Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846
After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().
Fixes: 960a581e22 ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This new Lenovo ThinkCenter has two front mics which can't be handled
by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change
the location for one of the mics.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 3c6fd1f07e ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
Since the empty codec problem appear on the certain AMD platform (PCI
ID 1022:1487), this patch changes the blacklist matching to both PCI
ID and SSID using pci_match_id(). Also, the entry that was removed by
the previous fix for ASUS ROG Zenigh II is re-added.
Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HD-audio codec driver applies a tricky procedure to forcibly perform
the runtime resume by mimicking the usage count even if the device has
been runtime-suspended beforehand. This was needed to assure to
trigger the jack detection update after the system resume.
And recently we also applied the similar logic to the HD-audio
controller side. However this seems leading to some inconsistency,
and eventually PCI controller gets screwed up.
This patch is an attempt to fix and clean up those behavior: instead
of the tricky runtime resume procedure, the existing jackpoll work is
scheduled when such a forced codec resume is required. The jackpoll
work will power up the codec, and this alone should suffice for the
jack status update in usual cases. If the extra polling is requested
(by checking codec->jackpoll_interval), the manual update is invoked
after that, and the codec is powered down again.
Also, we filter the spurious wake up of the codec from the controller
runtime resume by checking codec->relaxed_resume flag. If this flag
is set, basically we don't need to wake up explicitly, but it's
supposed to be done via the audio component notifier.
Fixes: c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not needed")
Link: https://lore.kernel.org/r/20200422203744.26299-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 3c6fd1f07e ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.
This patch reverts the corresponding entry as a temporary solution.
Although Zenith II and co will see get the empty HD-audio bus again,
it'd be merely resource wastes and won't affect the functionality,
so it's no end of the world. We'll need to address this later,
e.g. by either switching to DMI string matching or using PCI ID &
SSID pairs.
Fixes: 3c6fd1f07e ("ALSA: hda: Add driver blacklist")
Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200419071926.22683-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 1c76aa5fb4 ("ALSA: hda/realtek - Allow skipping
spec->init_amp detection") changed the way to assign spec->init_amp
field that specifies the way to initialize the amp. Along with the
change, the commit also replaced a few fixups that set spec->init_amp
in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE. This was rather
aligning to the other fixups, and not supposed to change the actual
behavior.
However, this change turned out to cause a regression on FSC S7020,
which hit exactly the above. The reason was that there is still one
place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE
call, namely in alc_ssid_check().
This patch fixes the regression by adding the proper spec->init_amp
override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED.
Fixes: 1c76aa5fb4 ("ALSA: hda/realtek - Allow skipping spec->init_amp detection")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329
Link: https://lore.kernel.org/r/20200418190639.10082-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.
For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.
Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio controller does system-suspend and resume operations by
directly calling its helpers __azx_runtime_suspend() and
__azx_runtime_resume(). However, in general, we don't have to resume
always the device fully at the system resume; typically, if a device
has been runtime-suspended, we can leave it to runtime resume.
Usually for achieving this, the driver would call
pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the
system suspend and resume ops. Unfortunately, this doesn't work for
the resume path in our case. For handling the jack detection at the
system resume, a child codec device may need the (literally) forcibly
resume even if it's been runtime-suspended, and for that, the
controller device must be also resumed even if it's been suspended.
This patch is an attempt to improve the situation. It replaces the
direct __azx_runtime_suspend()/_resume() calls with with
pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight
trick as we've done for the codec side. More exactly:
- azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and
azx_runtime_resume(), so that it can be properly executed from the
system-suspend/resume path
- The WAKEEN handling depends on the card's power state now; it's set
and cleared only for the runtime-suspend
- azx_resume() checks whether any codec may need the forcible resume
beforehand. If the forcible resume is required, it does temporary
PM refcount up/down for actually triggering the runtime resume.
