: don't remove rebooted client record until confirmation
nfsd4: remove some dprintk's and a comment
nfsd4: return "real" sequence id in confirmed case
nfsd4: fix exchange_id to return confirm flag
nfsd4: clarify that renewing expired client is a bug
nfsd4: simpler ordering of setclientid_confirm checks
nfsd4: setclientid: remove pointless assignment
nfsd4: fix error return in non-matching-creds case
nfsd4: fix setclientid_confirm same_cred check
nfsd4: merge 3 setclientid cases to 2
nfsd4: pull out common code from setclientid cases
nfsd4: merge last two setclientid cases
nfsd4: setclientid/confirm comment cleanup
nfsd4: setclientid remove unnecessary terms from a logical expression
nfsd4: move rq_flavor into svc_cred
nfsd4: stricter cred comparison for setclientid/exchange_id
nfsd4: move principal name into svc_cred
nfsd4: allow removing clients not holding state
nfsd4: rearrange exchange_id logic to simplify
...
Pull nfsd update from Bruce Fields.
* 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linux: (23 commits)
nfsd: trivial: use SEEK_SET instead of 0 in vfs_llseek
SUNRPC: split upcall function to extract reusable parts
nfsd: allocate id-to-name and name-to-id caches in per-net operations.
nfsd: make name-to-id cache allocated per network namespace context
nfsd: make id-to-name cache allocated per network namespace context
nfsd: pass network context to idmap init/exit functions
nfsd: allocate export and expkey caches in per-net operations.
nfsd: make expkey cache allocated per network namespace context
nfsd: make export cache allocated per network namespace context
nfsd: pass pointer to export cache down to stack wherever possible.
nfsd: pass network context to export caches init/shutdown routines
Lockd: pass network namespace to creation and destruction routines
NFSd: remove hard-coded dereferences to name-to-id and id-to-name caches
nfsd: pass pointer to expkey cache down to stack wherever possible.
nfsd: use hash table from cache detail in nfsd export seq ops
nfsd: pass svc_export_cache pointer as private data to "exports" seq file ops
nfsd: use exp_put() for svc_export_cache put
nfsd: use cache detail pointer from svc_export structure on cache put
nfsd: add link to owner cache detail to svc_export structure
nfsd: use passed cache_detail pointer expkey_parse()
...
Whoops: first, I reimplemented the already-existing has_resources
without noticing; second, I got the test backwards. I did pick a better
name, though. Combine the two....
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4.1 client-reboot case we're currently removing the client's
previous state in exchange_id. That's wrong--we should be waiting till
the confirming create_session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The comment is redundant, and if we really want dprintk's here they'd
probably be better in the common (check-slot_seqid) code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client should ignore the returned sequence_id in the case where the
CONFIRMED flag is set on an exchange_id reply--and in the unconfirmed
case "1" is always the right response. So it shouldn't actually matter
what we return here.
We could continue returning 1 just to catch clients ignoring the spec
here, but I'd rather be generous. Other things equal, returning the
existing sequence_id seems more informative.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Otherwise nfsd4_set_ex_flags writes over the return flags.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This can't happen:
- cl_time is zeroed only by unhash_client_locked, which is only
ever called under both the state lock and the client lock.
- every caller of renew_client() should have looked up a
(non-expired) client and then called renew_client() all
without dropping the state lock.
- the only other caller of renew_client_locked() is
release_session_client(), which first checks under the
client_lock that the cl_time is nonzero.
So make it clear that this is a bug, not something we handle. I can't
quite bring myself to make this a BUG(), though, as there are a lot of
renew_client() callers, and returning here is probably safer than a
BUG().
We'll consider making it a BUG() after some more cleanup.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cases here divide into two main categories:
- if there's an uncomfirmed record with a matching verifier,
then this is a "normal", succesful case: we're either creating
a new client, or updating an existing one.
- otherwise, this is a weird case: a replay, or a server reboot.
Reordering to reflect that makes the code a bit more concise and the
logic a lot easier to understand.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note CLID_INUSE is for the case where two clients are trying to use the
same client-provided long-form client identifiers. But what we're
looking at here is the server-returned shorthand client id--if those
clash there's a bug somewhere.
Fix the error return, pull the check out into common code, and do the
check unconditionally in all cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
New clients are created only by nfsd4_setclientid(), which always gives
any new client a unique clientid. The only exception is in the
"callback update" case, in which case it may create an unconfirmed
client with the same clientid as a confirmed client. In that case it
also checks that the confirmed client has the same credential.
Therefore, it is pointless for setclientid_confirm to check whether a
confirmed and unconfirmed client with the same clientid have matching
credentials--they're guaranteed to.
