mirror of
https://github.com/torvalds/linux.git
synced 2024-12-04 01:51:34 +00:00
61a41d16ad
1911 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Palmer Dabbelt
|
61a41d16ad
|
RISC-V: Print SSTC in canonical order
This got out of order during a merge conflict, fix it by putting the
entries in the correct order.
Fixes:
|
||
Jisheng Zhang
|
542d353e25
|
riscv: compat: s/failed/unsupported if compat mode isn't supported
When compat mode isn't supported(I believe this is the most case now), kernel will emit somthing as: [ 0.050407] riscv: ELF compat mode failed This msg may make users think there's something wrong with the kernel itself, replace "failed" with "unsupported" to make it clear. In fact this is the real compat_mode_supported meaning. After the patch, the msg would be: [ 0.050407] riscv: ELF compat mode unsupported Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220821141819.3804-1-jszhang@kernel.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Anup Patel
|
e623715f3d
|
RISC-V: Increase range and default value of NR_CPUS
Currently, the range and default value of NR_CPUS is too restrictive for high-end RISC-V systems with large number of HARTs. The latest QEMU virt machine supports upto 512 CPUs so the current NR_CPUS is restrictive for QEMU as well. Other major architectures (such as ARM64, x86_64, MIPS, etc) have a much higher range and default value of NR_CPUS. This patch increases NR_CPUS range to 2-512 and default value to XLEN (i.e. 32 for RV32 and 64 for RV64). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220420112408.155561-1-apatel@ventanamicro.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Heinrich Schuchardt
|
82c75dca6f
|
riscv: enable CD-ROM file systems in defconfig
CD-ROM images are still commonly used for installer images and other data exchange. These file systems should be supported on RISC-V by default like they are on x86_64. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220812200853.311474-1-heinrich.schuchardt@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Conor Dooley
|
fbd9280999 |
riscv: topology: fix default topology reporting
RISC-V has no sane defaults to fall back on where there is no cpu-map
in the devicetree.
Without sane defaults, the package, core and thread IDs are all set to
-1. This causes user-visible inaccuracies for tools like hwloc/lstopo
which rely on the sysfs cpu topology files to detect a system's
topology.
On a PolarFire SoC, which should have 4 harts with a thread each,
lstopo currently reports:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
Core L#0
L1d L#0 (32KB) + L1i L#0 (32KB) + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + PU L#3 (P#3)
Adding calls to store_cpu_topology() in {boot,smp} hart bringup code
results in the correct topolgy being reported:
Machine (793MB total)
Package L#0
NUMANode L#0 (P#0 793MB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
CC: stable@vger.kernel.org #
|
||
Linus Torvalds
|
69dac8e431 |
RISC-V Patches for the 5.20 Merge Window, Part 2
There's still a handful of new features in here, but there are a lot of
fixes/cleanups as well:
* Support for the Zicbom for explicit cache-block management, along with
the necessary bits to make the non-standard cache management ops on
the Allwinner D1 function.
* Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax().
* Support for the Sstc extension for supervisor-mode timer/counter
management.
* Many device tree fixes and cleanups, including a large set for the
Canaan device trees.
* A handful of fixes and cleanups for the PMU driver.
