Allow for the creation of a file descriptor in two steps: first, we
reserve a slot for it, then we commit or drop the reservation. The first
step may fail (e.g., the current process ran out of available slots),
but commit and drop never fail (and are mutually exclusive).
This is needed by Rust Binder when fds are sent from one process to
another. It has to be a two-step process to properly handle the case
where multiple fds are sent: The operation must fail or succeed
atomically, which we achieve by first reserving the fds we need, and
only installing the files once we have reserved enough fds to send the
files.
Fd reservations assume that the value of `current` does not change
between the call to get_unused_fd_flags and the call to fd_install (or
put_unused_fd). By not implementing the Send trait, this abstraction
ensures that the `FileDescriptorReservation` cannot be moved into a
different process.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-6-88484f7a3dcf@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add an abstraction for viewing the string representation of a security
context.
This is needed by Rust Binder because it has a feature where a process
can view the string representation of the security context for incoming
transactions. The process can use that to authenticate incoming
transactions, and since the feature is provided by the kernel, the
process can trust that the security context is legitimate.
This abstraction makes the following assumptions about the C side:
* When a call to `security_secid_to_secctx` is successful, it returns a
pointer and length. The pointer references a byte string and is valid
for reading for that many bytes.
* The string may be referenced until `security_release_secctx` is
called.
* If CONFIG_SECURITY is set, then the three methods mentioned in
rust/helpers are available without a helper. (That is, they are not a
#define or `static inline`.)
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-5-88484f7a3dcf@google.com
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a wrapper around `struct cred` called `Credential`, and provide
functionality to get the `Credential` associated with a `File`.
Rust Binder must check the credentials of processes when they attempt to
perform various operations, and these checks usually take a
`&Credential` as parameter. The security_binder_set_context_mgr function
would be one example. This patch is necessary to access these security_*
methods from Rust.
This Rust abstraction makes the following assumptions about the C side:
* `struct cred` is refcounted with `get_cred`/`put_cred`.
* It's okay to transfer a `struct cred` across threads, that is, you do
not need to call `put_cred` on the same thread as where you called
`get_cred`.
* The `euid` field of a `struct cred` never changes after
initialization.
* The `f_cred` field of a `struct file` never changes after
initialization.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-4-88484f7a3dcf@google.com
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This abstraction makes it possible to manipulate the open files for a
process. The new `File` struct wraps the C `struct file`. When accessing
it using the smart pointer `ARef<File>`, the pointer will own a
reference count to the file. When accessing it as `&File`, then the
reference does not own a refcount, but the borrow checker will ensure
that the reference count does not hit zero while the `&File` is live.
Since this is intended to manipulate the open files of a process, we
introduce an `fget` constructor that corresponds to the C `fget`
method. In future patches, it will become possible to create a new fd in
a process and bind it to a `File`. Rust Binder will use these to send
fds from one process to another.
We also provide a method for accessing the file's flags. Rust Binder
will use this to access the flags of the Binder fd to check whether the
non-blocking flag is set, which affects what the Binder ioctl does.
This introduces a struct for the EBADF error type, rather than just
using the Error type directly. This has two advantages:
* `File::fget` returns a `Result<ARef<File>, BadFdError>`, which the
compiler will represent as a single pointer, with null being an error.
This is possible because the compiler understands that `BadFdError`
has only one possible value, and it also understands that the
`ARef<File>` smart pointer is guaranteed non-null.
* Additionally, we promise to users of the method that the method can
only fail with EBADF, which means that they can rely on this promise
without having to inspect its implementation.
That said, there are also two disadvantages:
* Defining additional error types involves boilerplate.
* The question mark operator will only utilize the `From` trait once,
which prevents you from using the question mark operator on
`BadFdError` in methods that return some third error type that the
kernel `Error` is convertible into. (However, it works fine in methods
that return `Error`.)
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-3-88484f7a3dcf@google.com
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Introduces a safe function for getting a raw pointer to the current
task.
When writing bindings that need to access the current task, it is often
more convenient to call a method that directly returns a raw pointer
than to use the existing `Task::current` method. However, the only way
to do that is `bindings::get_current()` which is unsafe since it calls
into C. By introducing `Task::current_raw()`, it becomes possible to
obtain a pointer to the current task without using unsafe.
