Formalize "gpc" as the acronym and use it in function names.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case where a GPC is refreshed to a different location within the
same page, we didn't bother to update it. Mostly we don't need to, but
since the ->khva field also includes the offset within the page, that
does have to be updated.
Fixes: 3ba2c95ea1 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since gfn_to_memslot() is relatively expensive, it helps to
skip it if it the memslot cannot possibly have dirty logging
enabled. In order to do this, add to struct kvm a counter
of the number of log-page memslots. While the correct value
can only be read with slots_lock taken, the NX recovery thread
is content with using an approximate value. Therefore, the
counter is an atomic_t.
Based on https://lore.kernel.org/kvm/20221027200316.2221027-2-dmatlack@google.com/
by David Matlack.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL on every halt,
rather than just sampling the module parameter when the VM is first
created. This restore the original behavior of kvm.halt_poll_ns for VMs
that have not opted into KVM_CAP_HALT_POLL.
Notably, this change restores the ability for admins to disable or
change the maximum halt-polling time system wide for VMs not using
KVM_CAP_HALT_POLL.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: acd05785e4 ("kvm: add capability for halt polling")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid re-reading kvm->max_halt_poll_ns multiple times during
halt-polling except when it is explicitly useful, e.g. to check if the
max time changed across a halt. kvm->max_halt_poll_ns can be changed at
any time by userspace via KVM_CAP_HALT_POLL.
This bug is unlikely to cause any serious side-effects. In the worst
case one halt polls for shorter or longer than it should, and then is
fixed up on the next halt. Furthmore, this is still possible since
kvm->max_halt_poll_ns are not synchronized with halts.
Fixes: acd05785e4 ("kvm: add capability for halt polling")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cap vcpu->halt_poll_ns based on the max halt polling time just before
halting, rather than after the last halt. This arguably provides better
accuracy if an admin disables halt polling in between halts, although
the improvement is nominal.
A side-effect of this change is that grow_halt_poll_ns() no longer needs
to access vcpu->kvm->max_halt_poll_ns, which will be useful in a future
commit where the max halt polling time can come from the module parameter
halt_poll_ns instead.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In mark_page_dirty_in_slot(), we bail out when no running vcpu exists
and a running vcpu context is strictly required by architecture. It may
cause backwards compatible issue. Currently, saving vgic/its tables is
the only known case where no running vcpu context is expected. We may
have other unknown cases where no running vcpu context exists and it's
reported by the warning message and we bail out without pushing the
dirty information to the backup bitmap. For this, the application is
going to enable the backup bitmap for the unknown cases. However, the
dirty information can't be pushed to the backup bitmap even though the
backup bitmap is enabled for those unknown cases in the application,
until the unknown cases are added to the allowed list of non-running
vcpu context with extra code changes to the host kernel.
In order to make the new application, where the backup bitmap has been
enabled, to work with the unchanged host, we continue to push the dirty
information to the backup bitmap instead of bailing out early. With the
added check on 'memslot->dirty_bitmap' to mark_page_dirty_in_slot(), the
kernel crash is avoided silently by the combined conditions: no running
vcpu context, kvm_arch_allow_write_without_running_vcpu() returns 'true',
and the backup bitmap (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) isn't enabled
yet.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221112094322.21911-1-gshan@redhat.com
ARM64 needs to dirty memory outside of a VCPU context when VGIC/ITS is
enabled. It's conflicting with that ring-based dirty page tracking always
requires a running VCPU context.
Introduce a new flavor of dirty ring that requires the use of both VCPU
dirty rings and a dirty bitmap. The expectation is that for non-VCPU
sources of dirty memory (such as the VGIC/ITS on arm64), KVM writes to
the dirty bitmap. Userspace should scan the dirty bitmap before migrating
the VM to the target.