-----BEGIN PGP SIGNATURE-----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=caji
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
|
||
Atish Patra
|
8f5cb44b1b
|
RISC-V: KVM: Support sstc extension
Sstc extension allows the guest to program the vstimecmp CSR directly instead of making an SBI call to the hypervisor to program the next event. The timer interrupt is also directly injected to the guest by the hardware in this case. To maintain backward compatibility, the hypervisors also update the vstimecmp in an SBI set_time call if the hardware supports it. Thus, the older kernels in guest also take advantage of the sstc extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/all/CAAhSdy2mb6wyqy0NAn9BcTWKMYEc0Z4zU3s3j7oNqBz6eDQ9sg@mail.gmail.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
9801002f76
|
perf: riscv_pmu{,_sbi}: Miscallenous improvement & fixes
A series of mostly-independent fixes and cleanups for the RISC-V PMU drivers. Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2 * palmer/riscv-pmu: RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 |
||
|
Atish Patra
|
f829ee7595
|
RISC-V: Improve SBI definitions
Fixed few typos and bit fields not aligned with the spec. Define other related macros that will be useful in the future. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-6-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Atish Patra
|
63ba67ebdf
|
RISC-V: Move counter info definition to sbi header file
Counter info encoding format is defined by the SBI specificaiton. KVM implementation of SBI PMU extension will also leverage this definition. Move the definition to common sbi header file from the sbi pmu driver. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
7ab52f75a9
|
RISC-V: Add Sstc extension support
This series implements Sstc extension support which was ratified recently. Before the Sstc extension, an SBI call is necessary to generate timer interrupts as only M-mode have access to the timecompare registers. Thus, there is significant latency to generate timer interrupts at kernel. For virtualized enviornments, its even worse as the KVM handles the SBI call and uses a software timer to emulate the timecomapre register. Sstc extension solves both these problems by defining a stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to program a timer and recieve interrupt without supervisor execution enviornment (M-mode/HS mode) intervention. * palmer/riscv-sstc: RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details |
||
|
Atish Patra
|
464b0187ff
|
RISC-V: Enable sstc extension parsing from DT
The ISA extension framework now allows parsing any multi-letter ISA extension. Enable that for sstc extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220722165047.519994-3-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Atish Patra
|
bf952a290f
|
RISC-V: Add SSTC extension CSR details
This patch just introduces the required CSR fields related to the SSTC extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220722165047.519994-2-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Yipeng Zou
|
3dbe582940
|
riscv:uprobe fix SR_SPIE set/clear handling
In riscv the process of uprobe going to clear spie before exec
the origin insn,and set spie after that.But When access the page
which origin insn has been placed a page fault may happen and
irq was disabled in arch_uprobe_pre_xol function,It cause a WARN
as follows.
There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol.
We can just remove it.
[ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488
[ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work
[ 31.684929] preempt_count: 0, expected: 0
[ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G
[ 31.686542] Hardware name: riscv-virtio,qemu (DT)
[ 31.686797] Call Trace:
[ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38
[ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c
[ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c
[ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20
[ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122
[ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a
[ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130
[ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446
[ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc
Fixes:
|
||
|
Conor Dooley
|
87df2b5cbc
|
riscv: ensure cpu_ops_sbi is declared
Sparse complains that cpu_ops_sbi is used undeclared: arch/riscv/kernel/cpu_ops_sbi.c:17:29: warning: symbol 'cpu_ops_sbi' was not declared. Should it be static? Fix the warning by adding cpu_ops_sbi to cpu_ops_sbi.h & including that where used. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220714080235.3853374-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Ben Dooks
|
e4aa991c05
|
RISC-V: cpu_ops_spinwait.c should include head.h
Running sparse shows cpu_ops_spinwait.c is missing two definitions
found in head.h, so include it to stop the following warnings:
arch/riscv/kernel/cpu_ops_spinwait.c:15:6: warning: symbol '__cpu_spinwait_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/cpu_ops_spinwait.c:16:6: warning: symbol '__cpu_spinwait_task_pointer' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220713215306.94675-1-ben.dooks@sifive.com
Fixes:
|
||
|
Ben Dooks
|
da6d2128e5
|
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
The cpu_ops_spinwait is used in a couple of places in arch/riscv
and is causing a sparse warning due to no declaration. Add this
to <asm/cpu_ops.h> with the others to fix the following:
arch/riscv/kernel/cpu_ops_spinwait.c:16:29: warning: symbol 'cpu_ops_spinwait' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220714071811.187491-1-ben.dooks@sifive.com
[Palmer: Drop the extern from cpu_ops.c]
Fixes:
|
||
Mark Kettenis
|
a208acf0ea
|
riscv: dts: starfive: correct number of external interrupts
The PLIC integrated on the Vic_U7_Core integrated on the StarFive
JH7100 SoC actually supports 133 external interrupts. 127 of these
are exposed to the outside world; the remainder are used by other
devices that are part of the core-complex such as the L2 cache
controller. But all 133 interrupts are external interrupts as far
as the PLIC is concerned. Fix the property so that the driver can
manage these additional interrupts, which is important since the
interrupts for the L2 cache controller are enabled by default.
