nft_chain_validate already performs loop detection because a cycle will
result in a call stack overflow (ctx->level >= NFT_JUMP_STACK_SIZE).
It also follows maps via ->validate callback in nft_lookup, so there
appears no reason to iterate the maps again.
nf_tables_check_loops() and all its helper functions can be removed.
This improves ruleset load time significantly, from 23s down to 12s.
This also fixes a crash bug. Old loop detection code can result in
unbounded recursion:
BUG: TASK stack guard page was hit at ....
Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 4 PID: 1539 Comm: nft Not tainted 6.10.0-rc5+ #1
[..]
with a suitable ruleset during validation of register stores.
I can't see any actual reason to attempt to check for this from
nft_validate_register_store(), at this point the transaction is still in
progress, so we don't have a full picture of the rule graph.
For nf-next it might make sense to either remove it or make this depend
on table->validate_state in case we could catch an error earlier
(for improved error reporting to userspace).
Fixes: 20a69341f2 ("netfilter: nf_tables: add netlink set API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Happens when rules get flushed/deleted while packet is out, so remove
this WARN_ON.
This WARN exists in one form or another since v4.14, no need to backport
this to older releases, hence use a more recent fixes tag.
Fixes: 3f80196888 ("netfilter: move nf_reinject into nfnetlink_queue modules")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407081453.11ac0f63-lkp@intel.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not attach SQI value if link is down. "SQI values are only valid if
link-up condition is present" per OpenAlliance specification of
100Base-T1 Interoperability Test suite [1]. The same rule would apply
for other link types.
[1] https://opensig.org/automotive-ethernet-specifications/#
Fixes: 8066021915 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://patch.msgid.link/20240709061943.729381-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since 'ppp_async_encode()' assumes valid LCP packets (with code
from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that
LCP packet has an actual body beyond PPP_LCP header bytes, and
reject claimed-as-LCP but actually malformed data otherwise.
Reported-by: syzbot+ec0723ba9605678b14bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ec0723ba9605678b14bf
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The email address bounced. I couldn't find a newer one in recent git
history. Delete the entries and let them fallback to subsystem defaults.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add a selftest that tries to trigger a situation where two timer callbacks
are attempting to cancel each other's timer. By running them continuously,
we hit a condition where both run in parallel and cancel each other.
Without the fix in the previous patch, this would cause a lockup as
hrtimer_cancel on either side will wait for forward progress from the
callback.
Ensure that this situation leads to a EDEADLK error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711052709.2148616-1-memxor@gmail.com
The below commit introduced a warning message when phy state is not in
the states: PHY_HALTED, PHY_READY, and PHY_UP.
commit 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
mtk-star-emac doesn't need mdiobus suspend/resume. To fix the warning
message during resume, indicate the phy resume/suspend is managed by the
mac when probing.
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Jian Hui Lee <jianhui.lee@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240708065210.4178980-1-jianhui.lee@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 861e808602 ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
retracted its window to zero, tcp_retransmit_timer() can
retransmit a packet every two jiffies (2 ms for HZ=1000),
for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.
The fix is to make sure tcp_rtx_probe0_timed_out() takes
icsk->icsk_user_timeout into account.
Before blamed commit, the socket would not timeout after
icsk->icsk_user_timeout, but would use standard exponential
backoff for the retransmits.
Also worth noting that before commit e89688e3e9 ("net: tcp:
fix unexcepted socket die when snd_wnd is 0"), the issue
would last 2 minutes instead of 4.
Fixes: b701a99e43 ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jon Maxwell <jmaxwell37@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240710001402.2758273-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kumar Kartikeya Dwivedi says:
====================
Fixes for BPF timer lockup and UAF
The following patches contain fixes for timer lockups and a
use-after-free scenario.
This set proposes to fix the following lockup situation for BPF timers.
CPU 1 CPU 2
bpf_timer_cb bpf_timer_cb
timer_cb1 timer_cb2
bpf_timer_cancel(timer_cb2) bpf_timer_cancel(timer_cb1)
hrtimer_cancel hrtimer_cancel
In this case, both callbacks will continue waiting for each other to
finish synchronously, causing a lockup.
