This patch adds mt8195 adda dai driver.
audio_h clock is used by ADSP bus and ADDA module.
When ADDA requires audio_h clock, it is switched to APLL1, otherwise
it is switched to Xtal_26m so that APLL1 can be turned off when audio
feature is not used.
ADSP bus only requires that the clock is on, so dynamic reparenting
is used for the purpose of lowering power consumption.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 tdm/i2s dai driver.
MCLK clock tree is as follows.
PLL -> MUX -> DIVIDER -> MCLK
For PLL source of MCLK, driver only supports APLL1 and APLL2 now.
APLL3 and APLL4 are used to track external clock source, so they are
only used when slave input is connected.
For example,
case 1: (HDMI RX connected)
DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec
case 2: (HDMI RX disconnected)
HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... ->
etdm out2 (clk from apll3) -> codec
We keep all modules in the pipeline working on the same clock domain.
MCLK is expected to output the clock generated from the same clock
source as the pipeline, so dynamic reparenting is required for MCLK
configuration.
As a result, clk_set_parent() is used to select PLL source,
and clk_set_rate() is used to configure divider to get MCLK output rate.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 audio cg control.
Audio clock gates are registered to CCF for reference count and
clock parent management.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing skylake-driver supports very basic scenarios with limited range
of modules and their control. Attached changes first fix code as several
advanced configurations are 'mentioned' throughout the files but are not
actually functional. Follow up are changes adding missing support for
said configurations.
Cezary Rojewski (5):
ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373
ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
ASoC: Intel: Skylake: Fix module resource and format selection
ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER
ASoC: Intel: Skylake: Select first entry for singular pipe config
arrays
Gustaw Lewandowski (2):
ASoC: Intel: Skylake: Fix passing loadable flag for module
ASoC: Intel: Skylake: Simplify m_state for loadable modules
Kareem Shaik (1):
ASoC: Intel: Skylake: Support multiple format configs
Pawel Harlozinski (1):
ASoC: Intel: Skylake: Properly configure modules with generic
extension
Piotr Maziarz (1):
ASoC: Intel: Skylake: Select proper format for NHLT blob
Szymon Mielczarek (1):
ASoC: Intel: Skylake: Support modules with generic extension
include/uapi/sound/snd_sst_tokens.h | 6 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +------
sound/soc/intel/skylake/skl-messages.c | 155 ++++++++++++-------
sound/soc/intel/skylake/skl-pcm.c | 25 ++-
sound/soc/intel/skylake/skl-topology.c | 155 +++++++++++--------
sound/soc/intel/skylake/skl-topology.h | 26 +++-
6 files changed, 231 insertions(+), 191 deletions(-)
--
2.25.1
bclk_ms is possible unused by using the given config (see [1]).
sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is
never read [clang-analyzer-deadcode.DeadStores]
bclk_ms = frame_size > 32;
^ ~~~~~~~~~~~~~~~
In addition, bclk_ms is meaningless and confusing after applying commit
a5db2ca513 ("ASoC: rt1015: remove unneeded variables in rt1015_priv").
The "> 32" in the expression looks like a typo but it was not.
Let's remove the confusing variable bclk_ms.
[1]: https://lkml.org/lkml/2021/8/23/305
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only
used inside bytcr_rt5640.c, mark them as static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use common enum instead of oneOf and correct indentation warning:
realtek,rt1015p.yaml:18:7: [warning] wrong indentation: expected 4 but found 6 (indentation)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210819101020.26368-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When pipe does not expose multiple configuration options, always select
the first entry without searching for matching one.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of struct skl_base_cfg_ext and its format setter to configure
modules which are described with said structure.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DSP modules require, besides the module base configuration, a
generic extension containing audio format for all module's pins that are
in use.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A module can have two kinds of set params, as per topology requirements.
For example, one pre-init and one post-init. But currently, there is
support for just one type, as the format_config.
This patch extends the format_configs to 4, so as to be able to support
pre-init, post-init and post-bind type of set params, for the same
module, simultaneously.
Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
States SKL_MODULE_LOADED and SKL_MODULE_UNLOADED are redundant with
'loadable' flag in struct skl_module. Additionally
skl_tplg_mixer_dapm_post_pmd_event() sets m_state always to
SKL_MODULE_UNINIT so next unload function isn't called for such modules.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
skl_get_module_info() tries to set mconfig->module->loadable before
mconfig->module has been assigned thus flag was always set to false
and driver did not try to load module binaries.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KeyPhrasebuffer, Mixin and Mixout modules configuration is described by
firmware's basic module configuration structure. There are no extended
parameters required. Update functions taking part in building
INIT_INSTANCE IPC payload to reflect that.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Module configuration may differ between its instances depending on
resources required and input and output audio format. Available
parameters to select from are stored in module resource and interface
(format) lists. These come from topology, together with description of
each of pipe's modules.