Fixes:
|
||
Emil Renner Berthing
|
2cfe9bbec5
|
riscv: dts: sifive unmatched: Add PWM controlled LEDs
This adds the two PWM controlled LEDs to the HiFive Unmatched device tree. D12 is just a regular green diode, but D2 is an RGB diode with 3 PWM inputs controlling the three different colours. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Ron Economos <re@w6rz.net> Link: https://lore.kernel.org/r/20220705210143.315151-5-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Masahiro Yamada
|
d8357e3bf8
|
riscv/purgatory: Omit use of bin2c
The .incbin assembler directive is much faster than bin2c + $(CC).
Do similar refactoring as in commit
|
||
|
Masahiro Yamada
|
788177e765
|
riscv/purgatory: hard-code obj-y in Makefile
The purgatory/ directory is entirely guarded in arch/riscv/Kbuild. CONFIG_ARCH_HAS_KEXEC_PURGATORY is bool type. $(CONFIG_ARCH_HAS_KEXEC_PURGATORY) is always 'y' when Kbuild visits this Makefile for building. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220625223438.835408-1-masahiroy@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
da06cc5bb6
|
RISC-V: fixups to work with crash tool
A handful of fixes to our kexec/crash kernel support that allow crash tool to function. Link: https://lore.kernel.org/r/mhng-f5fdaa37-e99a-4214-a297-ec81f0fed0c1@palmer-mbp2014 * commit 'f9293ad46d8ba9909187a37b7215324420ad4596': RISC-V: Add modules to virtual kernel memory layout dump RISC-V: Fixup schedule out issue in machine_crash_shutdown() RISC-V: Fixup get incorrect user mode PC for kernel mode regs RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context |
||
Xianting Tian
|
f9293ad46d
|
RISC-V: Add modules to virtual kernel memory layout dump
Modules always live before the kernel, MODULES_END is fixed but
MODULES_VADDR isn't fixed, it depends on the kernel size.
Let's add it to virtual kernel memory layout dump.
As MODULES is only defined for CONFIG_64BIT, so we dump it when
CONFIG_64BIT=y.
eg,
MODULES_VADDR - MODULES_END
0xffffffff01133000 - 0xffffffff80000000
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220811074150.3020189-5-xianting.tian@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes:
|
||
Krzysztof Kozlowski
|
76ad33e1b9
|
riscv: traps_misaligned: do not duplicate stringify
Use existing stringify macro from the kernel headers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220623112905.253157-1-krzysztof.kozlowski@linaro.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Xianting Tian
|
ad943893d5
|
RISC-V: Fixup schedule out issue in machine_crash_shutdown()
Current task of executing crash kexec will be schedule out when panic is
triggered by RCU Stall, as it needs to wait rcu completion. It lead to
inability to enter the crash system.
The implementation of machine_crash_shutdown() is non-standard for RISC-V
according to other Arch's implementation(eg, x86, arm64), we need to send
IPI to stop secondary harts.
[224521.877268] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[224521.883471] rcu: 0-...0: (3 GPs behind) idle=cfa/0/0x1 softirq=3968793/3968793 fqs=2495
[224521.891742] (detected by 2, t=5255 jiffies, g=60855593, q=328)
[224521.897754] Task dump for CPU 0:
[224521.901074] task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x00000008
[224521.911090] Call Trace:
[224521.913638] [<ffffffe000c432de>] __schedule+0x208/0x5ea
[224521.918957] Kernel panic - not syncing: RCU Stall
[224521.923773] bad: scheduling from the idle thread!
