mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 00:51:44 +00:00
5f5ce6bcfc
41030 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
Dave Hansen
|
74e19ef0ff |
uaccess: Add speculation barrier to copy_from_user()
The results of "access_ok()" can be mis-speculated. The result is that you can end speculatively: if (access_ok(from, size)) // Right here even for bad from/size combinations. On first glance, it would be ideal to just add a speculation barrier to "access_ok()" so that its results can never be mis-speculated. But there are lots of system calls just doing access_ok() via "copy_to_user()" and friends (example: fstat() and friends). Those are generally not problematic because they do not _consume_ data from userspace other than the pointer. They are also very quick and common system calls that should not be needlessly slowed down. "copy_from_user()" on the other hand uses a user-controller pointer and is frequently followed up with code that might affect caches. Take something like this: if (!copy_from_user(&kernelvar, uptr, size)) do_something_with(kernelvar); If userspace passes in an evil 'uptr' that *actually* points to a kernel addresses, and then do_something_with() has cache (or other) side-effects, it could allow userspace to infer kernel data values. Add a barrier to the common copy_from_user() code to prevent mis-speculated values which happen after the copy. Also add a stub for architectures that do not define barrier_nospec(). This makes the macro usable in generic code. Since the barrier is now usable in generic code, the x86 #ifdef in the BPF code can also go away. Reported-by: Jordy Zomer <jordyzomer@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
2504ba8b01 |
Power management updates for 6.3-rc1
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
|
||
|
Linus Torvalds
|
902d9fcd8d |
seccomp update for v6.3-rc1
- Fix kernel-doc function name ordering to avoid warning (Randy Dunlap) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmPv0ngWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhVmEACxy2frT9DJUKLyTtYLlttXkaEV KttcsIPzkOoaf1cQHVodPfdERgKIw8zrm/L8++e77wznTlm59aQq8f1wYMUufPBZ yQCZq/FpmEBbcVf4HWmoFUdWa2nppH7fGWs58bmAfGniNCzltdpXsqNlxxBqzA6R x62WlphysPDJlbFJ7d5J4x1MZCw+e5I5lw1TI81ybtCgTx4gFy2QL6lIncbCR7Oq lPmF8yDuFxWRcHr2GtLrUjdtI4qSk/TSJcn2DNJ7anIsikxDKeRI8Iwq28UgvC4E fQK0zhVgWaBT1lgDAyu+Vrz3I9nt+XW5Te9xxCEv+0PHOkakF8kz1ouTVqBiYAVs vk/1M1jSpSGwpXmW8NbuirDVBf9Iqm2jXO6fxRkS8vzYuOVtJox9tuVMMru4oSlK K2HlZgBmr+sU/RXtrlTRxlLPvW5Lvy7jQG3hmsnPN3Nkf+ADuYY00IFMkA5xwVBg jhSPYMwhtii46fg2lgrqqTScXIxq1Zzu0gguDKe1B2RCq/0oAvoxN/zWmBWwdq65 hqLEPe+aSEeUsQcIuZ5k+rixT6cK8qTCYCkv1LGxMrnZyeJ9WKzprOcilRYaW5C4 vw8LqyNB12/YTEFe58E2MspccUA+zPc9ei2HV3Ammtd2pRx+CCpyaN5EdQqbWJbL RGjrCLpEN+Y8O+AA9Q== =NUg2 -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp update from Kees Cook: - Fix kernel-doc function name ordering to avoid warning (Randy Dunlap) * tag 'seccomp-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: fix kernel-doc function name warning |
||
|
Linus Torvalds
|
8cc01d43f8 |
RCU pull request for v6.3
This pull request contains the following branches:
doc.2023.01.05a: Documentation updates.
fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably:
o Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number
of callbacks.
o Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized.
o Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have doen this for mnay years.)
o Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled,
so this should not (yet) affect production use cases.)
kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of
polled grace periods, thus reducing memory footprint by almost
two orders of magnitude, admittedly on a microbenchmark.
This series also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs
where kfree_rcu(p), which can block, was typed instead of the
intended kfree_rcu(p, rh).
srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that
causes SRCU to fail when booted on a system with a non-zero boot
CPU. This surprising situation actually happens for kdump kernels
on the powerpc architecture. It also adds an srcu_down_read()
and srcu_up_read(), which act like srcu_read_lock() and
srcu_read_unlock(), but allow an SRCU read-side critical section
to be handed off from one task to another.
srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option.
There are a few more commits that are not yet acked or pulled
into maintainer trees, and these will be in a pull request for
a later merge window.
tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes:
o A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang.
o A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can result
in a too-short grace period.
o A race between shrinking RCU tasks down to a single callback list
and queuing a new callback to some other CPU, but where that
queuing is delayed for more than an RCU grace period. This can
result in that callback being stranded on the non-boot CPU.
torture.2023.01.05a: Torture-test updates and fixes.
torturescript.2023.01.03a: Torture-test scripting updates and fixes.
stall.2023.01.09a: Provide additional RCU CPU stall-warning information
in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and
restore the full five-minute timeout limit for expedited RCU
CPU stall warnings.
