The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.
P1 P2
Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.
Allocate the pages from the
movable zone.
Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.
Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.
Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.
The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.
With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.
This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).
[1]: https://patchwork.kernel.org/patch/11696389/
Fixes: 5f8dcc2121 ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones. Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.
The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.
The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.
The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall. This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order. With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.
This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.
In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout
cma: Reserved 256 MiB at 0x0000000030000000
Zone ranges:
DMA [mem 0x0000000000000000-0x000000002fffffff]
Normal empty
HighMem [mem 0x0000000030000000-0x000000003fffffff]
would result in 0 lowmem_reserve for the DMA zone. This would allow
userspace to deplete the DMA zone easily.
Funnily enough
$ cat /proc/sys/vm/lowmem_reserve_ratio
would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.
This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.
Fixes: bc22af74f2 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "THP prep patches".
These are some generic cleanups and improvements, which I would like
merged into mmotm soon. The first one should be a performance improvement
for all users of compound pages, and the others are aimed at getting code
to compile away when CONFIG_TRANSPARENT_HUGEPAGE is disabled (ie small
systems). Also better documented / less confusing than the current prefix
mixture of compound, hpage and thp.
This patch (of 7):
This removes a few instructions from functions which need to know how many
pages are in a compound page. The storage used is either page->mapping on
64-bit or page->index on 32-bit. Both of these are fine to overlay on
tail pages.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-1-willy@infradead.org
Link: http://lkml.kernel.org/r/20200629151959.15779-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a well-defined standard migration target callback. Use it
directly.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-8-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop the repeated word "them" and "that".
Change "the the" to "to the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200801173822.14973-10-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, memalloc_nocma_{save/restore} API that prevents CMA area
in page allocation is implemented by using current_gfp_context(). However,
there are two problems of this implementation.
First, this doesn't work for allocation fastpath. In the fastpath,
original gfp_mask is used since current_gfp_context() is introduced in
order to control reclaim and it is on slowpath. So, CMA area can be
allocated through the allocation fastpath even if
memalloc_nocma_{save/restore} APIs are used. Currently, there is just
one user for these APIs and it has a fallback method to prevent actual
problem.
Second, clearing __GFP_MOVABLE in current_gfp_context() has a side effect
to exclude the memory on the ZONE_MOVABLE for allocation target.
To fix these problems, this patch changes the implementation to exclude
CMA area in page allocation. Main point of this change is using the
alloc_flags. alloc_flags is mainly used to control allocation so it fits
for excluding CMA area in allocation.
Fixes: d7fefcc8de (mm/cma: add PF flag to force non cma alloc)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Link: http://lkml.kernel.org/r/1595468942-29687-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we are in the interrupt context, it is irrelevant to the current task
context. If we use current task's mems_allowed, we can be fair to alloc
pages in the fast path and fall back to slow path memory allocation when
the current node(which is the current task mems_allowed) does not have
enough memory to allocate. In this case, it slows down the memory
allocation speed of interrupt context. So we can skip setting the
nodemask to allow any node to allocate memory, so that fast path
allocation can success.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/20200706025921.53683-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MIGRAGE_TYPES is used to be the mark of end and there are at most 3
elements for the one dimension array.
Reduce to 3 to save little memory.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/20200625231022.18784-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel_init_free_pages() will use memset() on s390 to clear all pages from
kmalloc_order() which will override KASAN redzones because a redzone was
setup from the end of the allocation size to the end of the last page.
Silence it by not reporting it there. An example of the report is,
BUG: KASAN: slab-out-of-bounds in __free_pages_ok
Write of size 4096 at addr 000000014beaa000
Call Trace:
show_stack+0x152/0x210
dump_stack+0x1f8/0x248
print_address_description.isra.13+0x5e/0x4d0
kasan_report+0x130/0x178
check_memory_region+0x190/0x218
memset+0x34/0x60
__free_pages_ok+0x894/0x12f0
kfree+0x4f2/0x5e0
unpack_to_rootfs+0x60e/0x650
populate_rootfs+0x56/0x358
do_one_initcall+0x1f4/0xa20
kernel_init_freeable+0x758/0x7e8
kernel_init+0x1c/0x170
ret_from_fork+0x24/0x28
Memory state around the buggy address:
000000014bea9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000014bea9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>000000014beaa000: 03 fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
^
000000014beaa080: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
000000014beaa100: fe fe fe fe fe fe fe fe fe fe fe fe fe fe
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20200610052154.5180-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After previous cleanup, the end_bitidx is not necessary any more.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20200623124201.8199-4-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to commit e58469bafd ("mm: page_alloc: use word-based accesses for
get/set pageblock bitmaps"), pageblock bitmap is accessed with word-based
access. This operation could be simplified a little.