[224521.928571] CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Tainted: G O 5.10.113-yocto-standard #1
[224521.938658] Call Trace:
[224521.941200] [<ffffffe00020395c>] walk_stackframe+0x0/0xaa
[224521.946689] [<ffffffe000c34f8e>] show_stack+0x32/0x3e
[224521.951830] [<ffffffe000c39020>] dump_stack_lvl+0x7e/0xa2
[224521.957317] [<ffffffe000c39058>] dump_stack+0x14/0x1c
[224521.962459] [<ffffffe000243884>] dequeue_task_idle+0x2c/0x40
[224521.968207] [<ffffffe000c434f4>] __schedule+0x41e/0x5ea
[224521.973520] [<ffffffe000c43826>] schedule+0x34/0xe4
[224521.978487] [<ffffffe000c46cae>] schedule_timeout+0xc6/0x170
[224521.984234] [<ffffffe000c4491e>] wait_for_completion+0x98/0xf2
[224521.990157] [<ffffffe00026d9e2>] __wait_rcu_gp+0x148/0x14a
[224521.995733] [<ffffffe0002761c4>] synchronize_rcu+0x5c/0x66
[224522.001307] [<ffffffe00026f1a6>] rcu_sync_enter+0x54/0xe6
[224522.006795] [<ffffffe00025a436>] percpu_down_write+0x32/0x11c
[224522.012629] [<ffffffe000c4266a>] _cpu_down+0x92/0x21a
[224522.017771] [<ffffffe000219a0a>] smp_shutdown_nonboot_cpus+0x90/0x118
[224522.024299] [<ffffffe00020701e>] machine_crash_shutdown+0x30/0x4a
[224522.030483] [<ffffffe00029a3f8>] __crash_kexec+0x62/0xa6
[224522.035884] [<ffffffe000c3515e>] panic+0xfa/0x2b6
[224522.040678] [<ffffffe0002772be>] rcu_sched_clock_irq+0xc26/0xcb8
[224522.046774] [<ffffffe00027fc7a>] update_process_times+0x62/0x8a
[224522.052785] [<ffffffe00028d522>] tick_sched_timer+0x9e/0x102
[224522.058533] [<ffffffe000280c3a>] __hrtimer_run_queues+0x16a/0x318
[224522.064716] [<ffffffe0002812ec>] hrtimer_interrupt+0xd4/0x228
[224522.070551] [<ffffffe0009a69b6>] riscv_timer_interrupt+0x3c/0x48
[224522.076646] [<ffffffe000268f8c>] handle_percpu_devid_irq+0xb0/0x24c
[224522.083004] [<ffffffe00026428e>] __handle_domain_irq+0xa8/0x122
[224522.089014] [<ffffffe00062f954>] riscv_intc_irq+0x38/0x60
[224522.094501] [<ffffffe000201bd4>] ret_from_exception+0x0/0xc
[224522.100161] [<ffffffe000c42146>] rcu_eqs_enter.constprop.0+0x8c/0xb8
With the patch, it can enter crash system when RCU Stall occur.
Fixes:
|
||
|
Xianting Tian
|
59c026c359
|
RISC-V: Fixup get incorrect user mode PC for kernel mode regs
When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs()
will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400
is not a valid kernel virtual address, but is a user virtual address. Other
regs(eg, ra, sp, gp...) are correct kernel virtual address.
Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which
is saved in the task's stack.
[ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45
[ 21.201979] Hardware name: riscv-virtio,qemu (DT)
[ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90
[ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c
[ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0
[ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001
[ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00
[ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8
[ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98
[ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468
[ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700
[ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00
[ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8
[ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008
With the incorrect PC, the backtrace showed by crash tool as below, the first
stack frame is abnormal,
crash> bt
PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh"
#0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal
#1 [ff2000001039bcf0] panic at ffffffff806578ba
#2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030
#3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8
#4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8
#5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc
#6 [ff2000001039be40] vfs_write at ffffffff80152ba6
#7 [ff2000001039be80] ksys_write at ffffffff80152ece
#8 [ff2000001039bed0] sys_write at ffffffff80152f46
With the patch, we can get current kernel mode PC, the output as below,
[ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42
[ 17.607937] Hardware name: riscv-virtio,qemu (DT)
[ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90
[ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68
[ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0
[ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001
[ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000
[ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4
[ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98
[ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468
[ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700
[ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00
[ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988
[ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008
With the correct PC, the backtrace showed by crash tool as below,
crash> bt
PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh"
#0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal
#1 [ff20000010333cf0] panic at ffffffff806578c6
#2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c
#3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604
#4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4
#5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8
#6 [ff20000010333e40] vfs_write at ffffffff80152bb2
#7 [ff20000010333e80] ksys_write at ffffffff80152eda
#8 [ff20000010333ed0] sys_write at ffffffff80152f52
Fixes:
|
||
|
Xianting Tian
|
357628e68f
|
RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context
Use __smp_processor_id() to avoid check the preemption context when
CONFIG_DEBUG_PREEMPT enabled, as we will enter crash kernel and no
return.
Without the patch,
[ 103.781044] sysrq: Trigger a crash
[ 103.784625] Kernel panic - not syncing: sysrq triggered crash
[ 103.837634] CPU1: off
[ 103.889668] CPU2: off
[ 103.933479] CPU3: off
[ 103.939424] Starting crashdump kernel...
