Also remove mm_get_huge_zero_page() now it has no users.
Link: https://lkml.kernel.org/r/20240326202833.523759-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all callers of is_huge_zero_page() converted, we can now switch the
huge_zero_page itself from being a compound page to a folio.
Link: https://lkml.kernel.org/r/20240326202833.523759-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the pmd directly to a folio and use it. Turns four calls to
compound_head() into one.
Link: https://lkml.kernel.org/r/20240326202833.523759-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert directly from a pmd to a folio without going through another
representation first. For now this is just a slightly shorter way to
write it, but it might end up being more efficient later.
Link: https://lkml.kernel.org/r/20240326202833.523759-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is the folio equivalent of is_huge_zero_page(). It doesn't add any
efficiency, but it does prevent the caller from passing a tail page and
getting confused when the predicate returns false.
Link: https://lkml.kernel.org/r/20240326202833.523759-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Very deep RB tree requires rebalance at times. That contributes to the
zswap fault latencies. Xarray does not need to perform tree rebalance.
Replacing RB tree to xarray can have some small performance gain.
One small difference is that xarray insert might fail with ENOMEM, while
RB tree insert does not allocate additional memory.
The zswap_entry size will reduce a bit due to removing the RB node, which
has two pointers and a color field. Xarray store the pointer in the
xarray tree rather than the zswap_entry. Every entry has one pointer from
the xarray tree. Overall, switching to xarray should save some memory, if
the swap entries are densely packed.
Notice the zswap_rb_search and zswap_rb_insert often followed by
zswap_rb_erase. Use xa_erase and xa_store directly. That saves one tree
lookup as well.
Remove zswap_invalidate_entry due to no need to call zswap_rb_erase any
more. Use zswap_free_entry instead.
The "struct zswap_tree" has been replaced by "struct xarray". The tree
spin lock has transferred to the xarray lock.
Run the kernel build testing 5 times for each version, averages:
(memory.max=2GB, zswap shrinker and writeback enabled, one 50GB swapfile,
24 HT core, 32 jobs)
mm-unstable-4aaccadb5c04 xarray v9
user 3548.902 3534.375
sys 522.232 520.976
real 202.796 200.864
[chrisl@kernel.org: restore original comment "erase" to "invalidate"]
Link: https://lkml.kernel.org/r/20240326-zswap-xarray-v10-1-bf698417c968@kernel.org
Link: https://lkml.kernel.org/r/20240326-zswap-xarray-v9-1-d2891a65dfc7@kernel.org
Signed-off-by: Chris Li <chrisl@kernel.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Earlier, in commit 1dd214b8f2 ("mm: page_alloc: avoid merging
non-fallbackable pageblocks with others"), migrate type MIGRATE_CMA and
MIGRATE_ISOLATE are removed from fallbacks list since they are never used.
Later on, in commit ("aa02d3c174ab mm/page_alloc: reduce fallbacks to
(MIGRATE_PCPTYPES - 1)"), the array column size is reduced to
'MIGRATE_PCPTYPES - 1'. In fact, the array row size need be reduced to
MIGRATE_PCPTYPES too since it's only covering rows of the number
MIGRATE_PCPTYPES. Even though the current code has handled cases
when the migratetype is CMA, HIGHATOMIC and MEMORY_ISOLATION, making
the row size right is still good to avoid future error and confusion.
Link: https://lkml.kernel.org/r/20240326061134.1055295-8-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On one node, for lower zone's ->lowmem_reserve[], it will show how much
memory is reserved in this lower zone to avoid excessive page allocation
from the relevant higher zone's fallback allocation.
However, currently lower zone's lowmem_reserve[] element will be filled
even though the relevant higher zone is empty. That doesnt' make sense
and can cause confusion.
E.g on node 0 of one system as below, it has zone
DMA/DMA32/NORMAL/MOVABLE/DEVICE, among them zone MOVABLE/DEVICE are the
highest and both are empty. In zone DMA/DMA32's protection array, we can
see that it has value for zone MOVABLE and DEVICE.
Node 0, zone DMA
......
pages free 2816
boost 0
min 7
low 10
high 13
spanned 4095
present 3998
managed 3840
cma 0
protection: (0, 1582, 23716, 23716, 23716)
......
Node 0, zone DMA32
pages free 403269
boost 0
min 753
low 1158
high 1563
spanned 1044480
present 487039
managed 405070
cma 0
protection: (0, 0, 22134, 22134, 22134)
......
