Device has up to WSA884X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA884X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA884X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: aa21a7d4f6 ("ASoC: codecs: wsa884x: Add WSA884x family of speakers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-6-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WSA883X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA883X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA883X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-5-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WSA881X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA881X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA881X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-4-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WCD939X_MAX_TX_SWR_PORTS (or WCD939X_MAX_RX_SWR_PORTS
for sink) number of ports and the array assigned to prop.src_dpn_prop
and prop.sink_dpn_prop has 0..WCD939X_MAX_TX_SWR_PORTS-1 elements. On
the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WCD939X_MAX_TX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-3-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WCD938X_MAX_SWR_PORTS number of ports and the array
assigned to prop.src_dpn_prop and prop.sink_dpn_prop has
0..WCD938X_MAX_SWR_PORTS-1 elements. On the other hand, GENMASK(high,
low) creates an inclusive mask between <high, low>, so we need the mask
from 0 up to WCD938X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: 16572522ae ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-2-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Device has up to WCD937X_MAX_TX_SWR_PORTS (or WCD937X_MAX_SWR_PORTS
for sink) number of ports and the array assigned to prop.src_dpn_prop
and prop.sink_dpn_prop has 0..WCD937X_MAX_TX_SWR_PORTS-1 elements. On
the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WCD937X_MAX_TX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Fixes: c99a515ff1 ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240726-asoc-wcd-wsa-swr-ports-genmask-v1-1-d4d7a8b56f05@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX9x platforms, the REG_MICFIL_FSYNC_CTRL, REG_MICFIL_VERID,
REG_MICFIL_PARAM are added, but they are not existed on i.MX8x
platforms.
Use the existed micfil->soc->use_verid to distinguish the access
permission for these platforms.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1721897694-6088-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the i.MX9x platforms, the mask of FIFO watermark
is 0x1F, on i.MX8x platforms, the mask of FIFO watermark
is 0X7. So use the mask 0x1F for all platforms to make them
compatible.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1721897694-6088-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST fixes combo jack detection and
limits the internal microphone boost that causes clipping on this model.
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240728123601.144017-1-mavchatz@protonmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property
-----BEGIN PGP SIGNATURE-----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=Nn/d
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Two commits are included to fix some regressions. These commits should also
be applied to the v6.10 kernel as well.
The recent integration of compiler collections introduced the technology
to check flexible array length at runtime by providing proper annotations.
In v6.10 kernel, a patch was merged into firewire subsystem to utilize it,
however the annotation was inadequate. There is also the related change for
the flexible array in sound subsystem, but it causes a regression where
the data in the payload of isochronous packet is incorrect for some
devices. These bugs are now fixed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZqRPbgAKCRCsLtaWM8Lw
E4IDAQCr4s3/W1fwkUcxvaFKn4ngELXtZ8D2BtI0I3x+axOvggEA4NhtbSwusyKK
r3Zsyf8r9WrzIOMFASqqV7LlaiWTogI=
=eq44
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The recent integration of compiler collections introduced the
technology to check flexible array length at runtime by providing
proper annotations. In v6.10 kernel, a patch was merged into firewire
subsystem to utilize it, however the annotation was inadequate.
There is also the related change for the flexible array in sound
subsystem, but it causes a regression where the data in the payload of
isochronous packet is incorrect for some devices. These bugs are now
fixed"
* tag 'firewire-fixes-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire-lib: fix wrong value as length of header for CIP_NO_HEADER case
Revert "firewire: Annotate struct fw_iso_packet with __counted_by()"
In a commit 1d717123bb ("ALSA: firewire-lib: Avoid
-Wflex-array-member-not-at-end warning"), DEFINE_FLEX() macro was used to
handle variable length of array for header field in struct fw_iso_packet
structure. The usage of macro has a side effect that the designated
initializer assigns the count of array to the given field. Therefore
CIP_HEADER_QUADLETS (=2) is assigned to struct fw_iso_packet.header,
while the original designated initializer assigns zero to all fields.