[ 103.943442] BUG: using smp_processor_id() in preemptible [00000000] code: sh/346
[ 103.950884] caller is debug_smp_processor_id+0x1c/0x26
[ 103.956051] CPU: 0 PID: 346 Comm: sh Kdump: loaded Not tainted 5.10.113-00002-gce03f03bf4ec-dirty #149
[ 103.965355] Call Trace:
[ 103.967805] [<ffffffe00020372a>] walk_stackframe+0x0/0xa2
[ 103.973206] [<ffffffe000bcf1f4>] show_stack+0x32/0x3e
[ 103.978258] [<ffffffe000bd382a>] dump_stack_lvl+0x72/0x8e
[ 103.983655] [<ffffffe000bd385a>] dump_stack+0x14/0x1c
[ 103.988705] [<ffffffe000bdc8fe>] check_preemption_disabled+0x9e/0xaa
[ 103.995057] [<ffffffe000bdc926>] debug_smp_processor_id+0x1c/0x26
[ 104.001150] [<ffffffe000206c64>] machine_kexec+0x22/0xd0
[ 104.006463] [<ffffffe000291a7e>] __crash_kexec+0x6a/0xa4
[ 104.011774] [<ffffffe000bcf3fa>] panic+0xfc/0x2b0
[ 104.016480] [<ffffffe000656ca4>] sysrq_reset_seq_param_set+0x0/0x70
[ 104.022745] [<ffffffe000657310>] __handle_sysrq+0x8c/0x154
[ 104.028229] [<ffffffe0006577e8>] write_sysrq_trigger+0x5a/0x6a
[ 104.034061] [<ffffffe0003d90e0>] proc_reg_write+0x58/0xd4
[ 104.039459] [<ffffffe00036cff4>] vfs_write+0x7e/0x254
[ 104.044509] [<ffffffe00036d2f6>] ksys_write+0x58/0xbe
[ 104.049558] [<ffffffe00036d36a>] sys_write+0xe/0x16
[ 104.054434] [<ffffffe000201b9a>] ret_from_syscall+0x0/0x2
[ 104.067863] Will call new kernel at ecc00000 from hart id 0
[ 104.074939] FDT image at fc5ee000
[ 104.079523] Bye...
With the patch we can got clear output,
[ 67.740553] sysrq: Trigger a crash
[ 67.744166] Kernel panic - not syncing: sysrq triggered crash
[ 67.809123] CPU1: off
[ 67.865210] CPU2: off
[ 67.909075] CPU3: off
[ 67.919123] Starting crashdump kernel...
[ 67.924900] Will call new kernel at ecc00000 from hart id 0
[ 67.932045] FDT image at fc5ee000
[ 67.935560] Bye...
Fixes:
|
||
Dao Lu
|
8eb060e101
|
arch/riscv: add Zihintpause support
Implement support for the ZiHintPause extension. The PAUSE instruction is a HINT that indicates the current hart’s rate of instruction retirement should be temporarily reduced or paused. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dao Lu <daolu@rivosinc.com> [Palmer: Some minor merge conflicts.] Link: https://lore.kernel.org/all/20220620201530.3929352-1-daolu@rivosinc.com/ Link: https://lore.kernel.org/all/20220811053356.17375-1-palmer@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
3aefb2ee5b
|
riscv: implement Zicbom-based CMO instructions + the t-head variant
This series is based on the alternatives changes done in my svpbmt series and thus also depends on Atish's isa-extension parsing series. It implements using the cache-management instructions from the Zicbom- extension to handle cache flush, etc actions on platforms needing them. SoCs using cpu cores from T-Head like the Allwinne D1 implement a different set of cache instructions. But while they are different, instructions they provide the same functionality, so a variant can easly hook into the existing alternatives mechanism on those. [Palmer: Some minor fixups, including a RISCV_ISA_ZICBOM dependency on MMU that's probably not strictly necessary. The Zicbom support will trip up sparse for users that have new toolchains, I just sent a patch.] Link: https://lore.kernel.org/all/20220706231536.2041855-1-heiko@sntech.de/ Link: https://lore.kernel.org/linux-sparse/20220811033138.20676-1-palmer@rivosinc.com/T/#u * palmer/riscv-zicbom: riscv: implement cache-management errata for T-Head SoCs riscv: Add support for non-coherent devices using zicbom extension dt-bindings: riscv: document cbom-block-size of: also handle dma-noncoherent in of_dma_is_coherent() |
||
|
Palmer Dabbelt
