In order to reduce excessive memory mapping cost in live migration and
VM reboot, it is desirable to decouple the vhost-vdpa IOTLB abstraction
from the virtio device life cycle, i.e. mappings can be kept intact
across virtio device reset. Leverage the .reset_map callback, which is
meant to destroy the iotlb on the given ASID and recreate the 1:1
passthrough/identity mapping. To be consistent, the mapping on device
creation is initiailized to passthrough/identity with PA 1:1 mapped as
IOVA. With this the device .reset op doesn't have to maintain and clean
up memory mappings by itself.
Additionally, implement .compat_reset to cater for older userspace,
which may wish to see mapping to be cleared during reset.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <1697880319-4937-8-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
If the shared_buffer allocation fails, need to unregister mgmt_dev first.
Cc: stable@vger.kernel.org
Fixes: abebb16254 ("vdpa_sim_blk: support shared backend")
Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230821060333.1155-1-shawn.shao@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Start offering the feature in the simulator. Other parent drivers can
follow this code to offer it too.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-5-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa_sim_blk simulator uses a ramdisk as the backend. To test live
migration, we need two devices that share the backend to have the data
synchronized with each other.
Add a new module parameter to make the buffer shared between all devices.
The shared_buffer_mutex is used just to ensure that each operation is
atomic, but it is up to the user to use the devices knowing that the
underlying ramdisk is shared.
For example, when we do a migration, the VMM (e.g., QEMU) will guarantee
to write to the destination device, only after completing operations with
the source device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230407133658.66339-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the vdpa_sim core does not use the buffer, but only
allocates it.
The buffer is used by devices differently, and some future devices
may not use it. So let's move all its management inside the devices.
Add a new `free` device callback called to clean up the resources
allocated by the device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230407133658.66339-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The new "use_va" module parameter (default: true) is used in
vdpa_alloc_device() to inform the vDPA framework that the device
supports VA.
vringh is initialized to use VA only when "use_va" is true and the
user's mm has been bound. So, only when the bus supports user VA
(e.g. vhost-vdpa).
vdpasim_mm_work_fn work is used to serialize the binding to a new
address space when the .bind_mm callback is invoked, and unbinding
when the .unbind_mm callback is invoked.
Call mmget_not_zero()/kthread_use_mm() inside the worker function
to pin the address space only as long as needed, following the
documentation of mmget() in include/linux/sched/mm.h:
* Never use this function to pin this address space for an
* unbounded/indefinite amount of time.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131734.45943-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spinlock we use to protect the state of the simulator is sometimes
held for a long time (for example, when devices handle requests).
This also prevents us from calling functions that might sleep (such as
kthread_flush_work() in the next patch), and thus having to release
and retake the lock.
For these reasons, let's replace the spinlock with a mutex that gives
us more flexibility.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131730.45920-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's use our own kthread to run device jobs.
This allows us more flexibility, especially we can attach the kthread
to the user address space when vDPA uses user's VA.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131725.45908-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's move work management inside the vdpa_sim core.
This way we can easily change how we manage the works, without
having to change the devices each time.
Acked-by: Eugenio Pérez Martin <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131721.45886-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Initialization must be completed before calling _vdpa_register_device()
since it can connect the device to the vDPA bus, so requests can arrive
after that call.
So for example vdpasim_net_work(), which uses the net->*_stats variables,
can be scheduled before they are initialized.
Let's move _vdpa_register_device() to the end of vdpasim_net_dev_add()
and add a comment to avoid future issues.
Fixes: 0899774cb3 ("vdpa_sim_net: vendor satistics")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230329160321.187176-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Starting from an used_idx different than 0 is needed in use cases like
virtual machine migration. Not doing so and letting the caller set an
avail idx different than 0 causes destination device to try to use old
buffers that source driver already recover and are not available
anymore.
Since vdpa_sim does not support receive inflight descriptors as a
destination of a migration, let's set both avail_idx and used_idx the
same at vq start. This is how vhost-user works in a
VHOST_SET_VRING_BASE call.
