1
0
mirror of https://github.com/torvalds/linux.git synced 2024-12-21 18:42:44 +00:00
Commit Graph

25 Commits

Author SHA1 Message Date
Marcel Holtmann
882809fb72 Bluetooth: Switch HCI H5 driver to use hci_reset_dev() function
Instead of having the driver generate the HCI Hardware Error event
manually, just call hci_reset_dev() to trigger the upper stack reset.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-11-02 10:03:51 +02:00
Marcel Holtmann
b34490011d Bluetooth: Use HCI_EV_HARDWARE_ERROR define for event payload
When constructing the event payload for the HCI_Hardware_Error event
message, use the HCI_EV_HARDWARE_ERROR define.

In addition rename the variables from hard_err to hw_err to clearly
indicate that this is about the hardware error and not a hard error.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-11-02 10:00:53 +02:00
Loic Poulain
b509c02d0f Bluetooth: HCI H5 peer reset detection
H5 Specification says:
If a SYNC message is received while in the Active State, it is
assumed that the peer device has reset. The local device should
therefore perform a full reset of the upper stack, and start Link
Establishment again at the Uninitialized State. Upon entering the
Active State, the first packet sent shall have its SEQ and ACK
numbers set to zero.

This patch resets the HCI H5 driver data/state to unitialized and
reports an HCI hardware error event to notify the upper stack that
HCI synchronization has been lost. H5 will be re-synchronized and
upper stack should generate an HCI Reset command.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-10-31 19:54:34 +02:00
Loic Poulain
4807b51895 Bluetooth: Fix HCI H5 corrupted ack value
In this expression: seq = (seq - 1) % 8
seq (u8) is implicitly converted to an int in the arithmetic operation.
So if seq value is 0, operation is ((0 - 1) % 8) => (-1 % 8) => -1.
The new seq value is 0xff which is an invalid ACK value, we expect 0x07.
It leads to frequent dropped ACK and retransmission.
Fix this by using '&' binary operator instead of '%'.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2014-08-14 08:49:19 +02:00
Loic Poulain
37f468cd17 Bluetooth: Remove redundant calls to h5_reset_rx
h5_reset_rx is unconditionally called at the end of
h5_complete_rx_pkt, no need to call it anymore after
that.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-03 17:42:45 +02:00
Loic Poulain
48439d501e Bluetooth: Ignore H5 non-link packets in non-active state
When detecting a non-link packet, h5_reset_rx() frees the Rx skb.
Not returning after that will cause the upcoming h5_rx_payload()
call to dereference a now NULL Rx skb and trigger a kernel oops.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2014-06-23 18:22:48 +02:00
Valentin Ilie
a08b15e66e Bluetooth: Remove assignments in if-statements
Remove assignment in if-statements to be consistent with the coding
style.

Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-05 20:52:17 +02:00
Michael Knudsen
c327cddd18 Bluetooth: Stop BCSP/H5 timer before cleaning up
When stopping BCSP/H5, stop the retransmission timer before proceeding
to clean up packet queues.  The previous code had a race condition where
the timer could trigger after the packet lists and protocol structure
had been removed which led to dereferencing NULL or use-after-free bugs.

Signed-off-by: Michael Knudsen <m.knudsen@samsung.com>
Reported-by: Kirill Tkhai <ktkhai@parallels.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-03-04 11:03:14 +02:00
Marcel Holtmann
e1a2617069 Bluetooth: Provide hdev parameter to hci_recv_frame() driver callback
To avoid casting skb->dev into hdev, just let the drivers provide
the hdev directly when calling hci_recv_frame() function.