Link: https://lore.kernel.org/all/CAH5fLgjT48X-zYtidv31mox3C4_Ogoo_2cBOCmX0Ang3tAgGHA@mail.gmail.com/
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-2-88484f7a3dcf@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
This introduces a new marker type for types that shouldn't be thread
safe. By adding a field of this type to a struct, it becomes non-Send
and non-Sync, which means that it cannot be accessed in any way from
threads other than the one it was created on.
This is useful for APIs that require globals such as `current` to remain
constant while the value exists.
We update two existing users in the Kernel to use this helper:
* `Task::current()` - moving the return type of this value to a
different thread would not be safe as you can no longer be guaranteed
that the `current` pointer remains valid.
* Lock guards. Mutexes and spinlocks should be unlocked on the same
thread as where they were locked, so we enforce this using the Send
trait.
There are also additional users in later patches of this patchset. See
[1] and [2] for the discussion that led to the introduction of this
patch.
Link: https://lore.kernel.org/all/nFDPJFnzE9Q5cqY7FwSMByRH2OAn_BpI4H53NQfWIlN6I2qfmAqnkp2wRqn0XjMO65OyZY4h6P4K2nAGKJpAOSzksYXaiAK_FoH_8QbgBI4=@proton.me/ [1]
Link: https://lore.kernel.org/all/nFDPJFnzE9Q5cqY7FwSMByRH2OAn_BpI4H53NQfWIlN6I2qfmAqnkp2wRqn0XjMO65OyZY4h6P4K2nAGKJpAOSzksYXaiAK_FoH_8QbgBI4=@proton.me/ [2]
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240915-alice-file-v10-1-88484f7a3dcf@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the `RUSTC_VERSION_TEXT` rebuild support in place, now proc macros
can depend on that instead of `core.o`.
This means that both the `core` and `macros` crates can be built in
parallel, and that touching `core.o` does not trigger a rebuild of the
proc macros.
This could be accomplished using the same approach as for `core`
(i.e. depending directly on `include/config/RUSTC_VERSION_TEXT`). However,
that is considered an implementation detail [1], and thus it is best
to avoid it. Instead, let fixdep find a string that we explicitly
write down in the source code for this purpose (like it is done for
`include/linux/compiler-version.h`), which we can easily do (unlike for
`core`) since this is our own source code.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQBG0nDupXSgAAk-6nOqeqGVkr3H1RjYaqRJ1OxmLm6xA@mail.gmail.com/ [1]
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that `RUSTC_VERSION_TEXT` exists, use it to rebuild `core` when the
version text changes (which in turn will trigger a rebuild of all the
kernel Rust code).
This also applies to proc macros (which only work with the `rustc` that
compiled them), via the already existing dependency on `core.o`. That
is cleaned up in the next commit.
However, this does not cover host programs written in Rust, which is
the same case in the C side.
This is accomplished by referencing directly the generated file, instead
of using the `fixdep` header trick, since we cannot change the Rust
standard library sources. This is not too much of a burden, since it
only needs to be done for `core`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This mirrors the entry API [1] from the Rust standard library on
`RBTree`. This API can be used to access the entry at a specific key and
make modifications depending on whether the key is vacant or occupied.
This API is useful because it can often be used to avoid traversing the
tree multiple times.
This is used by binder to look up and conditionally access or insert a
value, depending on whether it is there or not [2].
Link: https://doc.rust-lang.org/stable/std/collections/btree_map/enum.Entry.html [1]
Link: https://android-review.googlesource.com/c/kernel/common/+/2849906 [2]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-5-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a cursor interface to `RBTree`, supporting the following use cases:
- Inspect the current node pointed to by the cursor, inspect/move to
it's neighbors in sort order (bidirectionally).
- Mutate the tree itself by removing the current node pointed to by the
cursor, or one of its neighbors.
Add functions to obtain a cursor to the tree by key:
- The node with the smallest key
- The node with the largest key
- The node matching the given key, or the one with the next larger key
The cursor abstraction is needed by the binder driver to efficiently
search for nodes and (conditionally) modify them, as well as their
neighbors [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-6-08ba9197f637@google.com/ [1]
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-4-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add mutable Iterator implementation for `RBTree`,
allowing iteration over (key, value) pairs in key order. Only values are
mutable, as mutating keys implies modifying a node's position in the tree.
