'hostif_mib_set_request_bool' function receives a bool as value and
send the received value with MIB_VALUE_TYPE_BOOL type. There is
one case where the value passed is not a boolean one but
'MCAST_FILTER_PROMISC' which is '2'. Call hostif_mib_set_request_int
instead for related multicast enumeration. This changes original
code behaviour but seems to be the right way to do this.
Fixes: 8ce76bff0e ("staging: ks7010: add new helpers to achieve mib set request and simplify code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpu_to_*() functions already have a cast to u* built in,
so the cast is never required. Review and remove all of
them along the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 6d6612deaf ("staging: ks7010: Remove unnecessary limit
checks"), this define is not used anywhere. Remove it as well.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_sme_set_pmksa function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_sme_set_rsn function
which are being used together with cpu_to_le16 using uint16_t
as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameters 'failure_count' and 'timer' was declared as unsigned
short and then there was being casted to u16 inside cpu_to_le16
to make the assignation. Just declare them as 'u16' and avoid
casting at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function hostif_bss_scan_request parameters 'scan_ssid' and
'scan_ssid_len' are declared as uint8_t. Change them to be 'u8'
instead which is preferred. Also update two casts inside the same
function to use 'u32' instead of 'uint32_t'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_phy_information_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_infrastructure_set_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_ps_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are soem assignments inside init_request function which
are being used together with cpu_to_le16 using uint16_t as cast
type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use u16 as cast type in hostif_start_request function replacing
uint16_t which was being used.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ks_wlan_cap there is a cast to uint16_t to use cpu_to_le16
with variable 'capability' which is already defined as u16.
Avoid this cast to clean code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Second parameter 'mib_attribute' in function hostif_mib_get_request
is declared as unsigned long and inside the function a cast to uint32_t
is being used. Just pass a u32 instead and avoid the casting.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some castings inside the function hostif_data_request
which are being using with uint16_t type. Fields which have being
assigned are declared as u16. So update casts types to u16 in all
of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Field 'counter' in mic_failure struct is being assigned casting
value using uint16_t. Replace with u16 which is the correct type
of the field and the preferred one.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'wakeup_count' in 'ks_wlan_private' struct is declared
as 'uint' which is not a standard type. Replace in favour of
'unsigned int' which it is.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_rx_gain a cast to uint8_t is being used
to assign reception gain. 'rx_gain' field is defined as u8 so
replace the cast to the correct type
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_tx_gain a cast to uint8_t is being used
to assign transmission gain. 'tx_gain' field is defined as u8 so
replace the cast to the correct type.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some casts to uint8_t in ks_wlan_set_rate function to
assign values of the bitrate. Just change it to u8 which is the one
defined for the field 'body' of the struct which is in use.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter 'size' in function ks_wlan_hw_rx is declared as
uint16_t and can be declared as size_t which makes more sense.
It is being passed to hif_align_size function which also expects
a size_t as parameter so just change its type. Also update two
casts in calls to this function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Header size and event fields of header are declared
as __le16 and being casted using uint16_t in cpu_to_le16.
Change cast to use preferred u16.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'byte' in ks7010_upload_firmware function is declared
as unsigned char and is only being used to read hardware
registers which are expected in sdio_read_byteb function as u8.
Change 'byte' variable type to u8 which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was two blank lines between definitions and statements
in ks7010_upload_firmware function. Remove one of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WPA_CAPABILITY_PREAUTH definition is not being used at all so
just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uwrq is an unsigned 32-bit integer, it cannot be less than zero.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit changes types for local variables declared in
hostif_phy_information_confirm function to use the preferred
one 'u8' and 'u32'. Its values are get using get_byte and get_dword
functions which returns 'u8' and 'u32' so it makes sense.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'result_code' is declared as unsigned int in
hostif_bss_scan_confirm function. Its value is got calling
get_dword which returns an 'u32' so change its type to u32
which is preferred
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'connect_code' is declared as unsigned short in
hostif_connect_indication function. Its value is got calling
get_word which returns an 'u16' so change its type to u16
which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'auth_type' is declared as unsigned short in
hostif_data_indication function. Its value is got calling get_word
which returns an 'u16' so change its type to u16 which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'event' is declared as unsigned short in hostif_event_check
function. Its value is got calling get_word which returns an 'u16'
so change its type to u16 which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit simplify conditional paths in LOCAL_EEPROM_SUM case
inside hostif_mib_get_confirm function. It change logic to handle
invalid values first and assign good ones at the end if it is the
case.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit changes custom implementation of CIRC_CNT_TO_END.
Just use the linux kernel header one to simplify code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit refactor a bit ks_get_wireless_stats using
ternary operator for return code. It also change a comment
to use preferred style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit refactors ks_wlan_set_mlme function changing
switch-case block for more simple if paths improving
readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle invalid values first and assign good ones at the
end if it is the case. This makes code simplier.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit refactors ks_wlan_set_sleep_mode function
avoiding to use switch-case statement ans using simple
if logic to handle invalid values first. This simplifies
data paths as well as improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of use memcpy for copying ethernet addresses, use
ether_addr_copy that do the same.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy to copy ethernet address instad of using
memcpy in ks_wlan_set_mac_address function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit refactor hostif_sme_power_mgmt_set avoiding to
use switch-case statement and simplifying data paths. This
improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameters for hostif_power_mgmt_request are declared as unsigned
long and then are forced to be change to be u32. Also the caller
declares explicitly unsigned long parameters just to assign them
and pass into the function. Change types for those to be u32 instead
so no conversion is needed at all and code gets more clear.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit make use of two introduced local variables
to make more readable code of hostif_sme_set_rsn function.
It just assign those local variables in different cases
where are needed and extract common code to assign them
at the end.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add blank line after definitions in hostif_aplist_init function
to fix a checkpatch script complain about that.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some checkpatch complains about long lines in some
parts of the code. It also fix some lines where spaces
instead of tabs were inserted.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In all functions related with requests to the device the same
patter in used and is also adding a comment to make clear the
intention of the code. Just factor out the pattern into a new
send_request_to_device function to improve readability and make
clear code intention.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WLAN_EID_DS_PARAMS case inside switch case is just doing nothing
and it is located inside other cases. There is a place inside
the switch with other don't do anything cases are located. Move
this to that place.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit make use of ether_addr_copy to copy ethernet
address instead of copy it using memcpy.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy kernel function to copy an ethernet address
instead of a simple memcpy with ETH_ALEN size.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Field rsn_enabled included in wpa_status struct is declared as
unsigned int but it is only be set using 0 and 1 values and
in conditional if code is just being used as a boolean. Change
its type to be a boolean.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