With CIP_NO_HEADER flag, the change causes invalid length of header in
isochronous packet for 1394 OHCI IT context. This bug affects all of
devices supported by ALSA fireface driver; RME Fireface 400, 800, UCX, UFX,
and 802.
This commit fixes the bug by replacing it with the alternative version of
macro which corresponds no initializer.
Cc: stable@vger.kernel.org
Fixes: 1d717123bb ("ALSA: firewire-lib: Avoid -Wflex-array-member-not-at-end warning")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/r/rrufondjeynlkx2lniot26ablsltnynfaq2gnqvbiso7ds32il@qk4r6xps7jh2/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240725155640.128442-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
A collection of the fixes gathered since the previous PR.
We see a bit large LOCs at a HD-audio quirk, but that's only bulk
COEF data, hence it's safe to take. In addition to that, there
were two minor fixes for MIDI 2.0 handling for ALSA core, and the
rest are all rather random small and device-specific fixes.
-----BEGIN PGP SIGNATURE-----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=RcQQ
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes gathered since the previous pull.
We see a bit large LOCs at a HD-audio quirk, but that's only bulk COEF
data, hence it's safe to take. In addition to that, there were two
minor fixes for MIDI 2.0 handling for ALSA core, and the rest are all
rather random small and device-specific fixes"
* tag 'sound-fix-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: fsl-asoc-card: Dynamically allocate memory for snd_soc_dai_link_components
ASoC: amd: yc: Support mic on Lenovo Thinkpad E16 Gen 2
ALSA: hda/realtek: Implement sound init sequence for Samsung Galaxy Book3 Pro 360
ALSA: hda/realtek: cs35l41: Fixup remaining asus strix models
ASoC: SOF: ipc4-topology: Preserve the DMA Link ID for ChainDMA on unprepare
ASoC: SOF: ipc4-topology: Only handle dai_config with HW_PARAMS for ChainDMA
ALSA: ump: Force 1 Group for MIDI1 FBs
ALSA: ump: Don't update FB name for static blocks
ALSA: usb-audio: Add a quirk for Sonix HD USB Camera
ASoC: TAS2781: Fix tasdev_load_calibrated_data()
ASoC: tegra: select CONFIG_SND_SIMPLE_CARD_UTILS
ASoC: Intel: use soc_intel_is_byt_cr() only when IOSF_MBI is reachable
ALSA: usb-audio: Move HD Webcam quirk to the right place
ALSA: hda: tas2781: mark const variables as __maybe_unused
ALSA: usb-audio: Fix microphone sound on HD webcam.
ASoC: sof: amd: fix for firmware reload failure in Vangogh platform
ASoC: Intel: Fix RT5650 SSP lookup
ASOC: SOF: Intel: hda-loader: only wait for HDaudio IOC for IPC4 devices
ASoC: SOF: imx8m: Fix DSP control regmap retrieval
The current conversion from the legacy SysEx event to UMP SysEx packet
in the sequencer core has a couple of issues:
* The first packet trims the SysEx start byte (0xf0), hence it
contains only 5 bytes instead of 6. This isn't wrong, per
specification, but it's strange not to fill 6 bytes.
* When the SysEx end marker (0xf7) is placed at the first byte of the
next packet, it'll end up with an empty data just with the END
status. It can be rather folded into the previous packet with the
END status.
This patch tries to address those issues. The first packet may have 6
bytes even with the SysEx start, and an empty packet with the SysEx
end marker is omitted.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240726143455.3254-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices indicate click noises at suspend or shutdown when the
speakers are unmuted. This patch adds a helper,
snd_hda_gen_shutup_speakers(), to work around it. The new function is
supposed to be called at suspend or shutdown by the codec driver, and
it mutes the speakers.
The mute status isn't cached, hence the original mute state will be
restored at resume again.