|
8f2f74b4b6
|
RISC-V: Canaan devicetree fixes
This series should rid us of dtbs_check errors for the RISC-V Canaan k210 based boards. To make keeping it that way a little easier, I changed the Canaan devicetree Makefile so that it would build all of the devicetrees in the directory if SOC_CANAAN. Link: https://lore.kernel.org/all/mhng-85044754-c361-40bc-a6a2-7082f35930bb@palmer-ri-x1c9/ * remotes/palmer/riscv-canaan_dt_schema: riscv: dts: canaan: build all devicetress if SOC_CANAAN riscv: dts: canaan: add specific compatible for kd233's LCD riscv: dts: canaan: fix bus {ranges,reg} warnings riscv: dts: canaan: remove spi-max-frequency from controllers riscv: dts: canaan: use custom compatible for k210 i2s riscv: dts: canaan: fix kd233 display spi frequency riscv: dts: canaan: fix mmc node names riscv: dts: canaan: fix the k210's timer nodes riscv: dts: canaan: fix the k210's memory node dt-bindings: memory-controllers: add canaan k210 sram controller dt-bindings: display: ili9341: document canaan kd233's lcd dt-bindings: display: convert ilitek,ili9341.txt to dt-schema |
||
Chen Lifu
|
c08b4848f5
|
riscv: lib: uaccess: fix CSR_STATUS SR_SUM bit
Since commit |
||
|
Linus Torvalds
|
eb5699ba31 |
Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9 kwS/13j38guulSlXRzDLmitbg81zAAI= =Zfum -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ... |
||
|
Linus Torvalds
|
4d1044fcb9 |
RISC-V Patches for the 5.20 Merge Window, Part 1
* Enabling the FPU is now a static_key.
* Improvements to the Svpbmt support.
* CPU topology bindings for a handful of systems.
* Support for systems with 64-bit hart IDs.
* Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements.
There are also a handful of cleanups and improvements, like usual.
-----BEGIN PGP SIGNATURE-----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=v9hn
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
|
||
|
Linus Torvalds
|
6614a3c316 |
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
||
|
Linus Torvalds
|
3bd6e5854b |
asm-generic: updates for 6.0
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLqPPEACgkQmmx57+YA
GNlUbQ/+NpIsiA0JUrCGtySt8KrLHdA2dH9lJOR5/iuxfphscPFfWtpcPvcXQWmt
a8u7wyI8SHW1ku4U0Y5sO0dBSldDnoIqJ5t4X5d7YNU9yVtEtucqQhZf+GkrPlVD
1HkRu05B7y0k2BMn7BLhSvkpafs3f1lNGXjs8oFBdOF1/zwp/GjcrfCK7KFzqjwU
dYrX0SOFlKFd4BZC75VfK+XcKg4LtwIOmJraRRl7alz2Q5Oop2hgjgZxXDPf//vn
SPOhXJN/97i1FUpY2TkfHVH1NxbPfjCV4pUnjmLG0Y4NSy9UQ/ZcXHcywIdeuhfa
0LySOIsAqBeccpYYYdg2ubiMDZOXkBfANu/sB9o/EhoHfB4svrbPRDhBIQZMFXJr
MJYu+IYce2rvydA/nydo4q++pxR8v1ES1ZIo8bDux+q1CI/zbpQV+f98kPVRA0M7
ajc+5GTIqNIsvHzzadq7eYxcj5Bi8Li2JA9sVkAQ+6iq1TVyeYayMc9eYwONlmqw
MD+PFYc651pKtXZCfkLXPIKSwS0uPqBndAibuVhpZ0hxWaCBBdKvY9mrWcPxt0kA
tMR8lrosbbrV2K48BFdWTOHvCs2FhHQxPGVPZ/iWuxTA0hHZ9tUlaEkSX+VM57IU
KCYQLdWzT8J9vrgqSbgYKlb6pSPz6FIjTfut6NZMmshIbavHV/Q=
=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
||
|
Linus Torvalds
|
eff0cb3d91 |
pci-v5.20-changes
-----BEGIN PGP SIGNATURE-----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=9TAR
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
||
|
Linus Torvalds
|
7c5c3a6177 |
ARM:
* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
|
||
Heiko Stuebner
|
d20ec75292
|
riscv: implement cache-management errata for T-Head SoCs
The T-Head C906 and C910 implement a scheme for handling cache operations different from the generic Zicbom extension. Add an errata for it next to the generic dma coherency ops. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220706231536.2041855-5-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
f86d1fbbe7 |
Networking changes for 6.0.