Use an additional capability to advertise this behavior. The newly added
capability (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) can't be enabled before
KVM_CAP_DIRTY_LOG_RING_ACQ_REL on ARM64. In this way, the newly added
capability is treated as an extension of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-4-gshan@redhat.com
The VCPU isn't expected to be runnable when the dirty ring becomes soft
full, until the dirty pages are harvested and the dirty ring is reset
from userspace. So there is a check in each guest's entrace to see if
the dirty ring is soft full or not. The VCPU is stopped from running if
its dirty ring has been soft full. The similar check will be needed when
the feature is going to be supported on ARM64. As Marc Zyngier suggested,
a new event will avoid pointless overhead to check the size of the dirty
ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance.
Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring
becomes soft full in kvm_dirty_ring_push(). The event is only cleared in
the check, done in the newly added helper kvm_dirty_ring_check_request().
Since the VCPU is not runnable when the dirty ring becomes soft full, the
KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from
running until the dirty pages are harvested and the dirty ring is reset by
userspace.
kvm_dirty_ring_soft_full() becomes a private function with the newly added
helper kvm_dirty_ring_check_request(). The alignment for the various event
definitions in kvm_host.h is changed to tab character by the way. In order
to avoid using 'container_of()', the argument @ring is replaced by @vcpu
in kvm_dirty_ring_push().
Link: https://lore.kernel.org/kvmarm/87lerkwtm5.wl-maz@kernel.org
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-2-gshan@redhat.com
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source
directory (i.e. not from arch/*/include) for the sole purpose of retrieving
irqchip_in_kernel.
Making the function inline in a header that is already included,
such as asm/kvm_host.h, is not possible because it needs to look at
struct kvm which is defined after asm/kvm_host.h is included. So add a
kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is
only performance critical on arm64 and x86, and the non-inline function
is enough on all other architectures.
irq.h can then be deleted from all architectures except x86.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new "interruptible" flag showing that the caller is willing to be
interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it
up with a FOLL_INTERRUPTIBLE flag that we've just introduced.
This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the
SIGIPI) even during e.g. handling an userfaultfd page fault.
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195809.557016-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new pfn error to show that we've got a pending signal to handle
during hva_to_pfn_slow() procedure (of -EINTR retval).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195809.557016-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.
Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.
Fixes: 17601bfed9 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com
Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive.
Not checking the active flag during refresh is particularly egregious, as
KVM can end up with a valid, inactive cache, which can lead to a variety
of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing
an mmu_notifier invalidation due to the cache not being on the list of
gfns to invalidate.
Note, "active" needs to be set if and only if the cache is on the list
of caches, i.e. is reachable via mmu_notifier events. If a relevant
mmu_notifier event occurs while the cache is "active" but not on the
list, KVM will not acquire the cache's lock and so will not serailize
the mmu_notifier event with active users and/or kvm_gpc_refresh().
A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND
can be exploited to trigger the bug.
1. Deactivate shinfo cache:
kvm_xen_hvm_set_attr
case KVM_XEN_ATTR_TYPE_SHARED_INFO
kvm_gpc_deactivate
kvm_gpc_unmap
gpc->valid = false
gpc->khva = NULL
gpc->active = false
Result: active = false, valid = false
2. Cause cache refresh:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
kvm_gpc_check
return -EWOULDBLOCK because !gpc->valid
kvm_xen_set_evtchn_fast
return -EWOULDBLOCK
kvm_gpc_refresh
hva_to_pfn_retry
gpc->valid = true
gpc->khva = not NULL
Result: active = false, valid = true
3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl
KVM_XEN_ATTR_TYPE_SHARED_INFO:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
read_lock gpc->lock
kvm_xen_hvm_set_attr case
KVM_XEN_ATTR_TYPE_SHARED_INFO
mutex_lock kvm->lock
kvm_xen_shared_info_init
kvm_gpc_activate
gpc->khva = NULL
kvm_gpc_check
[ Check passes because gpc->valid is
still true, even though gpc->khva
is already NULL. ]
shinfo = gpc->khva
pending_bits = shinfo->evtchn_pending
CRASH: test_and_set_bit(..., pending_bits)
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Reported-by: : Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the gfn_to_pfn_cache lock initialization to another helper and
call the new helper during VM/vCPU creation. There are race
conditions possible due to kvm_gfn_to_pfn_cache_init()'s
ability to re-initialize the cache's locks.