- A new helper function, hda_codec_need_resume(), is introduced for
checking whether the codec needs a forcible runtime-resume, and the
existing code is rewritten with that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe. But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM. More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.
This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd-hda-intel driver handles the most of its probe task in the delayed
work (either via workqueue or via firmware loader). When an error
happens in the later delayed probe, we can't deregister the device
itself because the probe callback already returned success and the
device was bound. So, for now, we set hda->init_failed flag and make
the rest untouched until the device gets really unbound.
However, this leaves the device up running, keeping the resources
without any use that prevents other operations.
In this patch, we release the resources at first when a probe error
happens in the delayed probe stage, but keeps the top-level object, so
that the PM and other ops can still refer to the object itself.
Also for simplicity, snd_hda_intel object is allocated via devm, so
that we can get rid of the explicit kfree calls.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata. This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.
Instead, we continue the probing as if it were no option set. This is
often a better choice than the forced abort, too.
Fixes: 5cb543dba9 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Asus FX505DT with Realtek ALC233, the headset mic is connected
to pin 0x19, with default 0x411111f0.
Enable headset mic by reconfiguring the pin to an external mic
associated with the headphone on 0x21. Mic jack detection was also
found to be working.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207131
Signed-off-by: Adam Barber <barberadam995@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200410090032.2759-1-barberadam995@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.
This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry. As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo. This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.
This patch corrects the behavior to store only on the defined array
member.
Fixes: 0401e8548e ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP new platform has new mute led feature.
COEF index 0x34 bit 5 to control playback mute led.
COEF index 0x35 bit 2 and bit 3 to control Mic mute led.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The audio setup on the Lenovo Carbon X1 8th gen is the same as that on
the Lenovo Carbon X1 7th gen, as such it needs the same
ALC285_FIXUP_THINKPAD_HEADSET_JACK quirk.
This fixes volume control of the speaker not working among other things.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1820196
Cc: stable@vger.kernel.org
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20200402174311.238614-1-hdegoede@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
patch_realtek.c has historically failed to properly configure the PC
Beep Hidden Register for the ALC256 codec (among others). Depending on
your kernel version, symptoms of this misconfiguration can range from
chassis noise, picked up by a poorly-shielded PCBEEP trace, getting
amplified and played on your internal speaker and/or headphones to loud
feedback, which responds to the "Headphone Mic Boost" ALSA control,
getting played through your headphones. For details of the problem, see
the patch in this series titled "ALSA: hda/realtek - Set principled PC
Beep configuration for ALC256", which fixes the configuration.
These symptoms have been most noticed on the Dell XPS 13 9350 and 9360,
popular laptops that use the ALC256. As a result, several model-specific
fixups have been introduced to try and fix the problem, the most
egregious of which locks the "Headphone Mic Boost" control as a hack to
minimize noise from a feedback loop that shouldn't have been there in
the first place.
Now that the underlying issue has been fixed, remove all these fixups.
Remaining fixups needed by the XPS 13 are all picked up by existing pin
quirks.
This change should, for the XPS 13 9350/9360
- Significantly increase volume and audio quality on headphones
- Eliminate headphone popping on suspend/resume
- Allow "Headphone Mic Boost" to be set again, making the headphone
jack fully usable as a microphone jack too.
Fixes: 8c69729b44 ("ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3")
Fixes: 423cd78561 ("ALSA: hda - Fix headphone noise on Dell XPS 13 9360")
Fixes: e4c9fd10eb ("ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant")
Fixes: 1099f48457 ("ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/b649a00edfde150cf6eebbb4390e15e0c2deb39a.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:
In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit e3743f431143 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.
Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].
This change eliminates the update in alc256_init() and replaces it with
the 0x5757 write from alc_fill_eapd_coef(). Kailang says that 0x5757 is
supposed to be the codec's default value, so using it will make
debugging easier for Realtek.
Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.
[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst
[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.