Intuitively, if we want to get a bit range [start_idx, end_idx] in a word,
we can do like this:
mask = (1 << (end_bitidx - start_bitidx + 1)) - 1;
ret = (word >> start_idx) & mask;
And also if we want to set a bit range [start_idx, end_idx] with flags, we
can do the same by just shift start_bitidx.
By doing so we reduce some instructions for these two helper functions:
Before Patched
set_pfnblock_flags_mask 209 198(-5%)
get_pfnblock_flags_mask 101 87(-13%)
Since the syntax is changed a little, we need to check the whole 4-bit
migrate_type instead of part of it.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20200623124201.8199-3-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value calculation is the same both for SPARSEMEM or not.
Just take it out.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20200623124201.8199-2-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nr_free_pagecache_pages() isn't used outside page_alloc.c anymore - and
the name does not really help to understand what's going on. Let's
open-code it instead and add a comment.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Huang Ying <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/20200619132410.23859-3-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The global variable "vm_total_pages" is a relic from older days. There is
only a single user that reads the variable - build_all_zonelists() - and
the first thing it does is update it.
Use a local variable in build_all_zonelists() instead and remove the
global variable.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/20200619132410.23859-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When boosting is enabled, it is observed that rate of atomic order-0
allocation failures are high due to the fact that free levels in the
system are checked with ->watermark_boost offset. This is not a problem
for sleepable allocations but for atomic allocations which looks like
regression.
This problem is seen frequently on system setup of Android kernel running
on Snapdragon hardware with 4GB RAM size. When no extfrag event occurred
in the system, ->watermark_boost factor is zero, thus the watermark
configurations in the system are:
_watermark = (
[WMARK_MIN] = 1272, --> ~5MB
[WMARK_LOW] = 9067, --> ~36MB
[WMARK_HIGH] = 9385), --> ~38MB
watermark_boost = 0
After launching some memory hungry applications in Android which can cause
extfrag events in the system to an extent that ->watermark_boost can be
set to max i.e. default boost factor makes it to 150% of high watermark.
_watermark = (
[WMARK_MIN] = 1272, --> ~5MB
[WMARK_LOW] = 9067, --> ~36MB
[WMARK_HIGH] = 9385), --> ~38MB
watermark_boost = 14077, -->~57MB
With default system configuration, for an atomic order-0 allocation to
succeed, having free memory of ~2MB will suffice. But boosting makes the
min_wmark to ~61MB thus for an atomic order-0 allocation to be successful
system should have minimum of ~23MB of free memory(from calculations of
zone_watermark_ok(), min = 3/4(min/2)). But failures are observed despite
system is having ~20MB of free memory. In the testing, this is
reproducible as early as first 300secs since boot and with furtherlowram
configurations(<2GB) it is observed as early as first 150secs since boot.
These failures can be avoided by excluding the ->watermark_boost in
watermark caluculations for atomic order-0 allocations.
[akpm@linux-foundation.org: fix comment grammar, reflow comment]
[charante@codeaurora.org: fix suggested by Mel Gorman]
Link: http://lkml.kernel.org/r/31556793-57b1-1c21-1a9d-22674d9bd938@codeaurora.org
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/1589882284-21010-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh noted that task_capc() could use unlikely(), as most of the time
there is no capture in progress and we are in page freeing hot path.
Indeed adding unlikely() produces assembly that better matches the
assumption and moves all the tests away from the hot path.
I have also noticed that we don't need to test for cc->direct_compaction
as the only place we set current->task_capture is compact_zone_order()
which also always sets cc->direct_compaction true.
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@googlecom>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Li Wang <liwang@redhat.com>
Link: http://lkml.kernel.org/r/4a24f7af-3aa5-6e80-4ae6-8f253b562039@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().
Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.
Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.
Also remove no longer required HAVE_MEMORY_PRESENT configuration option.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the kernel stack is being accounted per-zone. There is no need
to do that. In addition due to being per-zone, memcg has to keep a
separate MEMCG_KERNEL_STACK_KB. Make the stat per-node and deprecate
MEMCG_KERNEL_STACK_KB as memcg_stat_item is an extension of
node_stat_item. In addition localize the kernel stack stats updates to
account_kernel_stack().
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200630161539.1759185-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to prepare for per-object slab memory accounting, convert
NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes.
To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and
NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB).
Internally global and per-node counters are stored in pages, however memcg
and lruvec counters are stored in bytes. This scheme may look weird, but
only for now. As soon as slab pages will be shared between multiple
cgroups, global and node counters will reflect the total number of slab
pages. However memcg and lruvec counters will be used for per-memcg slab
memory tracking, which will take separate kernel objects in the account.
Keeping global and node counters in pages helps to avoid additional
overhead.
The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it
will fit into atomic_long_t we use for vmstats.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
When I increased the upper bound of the min_free_kbytes value in
ee8eb9a5fe ("mm/page_alloc: increase default min_free_kbytes bound") I
forgot to tweak the above comment to reflect the new value. This patch
fixes that mistake.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Fabrizio D'Angelo <fdangelo@redhat.com>
Link: http://lkml.kernel.org/r/20200624221236.29560-1-jsavitz@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
virtio-mem
doorbell mapping for vdpa
config interrupt support in ifc
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7fZ6APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkDoIAMcBcQx5su1iuX7vT35xzUWZO478eAf1jOMZ
7KxKUVBeztkcxVFUlRVRu9MR6wOzwHils+1HD6025775Smr5M6x3aJxR6xOORaBj
RoU6OVGkpDvbzsxlhW+xhONz4O7/RkveKJPCwzGjqHrsFeh92lkfTqroz/EuNpw+
LZsO0+DhdUf123HbwHQp5lxW8EjyrRabgeZZg/D9VLPhoCP88vCjRhBXU2GPuaUl
/UNXsQafn4xUgrxPaoN5f4Phn/P46NNrbZ1jmlkw/z/3QhF/DhktGXGaZsIHDCN/
vicUii0or5QLeBsZpMbKko/BIe2xWHxFjkMRhMOMZOfcBb6sMBI=
=auUa
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- virtio-mem: paravirtualized memory hotplug
- support doorbell mapping for vdpa
- config interrupt support in ifc
- fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
vhost/test: fix up after API change
virtio_mem: convert device block size into 64bit
virtio-mem: drop unnecessary initialization
ifcvf: implement config interrupt in IFCVF
vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
vhost_vdpa: Support config interrupt in vdpa
ifcvf: ignore continuous setting same status value
virtio-mem: Don't rely on implicit compiler padding for requests
virtio-mem: Try to unplug the complete online memory block first
virtio-mem: Use -ETXTBSY as error code if the device is busy
virtio-mem: Unplug subblocks right-to-left
virtio-mem: Drop manual check for already present memory
virtio-mem: Add parent resource for all added "System RAM"
virtio-mem: Better retry handling
virtio-mem: Offline and remove completely unplugged memory blocks
mm/memory_hotplug: Introduce offline_and_remove_memory()
virtio-mem: Allow to offline partially unplugged memory blocks
mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
virtio-mem: Paravirtualized memory hotunplug part 2
virtio-mem: Paravirtualized memory hotunplug part 1
...
We can now handle sysctl parameters on kernel command line, but
historically some parameters introduced their own command line
equivalent, which we don't want to remove for compatibility reasons.
We can, however, convert them to the generic infrastructure with a table
translating the legacy command line parameters to their sysctl names,
and removing the one-off param handlers.
This patch adds the support and makes the first conversion to
demonstrate it, on the (deprecated) numa_zonelist_order parameter.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Guilherme G . Piccoli" <gpiccoli@canonical.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200427180433.7029-3-vbabka@suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
virtio-mem wants to allow to offline memory blocks of which some parts
were unplugged (allocated via alloc_contig_range()), especially, to later
offline and remove completely unplugged memory blocks. The important part
is that PageOffline() has to remain set until the section is offline, so
these pages will never get accessed (e.g., when dumping). The pages should
not be handed back to the buddy (which would require clearing PageOffline()
and result in issues if offlining fails and the pages are suddenly in the
buddy).