For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and
kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock.
(thread 1) | (thread 2)
|
kvm_xen_set_evtchn_fast |
read_lock_irqsave(&gpc->lock, ...) |
| kvm_gfn_to_pfn_cache_init
| rwlock_init(&gpc->lock)
read_unlock_irqrestore(&gpc->lock, ...) |
Rename "cache_init" and "cache_destroy" to activate+deactivate to
avoid implying that the cache really is destroyed/freed.
Note, there more races in the newly named kvm_gpc_activate() that will
be addressed separately.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: call out that this is a bug fix]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although simple_attr_open() fails only with -ENOMEM with current code
base, it would be nicer to return retval of simple_attr_open() directly
in kvm_debugfs_open().
No functional change intended.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <69d64d93accd1f33691b8a383ae555baee80f943.1665975828.git.houwenlong.hwl@antgroup.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines.
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available. (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported.
(Abhishek Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent. (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring. (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver.
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver. (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same.
(Jason Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to
exist with NULL iommu_group pointer to support existing userspace
use cases of holding the group file open. (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups. (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources. (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core. (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that
fall out from previous refactoring. (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=Z8+P
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
SPAPR exists completely outside the normal iommu driver framework, the
groups it creates are fake and are only created to enable VFIO's uAPI.
Thus, it does not need to follow the iommu core rule that the iommu_group
will only be touched while a driver is attached.
Carry a group reference into KVM and have KVM directly manage the lifetime
of this object independently of VFIO. This means KVM no longer relies on
the vfio group file being valid to maintain the group reference.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This replaces uses of vfio_file_iommu_group() which were only detecting if
the file is a VFIO file with no interest in the actual group.
The only remaning user of vfio_file_iommu_group() is in KVM for the SPAPR
stuff. It passes the iommu_group into the arch code through kvm for some
reason.
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-15417f29324e+1c-vfio_group_disassociate_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
-----BEGIN PGP SIGNATURE-----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=aNPK
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v6.1
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
In order to differenciate between architectures that require no extra
synchronisation when accessing the dirty ring and those who do,
add a new capability (KVM_CAP_DIRTY_LOG_RING_ACQ_REL) that identify
the latter sort. TSO architectures can obviously advertise both, while
relaxed architectures must only advertise the ACQ_REL version.
This requires some configuration symbol rejigging, with HAVE_KVM_DIRTY_RING
being only indirectly selected by two top-level config symbols:
- HAVE_KVM_DIRTY_RING_TSO for strongly ordered architectures (x86)
- HAVE_KVM_DIRTY_RING_ACQ_REL for weakly ordered architectures (arm64)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-3-maz@kernel.org
The current implementation of the dirty ring has an implicit requirement
that stores to the dirty ring from userspace must be:
- be ordered with one another
- visible from another CPU executing a ring reset
While these implicit requirements work well for x86 (and any other
TSO-like architecture), they do not work for more relaxed architectures
such as arm64 where stores to different addresses can be freely
reordered, and loads from these addresses not observing writes from
another CPU unless the required barriers (or acquire/release semantics)
are used.
In order to start fixing this, upgrade the ring reset accesses:
- the kvm_dirty_gfn_harvested() helper now uses acquire semantics
so it is ordered after all previous writes, including that from
userspace
- the kvm_dirty_gfn_set_invalid() helper now uses release semantics
so that the next_slot and next_offset reads don't drift past
the entry invalidation
This is only a partial fix as the userspace side also need upgrading.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20220926145120.27974-2-maz@kernel.org
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return
value of kvm_vcpu_block/kvm_vcpu_halt. Remove it.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20220921003201.1441511-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When alloc_cpumask_var_node() fails for a certain cpu, there might be some
allocated cpumasks for percpu cpu_kick_mask. We should free these cpumasks
or memoryleak will occur.