This patch also fixes up all drivers to provide the hdev.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11 09:45:34 +02:00
Johan Hedberg
e0482103c2 Bluetooth: Introduce a flags variable to Three-wire UART state
This patch introduces a flags variable to the Three-wire UART state
struct and converts the two existing bools in the struct into flags.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:49:24 -03:00
Johan Hedberg
afdc944c1b Bluetooth: Improve Three-wire UART configuration handling
The configuration request/response messages contain a configuration
field which contains the sliding window size (amount of unacked reliable
packets that can be pending). This patch makes sure that we configure
the correct size (minimum of local and remote values) and use it when
determining whether to send new packets or not.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:49:14 -03:00
Johan Hedberg
c826ed095d Bluetooth: Remove unnecessary h5_build_pkt function
The implementation of h5_build_packet can be moved into
h5_prepare_pkt since all h5_prepare_pkt does is determine whether the
packet is reliable and then call h5_build_packet.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:38 -03:00
Johan Hedberg
95c5c22097 Bluetooth: Implement proper low-power support for Three-wire UART
This patch adds on-demand wakeup request sending (and re-sendind) when
we are in low-power state. When the controller enters this state it will
send a sleep message after which the host is not allowed to send any
other packets until a wakeup request has been sent and the woken message
received as a response to it. The wakeup requests are re-sent
periodically until a woken message is received.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:37 -03:00
Johan Hedberg
f674a057c1 Bluetooth: Add initialization tracking to HCI Three-wire driver
This patch adds tracking for the uninitialized, initialized and active
states for Three-wire UART. This is needed so we can handle periodic
sending of the Link Establishment messages before reaching active state
and so that we do not try to do any higher level HCI data transmission
before reaching active state.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:35 -03:00
Johan Hedberg
10122d07ce Bluetooth: Add initial sleep support to Three-wire UART
This patch adds very basic support for the sleep related messages. The
only thing the code does right now is send a wakeup message as soon as
receiving a sleep one, essentially preventing the controller from going
to sleep.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:33 -03:00
Johan Hedberg
255a68e012 Bluetooth: Improve rx debug logs for Three-wire UART
Remove unnecessary debug logs and add some to more centralized places.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:32 -03:00
Johan Hedberg
cd1b44255c Bluetooth: Use delayed init for Three-wire UART
This patch takes into use the delayed initialization feature that the
Bluetooth UART framework provides.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:30 -03:00
Johan Hedberg
40f10224df Bluetooth: Add support for Three-wire Link Control packets
This patch adds basic support for parsing and sending Three-wire UART
Link Control packets.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:26 -03:00
Johan Hedberg
43eb12d789 Bluetooth: Fix/implement Three-wire reliable packet sending
This patch should complete the necessary code for sending reliable
Three-wire packets.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:24 -03:00
Johan Hedberg
01977c0bbb Bluetooth: Add Three-wire header value convenience macros
This patch adds convenience macros for reading Three-wire header values.
This will help make the code more readable.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:22 -03:00
Johan Hedberg
c0a1b73c3f Bluetooth: Add initial packet sending support to Three-wire UART
This patch adds initial packed encoding and sending support to the
Three-wire UART HCI transport driver.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:21 -03:00
Johan Hedberg
bc1f35b911 Bluetooth: Add basic packet parsing to Three-wire UART driver
This patch adds basic packet parsing to the Three-wire UART HCI driver
for packets received from the controller.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:19 -03:00
Johan Hedberg
3f27e95b83 Bluetooth: Add initial reliable packet support for Three-wire UART
This patch adds initial support for reliable packets along with the
necessary retransmission timer for the Three-wire UART HCI driver.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:48:13 -03:00
Johan Hedberg
7d664fbafa Bluetooth: Add basic state tracking to Three-wire UART driver
This patch adds basic state tracking and socket buffer handling to the
Three-wire UART (H5) HCI driver.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:34:40 -03:00
Johan Hedberg
7dec65c8a7 Bluetooth: Initial skeleton for Three-wire UART (H5) support
This patch adds the initial skeleton for Three-wire UART (H5) support
and hooks it up to the HCI UART framework.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-17 14:33:20 -03:00