Instead, it should be checking whether the credential on the
setclientid_confirm matches either of those. Otherwise, it could be
anyone sending the setclientid_confirm. Granted, I can't see why anyone
would, but still it's probalby safer to check.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The typical setclientid or exchange_id will probably be performed with a
credential that maps to either root or nobody, so comparing just uid's
is unlikely to be useful. So, use everything else we can get our hands
on.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 5661 actually says we should allow an exchange_id to remove a
matching client, even if the exchange_id comes from a different
principal, *if* the victim client lacks any state.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Following rfc 5661 section 2.4.1, we can permit a 4.1 client to remove
an established 4.0 client's state.
(But we don't allow updates.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We mustn't allow a client to destroy another client with established
state unless it has the right credential.
And some minor cleanup.
(Note: our comparison of credentials is actually pretty bogus currently;
that will need to be fixed in another patch.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Handle the st_deny_bmap in a similar fashion to the st_access_bmap. Add
accessor functions and use those instead of bare bitops.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, we do this for the most part with "bare" bitops, but
eventually we'll need to expand the share mode code to handle access
and deny modes on other nodes.
In order to facilitate that code in the future, move to some generic
accessor functions. For now, these are mostly static inlines, but
eventually we'll want to move these to "real" functions that are
able to handle multi-node configurations or have a way to "swap in"
new operations to be done in lieu of or in conjunction with these
atomic bitops.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All of the callers treat the return that way already.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These functions are identical. Also, rename them to bmap_to_share_mode
to better reflect what they do, and have them just return the result
instead of passing in a pointer to the storage location.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 3530bis, the only items SETCLIENTID_CONFIRM processing
should be concerned with is the clientid, clientid verifier, and
principal. The client's IP address is not supposed to be interesting.
And, NFS4ERR_CLID_INUSE is meant only for principal mismatches.
I triggered this logic with a prototype UCS client -- one that
uses the same nfs_client_id4 string for all servers. The client
mounted our server via its IPv4, then via its IPv6 address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd_open() already returns an NFS error value; only vfs_test_lock()
result needs to be fed through nfserrno(). Broken by commit 55ef12
(nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT)
three years ago...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's possible that lockd or another lock manager might still be on the
list after we call nfsd4_end_grace. If the laundromat thread runs
again at that point, then we could end up calling nfsd4_end_grace more
than once.
That's not only inefficient, but calling nfsd4_recdir_purge_old more
than once could be problematic. Fix this by adding a new global
"grace_ended" flag and use that to determine whether we've already
called nfsd4_grace_end.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Abstract out the mechanism that we use to track clients into a set of
client name tracking functions.
This gives us a mechanism to plug in a new set of client tracking
functions without disturbing the callers. It also gives us a way to
decide on what tracking scheme to use at runtime.
For now, this just looks like pointless abstraction, but later we'll
add a new alternate scheme for tracking clients on stable storage.
Note too that this patch anticipates the eventual containerization
of this code by passing in struct net pointers in places. No attempt
is made to containerize the legacy client tracker however.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We'll need a way to flag the nfs4_client as already being recorded on
stable storage so that we don't continually upcall. Currently, that's
recorded in the cl_firststate field of the client struct. Using an
entire u32 to store a flag is rather wasteful though.
The cl_cb_flags field is only using 2 bits right now, so repurpose that
to a generic flags field. Rename NFSD4_CLIENT_KILL to
NFSD4_CLIENT_CB_KILL to make it evident that it's part of the callback
flags. Add a mask that we can use for existing checks that look to see
whether any flags are set, so that the new flags don't interfere.
Convert all references to cl_firstate to the NFSD4_CLIENT_STABLE flag,
and add a new NFSD4_CLIENT_RECLAIM_COMPLETE flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up due to code review.
The nfs4_verifier's data field is not guaranteed to be u32-aligned.
Casting an array of chars to a u32 * is considered generally
hazardous.
We can fix most of this by using a __be32 array to generate the
verifier's contents and then byte-copying it into the verifier field.
However, there is one spot where there is a backwards compatibility
constraint: the do_nfsd_create() call expects a verifier which is
32-bit aligned. Fix this spot by forcing the alignment of the create
verifier in the nfsd4_open args structure.
Also, sizeof(nfs4_verifer) is the size of the in-core verifier data
structure, but NFS4_VERIFIER_SIZE is the number of octets in an XDR'd
verifier. The two are not interchangeable, even if they happen to
have the same value.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The session client is manipulated under the client_lock hence
both free_session and nfsd4_del_conns must be called under this lock.