Fixes: baff59ccdc ("KVM: Pre-allocate cpumasks for kvm_make_all_cpus_request_except()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220823063414.59778-1-linmiaohe@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819021535.483702-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819022804.483914-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating
and initializing coalesced MMIO objects is separate from registering any
associated devices. Moving coalesced MMIO cleans up the last oddity
where KVM does VM creation/initialization after kvm_create_vm(), and more
importantly after kvm_arch_post_init_vm() is called and the VM is added
to the global vm_list, i.e. after the VM is fully created as far as KVM
is concerned.
Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but
the original implementation was completely devoid of error handling.
Commit 6ce5a090a9 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s
error handling" fixed the various bugs, and in doing so rightly moved the
call to after kvm_create_vm() because kvm_coalesced_mmio_init() also
registered the coalesced MMIO device. Commit 2b3c246a68 ("KVM: Make
coalesced mmio use a device per zone") cleaned up that mess by having
each zone register a separate device, i.e. moved device registration to
its logical home in kvm_vm_ioctl_register_coalesced_mmio(). As a result,
kvm_coalesced_mmio_init() is now a "pure" initialization helper and can
be safely called from kvm_create_vm().
Opportunstically drop the #ifdef, KVM provides stubs for
kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded. The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list. Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.
The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9cdf ("module: remove rmmod
--wait option.") nearly a decade ago.
It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security. Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.
Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope. Forcefully unloading any module taints kernel (for obvious
reasons) _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users". In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.
Fixes: 5f6de5cbeb ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Properly unwind VM creation if kvm_create_vm_debugfs() fails. A recent
change to invoke kvm_create_vm_debug() in kvm_create_vm() was led astray
by buggy try_get_module() handling adding by commit 5f6de5cbeb ("KVM:
Prevent module exit until all VMs are freed"). The debugfs error path
effectively inherits the bad error path of try_module_get(), e.g. KVM
leaves the to-be-free VM on vm_list even though KVM appears to do the
right thing by calling module_put() and falling through.
Opportunistically hoist kvm_create_vm_debugfs() above the call to
kvm_arch_post_init_vm() so that the "post-init" arch hook is actually
invoked after the VM is initialized (ignoring kvm_coalesced_mmio_init()
for the moment). x86 is the only non-nop implementation of the post-init
hook, and it doesn't allocate/initialize any objects that are reachable
via debugfs code (spawns a kthread worker for the NX huge page mitigation).
Leave the buggy try_get_module() alone for now, it will be fixed in a
separate commit.
Fixes: b74ed7a68e ("KVM: Actually create debugfs in kvm_create_vm()")
Reported-by: syzbot+744e173caec2e1627ee0@syzkaller.appspotmail.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220816053937.2477106-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Doing debugfs creation after vm creation leaves things in a
quasi-initialized state for a while. This is further complicated by the
fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and
stats init/destroy with the vm init/destroy pattern to avoid any
headaches.
Note the fix for a benign mistake in error handling for calls to
kvm_arch_create_vm_debugfs() rolled in. Since all implementations of
the function return 0 unconditionally it isn't actually a bug at
the moment.
Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs()
error path. Previously it was safe to assume that kvm_destroy_vm() would
take out the garbage, that is no longer the case.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has
been allocated but not yet installed. It is only really useful as an
identifier in strings for the VM (such as debugfs).
Treat it exactly as such by passing the string name of the fd to
kvm_create_vm_debugfs(), futureproofing against possible misuse of the
VM fd.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-5-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so
that KVM can use the fd value to generate strigns, e.g. for debugfs,
when creating and initializing the VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize stats_id alongside other kvm_vcpu fields to make it more
difficult to unintentionally access stats_id before it's set.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize stats_id alongside other struct kvm fields to make it more
difficult to unintentionally access stats_id before it's set. While at
it, move the format string to the first line of the call and fix the
indentation of the second line.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
The kvm_mmu_topup_memory_cache() always uses GFP_KERNEL_ACCOUNT for
memory allocation which prevents it's use in atomic context. To address
this limitation of kvm_mmu_topup_memory_cache(), we add gfp_custom flag
in struct kvm_mmu_memory_cache. When the gfp_custom flag is set to some
GFP_xyz flags, the kvm_mmu_topup_memory_cache() will use that instead of
GFP_KERNEL_ACCOUNT.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the unnecessary initialization of the local 'pfn' variable in
hva_to_pfn(). First and foremost, '0' is not an invalid pfn, it's a
perfectly valid pfn on most architectures. I.e. if hva_to_pfn() were to
return an "uninitializd" pfn, it would actually be interpeted as a legal
pfn by most callers.