Let's allow to do that by allowing to isolate any PageOffline() page
when offlining. This way, we can reach the memory hotplug notifier
MEM_GOING_OFFLINE, where the driver can signal that he is fine with
offlining this page by dropping its reference count. PageOffline() pages
with a reference count of 0 can then be skipped when offlining the
pages (like if they were free, however they are not in the buddy).
Anybody who uses PageOffline() pages and does not agree to offline them
(e.g., Hyper-V balloon, XEN balloon, VMWare balloon for 2MB pages) will not
decrement the reference count and make offlining fail when trying to
migrate such an unmovable page. So there should be no observable change.
Same applies to balloon compaction users (movable PageOffline() pages), the
pages will simply be migrated.
Note 1: If offlining fails, a driver has to increment the reference
count again in MEM_CANCEL_OFFLINE.
Note 2: A driver that makes use of this has to be aware that re-onlining
the memory block has to be handled by hooking into onlining code
(online_page_callback_t), resetting the page PageOffline() and
not giving them to the buddy.
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-7-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
commit 3c710c1ad1 ("mm, vmscan extract shrink_page_list reclaim counters
into a struct") changed data type for the function, so changing return
type for funciton and its caller.
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1588168259-25604-1-git-send-email-maninder1.s@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add missing line breaks on pr_warn().
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200603063547.235825-1-chentao107@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using padata during deferred init has only been tested on x86, so for now
limit it to this architecture.
If another arch wants this, it can find the max thread limit that's best
for it and override deferred_page_init_max_threads().
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-8-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Deferred page init used to report the number of pages initialized:
node 0 initialised, 32439114 pages in 97ms
Tracking this makes the code more complicated when using multiple threads.
Given that the statistic probably has limited value, especially since a
zone grows on demand so that the page count can vary, just remove it.
The boot message now looks like
node 0 deferred pages initialised in 97ms
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-6-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initializing struct pages is a long task and keeping interrupts disabled
for the duration of this operation introduces a number of problems.
1. jiffies are not updated for long period of time, and thus incorrect time
is reported. See proposed solution and discussion here:
lkml/20200311123848.118638-1-shile.zhang@linux.alibaba.com
2. It prevents farther improving deferred page initialization by allowing
intra-node multi-threading.
We are keeping interrupts disabled to solve a rather theoretical problem
that was never observed in real world (See 3a2d7fa8a3).
Let's keep interrupts enabled. In case we ever encounter a scenario where
an interrupt thread wants to allocate large amount of memory this early in
boot we can deal with that by growing zone (see deferred_grow_zone()) by
the needed amount before starting deferred_init_memmap() threads.
Before:
[ 1.232459] node 0 initialised, 12058412 pages in 1ms
After:
[ 1.632580] node 0 initialised, 12051227 pages in 436ms
Fixes: 3a2d7fa8a3 ("mm: disable interrupts while initializing deferred pages")
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Yiqian Wei <yiwei@redhat.com>
Cc: <stable@vger.kernel.org> [4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-3-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "initialize deferred pages with interrupts enabled", v4.
Keep interrupts enabled during deferred page initialization in order to
make code more modular and allow jiffies to update.
Original approach, and discussion can be found here:
http://lkml.kernel.org/r/20200311123848.118638-1-shile.zhang@linux.alibaba.com
This patch (of 3):
deferred_init_memmap() disables interrupts the entire time, so it calls
touch_nmi_watchdog() periodically to avoid soft lockup splats. Soon it
will run with interrupts enabled, at which point cond_resched() should be
used instead.
deferred_grow_zone() makes the same watchdog calls through code shared
with deferred init but will continue to run with interrupts disabled, so
it can't call cond_resched().
Pull the watchdog calls up to these two places to allow the first to be
changed later, independently of the second. The frequency reduces from
twice per pageblock (init and free) to once per max order block.