Node 0, zone Normal
pages free 5423879
boost 0
min 10539
low 16205
high 21871
spanned 5767168
present 5767168
managed 5666438
cma 0
protection: (0, 0, 0, 0, 0)
......
Node 0, zone Movable
pages free 0
boost 0
min 32
low 32
high 32
spanned 0
present 0
managed 0
cma 0
protection: (0, 0, 0, 0, 0)
Node 0, zone Device
pages free 0
boost 0
min 0
low 0
high 0
spanned 0
present 0
managed 0
cma 0
protection: (0, 0, 0, 0, 0)
Here, clear out the element value in lower zone's ->lowmem_reserve[] if the
relevant higher zone is empty.
And also replace space with tab in _deferred_grow_zone()
Link: https://lkml.kernel.org/r/20240326061134.1055295-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The noinline attribute has been taken off in commit 9420f89db2 ("mm:
move most of core MM initialization to mm/mm_init.c"). So remove the
unneeded code comment above deferred_grow_zone().
And also remove the unneeded bracket in deferred_init_pages().
Link: https://lkml.kernel.org/r/20240326061134.1055295-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_NUMA=n, MAX_NUMNODES is always 1 because Kconfig item
NODES_SHIFT depends on NUMA. So in !NUMA version of build_zonelists(), no
need to bother with the two for loop because code execution won't enter
them ever.
Here, remove those unneeded codes in !NUMA version of build_zonelists().
[bhe@redhat.com: remove unused locals]
Link: https://lkml.kernel.org/r/ZgQL1WOf9K88nLpQ@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240326061134.1055295-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's only called in mm/mm_init.c now.
Link: https://lkml.kernel.org/r/20240326061134.1055295-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Because memory-less node's ->node_present_pages and its zone's
->present_pages are all 0, the judgement before calling node_set_state()
to set N_MEMORY, N_HIGH_MEMORY, N_NORMAL_MEMORY for node is enough to skip
memory-less node. The 'continue;' statement inside for_each_node() loop
of free_area_init() is gilding the lily.
Here, remove the special handling to make memory-less node share the same
code flow as normal node.
And also rephrase the code comments above the 'continue' statement
and move them above above line 'if (pgdat->node_present_pages)'.
[bhe@redhat.com: redo code comments, per Mike]
Link: https://lkml.kernel.org/r/ZhYJAVQRYJSTKZng@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240326061134.1055295-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/init: minor clean up and improvement".
These are all observed when going through code flow during mm init.
This patch (of 7):
When CONFIG_SPARSEMEM_EXTREME is enabled, mem_section need be initialized
to point at a two-dimensional array, and its 1st dimension of length
NR_SECTION_ROOTS will be dynamically allocated. Once the allocation is
done, it's available for all nodes.
So take the 1st dimension of mem_section initialization out of
memory_present()(), and put it into memblocks_present() which is a more
appripriate place.
Link: https://lkml.kernel.org/r/20240326061134.1055295-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240326061134.1055295-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hooks make multiple calls to functions in mm/memcontrol.c, including
to th current_obj_cgroup() marked __always_inline. It might be faster to
make a single call to the hook in mm/memcontrol.c instead. The hooks also
don't use almost anything from mm/slub.c. obj_full_size() can move with
the hooks and cache_vmstat_idx() to the internal mm/slab.h
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-2-d85d2563287a@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg_kmem hooks refactoring", v3.
This patch (of 2):
The MEMCG_KMEM integration with slab currently relies on two hooks during
allocation. memcg_slab_pre_alloc_hook() determines the objcg and charges
it, and memcg_slab_post_alloc_hook() assigns the objcg pointer to the
allocated object(s).
As Linus pointed out, this is unnecessarily complex. Failing to charge
due to memcg limits should be rare, so we can optimistically allocate the
object(s) and do the charging together with assigning the objcg pointer in
a single post_alloc hook. In the rare case the charging fails, we can
free the object(s) back.
This simplifies the code (no need to pass around the objcg pointer) and
potentially allows to separate charging from allocation in cases where
it's common that the allocation would be immediately freed, and the memcg
handling overhead could be saved.