Second, hva_to_pfn() can't return an uninitialized pfn as hva_to_pfn()
explicitly sets pfn to an error value (or returns an error value directly)
if a helper returns failure, and all helpers set the pfn on success.
The zeroing of 'pfn' was introduced by commit 2fc843117d ("KVM:
reorganize hva_to_pfn"), probably to avoid "uninitialized variable"
warnings on statements that return pfn. However, no compiler seems
to produce them, making the initialization unnecessary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename and refactor kvm_is_reserved_pfn() to kvm_pfn_to_refcounted_page()
to better reflect what KVM is actually checking, and to eliminate extra
pfn_to_page() lookups. The kvm_release_pfn_*() an kvm_try_get_pfn()
helpers in particular benefit from "refouncted" nomenclature, as it's not
all that obvious why KVM needs to get/put refcounts for some PG_reserved
pages (ZERO_PAGE and ZONE_DEVICE).
Add a comment to call out that the list of exceptions to PG_reserved is
all but guaranteed to be incomplete. The list has mostly been compiled
by people throwing noodles at KVM and finding out they stick a little too
well, e.g. the ZERO_PAGE's refcount overflowed and ZONE_DEVICE pages
didn't get freed.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Operate on a 'struct page' instead of a pfn when checking if a page is a
ZONE_DEVICE page, and rename the helper accordingly. Generally speaking,
KVM doesn't actually care about ZONE_DEVICE memory, i.e. shouldn't do
anything special for ZONE_DEVICE memory. Rather, KVM wants to treat
ZONE_DEVICE memory like regular memory, and the need to identify
ZONE_DEVICE memory only arises as an exception to PG_reserved pages. In
other words, KVM should only ever check for ZONE_DEVICE memory after KVM
has already verified that there is a struct page associated with the pfn.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop helpers to convert a gfn/gpa to a 'struct page' in the context of a
vCPU. KVM doesn't require that guests be backed by 'struct page' memory,
thus any use of helpers that assume 'struct page' is bound to be flawed,
as was the case for the recently removed last user in x86's nested VMX.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop a WARN_ON() if kvm_pfn_to_page() encounters a "reserved" pfn, which
in this context means a struct page that has PG_reserved but is not a/the
ZERO_PAGE and is not a ZONE_DEVICE page. The usage, via gfn_to_page(),
in x86 is safe as gfn_to_page() is used only to retrieve a page from
KVM-controlled memslot, but the usage in PPC and s390 operates on
arbitrary gfns and thus memslots that can be backed by incompatible
memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invert the order of KVM's page/pfn release helpers so that the "inner"
helper operates on a page instead of a pfn. As pointed out by Linus[*],
converting between struct page and a pfn isn't necessarily cheap, and
that's not even counting the overhead of is_error_noslot_pfn() and
kvm_is_reserved_pfn(). Even if the checks were dirt cheap, there's no
reason to convert from a page to a pfn and back to a page, just to mark
the page dirty/accessed or to put a reference to the page.
Opportunistically drop a stale declaration of kvm_set_page_accessed()
from kvm_host.h (there was no implementation).
No functional change intended.
[*] https://lore.kernel.org/all/CAHk-=wifQimj2d6npq-wCi5onYPjzQg4vyO4tFcPJJZr268cRw@mail.gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE. The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed. The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.