Although the simple fix is to set last_used_idx at vdpasim_set_vq_state,
it would be reset at vdpasim_queue_ready. The last_avail_idx case is
fixed with commit 0e84f918fa ("vdpa_sim: not reset state in
vdpasim_queue_ready"). Since the only option is to make it equal to
last_avail_idx, adding the only change needed here.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230302181857.925374-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two spelling mistakes in some literal strings. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20230130092644.37002-1-colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We used to (ab)use the DMA ops for setting up identical mappings in
the IOTLB. This patch tries to get rid of the those unnecessary DMA
ops by maintaining a simple identical/passthrough mappings by
default. When bound to virtio_vdpa driver, DMA API will simply use PA
as the IOVA and we will be all fine. When the vDPA bus tries to setup
customized mapping (e.g when bound to vhost-vDPA), the
identical/passthrough mapping will be removed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221223060021.28011-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
This patch adds support for basic vendor stats that include counters
for tx, rx and cvq.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221223055548.27810-5-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch adds a new config ops callback to allow individual
simulator to implement the vendor stats callback.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221223055548.27810-4-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Allow individual simulator to customize the allocation size.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221223055548.27810-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows us to control the allocation size of the structure.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221223055548.27810-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vDPA simulators are software emulated device, so let's switch to use
weak barriers to avoid extra overhead in the driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221221062146.15356-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Implement resume operation for vdpa_sim devices, so vhost-vdpa will
offer that backend feature and userspace can effectively resume the
device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Message-Id: <15a4566826033c5dd9a2167e5cfb0ef4d90cea49.1672742878.git.sebastien.boeuf@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
VIRTIO_NET_S_LINK_UP is already returned in config reads since vdpasim
creation, but the feature bit was not offered to the driver.
Tested modifying VIRTIO_NET_S_LINK_UP and different values of "status"
in qemu virtio-net options, using vhost_vdpa.
Not considering as a fix, because there should be no driver trusting in
this config read before the feature flag.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221117155502.1394700-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
vdpasim_queue_ready calls vringh_init_iotlb, which resets split indexes.
But it can be called after setting a ring base with
vdpasim_set_vq_state.
Fix it by stashing them. They're still resetted in vdpasim_vq_reset.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230118164359.1523760-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
In the receive_filter(), should not drop the packet with the
broadcast/multicast address. Add the check for this
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221214054306.24145-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
After commit bda324fd03 ("vdpasim: control virtqueue support"),
vdpasim->iommu became an array of IOTLB, so we should clean the
mappings of each free one by one instead of just deleting the ranges
in the first IOTLB which may leak maps.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221213090717.61529-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
When we initialize vringh, we should pass the features and the
number of elements in the virtqueue negotiated with the driver,
otherwise operations with vringh may fail.
This was discovered in a case where the driver sets a number of
elements in the virtqueue different from the value returned by
.get_vq_num_max().
In vdpasim_vq_reset() is safe to initialize the vringh with
default values, since the virtqueue will not be used until
vdpasim_queue_ready() is called again.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221110141335.62171-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
This patch implements features provisioning for vdpa_sim_net.
1) validating the provisioned features to be a subset of the parent
features.
2) clearing the features that is not wanted by the userspace
For example:
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
1) provision vDPA device with all features that are supported by the
net simulator
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
2) provision vDPA device with a subset of the features
dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Expose VIRTIO_BLK_F_DISCARD and VIRTIO_BLK_F_WRITE_ZEROES features
to the drivers and handle VIRTIO_BLK_T_DISCARD and
VIRTIO_BLK_T_WRITE_ZEROES requests checking ranges and flags.
The simulator behaves like a ramdisk, so for VIRTIO_BLK_F_DISCARD
does nothing, while for VIRTIO_BLK_T_WRITE_ZEROES sets to 0 the
specified region.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-5-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The simulator behaves like a ramdisk, so we don't have to do
anything when a VIRTIO_BLK_T_FLUSH request is received, but it
could be useful to test driver behavior.
Let's expose the VIRTIO_BLK_F_FLUSH feature to inform the driver
that we support the flush command.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add handling of other requests, where will be
useful to reuse vdpasim_blk_check_range().
So let's make it more generic by adding the `max_sectors` parameter,
since different requests allow different numbers of maximum sectors.
Let's also print the messages directly in vdpasim_blk_check_range()
to avoid duplicate prints.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO spec states: "The sector number indicates the offset
(multiplied by 512) where the read or write is to occur. This field is
unused and set to 0 for commands other than read or write."
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220811083632.77525-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement suspend operation for vdpa_sim devices, so vhost-vdpa will
offer that backend feature and userspace can effectively suspend the
device.