[vbabka@suse.cz: fix call to memcg_alloc_abort_single()]
Link: https://lkml.kernel.org/r/4af50be2-4109-45e5-8a36-2136252a635e@suse.cz
[roman.gushchin@linux.dev: comment fixup]
Link: https://lkml.kernel.org/r/Zg2LsNm6twOmG69l@P9FQF9L96D.corp.robot.car
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-0-d85d2563287a@suse.cz
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-1-d85d2563287a@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=whYOOdM7jWy5jdrAm8LxcgCMFyk2bt8fYYvZzM4U-zAQA@mail.gmail.com/
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mostly rewording, but remove entirely the copy of page_fixed_fake_head()
in the documentation; we can refer people to the actual source if
necessary.
Link: https://lkml.kernel.org/r/20240326171045.410737-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use slub->__page_flags instead. We can also remove the assertion that
it's not a tail page as struct slab never points to a tail page.
Link: https://lkml.kernel.org/r/20240326171045.410737-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All implementations that aren't no-ops just set a bit in the flags, and we
want to use the folio flags rather than the page flags for that. Rename
it to arch_clear_hugetlb_flags() while we're touching it so nobody thinks
it's used for THP.
[willy@infradead.org: fix arm64 build]
Link: https://lkml.kernel.org/r/ZgQvNKGdlDkwhQEX@casper.infradead.org
Link: https://lkml.kernel.org/r/20240326171045.410737-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
None of the functions called by page_mapped() modify the page or folio, so
mark them all as const.
Link: https://lkml.kernel.org/r/20240326171045.410737-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function does not modify its argument; let the callers know that so
they can make better optimisation decisions.
Link: https://lkml.kernel.org/r/20240326171045.410737-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to constify other functions, we need page_ext_get() to be const.
This is no problem as lookup_page_ext() already takes a const argument.
Link: https://lkml.kernel.org/r/20240326171045.410737-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_is_secretmem() is currently only used during GUP-fast. Nowadays,
folio_fast_pin_allowed() performs similar checks during GUP-fast and
contains a lot of careful handling -- READ_ONCE() -- , sanity checks --
lockdep_assert_irqs_disabled() -- and helpful comments on how this
handling is safe and correct.
So let's merge folio_is_secretmem() into folio_fast_pin_allowed(). Rename
folio_fast_pin_allowed() to gup_fast_folio_allowed(), to better match the
new semantics.
Link: https://lkml.kernel.org/r/20240326143210.291116-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: xingwei lee <xrivendell7@gmail.com>
Cc: yue sun <samsun1006219@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
follow_phys is only used by two callers in arch/x86/mm/pat/memtype.c.
Move it there and hardcode the two arguments that get the same values
passed by both callers.
[david@redhat.com: conflict resolutions]
Link: https://lkml.kernel.org/r/20240403212131.929421-4-david@redhat.com
Link: https://lkml.kernel.org/r/20240324234542.2038726-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fei Li <fei1.li@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove follow_pfn now that the last user is gone.
Link: https://lkml.kernel.org/r/20240324234542.2038726-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fei Li <fei1.li@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use group allocation/free of per-cpu counters api to accelerate
wb_init/exit() and simplify code.
Link: https://lkml.kernel.org/r/20240325035635.49342-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
1. Add information about the behavior of huge page splitting, with
respect to page/folio refcounts, and gup/pup pins.
2. Update and clarify the existing documentation, to compensate for the
ravages of time and code change.
Link: https://lkml.kernel.org/r/20240325044452.217463-1-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two types of iterators mas and vmi in the current code. If the
maple tree comes from the mm structure, we can use the vma iterator.
Avoid using mas directly as possible.
Keep using mas for the mt_detach tree, since it doesn't come from the mm
structure.
Remove as many uses of mas as possible, but we will still have a few that
must be passed through in unmap_vmas() and free_pgtables().
Also introduce vma_iter_reset, vma_iter_{prev, next}_range_limit and
vma_iter_area_{lowest, highest} helper functions for using the vma
interator.
Link: https://lkml.kernel.org/r/20240325063258.1437618-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the current calculation of calc_nr_kernel_pages() has taken into
consideration of kernel reserved memory, no need to have
arch_reserved_kernel_pages() any more.
Link: https://lkml.kernel.org/r/20240325145646.1044760-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, in free_area_init_core(), when initialize zone's field, a rough
value is set to zone->managed_pages. That value is calculated by
(zone->present_pages - memmap_pages).
In the meantime, add the value to nr_all_pages and nr_kernel_pages which
represent all free pages of system (only low memory or including HIGHMEM
memory separately). Both of them are gonna be used in
alloc_large_system_hash().
