Commit Graph

83 Commits

Author SHA1 Message Date
Mark Brown
443e67ed8d mfd: Correct revision display for WM1811 revision D
As WM1811 revision C was transparent to software the revision IDs for
subsequent revisions are one less than they would normally be. Correct
for this in log messages.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:11:24 +08:00
Mark Brown
346978980a mfd: Initialise WM8994 register cache after reading chip ID registers
The different devices handled by the WM8994 can be distinguished using
their ID registers so we don't need to rely on the user having registered
the device correctly. Instead do the initial regmap setup with a minimal
configuration only supporting physical I/O and then configure the cache
once we have identified the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:11:13 +08:00
Mark Brown
c3f1386171 mfd: Enable register cache for wm8994 devices
As part of this we provide information about the registers that exist in
the device to the regmap core, drop the small amount of cache that the
core had been using and let regmap do the sync.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:11:05 +08:00
Mark Brown
be79cf2fd2 mfd: Don't hard code the reset value for WM8994 devices
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:10:01 +08:00
Mark Brown
26c34c25e5 mfd: Disable more pulls on WM8994
Disable more pulls by default on WM8994 for a small current saving. Since
some designs do leave SPKMODE floating provide platform data to allow that
to be left enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:09:34 +08:00
Mark Brown
2fa3349467 mfd: Convert wm8994 to devm_kzalloc()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:09:29 +08:00
Mark Brown
cf763c2e60 mfd: Add basic device tree binding for wm8994
Add a placeholder device tree binding for the wm8994 driver. At present
the binding is essentially null as none of the platform data is supported,
and at least some of that will depend on the pending regulator bindings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13 00:09:11 +08:00
Linus Torvalds
a0a4194c94 Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6
* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits)
  mfd: Fix missing abx500 header file updates
  mfd: Add missing <linux/io.h> include to intel_msic
  x86, mrst: add platform support for MSIC MFD driver
  mfd: Expose TurnOnStatus in ab8500 sysfs
  mfd: Remove support for early drop ab8500 chip
  mfd: Add support for ab8500 v3.3
  mfd: Add ab8500 interrupt disable hook
  mfd: Convert db8500-prcmu panic() into pr_crit()
  mfd: Refactor db8500-prcmu request_clock() function
  mfd: Rename db8500-prcmu init function
  mfd: Fix db5500-prcmu defines
  mfd: db8500-prcmu voltage domain consumers additions
  mfd: db8500-prcmu reset code retrieval
  mfd: db8500-prcmu tweak for modem wakeup
  mfd: Add db8500-pcmu watchdog accessor functions for watchdog
  mfd: hwacc power state db8500-prcmu accessor
  mfd: Add db8500-prcmu accessors for PLL and SGA clock
  mfd: Move to the new db500 PRCMU API
  mfd: Create a common interface for dbx500 PRCMU drivers
  mfd: Initialize DB8500 PRCMU regs
  ...

Fix up trivial conflicts in
	arch/arm/mach-imx/mach-mx31moboard.c
	arch/arm/mach-omap2/board-omap3beagle.c
	arch/arm/mach-u300/include/mach/irqs.h
	drivers/mfd/wm831x-spi.c
2011-11-03 09:40:51 -07:00
Linus Torvalds
68d99b2c8e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits)
  ALSA: hda - Fix ADC input-amp handling for Cx20549 codec
  ALSA: hda - Keep EAPD turned on for old Conexant chips
  ALSA: hda/realtek - Fix missing volume controls with ALC260
  ASoC: wm8940: Properly set codec->dapm.bias_level
  ALSA: hda - Fix pin-config for ASUS W90V
  ALSA: hda - Fix surround/CLFE headphone and speaker pins order
  ALSA: hda - Fix typo
  ALSA: Update the sound git tree URL
  ALSA: HDA: Add new revision for ALC662
  ASoC: max98095: Convert codec->hw_write to snd_soc_write
  ASoC: keep pointer to resource so it can be freed
  ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls
  ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2
  ASoC: da7210: Add support for line out and DAC
  ASoC: da7210: Add support for DAPM
  ALSA: hda/realtek - Fix DAC assignments of multiple speakers
  ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value
  ASoC: Set sgtl5000->ldo in ldo_regulator_register
  ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture
  ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture
  ...
2011-10-28 14:25:01 -07:00
Mark Brown
5f40c6b650 mfd: Add more checks for WM8994 being active during suspend
Enhancements to the WM8994 audio driver and new features on more modern
devices in the series mean that we can no longer rely on VMID being active
as an indication that the device is active. Add further checks for digital
paths and microphone detection.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24 14:09:10 +02:00
Mark Brown
881de67046 mfd: Allow WM8994 LDO enable pulls to be disabled
In systems where the LDO enables are always driven (for example, being
connected to an always on supply rail or a GPIO which is driven by the
CPU even in suspend) then we can disable the pull downs on the LDO for
a small power savings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24 14:09:10 +02:00
Mark Brown
b1f43bf3a5 mfd: Add WM1811 support
The WM1811 is mostly register compatible with the WM8994 and WM8958,
providing a high performance audio hub CODEC in a small form factor
suitable for ultra compact system designs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-04 11:59:02 +01:00
Mark Brown
d6c645fc00 mfd: Convert WM8994 to use new register map API
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-22 12:25:15 +01:00
Mark Brown
f85dbda076 mfd: Fix error handling if BUG() isn't enabled in WM8994
Even if we would've BUG()ed we should still tidy up after ourselves if that
isn't enabled in the kernel config.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Mark Brown
98ae1ccaf6 mfd: Fix WM8994 IRQ register cache restore on resume
When the byte swap was factored out into the per-register I/O functions
the register restore for the IRQ mask cache (which we use and store in
CPU native format for the interrupt handler) was not updated to do a byte
swap when it uses the bulk I/O. Fix this by writing the cache out one
register at a time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:21 +02:00
Mark Brown
a2495bc727 mfd: Restructure wm8994-core device revision handling
Switch on the device type before revision since anything we do here will
be device as well as revision specific.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31 23:28:20 +02:00
Mark Brown
316b6cc081 mfd: Push byte swaps out of wm8994 bulk read path
For consistency with the write path push byte swaps of the WM8994 register
data out of the bulk read data path into the per-register APIs. The only
user of the bulk register read is the interrupt code which is updated to
do the swaps itself part of this patch.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:11 +01:00
Mark Brown
07e73fbb2d mfd: Constify WM8994 write path
Allow const buffers to be passed in without type safety issues.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:11 +01:00
Mark Brown
4277163c2a mfd: Push byte swap out of WM8994 bulk I/O
For bulk I/O it is both convenient and more sensible to pre-swap the data
rather than doing the swap as part of the I/O operation so move the byte
swaps we're currently doing into the core write function into the register
based functions, giving the bulk write function a straight pass through
to the chip.