Fixes: 7df003c852 ("KVM: fix overflow of zero page refcount with ksm running")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a check from kvm_release_pfn() to bail if the provided @pfn is
zero. Zero is a perfectly valid pfn on most architectures, and should
not be used to indicate an error or an invalid pfn. The bogus check was
added by commit 917248144d ("x86/kvm: Cache gfn to pfn translation"),
which also did the bad thing of zeroing the pfn and gfn to mark a cache
invalid. Thankfully, that bad behavior was axed by commit 357a18ad23
("KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it use the same verb as in kvm_kick_many_cpus().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220605063417.308311-5-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to show tests
x86:
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Rewrite gfn-pfn cache refresh
* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit
On SVM, if preemption happens right after the call to finish_rcuwait
but before call to kvm_arch_vcpu_unblocking on SVM/AVIC, it itself
will re-enable AVIC, and then we will try to re-enable it again
in kvm_arch_vcpu_unblocking which will lead to a warning
in __avic_vcpu_load.
The same problem can happen if the vCPU is preempted right after the call
to kvm_arch_vcpu_blocking but before the call to prepare_to_rcuwait
and in this case, we will end up with AVIC enabled during sleep -
Ooops.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606180829.102503-7-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_vcpu_precreate() targets to handle arch specific VM resource
to be prepared prior to the actual creation of vCPU. For example, x86
platform may need do per-VM allocation based on max_vcpu_ids at the
first vCPU creation. It probably leads to concurrency control on this
allocation as multiple vCPU creation could happen simultaneously. From
the architectual point of view, it's necessary to execute
kvm_arch_vcpu_precreate() under protect of kvm->lock.
Currently only arm64, x86 and s390 have non-nop implementations at the
stage of vCPU pre-creation. Remove the lock acquiring in s390's design
and make sure all architecture can run kvm_arch_vcpu_precreate() safely
under kvm->lock without recrusive lock issue.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220419154409.11842-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Improvements to mlx5 vfio-pci variant driver, including support
for parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API
to use vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA
ownership (Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and
kvm association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
-----BEGIN PGP SIGNATURE-----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=etEI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
Put the reference to any struct page mapped/tracked by a gfn=>pfn cache
upon inserting the pfn into its associated cache, as opposed to putting
the reference only when the cache is done using the pfn. In other words,
don't pin pages while they're in the cache. One of the major roles of
the gfn=>pfn cache is to play nicely with invalidation events, i.e. it
exists in large part so that KVM doesn't rely on pinning pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the gfn=>pfn cache (gpc) refresh logic to address multiple races
between the cache itself, and between the cache and mmu_notifier events.
The existing refresh code attempts to guard against races with the
mmu_notifier by speculatively marking the cache valid, and then marking
it invalid if a mmu_notifier invalidation occurs. That handles the case
where an invalidation occurs between dropping and re-acquiring gpc->lock,
but it doesn't handle the scenario where the cache is refreshed after the
cache was invalidated by the notifier, but before the notifier elevates
mmu_notifier_count. The gpc refresh can't use the "retry" helper as its
invalidation occurs _before_ mmu_notifier_count is elevated and before
mmu_notifier_range_start is set/updated.
CPU0 CPU1
---- ----
gfn_to_pfn_cache_invalidate_start()
|
-> gpc->valid = false;
kvm_gfn_to_pfn_cache_refresh()
|
|-> gpc->valid = true;
hva_to_pfn_retry()
|
-> acquire kvm->mmu_lock
kvm->mmu_notifier_count == 0
mmu_seq == kvm->mmu_notifier_seq
drop kvm->mmu_lock
return pfn 'X'
acquire kvm->mmu_lock
kvm_inc_notifier_count()
drop kvm->mmu_lock()
kernel frees pfn 'X'
kvm_gfn_to_pfn_cache_check()
|
|-> gpc->valid == true
caller accesses freed pfn 'X'
Key off of mn_active_invalidate_count to detect that a pfncache refresh
needs to wait for an in-progress mmu_notifier invalidation. While
mn_active_invalidate_count is not guaranteed to be stable, it is
guaranteed to be elevated prior to an invalidation acquiring gpc->lock,
so either the refresh will see an active invalidation and wait, or the
invalidation will run after the refresh completes.