Link: https://patch.msgid.link/20240726142625.2460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous fix (7aeb259086) only handles the unsol_event reporting
during interrupts and does not include the polling mode used to set
jackroll_ms, so now we are replacing it with
snd_hda_jack_detect_enable_callback.
Fixes: 7aeb259086 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Co-developed-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20240726100726.50824-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
A selection of routine fixes and quirks that came in since the merge
window. The fsl-asoc-card change is a fix for systems with multiple
cards where updating templates in place leaks data from one card to
another.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaidTQACgkQJNaLcl1U
h9C1ygf+IVXH3RKe68UKPzUrOvsBj+231vxRXiisq6p7DHx/IgVpK/hShbh7AKQc
5Fm4RBqOYo7FCffmDYKc+DcBFj4X1GpixzpW5n9J6bTWcHyC9r0/k9HFB8D00aF9
fVCJGkIKDFzRlag+EGnF38qNmPBLlJgLfa9LA7vJYv6GCrNZ4dYJtG1Fdun5fOSF
r0pzmw03/I9HwpUzBuCa1Dz8Fdvs653scDRTs4bed6y9OJ3LUMfwrt1+jXuoge0k
3hi3MZU8XyBLFfVVrUdv7X0FwdsOBYmihrECNZWu90xwa8F5XBxwlH5OQQn2uOGf
Z/+jV0i4XtYkOhOxbnNtCHwd7ZBXGQ==
=kr40
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A selection of routine fixes and quirks that came in since the merge
window. The fsl-asoc-card change is a fix for systems with multiple
cards where updating templates in place leaks data from one card to
another.
The static snd_soc_dai_link_components cause conflict for multiple
instances of this generic driver. For example, when there is
wm8962 and SPDIF case enabled together, the contaminated
snd_soc_dai_link_components will cause another device probe fail.
Fixes: 6d174cc4f2 ("ASoC: fsl-asoc-card: merge spdif support from imx-spdif.c")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1721877773-5229-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Samsung Galaxy Book3 Pro 360 sends a large amount of data to the codec
through hda processing coefficients. This data was captured using a
modified version of QEMU, but the actual content of the data remains
opaque to me. Elliding any part of the data seems to cause sound to
not work.
Signed-off-by: Nick Weihs <nick.weihs@gmail.com>
Link: https://patch.msgid.link/20240725054722.42597-1-nick.weihs@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adjust quirks for 0x3a20, 0x3a30, 0x3a50 to match the 0x3a60. This
set has now been confirmed to work with this patch.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Fixes: 811dd426a9 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240723011224.115579-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DMA Link ID is set to the IPC message's primary during dai_config,
which is only during hw_params.
During xrun handling the hw_params is not called and the DMA Link ID
information will be lost.
All other fields in the message expected to be 0 for re-configuration, only
the DMA Link ID needs to be preserved and the in case of repeated
dai_config, it is correctly updated (masked and then set).
Cc: stable@vger.kernel.org
Fixes: ca5ce0caa6 ("ASoC: SOF: ipc4/intel: Add support for chained DMA")
Link: https://github.com/thesofproject/linux/issues/5116
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240724081932.24542-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA Link ID is only valid in snd_sof_dai_config_data when the
dai_config is called with HW_PARAMS.
The commit that this patch fixes is actually moved a code section without
changing it, the same bug exists in the original code, needing different
patch to kernel prior to 6.9 kernels.
Cc: stable@vger.kernel.org
Fixes: 3858464de5 ("ASoC: SOF: ipc4-topology: change chain_dma handling in dai_config")
Link: https://github.com/thesofproject/linux/issues/5116
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240724081932.24542-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a Function Block declares it being a legacy MIDI1 device, it has
to be only with a single UMP Group. Correct the attribute when a
device declares it wrongly.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240722140610.10845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a device tries to update the FB name string even if its Endpoint
is declared as static, we should skip it, just already done for the FB
info update reply.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240722135929.8612-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sonix HD USB Camera does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x84".
This patch adds the USB ID to quirks.c and avoids those error messages.
