Commit Graph

1441 Commits

Author SHA1 Message Date
Vladimir Oltean
6c24a03a61 net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.

The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):

phy_state_machine()
-> ...
   -> dsa_user_phy_read()
      -> ds->ops->phy_read()
         -> lan9303_phy_read()
            -> chip->ops->phy_read()
               -> lan9303_mdio_phy_read()
                  -> dev_get_drvdata()

But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.

The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.

Both problems have the common aspect that closing the conduit interface
solves them.

In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.

In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:

| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data.  All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.

So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.

The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.

The race condition actually did not exist when commit 0650bf52b3
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up).

Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Closes: https://lore.kernel.org/netdev/2d2e3bba17203c14a5ffdabc174e3b6bbb9ad438.camel@siemens.com/
Closes: https://lore.kernel.org/netdev/c1bf4de54e829111e0e4a70e7bd1cf523c9550ff.camel@siemens.com/
Fixes: ee534378f0 ("net: dsa: fix panic when DSA master device unbinds on shutdown")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20240913203549.3081071-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-01 09:56:36 +02:00
Pieter Van Trappen
3f464b193d net: dsa: microchip: update tag_ksz masks for KSZ9477 family
Remove magic number 7 by introducing a GENMASK macro instead.
Remove magic number 0x80 by using the BIT macro instead.

Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240909134301.75448-1-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10 17:27:56 -07:00
Alexander Lobakin
00d066a4d4 netdev_features: convert NETIF_F_LLTX to dev->lltx
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.

Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-03 11:36:43 +02:00
Jakub Kicinski
761d527d5d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/broadcom/bnxt/bnxt.h
  c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
  f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")

Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22 17:06:18 -07:00
Pieter Van Trappen
6f2b72c04d net: dsa: microchip: fix tag_ksz egress mask for KSZ8795 family
Fix the tag_ksz egress mask for DSA_TAG_PROTO_KSZ8795, the port is
encoded in the two and not three LSB. This fix is for completeness,
for example the bug doesn't manifest itself on the KSZ8794 because bit
2 seems to be always zero.

Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240813142750.772781-7-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16 10:25:02 -07:00
Vladimir Oltean
93e4649efa net: dsa: provide a software untagging function on RX for VLAN-aware bridges
Through code analysis, I realized that the ds->untag_bridge_pvid logic
is contradictory - see the newly added FIXME above the kernel-doc for
dsa_software_untag_vlan_unaware_bridge().

Moreover, for the Felix driver, I need something very similar, but which
is actually _not_ contradictory: untag the bridge PVID on RX, but for
VLAN-aware bridges. The existing logic does it for VLAN-unaware bridges.

Since I don't want to change the functionality of drivers which were
supposedly properly tested with the ds->untag_bridge_pvid flag, I have
introduced a new one: ds->untag_vlan_aware_bridge_pvid, and I have
refactored the DSA reception code into a common path for both flags.

TODO: both flags should be unified under a single ds->software_vlan_untag,
which users of both current flags should set. This is not something that
can be carried out right away. It needs very careful examination of all
drivers which make use of this functionality, since some of them
actually get this wrong in the first place.

For example, commit 9130c2d30c ("net: dsa: microchip: ksz8795: Use
software untagging on CPU port") uses this in a driver which has
ds->configure_vlan_while_not_filtering = true. The latter mechanism has
been known for many years to be broken by design:
https://lore.kernel.org/netdev/CABumfLzJmXDN_W-8Z=p9KyKUVi_HhS7o_poBkeKHS2BkAiyYpw@mail.gmail.com/
and we have the situation of 2 bugs canceling each other. There is no
private VLAN, and the port follows the PVID of the VLAN-unaware bridge.
So, it's kinda ok for that driver to use the ds->untag_bridge_pvid
mechanism, in a broken way.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16 09:59:32 +01:00
Vladimir Oltean
67c3ca2c5c net: mscc: ocelot: use ocelot_xmit_get_vlan_info() also for FDMA and register injection
Problem description
-------------------

On an NXP LS1028A (felix DSA driver) with the following configuration:

- ocelot-8021q tagging protocol
- VLAN-aware bridge (with STP) spanning at least swp0 and swp1
- 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700
- ptp4l on swp0.700 and swp1.700

we see that the ptp4l instances do not see each other's traffic,
and they all go to the grand master state due to the
ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition.

