DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- exynos_defconfig
: enable USB Video Class for Peach boards.
: enable DWC2 USB and USB ethernet gadget
: enable LEDs (LEGS_GPIO and LEDS_PWM)for Odroid-XU3/XU4
: enable RTL8152 for Odroid-XU4
: enable WiFi-Ex as a module instead of build-in
: disable temporal simplefb support (FB_SIMPLE) because
exynos DRM driver can support it now
- multi_v7_defconfig
: enable DWC2 USB and USB ethernet gadget
: enable RTL8152 for Odroid-XU4
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=YhpK
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig
Samsung defconfig udpates for v4.4
- exynos_defconfig
: enable USB Video Class for Peach boards.
: enable DWC2 USB and USB ethernet gadget
: enable LEDs (LEGS_GPIO and LEDS_PWM)for Odroid-XU3/XU4
: enable RTL8152 for Odroid-XU4
: enable WiFi-Ex as a module instead of build-in
: disable temporal simplefb support (FB_SIMPLE) because
exynos DRM driver can support it now
- multi_v7_defconfig
: enable DWC2 USB and USB ethernet gadget
: enable RTL8152 for Odroid-XU4
* tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
ARM: exynos_defconfig: Disable simplefb support
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable USB Video Class support
Signed-off-by: Olof Johansson <olof@lixom.net>
Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Odroid-XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Marvell WiFi-Ex driver tries to load a firmware on probe. So if the
driver is built-in and probed before a firmware is available, this is
not loaded and the chip does not work.
This happens for example if an initramfs isn't used since the driver is
probed before the root filesystem is mounted.
Change the default config since the driver isn't needed for machines to
boot and is more convenient to have it enabled as a module to avoid
requiring an initramfs or to have the firmware built into the kernel.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The simplefb driver allows the kernel to render on a pre-allocated
buffer that's been initialized by firmware before the kernel boots.
This option was enabled to have display working on the Exynos5250
Snow Chromebook by commit da9d0fbf5e ("ARM: exynos: defconfig
update") since proper DRM/KMS support did not exist at that time.
But now that the Exynos DRM driver has support for this hardware,
there is no need to have simplefb enabled. In fact, if a user has
a u-boot that injects the simplefb dev node to the FDT before pass
it to the kernel, display won't be properly initialized and only a
blank screen will be shown since there isn't a proper handoff from
the simplefb driver to the Exynos DRM driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Tested-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and
LEDS_PWM allows monitoring the board alive state (heartbeat) and
MMC/SDcard IO usage.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
[k.kozlowski: Rewritten the commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in
Silicon Motion USB UVC WebCam. Enable support for the USB Video Class
driver and its needed media Kconfig symbols so the camera is supported.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
A bunch of defconfig changes to enable support for new drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWIn+gAAoJEBx+YmzsjxAgquQP/20gRC/wzuxJPQkiN9NIrkWg
CTfDzr6Tbm1/Wu8HhfBAEPHLrRLQ9pSL+tQ8pYUOzS/1b/Jjs45qARqaJfhmfmAX
jz0Kp/VyqZ7vg81nutfp/QGK0EMst2izeKkmkI55WKVMJy+xZ3e7J9ED7XRJg7V5
+RU8P+/nCzFVc1gboYf2qa4rE+EW49E2jNV2MBpkU2TA8vqzyF7w/Ye5Rv20Q8Zo
kGpIxbDg9ua0Ak8TVgSX8ocq+wlqD5OyOIixTJ0X+MovHKGl0gDZ4Pj43XrZuGEj
0Wl3AIn69e0cVYatTWIvBT+LkntIVihfgsZsZg+QdcNfumxeJkYs4p56JCRaM2zf
JdqpRTjq/ueZ3WkwItK07mAoVshKrK5+IcAR8zhbOAWACQ9N1lHMIODnNIvLWveq
0R8eymRQN5yyYJ22o5Jc+EellWGmbLKC89QYnQPs8um2TlhTB4whlswa6UMi4DZP
1zWCixjGEuKTJIGRf+vdKQVJZrMEXVSWO9/TM6j2z0dPa6gOGu1Jfp9H2kZseXZ9
XfBr8CPiawkPpz4nQNxNgv4zYhRPRj1TltDsExpVUjjkQsNOMQpS6+l86uWEilaT
xW3R3FJ5h7kIhdR+FEi1/t1SZKlQbrniLZ+lMdxefFbMO9d7NBkNyPztL9fbI4Nv
bF8RmqZPK06kkYPVvBAq
=g7fp
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.4
A bunch of defconfig changes to enable support for new drivers.
* tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi_defconfig: enable MODULE_UNLOAD
can: Allwinner A10/A20 CAN Controller support - Defconfig
can: Allwinner A10/A20 CAN Controller support - Defconfig
ARM: sunxi_defconfig: Enable LRADC keys (KEYBOARD_SUN4I_LRADC)
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the v7 defconfig witth usefull config for the Seagate NAS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYiY+EACgkQCwYYjhRyO9WANACfdPTeOBofTpIFChzcNlg823Su
BIYAn1XQ+oxXKt/mmh0xWRJGcIEKQJPP
=+DPM
-----END PGP SIGNATURE-----
Merge tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu config for 4.4 (part 1)
Update the v7 defconfig witth usefull config for the Seagate NAS
* tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable options for Seagate NAS in mvebu_v7_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them:
* The pxa168 Ethernet driver is added as a loadable module.
* The Berlin ADC driver is added as a loadable module.
* Both the Berlin USB PHY and SATA PHY drivers are added,
built-in, as they are required for the already available USB
and SATA functionalities in multi_v7_defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable some options that have recently been enabled on Tegra platforms:
* TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri
* SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The Flexcom device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
CONFIG_FIXED_PHY is needed to have Ethernet working on STi boards.
Select it as built-in since RootFS is accessible from NFS on these boards.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable SPIFI Flash and JFFS2 to support rootfs on Flash memory
- Enable USB Phy, mass storage and SCSI to support USB memory
- Enable PCF857x and JC42 I2C devices found on Hitex board
- Enable PL172 to support memory mapped NOR Flash
- New LPC18xx drivers: I2C, Watchdog, SCT PWM and RTC
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable fpga manager framework and low level driver for
socfpga in socfpga_defconfig
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables the following options needed by the Seagate
Personal Cloud 1 and 2-Bay and the Seagate NAS 2 and 4-Bay:
SATA_AHCI
POWER_RESET_GPIO
RTC_DRV_DS1307
RTC_DRV_PCF8563
Additionnally this patch also enables NEW_LEDS which was missing for
some reasons.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Similar to the power management situation on Rockchip boards, there are
two common RTC setups. For boards using the RK808 chip as a PMIC that
chip also serves as the RTC, while boards using the ACT8846 typically use
the Haoyu Microelectronics HYM8563 chip as their RTC.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most Rockchip SoCs have a DesignWare HS OTG USB 2.0 controller, enable
the driver for the Rockchip USB 2.0 PHY to make that functional.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable options needed for HDMI out on rockchip: DRM driver, Rockchip
DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM
driver).
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rockchip boards seem to have two common regulator setups. Various board
used the Active Semi act8846 often in combination with Silergy syr82x
regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc),
while others use regulator part of the Rockchip RK808 chip (e.g. the
various Veyron based chromebooks, Chipspark Popmetal etc)
Enable all these regulators.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable Rockchip I2C, SPI, PWM, thermal drivers.
Builtin are I2C (as it often required to control the pmic) and Thermal
drivers (to prevent thermal damage). SPI and PWM drivers configured as
modules
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds few missing essential configs in the multi_v7_defconf,
absense of some configs like PINCTRL_APQ8064 would prevent the board from
getting access to serial.
cc: Kevin Hilman <khilman@kernel.org>
cc: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge "Broadcom defconfig changes for v4.4" from Florian Fainelli:
This pull request contains the following changes for the multi_v7_defconfig:
- Jon adds support for the NorthStar Plus SocS to the multi_v7_defconfig file
* tag 'arm-soc/for-4.4/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Add NSP to defconfig
* Remove now non-existent MACH_MARZEN from defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iUhT
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Defconfig Updates for v4.4" from Simon Horman:
* Remove now non-existent MACH_MARZEN from defconfigs
* tag 'renesas-defconfig-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Remove Marzen
ARM: shmobile: Remove Marzen from shmobile_defconfig
Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
CONFIG_VMSPLIT_2G was added to mx5_defconfig by commit 06965c39b4
("ARM i.MX5: update defconfig") to fix an issue where mx53 was not
detecting the full 1GiB memory range.
However, as explained by Russell King [1] the correct fix is to select
CONFIG_HIGHMEM.
imx_v6_v7_deconfig inherited such option from mx5_defconfig.
As imx_v6_v7_deconfig has CONFIG_HIGHMEM=y, we should no longer
select such non-standard CONFIG_VMSPLIT_2G option.
[1] http://www.spinics.net/lists/arm-kernel/msg137839.html
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add basic options to bootup on systemd based distros such as debian.
See http://cgit.freedesktop.org/systemd/systemd/tree/README#n38 for
more information.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Sync up the defconfig to savedefconfig output. easier to integrate
deltas as a result.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Loadable module support is enabled so we should allow unloading
modules too. This also allows lsmod to show values other than "-2" in
the "Used by" column.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Defconfig multi_v7 for Allwinner A10/A20 CAN driver
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Defconfig sunxi for Allwinner A10/A20 CAN driver
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This enables tca6424a GPIO expander driver that in turn enables
TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm.