The proposed fix adds support for tracking in-flight cancellations
*begun by other timer callbacks* for a particular BPF timer. Whenever
preparing to call hrtimer_cancel, a callback will increment the target
timer's counter, then inspect its in-flight cancellations, and if
non-zero, return -EDEADLK to avoid situations where the target timer's
callback is waiting for its completion.
This does mean that in cases where a callback is fired and cancelled, it
will be unable to cancel any timers in that execution. This can be
alleviated by maintaining the list of waiting callbacks in bpf_hrtimer
and searching through it to avoid interdependencies, but this may
introduce additional delays in bpf_timer_cancel, in addition to
requiring extra state at runtime which may need to be allocated or
reused from bpf_hrtimer storage. Moreover, extra synchronization is
needed to delete these elements from the list of waiting callbacks once
hrtimer_cancel has finished.
The second patch is for a deadlock situation similar to above in
bpf_timer_cancel_and_free, but also a UAF scenario that can occur if
timer is armed before entering it, if hrtimer_running check causes the
hrtimer_cancel call to be skipped.
As seen above, synchronous hrtimer_cancel would lead to deadlock (if
same callback tries to free its timer, or two timers free each other),
therefore we queue work onto the global workqueue to ensure outstanding
timers are cancelled before bpf_hrtimer state is freed.
Further details are in the patches.
====================
Link: https://lore.kernel.org/r/20240709185440.1104957-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the same case as previous patch (two timer callbacks trying
to cancel each other) can be invoked through bpf_map_update_elem as
well, or more precisely, freeing map elements containing timers. Since
this relies on hrtimer_cancel as well, it is prone to the same deadlock
situation as the previous patch.
It would be sufficient to use hrtimer_try_to_cancel to fix this problem,
as the timer cannot be enqueued after async_cancel_and_free. Once
async_cancel_and_free has been done, the timer must be reinitialized
before it can be armed again. The callback running in parallel trying to
arm the timer will fail, and freeing bpf_hrtimer without waiting is
sufficient (given kfree_rcu), and bpf_timer_cb will return
HRTIMER_NORESTART, preventing the timer from being rearmed again.
However, there exists a UAF scenario where the callback arms the timer
before entering this function, such that if cancellation fails (due to
timer callback invoking this routine, or the target timer callback
running concurrently). In such a case, if the timer expiration is
significantly far in the future, the RCU grace period expiration
happening before it will free the bpf_hrtimer state and along with it
the struct hrtimer, that is enqueued.
Hence, it is clear cancellation needs to occur after
async_cancel_and_free, and yet it cannot be done inline due to deadlock
issues. We thus modify bpf_timer_cancel_and_free to defer work to the
global workqueue, adding a work_struct alongside rcu_head (both used at
_different_ points of time, so can share space).
Update existing code comments to reflect the new state of affairs.
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given a schedule:
timer1 cb timer2 cb
bpf_timer_cancel(timer2); bpf_timer_cancel(timer1);
Both bpf_timer_cancel calls would wait for the other callback to finish
executing, introducing a lockup.
Add an atomic_t count named 'cancelling' in bpf_hrtimer. This keeps
track of all in-flight cancellation requests for a given BPF timer.
Whenever cancelling a BPF timer, we must check if we have outstanding
cancellation requests, and if so, we must fail the operation with an
error (-EDEADLK) since cancellation is synchronous and waits for the
callback to finish executing. This implies that we can enter a deadlock
situation involving two or more timer callbacks executing in parallel
and attempting to cancel one another.
Note that we avoid incrementing the cancelling counter for the target
timer (the one being cancelled) if bpf_timer_cancel is not invoked from
a callback, to avoid spurious errors. The whole point of detecting
cur->cancelling and returning -EDEADLK is to not enter a busy wait loop
(which may or may not lead to a lockup). This does not apply in case the
caller is in a non-callback context, the other side can continue to
cancel as it sees fit without running into errors.
Background on prior attempts:
Earlier versions of this patch used a bool 'cancelling' bit and used the
following pattern under timer->lock to publish cancellation status.
lock(t->lock);
t->cancelling = true;
mb();
if (cur->cancelling)
return -EDEADLK;
unlock(t->lock);
hrtimer_cancel(t->timer);
t->cancelling = false;
The store outside the critical section could overwrite a parallel
requests t->cancelling assignment to true, to ensure the parallely
executing callback observes its cancellation status.