-----BEGIN PGP SIGNATURE-----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=bBYK
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably:
- Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number of
callbacks
- Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized
- Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have done this for many years)
- Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled, so
this should not (yet) affect production use cases)
- Make kfree_rcu() and friends take advantage of polled grace periods,
thus reducing memory footprint by almost two orders of magnitude,
admittedly on a microbenchmark
This also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs where
kfree_rcu(p), which can block, was typed instead of the intended
kfree_rcu(p, rh)
- SRCU updates, perhaps most notably fixing a bug that causes SRCU to
fail when booted on a system with a non-zero boot CPU. This
surprising situation actually happens for kdump kernels on the
powerpc architecture
This also adds an srcu_down_read() and srcu_up_read(), which act like
srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
critical section to be handed off from one task to another
- Clean up the now-useless SRCU Kconfig option
There are a few more commits that are not yet acked or pulled into
maintainer trees, and these will be in a pull request for a later
merge window
- RCU-tasks updates, perhaps most notably these fixes:
- A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang
- A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can
result in a too-short grace period
- A race between shrinking RCU tasks down to a single callback
list and queuing a new callback to some other CPU, but where
that queuing is delayed for more than an RCU grace period. This
can result in that callback being stranded on the non-boot CPU
- Torture-test updates and fixes
- Torture-test scripting updates and fixes
- Provide additional RCU CPU stall-warning information in kernels built
with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
timeout limit for expedited RCU CPU stall warnings
* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
kernel/notifier: Remove CONFIG_SRCU
init: Remove "select SRCU"
fs/quota: Remove "select SRCU"
fs/notify: Remove "select SRCU"
fs/btrfs: Remove "select SRCU"
fs: Remove CONFIG_SRCU
drivers/pci/controller: Remove "select SRCU"
drivers/net: Remove "select SRCU"
drivers/md: Remove "select SRCU"
drivers/hwtracing/stm: Remove "select SRCU"
drivers/dax: Remove "select SRCU"
drivers/base: Remove CONFIG_SRCU
rcu: Disable laziness if lazy-tracking says so
rcu: Track laziness during boot and suspend
rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
rcu: Align the output of RCU CPU stall warning messages
rcu: Add RCU stall diagnosis information
sched: Add helper nr_context_switches_cpu()
...
|
||
|
Linus Torvalds
|
8ca8d89b43 |
cgroup changes for v6.3-rc1
All the commits are trivial. Doc updates and a trivial code cleanup. -----BEGIN PGP SIGNATURE----- iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY/Kvjw4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGfcZAQDoyqEm807R2iaELEfee0xq/NPwJIaDRnXDP6ZL rIEtqAD8CzpvvtKauekMIsCHVq7SuxDae8Hi0a/RImN8e1sy6wY= =pUSo -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "All the changes are trivial: documentation updates and a trivial code cleanup" * tag 'cgroup-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: fix a few kernel-doc warnings & coding style docs: cgroup-v1: use numbered lists for user interface setup docs: cgroup-v1: add internal cross-references docs: cgroup-v1: make swap extension subsections subsections docs: cgroup-v1: use bullet lists for list of stat file tables docs: cgroup-v1: move hierarchy of accounting caption docs: cgroup-v1: fix footnotes docs: cgroup-v1: use code block for locking order schema docs: cgroup-v1: wrap remaining admonitions in admonition blocks docs: cgroup-v1: replace custom note constructs with appropriate admonition blocks cgroup/cpuset: no need to explicitly init a global static variable |
||
|
Linus Torvalds
|
3e82b41e1e |
workqueue changes for v6.3-rc1
* When per-cpu workqueue workers expire after sitting idle for too long, they used to wake up to the CPU that they're bound to to exit. This unfortunately could cause unwanted disturbances on CPUs isolated for e.g. RT applications. The worker exit path is restructured so that an existing worker is unbound from its CPU before being woken up for the last time, allowing it to migrate away from an isolated CPU for exiting. * A couple debug improvements. Watchdog dump is made more compact and workqueue now warns if used-after-free during the RCU grace period after destroy_workqueue(). -----BEGIN PGP SIGNATURE----- iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY/Ktfg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGUAyAQDAs8HXnn7HDHvmJKWga7OaG3x+LhgJ6k17B4TQ kUhX3QEAoVFB9YVX777rIBI+XgVVbjmgFP0SaRBCm8El8gUkUws= =WPMP -----END PGP SIGNATURE----- Merge tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - When per-cpu workqueue workers expire after sitting idle for too long, they used to wake up to the CPU that they're bound to in order to exit. This unfortunately could cause unwanted disturbances on CPUs isolated for e.g. RT applications. The worker exit path is restructured so that an existing worker is unbound from its CPU before being woken up for the last time, allowing it to migrate away from an isolated CPU for exiting. - A couple debug improvements. Watchdog dump is made more compact and workqueue now warns if used-after-free during the RCU grace period after destroy_workqueue(). * tag 'wq-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fold rebind_worker() within rebind_workers() workqueue: Unbind kworkers before sending them to exit() workqueue: Don't hold any lock while rcuwait'ing for !POOL_MANAGER_ACTIVE workqueue: Convert the idle_timer to a timer + work_struct workqueue: Factorize unbind/rebind_workers() logic workqueue: Protects wq_unbound_cpumask with wq_pool_attach_mutex workqueue: Make show_pwq() use run-length encoding workqueue: Add a new flag to spot the potential UAF error |
||
|
Linus Torvalds
|
9e58df973d |
Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code.