In other words, it makes HDMI work on OMAP5 uevm.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Update the Tegra default configuration for the following features:
- expose hardware/virtual IRQ mapping via debugfs
- WM9712 audio/touch controller as found on Colibri T20
- sysfs interface for GPIOs
- NFS client support for NFS version 4
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As a result of rebuilding the configuration the following symbols are
removed:
- EXT4_FS: ext3 has finally been removed from the kernel. ext4
provides feature parity and can be used to mount ext3 filesystems.
EXT3_FS selects EXT4_FS.
- EXT3_DEFAULTS_TO_ORDERED: Removed as part of the ext3 filesystem
removal.
- IPV6: IPv6 is now built-in by default
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the Broadcom Northstar Plus SoC to the multi_v7_defconfig
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
One of the lines from PCF857x is connected to the vdd line of MMC1
in DRA74x and DRA72x EVMs and is modelled as a regulator. If PCF857x
is not made as built-in, the regulator_get in omap_hsmmc fails making
it difficult to use MMC1 as rootfs.
Make PCF857x built-in.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kill of the defconfig bits now when the marzen-reference board code is gone.
Based on work by Magnus Damm.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Kill of the defconfig bits now when the marzen-reference board code is gone.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is a collection of a few late fixes and other misc. stuff that
had dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates.
There's one conflict with drivers/cpufreq/exynos-cpufreq.c because
it's now been completely removed, but there were some fixes that hit
mainline in the meantime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=85Ck
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
...
PBIAS regulator is required for MMC module in OMAP2, OMAP3, OMAP4,
OMAP5 and DRA7 SoCs. Enable it here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
With the SA1100 and PXA RTC drivers be mutually exclusive and no
longer sharing hardware, PXA27x/PXA3xx platforms must use the PXA RTC
driver as the SA1100 platform device is no longer registered.
This change should be almost transparent to userspace. Former users of
pxa-rtc should be aware that 2 RTCs will be available on their kernels,
rtc0 being sa1100-rtc and rtc1 being pxa-rtc. Any userspace relying on
the fact that rtc0 was pxa-rtc should be fixed.
As a consequence:
- the first reboot after the switch will have the wrong time,
- on dual boot platform where the other OS programs some logic into the
sa1100 rtc IP, a lack of fix in userspace, ie. a kernel changing
sa1100-rtc thinking it is pxa-rtc could have dire consequence, such
as wiping the other OS data partition.
(Thanks to Robert Jarmik for help on the above commit text.)
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm for 4.3. Nouveau is
probably the biggest amount of changes in here, since it missed 4.2.
Highlights below, along with the usual bunch of fixes.
All stuff outside drm should have applicable acks.
Highlights:
- new drivers:
freescale dcu kms driver
- core:
more atomic fixes
disable some dri1 interfaces on kms drivers
drop fb panic handling, this was just getting more broken, as more locking was required.
new core fbdev Kconfig support - instead of each driver enable/disabling it
struct_mutex cleanups
- panel:
more new panels
cleanup Kconfig
- i915:
Skylake support enabled by default
legacy modesetting using atomic infrastructure
Skylake fixes
GEN9 workarounds
- amdgpu:
Fiji support
CGS support for amdgpu
Initial GPU scheduler - off by default
Lots of bug fixes and optimisations.
- radeon:
DP fixes
misc fixes
- amdkfd:
Add Carrizo support for amdkfd using amdgpu.
- nouveau:
long pending cleanup to complete driver,
fully bisectable which makes it larger,
perfmon work
more reclocking improvements
maxwell displayport fixes
- vmwgfx:
new DX device support, supports OpenGL 3.3
screen targets support
- mgag200:
G200eW support
G200e new revision support
- msm:
dragonboard 410c support, msm8x94 support, msm8x74v1 support
yuv format support
dma plane support
mdp5 rotation
initial hdcp
- sti:
atomic support
- exynos:
lots of cleanups
atomic modesetting/pageflipping support
render node support
- tegra:
tegra210 support (dc, dsi, dp/hdmi)
dpms with atomic modesetting support
- atmel:
support for 3 more atmel SoCs
new input formats, PRIME support.
- dwhdmi:
preparing to add audio support
- rockchip:
yuv plane support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
...
With recent MUSB changes we can now build in support for multiple
DMA implementations. So let's enable DMA by default to make life
easier for distro use.
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We mostly keep defconfigs updates on a separate branch due to their tendency
to conflict between platforms and this encourages more careful separation of
code changes and config changes.
Most updates here are minor tweaks, enabling new drivers for various platforms,
and so on. Renesas also removed one defconfig (marzen_defconfig).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsmT
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We mostly keep defconfigs updates on a separate branch due to their
tendency to conflict between platforms and this encourages more
careful separation of code changes and config changes.
