When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Explicitly disable the CEC adapter in cec_devnode_unregister()
Usually this does not really do anything important, but for drivers
that use the CEC pin framework this is needed to properly stop the
hrtimer. Without this a crash would happen when such a driver is
unloaded with rmmod.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The valid_la boolean is used to check if the destination logical
address is either 15 (broadcast) or our logical address. If it is
for another logical address, then only adapters that have the
CEC_CAP_MONITOR_ALL capability can pass it on.
However, it is also used to do more detailed validity checks,
such as whether the message was broadcast when it should have been
directed, or vice versa, in which case the message must be ignored
according to the spec. But that should not apply to monitoring.
Add a new bool that just checks the LA and nothing else.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add support for this new CEC message. This was added in HDMI 2.1a.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If there is a hardware problem such as someone pulling the CEC line low
continuously, then the POLL message will fail with an error other than
OK, NACK, ABORTED or TIMEOUT. Log the tx_status value in that case to
help debug this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Using an activation counter to decide when the enable or disable the
cec adapter is not the best approach and can lead to race conditions.
Change this to determining the current status of the adapter, and
enable or disable the adapter accordingly.
It now only needs to be called whenever there is a chance that the
state changes, and it can handle enabling/disabling monitoring as
well if needed.
This simplifies the code and it should be a more robust approach as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the physical address changes (i.e. becomes invalid, then valid again)
while the adapter is still claiming free logical addresses, then trigger
a reconfiguration since any claimed LAs may now be stale.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If an adapter is trying to claim a free logical address then it is
in the 'is_configuring' state. If during that process the cable is
disconnected (HPD goes low, which in turn invalidates the physical
address), then cec_adap_unconfigure() is called, and that set the
is_configuring boolean to false, even though the thread that's
trying to claim an LA is still running.
Don't touch the is_configuring bool in cec_adap_unconfigure(), it
will eventually be cleared by the thread. By making that change
the cec_config_log_addr() function also had to change: it was
aborting if is_configuring became false (since that is what
cec_adap_unconfigure() did), but that no longer works. Instead
check if the physical address is invalid. That is a much
more appropriate check anyway.
This fixes a bug where the the adapter could be disabled even
though the device was still configuring. This could cause POLL
transmits to time out.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If, while trying to claim a free logical address, a POLL message
times out, then abort this process. A CEC_TX_STATUS_TIMEOUT
should be handled the same as a CEC_TX_STATUS_ABORTED.
This avoids a situation where transmits time out due to a
driver or hardware bug and it takes ages before the attempt
to find available free logical addresses finishes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The __cec_s_log_addrs() function can configure or unconfigure the
adapter. The ioctl handler in cec-api.c will prevent it from being
called to configure the adapter if it was already configured (or in
the process of configuring). But it can still be called to unconfigure
an already unconfigured adapter, and it didn't check for that.
This can cause cec_activate_cnt_dec() to be called too often, causing
a WARN_ON.
Instead first check if adap->log_addrs.num_log_addrs == 0 and return
since in that case the adapter is already unconfigured.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It's OK to keep the pending pin events when disabling or
enabling the 'adapter'. Zeroing this can cause a race condition
if this happens when the pin kthread is handling a pin event
and calls atomic_dec later, causing work_pin_num_events to become
negative.
Just leave pending events in the queue, they'll be read eventually.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the adap_enable callback is called the adap->lock is held.
When disabling the adapter it attempts to stop the kthread that
deals with receiving and transmitting messages. However, kthread_stop
waits for the thread to stop, so all that time adap->lock is held.
Unfortunately, the kernel thread itself can call functions that take
that same lock, so a deadlock can occur.
Change the logic to keep the kernel thread running and instead when
disabling the adapter, just set the pin to high, go to idle and then
to state OFF and disable the interrupt. Only stop the kernel thread
when the adapter is deleted.
This way disabling the adapter will not wait for anything and the
deadlock is avoided.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This new optional callback is called when the adapter is fully configured
or fully unconfigured. Some drivers may have to take action when this
happens.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Allow drivers to change the transmit timeout value, i.e. after how
long should a transmit be considered 'lost', i.e. the corresponding
cec_transmit_done_ts was never called.