Speculatively marking the cache valid is itself flawed, as a concurrent
kvm_gfn_to_pfn_cache_check() would see a valid cache with stale pfn/khva
values. The KVM Xen use case explicitly allows/wants multiple users;
even though the caches are allocated per vCPU, __kvm_xen_has_interrupt()
can read a different vCPU (or vCPUs). Address this race by invalidating
the cache prior to dropping gpc->lock (this is made possible by fixing
the above mmu_notifier race).
Complicating all of this is the fact that both the hva=>pfn resolution
and mapping of the kernel address can sleep, i.e. must be done outside
of gpc->lock.
Fix the above races in one fell swoop, trying to fix each individual race
is largely pointless and essentially impossible to test, e.g. closing one
hole just shifts the focus to the other hole.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Protect gfn=>pfn cache refresh with a mutex to fully serialize refreshes.
The refresh logic doesn't protect against
- concurrent unmaps, or refreshes with different GPAs (which may or may not
happen in practice, for example if a cache is only used under vcpu->mutex;
but it's allowed in the code)
- a false negative on the memslot generation. If the first refresh sees
a stale memslot generation, it will refresh the hva and generation before
moving on to the hva=>pfn translation. If it then drops gpc->lock, a
different user of the cache can come along, acquire gpc->lock, see that
the memslot generation is fresh, and skip the hva=>pfn update due to the
userspace address also matching (because it too was updated).
The refresh path can already sleep during hva=>pfn resolution, so wrap
the refresh with a mutex to ensure that any given refresh runs to
completion before other callers can start their refresh.
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't adjust the userspace address in the gfn=>pfn cache by the page
offset from the gpa. KVM should never use the user address directly, and
all KVM operations that translate a user address to something else
require the user address to be page aligned. Ignoring the offset will
allow the cache to reuse a gfn=>hva translation in the unlikely event
that the page offset of the gpa changes, but the gfn does not. And more
importantly, not having to (un)adjust the user address will simplify a
future bug fix.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put the struct page reference to pfn acquired by hva_to_pfn() when the
old and new pfns for a gfn=>pfn cache match. The cache already has a
reference via the old/current pfn, and will only put one reference when
the cache is done with the pfn.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @pga param from __release_gpc() and rename the helper to make it
more obvious that the cache itself is not being released. The helper
will be reused by a future commit to release a pfn+khva combination that
is _never_ associated with the cache, at which point the current name
would go from slightly misleading to blatantly wrong.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429210025.3293691-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=mh7W
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.19
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed
to the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
[Due to the conflict, KVM_SYSTEM_EVENT_SEV_TERM is relocated
from 4 to 6. - Paolo]
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails. The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept. If
there is no old memslot, then obviously the bitmap can't have been
inherited
The bug was exposed by commit 86931ff720 ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.
The backtrace from kmemleak:
__vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
__vmalloc_node mm/vmalloc.c:3232 [inline]
__vmalloc+0x49/0x50 mm/vmalloc.c:3246
__vmalloc_array mm/util.c:671 [inline]
__vcalloc+0x49/0x70 mm/util.c:694
kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
__kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
kvm_set_memory_region virt/kvm/kvm_main.c:1962
kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
vfs_ioctl fs/ioctl.c:51
__do_sys_ioctl fs/ioctl.c:870
__se_sys_ioctl fs/ioctl.c:856
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
And the relevant sequence of KVM events:
ioctl(3, KVM_CREATE_VM, 0) = 4
ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
flags=KVM_MEM_LOG_DIRTY_PAGES,
guest_phys_addr=0x10000000000000,
memory_size=4096,
userspace_addr=0x20fe8000}
) = -1 EINVAL (Invalid argument)
Fixes: 244893fa28 ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220518003842.1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix following coccicheck warning:
./virt/kvm/vfio.c:258:1-7: preceding lock on line 236
If kvm_vfio_file_iommu_group() failed, code would goto err_fdput with
mutex_lock acquired and then return ret. It might cause potential
deadlock. Move mutex_unlock bellow err_fdput tag to fix it.