Most updates here are minor tweaks, enabling new drivers for various
platforms, and so on. Renesas also removed one defconfig
(marzen_defconfig)"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: add TC2 PM support to multi_v7_defconfig
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
ARM: at91/defconfig: at91_dt: remove ARM_AT91_ETHER
ARM: at91/defconfig: at91_dt: enable DRM hlcdc support
ARM: at91: at91_dt_defconfig: enable ISI and ov2640 support
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
ARM: multi_v7_defconfig: Select MX6UL and MX7D
ARM: prima2_defconfig: enable build for hwspinlock
ARM: prima2_defconfig: enable build for RTC
ARM: prima2_defconfig: enable build for misc input
ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
ARM: prima2_defconfig: fix the outdated defconfig
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
ARM: defconfig: orion5x: add DT support
ARM: qcom_defconfig: Enable options for KS8851 ethernet
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's PWM driver
...
This is the usual large batch of DT updates. Lots and lots of smaller
changes, some of the larger ones to point out are:
- Rockchip veyron (Chromebook) support, as well as several other new boards
- DRM support on Atmel AT91SAM9N12EK
- USB additions on some Allwinner platforms
- Mediatek MT6580 support
- Freescale i.MX6UL support
- Cleanups for Renesas shmobile platforms
- Lots of added devices on LPC18xx
- Lots of added devices and boards on UniPhier
There's also some dependent code added here, in particular some branches
that are primarily merged through the clock tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=D2Pm
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"Ladies and gentlemen, we proudly announce to you the latest branch of
ARM device tree contents for the mainline kernel. Come and see, come
and see!
No less than twentythree thousand lines of additions! Just imagine the
joy you will have of using your mainline kernel on newly supported
hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or
UniPhier hardware!
For those of you feeling less adventurous, added hardware support on
platforms such as TI DM814x and Gumstix Overo platforms might be more
of your liking.
We've got something for everyone here!
Ahem. Cough. So, anyway...
This is the usual large batch of DT updates. Lots and lots of smaller
changes, some of the larger ones to point out are:
- Rockchip veyron (Chromebook) support, as well as several other new boards
- DRM support on Atmel AT91SAM9N12EK
- USB additions on some Allwinner platforms
- Mediatek MT6580 support
- Freescale i.MX6UL support
- cleanups for Renesas shmobile platforms
- lots of added devices on LPC18xx
- lots of added devices and boards on UniPhier
There's also some dependent code added here, in particular some
branches that are primarily merged through the clock tree"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits)
ARM: tegra: Add gpio-ranges property
ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
ARM: tegra: Add Tegra124 PMU support
ARM: tegra: jetson-tk1: Add GK20A GPU DT node
ARM: tegra: venice2: Add GK20A GPU DT node
ARM: tegra: Add IOMMU node to GK20A
ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
ARM: tegra: Add entries for cpufreq on Tegra124
ARM: tegra: Enable the DFLL on the Jetson TK1
ARM: tegra: Add the DFLL to Tegra124 device tree
ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes
ARM: dts: rockchip: correct regulator power states for suspend
ARM: dts: rockchip: correct regulator PM properties
ARM: dts: vexpress: Use assigned-clock-parents for sp810
pinctrl: tegra: Only set the gpio range if needed
arm: boot: dts: am4372: add ARM timers and SCU nodes
ARM: dts: AM4372: Add the am4372-rtc compatible string
ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
...
A large cleanup branch this release, with a healthy 10k negative line delta.
Most of this is removal of legacy (non-DT) support of shmobile
platforms. There is also removal of two non-DT platforms on OMAP,
and the plat-samsung directory is cleaned out by moving most of the
previously shared-location-but-not-actually-shared files from there to
the appropriate mach directories instead.
There are other sets of changes in here as well:
- Rob Herring removed use of set_irq_flags under all platforms and
moved to genirq alternatives
- A series of timer API conversions to set-state interface
- ep93xx, nomadik and ux500 cleanups from Linus Walleij
- __init annotation fixes from Nicolas Pitre
+ a bunch of other changes that all add up to a nice set of cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=acy4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"A large cleanup branch this release, with a healthy 10k negative line
delta.
Most of this is removal of legacy (non-DT) support of shmobile
platforms. There is also removal of two non-DT platforms on OMAP, and
the plat-samsung directory is cleaned out by moving most of the
previously shared-location-but-not-actually-shared files from there to
the appropriate mach directories instead.