Mutable iteration is used by the binder driver during shutdown to
clean up the tree maintained by the "range allocator" [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-6-08ba9197f637@google.com/ [1]
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-3-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Add Iterator implementation for `RBTree`, allowing
iteration over (key, value) pairs in key order.
- Add individual `keys()` and `values()` functions to iterate over keys
or values alone.
- Update doctests to use iteration instead of explicitly getting items.
Iteration is needed by the binder driver to enumerate all values in a
tree for oneway spam detection [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-17-08ba9197f637@google.com/ [1]
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-2-014561758a57@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The rust rbtree exposes a map-like interface over keys and values,
backed by the kernel red-black tree implementation. Values can be
inserted, deleted, and retrieved from a `RBTree` by key.
This base abstraction is used by binder to store key/value
pairs and perform lookups, for example the patch
"[PATCH RFC 03/20] rust_binder: add threading support"
in the binder RFC [1].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-3-08ba9197f637@google.com/ [1]
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240822-b4-rbtree-v12-1-014561758a57@google.com
[ Updated link to docs.kernel.org. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.56.0 [1], rustdoc introduced the "jump to definition"
feature [2], i.e. the unstable flag `--generate-link-to-definition`.
It adds links to the source view of the documentation.
For instance, in the source view of `rust/kernel/sync.rs`, for this code:
impl Default for LockClassKey {
fn default() -> Self {
Self::new()
}
}
It will add three hyperlinks:
- `Default` points to the rendered "Trait `core::default::Default`"
page (not the source view, since it goes to another crate, though
this may change).
- `LockClassKey` points to the `pub struct LockClassKey(...);` line
in the same page, highlighting the line number.
- `Self::new()` points to the `pub const fn new() -> Self { ... }`
associated function, highlighting its line numbers (i.e. for the
full function).
This makes the source view more useful and a bit closer to the experience
in e.g. the Elixir Cross Referencer [3].
I have provisionally enabled it for rust.docs.kernel.org [4] -- one can
take a look at the source view there for an example of how it looks like.
Thus enable it.
Cc: Guillaume Gomez <guillaume1.gomez@gmail.com>
Link: https://github.com/rust-lang/rust/pull/84176 [1]
Link: https://github.com/rust-lang/rust/issues/89095 [2]
Link: https://elixir.bootlin.com [3]
Link: https://rust.docs.kernel.org [4]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240818141249.387166-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a method for `ARef` that is analogous to `Arc::into_raw`. It is the
inverse operation of `ARef::from_raw`, and allows you to convert the
`ARef` back into a raw pointer while retaining ownership of the
refcount.
This new function will be used by [1] for converting the type in an
`ARef` using `ARef::from_raw(ARef::into_raw(me).cast())`. Alice has
also needed the same function for other use-cases in the past, but [1]
is the first to go upstream.
This was implemented independently by Kartik and Alice. The two versions
were merged by Alice, so all mistakes are Alice's.
Link: https://lore.kernel.org/r/20240801-vma-v3-1-db6c1c0afda9@google.com [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1044
Signed-off-by: Kartik Prajapati <kartikprajapati987@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
[ Reworded to correct the author reference and changed tag to Link
since it is not a bug. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use links to docs.kernel.org instead of www.kernel.org/doc/html/latest
in the code documentation. The links are shorter and cleaner.
Link: https://github.com/Rust-for-Linux/linux/issues/1101
Signed-off-by: Michael Vetter <jubalh@iodoru.org>
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
One way to explain what `ListArc` does is that it controls exclusive
access to the prev/next pointer field in a refcounted object. The
feature of having a special reference to a refcounted object with
exclusive access to specific fields is useful for other things, so
provide a general utility for that.
This is used by Rust Binder to keep track of which processes have a
reference to a given node. This involves an object for each process/node
pair, that is referenced by both the process and the node. For some
fields in this object, only the process's reference needs to access
them (and it needs mutable access), so Binder uses a ListArc to give the
process's reference exclusive access.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-10-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support linked lists that can hold many different structs at once. This
is generally done using trait objects. The main challenge is figuring
what the struct is given only a pointer to the ListLinks.
We do this by storing a pointer to the struct next to the ListLinks
field. The container_of operation will then just read that pointer. When
the type is a trait object, that pointer will be a fat pointer whose
metadata is a vtable that tells you what kind of struct it is.