However, the rough calculation and setting of zone->managed_pages is
meaningless because
a) memmap pages are allocated on units of node in sparse_init() or
alloc_node_mem_map(pgdat); The simple (zone->present_pages -
memmap_pages) is too rough to make sense for zone;
b) the set zone->managed_pages will be zeroed out and reset with
acutal value in mem_init() via memblock_free_all(). Before the
resetting, no buddy allocation request is issued.
Here, remove the meaningless and complicated calculation of
(zone->present_pages - memmap_pages), directly set zone->managed_pages as
zone->present_pages for now. It will be adjusted in mem_init().
And also remove the assignment of nr_all_pages and nr_kernel_pages in
free_area_init_core(). Instead, call the newly added
calc_nr_kernel_pages() to count up all free but not reserved memory in
memblock and assign to nr_all_pages and nr_kernel_pages. The counting
excludes memmap_pages, and other kernel used data, which is more accurate
than old way and simpler, and can also cover the ppc required
arch_reserved_kernel_pages() case.
And also clean up the outdated code comment above free_area_init_core().
And free_area_init_core() is easy to understand now, no need to add words
to explain.
[bhe@redhat.com: initialize zone->managed_pages as zone->present_pages for now]
Link: https://lkml.kernel.org/r/ZgU0bsJ2FEjykvju@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240325145646.1044760-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is a preparation to calculate nr_kernel_pages and nr_all_pages, both
of which will be used later in alloc_large_system_hash().
nr_all_pages counts up all free but not reserved memory in memblock
allocator, including HIGHMEM memory. While nr_kernel_pages counts up all
free but not reserved low memory in memblock allocator, excluding HIGHMEM
memory.
Link: https://lkml.kernel.org/r/20240325145646.1044760-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now nobody calls set_dma_reserve() to set value for dma_reserve, remove
set_dma_reserve(), global variable dma_reserve and the codes using it.
Link: https://lkml.kernel.org/r/20240325145646.1044760-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of doing multiple tree walks, do one optimism range check with
lock hold, and exit if raced with another insertion. If a shadow exists,
check it with a new xas_get_order helper before releasing the lock to
avoid redundant tree walks for getting its order.
Drop the lock and do the allocation only if a split is needed.
In the best case, it only need to walk the tree once. If it needs to
alloc and split, 3 walks are issued (One for first ranged conflict check
and order retrieving, one for the second check after allocation, one for
the insert after split).
Testing with 4K pages, in an 8G cgroup, with 16G brd as block device:
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap --rw=randread --time_based \
--ramp_time=30s --runtime=5m --group_reporting
Before:
bw ( MiB/s): min= 1027, max= 3520, per=100.00%, avg=2445.02, stdev=18.90, samples=8691
iops : min=263001, max=901288, avg=625924.36, stdev=4837.28, samples=8691
After (+7.3%):
bw ( MiB/s): min= 493, max= 3947, per=100.00%, avg=2625.56, stdev=25.74, samples=8651
iops : min=126454, max=1010681, avg=672142.61, stdev=6590.48, samples=8651
Test result with THP (do a THP randread then switch to 4K page in hope it
issues a lot of splitting):
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap -thp=1 --readonly \
--rw=randread --time_based --ramp_time=30s --runtime=10m \
--group_reporting
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap \
--rw=randread --time_based --runtime=5s --group_reporting
Before:
bw ( KiB/s): min= 4141, max=14202, per=100.00%, avg=7935.51, stdev=96.85, samples=18976
iops : min= 1029, max= 3548, avg=1979.52, stdev=24.23, samples=18976·
READ: bw=4545B/s (4545B/s), 4545B/s-4545B/s (4545B/s-4545B/s), io=64.0KiB (65.5kB), run=14419-14419msec
After (+12.5%):
bw ( KiB/s): min= 4611, max=15370, per=100.00%, avg=8928.74, stdev=105.17, samples=19146
iops : min= 1151, max= 3842, avg=2231.27, stdev=26.29, samples=19146
READ: bw=4635B/s (4635B/s), 4635B/s-4635B/s (4635B/s-4635B/s), io=64.0KiB (65.5kB), run=14137-14137msec
The performance is better for both 4K (+7.5%) and THP (+12.5%) cached read.
Link: https://lkml.kernel.org/r/20240415171857.19244-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__filemap_add_folio only has two callers, one never passes hugetlb folio
and one always passes in hugetlb folio. So move the hugetlb related
cgroup charging out of it to make the code cleaner.