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
|
||
|
Linus Torvalds
|
97a77ab14f |
EFI updates for v5.20
- Enable mirrored memory for arm64 - Fix up several abuses of the efivar API - Refactor the efivar API in preparation for moving the 'business logic' part of it into efivarfs - Enable ACPI PRM on arm64 -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmLhuDIACgkQw08iOZLZ jyS9IQv/Wc2nhjN50S3gfrL+68/el/hGdP/J0FK5BOOjNosG2t1ZNYZtSthXqpPH hRrTU2m6PpQUalRpFDyLiHkJvdBFQe4VmvrzBa3TIBIzyflLQPJzkWrqThPchV+B qi4lmCtTDNIEJmayewqx1wWA+QmUiyI5zJ8wrZp84LTctBPL75seVv0SB20nqai0 3/I73omB2RLVGpCpeWvb++vePXL8euFW3FEwCTM8hRboICjORTyIZPy8Y5os+3xT UgrIgVDOtn1Xwd4tK0qVwjOVA51east4Fcn3yGOrL40t+3SFm2jdpAJOO3UvyNPl vkbtjvXsIjt3/oxreKxXHLbamKyueWIfZRyCLsrg6wrr96oypPk6ID4iDCQoen/X Zf0VjM2vmvSd4YgnEIblOfSBxVg48cHJA4iVHVxFodNTrVnzGGFYPTmNKmJqo+Xn JeUILM7jlR4h/t0+cTTK3Busu24annTuuz5L5rjf4bUm6pPf4crb1yJaFWtGhlpa er233D6O =zI0R -----END PGP SIGNATURE----- Merge tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: - Enable mirrored memory for arm64 - Fix up several abuses of the efivar API - Refactor the efivar API in preparation for moving the 'business logic' part of it into efivarfs - Enable ACPI PRM on arm64 * tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) ACPI: Move PRM config option under the main ACPI config ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64 ACPI: PRM: Change handler_addr type to void pointer efi: Simplify arch_efi_call_virt() macro drivers: fix typo in firmware/efi/memmap.c efi: vars: Drop __efivar_entry_iter() helper which is no longer used efi: vars: Use locking version to iterate over efivars linked lists efi: pstore: Omit efivars caching EFI varstore access layer efi: vars: Add thin wrapper around EFI get/set variable interface efi: vars: Don't drop lock in the middle of efivar_init() pstore: Add priv field to pstore_record for backend specific use Input: applespi - avoid efivars API and invoke EFI services directly selftests/kexec: remove broken EFI_VARS secure boot fallback check brcmfmac: Switch to appropriate helper to load EFI variable contents iwlwifi: Switch to proper EFI variable store interface media: atomisp_gmin_platform: stop abusing efivar API efi: efibc: avoid efivar API for setting variables efi: avoid efivars layer when loading SSDTs from variables efi: Correct comment on efi_memmap_alloc memblock: Disable mirror feature if kernelcore is not specified ... |
||
|
Linus Torvalds
|
7d9d077c78 |
RCU pull request for v5.20 (or whatever)
This pull request contains the following branches: doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms. poll.2022.07.21a: Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods. rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead. torture.2022.06.21a: Torture-test updates. ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r vX60+QNxvUBLwA== =vUNm -----END PGP SIGNATURE----- Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ... |
||
|
Linus Torvalds
|
22a39c3d86 |
This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives
that can lose the lock_type & cause false reports. No such mishap was
observed in the wild.