This also contains a first usecase in the block multi-queue code which
Jens asked to take along with the librarization.
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing.
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context.
- Move the IPI multiplexing code from the Apple AIC driver into the
core. so it can be reused by RISCV.
Drivers:
- Plug OF node refcounting leaks in various drivers.
- Correctly mark level triggered interrupts in the Broadcom L2 drivers.
- The usual small fixes and improvements.
- No new drivers for the record!
-----BEGIN PGP SIGNATURE-----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=+pu3
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
|
||
|
Linus Torvalds
|
560b803067 |
Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be directed
to the no restart function instead of doing a partial setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a user
space bug, preventing this is a correctness issue and caters to the
least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and RISC-V
variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=I67j
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and clockevent/source drivers:
Core:
- Yet another round of improvements to make the clocksource watchdog
more robust:
- Relax the clocksource-watchdog skew criteria to match the NTP
criteria.
- Temporarily skip the watchdog when high memory latencies are
detected which can lead to false-positives.
- Provide an option to enable TSC skew detection even on systems
where TSC is marked as reliable.
Sigh!
- Initialize the restart block in the nanosleep syscalls to be
directed to the no restart function instead of doing a partial
setup on entry.
This prevents an erroneous restart_syscall() invocation from
corrupting user space data. While such a situation is clearly a
user space bug, preventing this is a correctness issue and caters
to the least suprise principle.
- Ignore the hrtimer slack for realtime tasks in schedule_hrtimeout()
to align it with the nanosleep semantics.
Drivers:
- The obligatory new driver bindings for Mediatek, Rockchip and
RISC-V variants.
- Add support for the C3STOP misfeature to the RISC-V timer to handle
the case where the timer stops in deeper idle state.
- Set up a static key in the RISC-V timer correctly before first use.
- The usual small improvements and fixes all over the place"
* tag 'timers-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/timer-sun4i: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/em_sti: Mark driver as non-removable
clocksource/drivers/sh_tmu: Mark driver as non-removable
clocksource/drivers/riscv: Patch riscv_clock_next_event() jump before first use
clocksource/drivers/timer-microchip-pit64b: Add delay timer
clocksource/drivers/timer-microchip-pit64b: Select driver only on ARM
dt-bindings: timer: sifive,clint: add comaptibles for T-Head's C9xx
dt-bindings: timer: mediatek,mtk-timer: add MT8365
clocksource/drivers/riscv: Get rid of clocksource_arch_init() callback
clocksource/drivers/sh_cmt: Mark driver as non-removable
clocksource/drivers/timer-microchip-pit64b: Drop obsolete dependency on COMPILE_TEST
clocksource/drivers/riscv: Increase the clock source rating
clocksource/drivers/timer-riscv: Set CLOCK_EVT_FEAT_C3STOP based on DT
dt-bindings: timer: Add bindings for the RISC-V timer device
RISC-V: time: initialize hrtimer based broadcast clock event device
dt-bindings: timer: rk-timer: Add rktimer for rv1126
time/debug: Fix memory leak with using debugfs_lookup()
clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
posix-timers: Use atomic64_try_cmpxchg() in __update_gt_cputime()
clocksource: Verify HPET and PMTMR when TSC unverified
...
|
||
|
Linus Torvalds
|
1f2d9ffc7a |
Scheduler updates in this cycle are:
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
||
|
Linus Torvalds
|
a2f0e7eee1 |
The latest perf updates in this cycle are:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ztUT
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
- Optimize perf_sample_data layout
- Prepare sample data handling for BPF integration
- Update the x86 PMU driver for Intel Meteor Lake
- Restructure the x86 uncore code to fix a SPR (Sapphire Rapids)
discovery breakage
- Fix the x86 Zhaoxin PMU driver
- Cleanups
* tag 'perf-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
perf/x86/intel/uncore: Add Meteor Lake support
x86/perf/zhaoxin: Add stepping check for ZXC
perf/x86/intel/ds: Fix the conversion from TSC to perf time
perf/x86/uncore: Don't WARN_ON_ONCE() for a broken discovery table
perf/x86/uncore: Add a quirk for UPI on SPR
perf/x86/uncore: Ignore broken units in discovery table
perf/x86/uncore: Fix potential NULL pointer in uncore_get_alias_name
perf/x86/uncore: Factor out uncore_device_to_die()
perf/core: Call perf_prepare_sample() before running BPF
perf/core: Introduce perf_prepare_header()
perf/core: Do not pass header for sample ID init
perf/core: Set data->sample_flags in perf_prepare_sample()
perf/core: Add perf_sample_save_brstack() helper
perf/core: Add perf_sample_save_raw_data() helper
perf/core: Add perf_sample_save_callchain() helper
perf/core: Save the dynamic parts of sample data size
x86/kprobes: Use switch-case for 0xFF opcodes in prepare_emulation
perf/core: Change the layout of perf_sample_data
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
...
|
||
|
Linus Torvalds
|
6e649d0856 |
Updates for this cycle were:
- rwsem micro-optimizations
- spinlock micro-optimizations
- cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yTly
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem micro-optimizations
- spinlock micro-optimizations
- cleanups, simplifications
* tag 'locking-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vduse: Remove include of rwlock.h
locking/lockdep: Remove lockdep_init_map_crosslock.