There are other sets of changes in here as well:
- Rob Herring removed use of set_irq_flags under all platforms and
moved to genirq alternatives
- a series of timer API conversions to set-state interface
- ep93xx, nomadik and ux500 cleanups from Linus Walleij
- __init annotation fixes from Nicolas Pitre
+ a bunch of other changes that all add up to a nice set of cleanups"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits)
ARM/fb: ep93xx: switch framebuffer to use modedb only
ARM: gemini: Setup timer3 as free running timer
ARM: gemini: Use timer1 for clockevent
ARM: gemini: Add missing register definitions for gemini timer
ARM: ep93xx/timer: Migrate to new 'set-state' interface
ARM: nomadik: push accelerometer down to boards
ARM: nomadik: move l2x0 setup to device tree
ARM: nomadik: selectively enable UART0 on boards
ARM: nomadik: move hog code to use DT hogs
ARM: shmobile: Fix mismerges
ARM: ux500: simplify secondary CPU boot
ARM: SAMSUNG: remove keypad-core header in plat-samsung
ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
ARM: SAMSUNG: local backlight header in mach-s3c64xx
ARM: SAMSUNG: local ata-core header in mach-s3c64xx
ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
ARM: SAMSUNG: local spi-core header in mach-s3c24xx
ARM: SAMSUNG: local nand-core header in mach-s3c24xx
...
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xW1n
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.3-rc1
Enable the GK20A GPU (via the Nouveau driver) and CPU frequency scaling
on Tegra124.
* tag 'tegra-for-4.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Update multi_v7_defconfig
ARM: tegra: Update default configuration
Signed-off-by: Olof Johansson <olof@lixom.net>
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=0McP
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung defconfig updates for v4.3
- for exynos_defconfig
: enable SND_SOC_ODROIDX2 and SND_SIMPLE_CARD for
Odroid-XU3 to use max98090 audio codec
: enalbe SENSORS_NTC_THERMISTOR for Peach boards
: enable cpufreq-dt driver with ONDEMAND governor
for Exynos SoCs 3250, 4210, 4212, 4412 and 5250
- for multi_v7_defconfig:
: remove SAMSUNG_USB2PHY and SAMSUNG_USB3PHY are not used now
: enable SENSORS_NTC_THERMISTOR and EXYNOS_ADC for Peach boards
: enable REGULATOR_MAX77802 for Peach boards
* tag 'samsung-defconfig-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable cpufreq-dt driver
ARM: multi_v7_defconfig: Enable max77802 regulator
ARM: exynos_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Enable NTC Thermistors support
ARM: multi_v7_defconfig: Remove old Samsung USB PHY configs
ARM: exynos_defconfig: Enable CONFIG_SND_SOC_ODROIDX2 for Odroid-XU3
Signed-off-by: Olof Johansson <olof@lixom.net>
Without this, the multi_v7_defconfig kernel cannot boot all CPUs
nor do deep cpuidle power saving on a TC2 board.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Dee7
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.3-rc1
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/bridge: Put Kconfig entries in a separate menu
drm/panel: Add support for LG LG4573 480x800 4.3" panel
drm/panel: Add display timing for Okaya RS800480T-7X0GP
of: Add Okaya Electric America vendor prefix
drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
drm/panel: simple: Add support for AUO B080UAN01
drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
drm/bridge: Add vendor prefixes
drm/panel: Add Samsung prefix to panel drivers
drm/exynos: Remove PTN3460 dependency
Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.
v2: fix object name for dw-hdmi (Fabio Estevam)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Tegra-specific configuration options to multi_v7_defconfig:
* HDA controller and codec support
* Watchdog support
* Nouveau (for GK20A GPU) support
Signed-off-by: Thierry Reding <treding@nvidia.com>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
CONFIG_ARM_AT91_ETHER doesn't exist anymore, both drivers have been merged
in the macb driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.
Enable it along with default ondemand governor to conserve the energy,
reduce temperature while maintaining acceptable performance.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 based Peach Pit and Exynos5800 based Peach Pi Chromebooks
use the Maxim max77802 Power Management IC (PMIC). This PMIC has besides
other devices, a set of regulators that can be controller over I2C.
Commit f3caa529c6 ("ARM: multi_v7_defconfig: Enable max77802 regulator,
rtc and clock drivers") was supposed to enable the config option for the
regulator driver as a module but the final version that landed did not
include this. The commit was modified and the REGULATOR_MAX77802 removed
since it was thought to be useless.