It would be necessary to clear this cancelling bit once hrtimer_cancel
is done, but lack of serialization introduced races. Another option was
explored where bpf_timer_start would clear the bit when (re)starting the
timer under timer->lock. This would ensure serialized access to the
cancelling bit, but may allow it to be cleared before in-flight
hrtimer_cancel has finished executing, such that lockups can occur
again.
Thus, we choose an atomic counter to keep track of all outstanding
cancellation requests and use it to prevent lockups in case callbacks
attempt to cancel each other while executing in parallel.
Reported-by: Dohyun Kim <dohyunkim@google.com>
Reported-by: Neel Natu <neelnatu@google.com>
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709185440.1104957-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The original function call passed size of smap->bucket before the number of
buckets which raises the error 'calloc-transposed-args' on compilation.
Vlastimil Babka added:
The order of parameters can be traced back all the way to 6ac99e8f23
("bpf: Introduce bpf sk local storage") accross several refactorings,
and that's why the commit is used as a Fixes: tag.
In v6.10-rc1, a different commit 2c321f3f70 ("mm: change inlined
allocation helpers to account at the call site") however exposed the
order of args in a way that gcc-14 has enough visibility to start
warning about it, because (in !CONFIG_MEMCG case) bpf_map_kvcalloc is
then a macro alias for kvcalloc instead of a static inline wrapper.
To sum up the warning happens when the following conditions are all met:
- gcc-14 is used (didn't see it with gcc-13)
- commit 2c321f3f70 is present
- CONFIG_MEMCG is not enabled in .config
- CONFIG_WERROR turns this from a compiler warning to error
Fixes: 6ac99e8f23 ("bpf: Introduce bpf sk local storage")
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20240710100521.15061-2-vbabka@suse.cz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
No identifiable theme here - all are singleton patches, 19 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZo7tTQAKCRDdBJ7gKXxA
jvhZAP977PnAwQH5khIS3xJxZrqx/+Tho7UPZzQPvHJPRpHorAD/TZfDazGtlPMD
uLPEVslh18rks/w+kddLrnlBnkpUMwY=
=vhts
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 15 of which are cc:stable.
No identifiable theme here - all are singleton patches, 19 are for MM"
* tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
filemap: replace pte_offset_map() with pte_offset_map_nolock()
arch/xtensa: always_inline get_current() and current_thread_info()
sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings
MAINTAINERS: mailmap: update Lorenzo Stoakes's email address
mm: fix crashes from deferred split racing folio migration
lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
mm: gup: stop abusing try_grab_folio
nilfs2: fix kernel bug on rename operation of broken directory
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
cachestat: do not flush stats in recency check
mm/shmem: disable PMD-sized page cache if needed
mm/filemap: skip to create PMD-sized page cache if needed
mm/readahead: limit page cache size in page_cache_ra_order()
mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
mm/damon/core: merge regions aggressively when max_nr_regions is unmet
Fix userfaultfd_api to return EINVAL as expected
mm: vmalloc: check if a hash-index is in cpu_possible_mask
mm: prevent derefencing NULL ptr in pfn_section_valid()
...
One core change that moves a disk start message to a location where it
will only be printed once instead of twice plus a couple of error
handling race fixes in the ufs driver.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZo7JRCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSMgAPoDnYkV
GTWdnFnoS6is3jDn/x1qtQf6Y+HjLcURWlmpcAEA0AQGyhlCMlv5xIjFiBSct/fn
vCMDLKo+FxTjpSwWp+8=
=I6+w
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that moves a disk start message to a location where it
will only be printed once instead of twice plus a couple of error
handling race fixes in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not repeat the starting disk message
scsi: ufs: core: Fix ufshcd_abort_one racing issue
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
We should allow RXDMA only if the reset was really successful, so clear
the flag after the reset call.