Link: https://lkml.kernel.org/r/20240415171857.19244-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/filemap: optimize folio adding and splitting", v4.
Currently, at least 3 tree walks are needed for filemap folio adding if
the folio is previously evicted. One for getting the order of current
slot, one for ranged conflict check, and one for another order retrieving.
If a split is needed, more walks are needed.
This series is trying to merge these walks, and speed up
filemap_add_folio, I see a 7.5% - 12.5% performance gain for fio stress
test.
So instead of doing multiple tree walks, do one optimism range check with
lock hold, and exit if raced with another insertion. If a shadow exists,
check it with a new xas_get_order helper before releasing the lock to
avoid redundant tree walks for getting its order.
Drop the lock and do the allocation only if a split is needed.
In the best case, it only need to walk the tree once. If it needs to
alloc and split, 3 walks are issued (One for first ranged conflict check
and order retrieving, one for the second check after allocation, one for
the insert after split).
Testing with 4K pages, in an 8G cgroup, with 16G brd as block device:
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap --rw=randread --time_based \
--ramp_time=30s --runtime=5m --group_reporting
Before:
bw ( MiB/s): min= 1027, max= 3520, per=100.00%, avg=2445.02, stdev=18.90, samples=8691
iops : min=263001, max=901288, avg=625924.36, stdev=4837.28, samples=8691
After (+7.3%):
bw ( MiB/s): min= 493, max= 3947, per=100.00%, avg=2625.56, stdev=25.74, samples=8651
iops : min=126454, max=1010681, avg=672142.61, stdev=6590.48, samples=8651
Test result with THP (do a THP randread then switch to 4K page in hope it
issues a lot of splitting):
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap -thp=1 --readonly \
--rw=randread --time_based --ramp_time=30s --runtime=10m \
--group_reporting
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap \
--rw=randread --time_based --runtime=5s --group_reporting
Before:
bw ( KiB/s): min= 4141, max=14202, per=100.00%, avg=7935.51, stdev=96.85, samples=18976
iops : min= 1029, max= 3548, avg=1979.52, stdev=24.23, samples=18976·
READ: bw=4545B/s (4545B/s), 4545B/s-4545B/s (4545B/s-4545B/s), io=64.0KiB (65.5kB), run=14419-14419msec
After (+10.4%):
bw ( KiB/s): min= 4611, max=15370, per=100.00%, avg=8928.74, stdev=105.17, samples=19146
iops : min= 1151, max= 3842, avg=2231.27, stdev=26.29, samples=19146
READ: bw=4635B/s (4635B/s), 4635B/s-4635B/s (4635B/s-4635B/s), io=64.0KiB (65.5kB), run=14137-14137msec
The performance is better for both 4K (+7.5%) and THP (+12.5%) cached read.
This patch (of 4):
xas_split_alloc could fail with NOMEM, and in such case, it should abort
early instead of keep going and fail the xas_split below.
Link: https://lkml.kernel.org/r/20240416071722.45997-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-2-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Callers of folio_estimated_sharers() only care about "mapped shared vs.
mapped exclusively", not the exact estimate of sharers. Let's consolidate
and unify the condition users are checking. While at it clarify the
semantics and extend the discussion on the fuzziness.
Use the "likely mapped shared" terminology to better express what the
(adjusted) function actually checks.
Whether a partially-mappable folio is more likely to not be partially
mapped than partially mapped is debatable. In the future, we might be
able to improve our estimate for partially-mappable folios, though.
Note that we will now consistently detect "mapped shared" only if the
first subpage is actually mapped multiple times. When the first subpage
is not mapped, we will consistently detect it as "mapped exclusively".
This change should currently only affect the usage in
madvise_free_pte_range() and queue_folios_pte_range() for large folios: if
the first page was already unmapped, we would have skipped the folio.
[david@redhat.com: folio_likely_mapped_shared() kerneldoc fixup]
Link: https://lkml.kernel.org/r/dd0ad9f2-2d7a-45f3-9ba3-979488c7dd27@redhat.com
Link: https://lkml.kernel.org/r/20240227201548.857831-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the source folio is on deferred split list, it is likely some subpages
are not used. Split it before migration to avoid migrating unused
subpages.
Commit 616b837153 ("mm: thp: enable thp migration in generic path") did
not check if a THP is on deferred split list before migration, thus, the
destination THP is never put on deferred split list even if the source THP
might be. The opportunity of reclaiming free pages in a partially mapped
THP during deferred list scanning is lost, but no other harmful
consequence is present[1].