(snip)
[1.789698] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[1.984121] usb 3-3: New USB device found, idVendor=0c45, idProduct=6340, bcdDevice= 0.00
[1.984124] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[1.984127] usb 3-3: Product: USB 2.0 Camera
[1.984128] usb 3-3: Manufacturer: Sonix Technology Co., Ltd.
[5.440957] usb 3-3: 3:1: cannot get freq at ep 0x84
[12.130679] usb 3-3: 3:1: cannot get freq at ep 0x84
[12.175065] usb 3-3: 3:1: cannot get freq at ep 0x84
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240722084822.31620-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function has a reversed if statement so it's either a no-op or it
leads to a NULL dereference.
Fixes: b195acf526 ("ASoC: tas2781: Fix wrong loading calibrated data sequence")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/18a29b68-cc85-4139-b7c7-2514e8409a42@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
This I2S client driver now uses functions exported from a helper module
but fails to link when the helper is disabled:
ERROR: modpost: "simple_util_parse_convert" [sound/soc/tegra/snd-soc-tegra210-i2s.ko] undefined!
ERROR: modpost: "simple_util_get_sample_fmt" [sound/soc/tegra/snd-soc-tegra210-i2s.ko] undefined!
Add a Kconfig select line to ensure it's always turned on here.
Fixes: 2502f8dd8c ("ASoC: tegra: I2S client convert formats handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240719074831.3253995-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
the Intel kbuild bot reports a link failure when IOSF_MBI is built-in
but the Merrifield driver is configured as a module. The
soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI
is not selected for that platform.
ld.lld: error: undefined symbol: iosf_mbi_read
>>> referenced by atom.c
>>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a
This patch forces the use of the fallback static inline when IOSF_MBI is not reachable.
Fixes: 536cfd2f37 ("ASoC: Intel: use common helpers to detect CPUs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240722083002.10800-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk_flags_table[] is sorted in the USB ID order, while the last
fix was put at a wrong position. Adjust the entry at the right
position.
Fixes: 74dba24088 ("ALSA: usb-audio: Fix microphone sound on HD webcam.")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240722080605.23481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----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=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
I own an external usb Webcam, HD webcam, which had low mic volume and
inconsistent sound quality. Video works as expected.
(snip)
[ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd
[ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05
[ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam
[ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co
[ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513
[ 96.092610][ 2] [ T3680] usb 5-2.2: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[ 96.102436][ 2] [ T3680] usb 5-2.2: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
Set up quirk cval->res to 16 for 256 levels,
Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate.
Confirmed that happened anyway later due to the backoff mechanism,
After 3 failures.
All audio stream on device interfaces share the same values,
apart from wMaxPacketSize and tSamFreq :
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 1 Audio
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 0x0001 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0064 1x 100 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioStreaming Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0x0000
(snip)
Testing patch provides consistent good sound recording quality and volume range.
(snip)
[ 95.473820][ 1] [ T73] usb 5-2.2: new high-speed USB device number 7 using xhci_hcd
[ 95.773974][ 1] [ T73] usb 5-2.2: New USB device found, idVendor=1bcf, idProduct=2281, bcdDevice= 0.05
[ 95.783445][ 1] [ T73] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 95.791872][ 1] [ T73] usb 5-2.2: Product: HD webcam
[ 95.797001][ 1] [ T73] usb 5-2.2: Manufacturer: Sunplus IT Co
[ 95.802996][ 1] [ T73] usb 5-2.2: SerialNumber: 20200513
[ 96.110630][ 3] [ T3680] usbcore: registered new interface driver snd-usb-audio
[ 96.114329][ 7] [ T3677] usb 5-2.2: Found UVC 1.00 device HD webcam (1bcf:2281)
[ 96.167555][ 7] [ T3677] usbcore: registered new interface driver uvcvideo
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240719020906.8078-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID
144d:c1a4 requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting ACP ACLK as clock source when ACP enters D0 state causing
firmware load failure, as per design clock source should be internal
clock.