Fixes: 0e864b552b ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
- Recent stable backports are exposing a bug introduced in the v6.10
development cycle where a counter value is uninitialized. This leads
to regressions in userspace drivers like QEMU where where the kernel
might ask for an arbitrary buffer size or return out of memory itself
based on a bogus value. Zero initialize the counter. (Yi Liu)
-----BEGIN PGP SIGNATURE-----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=syRE
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.10' of https://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
- Recent stable backports are exposing a bug introduced in the v6.10
development cycle where a counter value is uninitialized. This leads
to regressions in userspace drivers like QEMU where where the kernel
might ask for an arbitrary buffer size or return out of memory itself
based on a bogus value. Zero initialize the counter. (Yi Liu)
* tag 'vfio-v6.10' of https://github.com/awilliam/linux-vfio:
vfio/pci: Init the count variable in collecting hot-reset devices
- Switch some asserts to WARN()
- Fix a few "transaction not locked" asserts in the data read retry
paths and backpointers gc
- Fix a race that would cause the journal to get stuck on a flush commit
- Add missing fsck checks for the fragmentation LRU
- The usual assorted ssorted syzbot fixes
-----BEGIN PGP SIGNATURE-----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=VGT8
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-07-10' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Switch some asserts to WARN()
- Fix a few "transaction not locked" asserts in the data read retry
paths and backpointers gc
- Fix a race that would cause the journal to get stuck on a flush
commit
- Add missing fsck checks for the fragmentation LRU
- The usual assorted ssorted syzbot fixes
* tag 'bcachefs-2024-07-10' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Add missing bch2_trans_begin()
bcachefs: Fix missing error check in journal_entry_btree_keys_validate()
bcachefs: Warn on attempting a move with no replicas
bcachefs: bch2_data_update_to_text()
bcachefs: Log mount failure error code
bcachefs: Fix undefined behaviour in eytzinger1_first()
bcachefs: Mark bch_inode_info as SLAB_ACCOUNT
bcachefs: Fix bch2_inode_insert() race path for tmpfiles
closures: fix closure_sync + closure debugging
bcachefs: Fix journal getting stuck on a flush commit
bcachefs: io clock: run timer fns under clock lock
bcachefs: Repair fragmentation_lru in alloc_write_key()
bcachefs: add check for missing fragmentation in check_alloc_to_lru_ref()
bcachefs: bch2_btree_write_buffer_maybe_flush()
bcachefs: Add missing printbuf_tabstops_reset() calls
bcachefs: Fix loop restart in bch2_btree_transactions_read()
bcachefs: Fix bch2_read_retry_nodecode()
bcachefs: Don't use the new_fs() bucket alloc path on an initialized fs
bcachefs: Fix shift greater than integer size
bcachefs: Change bch2_fs_journal_stop() BUG_ON() to warning
...
Here's a fix for a long-standing issue in the mos7840 driver that can trigger
a crash when resuming from system suspend.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZo6w6gAKCRALxc3C7H1l
CNPAAP0SiU/4HcMRJ/m6Q2xPiuq27Xo6yFg7kjjRiCQVObio6AEA8wjAdSiMoPhx
p9vfS+8cvZ7z5YtxkBYPKaZsjESq+QM=
=cW58
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.10-rc8' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.10-rc8
Here's a fix for a long-standing issue in the mos7840 driver that can trigger
a crash when resuming from system suspend.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.10-rc8' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
Highlights:
- Fix missing dmi_system_id array termination in toshiba_acpi introduced in 2022
The following is an automated git shortlog grouped by driver:
toshiba_acpi:
- Fix array out-of-bounds access
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmaOl6IUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xSXwgAuGunI5/MqhsyUNDwrC8ZH1MiMUpC
U81kNnhUn/S4Wu9nu3TunrP99hEAXY//2ImlN6QRiiSXSo95SmRRKSeipV6MeKY5
bD7HWhUoGA0DApI94nURq85fj56yBJr649R5dEx0TV0DFvFkoZxAUpnHe5m/xtva
RZbdl8fSpxLqV3fxeXV4b+P3UUDw2DRbI40vCSAJsQ6aJvWwKtENLdvweBJaGyjV
5ZNJSYd1YRUK7sVoN/cJI4vKmj/qXSU531Y8SeRSzGElMDCwQ9V7kxLq7Df4H68q
cE8czC7XlVW/t9Vlx0d29v3EzFXvflHjBcHMfpgTwJtPCz+z18rlUXXMtA==
=f+EK
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
"One-liner fix for a dmi_system_id array in the toshiba_acpi driver not
being terminated properly.