Unfortunately that's not the case for the mentioned reason above so this
patch enables the needed Kconfig option.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[kgene@kernel.org: fixed ordering according to make savedefconfig]
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SkuD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.3
Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig
* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE
Signed-off-by: Olof Johansson <olof@lixom.net>
Improve dt support for orion5x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlW7QLAACgkQCwYYjhRyO9VAqgCePD1+poLPe2yvEG0tlVO+Riq4
DLMAn3OoOO5UaISBXMBu/fPsd80UGDbH
=Yrv4
-----END PGP SIGNATURE-----
Merge tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu config changes for v4.3 (part #2)
Improve dt support for orion5x
* tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu:
ARM: defconfig: orion5x: add DT support
Signed-off-by: Olof Johansson <olof@lixom.net>
Add Atmel-isi and ov2640 driver in defconfig
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: make SOC_CAMERA_OV2640 selected as a module]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable fixed voltage regulator in shmobile_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVuW5RAAoJENfPZGlqN0++xzQP/18bRnydoBgD9+ccsYUeCSwo
hXwF8PGcutUpOJ5SUS9o80a0jVn06p06IqU2BjJ/IIJcF3PNBlHbEpIBLvC0DFVW
wJ1+FEuwWVx3MnGzLDCD/yZB4uwQ+a5MGlc5CG6eHuIVCshhdCw6fHozJphF89yf
N+i3YNxtCshosVpjrSowrbxmxzutgbY1/krlYjVeH5eNjIH+R11hlzrkxAhxHGhH
o93IGFptB92r2Uygg1uu+dxgsexLRm4QgI5EibWFifoj4+6PB9eJSIiZ4rBWnQY8
oVzzu7WpsIA6TS+QqUobBJLhMxpdICkmyWo4ngUs3HdfoEK7uLfhNWYzHtlmhbCT
3vT90Tb3cnWmkae3C7LQXFpyhpq90F0NyLhZEYFB98qCe32u/s8NhbOi7znAUR3k
82ZZenMV0ykWdmrQoRWmuomfrsmLhJJPKKiFdd4Wa0iabKTDdKPTPkZRguwr9lb0
rlg+MTFq5S4CowZ3TKhTKVvgTAiJYQjupp7rha/mINiVJQmWFnKz98IqQ+OYD3cf
SgUDDFmalTSewD9998/Tm8Ifj64x+UAvxd34N9Af1fdcIbde6/Lu2poEMnID7fIL
rFGnj2r37eDRpQlCZoZ1mx/YmMtR2QODojRhZJ3TpkjLp6M74xKI/ihydE7cGOAF
VwqelnZQxUB8JjFxIUum
=9Yan
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Second Round of Renesas ARM Based SoC Defconfig Updates for v4.3
* Enable fixed voltage regulator in shmobile_defconfig
* tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
System) drivers by default. EXTCON is needed by the updated sun4i USB
PHY driver.
While at it, enable FHANDLE, which is needed by systemd and newer
versions of udev. Also enable CGROUPS for systemd.
And get rid of POWER_RESET, as the sun6i power reset driver has been
removed in favor of proper sun6i watchdog support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable built-in support for its driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable module support for its driver
and also for the needed Exynos ADC driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The old drivers/usb/phy/phy-samsung-usb{2,3} are now deleted since
were replaced by newer drivers that use the Generic PHY framework
but their Kconfig options were left over in multi_v7_defconfig.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable
sound on Odroid-XU3 board using the max98090 audio codec.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This is selected by MACH_MARZEN which is enabled in shmobile_defconfig,
however, MACH_MARZEN is going away along with the board code it enables.
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Let MX6UL and MX7D SoCs be selected by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
this patch is againest v4.2-rc1, by doing:
$ make ARCH=arm prima2_defconfig
$ make ARCH=arm savedefconfig
$ cp defconfig arch/arm/configs/prima2_defconfig
Signed-off-by: Barry Song <Baohua.Song@csr.com>
It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the RPM and RPM regulator drivers as well as the KS8851
ethernet driver so that ethernet works on MSM8960 CDP.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
SPI NOR, CPTS, touchscreen and ADC used on am335x, am437x
and ra7 devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jALL
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "defconfig changes for v4.3" from Tony Lindgren:
Few defconfig changes for omap2plus_defconfig to enable
SPI NOR, CPTS, touchscreen and ADC used on am335x, am437x
and ra7 devices.
* tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR
ARM: omap2plus_defconfig: enable support for TI CPTS
ARM: omap2plus_defconfig: enable support for TI touchscreen
ARM: omap2plus_defconfig: enable support for TI ADC
Signed-off-by: Olof Johansson <olof@lixom.net>
resolution timers, and to by default enable and compile
all board variants now that we can have a single kernel,
and enable all EP93xx-specific drivers that sit in various
sites across the kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ebxc
-----END PGP SIGNATURE-----
Merge tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig
Merge "EP93xx defconfig changes" from Linus Walleij:
This updates the EP93xx defconfig to use NO_HZ and high
resolution timers, and to by default enable and compile
all board variants now that we can have a single kernel,
and enable all EP93xx-specific drivers that sit in various
sites across the kernel.
* tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: ep93xx: add framebuffer to the defconfig
ARM: ep93xx: add DMA engine to the defconfig
ARM: ep93xx: add GPIO I2C to defconfig
ARM: ep93xx: add LEDs and triggers to defconfig
ARM: ep93xx: enable SIM.ONE MMC/SD hardware
ARM: ep93xx: enable all boards in the EP93xx defconfig
ARM: ep93xx: activate NO_HZ and high-res timers
Signed-off-by: Olof Johansson <olof@lixom.net>
update mvebu_v7_defconfig with features needed for Armada 388 GP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlWoKuAACgkQCwYYjhRyO9XPuACfbqntlfTFA3ZMSchcFfWTuv9B
vfUAn2bvhZGk8ug2XTumCwDXlnkfovND
=VRBf
-----END PGP SIGNATURE-----
Merge tag 'mvebu-config-4.3-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "ARM: mvebu: config changes for v4.3" from Gregory Clement:
mvebu config changes for v4.3 (part #1)
update mvebu_v7_defconfig with features needed for Armada 388 GP
* tag 'mvebu-config-4.3-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP
Signed-off-by: Olof Johansson <olof@lixom.net>
The EP93xx SoC has a framebuffer driver, let's add this to the
defconfig so we can have graphics working out of the box.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Several boards can make use of the DMA engine on the EP93xx
so let's enable this by default in the defconfig.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some of the EP93xx boards have I2C devices on bit-banged GPIO
I2C, so add this to the defconfig.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The EP93xx has two designated LEDs (not always connected): a
green and a red one. These are registered in the core, so let's
enable the driver and some triggers.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SIM.ONE has a MMC card connected to the SPI host. This card
usually hosts an EXT4 root file system. Enable these options in
the defconfig so the default ompiled kernel will work
out-of-the-box.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With PATCH_PHYS_TO_VIRT we can support all EP93xx variants
in a single image, so enable all board variants in the defconfig
for simplicity and build coverage.
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Let's set the EP93xx to NO_HZ mode and activate the high-res
timers now that we have GENERIC_CLOCKEVENTS.
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now when the Marzen legacy board code is removed also
get rid of the marzen_defconfig file. Existing users
shall move over to shmobile_defconfig.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
M25P80 driver provides support for most common SPI NOR devices.
These devices are commonly found on TI EVMs for AM437x and DRA7x
SoCs.
Enable support for this driver in defconfig for omap2plus devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
CPTS module of CPSW IP enables timestamp synchronization
using PTP. Enable CPTS feature of CPSW driver.
Available on AM335x, AM437x and DRA7x SoCs.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable support for on-chip resistive touchscreen m found on AM335x and
AM437x devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable support for on-chip ADC found on AM335x and
AM437x devices.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch enables Renesas DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables DPCM related sound card.
It is used for...
- Sampline rate convert
- CTU/MIXer
Note: you need to enable these settings on DTS file
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
More and more boards are moving to have audio support via simple-card.
At the same time enable options needed for most am335x and am43xx board for
audio support: McASP and TLV320AIC3X codecs.
The later two has been selected by the CONFIG_SND_AM33XX_SOC_EVM option, but
the aim is to convert all boards to use simple card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2lyB
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Merge "Renesas ARM Based SoC Cleanup for v4.3" from Simon Horman:
* Remove non-multiplatform code from timer
* Remove CONFIG_ARCH_SHMOBILE_MULTI check in setup-rcar-gen2.c
as it is always true
* Remove legacy (non-multiplatform) support for both sh73a0/kzm9g and
r8a7740/armadillo800eva
* Move to_rmobile_pd from header to source file where it is used
* Use BIT() macro instead of open coding in r-mobile PM code
* r8a7779: Remove usage of GENPD_FLAG_PM_CLK flag which has no effect
* tag 'renesas-cleanup-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: timer: r8a73a4 and r8a7790 are multi-platform only
ARM: shmobile: R-Car Gen2: CONFIG_ARCH_SHMOBILE_MULTI is always set
ARM: shmobile: Remove obsolete zboot support
ARM: shmobile: R-Mobile: Remove legacy PM Domain code
ARM: shmobile: Remove unused dma-register.h
ARM: shmobile: Remove legacy SoC code for R-Mobile A1
ARM: shmobile: Drop r8a7740-armadillo800eva.dtb for legacy builds
ARM: shmobile: Remove legacy armadillo800eva_defconfig
ARM: shmobile: Remove legacy board code for Armadillo-800 EVA
ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5
ARM: shmobile: Drop sh73a0-kzm9g.dtb for legacy builds
ARM: shmobile: Remove legacy kzm9g_defconfig
ARM: shmobile: Remove legacy board code for KZM-A9-GT
ARM: shmobile: r8a7779: Remove GENPD_FLAG_PM_CLK flag
ARM: shmobile: R-Mobile: Use BIT() macro instead of open coding
ARM: shmobile: R-Mobile: Move to_rmobile_pd from header to source file
Signed-off-by: Olof Johansson <olof@lixom.net>
The UniPhier on-chip UART driver was merged into the mainline by
commit 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial
driver").
Enable it from multi_v7_defconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
build in snvs powerkey
build in syscon power off support
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The old warp board revision had hardware issues that prevented
the RTS/CTS lines to work with the Bluetooth module.