x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock()
x86/PAT: Use try_cmpxchg() in set_page_memtype()
locking/rwsem: Disable preemption in all down_write*() and up_write() code paths
locking/rwsem: Disable preemption in all down_read*() and up_read() code paths
locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath
locking/qspinlock: Micro-optimize pending state waiting for unlock
|
||
|
Linus Torvalds
|
5b0ed59649 |
for-6.3/block-2023-02-16
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
||
|
Linus Torvalds
|
cd776a4342 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmPvZJwACgkQnJ2qBz9k QNlPcAf/UL7DDv37vnvfcFTa9lRyC0dXsgxnVZUwMU0hJs/ewbmueYGnJSBRTVLG 7ad7bKYQVWsjhas4YulofgRrFWxVDcR32qbC+pDo/X6vGjo4tDl2CNPYREY3n3kN xR6Ca7nPxBH5AVYwwOqBJSTqhWGy1TSDeuskndS0P+YtTv6Y4Zvm4UEiNAXJ4nwo 5Nd+bsPpkrEgQqO/NK2rCXfBfkJr4jAMcp+Nn2zAP44icZAXJYn8QrN3gVL6OZlN RKq36MGQf52lxyufVyFCulWKRbxhEKUS0nURZgAG+Sv87DlSuBJgRVG7xJ1baPpK 2g7wG2jaT7YMfA4PWms/rwAj/CkGLA== =NRh0 -----END PGP SIGNATURE----- Merge tag 'fsnotify_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "Support for auditing decisions regarding fanotify permission events" * tag 'fsnotify_for_v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify,audit: Allow audit to use the full permission event response fanotify: define struct members to hold response decision context fanotify: Ensure consistent variable type for response |
||
|
Linus Torvalds
|
05e6295f7b |
fs.idmapped.v6.3
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
=+BG5
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in
|
||
|
Linus Torvalds
|
0097c18e45 |
A fix for a long standing issue in the alarmtimer code:
Posix-timers armed with a short interval with an ignored signal result in an unpriviledged DoS. Due to the ignored signal the timer switches into self rearm mode. This issue had been "fixed" before but a rework of the alarmtimer code 5 years ago lost that workaround. There is no real good solution for this issue, which is also worked around in the core posix-timer code in the same way, but it certainly moved way up on the ever growing todo list. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmPxYIwTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYocQ5D/45vfKxvXsF0mCHPpF+Dgx96T3rzpXY aN/OeKWJ50A7IB5QKdxR3/VdDSuD6/HroFTfKTQIUVzkzAq47r7Ref7a0bgDsNbT SLTX8oBUA1ALKVew3wGo5qkY317xyGb2WPiSCzfjAZk07MplOzDRC4YYgEfnYAWW DzmzmkZQaAhKg3JONEB+kOas/E/T1MwTSs2NNJiY0hM6ATFK2+q2b706wjDHWspk QwjCfUCbrFKSxol+hSQgvQpzV18FmS328xU4Ht4pioflch0dv1/HDrml9OGrCCzs 8hEmCcjxFwM2FXTPIix8/Jn4S8ppZwYQCi10bBjjF+0N9s897s/4dom88EbfwjfB 4YpE62SI8VZIyK0JauSuRcCAfnN7BwfgL9UpS3MEgHq4K+fnydZOItBYI3Rg4JY/ hAKizX5VzBSAq/iUFC9+DFKjonOz3cCvY5xoPLPfCXukykbYfOCz1BiBqrTP7n1z /qWgDm+YvEyYNmoEqPjD5kktpHAvwGiMl6dmJJOUxaV6KNXWremykvI491oZK7fI P3eWMPhJwJV7ukjUF6Wc5ylwupsakf+x802MF03rgmajXtzxnnFATotb/21g9SSD /FYfdjS85CRArvYKuN59Yty8iMbjX4T1tRBaKgLYjpOdqgA6H6T3vmI+ShKS/FAM T92uQTZMpVm7+w== =s5VW -----END PGP SIGNATURE----- Merge tag 'timers-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A fix for a long standing issue in the alarmtimer code. Posix-timers armed with a short interval with an ignored signal result in an unpriviledged DoS. Due to the ignored signal the timer switches into self rearm mode. This issue had been "fixed" before but a rework of the alarmtimer code 5 years ago lost that workaround. There is no real good solution for this issue, which is also worked around in the core posix-timer code in the same way, but it certainly moved way up on the ever growing todo list" * tag 'timers-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Prevent starvation by small intervals and SIG_IGN |
||
Thomas Gleixner
|
6f3ee0e22b |
irqchip updates for 6.3
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
-----BEGIN PGP SIGNATURE-----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=ONcj
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
|
||
|
Linus Torvalds
|
64e0253df6 |
Misc scheduler fixes:
- Fix user-after-free bug in call_usermodehelper_exec() - Fix missing user_cpus_ptr update in __set_cpus_allowed_ptr_locked() - Fix PSI use-after-free bug in ep_remove_wait_queue() Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmPvL2ARHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jDTA/+IgUjTKxxvXk+vWblhJcJXnFJaN0v37gE I4zk0Z4cndpZhK4ayCKyb9sqMAnNHN/aWtJCfqwcctdp35B6A8PcXlFLEE1Fd54g ZO1P3b+sXg8yV+xrh6mJTu29oLCMMfYjmZiMw/1FM0tWCStOP7ECOdp0Afgsknpi gAoN/pgzDPcnVrLZMIRzX8Z4REPOGqnmR/ILNkKk0SD5dfwE0lw0aO0cDndpkD8j P24w4WRwDb6dL0AEHkNgFgufoYXB2p82cXVg94vGuonQ2siS+8ebo7YPMx+JB35o IGrto4MoCN/hQvSY7b0kkUccG7JA0eXzFBSdqpDAsXZbkGTtMlDfn6c8XWLz4WOs ZIoeJ9hvntLJgFNb7+KekYYdQZyLd/fGWoFlk93Sy+Ex7OQHeCotKrcXYStJN/2j FdpDoTzsnAkfQDWtwu6tguzoXfV9v91e4o6xxHG+PYrbARHwGanAAXE8EZ9XwVp+ 18oPp2GDUmlvZyJo/u/X9T5qu2usMgxqxIm15P31sYfzWjb9d/DvP7QjaEyuhdaV nB71Saa8RZQviZtnf++FfgzoCMPKWn2sYYO4IUU9f6OB3Zq1t+jiGraPuMP6bApA tjardQVE0L70C2YPy1p8FzWRpiBF6YwFXP3Q99+6WDcWBM5s8WkrwDYSRUc8ontj JNqfHCsiycY= =FVI9 -----END PGP SIGNATURE----- Merge tag 'sched-urgent-2023-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: - Fix user-after-free bug in call_usermodehelper_exec() - Fix missing user_cpus_ptr update in __set_cpus_allowed_ptr_locked() - Fix PSI use-after-free bug in ep_remove_wait_queue() * tag 'sched-urgent-2023-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/psi: Fix use-after-free in ep_remove_wait_queue() sched/core: Fix a missed update of user_cpus_ptr freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL |
||
|
Linus Torvalds
|
ca5ca22775 |
tracing: Make trace_define_field_ext() static
Just after the fix to TASK_COMM_LEN not converted to its value in trace_events was pulled, the kernel test robot reported that the helper function trace_define_field_ext() added to that change was only used in the file it was defined in but was not declared static. Make it a local function. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY+pQvhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qpWMAP958Izvo22zPjlvqypLrC4wkwOrU6BG ITApOESLGS6YMAEA3X1qVpjgXClFmRv6j+J7S6LdhUzhkOm9Sxg5Vejxzgo= =4fmj -----END PGP SIGNATURE----- Merge tag 'trace-v6.2-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixlet from Steven Rostedt: "Make trace_define_field_ext() static. Just after the fix to TASK_COMM_LEN not converted to its value in trace_events was pulled, the kernel test robot reported that the helper function trace_define_field_ext() added to that change was only used in the file it was defined in but was not declared static. Make it a local function" * tag 'trace-v6.2-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Make trace_define_field_ext() static |
||
Rafael J. Wysocki
|
ace5029856 |
Merge branches 'powercap', 'pm-domains', 'pm-em' and 'pm-opp'
Merge updates of the powercap framework, generic PM domains, Energy Model and operating performance points for 6.3-rc1: - Fix possible name leak in powercap_register_zone() (Yang Yingliang). - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui). - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada). - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui). - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman). - Add missing 'cache-unified' property in example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Remove "select SRCU" (Paul E. McKenney). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio). * powercap: powercap: intel_rapl: Fix handling for large time window powercap: idle_inject: Support 100% idle injection powercap: intel_rapl: add support for Emerald Rapids powercap: intel_rapl: add support for Meteor Lake powercap: fix possible name leak in powercap_register_zone() * pm-domains: PM: domains: fix memory leak with using debugfs_lookup() * pm-em: PM: EM: fix memory leak with using debugfs_lookup() * pm-opp: OPP: fix error checking in opp_migrate_dentry() dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array drivers/opp: Remove "select SRCU" dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example |
||
|
Rafael J. Wysocki
|
7e71a13353 |
Merge branches 'pm-cpuidle', 'pm-core' and 'pm-sleep'
Merge cpuidle updates, PM core updates and changes related to system sleep handling for 6.3-rc1: - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski). - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() which allows MWAIT to be used (Li RongQing). - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy). - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann). - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh). - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki). - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski). - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald). - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald). - Drop "select SRCU" from system sleep Kconfig (Paul E. McKenney). - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap). * pm-cpuidle: cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies intel_idle: add Emerald Rapids Xeon support cpuidle-haltpoll: Replace default_idle() with arch_cpu_idle() cpuidle-haltpoll: select haltpoll governor cpuidle: teo: Introduce util-awareness cpuidle: teo: Optionally skip polling states in teo_find_shallower_state() * pm-core: PM: Add EXPORT macros for exporting PM functions PM: runtime: Document that force_suspend() is incompatible with SMART_SUSPEND * pm-sleep: PM: sleep: Remove "select SRCU" PM: hibernate: swap: don't use /** for non-kernel-doc comments |
||
Munehisa Kamata
|
c2dbe32d5d |
sched/psi: Fix use-after-free in ep_remove_wait_queue()
If a non-root cgroup gets removed when there is a thread that registered
trigger and is polling on a pressure file within the cgroup, the polling
waitqueue gets freed in the following path:
do_rmdir
cgroup_rmdir
kernfs_drain_open_files
cgroup_file_release
cgroup_pressure_release
psi_trigger_destroy
However, the polling thread still has a reference to the pressure file and
will access the freed waitqueue when the file is closed or upon exit:
fput
ep_eventpoll_release
ep_free
ep_remove_wait_queue
remove_wait_queue
This results in use-after-free as pasted below.