Something which somehow has escaped detection since being introduced
in 2022 until now"
* tag 'platform-drivers-x86-v6.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: toshiba_acpi: Fix array out-of-bounds access
Fix the sorting of _CST output data in the ACPI processor idle
driver (Kuan-Wei Chiu).
-----BEGIN PGP SIGNATURE-----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=/dN3
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the sorting of _CST output data in the ACPI processor idle driver
(Kuan-Wei Chiu)"
* tag 'acpi-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Fix invalid comparison with insertion sort for latency
Fix two issues related to boost frequencies handling, one in the cpufreq
core and one in the ACPI cpufreq driver (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=rCmw
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix two issues related to boost frequencies handling, one in the
cpufreq core and one in the ACPI cpufreq driver (Mario Limonciello)"
* tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Mark boost policy as enabled when setting boost
cpufreq: Allow drivers to advertise boost enabled
- Prevent the Power Allocator thermal governor from dereferencing a NULL
pointer if it is bound to a tripless thermal zone (Nícolas Prado).
- Prevent thermal zones enabled too early from staying effectively
dormant forever because their temperature cannot be determined
initially (Rafael Wysocki).
- Fix list sorting during thermal zone temperature updates to ensure
the proper ordering of trip crossing notifications (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=o+Gb
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a possible NULL pointer dereference in a thermal governor,
fix up the handling of thermal zones enabled before their temperature
can be determined and fix list sorting during thermal zone temperature
updates.
Specifics:
- Prevent the Power Allocator thermal governor from dereferencing a
NULL pointer if it is bound to a tripless thermal zone (Nícolas
Prado)
- Prevent thermal zones enabled too early from staying effectively
dormant forever because their temperature cannot be determined
initially (Rafael Wysocki)
- Fix list sorting during thermal zone temperature updates to ensure
the proper ordering of trip crossing notifications (Rafael
Wysocki)"
* tag 'thermal-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix list sorting in __thermal_zone_device_update()
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
thermal: gov_power_allocator: Return early in manage if trip_max is NULL
The count variable is used without initialization, it results in mistakes
in the device counting and crashes the userspace if the get hot reset info
path is triggered.
Fixes: f6944d4a0b ("vfio/pci: Collect hot-reset devices to local buffer")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219010
Reported-by: Žilvinas Žaltiena <zaltys@natrix.lt>
Cc: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240710004150.319105-1-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to use toshiba_dmi_quirks[] together with the standard DMI
matching functions, it must be terminated by a empty entry.
Since this entry is missing, an array out-of-bounds access occurs
every time the quirk list is processed.
Fix this by adding the terminating empty entry.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407091536.8b116b3d-lkp@intel.com
Fixes: 3cb1f40dfd ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240709143851.10097-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After commit 230e9fc286 ("slab: add SLAB_ACCOUNT flag"), we need to mark
the inode cache as SLAB_ACCOUNT, similar to commit 5d097056c9 ("kmemcg:
account for certain kmem allocations to memcg")
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
originally, stack closures were only used synchronously, and with the
original implementation of closure_sync() the ref never hit 0; thus,
closure_put_after_sub() assumes that if the ref hits 0 it's on the debug
list, in debug mode.
that's no longer true with the current implementation of closure_sync,
so we need a new magic so closure_debug_destroy() doesn't pop an assert.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Replace a comma between expression statements by a semicolon.
Fixes: efc1bb8a6f ("davinci: add power management support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit b5d91704f5 ("libceph: behave in mon_fault() if
cur_mon < 0") and use-after-free can still ensue on monc and objects
that hang off of it, with monc->auth and monc->monmap being
particularly susceptible to quickly being reused.
To fix this:
- clear monc->cur_mon and monc->hunting as part of closing the session
in ceph_monc_stop()
- bail from delayed_work() if monc->cur_mon is cleared, similar to how
it's done in mon_fault() and finish_hunting() (based on monc->hunting)
- call cancel_delayed_work_sync() after the session is closed
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/66857
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
minixfs now uses kmap_local_page(), so we can't call kunmap() to
undo it. This one call was missed as part of the commit this fixes.