Fixes: e1e8c1fdce ("ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bf22b417d1f2474b12011c2a39ed6cf8b06d3bf5.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On the Lenovo X1C7 machines, after we plug the headset, the rt_resume()
and rt_suspend() of the codec driver will be called periodically, the
driver can't stay in the rt_suspend state even users doen't use the
sound card.
Through debugging, I found when running rt_suspend(), it will call
alc225_shutup(), in this function, it will change 3k pull down control
by alc_update_coef_idx(codec, 0x4a, 0, 3 << 10), this will trigger a
fake key event and that event will resume the codec, when codec
suspend agin, it will trigger the fake key event one more time, this
process will repeat.
If disable the key event before changing the pull down control, it
will not trigger fake key event. It also needs to restore the pull
down control and re-enable the key event, otherwise the system can't
get key event when codec is in rt_suspend state.
Also move some functions ahead of alc225_shutup(), this can save the
function declaration.
Fixes: 76f7dec08f (ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1)
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200329082018.20486-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If SND_HDA_CODEC_CA0132 is enabled, the DSP support should be enabled as
well. Disabled DSP support leads to a hanging alsa system and no sound
output on the card otherwise. Tested on:
06:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)
Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://lore.kernel.org/r/20200329053710.4276-1-r.czerwinski@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The system in question uses ALC285, and it uses GPIO 0x04 to control its
mute LED.
The mic mute LED can be controlled by GPIO 0x01, however the system uses
DMIC so we should use that to control mic mute LED.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200327044626.29582-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I have a system which has an EVGA X99 Classified motherboard. The pin
assignments for the HD Audio controller are not correct under Linux.
Windows 10 works fine and informs me that it's using the Recon3Di
driver, and on Linux, `cat
/sys/class/sound/card0/device/subsystem_{vendor,device}` yields
0x3842
0x1038
This patch adds a corresponding entry to the quirk list.
Signed-off-by: Geoffrey Allott <geoffrey@allott.email>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a6cd56b678c00ce2db3685e4278919f2584f8244.camel@allott.email
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A headset on the laptop like ASUS B9450FA does not work, until quirk
ALC294_FIXUP_ASUS_HPE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200225072920.109199-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell desktop platform supported headset Mic.
Add pin verb to enable headset Mic.
This platform only support fixed type headset for Iphone type.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b9da28d772ef43088791b0f3675929e7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Need to chain the THINKPAD_ACPI, otherwise the mute led will not
work.
Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200219052306.24935-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some code in HD-audio driver calls snprintf() in a loop and still
expects that the return value were actually written size, while
snprintf() returns the expected would-be length instead. When the
given buffer limit were small, this leads to a buffer overflow.
Use scnprintf() for addressing those issues. It returns the actually
written size unlike snprintf().
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200218091409.27162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merging the UAC2 effect unit parser improvement. As it's based on the
previous usb-audio driver fix, it was deviated from for-next branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200211200739.GA12948@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200211194403.GA10318@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable timeout is being assigned with the value 200 that is never
read, it is assigned a new value in a following do-loop. The assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200208222756.37707-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a final step of the cleanup series: move the HDMI ELD parser
call into update_eld() function so that we can unify the calls.
The ELD validity check is unified in update_eld(), too.
Along with it, the repoll scheduling is moved to update_eld() as well,
where sync_eld_via_acomp() just passes 0 for skipping it.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For improving the readability, move the runtime PM handling code from
hdmi_present_sense() to hdmi_present_sense_via_verbs(). Now
hdmi_present_sense() became symmetric for both audio-component and
legacy cases.
Just a minor code refactoring.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current HDMI codec driver code manages the jack detection in two
different ways: for Intel codecs with audio component, the driver
creates snd_jack objects by itself while the standard hda_jack stuff
is used for the rest. This was basically because the audio component
doesn't need the pin sense reading and the unsol event handling, hence
it just needs to report the corresponding jacks directly.