Remove acp_clkmux_sel field so that ACP will use internal clock
source when ACP enters into D0 state.
Fixes: d0dab6b76a ("ASoC: SOF: amd: Add sof support for vangogh platform")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240718062004.581685-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Add support for ROHM BD96801 Power Management IC
- Add support for Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Add support for Marvell 88PM886 Power Management IC
- New Device Support
- Add support for Keyboard Backlight to ChromeOS Embedded Controller
- Add support for LEDs to ChromeOS Embedded Controller
- Add support for Charge Control to ChromeOS Embedded Controller
- Add support for the HW Monitoring Service to ChromeOS Embedded Controller
- Add support for AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
- New Functionality
- Allow Syscon consumers to supply their own Regmaps on registration
- Fix-ups
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
- Bug Fixes
- Ensure potentially asserted recent lines are deasserted during initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings
-----BEGIN PGP SIGNATURE-----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=DSjk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause()
is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise
the DMA channel can't be resumed successfully.
Fixes: e8343410dd ("ALSA: dmaengine: Synchronize dma channel after drop()")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/1721198693-27636-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for
sof_card_private initialization") migrated the pin assignment in the
context struct up to soc-acpi-intel-ssp-common.c. This uses a lookup
table to see if a device has a amp/codec before assigning the pin. The
issue here arises when combination parts that serve both (with 2 ports)
are used.
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.3/adl_rt5682_def/SSP0-Codec'
CPU: 1 PID: 2079 Comm: udevd Tainted: G U 6.6.36-03391-g744739e00023 #1 3be1a2880a0970f65545a957db7d08ef4b3e2c0d
Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.552.0 05/07/2024
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
sysfs_warn_dup+0x5b/0x70
sysfs_create_dir_ns+0xb0/0x100
kobject_add_internal+0x133/0x3c0
kobject_add+0x66/0xb0
? device_add+0x65/0x780
device_add+0x164/0x780
snd_soc_add_pcm_runtimes+0x2fa/0x800
snd_soc_bind_card+0x35e/0xc20
devm_snd_soc_register_card+0x48/0x90
platform_probe+0x7b/0xb0
really_probe+0xf7/0x2a0
...
kobject: kobject_add_internal failed for SSP0-Codec with -EEXIST, don't try to register things with the same name in the same directory.
The issue is that the ALC5650 was only defined in the codec table and
not the amp table which left the pin unassigned but the dai link was
still created by the machine driver.
Also patch the suffix filename code for the topology to prevent double
suffix names as a result of this change.
Fixes: 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240716084012.299257-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Multiple users report a regression bisected to commit d5263dbbd8
("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio
transfers"). The firmware version is the likely suspect, as these
users relied on SOF 2.0 while Intel only tested with the 2.2 release.
Rather than completely disable the wait_for_completion(), which can
help us gather timing information on the different stages of the boot
process, the simplest course of action is to just disable it for older
IPC versions which are no longer under active development.
Closes: https://github.com/thesofproject/linux/issues/5072
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218961
Fixes: d5263dbbd8 ("ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfers")
Tested-by: Mike Krinkin <krinkin.m.u@gmail.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240716084530.300829-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Core:
- Make the takeover of a hrtimer based broadcast timer reliable during
CPU hot-unplug. The current implementation suffers from a race which
can lead to broadcast timer starvation in the worst case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
- PTP:
- Replace the architecture specific base clock to clocksource, e.g. ART
to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
- Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=8GjP
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
According to Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
fsl,dsp-ctrl is a phandle to syscon block so we need to use correct
function to retrieve it.
Currently there is no SOF DSP DTS merged into mainline so there is no
need to support the old way of retrieving the dsp control node.
Fixes: 9ba23717b2 ("ASoC: SOF: imx8m: Implement DSP start")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240715151653.114751-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible. A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.
Highlights:
- Syncing of features between simple-audio-card and the two
audio-graph cards so there is no reason to stick with an older
driver.