The fundamental problem here is that cgroup_file_release() (and
consequently waitqueue's lifetime) is not tied to the file's real lifetime.
Using wake_up_pollfree() here might be less than ideal, but it is in line
with the comment at commit
|
||
|
Thomas Gleixner
|
d125d1349a |
alarmtimer: Prevent starvation by small intervals and SIG_IGN
syzbot reported a RCU stall which is caused by setting up an alarmtimer with a very small interval and ignoring the signal. The reproducer arms the alarm timer with a relative expiry of 8ns and an interval of 9ns. Not a problem per se, but that's an issue when the signal is ignored because then the timer is immediately rearmed because there is no way to delay that rearming to the signal delivery path. See posix_timer_fn() and commit |
||
Marc Zyngier
|
7135b35fc9 |
Merge branch irq/irqdomain-locking into irq/irqchip-next
* irq/irqdomain-locking: : . : irqdomain locking overhaul courtesy of Johan Hovold. : : From the cover letter: : : "Parallel probing (e.g. due to asynchronous probing) of devices that : share interrupts can currently result in two mappings for the same : hardware interrupt to be created. : : This series fixes this mapping race and reworks the irqdomain locking so : that in the end the global irq_domain_mutex is only used for managing : the likewise global irq_domain_list, while domain operations (e.g. IRQ : allocations) use per-domain (hierarchy) locking." : . irqdomain: Switch to per-domain locking irqchip/mvebu-odmi: Use irq_domain_create_hierarchy() irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy() irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy() irqchip/gic-v3-its: Use irq_domain_create_hierarchy() irqchip/gic-v2m: Use irq_domain_create_hierarchy() irqchip/alpine-msi: Use irq_domain_add_hierarchy() x86/uv: Use irq_domain_create_hierarchy() x86/ioapic: Use irq_domain_create_hierarchy() irqdomain: Clean up irq_domain_push/pop_irq() irqdomain: Drop leftover brackets irqdomain: Drop dead domain-name assignment irqdomain: Drop revmap mutex irqdomain: Fix domain registration race irqdomain: Fix mapping-creation race irqdomain: Refactor __irq_domain_alloc_irqs() irqdomain: Look for existing mapping only once irqdomain: Drop bogus fwspec-mapping error handling irqdomain: Fix disassociation race irqdomain: Fix association race Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
Johan Hovold
|
9dbb8e3452 |
irqdomain: Switch to per-domain locking
The IRQ domain structures are currently protected by the global irq_domain_mutex. Switch to using more fine-grained per-domain locking, which can speed up parallel probing by reducing lock contention. On a recent arm64 laptop, the total time spent waiting for the locks during boot drops from 160 to 40 ms on average, while the maximum aggregate wait time drops from 550 to 90 ms over ten runs for example. Note that the domain lock of the root domain (innermost domain) must be used for hierarchical domains. For non-hierarchical domains (as for root domains), the new root pointer is set to the domain itself so that &domain->root->mutex always points to the right lock. Also note that hierarchical domains should be constructed using irq_domain_create_hierarchy() (or irq_domain_add_hierarchy()) to avoid having racing allocations access a not fully initialised domain. As a safeguard, the lockdep assertion in irq_domain_set_mapping() will catch any offenders that also fail to set the root domain pointer. Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-21-johan+linaro@kernel.org |
||
|
Johan Hovold
|
930a1bbbef |
irqdomain: Clean up irq_domain_push/pop_irq()
The irq_domain_push_irq() interface is used to add a new (outmost) level to a hierarchical domain after IRQs have been allocated. Possibly due to differing mental images of hierarchical domains, the names used for the irq_data variables make these functions much harder to understand than what they need to be. Rename the struct irq_data pointer to the data embedded in the descriptor as simply 'irq_data' and refer to the data allocated by this interface as 'parent_irq_data' so that the names reflect how hierarchical domains are implemented. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-12-johan+linaro@kernel.org |
||
|
Johan Hovold
|
4e0d86df93 |
irqdomain: Drop leftover brackets
Drop some unnecessary brackets that were left in place when the corresponding code was updated. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-11-johan+linaro@kernel.org |
||
|
Johan Hovold
|
28a9ff23d8 |
irqdomain: Drop dead domain-name assignment
Since commit
|
||
|
Johan Hovold
|
47d1932f37 |
irqdomain: Drop revmap mutex
The revmap mutex is essentially only used to maintain the integrity of the radix tree during updates (lookups use RCU). As the global irq_domain_mutex is now held in all paths that update the revmap structures there is strictly no longer any need for the dedicated mutex, which can be removed. Drop the revmap mutex and add lockdep assertions to the revmap helpers to make sure that the global lock is always held when updating the revmap. Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-9-johan+linaro@kernel.org |
||
|
Marc Zyngier
|
8932c32c30 |
irqdomain: Fix domain registration race
Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.