Jumping to the conclusion for the impatient
-------------------------------------------

There is a zero-day bug in the ocelot switchdev driver in the way it
handles VLAN-tagged packet injection. The correct logic already exists in
the source code, in function ocelot_xmit_get_vlan_info() added by commit
5ca721c54d ("net: dsa: tag_ocelot: set the classified VLAN during xmit").
But it is used only for normal NPI-based injection with the DSA "ocelot"
tagging protocol. The other injection code paths (register-based and
FDMA-based) roll their own wrong logic. This affects and was noticed on
the DSA "ocelot-8021q" protocol because it uses register-based injection.

By moving ocelot_xmit_get_vlan_info() to a place that's common for both
the DSA tagger and the ocelot switch library, it can also be called from
ocelot_port_inject_frame() in ocelot.c.

We need to touch the lines with ocelot_ifh_port_set()'s prototype
anyway, so let's rename it to something clearer regarding what it does,
and add a kernel-doc. ocelot_ifh_set_basic() should do.

Investigation notes
-------------------

Debugging reveals that PTP event (aka those carrying timestamps, like
Sync) frames injected into swp0.700 (but also swp1.700) hit the wire
with two VLAN tags:

00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc
                                              ~~~~~~~~~~~
00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00
          ~~~~~~~~~~~
00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03
00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00
00000040: 00 00

The second (unexpected) VLAN tag makes felix_check_xtr_pkt() ->
ptp_classify_raw() fail to see these as PTP packets at the link
partner's receiving end, and return PTP_CLASS_NONE (because the BPF
classifier is not written to expect 2 VLAN tags).

The reason why packets have 2 VLAN tags is because the transmission
code treats VLAN incorrectly.

Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX
feature. Therefore, at xmit time, all VLANs should be in the skb head,
and none should be in the hwaccel area. This is done by:

static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb,
					  netdev_features_t features)
{
	if (skb_vlan_tag_present(skb) &&
	    !vlan_hw_offload_capable(features, skb->vlan_proto))
		skb = __vlan_hwaccel_push_inside(skb);
	return skb;
}

But ocelot_port_inject_frame() handles things incorrectly:

	ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb));

void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op)
{
	(...)
	if (vlan_tag)
		ocelot_ifh_set_vlan_tci(ifh, vlan_tag);
	(...)
}

The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head
is by calling:

static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb)
{
	skb->vlan_present = 0;
}

which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get().
This means that ocelot, when it calls skb_vlan_tag_get(), sees
(and uses) a residual skb->vlan_tci, while the same VLAN tag is
_already_ in the skb head.

The trivial fix for double VLAN headers is to replace the content of
ocelot_ifh_port_set() with:

	if (skb_vlan_tag_present(skb))
		ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb));

but this would not be correct either, because, as mentioned,
vlan_hw_offload_capable() is false for us, so we'd be inserting dead
code and we'd always transmit packets with VID=0 in the injection frame
header.

I can't actually test the ocelot switchdev driver and rely exclusively
on code inspection, but I don't think traffic from 8021q uppers has ever
been injected properly, and not double-tagged. Thus I'm blaming the
introduction of VLAN fields in the injection header - early driver code.

As hinted at in the early conclusion, what we _want_ to happen for
VLAN transmission was already described once in commit 5ca721c54d
("net: dsa: tag_ocelot: set the classified VLAN during xmit").

ocelot_xmit_get_vlan_info() intends to ensure that if the port through
which we're transmitting is under a VLAN-aware bridge, the outer VLAN
tag from the skb head is stripped from there and inserted into the
injection frame header (so that the packet is processed in hardware
through that actual VLAN). And in all other cases, the packet is sent
with VID=0 in the injection frame header, since the port is VLAN-unaware
and has logic to strip this VID on egress (making it invisible to the
wire).

Fixes: 08d02364b1 ("net: mscc: fix the injection header")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16 09:59:32 +01:00
Jakub Kicinski
30b3560050 Merge branch 'net-make-timestamping-selectable'
First part of "net: Make timestamping selectable" from Kory Maincent.
Change the driver-facing type already to lower rebasing pain.

Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 08:02:30 -07:00
Kory Maincent
2111375b85 net: Add struct kernel_ethtool_ts_info
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.

Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.

Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 08:02:26 -07:00
Pawel Dembicki
85aabd1fe9 net: dsa: prepare 'dsa_tag_8021q_bridge_join' for standalone use
The 'dsa_tag_8021q_bridge_join' could be used as a generic implementation
of the 'ds->ops->port_bridge_join()' function. However, it is necessary
to synchronize their arguments.

This patch also moves the 'tx_fwd_offload' flag configuration line into
'dsa_tag_8021q_bridge_join' body. Currently, every (sja1105) driver sets
it, and the future vsc73xx implementation will also need it for
simplification.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-11-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 06:55:16 -07:00
Pawel Dembicki
6c87e1a479 net: dsa: vsc73xx: introduce tag 8021q for vsc73xx
This commit introduces a new tagger based on 802.1q tagging.
It's designed for the vsc73xx driver. The VSC73xx family doesn't have
any tag support for the RGMII port, but it could be based on VLANs.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240713211620.1125910-8-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 06:55:15 -07:00
Vladimir Oltean
d124cf54df net: dsa: tag_sja1105: refactor skb->dev assignment to dsa_tag_8021q_find_user()
A new tagging protocol implementation based on tag_8021q is on the
horizon, and it appears that it also has to open-code the complicated
logic of finding a source port based on a VLAN header.

Create a single dsa_tag_8021q_find_user() and make sja1105 call it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240713211620.1125910-7-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 06:55:15 -07:00
Vladimir Oltean
823e5cc141 net: dsa: tag_sja1105: prefer precise source port info on SJA1110 too
Now that dsa_8021q_rcv() handles better the case where we don't
overwrite the precise source information if it comes from an external
(non-tag_8021q) source, we can now unify the call sequence between
sja1105_rcv() and sja1110_rcv().

This is a preparatory change for creating a higher-level wrapper for the
entire sequence which will live in tag_8021q.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-6-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 06:55:15 -07:00
Vladimir Oltean
0064b863ab net: dsa: tag_sja1105: absorb entire sja1105_vlan_rcv() into dsa_8021q_rcv()
tag_sja1105 has a wrapper over dsa_8021q_rcv(): sja1105_vlan_rcv(),
which determines whether the packet came from a bridge with
vlan_filtering=1 (the case resolved via
dsa_find_designated_bridge_port_by_vid()), or if it contains a tag_8021q
header.

Looking at a new tagger implementation for vsc73xx, based also on
tag_8021q, it is becoming clear that the logic is needed there as well.
So instead of forcing each tagger to wrap around dsa_8021q_rcv(), let's
merge the logic into the core.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-5-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 06:55:15 -07:00
Vladimir Oltean
dcfe767378 net: dsa: tag_sja1105: absorb logic for not overwriting precise info into dsa_8021q_rcv()
In both sja1105_rcv() and sja1110_rcv(), we may have precise source port
information coming from parallel hardware mechanisms, in addition to the
tag_8021q header.

Only sja1105_rcv() has extra logic to not overwrite that precise info
with what's present in the VLAN tag. This is because sja1110_rcv() gets
by, by having a reversed set of checks when assigning skb->dev. When the
source port is imprecise (vbid >=1), source_port and switch_id will be
set to zeroes by dsa_8021q_rcv(), which might be problematic. But by
checking for vbid >= 1 first, sja1110_rcv() fends that off.

We would like to make more code common between sja1105_rcv() and
sja1110_rcv(), and for that, we need to make sure that sja1110_rcv()
also goes through the precise source port preservation logic.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-4-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15 06:55:15 -07:00
Chris Packham
983e44f0ee net: dsa: Fix typo in NET_DSA_TAG_RTL4_A Kconfig
Fix a minor typo in the help text for the NET_DSA_TAG_RTL4_A config
option.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20240607020843.1380735-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-11 19:24:11 -07:00
Marek Behún
eef8e906ae net: dsa: update the unicast MAC address when changing conduit
When changing DSA user interface conduit while the user interface is up,
DSA exhibits different behavior in comparison to when the interface is
down. This different behavior concerns the primary unicast MAC address
stored in the port standalone FDB and in the conduit device UC database.

If we put a switch port down while changing the conduit with
  ip link set sw0p0 down
  ip link set sw0p0 type dsa conduit conduit1
  ip link set sw0p0 up
we delete the address in dsa_user_close() and install the (possibly
different) address in dsa_user_open().