- Support for specifying the order of operations for components within
cards to allow quirking for unusual systems.
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVJSQACgkQJNaLcl1U
h9C8vwf/Q/wzwY5DSx8JM+qRkhjQdN11ILm5ZL8CD36K5frpv4YuqkHxvI3AO8Yb
+LGLVzmcf6XW4+SGBkXoSOUZOYK726Ld2+BoqTM0isPXHinGdrkcUhUcHKy7qS7g
3MImaVM+nGJGyO718cJ++XnEy7uNkbiA0ztIxy2Ui2Dzxq5LX++tT0IroRxf4AAf
zIFgZpaZz4lueTJ1d0FB7uIG4XHxg4nTn7cSllPhGr5mjiZZhOIwDGE1+9GQC44q
k8oMOACrh887qDSScCbW+pplLJunlei2EC28oVNxsUkNaxl+ItEj1s+X0XH1id6u
FZquRQPHZ9mJ0/QTlzo2l4g4EvOxKg==
=YXaR
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for for v6.11
There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible. A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.
Highlights:
- Syncing of features between simple-audio-card and the two
audio-graph cards so there is no reason to stick with an older
driver.
- Support for specifying the order of operations for components within
cards to allow quirking for unusual systems.
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
Instead of the explicit "1 << x", use BIT() macro for one bit values.
This will improve the readability and also avoids the possible bad
value for 31bit shift.
Link: https://patch.msgid.link/20240715123646.26679-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Positivo SU C1400 is equipped with ALC256, and it needs
ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240712180642.22564-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmaRQh0ACgkQqDIjiipP
6E+rfQgAqkAWZ9BjswxV8Fg+Hj+a1cSohKjDczqitQF5rJm25X5VvMwlXVa3XQGm
yemh4tKPpll02LOiYCTyqOWzNrkVS9VsoBd5rrYjRX5aSv7UD35EXklLj4P/INwX
O9CRGD6aK4Xbw66xxheYHSSh+2iRs2x2mq61+/VdcIBlAwpQo+vx7McRoJZZI+2t
NFIXw8RF5dDlmmAaqiB0WnPAtcOK3SDo9fu1LEAX1ZAzvbZriLo7XLnL7ibySWVe
BW1n7Ore6PN5Dvz7jMfTsOQsgAlVv6MPfp/s4EDqMfBLVqXNirzXrdhiee/ahnYP
vyzQyU5HPCMiIYS45mhJF0OyDd3wyw==
=wuYA
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
This patch set change will fix the unbalanced pm_runtime_enable in wcd937x-sdw soundwire slave.
And removed the string compare with widget name in MIC BIAS settings, instead
of string compare use the MIC BIAS id's as value.
Removed separate handling for vdd-buck regulator supply which is not
required. The vdd-buck regulator supply enabled using bulk enable.
Added the error handling in wcd937x_probe() and disable the regulators in error case.
A few fairly small fixes for ASoC, there's a relatively large set of
hardening changes for the cs_dsp firmware file parsing and a couple of
other small device specific fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaP7ksACgkQJNaLcl1U
h9Cpxgf/Sa+bDU17hG8pcS7WkPcBzZcwnbjEr/6rn2iilscZYn8YwhrXXadSMZp/
nAawm+ix+ErlfJZaR7kTbRQsthFVnYxyVjpLrWfW3iCdqD/jw00pzxjU7r8/uNKM
Sp2idj9Y0mH0ggfNQMzbnhXE09uY6gZqAf1KjwGmC59aUu6imVIEX3i0Swfetljs
1Ndc5Ub75ouRrbC20BVHMLm7hbOY8+k+gs9GUhEvanVgJ9f3pyCPNwJvWCVRFq1q
5aZYjqMBNuuaxZqtKhnUlddFTe7NLXffulFhrf8T/n2TvMvq3B+2jHoAXHoNTLV4
c9WZ6PmDsk6gKaG8/uZfOgMFzUz46w==
=gHJp
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A few fairly small fixes for ASoC, there's a relatively large set of
hardening changes for the cs_dsp firmware file parsing and a couple of
other small device specific fixes.