Ignoring index value provided by topology and relying always on 0th
entry leads to unexpected module behavior due to under/overbudged
resources assigned or impropper format selection. Fix by taking entry at
index specified by topology.
Fixes: f6fa56e225 ("ASoC: Intel: Skylake: Parse and update module config structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use actual pipeline format, not PCM format for blob selection. Otherwise
selected blobs are not correct in pipelines with format conversion
e.g.: SRC module.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Lewandowski, Gustaw <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Advancing pointer initially fixed issue for some users but caused
regression for others. Leave data as it to make it easier for end users
to adjust their topology files if needed.
Fixes: a8cd7066f0 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Contrary to what is said in board's file, topology targeting
kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert
changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring
old behavior back, aligning with topology expectations.
Fixes: 716d53cc78 ("ASoC: Intel: Boards: Add Maxim98373 support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Changes in v2:
- Rebase on asoc/for-next
- New patch: "ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2"
DAPM pin for the mic on the 2nd jack"
- Addressed Pierre-Louis' comments about calling
acpi_dev_add_driver_gpios() twice
Original cover-letter:
The HP Elitepad 1000 G2 tablet has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.
The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.
Differentiating between between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.
Regards,
Hans
Hans de Goede (6):
ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c
file
ASoC: rt5640: Delay requesting IRQ until the machine-drv calls
set_jack
ASoC: rt5640: Add optional hp_det_gpio parameter to
rt5640_detect_headset()
ASoC: rt5640: Add rt5640_set_ovcd_params() helper
ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for
the mic on the 2nd jack
ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2
jack-detect
sound/soc/codecs/rt5640.c | 136 ++++++++++++----------
sound/soc/codecs/rt5640.h | 6 +
sound/soc/intel/boards/bytcr_rt5640.c | 158 +++++++++++++++++++++++++-
3 files changed, 234 insertions(+), 66 deletions(-)
--
2.31.1
This driver is assuming that all adg->clk[i] is not NULL.
Because of this prerequisites, for_each_rsnd_clk() is possible to work
for all clk without checking NULL. In other words, all adg->clk[i]
should not NULL.
Some SoC might doesn't have clk_a/b/c/i. devm_clk_get() returns error in
such case. This driver calls rsnd_adg_null_clk_get() and use null_clk
instead of NULL in such cases.
But devm_clk_get() might returns NULL even though such clocks exist, but
it doesn't mean error (user deliberately chose to disable the feature).
NULL clk itself is not error from clk point of view, but is error from
this driver point of view because it is not assuming such case.
But current code is using IS_ERR() which doesn't care NULL.
This driver uses IS_ERR_OR_NULL() instead of IS_ERR() for clk check.
And it uses ERR_CAST() to clarify null_clk error.
One concern here is that it unconditionally uses null_clk if clk_a/b/c/i
was error. It is correct if it doesn't exist, but is not correct if it
returns error even though it exist.
It needs to check "clock-names" from DT before calling devm_clk_get() to
handling such case. But let's assume it is overkill so far.
Link: https://lore.kernel.org/r/YMCmhfQUimHCSH/n@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v940wyf9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate arrays on the stack but instead them static const.
Makes the object code smaller by 48 bytes.
Before:
text data bss dec hex filename
20938 916 104 21958 55c6 ./sound/soc/sh/rcar/core.o
After:
text data bss dec hex filename
20890 916 104 21910 5596 ./sound/soc/sh/rcar/core.o
gcc version 11.1.0)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tujkwydx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP Elitepad 1000 G2 tablet has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.
The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.
Differentiating between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.
Add support for this unique setup, this support gets enabled on this
tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to do jack-detection reporting for the
mic contact on the 2nd jack found on some devices, the
DAPM topology needs to have a separate DAPM pin/input for that
microphone, instead of re-using the "Internal Mic" pin which is
normally used together with the IN1P input of the codec.
Using the "Internal Mic" dapm-pin-switch for this in a snd_soc_jack_pin to
report hotplug events causes the "Internal Mic" pin to get deactivated
when unplugging a headset from the 2nd jack, thus turning off the actual
Internal Mic (typically a pair of digital mics on devices with 2 jacks).