[1]: https://lore.kernel.org/linux-mm/03CE3A00-917C-48CC-8E1C-6A98713C817C@nvidia.com/
[zi.yan@sent.com: fix an error in migrate_misplaced_folio()]
Link: https://lkml.kernel.org/r/20240326150031.569387-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20240322193304.522496-1-zi.yan@sent.com
Fixes: 616b837153 ("mm: thp: enable thp migration in generic path")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Within try_to_unmap_one(), page_vma_mapped_walk() races with other PTE
modifications preceded by pte clear. While iterating over PTEs of a large
folio, it only starts acquiring PTL from the first valid (present) PTE.
PTE modifications can temporarily set PTEs to pte_none. Consequently, the
initial PTEs of a large folio might be skipped in try_to_unmap_one().
For example, for an anon folio, if we skip PTE0, we may have PTE0 which is
still present, while PTE1 ~ PTE(nr_pages - 1) are swap entries after
try_to_unmap_one().
So folio will be still mapped, the folio fails to be reclaimed and is put
back to LRU in this round.
This also breaks up PTEs optimization such as CONT-PTE on this large folio
and may lead to accident folio_split() afterwards. And since a part of
PTEs are now swap entries, accessing those parts will introduce overhead -
do_swap_page. Although the kernel can withstand all of the above issues,
the situation still seems quite awkward and warrants making it more ideal.
The same race also occurs with small folios, but they have only one PTE,
thus, it won't be possible for them to be partially unmapped.
This patch holds PTL from PTE0, allowing us to avoid reading PTE values
that are in the process of being transformed. With stable PTE values, we
can ensure that this large folio is either completely reclaimed or that
all PTEs remain untouched in this round.
A corner case is that if we hold PTL from PTE0 and most initial PTEs have
been really unmapped before that, we may increase the duration of holding
PTL. Thus we only apply this optimization to folios which are still
entirely mapped (not in deferred_split list).
[akpm@linux-foundation.org: rewrap comment, per Matthew]
Link: https://lkml.kernel.org/r/20240306095219.71086-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If called by __get_vm_area_node(), by open coding the field assignments of
'struct vm_struct *vm', and move the vm->flags and vm->caller assignments
into __get_vm_area_node(), the passed in arguments 'flags' and 'caller'
can be removed.
This alleviates overloaded arguments passed in for alloc_vmap_area().
Link: https://lkml.kernel.org/r/20240309044454.648888-1-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If there are too many folios that are recently evicted in a file, then
they will probably continue to be evicted. In such situation, there is no
positive effect to read-ahead this file since it is only a waste of IO.
The mmap_miss is increased in do_sync_mmap_readahead() and decreased in
both do_async_mmap_readahead() and filemap_map_pages(). In order to skip
read-ahead in above scenario, the mmap_miss have to increased exceed
MMAP_LOTSAMISS. This can be done by stop decreased mmap_miss when folio
has workingset flag. The async path is not to care because in above
scenario, it's hard to run into the async path.
[liushixin2@huawei.com: add comments]
Link: https://lkml.kernel.org/r/20240326065026.1910584-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20240322093555.226789-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jinjiang Tu <tujinjiang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix I/O high when memory almost met memcg limit", v2.
Recently, when install package in a docker which almost reached its memory
limit, the installer has no respond severely for more than 15 minutes.
During this period, I/O stays high(~1G/s) and influence the whole machine.
I've constructed a use case as follows:
1. create a docker:
$ cat test.sh
#!/bin/bash
docker rm centos7 --force
docker create --name centos7 --memory 4G --memory-swap 6G centos:7 /usr/sbin/init
docker start centos7
sleep 1
docker cp ./alloc_page centos7:/
docker cp ./reproduce.sh centos7:/
docker exec -it centos7 /bin/bash
2. try reproduce the problem in docker:
$ cat reproduce.sh
#!/bin/bash
while true; do
flag=$(ps -ef | grep -v grep | grep alloc_page| wc -l)
if [ "$flag" -eq 0 ]; then
/alloc_page &
fi
sleep 30
start_time=$(date +%s)
yum install -y expect > /dev/null 2>&1
end_time=$(date +%s)
elapsed_time=$((end_time - start_time))
echo "$elapsed_time seconds"
yum remove -y expect > /dev/null 2>&1
done
$ cat alloc_page.c:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#define SIZE 1*1024*1024 //1M
int main()
{
void *addr = NULL;
int i;
for (i = 0; i < 1024 * 6 - 50;i++) {
addr = (void *)malloc(SIZE);
if (!addr)
return -1;
memset(addr, 0, SIZE);
}
sleep(99999);
return 0;
}
We found that this problem is caused by a lot ot meaningless read-ahead.