Some CEC devices have their own timeout, and so this timeout value must be
longer than that hardware timeout value. If it is shorter then the
framework would consider the transmit lost, even though it is effectively
still in progress at the hardware level.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use call_(void_)op consistently in the CEC core framework. Ditto
for the cec pin ops. And check if !adap->devnode.unregistered before
calling each op. This avoids calls to ops when the device has been
unregistered and the underlying hardware may be gone.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The results of non-blocking transmits were not correctly communicated
to userspace.
Specifically:
1) if a non-blocking transmit was canceled, then rx_status wasn't set to 0
as it should.
2) if the non-blocking transmit succeeded, but the corresponding reply
never arrived (aborted or timed out), then tx_status wasn't set to 0
as it should, and rx_status was hardcoded to ABORTED instead of the
actual reason, such as TIMEOUT. In addition, adap->ops->received() was
never called, so drivers that want to do message processing themselves
would not be informed of the failed reply.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.
To signal this situation the new transmit_in_progress_aborted field is
set to true.
The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.
However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.
The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.
It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.
To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03 (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This field is only set, but never used. Drop it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmGtOFYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1hUH/1bmlOYsscJ7biqd
VECr5HhTg6iRvwWUiOpU27fLuBeAM1ZdF0oLuCtzvbK2h8lfTclcHfueihK0GIvX
ci8BvwpOYfUdDUWHglgvGXqICqYch3PiBVMFiRRRkzcpZdyCFCirAynLdOeusdTU
72Fi2RBaIM+U/5UVKcTx0J9WJsvFcG97lnNX5nT3dUmuoSW4WmX+h4vIe8VYFVmd
8q1gD17hPL+ThTKcZApn7IsArU1LNEGRg0tYItgMJo8AMTvsZjwR6yQgXeyuQ0Xk
xp6pZwzABtnL9dfNJ95q1GhsJBX5T5XvAVjt2uR1ADbgh6TDApC1VBKICm1Nva7g
uT6S0yE=
=JNL8
-----END PGP SIGNATURE-----
Merge tag 'v5.16-rc4' into media_tree
Linux 5.16-rc4
* tag 'v5.16-rc4': (984 commits)
Linux 5.16-rc4
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
x86/entry: Use the correct fence macro after swapgs in kernel CR3
fget: check that the fd still exists after getting a ref to it
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
powercap: DTPM: Drop unused local variable from init_dtpm()
io-wq: don't retry task_work creation failure on fatal conditions
serial: 8250_bcm7271: UART errors after resuming from S2
...
smatch warns about data->list not being removed from list:
drivers/media/cec/core/cec-adap.c:926 cec_transmit_msg_fh() warn: '&data->list' not removed from list
It is a false warning, but it doesn't hurt to make the code more robust
and safely unhook data->list and data->xfer_list together with a WARN_ON
if this is actually ever needed (this really shouldn't happen).
Note that fixing the data->list warning just replaced it with a new similar
warning for data->xfer_list, so both needed to be addressed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the reply for a non-blocking transmit arrives, the sequence
field for that reply was never filled in, so userspace would have no
way of associating the reply to the original transmit.
Copy the sequence field to ensure that this is now possible.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 0dbacebede ([media] cec: move the CEC framework out of staging and to media)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CEC pin framework has to wait for the CEC bus to be idle for the
requested Signal Free Time before it can start a transmit.
However, the check for that was off by one, so transmits would start one
bit period (2.4ms) too late.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cec pin timer overruns are measured in microseconds, but the variable
names include the millisecond symbol "ms". To avoid confusion, replace
"ms" with "us" in the variable names and printed status message.
Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The rx-arb-lost error injection command only works with <op> set to 'any'.
Explicitly say so in the usage message.
Also use [] to indicate that the <poll> argument is optional.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If CONFIG_I2C=m and CONFIG_CEC_CORE=y then of_find_i2c_device_by_node()
is not reachable. So use IS_REACHABLE instead of IS_ENABLED.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: a62943c145c1 ("media: cec-notifier: also search for HDMI devices on I2C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the cec_notifier_parse_hdmi_phandle function can only be used
if the HDMI device associated with the CEC device is a platform device.