Heterogeneous lists are heavily used by Rust Binder. There are a lot of
so-called todo lists containing various events that need to be delivered
to userspace next time userspace calls into the driver. And there are
quite a few different todo item types: incoming transaction, changes to
refcounts, death notifications, and more.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-9-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The cursor is very similar to the list iterator, but it has one
important feature that the iterator doesn't: it can be used to remove
items from the linked list.
This feature cannot be added to the iterator because the references you
get from the iterator are considered borrows of the original list,
rather than borrows of the iterator. This means that there's no way to
prevent code like this:
let item = iter.next();
iter.remove();
use(item);
If `iter` was a cursor instead of an iterator, then `item` will be
considered a borrow of `iter`. Since `remove` destroys `iter`, this
means that the borrow-checker will prevent uses of `item` after the call
to `remove`.
So there is a trade-off between supporting use in traditional for loops,
and supporting removal of elements as you iterate. Iterators and cursors
represents two different choices on that spectrum.
Rust Binder needs cursors for the list of death notifications that a
process is currently handling. When userspace tells Binder that it has
finished processing the death notification, Binder will iterate the list
to search for the relevant item and remove it.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-8-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust Binder has lists containing stuff such as all contexts or all
processes, and sometimes needs to iterate over them. This patch enables
Rust Binder to do that using a normal for loop.
The iterator returns the ArcBorrow type, so it is possible to grab a
refcount to values while iterating.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-7-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the actual linked list itself.
The linked list uses the following design: The List type itself just has
a single pointer to the first element of the list. And the actual list
items then form a cycle. So the last item is `first->prev`.
This is slightly different from the usual kernel linked list. Matching
that exactly would amount to giving List two pointers, and having it be
part of the cycle of items. This alternate design has the advantage that
the cycle is never completely empty, which can reduce the number of
branches in some cases. However, it also has the disadvantage that List
must be pinned, which this design is trying to avoid.
Having the list items form a cycle rather than having null pointers at
the beginning/end is convenient for several reasons. For one, it lets us
store only one pointer in List, and it simplifies the implementation of
several functions.
Unfortunately, the `remove` function that removes an arbitrary element
from the list has to be unsafe. This is needed because there is no way
to handle the case where you pass an element from the wrong list. For
example, if it is the first element of some other list, then that other
list's `first` pointer would not be updated. Similarly, it could be a
data race if you try to remove it from two different lists in parallel.
(There's no problem with passing `remove` an item that's not in any
list. Additionally, other removal methods such as `pop_front` need not
be unsafe, as they can't be used to remove items from another list.)
A future patch in this series will introduce support for cursors that
can be used to remove arbitrary items without unsafe code.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-6-f5f5e8075da0@google.com
[ Fixed a few typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Adds a macro for safely implementing the ListItem trait. As part of the
implementation of the macro, we also provide a HasListLinks trait
similar to the workqueue's HasWorkItem trait.
The HasListLinks trait is only necessary if you are implementing
ListItem using the impl_list_item macro.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-5-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Define the ListLinks struct, which wraps the prev/next pointers that
will be used to insert values into a List in a future patch. Also
define the ListItem trait, which is implemented by structs that have a
ListLinks field.
The ListItem trait provides four different methods that are all
essentially container_of or the reverse of container_of. Two of them are
used before inserting/after removing an item from the list, and the two
others are used when looking at a value without changing whether it is
in a list. This distinction is introduced because it is needed for the
patch that adds support for heterogeneous lists, which are implemented
by adding a third pointer field with a fat pointer to the full struct.
When inserting into the heterogeneous list, the pointer-to-self is
updated to have the right vtable, and the container_of operation is
implemented by just returning that pointer instead of using the real
container_of operation.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-4-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the ability to track whether a ListArc exists for a given value,
allowing for the creation of ListArcs without going through UniqueArc.
The `impl_list_arc_safe!` macro is extended with a `tracked_by` strategy
that defers the tracking of ListArcs to a field of the struct.
Additionally, the AtomicListArcTracker type is introduced, which can
track whether a ListArc exists using an atomic. By deferring the
tracking to a field of type AtomicListArcTracker, structs gain the
ability to create ListArcs without going through a UniqueArc.