It was a bit messy but not too messy until the driver got DP-MST
support for Nvidia that re-uses the part of dyn_pcm_assign feature
while keeping the pin sense and the unsol event handling. Now, for
DP-MST, we use hda_jack for pin sensing and unsol events but use the
own snd_jack objects. Meanwhile for non-DP-MST, hda_jack is used for
pin sense and unsol events, and the jacks are bound on hda_jack.
Moreover, there is a polling mode support where the unsol event isn't
used. For those, we also have special handling.
For simplifying those messes, this patch unifies the snd_jack handling
over all generic HDMI codes. The driver creates snd_jack objects just
like Intel codecs did in the past but now for all devices. For the
system without audio component binding, we still need the pin sense
and the unsol event handling, and those are still done with the
hda_jack table as before. But hda_jack is no longer used for the
actual snd_jack handling.
Since the hda_jack is no longer used for jack reporting, we removed
snd_hda_jack_report_sync() calls, which also allowed to simplify the
return type of hda_present_sense() and co. pin_idx_to_pcm_jack() was
simplified as well because it behaves same for all cases now.
Note that the hda_jack is still used for the simple HDMI codecs; they
are really simple enough, so no big reason to change intrusively.
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pass hda_jack_tbl object to hdmi_intrinsic_event() along with res from
hdmi_unsol_event() so that we can reduce the lookup of the same
hda_jack_tbl object again.
Minor code refactoring.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.
Fixes: 5af29028fd ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If dyn_pcm_assign is set, different jack objects are being created
for pcm and pins.
If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into
add_hdmi_jack_kctl() to create and track separate jack object for
pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also
need to report status change of the pcm jack.
Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update
hdmi_present_sense_via_verbs() to report plug state of pcm jack
object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm
jack's plug state must be consistent with plug state
of pin's jack.
Fixes: 5398e94fb7 ("ALSA: hda - Add DP-MST support for NVIDIA codecs")
Reported-and-tested-by: Martin Regner <martin@larkos.de>
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200204102746.1356-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo Thinkpad T420s uses the same codec as T420, so apply the
same quirk to enable audio output on a docking station.
Signed-off-by: Peter Große <pegro@friiks.de>
Link: https://lore.kernel.org/r/20200122180106.9351-1-pegro@friiks.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial snd_hda_get_sub_node() can fail on certain
devices (e.g. some Chromebook models using Intel GLK).
The failure rate is very low, but as this is is part of
the probe process, end-user impact is high.
In observed cases, related hardware status registers have
expected values, but the node query still fails. Retrying
the node query does seem to help, so fix the problem by
adding retry logic to the query. This does not impact
non-Intel platforms.
BugLink: https://github.com/thesofproject/linux/issues/1642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200120160117.29130-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that the recent simplification of HD-audio bus access
helpers caused a regression on the virtual HD-audio device on QEMU
with ARM platforms. The driver got a CORB/RIRB timeout and couldn't
probe any codecs.
The essential difference that caused a problem was the enforced
aligned MMIO accesses by simplification. Since snd-hda-tegra driver
is enabled on ARM, it enables CONFIG_SND_HDA_ALIGNED_MMIO, which makes
the all HD-audio drivers using the aligned MMIO accesses. While this
is mandatory for snd-hda-tegra, it seems that snd-hda-intel on ARM
gets broken by this access pattern.
For addressing the regression, this patch introduces a new flag,
aligned_mmio, to hdac_bus object, and applies the aligned MMIO only
when this flag is set. This change affects only platforms with
CONFIG_SND_HDA_ALIGNED_MMIO set, i.e. mostly only for ARM platforms.
Unfortunately the patch became a big bigger than it should be, just
because the former calls didn't take hdac_bus object in the argument,
hence we had to extend the call patterns.