This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.
Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).
Fixes:
|
||
|
Johan Hovold
|
601363cc08 |
irqdomain: Fix mapping-creation race
Parallel probing of devices that share interrupts (e.g. when a driver uses asynchronous probing) can currently result in two mappings for the same hardware interrupt to be created due to missing serialisation. Make sure to hold the irq_domain_mutex when creating mappings so that looking for an existing mapping before creating a new one is done atomically. Fixes: |
||
|
Johan Hovold
|
d55f7f4c58 |
irqdomain: Refactor __irq_domain_alloc_irqs()
Refactor __irq_domain_alloc_irqs() so that it can be called internally
while holding the irq_domain_mutex.
This will be used to fix a shared-interrupt mapping race, hence the
Fixes tag.
Fixes:
|
||
|
Johan Hovold
|
6e6f75c9c9 |
irqdomain: Look for existing mapping only once
Avoid looking for an existing mapping twice when creating a new mapping
using irq_create_fwspec_mapping() by factoring out the actual allocation
which is shared with irq_create_mapping_affinity().
The new helper function will also be used to fix a shared-interrupt
mapping race, hence the Fixes tag.
Fixes:
|
||
|
Johan Hovold
|
e3b7ab025e |
irqdomain: Drop bogus fwspec-mapping error handling
In case a newly allocated IRQ ever ends up not having any associated
struct irq_data it would not even be possible to dispose the mapping.
Replace the bogus disposal with a WARN_ON().
This will also be used to fix a shared-interrupt mapping race, hence the
CC-stable tag.
Fixes:
|
||
|
Johan Hovold
|
3f883c38f5 |
irqdomain: Fix disassociation race
The global irq_domain_mutex is held when mapping interrupts from
non-hierarchical domains but currently not when disposing them.
This specifically means that updates of the domain mapcount is racy
(currently only used for statistics in debugfs).
Make sure to hold the global irq_domain_mutex also when disposing
mappings from non-hierarchical domains.
Fixes:
|
||
|
Johan Hovold
|
b06730a571 |
irqdomain: Fix association race
The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.
Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.
Fixes:
|
||
|
Thomas Gleixner
|
ab407a1919 |
Clocksource watchdog commits for v6.3
This pull request contains the following:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
-----BEGIN PGP SIGNATURE-----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=OWY2
-----END PGP SIGNATURE-----
Merge tag 'clocksource.2023.02.06b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into timers/core
Pull clocksource watchdog changes from Paul McKenney:
o Improvements to clocksource-watchdog console messages.
o Loosening of the clocksource-watchdog skew criteria to match
those of NTP (500 parts per million, relaxed from 400 parts
per million). If it is good enough for NTP, it is good enough
for the clocksource watchdog.
o Suspend clocksource-watchdog checking temporarily when high
memory latencies are detected. This avoids the false-positive
clock-skew events that have been seen on production systems
running memory-intensive workloads.
o On systems where the TSC is deemed trustworthy, use it as the
watchdog timesource, but only when specifically requested using
the tsc=watchdog kernel boot parameter. This permits clock-skew
events to be detected, but avoids forcing workloads to use the
slow HPET and ACPI PM timers. These last two timers are slow
enough to cause systems to be needlessly marked bad on the one
hand, and real skew does sometimes happen on production systems
running production workloads on the other. And sometimes it is
the fault of the TSC, or at least of the firmware that told the
kernel to program the TSC with the wrong frequency.
o Add a tsc=revalidate kernel boot parameter to allow the kernel
to diagnose cases where the TSC hardware works fine, but was told
by firmware to tick at the wrong frequency. Such cases are rare,
but they really have happened on production systems.
Link: https://lore.kernel.org/r/20230210193640.GA3325193@paulmck-ThinkPad-P17-Gen-1
|
||
Waiman Long
|
df14b7f9ef |
sched/core: Fix a missed update of user_cpus_ptr
Since commit |
||
Peter Zijlstra
|
eedeb787eb |
freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL
Tetsuo-San noted that commit |
||
Steven Rostedt (Google)
|
70b5339caf |
tracing: Make trace_define_field_ext() static
trace_define_field_ext() is not used outside of trace_events.c, it should
be static.