Rust Binder uses this for some objects where we want to be able to
insert them into a linked list at any time. Using the
AtomicListArcTracker, we are able to check whether an item is already in
the list, and if not, we can create a `ListArc` and push it.
The macro has the ability to defer the tracking of ListArcs to a field,
using whatever strategy that field has. Since we don't add any
strategies other than AtomicListArcTracker, another similar option would
be to hard-code that the field should be an AtomicListArcTracker.
However, Rust Binder has a case where the AtomicListArcTracker is not
stored directly in the struct, but in a sub-struct. Furthermore, the
outer struct is generic:
struct Wrapper<T: ?Sized> {
links: ListLinks,
inner: T,
}
Here, the Wrapper struct implements ListArcSafe with `tracked_by inner`,
and then the various types used with `inner` also uses the macro to
implement ListArcSafe. Some of them use the untracked strategy, and some
of them use tracked_by with an AtomicListArcTracker. This way, Wrapper
just inherits whichever choice `inner` has made.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-3-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `ListArc` type can be thought of as a special reference to a
refcounted object that owns the permission to manipulate the
`next`/`prev` pointers stored in the refcounted object. By ensuring that
each object has only one `ListArc` reference, the owner of that
reference is assured exclusive access to the `next`/`prev` pointers.
When a `ListArc` is inserted into a `List`, the `List` takes ownership
of the `ListArc` reference.
There are various strategies for ensuring that a value has only one
`ListArc` reference. The simplest is to convert a `UniqueArc` into a
`ListArc`. However, the refcounted object could also keep track of
whether a `ListArc` exists using a boolean, which could allow for the
creation of new `ListArc` references from an `Arc` reference. Whatever
strategy is used, the relevant tracking is referred to as "the tracking
inside `T`", and the `ListArcSafe` trait (and its subtraits) are used to
update the tracking when a `ListArc` is created or destroyed.
Note that we allow the case where the tracking inside `T` thinks that a
`ListArc` exists, but actually, there isn't a `ListArc`. However, we do
not allow the opposite situation where a `ListArc` exists, but the
tracking thinks it doesn't. This is because the former can at most
result in us failing to create a `ListArc` when the operation could
succeed, whereas the latter can result in the creation of two `ListArc`
references. Only the latter situation can lead to memory safety issues.
This patch introduces the `impl_list_arc_safe!` macro that allows you to
implement `ListArcSafe` for types using the strategy where a `ListArc`
can only be created from a `UniqueArc`. Other strategies are introduced
in later patches.
This is part of the linked list that Rust Binder will use for many
different things. The strategy where a `ListArc` can only be created
from a `UniqueArc` is actually sufficient for most of the objects that
Rust Binder needs to insert into linked lists. Usually, these are todo
items that are created and then immediately inserted into a queue.
The const generic ID allows objects to have several prev/next pointer
pairs so that the same object can be inserted into several different
lists. You are able to have several `ListArc` references as long as they
correspond to different pointer pairs. The ID itself is purely a
compile-time concept and will not be present in the final binary. Both
the `List` and the `ListArc` will need to agree on the ID for them to
work together. Rust Binder uses this in a few places (e.g. death
recipients) where the same object can be inserted into both generic todo
lists and some other lists for tracking the status of the object.
The ID is a const generic rather than a type parameter because the
`pair_from_unique` method needs to be able to assert that the two ids
are different. There's no easy way to assert that when using types
instead of integers.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-2-f5f5e8075da0@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a macro to statically check if a field of a struct is marked with
`#[pin]` ie that it is structurally pinned. This can be used when
`unsafe` code needs to rely on fields being structurally pinned.
The macro has a special "inline" mode for the case where the type
depends on generic parameters from the surrounding scope.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240814-linked-list-v5-1-f5f5e8075da0@google.com
[ Replaced `compile_fail` with `ignore` and a TODO note. Removed
`pub` from example to clean `unreachable_pub` lint. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sometimes it is necessary to split allocation and initialization into
two steps. One such situation is when reusing existing allocations
obtained via `Box::drop_contents`. See [1] for an example.
In order to support this use case add `write_[pin_]init` functions to the
pin-init API. These functions operate on already allocated smart
pointers that wrap `MaybeUninit<T>`.