But when changing the conduit on the fly, the old address is not
deleted and the new one is not installed.

Since we explicitly want to support live-changing the conduit, uninstall
the old address before calling dsa_port_assign_conduit() and install the
(possibly different) new address after the call.

Because conduit change might also trigger address change (the user
interface is supposed to inherit the conduit interface MAC address if no
address is defined in hardware (dp->mac is a zero address)), move the
eth_hw_addr_inherit() call from dsa_user_change_conduit() to
dsa_port_change_conduit(), just before installing the new address.

Although this is in theory a flaw in DSA core, it needs not be
backported, since there is currently no DSA driver that can be affected
by this. The only DSA driver that supports changing conduit is felix,
and, as explained by Vladimir Oltean [1]:

  There are 2 reasons why with felix the bug does not manifest itself.

  First is because both the 'ocelot' and the alternate 'ocelot-8021q'
  tagging protocols have the 'promisc_on_conduit = true' flag. So the
  unicast address doesn't have to be in the conduit's RX filter -
  neither the old or the new conduit.

  Second, dsa_user_host_uc_install() theoretically leaves behind host
  FDB entries installed towards the wrong (old) CPU port. But in
  felix_fdb_add(), we treat any FDB entry requested towards any CPU port
  as if it was a multicast FDB entry programmed towards _all_ CPU ports.
  For that reason, it is installed towards the port mask of the PGID_CPU
  port group ID:

	if (dsa_port_is_cpu(dp))
		port = PGID_CPU;

Therefore no Fixes tag for this change.

[1] https://lore.kernel.org/netdev/20240507201827.47suw4fwcjrbungy@skbuf/
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-10 13:48:06 +01:00
Marek Behún
77f7541248 net: dsa: deduplicate code adding / deleting the port address to fdb
The sequence
  if (dsa_switch_supports_uc_filtering(ds))
    dsa_port_standalone_host_fdb_add(dp, addr, 0);
  if (!ether_addr_equal(addr, conduit->dev_addr))
    dev_uc_add(conduit, addr);
is executed both in dsa_user_open() and dsa_user_set_mac_addr().

Its reverse is executed both in dsa_user_close() and
dsa_user_set_mac_addr().

Refactor these sequences into new functions dsa_user_host_uc_install()
and dsa_user_host_uc_uninstall().

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-10 13:48:06 +01:00
Russell King (Oracle)
bbb31b7ae1 net: dsa: remove mac_prepare()/mac_finish() shims
No DSA driver makes use of the mac_prepare()/mac_finish() shimmed
operations anymore, so we can remove these.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1sByNx-00ELW1-Vp@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29 18:41:15 -07:00
Steven Rostedt (Google)
2c92ca849f tracing/treewide: Remove second parameter of __assign_str()
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.

This means that with:

  __string(field, mystring)

Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.

There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:

  git grep -l __assign_str | while read a ; do
      sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
      mv /tmp/test-file $a;
  done

I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.

Note, the same updates will need to be done for:

  __assign_str_len()
  __assign_rel_str()
  __assign_rel_str_len()

I tested this with both an allmodconfig and an allyesconfig (build only for both).

[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/

Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>	# xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-22 20:14:47 -04:00
Oleksij Rempel
5f5109af47 net: dsa: add support switches global DSCP priority mapping
Some switches like Microchip KSZ variants do not support per port DSCP
priority configuration. Instead there is a global DSCP mapping table.

To handle it, we will accept set/del request to any of user ports to
make global configuration and update dcb app entries for all other
ports.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-08 10:35:10 +01:00
Oleksij Rempel
96c6f33795 net: dsa: add support for DCB get/set apptrust configuration
Add DCB support to get/set trust configuration for different packet
priority information sources. Some switch allow to chose different
source of packet priority classification. For example on KSZ switches it
is possible to configure VLAN PCP and/or DSCP sources.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-08 10:35:09 +01:00
Eric Dumazet
1eb2cded45 net: annotate writes on dev->mtu from ndo_change_mtu()
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")

We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.

It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07 16:19:14 -07:00
Florian Fainelli
8a021a863a net: dsa: Remove adjust_link paths
Now that we no longer any drivers using PHYLIB's adjust_link callback,
remove all paths that made use of adjust_link as well as the associated
functions.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240430164816.2400606-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-01 19:06:32 -07:00
Mateusz Polchlopek
5625ca5640 devlink: extend devlink_param *set pointer
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.

Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22 13:05:19 -07:00
Russell King (Oracle)
a788fafff5 net: dsa: convert dsa_user_phylink_fixed_state() to use dsa_phylink_to_port()
Convert dsa_user_phylink_fixed_state() to use the newly introduced
dsa_phylink_to_port() helper.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-15 10:48:41 +01:00
Russell King (Oracle)
cae425cb43 net: dsa: allow DSA switch drivers to provide their own phylink mac ops
Rather than having a shim for each and every phylink MAC operation,
allow DSA switch drivers to provide their own ops structure. When a
DSA driver provides the phylink MAC operations, the shimmed ops must
not be provided, so fail an attempt to register a switch with both
the phylink_mac_ops in struct dsa_switch and the phylink_mac_*
operations populated in dsa_switch_ops populated.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rudqF-006K9H-Cc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11 20:01:14 -07:00
Russell King (Oracle)
dd0c9855b4 net: dsa: introduce dsa_phylink_to_port()
We convert from a phylink_config struct to a dsa_port struct in many
places, let's provide a helper for this.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1rudqA-006K9B-85@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11 20:01:14 -07:00
Florian Fainelli
4f6473ad60 net: dsa: Leverage core stats allocator
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core
and convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the DSA user network device code and leverage
the network core allocation instead.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240306200416.2973179-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07 20:37:13 -08:00
Eric Dumazet
e353ea9ce4 rtnetlink: prepare nla_put_iflink() to run under RCU
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.

This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26 11:46:12 +00:00
Ricardo B. Marliere
7e0acba3b4 net: dsa: constify the struct device_type usage
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the dsa_type
variable to be a constant structure as well, placing it into read-only
memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21 09:45:22 +00:00
Arınç ÜNAL
ae94dc25fd net: dsa: remove OF-based MDIO bus registration from DSA core
The code block under the "!ds->user_mii_bus && ds->ops->phy_read" check
under dsa_switch_setup() populates ds->user_mii_bus. The use of
ds->user_mii_bus is inappropriate when the MDIO bus of the switch is
described on the device tree [1].

For this reason, use this code block only for switches [with MDIO bus]
probed on platform_data, and OF which the switch MDIO bus isn't described
on the device tree. Therefore, remove OF-based MDIO bus registration as
it's useless for these cases.

These subdrivers which control switches [with MDIO bus] probed on OF, will
lose the ability to register the MDIO bus OF-based:

drivers/net/dsa/b53/b53_common.c
drivers/net/dsa/lan9303-core.c
drivers/net/dsa/vitesse-vsc73xx-core.c

These subdrivers let the DSA core driver register the bus:
- ds->ops->phy_read() and ds->ops->phy_write() are present.
- ds->user_mii_bus is not populated.

The commit fe7324b932 ("net: dsa: OF-ware slave_mii_bus") which brought
OF-based MDIO bus registration on the DSA core driver is reasonably recent
and, in this time frame, there have been no device trees in the Linux
repository that started describing the MDIO bus, or dt-bindings defining
the MDIO bus for the switches these subdrivers control. So I don't expect
any devices to be affected.

The logic we encourage is that all subdrivers should register the switch
MDIO bus on their own [2]. And, for subdrivers which control switches [with
MDIO bus] probed on OF, this logic must be followed to support all cases
properly:

No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if "interrupt-controller" is defined at
the switch node. This case should only be covered for the switches which
their dt-bindings documentation didn't document the MDIO bus from the
start. This is to keep supporting the device trees that do not describe the
MDIO bus on the device tree but the MDIO bus is being used nonetheless.

Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO
bus, set the interrupts for PHYs if ["interrupt-controller" is defined at
the switch node and "interrupts" is defined at the PHY nodes under the
switch MDIO bus node].

Switch MDIO bus defined but explicitly disabled: If the device tree says
status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all.
Instead, just exit as early as possible and do not call any MDIO API.

After all subdrivers that control switches with MDIO buses are made to
register the MDIO buses on their own, we will be able to get rid of
dsa_switch_ops :: phy_read() and :: phy_write(), and the code block for
registering the MDIO bus on the DSA core driver.

Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1]
Link: https://lore.kernel.org/netdev/20240103184459.dcbh57wdnlox6w7d@skbuf/ [2]
Suggested-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240213-for-netnext-dsa-mdio-bus-v2-1-0ff6f4823a9e@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-15 21:30:02 -08:00
Vladimir Oltean
36f75f74dc net: dsa: tag_sja1105: remove "inline" keyword
The convention is to not use the "inline" keyword for functions in C
files, but to let the compiler choose.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206112927.4134375-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:03:57 -08:00
Vladimir Oltean
83acbb9d07 net: dsa: remove "inline" from dsa_user_netpoll_send_skb()
The convention is to not use "inline" functions in C files, and let the
compiler decide whether to inline or not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206112927.4134375-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08 19:03:57 -08:00
Vladimir Oltean
0cd216d769 net: dsa: reindent arguments of dsa_user_vlan_for_each()
These got misaligned after commit 6ca80638b9 ("net: dsa: Use conduit
and user terms").

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05 12:37:06 +00:00
Heiner Kallweit
d80a523353 ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel side
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31 12:30:47 +00:00
Vladimir Oltean
844f104790 net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events
After the blamed commit, we started doing this dereference for every
NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system.

static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev)
{
	struct dsa_user_priv *p = netdev_priv(dev);

	return p->dp;
}

Which is obviously bogus, because not all net_devices have a netdev_priv()
of type struct dsa_user_priv. But struct dsa_user_priv is fairly small,
and p->dp means dereferencing 8 bytes starting with offset 16. Most
drivers allocate that much private memory anyway, making our access not
fault, and we discard the bogus data quickly afterwards, so this wasn't
caught.

But the dummy interface is somewhat special in that it calls
alloc_netdev() with a priv size of 0. So every netdev_priv() dereference
is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event
with a VLAN as its new upper:

$ ip link add dummy1 type dummy
$ ip link add link dummy1 name dummy1.100 type vlan id 100
[   43.309174] ==================================================================
[   43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8
[   43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374
[   43.330058]
[   43.342436] Call trace:
[   43.366542]  dsa_user_prechangeupper+0x30/0xe8
[   43.371024]  dsa_user_netdevice_event+0xb38/0xee8
[   43.375768]  notifier_call_chain+0xa4/0x210
[   43.379985]  raw_notifier_call_chain+0x24/0x38
[   43.384464]  __netdev_upper_dev_link+0x3ec/0x5d8
[   43.389120]  netdev_upper_dev_link+0x70/0xa8
[   43.393424]  register_vlan_dev+0x1bc/0x310
[   43.397554]  vlan_newlink+0x210/0x248
[   43.401247]  rtnl_newlink+0x9fc/0xe30
[   43.404942]  rtnetlink_rcv_msg+0x378/0x580

Avoid the kernel oops by dereferencing after the type check, as customary.

Fixes: 4c3f80d22b ("net: dsa: walk through all changeupper notifier functions")
Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-11 16:33:52 -08:00
Jakub Kicinski
0ed6e95255 net: fill in MODULE_DESCRIPTION()s for DSA tags
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the DSA tag modules.

The descriptions are copy/pasted Kconfig names, with s/^Tag/DSA tag/.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240104143759.1318137-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05 08:06:19 -08:00
Radu Pirea (NXP OSS)
90abde49ea net: rename dsa_realloc_skb to skb_ensure_writable_head_tail
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27 13:08:09 +00:00
Florian Fainelli
8fedaaca40 net: dsa: tag_rtl4_a: Use existing ETH_P_REALTEK constant
No functional change, uses the existing ETH_P_REALTEK constant already
defined in if_ether.h.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231113165030.2440083-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14 19:45:35 -08:00
Florian Fainelli
87cd83714f net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT
This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24 13:08:14 -07:00
Florian Fainelli
6ca80638b9 net: dsa: Use conduit and user terms
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24 13:08:14 -07:00
Russell King (Oracle)
63b9f7a19f net: dsa: remove dsa_port_phylink_validate()
As all drivers now provide phylink capabilities (including MAC), the
if() condition in dsa_port_phylink_validate() will always be true. We
will always use the generic validator, which phylink will call itself
if the .validate method isn't populated. Thus, there is now no need to
implement the .validate method, so this implementation can be removed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11 10:06:05 +01:00
Lukasz Majewski
5e5db71a92 net: dsa: tag_ksz: Extend ksz9477_xmit() for HSR frame duplication
The KSZ9477 has support for HSR (High-Availability Seamless Redundancy).
One of its offloading (i.e. performed in the switch IC hardware) features
is to duplicate received frame to both HSR aware switch ports.