Since the docker is almost met memory limit, the page will be reclaimed
immediately after read-ahead and will read-ahead again immediately. The
program is executed slowly and waste a lot of I/O resource.
These two patch aim to break the read-ahead in above scenario.
[1] https://lore.kernel.org/linux-mm/c2f4a2fa-3bde-72ce-66f5-db81a373fdbc@huawei.com/T/
[2] https://lore.kernel.org/all/20240201100835.1626685-1-liushixin2@huawei.com/
[3] https://lore.kernel.org/all/20240201173130.frpaqpy7iyzias5j@quack3/
This patch (of 2):
When filemap_add_folio() return -ENOMEM, break read-ahead loop like what
filemap_alloc_folio() does.
Link: https://lkml.kernel.org/r/20240322093555.226789-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20240322093555.226789-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit d0637c505f ("arm64: enable THP_SWAP for arm64") brings up
THP_SWAP on ARM64, but it doesn't enable THP_SWP on hardware with MTE as
the MTE code works with the assumption tags save/restore is always
handling a folio with only one page.
The limitation should be removed as more and more ARM64 SoCs have this
feature. Co-existence of MTE and THP_SWAP becomes more and more
important.
This patch makes MTE tags saving support large folios, then we don't need
to split large folios into base pages for swapping out on ARM64 SoCs with
MTE any more.
arch_prepare_to_swap() should take folio rather than page as parameter
because we support THP swap-out as a whole. It saves tags for all pages
in a large folio.
As now we are restoring tags based-on folio, in arch_swap_restore(), we
may increase some extra loops and early-exitings while refaulting a large
folio which is still in swapcache in do_swap_page(). In case a large
folio has nr pages, do_swap_page() will only set the PTE of the particular
page which is causing the page fault. Thus do_swap_page() runs nr times,
and each time, arch_swap_restore() will loop nr times for those subpages
in the folio. So right now the algorithmic complexity becomes O(nr^2).
Once we support mapping large folios in do_swap_page(), extra loops and
early-exitings will decrease while not being completely removed as a large
folio might get partially tagged in corner cases such as, 1. a large
folio in swapcache can be partially unmapped, thus, MTE tags for the
unmapped pages will be invalidated; 2. users might use mprotect() to set
MTEs on a part of a large folio.
arch_thp_swp_supported() is dropped since ARM64 MTE was the only one who
needed it.
Link: https://lkml.kernel.org/r/20240322114136.61386-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As discussed in previous thread [1], there is an inconsistency when
handing hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
To make hugetlb migration strategy more clear, we should list all the scenarios
of hugetlb migration and analyze whether allocation fallback is permitted:
1) Memory offline: will call dissolve_free_huge_pages() to free the
freed hugetlb, and call do_migrate_range() to migrate the in-use
hugetlb. Both can break the per-node hugetlb pool, but as this is an
explicit offlining operation, no better choice. So should allow the
hugetlb allocation fallback.
2) Memory failure: same as memory offline. Should allow fallback to a
different node might be the only option to handle it, otherwise the
impact of poisoned memory can be amplified.
3) Longterm pinning: will call migrate_longterm_unpinnable_pages() to
migrate in-use and not-longterm-pinnable hugetlb, which can break the
per-node pool. But we should fail to longterm pinning if can not
allocate on current node to avoid breaking the per-node pool.
4) Syscalls (mbind, migrate_pages, move_pages): these are explicit
users operation to move pages to other nodes, so fallback to other
nodes should not be prohibited.
5) alloc_contig_range: used by CMA allocation and virtio-mem
fake-offline to allocate given range of pages. Now the freed hugetlb
migration is not allowed to fallback, to keep consistency, the in-use
hugetlb migration should be also not allowed to fallback.
6) alloc_contig_pages: used by kfence, pgtable_debug etc. The strategy
should be consistent with that of alloc_contig_range().
Based on the analysis of the various scenarios above, introducing a new
helper to determine whether fallback is permitted according to the
migration reason..
[1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/3519fcd41522817307a05b40fb551e2e17e68101.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "make the hugetlb migration strategy consistent", v2.