Tha latest rev1.12 fixes this problem, so now we should better use
CONFIG_BT_HCIUART_H4 instead, as it provides a better throughput than
the CONFIG_BT_HCIUART_3WIRE option.
Suggested-by: Arthur Lambert <arthur@dreem.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m0CY
-----END PGP SIGNATURE-----
Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
The Armada 388 GP board has the following hardware features that were
not enabled in mvebu_v7_defconfig:
* An AT24 I2C EEPROM (also used by armada-xp-lenovo-ix4-300d)
* A PCA9555 I2C GPIO expander
* Several fixed regulators
Therefore, this commit adds the necessary options to mvebu_v7_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The legacy board code for Armadillo-800 EVA has been removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The legacy board code for KZM-A9-GT has been removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that we have simplefb support, we can enable it in our defconfig. Also
enable the framebuffer console, so that we are sure that we actually get
something displayed in any case.
And while we're at it, enable the module support.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Commit b2b3a8b934 ("power/reset: Remove sun6i reboot driver") removed
the sun6i reboot driver. But sunxi_defconfig and multi_v7_defconfig
still contain the symbol CONFIG_POWER_RESET_SUN6I that was deprecated
by that commit, so remove it.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Broadcom NAND driver is used by brcmstb, bcm63xx, bcm5301x and
Cygnus/iProc under mach-bcm, this is enough critical mass to enable it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q6ks
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' into test-merge
ARM: SoC: defconfig updates for v4.2
We keep collecting defconfig updates in a separate branch mostly to encourage
people to handle them separately and avoid conflicts between different topics.
Most of these are enablement of new SoCs, boards or drivers that have
come in, or minor config refreshes due to reorderings in Kconfig
files, etc. I.e. mostly minor churn of various kinds.
Conflicts: None
# gpg: Signature made Wed Jun 24 21:32:27 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
Our SoC branch usually contains expanded support for new SoCs and
other core platform code. Some highlights from this round:
- sunxi: SMP support for A23 SoC
- socpga: big-endian support
- pxa: conversion to common clock framework
- bcm: SMP support for BCM63138
- imx: support new I.MX7D SoC
- zte: basic support for ZX296702 SoC
Conflicts:
arch/arm/mach-socfpga/core.h
Trivial remove/remove conflict with our cleanup branch.
Resolution: remove both sides
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVi4RMAAoJEFk3GJrT+8Zl6/kP/1Rv9O++1Kxua6R54Og6AF1J
0miFr2fnUrUWUYg/NVbseRH5bBe6N6ir3SQMfde8W2/QibEjOoEwSwrle+mC/eiq
CE0x0gtyRvXMrMU/FWkOvbmmw9uv5oz1z3IHZV6AiecNuSMLUBPfamryikQ8C+d1
O/QZtX543tJQJDOBihO5cuhoVVM37UX0unNmqGsyswlyqTPF8FxcIJAYVNtnxjmj
AFaOB0nDJKLKFTiX2Ype2wOxxJX1lrLatNo4W4T+YaaK+i1uCOhgTdSN+n49K7YA
KNDFEgZFQqT8VMJyG+eJVeYF+cI7yWQ7lBzIftPUjPk/7+dIHBjWPz2QdjVz3U38
kxncf4S9xGAF5G2rcKe4mFrfT3Y8QLWQpA/jFs06yLwW1O3Hlfq3DzMdGNcF7hth
17LOP8namn9+NepZEp/vAlFzRRypxWWtbkPNBIItkImC6zn0IiGjBy50DE1io27W
hmQcnMb7d+0wWl2Y8OmR2lZSB97JiRZkRYMCVHVt+0zGJzp4prLvl9wbjh1VXkPv
ERCDJ9nCmZsl7ZVmIXMI7KNXYuPNp7R/QAzCvuSUueswF0qxTAQ0VSSBwRMqvQsQ
UUNC6p63VnjUeMUdn2EBsUQZ0Uqw3t2U5TtvooHNt9FkiGsSpwjWrvVD+LItaPoJ
GPeeJrJaYQsDvTrO8wjU
=ZtPK
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' into test-merge
ARM: SoC: platform support for v4.2
Our SoC branch usually contains expanded support for new SoCs and
other core platform code. Some highlights from this round:
- sunxi: SMP support for A23 SoC
- socpga: big-endian support
- pxa: conversion to common clock framework
- bcm: SMP support for BCM63138
- imx: support new I.MX7D SoC
- zte: basic support for ZX296702 SoC
Conflicts:
arch/arm/mach-socfpga/core.h
Trivial remove/remove conflict with our cleanup branch.
Resolution: remove both sides
# gpg: Signature made Wed Jun 24 21:32:12 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
# Conflicts:
# arch/arm/mach-socfpga/core.h