This is a must before get virtqueue indexes (base) for live migration,
since the device could modify them after userland gets them. There are
individual ways to perform that action for some devices
(VHOST_NET_SET_BACKEND, VHOST_VSOCK_SET_RUNNING, ...) but there was no
way to perform it for any vhost device (and, in particular, vhost-vdpa).
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220810171512.2343333-5-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit bda324fd03 ("vdpasim: control virtqueue support") changed
the allocation of iotlbs calling vhost_iotlb_init() for each address
space, instead of vhost_iotlb_alloc().
With this change we forgot to use the limit we had introduced with
the `max_iotlb_entries` module parameter.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220621151208.189959-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Commit bda324fd03 ("vdpasim: control virtqueue support") added two
new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to
initialize them for vdpa_sim_blk.
When creating a new vdpa_sim_blk device this causes the kernel
to panic in this way:
$ vdpa dev add mgmtdev vdpasim_blk name blk0
BUG: kernel NULL pointer dereference, address: 0000000000000030
...
RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb]
...
Call Trace:
<TASK>
vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb]
vdpasim_map_range+0x91/0xd0 [vdpa_sim]
vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim]
...
This happens because vdpasim->iommu[0] is not initialized when
dev_attr.nas is 0.
Let's fix this issue by initializing both (nas, ngroups) to 1 for
vdpa_sim_blk.
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220621151323.190431-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Call vringh_complete_iotlb() even when we encounter a serious error
that prevents us from writing the status in the "in" header
(e.g. the header length is incorrect, etc.).
The guest is misbehaving, so maybe the ring is in a bad state, but
let's avoid making things worse.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Limit the number of requests (4 per queue as for vdpa_sim_net) handled
in a batch to prevent the worker from using the CPU for too long.
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Use dev_dbg() instead of dev_err()/dev_warn() to avoid flooding the
host with prints, when the guest driver is misbehaving.
In this way, prints can be dynamically enabled when the vDPA block
simulator is used to validate a driver.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20220630153221.83371-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The > comparison needs to be >= to prevent an out of bounds access
of the vdpasim->iommu[] array. The vdpasim->iommu[] is allocated in
vdpasim_create() and it has vdpasim->dev_attr.nas elements.
Fixes: 87e5afeac247 ("vdpasim: control virtqueue support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <YotGQU1q224RKZR8@kili>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Code must be resilient to enable a queue many times.
At the moment the queue is resetting so it's definitely not the expected
behavior.
v2: set vq->ready = 0 at disable.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Cc: stable@vger.kernel.org
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220519145919.772896-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch introduces the control virtqueue support for vDPA
simulator. This is a requirement for supporting advanced features like
multiqueue.
A requirement for control virtqueue is to isolate its memory access
from the rx/tx virtqueues. This is because when using vDPA device
for VM, the control virqueue is not directly assigned to VM. Userspace
(Qemu) will present a shadow control virtqueue to control for
recording the device states.
The isolation is done via the virtqueue groups and ASID support in
vDPA through vhost-vdpa. The simulator is extended to have:
1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue)
2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1
contains CVQ
3) two address spaces and the simulator simply implements the address
spaces by mapping it 1:1 to IOTLB.
For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1
to group 1. So we have:
1) The IOTLB for virtqueue group 0 contains the mappings of guest, so
RX and TX can be assigned to guest directly.
2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which
is the buffers that allocated and managed by VMM only. So CVQ of
vhost-vdpa is visible to VMM only. And Guest can not access the CVQ
of vhost-vdpa.
For the other use cases, since AS 0 is associated to all virtqueue
groups by default. All virtqueues share the same mapping by default.
To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is
implemented in the simulator for the driver to set mac address.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-20-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements a simple unicast filter for vDPA simulator.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-19-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wrap up common buffer completion logic in to vdpasim_net_complete
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-18-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We've already reported maximum mtu via config space, so let's
advertise the feature.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-17-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Configure max supported virtqueues features on the management device.
This info can be retrieved using:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 2
dev_features MAC ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-15-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Configure max supported virtqueues on the management device.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-13-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together.
Cc: stable@vger.kernel.org
Fixes: 4080fc1067 ("vdpa_sim: use iova module to allocate IOVA addresses")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable user to set the mac address and mtu so that each vdpa device
can have its own user specified mac address and mtu.
Now that user is enabled to set the mac address, remove the module
parameter for same.
And example of setting mac addr and mtu and view the configuration:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