Fixes: 6628f69ee6 (minixfs: Use dir_put_page() in minix_unlink() and minix_rename())
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240709195841.1986374-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The commit 6533e558c6 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c6 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a potential race between __update_and_free_hugetlb_folio() and
try_memory_failure_hugetlb():
CPU1 CPU2
__update_and_free_hugetlb_folio try_memory_failure_hugetlb
folio_test_hugetlb
-- It's still hugetlb folio.
folio_clear_hugetlb_hwpoison
spin_lock_irq(&hugetlb_lock);
__get_huge_page_for_hwpoison
folio_set_hugetlb_hwpoison
spin_unlock_irq(&hugetlb_lock);
spin_lock_irq(&hugetlb_lock);
__folio_clear_hugetlb(folio);
-- Hugetlb flag is cleared but too late.
spin_unlock_irq(&hugetlb_lock);
When the above race occurs, raw error page info will be leaked. Even
worse, raw error pages won't have hwpoisoned flag set and hit
pcplists/buddy. Fix this issue by deferring
folio_clear_hugetlb_hwpoison() until __folio_clear_hugetlb() is done. So
all raw error pages will have hwpoisoned flag set.
Link: https://lkml.kernel.org/r/20240708025127.107713-1-linmiaohe@huawei.com
Fixes: 32c877191e ("hugetlb: do not clear hugetlb dtor until allocating vmemmap")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The vmf->ptl in filemap_fault_recheck_pte_none() is still set from
handle_pte_fault(). But at the same time, we did a pte_unmap(vmf->pte).
After a pte_unmap(vmf->pte) unmap and rcu_read_unlock(), the page table
may be racily changed and vmf->ptl maybe fails to protect the actual page
table. Fix this by replacing pte_offset_map() with
pte_offset_map_nolock().
As David said, the PTL pointer might be stale so if we continue to use
it infilemap_fault_recheck_pte_none(), it might trigger UAF. Also, if
the PTL fails, the issue fixed by commit 58f327f2ce ("filemap: avoid
unnecessary major faults in filemap_fault()") might reappear.
Link: https://lkml.kernel.org/r/20240313012913.2395414-1-zhangpeng362@huawei.com
Fixes: 58f327f2ce ("filemap: avoid unnecessary major faults in filemap_fault()")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark get_current() and current_thread_info() functions as always_inline to
fix the following modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: get_current+0xc (section: .text.unlikely) -> initcall_level_names (section: .init.data)
The warning happens when these functions are called from an __init
function and they don't get inlined (remain in the .text section) while
the value they return points into .init.data section. Assuming
get_current() always returns a valid address, this situation can happen
only during init stage and accessing .init.data from .text section during
that stage should pose no issues.
Link: https://lkml.kernel.org/r/20240704132506.1011978-2-surenb@google.com
Fixes: 22d407b164 ("lib: add allocation tagging support for memory allocation profiling")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark alloc_tag_{save|restore} as always_inline to fix the following
modpost warnings:
WARNING: modpost: vmlinux: section mismatch in reference: alloc_tag_save+0x1c (section: .text.unlikely) -> initcall_level_names (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: alloc_tag_restore+0x3c (section: .text.unlikely) -> initcall_level_names (section: .init.data)
The warnings happen when these functions are called from an __init
function and they don't get inlined (remain in the .text section) while
the value returned by get_current() points into .init.data section.
Assuming get_current() always returns a valid address, this situation can
happen only during init stage and accessing .init.data from .text section
during that stage should pose no issues.
Link: https://lkml.kernel.org/r/20240704132506.1011978-1-surenb@google.com
Fixes: 22d407b164 ("lib: add allocation tagging support for memory allocation profiling")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407032306.gi9nZsBi-lkp@intel.com/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
X would not start in my old 32-bit partition (and the "n"-handling looks
just as wrong on 64-bit, but for whatever reason did not show up there):
"n" must be accumulated over all pages before it's added to "offset" and
compared with "copy", immediately after the skb_frag_foreach_page() loop.
Fixes: d2d30a376d ("net: allow skb_datagram_iter to be called from any context")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://patch.msgid.link/fef352e8-b89a-da51-f8ce-04bc39ee6481@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