Rename the confusingly named struct member fw_ver to wmfw_ver. It
contains the wmfw format version of the loaded wmfw file.
This commit also contains an update to wm_adsp for the new name.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate memory, which is being freed at end of the scope, with
scoped/cleanup.h to reduce number of error paths and make code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701171917.596173-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate memory, which is being freed at end of the scope, with
scoped/cleanup.h to reduce number of error paths and make code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701171917.596173-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the tas2781_reset as tasdevice_reset in case of misunderstanding.
RESET register for both tas2563 and tas2781 is same and the use of reset
pin is also same.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240709043342.946-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HP 250 G7 has a mute LED that can be made to work using quirk
ALC269_FIXUP_HP_LINE1_MIC1_LED. Enable already existing quirk.
Signed-off-by: Nazar Bilinskyi <nbilinskyi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240709080546.18344-1-nbilinskyi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240708130254.9631-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>:
This is a series of patches aiming to make the machine driver
`fsl-asoc-card` compatible with S/PDIF controllers on imx boards. The
main goal is to allow the use of S/PDIF controllers with ASRC modules.
The `imx-spdif` machine driver already has specific support for S/PDIF
controllers but doesn't support using an ASRC with it. However, the
`fsl-asoc-card` machine driver has the necessary code to create a sound
card which can use an ASRC module.
It is then possible to extend the support for S/PDIF audio cards by
merging the `imx-spdif` driver into `fsl-asoc-card`.
The first three patches adapt the `fsl-asoc-card` driver to support
multiple codec use cases.
The driver can get 2 codec phandles from the device tree, and
codec-related variables are doubled.
`for_each_codecs` macros are also used when possible to ease adding
other multi-codec use cases in the future.
It makes possible to use the two S/PDIF dummy codec drivers
`spdif_receiver` and `spdif_transmitter` instead of `snd-soc-dummy`,
which was used in `imx-spdif`.
The fourth patch merges the S/PDIF support from `imx-spdif` to
`fsl-asoc-card`.
`fsl-asoc-card` offers the same functionalities as `imx-spdif` did, but
this merge also extends the S/PDIF support with the possibility of using
an ASRC.
Compatible "fsl,imx-audio-spdif" is kept, but `fsl-asoc-card` uses
different DT properties compared to `imx-spdif`:
* The "spdif-controller" property from `imx-spdif` is named "audio-cpu"
in `fsl-asoc-card`.
* `fsl-asoc-card` uses codecs explicitly declared in DT with
"audio-codec". With an S/PDIF, codec drivers `spdif_transmitter` and
`spdif_receiver` should be used. Driver `imx-spdif` used instead the
dummy codec and a pair of boolean properties, "spdif-in" and
"spdif-out".
Backward compatibility is therefore implemented in `fsl-asoc-card`.
However, it is recommended to use the new properties when needed.
Especially, declaring and using S/PDIF transmitter and/or receiver nodes
is better than using the dummy codec.
The last three patches update the device tree bindings of
`fsl-asoc-card` and update all in-tree device trees to use the
`fsl-asoc-card` properties.
Note that as the old properties are still supported:
* previous versions of in-tree device trees are still supported.
* out-of-tree device trees are still supported.
This series of patches was successfully built for arm64 and x86 on top
of the latest "for-next" branch of the ASoC git tree on the 26th of June
2024.
These modifications have also been tested on an i.MX8MN evaluation board
with a linux kernel RT v6.1.26-rt8.
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Allocate the memory with scoped/cleanup.h to reduce error handling
(simpler error paths) and make the code a bit smaller.
The imx-spdif machine driver creates audio card to directly use an
S/PDIF device. However, it doesn't support interacting with an ASRC.
fsl-asoc-card already has the support to create audio card which can
use the ASRC.