Fixes: 19abfefd4c ("ALSA: hda: Direct MMIO accesses")
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1161152
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200120104127.28985-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AD HD-audio codec driver has a few code lines invoking
snd_get_num_conns() and using its return value as the array index
without checking. This is basically safe in all those places; at the
second and later calls snd_get_num_conns() returns the value cached
from the first invocation, hence the value is always consistent.
However, it looks a bit confusing as if a lack of the proper check.
This patch introduces a new field num_smux_conns in ad198x_spec for
simplifying the code. Now we store and refer to the value more
locally without invoking the extra function at each time.
Reported-by: Colin King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200115100035.22511-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
make W=1 reports the following warnings, fix as suggested
sound/pci/hda/patch_hdmi.c: In function ‘hdmi_non_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:824:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
824 | ;
| ^
sound/pci/hda/patch_hdmi.c:826:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
826 | ;
| ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113211405.28070-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got quite a few bug reports showing the SOF driver being loaded
unintentionally recently, and the reason seems to be that users didn't
know the module option change: with the recent kernel, a new option
dsp_driver=1 has to be passed to a new module snd-intel-dspcfg
instead of snd_hda_intel.dmic_detect=0 option.
That is, actually there are two tricky things here:
- We changed the whole detection in another module and another
option semantics.
- The existing option for skipping the DSP probe was also renamed.
For avoiding the confusion and giving user more hint, this patch
reverts the renamed option dsp_driver back to dmic_detect for
snd-hda-intel module, and show the warning about the module option
change when the non-default value is passed.
Fixes: 82d9d54a6c ("ALSA: hda: add Intel DSP configuration / probe code")
Link: https://lore.kernel.org/r/20200109082000.26729-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup
applied for X1 Carbon 7th gen in commit d2cd795c4e ("ALSA: hda -
fixup for the bass speaker on Lenovo Carbon X1 7th gen").
Signed-off-by: Kailang Yang <kailang@realtek.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set EAPD control to verb control.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining possible places: the string
tables, the rate tables, the verb tables, the index tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell E7xx laptops have also mic mute LED that is driven by the
dell-laptop platform driver. Bind it with the capture control as
already done for other models.
A caveat is that the fixup hook for the mic mute LED has to be applied
at last, otherwise it results in the invalid override of the callback.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205529
Link: https://lore.kernel.org/r/20200105081119.21396-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current implementation of ALSA control API fully relies on the
callbacks of each driver, and there is no verification of the values
passed via API. This patch is an attempt to improve the situation
slightly by adding the validation code for the values stored via info
and get callbacks.
The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends
on CONFIG_SND_DEBUG and off as default since the validation would
require a slight overhead including the additional call of info
callback at each get callback invocation.
When this config is enabled, the values stored by each info callback
invocation are verified, namely:
- Whether the info type is valid
- Whether the number of enum items is non-zero
- Whether the given info count is within the allowed boundary
Similarly, the values stored at each get callback are verified as
well:
- Whether the values are within the given range
- Whether the values are aligned with the given step
- Whether any further changes are seen in the data array over the
given info count
The last point helps identifying a possibly invalid data type access,
typically a case where the info callback declares the type being
SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store
the values in value.integer.value[] array.
When a validation fails, the ALSA core logs an error message including
the device and the control ID, and the API call also returns an
error. So, with the new validation turned on, the driver behavior
difference may be visible on user-space, too -- it's intentional,
though, so that we can catch an error more clearly.
The patch also introduces a new ctl access type,
SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with
other access bits to indicate that the ctl element won't be verified.
It's useful when a driver code is specially written to access the data
greater than info->count size by some reason. For example, this flag
is actually set now in HD-audio HDMI codec driver which needs to clear
the data array in the case of the disconnected monitor.
Also, the PCM channel-map helper code is slightly modified to avoid
the false-positive hit by this validation code, too.
Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_pci_quirk tables are referred as read-only, hence they can be
declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-58-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we may declare const for snd_device_ops definitions, so let's do
it for optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The azx_pcm_hw structure is only copied into another structure,
so make it const.