Fixes: 3a2d7fa8a3 ("mm: disable interrupts while initializing deferred pages")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Yiqian Wei <yiwei@redhat.com>
Cc: <stable@vger.kernel.org> [4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-2-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Restrict elements in compound_page_dtors[] array per NR_COMPOUND_DTORS and
explicitly position them according to enum compound_dtor_id. This
improves protection against possible misalignment between
compound_page_dtors[] and enum compound_dtor_id later on.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/1589795958-19317-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Updating the zone watermarks by any means, like min_free_kbytes,
water_mark_scale_factor etc, when ->watermark_boost is set will result in
higher low and high watermarks than the user asked.
Below are the steps to reproduce the problem on system setup of Android
kernel running on Snapdragon hardware.
1) Default settings of the system are as below:
#cat /proc/sys/vm/min_free_kbytes = 5162
#cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node
Node 0, zone Normal
min 797
low 8340
high 8539
2) Monitor the zone->watermark_boost(by adding a debug print in the
kernel) and whenever it is greater than zero value, write the same
value of min_free_kbytes obtained from step 1.
#echo 5162 > /proc/sys/vm/min_free_kbytes
3) Then read the zone watermarks in the system while the
->watermark_boost is zero. This should show the same values of
watermarks as step 1 but shown a higher values than asked.
#cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node
Node 0, zone Normal
min 797
low 21148
high 21347
These higher values are because of updating the zone watermarks using the
macro min_wmark_pages(zone) which also adds the zone->watermark_boost.
#define min_wmark_pages(z) (z->_watermark[WMARK_MIN] +
z->watermark_boost)
So the steps that lead to the issue are:
1) On the extfrag event, watermarks are boosted by storing the required
value in ->watermark_boost.
2) User tries to update the zone watermarks level in the system through
min_free_kbytes or watermark_scale_factor.
3) Later, when kswapd woke up, it resets the zone->watermark_boost to
zero.
In step 2), we use the min_wmark_pages() macro to store the watermarks
in the zone structure thus the values are always offsetted by
->watermark_boost value. This can be avoided by resetting the
->watermark_boost to zero before it is used.
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Link: http://lkml.kernel.org/r/1589457511-4255-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initially, the per-cpu pagesets of each zone are set to the boot pagesets.
The real pagesets are allocated later but before that happens, page
allocations do occur and the numa stats for the boot pagesets get
incremented since they are common to all zones at that point.
The real pagesets, however, are allocated for the populated zones only.
Unpopulated zones, like those associated with memory-less nodes, continue
using the boot pageset and end up skewing the numa stats of the
corresponding node.
E.g.
$ numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 4 5 6 7
node 1 size: 8131 MB
node 1 free: 6980 MB
node distances:
node 0 1
0: 10 40
1: 40 10
$ numastat
node0 node1
numa_hit 108 56495
numa_miss 0 0
numa_foreign 0 0
interleave_hit 0 4537
local_node 108 31547
other_node 0 24948
Hence, the boot pageset stats need to be cleared after the real pagesets
are allocated.
After this point, the stats of the boot pagesets do not change as page
allocations requested for a memory-less node will either fail (if
__GFP_THISNODE is used) or get fulfilled by a preferred zone of a
different node based on the fallback zonelist.
[sandipan@linux.ibm.com: v3]
Link: http://lkml.kernel.org/r/20200511170356.162531-1-sandipan@linux.ibm.com
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Link: http://lkml.kernel.org/r/9c9c2d1b15e37f6e6bf32f99e3100035e90c4ac9.1588868430.git.sandipan@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pageblock migrate type is encoded in GFP flags, just as zone_type and
zonelist.
Currently we use gfp_zone() and gfp_zonelist() to extract related
information, it would be proper to use the same naming convention for
migrate type.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200329080823.7735-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slightly simplify the code by initializing user_mask with NODE_MASK_NONE,
instead of later calling nodes_clear(). This saves a line of code.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200330220840.21228-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
classzone_idx is just different name for high_zoneidx now. So, integrate
them and add some comment to struct alloc_context in order to reduce
future confusion about the meaning of this variable.
The accessor, ac_classzone_idx() is also removed since it isn't needed
after integration.