Extend the function to cover I2C devices as well, as there do exist
some I2C HDMI devices which don't handle CEC internally and need an
external CEC adapter.
[hverkuil: add missing linux/i2c.h header]
[hverkuil: only attempt to find the i2c device if CONFIG_I2C is set]
Signed-off-by: Johan Fjeldtvedt <johfjeld@cisco.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Comment has 'then' repeated twice. Let's clean it up.
Use unsigned int to maintain naming consistency.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the CEC device was unregistered, then add EPOLLPRI to
the poll() mask. Otherwise a select() that only waits for
exceptions will not wake up. A select() that waits for
read and/or write events *will* wake up on an EPOLLERR, but
not (for some reason) if it just waits for exceptions.
Strangly the epoll functionality will wakeup on EPOLLERR if
you just wait for an exception, so in this respect select()
and epoll differ.
In the end it doesn't really matter, what matters is that
polling file handles are woken up on device unregistration.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a CEC device node is unregistered, then it should be marked as
unregistered before waking up any filehandles that are waiting for
an event.
This ensures that there is no race condition where an application can
call CEC_DQEVENT and have the ioctl return 0 instead of ENODEV.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make the code a bit more robust by checking if the adapter has
been unregistered at the start of cec_transmit_msg_fh() and
cec_received_msg_ts(). If it is unregistered, then just return.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The kthread_config relies on the main kthread (message processing
loop) to be present, so stop kthread_config before kthread.
It's unlikely to be a problem (and I've never seen any issues), but
if nothing else it makes sense to stop the threads in this order.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For some inexplicable reason I decided to call flush_scheduled_work()
instead of cancel_delayed_work_sync(). The problem with that is that
flush_scheduled_work() waits for *all* queued scheduled work to be
completed instead of just the work itself.
This can cause a deadlock if a CEC driver also schedules work that
takes the same lock. See the comments for flush_scheduled_work() in
linux/workqueue.h.
This is exactly what has been observed a few times.
This patch simply replaces flush_scheduled_work() by
cancel_delayed_work_sync().
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.8 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
rc-core kapi uses nanoseconds for infrared durations for receiving, and
microseconds for sending. The uapi already uses microseconds for both,
so this patch does not change the uapi.
Infrared durations do not need nanosecond resolution. IR protocols do not
have durations shorter than about 100 microseconds. Some IR hardware offers
250 microseconds resolution, which is sufficient for most protocols.
Better hardware has 50 microsecond resolution and is enough for every
protocol I am aware off.
Unify on microseconds everywhere. This simplifies the code since less
conversion between microseconds and nanoseconds needs to be done.
This affects:
- rx_resolution member of struct rc_dev
- timeout member of struct rc_dev
- duration member in struct ir_raw_event
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Patrick Lerda <patrick9876@free.fr>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Benjamin Valentin <benpicco@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this smatch warning:
drivers/media/cec/core/cec-api.c:156 cec_adap_g_log_addrs() warn: check that 'log_addrs' doesn't leak information (struct has a hole after
'features')
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use of the cec notifier framework is required to support
CEC_CAP_CONNECTOR_INFO but some devices do not want physical address
updates from the notifier. This adds an option to allow registering
with a cec notifier without getting address updates.
[hans: document the new adap_controls_phys_addr bool]
Signed-off-by: Jeff Chase <jnchase@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cec_adapter struct contained a waitq field that isn't used
anywhere, so drop this.
It also contained a phys_addrs array to store any reported physical
addresses. However, this was never actually used, so this field is
removed as well. The original idea was to let the core keep track of
this information, but nothing was ever done with this. Should this
be needed in the future then it is easy enough to resurrect this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
The log_addrs->log_addr_type[i] value is a u8 which is controlled by
the user and comes from the ioctl. If it's over 31 then that results in
undefined behavior (shift wrapping) and that leads to a Smatch static
checker warning. We already cap the value later so we can silence the
warning just by re-ordering the existing checks.
I think the UBSan checker will also catch this bug at runtime and
generate a warning. But otherwise the bug is harmless.
Fixes: 9881fe0ca1 ("[media] cec: add HDMI CEC framework (adapter)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation for moving CEC drivers to the CEC directory,
move the core to a separate place.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