Link: https://lore.kernel.org/rust-for-linux/f026532f-8594-4f18-9aa5-57ad3f5bc592@proton.me/ [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240819112415.99810-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sometimes (see [1]) it is necessary to drop the value inside of a
`Box<T>`, but retain the allocation. For example to reuse the allocation
in the future.
Introduce a new function `drop_contents` that turns a `Box<T>` into
`Box<MaybeUninit<T>>` by dropping the value.
Link: https://lore.kernel.org/rust-for-linux/20240418-b4-rbtree-v3-5-323e134390ce@google.com/ [1]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240819112415.99810-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`bindgen` is able to detect certain function attributes and annotate
functions correspondingly in its output for the Rust side, when the
`--enable-function-attribute-detection` is passed.
In particular, it is currently able to use `__must_check` in C
(`#[must_use]` in Rust), which give us a bunch of annotations that are
nice to have to prevent possible issues in Rust abstractions, e.g.:
extern "C" {
+ #[must_use]
pub fn kobject_add(
kobj: *mut kobject,
parent: *mut kobject,
fmt: *const core::ffi::c_char,
...
) -> core::ffi::c_int;
}
Apparently, there are edge cases where this can make generation very slow,
which is why it is behind a flag [1], but it does not seem to affect us
in any major way at the moment.
Thus enable it.
Link: https://github.com/rust-lang/rust-bindgen/issues/1465 [1]
Link: https://lore.kernel.org/rust-for-linux/CANiq72=u5Nrz_NW3U3_VqywJkD8pECA07q2pFDd1wjtXOWdkAQ@mail.gmail.com/
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20240814163722.1550064-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The headers in this file are sorted alphabetically, which makes it
easy to quickly resolve conflicts by selecting all of the headers and
invoking :'<,'>sort to sort them. To keep this technique to resolve
conflicts working, also apply sorting to symbols that are not letters.
This file is very prone to merge conflicts, so I think keeping conflict
resolution really easy is more important than not messing with git blame
history.
These includes were originally introduced in commit 3253aba340 ("rust:
block: introduce `kernel::block::mq` module").
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20240809132835.274603-1-aliceryhl@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This removes the need to explicitly export all symbols.
Generate helper exports similarly to what's currently done for Rust
crates. These helpers are exclusively called from within Rust code and
therefore can be treated similar as other Rust symbols.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240817165302.3852499-1-gary@garyguo.net
[ Fixed dependency path, reworded slightly, edited comment a bit and
rebased on top of the changes made when applying Andreas' patch
(e.g. no `README.md` anymore, so moved the edits). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that we should be `objtool`-warning free, enable `objtool` for
Rust too.
Before this patch series, we were already getting warnings under e.g. IBT
builds, since those would see Rust code via `vmlinux.o`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-7-ojeda@kernel.org
[ Solved trivial conflict. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the equivalent of the `___ADDRESSABLE()` annotation in the
`module_{init,exit}` macros to the Rust `module!` macro.
Without this, `objtool` would complain if enabled for Rust (under IBT
builds), e.g.:
samples/rust/rust_print.o: warning: objtool: cleanup_module(): not an indirect call target
samples/rust/rust_print.o: warning: objtool: init_module(): not an indirect call target
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This patch splits up the rust helpers C file. When rebasing patch sets on
upstream linux, merge conflicts in helpers.c is common and time consuming
[1]. Thus, split the file so that each kernel component can live in a
separate file.
This patch lists helper files explicitly and thus conflicts in the file
list is still likely. However, they should be more simple to resolve than
the conflicts usually seen in helpers.c.
[ Removed `README.md` and undeleted the original comment since now,
in v3 of the series, we have a `helpers.c` again; which also allows
us to keep the "Sorted alphabetically" line and makes the diff easier.
In addition, updated the Documentation/ mentions of the file, reworded
title and removed blank lines at the end of `page.c`. - Miguel ]
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/288089-General/topic/Splitting.20up.20helpers.2Ec/near/426694012 [1]
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240815103016.2771842-1-nmi@metaspace.dk
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For the new Rust support for 32-bit arm [1], Clippy warns:
error: useless conversion to the same type: `i32`
--> rust/kernel/error.rs:139:36
|
139 | unsafe { bindings::ERR_PTR(self.0.into()) as *mut _ }
| ^^^^^^^^^^^^^ help: consider removing `.into()`: `self.0`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::useless_conversion)]`
The `self.0.into()` converts an `c_int` into `ERR_PTR`'s parameter
which is a `c_long`. Thus, both types are `i32` in 32-bit. Therefore,
allow it for those architectures.