The opportunity for this change was found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1577864614-5543-3-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS reported that there's an bass speaker in addition to internal
speaker and it uses DAC 0x02. It was not enabled in the commit
436e25505f ("ALSA: hda/realtek - Enable internal speaker of ASUS
UX431FLC") which only enables the amplifier and the front speaker.
This commit enables the bass speaker on top of the aforementioned
work to improve the acoustic experience.
Fixes: 436e25505f ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell has new platform which has dual speaker connecting.
They want dual speaker which use same dac for output.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/229c7efa2b474a16b7d8a916cd096b68@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Klaus Ethgen reported occasional high CPU usages in his system that
seem caused by HD-audio driver. The perf output revealed that it's
in the unsolicited event handling in the workqueue, and the problem
seems triggered by some communication stall between the controller and
the codec at the runtime or system resume.
Actually a similar phenomenon was seen in the past for other Intel
platforms, and we already applied the workaround to enforce sync-write
for CORB/RIRB verbs for Skylake and newer chipsets (commit
2756d9143a "ALSA: hda - Fix intermittent CORB/RIRB stall on Intel
chips"). Fortunately, the same workaround is applicable to the old
chipset, and the experiment showed the positive effect.
Based on the experiment result, this patch enables the sync-write
workaround for all Intel chipsets. The only reason I hesitated to
apply this workaround was about the possibly slightly higher CPU usage.
But if the lack of sync causes a much severer problem even for quite
old chip, we should think this would be necessary for all Intel chips.
Reported-by: Klaus Ethgen <Klaus@ethgen.ch>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191223171833.GA17053@chua
Link: https://lore.kernel.org/r/20191223221816.32572-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
You can't use PCI_BASE_CLASS with pci_get_class(). This
happens to work by luck on devices with PCI_CLASS_DISPLAY_VGA, but
misses PCI_CLASS_DISPLAY_OTHER. Add a check for those as well.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191221001702.1338587-1-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Taking the 5.5 devel branch back into the main devel branch.
A USB-audio fix needs to be adjusted to adapt the changes that have
been formerly applied for stop_sync.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=58V0
-----END PGP SIGNATURE-----
Merge tag 'y2038-alsa-v8-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into for-next
ALSA: Fix year 2038 issue for sound subsystem
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
We made the error message for the CORB/RIRB communication clearer by
upgrading to dev_WARN() so that user can notice better. But this
struck us like a boomerang: now it caught syzbot and reported back as
a fatal issue although it's not really any too serious bug that worth
for stopping the whole system.
OK, OK, let's be softy, downgrade it to the standard dev_err() again.
Fixes: dd65f7e19c ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")
Reported-by: syzbot+b3028ac3933f5c466389@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191216151224.30013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit e38e486d66 ("ALSA: hda: Modify stream stripe mask only
when needed") tried to address the regression by the unconditional
application of the stripe mask, but this caused yet another
regression for the previously working devices. Namely, the patch
clears the azx_dev->stripe flag at snd_hdac_stream_clear(), but this
may be called multiple times before restarting the stream, so this
ended up with clearance of the flag for the whole time.
This patch fixes the regression by moving the azx_dev->stripe flag
clearance at the counter-part, the close callback of HDMI codec
driver instead.
Fixes: e38e486d66 ("ALSA: hda: Modify stream stripe mask only when needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205855
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191214175217.31852-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend. This patch addresses those issues.
Fixes: 15c2b3cc09 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to keep power on while processing the DSP response via unsol
event. Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now most of the get_response handling became quite similar between
HDA-core and legacy drivers, and the only differences are:
- the handling of extra-long polling delay for some codecs
- the debug message for the stalled communication
and both are worth to share in the common code.
This patch unifies the code into snd_hdac_bus_get_response(), and use
this from the legacy get_response callback. It results in a good
amount of code reduction in the end.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191212191101.19517-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