This patch adds a BUG_ON that checks this condition in the
respective functions and implements the missing locks.
nfsd4_{get,put}_session helpers were moved to the C file that uses them
so to prevent use from external files and an unlocked version of
nfsd4_put_session is provided for external use from nfs4xdr.c
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Handle the case where the nfsv4.1 client asked to uprade or downgrade
its delegations and server returns no delegation.
In this case, op_delegate_type is set to NFS4_OPEN_DELEGATE_NONE_EXT
and op_why_no_deleg is set respectively to WND4_NOT_SUPP_{UP,DOWN}GRADE
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When a 4.1 client asks for a delegation and the server returns none
op_delegate_type is set to NFS4_OPEN_DELEGATE_NONE_EXT
and op_why_no_deleg is set to either WND4_CONTENTION or WND4_RESOURCE.
Or, if the client sent a NFS4_SHARE_WANT_CANCEL (which it is not supposed
to ever do until our server supports delegations signaling),
op_why_no_deleg is set to WND4_CANCELLED.
Note that for WND4_CONTENTION and WND4_RESOURCE, the xdr layer is hard coded
at this time to encode boolean FALSE for ond_server_will_push_deleg /
ond_server_will_signal_avail.
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code never calls nfsd4_shutdown_recdir if nfs4_state_start
returns an error. Also, it's better to go ahead and consolidate these
functions since one is just a trivial wrapper around the other.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To escape having your stable storage record purged at the end of the
grace period, it's not sufficient to simply have performed a
setclientid_confirm; you also need to meet the same requirements as
someone creating a new record: either you should have done an open or
open reclaim (in the 4.0 case) or a reclaim_complete (in the 4.1 case).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We set cl_firststate when we first decide that a client will be
permitted to reclaim state on next boot. This happens:
- for new 4.0 clients, when they confirm their first open
- for returning 4.0 clients, when they reclaim their first open
- for 4.1+ clients, when they perform reclaim_complete
We also use cl_firststate to decide whether a reclaim_complete has
already been performed, in the 4.1+ case.
We were setting it on 4.1 open reclaims, which caused spurious
COMPLETE_ALREADY errors on RECLAIM_COMPLETE from an nfs4.1 client with
anything to reclaim.
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Respect client request for not getting a delegation in NFSv4.1
Appropriately return delegation "type" NFS4_OPEN_DELEGATE_NONE_EXT
and WND4_NOT_WANTED reason.
[nfsd41: add missing break when encoding op_why_no_deleg]
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When I initially wrote it, I didn't understand how lists worked so I
wrote something that didn't use them. I think making a list of stateids
to test is a more straightforward implementation, especially compared to
especially compared to decoding stateids while simultaneously encoding
a reply to the client.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it will not correctly ignore any nfsv4.1 signal flags
if the client sends them.
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes an oops when a buggy client tries to use an initial seqid of
0 on a new slot, which we may misinterpret as a replay.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Combine two booleans into a single flag field, move the smaller fields
to the end.
(In practice this doesn't make the struct any smaller. But we'll be
adding another flag here soon.)
Remove some debugging code that doesn't look useful, while we're in the
neighborhood.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
From RFC 5661 2.10.6.1: "If the previous sequence ID was 0xFFFFFFFF,
then the next request for the slot MUST have the sequence ID set to
zero."
While we're there, delete some redundant comments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Parametrize rpc_uaddr2sockaddr() by network context and thus force it's callers to pass
in network context instead of using hard-coded "init_net".
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-3.3' of git://linux-nfs.org/~bfields/linux: (31 commits)
nfsd4: nfsd4_create_clid_dir return value is unused
NFSD: Change name of extended attribute containing junction
svcrpc: don't revert to SVC_POOL_DEFAULT on nfsd shutdown
svcrpc: fix double-free on shutdown of nfsd after changing pool mode
nfsd4: be forgiving in the absence of the recovery directory
nfsd4: fix spurious 4.1 post-reboot failures
NFSD: forget_delegations should use list_for_each_entry_safe
NFSD: Only reinitilize the recall_lru list under the recall lock
nfsd4: initialize special stateid's at compile time
NFSd: use network-namespace-aware cache registering routines
SUNRPC: create svc_xprt in proper network namespace
svcrpc: update outdated BKL comment
nfsd41: allow non-reclaim open-by-fh's in 4.1
svcrpc: avoid memory-corruption on pool shutdown
svcrpc: destroy server sockets all at once
svcrpc: make svc_delete_xprt static
nfsd: Fix oops when parsing a 0 length export
nfsd4: Use kmemdup rather than duplicating its implementation
nfsd4: add a separate (lockowner, inode) lookup
nfsd4: fix CONFIG_NFSD_FAULT_INJECTION compile error
...