Fixes: 79c1123bac ("ASoC: Intel: bytcr_rt5640: Add support for a second headset mic input")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection to differentiate
between headphones vs a headset.
Move the ovcd init code from rt5640_enable_jack_detect() into a new
rt5640_set_ovcd_params() helper and export this helper as well
as a couple of related ovcd functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection headphones vs
headset detection done by rt5640_detect_headset().
In this case the jack-inserted check done by rt5640_detect_headset()
needs to be done through a GPIO rather then by using the codec's
builtin jack-detect. Add an optional hp_det_gpio parameter and export
rt5640_detect_headset() for use on machines where jack-detect is
handled outside of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delay requesting the IRQ until the machine-drv calls set_jack.
The main reason for this is that the codec's IRQ is unused on some boards,
in which case we really should not call request_irq at all.
On some boards there is an IRQ listed at index 0 for the codec, but
this is not connected to the codec, but rather is directly connected
to the jack's jack-detect pin. These special setups will be handled
by the machine-driver, but the machine driver can only request the IRQ
if it is not first requested by the codec driver. Moving the request_irq
to the set_jack callback (which will not get called in this case) avoids
the codec-driver clobbering the IRQ.
Moving the request_irq also removes the need to disable the IRQ immediately
after requesting it, avoiding a small race (this could also have been fixed
by using the new IRQF_NO_AUTOEN flag when requesting the IRQ).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move rt5640_disable_jack_detect() to above rt5640_enable_jack_detect().
This is a preparation patch for reworking how the IRQ gets requested.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays mul and div on the stack but instead make them
static const. Makes the object code smaller by 4 bytes.
Before:
text data bss dec hex filename
16226 4984 64 21274 531a ./sound/soc/uniphier/aio-cpu.o
After:
text data bss dec hex filename
16062 5144 64 21270 5316 ./sound/soc/uniphier/aio-cpu.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210818151746.38520-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_request_chan() returns error pointer in case of failures, but
the rz_ssi_dma_request() checked for NULL pointer instead.
This patch fixes the issue by checking for ERR_PTR() instead of
NULL and sets the DMA pointers to NULL in error case so that ssi
can fallback to PIO mode.
Fixes: 26ac471c53 ("ASoC: sh: rz-ssi: Add SSI DMAC support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210818101450.15948-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_clk_get() may return -EPROBE_DEFER, then clocks
will be assigned to NULL wrongly. As the clocks are
optional so we can use devm_clk_get_optional() instead of
devm_clk_get().
Fixes: b73d9e6225 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1629266614-6942-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use "cfg-lineout:2" in the components string on boards with a lineout
instead of "cfg-lineout:1", this better mirrors the speaker part of
the components string where we use "cfg-spk:1" for devices with a single
speaker and "cfg-spk:2" for stereo speakers.
The lineout is stereo by default, so using ":2" makes more sense, this
way we keep ":1" reserved in case we ever encounter a device with
a mono lineout.
We can make this change without breaking userspace because no kernel
has shipped with "cfg-lineout:1" in the component-string yet; and there
also are no userspace bits (UCM profiles) checking for this yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210816114722.107363-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix wrong operator used issue reported by Coverity by replacing |
operator with & operator.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210816182336.29959-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix following sparse warning:
sound/soc/sh/rz-ssi.c:156:15: sparse: warning: dereference of
noderef expression
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210816132049.28128-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-ac97.c:41:15: style: struct member 'snd_ac97_gpio_priv::gpios_set' is never used. [unusedStructMember]
unsigned int gpios_set;
^
sound/soc/soc-ac97.c:42:28: style: struct member 'snd_ac97_gpio_priv::component' is never used. [unusedStructMember]
struct snd_soc_component *component;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1euyolk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-component.c:1183:9: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfzayolo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-jack.c:21:6: style: struct member 'jack_gpio_tbl::count' is never used. [unusedStructMember]
int count;
^
sound/soc/soc-jack.c:23:28: style: struct member 'jack_gpio_tbl::gpios' is never used. [unusedStructMember]
struct snd_soc_jack_gpio *gpios;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tujqyols.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-jack.c:45:6: style: The scope of the variable 'enable' can be reduced. [variableScope]
int enable;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v946yolx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-dai.c:553:13: style: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int i, ret = 0;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnomyom1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