Link: https://lore.kernel.org/oe-kbuild-all/202302130750.679RaRog-lkp@intel.com/
Fixes:
|
||
|
Linus Torvalds
|
5e98e916f9 |
tracing: Fix showing of TASK_COMM_LEN instead of its value
The TASK_COMM_LEN was converted from a macro into an enum so that BTF would have access to it. But this unfortunately caused TASK_COMM_LEN to display in the format fields of trace events, as they are created by the TRACE_EVENT() macro and such, macros convert to their values, where as enums do not. To handle this, instead of using the field itself to be display, save the value of the array size as another field in the trace_event_fields structure, and use that instead. Not only does this fix the issue, but also converts the other trace events that have this same problem (but were not breaking tooling). With this change, the original work around |
||
Yafang Shao
|
b6c7abd1c2 |
tracing: Fix TASK_COMM_LEN in trace event format file
After commit |
||
|
Linus Torvalds
|
338c847304 |
Fix an rtmutex missed-wakeup bug.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmPnV1wRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gWxg/8D6jl/Wl/16LkcnLk8eRWGmF34u24lGPK d8T9VN0fF0Pnz0vQVNyuhpdSARX1PvaOAyvx/gv0KE+OjeNYdXWTHavNEekpBeKA 0XFrw2xoa+M7kJE1LswARk23ynFtLZoFD05G3fNZ6NxK/uxRepZzxUyAmwYE9ibG 9gekg+IeTysaCtmIKHkCOgcLvSy41/JEJMtA3CHA3Bww/CdPd5JSc9ERqZKYCp3L lVHNtmTZotZ4TA0Dzgx+OgF1JtoQqQyerPQVhkXjmq0MnTJLjKWnvesF2gBcFLHS 6rovr3eCaO2dm7KGsFlt8Ne6FYEd1us1ifK166xoJgRV+TFFpf2UoDZkEhiCOL63 5x3S35wOuKopsBT4IHK5j2LTfhT8KTFSOsZMN41EPhvYYY5/n1EOrHSvFQKmwEFO jbVvAWHY56YGKH54qePULb+hSrAR1V+AO2ceghusg9BhT4IQ72aR0vkv4hbxd/Zh mufUd5E3+vWLOVbYM7e3ZGFiC6DA/QVZkTvVxKIllE0bzJkGKI80ITeLbjAxFFmp OCs+stGij+SwOxEWfK+I0qz6ae8mL/lgWUr7hhkAi8LXGA/t5q1jErCULZFiPr+6 vugrk2SeQZOEVvfUb0/U3GUdn01yGHak7sz7wJBsd++y8I8FR9q6fb7kawgMCo4I ZydwCwXat2I= =sfDB -----END PGP SIGNATURE----- Merge tag 'locking-urgent-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "Fix an rtmutex missed-wakeup bug" * tag 'locking-urgent-2023-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtmutex: Ensure that the top waiter is always woken up |
||
Pietro Borrello
|
7c4a5b89a0 |
sched/rt: pick_next_rt_entity(): check list_entry
Commit |
||
Valentin Schneider
|
7ea98dfa44 |
sched/deadline: Add more reschedule cases to prio_changed_dl()
I've been tracking down an issue on a ~5.17ish kernel where:
CPUx CPUy
<DL task p0 owns an rtmutex M>
<p0 depletes its runtime, gets throttled>
<rq switches to the idle task>
<DL task p1 blocks on M, boost/replenish p0>
<No call to resched_curr() happens here>
[idle task keeps running here until *something*
accidentally sets TIF_NEED_RESCHED]
On that kernel, it is quite easy to trigger using rt-tests's deadline_test
[1] with the test running on isolated CPUs (this reduces the chance of
something unrelated setting TIF_NEED_RESCHED on the idle tasks, making the
issue even more obvious as the hung task detector chimes in).
I haven't been able to reproduce this using a mainline kernel, even if I
revert
|
||
Zhang Qiao
|
829c1651e9 |
sched/fair: sanitize vruntime of entity being placed
When a scheduling entity is placed onto cfs_rq, its vruntime is pulled to the base level (around cfs_rq->min_vruntime), so that the entity doesn't gain extra boost when placed backwards. However, if the entity being placed wasn't executed for a long time, its vruntime may get too far behind (e.g. while cfs_rq was executing a low-weight hog), which can inverse the vruntime comparison due to s64 overflow. This results in the entity being placed with its original vruntime way forwards, so that it will effectively never get to the cpu. To prevent that, ignore the vruntime of the entity being placed if it didn't execute for much longer than the characteristic sheduler time scale. [rkagan: formatted, adjusted commit log, comments, cutoff value] Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Co-developed-by: Roman Kagan <rkagan@amazon.de> Signed-off-by: Roman Kagan <rkagan@amazon.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20230130122216.3555094-1-rkagan@amazon.de |
||
Vincent Guittot
|
a2e90611b9 |
sched/fair: Remove capacity inversion detection
Remove the capacity inversion detection which is now handled by util_fits_cpu() returning -1 when we need to continue to look for a potential CPU with better performance. This ends up almost reverting patches below except for some comments: commit |
||
|
Vincent Guittot
|
e5ed0550c0 |
sched/fair: unlink misfit task from cpu overutilized
By taking into account uclamp_min, the 1:1 relation between task misfit and cpu overutilized is no more true as a task with a small util_avg may not fit a high capacity cpu because of uclamp_min constraint. Add a new state in util_fits_cpu() to reflect the case that task would fit a CPU except for the uclamp_min hint which is a performance requirement. Use -1 to reflect that a CPU doesn't fit only because of uclamp_min so we can use this new value to take additional action to select the best CPU that doesn't match uclamp_min hint. When util_fits_cpu() returns -1, we will continue to look for a possible CPU with better performance, which replaces Capacity Inversion detection with capacity_orig_of() - thermal_load_avg to detect a capacity inversion. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-and-tested-by: Qais Yousef <qyousef@layalina.io> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Link: https://lore.kernel.org/r/20230201143628.270912-2-vincent.guittot@linaro.org |
||
Greg Kroah-Hartman
|
a0e8c13ccd |
PM: EM: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Greg Kroah-Hartman
|
5b268d8aba |
time/debug: Fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.org |