In addition to integration, this patch also renames high_zoneidx to
highest_zoneidx since it represents more precise meaning.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/1587095923-7515-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When requesting memory allocation from a specific zone is not satisfied,
it will fall to lower zone to try allocating memory. In this case, lower
zone's ->lowmem_reserve[] will help protect its own memory resource. The
higher the relevant ->lowmem_reserve[] is, the harder the upper zone can
get memory from this lower zone.
However, this protection mechanism should be applied to populated zone,
but not an empty zone. So filling ->lowmem_reserve[] for empty zone is
not necessary, and may mislead people that it's valid data in that zone.
Node 2, zone DMA
pages free 0
min 0
low 0
high 0
spanned 0
present 0
managed 0
protection: (0, 0, 1024, 1024)
Node 2, zone DMA32
pages free 0
min 0
low 0
high 0
spanned 0
present 0
managed 0
protection: (0, 0, 1024, 1024)
Node 2, zone Normal
per-node stats
nr_inactive_anon 0
nr_active_anon 143
nr_inactive_file 0
nr_active_file 0
nr_unevictable 0
nr_slab_reclaimable 45
nr_slab_unreclaimable 254
Here clear out zone->lowmem_reserve[] if zone is empty.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200402140113.3696-3-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "improvements about lowmem_reserve and /proc/zoneinfo", v2.
This patch (of 3):
When people write to /proc/sys/vm/lowmem_reserve_ratio to change
sysctl_lowmem_reserve_ratio[], setup_per_zone_lowmem_reserve() is called
to recalculate all ->lowmem_reserve[] for each zone of all nodes as below:
static void setup_per_zone_lowmem_reserve(void)
{
...
for_each_online_pgdat(pgdat) {
for (j = 0; j < MAX_NR_ZONES; j++) {
...
while (idx) {
...
if (sysctl_lowmem_reserve_ratio[idx] < 1) {
sysctl_lowmem_reserve_ratio[idx] = 0;
lower_zone->lowmem_reserve[j] = 0;
} else {
...
}
}
}
}
Meanwhile, here, sysctl_lowmem_reserve_ratio[idx] will be tuned if its
value is smaller than '1'. As we know, sysctl_lowmem_reserve_ratio[] is
set for zone without regarding to which node it belongs to. That means
the tuning will be done on all nodes, even though it has been done in the
first node.
And the tuning will be done too even when init_per_zone_wmark_min() calls
setup_per_zone_lowmem_reserve(), where actually nobody tries to change
sysctl_lowmem_reserve_ratio[].
So now move the tuning into lowmem_reserve_ratio_sysctl_handler(), to make
code logic more reasonable.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20200402140113.3696-1-bhe@redhat.com
Link: http://lkml.kernel.org/r/20200402140113.3696-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 397dc00e24 ("mips: sgi-ip27: switch from DISCONTIGMEM
to SPARSEMEM"), the last caller of free_bootmem_with_active_regions() was
gone. Now no user calls it any more.
Let's remove it.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200402143455.5145-1-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently a cma area is barely used by the page allocator because it's
used only as a fallback from movable, however kswapd tries hard to make
sure that the fallback path isn't used.
This results in a system evicting memory and pushing data into swap, while
lots of CMA memory is still available. This happens despite the fact that
alloc_contig_range is perfectly capable of moving any movable allocations
out of the way of an allocation.
To effectively use the cma area let's alter the rules: if the zone has
more free cma pages than the half of total free pages in the zone, use cma
pageblocks first and fallback to movable blocks in the case of failure.
[guro@fb.com: ifdef the cma-specific code]
Link: http://lkml.kernel.org/r/20200311225832.GA178154@carbon.DHCP.thefacebook.com
Co-developed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200306150102.3e77354b@imladris.surriel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We share similar code in check_[new|free]_page_bad() to get the page's bad
reason.
Let's extract it and reduce code duplication.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-6-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_pages_check() is the counterpart of check_new_page(). Rename it to
use the same naming convention.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-5-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_pages_check_bad() is the counterpart of check_new_page_bad(). Rename
it to use the same naming convention.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-4-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 5b57b8f227 ("mm/debug.c: always print flags in
dump_page()"), page->flags is always printed for a bad page. It is not
necessary to have bad_flags any more.
Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-3-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