- jump_label improvements: simplify the cross-arch support of
initial NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4B89
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
|
||
Paolo Bonzini
|
63f4b21041 |
Merge remote-tracking branch 'kvm/next' into kvm-next-5.20
KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID |
||
Ben Dooks
|
787dbea11a |
profile: setup_profiling_timer() is moslty not implemented
The setup_profiling_timer() is mostly un-implemented by many architectures. In many places it isn't guarded by CONFIG_PROFILE which is needed for it to be used. Make it a weak symbol in kernel/profile.c and remove the 'return -EINVAL' implementations from the kenrel. There are a couple of architectures which do return 0 from the setup_profiling_timer() function but they don't seem to do anything else with it. To keep the /proc compatibility for now, leave these for a future update or removal. On ARM, this fixes the following sparse warning: arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
e4d8b09d67 |
A Single RISC-V Fix for 5.19
* A build fix for "make vdso_install" that avoids an issue trying to install the compat VDSO. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAmLkEq4THHBhbG1lckBk YWJiZWx0LmNvbQAKCRDvTKFQLMurQTr3EACMq1ZAesdwQotPIM8dDzK4GpPAjls9 hmABlhZtllmr0lADpv3XoMMKKguPdyV0+TgnfEP9hMr3jTQ7n6Y+3q3kM/TV/uLv IC2xCiulHF7gqT7SJT2CmoScbfHw1ibdWlQg7rnjXYK5mVxboYJwrjW2+TxoAc01 nbuUuuExkA2aUaFa7Io3y9D/heG1cz3zZA/XkreDtRc4bC5l9dDhfLOOOXeZL+5J CJo9ZujN2dHGzh6EjmGZNauA5akJe/c2QnqO/8EK8d2EjJqDQRiewqZc8xKQpQo/ A8FQK/cFatFZGrMYhoEswswSWVuuesb5774s9LoyyB9tQDrHd3dmzJhkjikAqlva lMh0WcnemHFZtl7sp6yhE7wjzKSHCKmtFULJS5OnJkjCh+A3UJ3mTDnPsese7g/j 2oAp9v4VoTcWk2v/IErtiwUiwNdJeM5ptm62OweQJ6W+VnhK2JWICvr5wExnjP6Z zI9KuwKQLzJ7tt8OLZ0t3sR+J3EG1rt217Xi5KRWGEWtreKzg0YAQYghpFKlR0BR YVgEPQfQ5S+2zerlwtRzvD7W7e2tRMoqskRfWhtKM9VMNRQelrHJGPPqZx6E67n9 9CVSXqcqcRGkJUuR3pt8Nki4JTnT6skDVGhv5VEQlpYXZ54igfj1yQ/tx2ePFZW8 J4RiRzavozacaw== =JmTV -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "A build fix for 'make vdso_install' that avoids an issue trying to install the compat VDSO" * tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: compat: vdso: Fix vdso_install target |
||
|
Anup Patel
|
6bb2e00ea3 |
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
The Guest/VM can use Svpbmt in VS-stage page tables when allowed by the Hypervisor using the henvcfg.PBMTE bit. We add Svpbmt support for the KVM Guest/VM which can be enabled/disabled by the KVM user-space (QEMU/KVMTOOL) using the ISA extension ONE_REG interface. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org> |
||
|
Anup Patel
|
659ad6d82c |
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
When the host has Svpbmt extension, we should use page based memory type 2 (i.e. IO) for IO mappings in the G-stage page table. To achieve this, we replace use of PAGE_KERNEL with PAGE_KERNEL_IO in the kvm_riscv_gstage_ioremap(). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org> |
||
|
Anup Patel
|
c9d57373fc |
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
The in-kernel AIA IMSIC support requires on-demand mapping / unmapping of Guest IMSIC address to Host IMSIC guest files. To help achieve this, we add kvm_riscv_stage2_ioremap() and kvm_riscv_stage2_iounmap() functions. These new functions for updating G-stage page table mappings will be called in atomic context so we have special "in_atomic" parameter for this purpose. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org> |
||
|
Anup Patel
|
8a061562e2 |
RISC-V: KVM: Add extensible CSR emulation framework
We add an extensible CSR emulation framework which is based upon the existing system instruction emulation. This will be useful to upcoming AIA, PMU, Nested and other virtualization features. The CSR emulation framework also has provision to emulate CSR in user space but this will be used only in very specific cases such as AIA IMSIC CSR emulation in user space or vendor specific CSR emulation in user space. By default, all CSRs not handled by KVM RISC-V will be redirected back to Guest VCPU as illegal instruction trap. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org> |
||
|
Anup Patel
|
1222b55cee |
RISC-V: KVM: Add extensible system instruction emulation framework
We will be emulating more system instructions in near future with upcoming AIA, PMU, Nested and other virtualization features. To accommodate above, we add an extensible system instruction emulation framework in vcpu_insn.c. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org> |