Merge the S/PDIF support from imx-spdif into driver fsl-asoc-card
to extend the support of S/PDIF audio card with the use of ASRC devices.
fsl-asoc-card uses slightly different DT properties than imx-spdif:
* the "spdif-controller" property from imx-spdif is named "audio-cpu" in
fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an SPDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
To keep backward compatibility, support for "spdif-controller",
"spdif-in" and "spdif-out" is also added to fsl-asoc-card.
However, it is recommended to use the new properties if possible.
It is better to declare transmitter and/or receiver in DT
than using the dummy codec.
DTs using compatible "fsl,imx-audio-spdif" are still compatible, and
fsl-asoc-card will behave the same as imx-spdif
for these DTs.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-5-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adapt the driver to work with configurations using two codecs or more.
Modify fsl_asoc_card_probe() to handle use cases where 2 codecs are
given in the device tree.
This will be needed to add support for the SPDIF.
Use cases using one codec will ignore any given codecs other than the
first.
Co-developed-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-4-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a second dai link component for codecs that will be used for use
cases with 2 codecs.
It is needed for future integration of the SPDIF support, which will
use spdif_receiver and spdif_transmitter drivers.
To prevent deferring in use cases using only one codec, also set
by default the number of codecs to 1 for the relevant dai links.
Co-developed-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-3-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for dai links using multiple codecs for multi-codec
use cases.
Co-developed-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Philip-Dylan Gleonec <philip-dylan.gleonec@savoirfairelinux.com>
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240627083104.123357-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use get_unaligned_be16 instead of be16_to_cpup and get_unaligned_be32
instead of be32_to_cpup for potentially broken alignment.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240707083011.98-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in
snd_soc_dai_link_event_pre_pmu() to reduce error handling (less error
paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-11-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in dapm_cnew_widget() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-10-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-9-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-8-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-7-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-6-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-5-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-4-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-3-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in audio_iio_aux_probe() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-2-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in audio_iio_aux_add_dapms()
to reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-1-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240705141012.5368-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding name-prefix for each audio controls is a redundant, because
name-prefix will be automatically added behind the control name when
creating a new control.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240705064846.1723-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH
E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H
wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR
31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp
zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM
quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg
O6fPUV8=
=pgUx
-----END PGP SIGNATURE-----
Merge v6.10-rc6 into drm-next
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Merge series from Herve Codina <herve.codina@bootlin.com>:
The qmc_audio driver supports only audio in interleaved mode.
Non-interleaved mode can be easily supported using several QMC channel
per DAI. In that case, data related to ch0 are sent to (received from)
the first QMC channel, data related to ch1 use the next QMC channel and
so on up to the last channel.
In terms of constraints and settings, the interleaved and
non-interleaved modes are slightly different.
In interleaved mode:
- The sample size should fit in the number of time-slots available for
the QMC channel.
- The number of audio channels should fit in the number of time-slots
(taking into account the sample size) available for the QMC channel.
In non-interleaved mode:
- The number of audio channels is the number of available QMC
channels.
- Each QMC channel should have the same number of time-slots.
- The sample size equals the number of time-slots of one QMC channel.
This series add support for the non-interleaved mode in the qmc_audio
driver and is composed of the following parts:
- Patches 1 and 2: Fix some issues in the qmc_audio
- Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode
- Patches 7 and 8: Extend the QMC driver API
- Patches 9 and 10: The support for non-interleaved mode itself
Compared to the previous iteration, this v2 series mainly improves
qmc_audio_access_is_interleaved().
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Improve a bit the Qualcomm LPASS RX macro driver and align similar parts
of code with LPASS WSA macro driver for consistency.
No external dependencies.
Set "Speaker Force Firmware Load" as the common kcontrol
for both tas27871 and tas2563 and move it into newly-created
tasdevice_snd_controls, and keep the digital gain and analog
gain in tas2781_snd_controls.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240704094939.1824-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