As discussed in previous thread [1], there is an inconsistency when
handling hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
This patchset tries to make the hugetlb migration strategy more clear
and consistent. Please find details in each patch.
[1]
https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
This patch (of 2):
To support different hugetlb allocation strategies during hugetlb
migration based on various migration reasons, record the migration reason
in the migration_target_control structure as a preparation.
Link: https://lkml.kernel.org/r/cover.1709719720.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/7b95d4981e07211f57139fc5b1f7ce91b920cee4.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When allocating a new memory area where the mapping address range is
known, it is observed that the vmap_node->busy.lock is acquired twice.
The first acquisition occurs in the alloc_vmap_area() function when
inserting the vm area into the vm mapping red-black tree. The second
acquisition occurs in the setup_vmalloc_vm() function when updating the
properties of the vm, such as flags and address, etc.
Combine these two operations together in alloc_vmap_area(), which improves
scalability when the vmap_node->busy.lock is contended. By doing so, the
need to acquire the lock twice can also be eliminated to once.
With the above change, tested on intel sapphire rapids platform(224 vcpu),
a 4% performance improvement is gained on
stress-ng/pthread(https://github.com/ColinIanKing/stress-ng), which is the
stress test of thread creations.
Link: https://lkml.kernel.org/r/20240307021440.64967-1-rulin.huang@intel.com
Co-developed-by: "Chen, Tim C" <tim.c.chen@intel.com>
Signed-off-by: "Chen, Tim C" <tim.c.chen@intel.com>
Co-developed-by: "King, Colin" <colin.king@intel.com>
Signed-off-by: "King, Colin" <colin.king@intel.com>
Signed-off-by: rulinhuang <rulin.huang@intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Wangyang Guo <wangyang.guo@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kmemleak ia a memory leak checker. KASAN is also a memory checker but it
focuses more on finding out-of-bounds and use-after-free bugs. Since
kmemleak is inherently slow especially on systems with large number of
CPUs, adding KASAN instrumentation will make it slower even more. As
kmemleak is not for production use, the utility of enabling KASAN there is
questionable.
This patch disables KASAN instrumentation for configurations that enable
both of them to slightly reduce performance overhead.
Link: https://lkml.kernel.org/r/20240307190548.963626-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/kmemleak: Minor cleanup & performance tuning".
This series contains 2 simple cleanup patches to slightly reduce memory
and performance overhead.
This patch (of 2):
With commit 56a61617dd ("mm: use stack_depot for recording kmemleak's
backtrace"), the size of kmemleak_object has been reduced by 128 bytes for
64-bit arches. The replacement "depot_stack_handle_t trace_handle" is
actually just 4 bytes long leaving a hole of 4 bytes. By moving up
trace_handle to another existing 4-byte hold, we can save 8 more bytes
from kmemleak_object reducing its overall size from 248 to 240 bytes.
Link: https://lkml.kernel.org/r/20240307190548.963626-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20240307190548.963626-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nr_stored was introduced by commit b5ba474f3f ("zswap: shrink zswap pool
based on memory pressure") as a per zswap_pool counter of the number of
stored pages that are not same-filled pages. It is used in
zswap_shrinker_count() to scale the number of freeable compressed pages by
the compression ratio. That is, to reduce the amount of writeback from
zswap with higher compression ratios as the ROI from IO diminishes.
Later on, commit bf9b7df23c ("mm/zswap: global lru and shrinker shared
by all zswap_pools") made the shrinker global (not per zswap_pool), and
replaced nr_stored with nr_zswap_stored (initially introduced as
zswap.nr_stored), which is now a global counter.
The counter is now awfully close to zswap_stored_pages. The only
difference is that the latter also includes same-filled pages. Also, when
memcgs are enabled, we use memcg_page_state(memcg, MEMCG_ZSWAPPED), which
includes same-filled pages anyway (i.e. equivalent to
zswap_stored_pages).
Use zswap_stored_pages instead in zswap_shrinker_count() to keep things
consistent whether memcgs are enabled or not, and add a comment about the
number of freeable pages possibly being scaled down more than it should if
we have lots of same-filled pages (i.e. inflated compression ratio).
Remove nr_zswap_stored and one atomic operation in the store and free
paths.
Link: https://lkml.kernel.org/r/20240322001001.1562517-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
expand() currently updates vmstat for every subpage. This is unnecessary,
since they're all of the same zone and migratetype.
Count added pages locally, then do a single vmstat update.
Link: https://lkml.kernel.org/r/20240327190111.GC7597@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