Link: https://lore.kernel.org/rust-for-linux/2dbd1491-149d-443c-9802-75786a6a3b73@gmail.com/ [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20240730155702.1110144-1-ojeda@kernel.org
[ Fixed typo in tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are no guarantees for the pointer returned by `into_foreign`.
This is simply because there is no safety documentation stating any
guarantees. Therefore dereferencing and all other operations for that
pointer are not allowed in a general context (i.e. when the concrete
type implementing the trait is not known).
This might be confusing, therefore add normal documentation to state
that there are no guarantees given for the pointer.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240730182251.1466684-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We already implement ForeignOwnable for Box<T>, but it may be useful to
store pinned data in a ForeignOwnable container. This patch makes that
possible.
This will be used together with upcoming miscdev abstractions, which
Binder will use when binderfs is disabled.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240730-foreign-ownable-pin-box-v1-1-b1d70cdae541@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For pinned and unpinned initialization of structs, a trait named
`InPlaceInit` exists for uniform access. `Arc` did not implement
`InPlaceInit` yet, although the functions already existed. The main
reason for that, was that the trait itself returned a `Pin<Self>`. The
`Arc` implementation of the kernel is already implicitly pinned.
To enable `Arc` to implement `InPlaceInit` and to have uniform access,
for in-place and pinned in-place initialization, an associated type is
introduced for `InPlaceInit`. The new implementation of `InPlaceInit`
for `Arc` sets `Arc` as the associated type. Older implementations use
an explicit `Pin<T>` as the associated type. The implemented methods for
`Arc` are mostly moved from a direct implementation on `Arc`. There
should be no user impact. The implementation for `ListArc` is omitted,
because it is not merged yet.
Link: https://github.com/Rust-for-Linux/linux/issues/1079
Signed-off-by: Alex Mantel <alexmantel93@mailbox.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240727042442.682109-1-alexmantel93@mailbox.org
[ Removed "Rusts" (Benno). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked
in upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
-----BEGIN PGP SIGNATURE-----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=2uNw
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
Alice reported [1] that an arm64 build failed with:
ld.lld: error: undefined symbol: __extendsfdf2
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
ld.lld: error: undefined symbol: __truncdfsf2
>>> referenced by core.a6f5fc5794e7b7b3-cgu.0
>>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a
Rust 1.80.0 or later together with `CONFIG_CC_OPTIMIZE_FOR_SIZE=y`
is what triggers it.
In addition, x86_64 builds also fail the same way.
Similarly, compiling with Rust 1.82.0 (currently in nightly) makes
another one appear, possibly due to the LLVM 19 upgrade there:
ld.lld: error: undefined symbol: __eqdf2
>>> referenced by core.20495ea57a9f069d-cgu.0
>>> rust/core.o:(<f64>::next_up) in archive vmlinux.a
>>> referenced by core.20495ea57a9f069d-cgu.0
>>> rust/core.o:(<f64>::next_down) in archive vmlinux.a
Gary adds [1]:
> Usually the fix on rustc side is to mark those functions as `#[inline]`
>
> All of {midpoint,next_up,next_down} are indeed unstable functions not
> marked as inline...
Fix all those by adding those intrinsics to our usual workaround.
[ Trevor quickly submitted a fix to upstream Rust [2] that has already
been merged, to be released in Rust 1.82.0 (2024-10-17). - Miguel ]
Cc: Gary Guo <gary@garyguo.net>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/455637364 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://github.com/rust-lang/rust/pull/128749 [2]
Link: https://lore.kernel.org/r/20240806150619.192882-1-ojeda@kernel.org
[ Shortened Zulip link. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
GCC 14 recently added -fmin-function-alignment option and the
root Makefile uses it to replace -falign-functions when available.
However, this flag can cause issues when passed to the Rust
Makefile and affect the bindgen process. Bindgen relies on
libclang to parse C code, and currently does not support the
-fmin-function-alignment flag, leading to compilation failures
when GCC 14 is used.
This patch addresses the issue by adding -fmin-function-alignment
to the bindgen_skip_c_flags in rust/Makefile. This prevents the
flag from causing compilation issues.