This leaves reads inconsistent, this will be addressed as a followup patch.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:10 +01:00
Mark Brown
334e9ab8f9 mfd: Avoid copying data in WM8994 I2C write
As well as providing a trivial performance optimisation this also avoids
allocating a copy of the message on the stack which is beneficial when
doing large transfers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:10 +01:00
Mark Brown
aad343107b mfd: Staticise WM8994 PM ops
They're not exported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:09 +01:00
Mark Brown
e93c53870c mfd: Add WM8994 bulk register write operation
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:07 +01:00
Mark Brown
f40dff9edb mfd: Put WM8994 into reset when suspending
Ensure that the chip is in the lowest power mode possible when suspended
by performing a soft reset on it. On early silicon revisions the lowest
power modes can't be entered without using reset so we can't achieve
equivalent results within the individual drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:49 +01:00
Mark Brown
77bd70e900 mfd: Don't suspend WM8994 if the CODEC is not suspended
ASoC supports keeping the audio subsysetm active over suspend in order
to support use cases such as audio passthrough from a cellular modem
with the main CPU suspended. Ensure that we don't power down the CODEC
when this is happening by checking to see if VMID is up and skipping
suspend and resume when it is. If the CODEC has suspended then it'll
turn VMID off before the core suspend() gets called.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-02 10:57:50 +01:00
Mark Brown
d450f19eea mfd: Implement runtime PM for WM8994 core driver
Allow the WM8994 to completely power off, including disabling the LDOs
if they are software controlled, when it goes idle. The CODEC subdevice
controls activity for the MFD as a whole.

If the GPIOs need to be used while the device is active runtime PM
should be disabled for the device by machine specific code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:37:43 +01:00
Mark Brown
559e0df6b3 mfd: Add initial WM8958 support
The WM8958 is a derivative of the WM8994 which is register compatible
with the addition of some extra features, mostly in the CODEC side.
The major change visible at the MFD level is that rather than a single
DBVDD supply we now have three separate DBVDDs so we must request and
enable a different set of supplies.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-26 15:16:19 +00:00
Axel Lin
d0a1169396 mfd: Fix incorrect kfree(i2c) in wm8994-core i2c_driver probe
The i2c_client received in probe() should not be kfree()'d.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12 11:28:14 +02:00
Axel Lin
fccbd21f33 mfd: Fix wm8994_device_init() return value
wm8994_device_init() will return 0 in the case of kzalloc fail
in current implementation.
This patch fixes the return value.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12 11:28:07 +02:00
Takashi Iwai
d71f4cece4 Merge branch 'topic/asoc' into for-linus
Conflicts:
	sound/soc/codecs/ad1938.c
2010-05-20 12:00:43 +02:00
Mark Brown
c9fbf7e070 mfd: Add WM8994 interrupt controller support
The WM8994 has an interrupt controller which supports interrupts for
both CODEC and GPIO portions of the chip. Support this using genirq,
while allowing for systems that do not have an interrupt hooked up.

Wrapper functions are provided for the IRQ request and free to simplify
the code in consumer drivers when handling cases where IRQs are not
set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2010-04-05 19:18:07 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Joonyoung Shim
7731074ab2 mfd: Fix WM8994 error handling
This patch fixes wrong goto statement for error handling on probe.

Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:19 +01:00
Mark Brown
9e50108668 mfd: Add initial WM8994 support
The WM8994 is a highly integrated ultra low power audio hub CODEC.
Since it includes on-board regulators and GPIOs it is represented
as a multi-function device, though the overwhelming majority of
the functionality is provided by the ASoC CODEC driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07 22:17:13 +01:00