Otherwise the for loop could try to use a file recently removed from the
file_hashtbl list and oops.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Tested-by: Casey Bodley <cbodley@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
unhash_delegation() will grab the recall lock before calling
list_del_init() in each of these places. This patch removes the
redundant calls.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Stateid's with "other" ("opaque") field all zeros or all ones are
reserved. We define all_ones separately on the off chance there will be
more such some day, though currently all the other special stateid's
have zero other field.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Address the possible performance regression mentioned in "nfsd4: hash
lockowners to simplify RELEASE_LOCKOWNER" by providing a separate
(lockowner, inode) hash.
Really, I doubt this matters much, but I think it's likely we'll change
these data structures here and I'd rather that the need for (owner,
inode) lookups be well-documented.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that they're used in the same way, it's a little simpler to put open
and lock owners in the same hash table, and I can't see a reason not to.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Hash lockowners on just the owner string rather than on (owner, inode).
This makes the owner-string lookup needed for RELEASE_LOCKOWNER simpler
(currently it's doing at a linear search through the entire hash
table!). That may come at the expense of making (owner, inode) lookups
more expensive if a client reuses the same lockowner across multiple
files. We might add a separate lookup for that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
init_nfsd() was calling free_slabs() during cleanup code, but the call
to init_slabs() was hidden in nfsd4_state_init(). This could be
confusing to people unfamiliar with the code.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fault injection on the NFS server makes it easier to test the client's
state manager and recovery threads. Simulating errors on the server is
easier than finding the right conditions that cause them naturally.
This patch uses debugfs to add a simple framework for fault injection to
the server. This framework is a config option, and can be enabled
through CONFIG_NFSD_FAULT_INJECTION. Assuming you have debugfs mounted
to /sys/debug, a set of files will be created in /sys/debug/nfsd/.
Writing to any of these files will cause the corresponding action and
write a log entry to dmesg.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of creating a new lockowner and stateid for every
open_to_lockowner call, reuse the existing lockowner if it exists.
Reported-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Lockowners are looked up by file as well as by owner, but we were
forgetting to do a comparison on the file. This could cause an
incorrect result from lockt.
(Note looking up the inode from the lockowner is pretty awkward here.
The data structures need fixing.)
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to rfc5661 18.50, implement DESTROY_CLIENTID operation.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
0c12eaffdf "nfsd: don't break lease on
CLAIM_DELEGATE_CUR" was a temporary workaround for a problem fixed
properly in the vfs layer by 778fc546f7
"locks: fix tracking of inprogress lease breaks", so we can revert that
change (but keeping some minor cleanup from that commit).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As with the nfs4_file, we'd prefer to find out about any failure before
creating a new file rather than after.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move idr preallocation out of stateid initialization, into stateid
allocation, so that we no longer have to handle any errors from the
former.
This is a little subtle due to the way the idr code manages these
preallocated items--document that in comments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Creating a new file is an irrevocable step--once it's visible in the
filesystem, other processes may have seen it and done something with it,
and unlinking it wouldn't simply undo the effects of the create.
Therefore, in the case where OPEN creates a new file, we shouldn't do
the create until we know that the rest of the OPEN processing will
succeed.
For example, we should preallocate a struct file in case we need it
until waiting to allocate it till process_open2(), which is already too
late.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If process_open1() creates a new open owner, but the open later fails,
the current code will leave the open owner around. It won't be on the
close_lru list, and the client isn't expected to send a CLOSE, so it
will hang around as long as the client does.
Similarly, if process_open1() removes an existing open owner from the
close lru, anticipating that an open owner that previously had no
associated stateid's now will, but the open subsequently fails, then
we'll again be left with the same leak.
Fix both problems.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be any harm to renewing the client a bit earlier,
when it is looked up. That saves us from having to sprinkle
renew_client calls over quite so many places.
Also remove a redundant comment and do a little cleanup.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'd rather put more of these sorts of checks into standardized xdr
decoders for the various types rather than have them cluttering up the
core logic in nfs4proc.c and nfs4state.c.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't use WANT bits yet--and sending them can probably trigger a
BUG() further down.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In response to some review comments, get rid of the somewhat obscure
for-loop with bitops, and improve a comment.
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use a separate stateid idr per client, and lookup a stateid by first
finding the client, then looking up the stateid relative to that client.
Also some minor refactoring.
This allows us to improve error returns: we can return expired when the
clientid is not found and bad_stateid when the clientid is found but not
the stateid, as opposed to returning expired for both cases.
I hope this will also help to replace the state lock mostly by a
per-client lock, but that hasn't been done yet.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Test_stateid is 4.1-only and only allowed after a sequence operation, so
this check is unnecessary.
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