[ Matthew and Gary confirm function alignment should not change
the ABI in a way that bindgen would care about, thus we did
not need the extra logic for bindgen from v2. - Miguel ]
Link: https://lore.kernel.org/linux-kbuild/20240222133500.16991-1-petr.pavlu@suse.com/
Signed-off-by: Zehui Xu <zehuixu@whu.edu.cn>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240731134346.10630-1-zehuixu@whu.edu.cn
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sets the `sysroot` field in rust-project.json which is now needed in
newer versions of rust-analyzer instead of the `sysroot_src` field.
Till [1] `rust-analyzer` used to guess the `sysroot` based on the
`sysroot_src` at [2]. Now `sysroot` is a required parameter for a
`rust-project.json` file. It is required because `rust-analyzer`
need it to find the proc-macro server [3].
In the current version of `rust-analyzer` the `sysroot_src` is only used
to include the inbuilt library crates (std, core, alloc, etc) [4]. Since
we already specify the core library to be included in the
`rust-project.json` we don't need to define the `sysroot_src`.
Code editors like VS Code try to use the latest version of rust-analyzer
(which is updated every week) instead of the version of rust-analyzer
that comes with the rustup toolchain (which is updated every six weeks
along with the rust version).
Without this change `rust-analyzer` is breaking for anyone using VS Code.
As they are getting the latest version of `rust-analyzer` with the
changes made in [1].
`rust-analyzer` will also start breaking for other developers as they
update their rust version (assuming that also updates the rust-analyzer
version on their system).
This patch should work with every setup as there is no more guess work
being done by `rust-analyzer`.
[ Lukas, who leads the rust-analyzer team, says:
`sysroot_src` is required now if you want to have the sysroot
source libraries be loaded. I think we used to infer it as
`{sysroot}/lib/rustlib/src/rust/library` before when only the
`sysroot` field was given but that was since changed to make it
possible in having a sysroot without the standard library sources
(that is only have the binaries available). So if you want the
library sources to be loaded by rust-analyzer you will have to set
that field as well now.
- Miguel ]
Link: https://github.com/rust-lang/rust-analyzer/pull/17287 [1]
Link: f372a8a117/crates/project-model/src/workspace.rs (L367-L374) [2]
Link: eeb192b79a/crates/project-model/src/sysroot.rs (L180-L192) [3]
Link: https://github.com/search?q=repo%3AVeykril%2Frust-analyzer%20src_root()&type=code [4]
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Sarthak Singh <sarthak.singh99@gmail.com>
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/How.20to.20rust-analyzer.20correctly.20working
Link: https://lore.kernel.org/r/20240724172713.899399-1-sarthak.singh99@gmail.com
[ Formatted comment, fixed typo and removed spurious empty line. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
remove an extra quote from the doc comment so that rustdoc
no longer genertes a link to a nonexistent file.
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: de6582833d ("rust: add firmware abstractions")
Link: https://lore.kernel.org/r/20240709004426.44854-1-andrewjballance@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers 3 stable Rust
releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow), plus beta,
plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we
will need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help promoting
the collaboration between Rust and the kernel.
[1] https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to 'alloc'
having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!' macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----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=8PYF
-----END PGP SIGNATURE-----
Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
-----BEGIN PGP SIGNATURE-----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=ybqq
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmaXl0kACgkQu+CwddJF
iJrOlgf+N/G7BmgoW2CBF7mKsvCYs+pX3xeBuxPtsuq4FD386nsPFMN8gWAYLG3q
ZU1z1S+0M8LhTg6/G9jMYLHt2Y7WhYbhFTjTHmULJkuhMDTUP9CRYy4XZ+hdPtHF
30ezSdJQF9x/XxCSaaRVK1s+SMVHFg5xAOHKpfkNSamcMz9g+ZkYyPBr10/VoKd0
JqwhW7r6hrlvWAiqY3QKCOvohIWglgvBUnNjUGMh1cUkOE2aYLYHklhRwICKgA6z
p/2BUXiAEWUtgBkUrizwm/pdhJXLs0pOeYarVZP1v83tQMxyrc6XLNnqhvxP3DPW
31thF5Rf9I8WaWTczXhxsAwFjqO3KQ==
=4uf9
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