To achieve this goal - the tail TAG needs to be modified. To be more
specific, both ports must be marked as destination (egress) ones.

The NETIF_F_HW_HSR_DUP flag indicates that the device supports HSR and
assures (in HSR core code) that frame is sent only once from HOST to
switch with tail tag indicating both ports.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03 13:51:02 +02:00
Vladimir Oltean
6715042cd1 net: dsa: notify drivers of MAC address changes on user ports
In some cases, drivers may need to veto the changing of a MAC address on
a user port. Such is the case with KSZ9477 when it offloads a HSR device,
because it programs the MAC address of multiple ports to a shared
hardware register. Those ports need to have equal MAC addresses for the
lifetime of the HSR offload.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03 13:51:02 +02:00
Vladimir Oltean
fefe5dc4af net: dsa: propagate extack to ds->ops->port_hsr_join()
Drivers can provide meaningful error messages which state a reason why
they can't perform an offload, and dsa_slave_changeupper() already has
the infrastructure to propagate these over netlink rather than printing
to the kernel log. So pass the extack argument and modify the xrs700x
driver's port_hsr_join() prototype.

Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases
from xrs700x_hsr_join().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03 13:51:02 +02:00
Russell King (Oracle)
145622771d net: dsa: mark parsed interface mode for legacy switch drivers
If we successfully parsed an interface mode with a legacy switch
driver, populate that mode into phylink's supported interfaces rather
than defaulting to the internal and gmii interfaces.

This hasn't caused an issue so far, because when the interface doesn't
match a supported one, phylink_validate() doesn't clear the supported
mask, but instead returns -EINVAL. phylink_parse_fixedlink() doesn't
check this return value, and merely relies on the supported ethtool
link modes mask being cleared. Therefore, the fixed link settings end
up being allowed despite validation failing.

Before this causes a problem, arrange for DSA to more accurately
populate phylink's supported interfaces mask so validation can
correctly succeed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1qTKdM-003Cpx-Eh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09 13:08:09 -07:00
Jakub Kicinski
35b1b1fd96 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

Conflicts:

net/dsa/port.c
  9945c1fb03 ("net: dsa: fix older DSA drivers using phylink")
  a88dd75384 ("net: dsa: remove legacy_pre_march2020 detection")
https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/

net/xdp/xsk.c
  3c5b4d69c3 ("net: annotate data-races around sk->sk_mark")
  b7f72a30e9 ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  37b61cda9c ("bnxt: don't handle XDP in netpoll")
  2b56b3d992 ("eth: bnxt: handle invalid Tx completions more gracefully")
https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/

Adjacent changes:

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
  62da08331f ("net/mlx5e: Set proper IPsec source port in L4 selector")
  fbd517549c ("net/mlx5e: Add function to get IPsec offload namespace")

drivers/net/ethernet/sfc/selftest.c
  55c1528f9b ("sfc: fix field-spanning memcpy in selftest")
  ae9d445cd4 ("sfc: Miscellaneous comment removals")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03 14:34:37 -07:00
Christian Marangi
de9db136dc net: dsa: tag_qca: return early if dev is not found
Currently checksum is recalculated and dsa tag stripped even if we later
don't find the dev.

To improve code, exit early if we don't find the dev and skip additional
operation on the skb since it will be freed anyway.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230730074113.21889-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-01 12:02:42 +02:00
Russell King (Oracle)
9945c1fb03 net: dsa: fix older DSA drivers using phylink
Older DSA drivers that do not provide an dsa_ops adjust_link method end
up using phylink. Unfortunately, a recent phylink change that requires
its supported_interfaces bitmap to be filled breaks these drivers
because the bitmap remains empty.

Rather than fixing each driver individually, fix it in the core code so
we have a sensible set of defaults.

Reported-by: Sergei Antonov <saproj@gmail.com>
Fixes: de5c9bf40c ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com> # dsa_loop
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qOflM-001AEz-D3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27 17:19:46 -07:00