Fixes: d55d9e7a45 ("kvm/vfio: Store the struct file in the kvm_vfio_group")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220517023441.4258-1-wanjiabing@vivo.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
None of the VFIO APIs take in the vfio_group anymore, so we can remove it
completely.
This has a subtle side effect on the enforced coherency tracking. The
vfio_group_get_external_user() was holding on to the container_users which
would prevent the iommu_domain and thus the enforced coherency value from
changing while the group is registered with kvm.
It changes the security proof slightly into 'user must hold a group FD
that has a device that cannot enforce DMA coherence'. As opening the group
FD, not attaching the container, is the privileged operation this doesn't
change the security properties much.
On the flip side it paves the way to changing the iommu_domain/container
attached to a group at runtime which is something that will be required to
support nested translation.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>i
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Just change the argument from struct vfio_group to struct file *.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of a general extension check change the function into a limited
test if the iommu_domain has enforced coherency, which is the only thing
kvm needs to query.
Make the new op self contained by properly refcounting the container
before touching it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_group_fops_open() ensures there is only ever one struct file open for
any struct vfio_group at any time:
/* Do we need multiple instances of the group open? Seems not. */
opened = atomic_cmpxchg(&group->opened, 0, 1);
if (opened) {
vfio_group_put(group);
return -EBUSY;
Therefor the struct file * can be used directly to search the list of VFIO
groups that KVM keeps instead of using the
vfio_external_group_match_file() callback to try to figure out if the
passed in FD matches the list or not.
Delete vfio_external_group_match_file().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The only caller wants to get a pointer to the struct iommu_group
associated with the VFIO group file. Instead of returning the group ID
then searching sysfs for that string to get the struct iommu_group just
directly return the iommu_group pointer already held by the vfio_group
struct.
It already has a safe lifetime due to the struct file kref, the vfio_group
and thus the iommu_group cannot be destroyed while the group file is open.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Following patches will change the APIs to use the struct file as the handle
instead of the vfio_group, so hang on to a reference to it with the same
duration of as the vfio_group.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To make it easier to read and change in following patches.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For TDX guests, the maximum number of vcpus needs to be specified when the
TDX guest VM is initialized (creating the TDX data corresponding to TDX
guest) before creating vcpu. It needs to record the maximum number of
vcpus on VM creation (KVM_CREATE_VM) and return error if the number of
vcpus exceeds it
Because there is already max_vcpu member in arm64 struct kvm_arch, move it
to common struct kvm and initialize it to KVM_MAX_VCPUS before
kvm_arch_init_vm() instead of adding it to x86 struct kvm_arch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <e53234cdee6a92357d06c80c03d77c19cdefb804.1646422845.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees:
* Fix potential races when walking host page table
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
* Fix shadow page table leak when KVM runs nested
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SPDX comments use use /* */ style comments in headers anad
// style comments in .c files. Also fix two spelling mistakes.
Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220410153840.55506-1-trix@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM
is created. KVM's teardown when VM creation fails is kludgy and calls
kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never
attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero
initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__dentry_path+0x7b/0x130
Call Trace:
<TASK>
dentry_path_raw+0x42/0x70
kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm]
kvm_put_kvm+0x63/0x2b0 [kvm]
kvm_dev_ioctl+0x43a/0x920 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Modules linked in: kvm_intel kvm irqbypass
Fixes: a44a4cc1c9 ("KVM: Don't create VM debugfs files outside of the VM directory")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220415004622.2207751-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmJQTkEPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDUHoP/3z2X49N4zbXyEW1OAbZEFtmm/Mi8gcaqhxN
M2lnzCTfBLuQMvWMcJGzlbPnXqhH1ouRWD4IiWpvIjoHznUccivysLQJcNl9ZCEN
JH82V0UCLCU58Syw706xBpOn8Ay3bOsUbzt/QSGttxKOJ+8LuSOt0obV8wr64ppg
m408+CvqgztK637hnTPNYQE1z6qABgZK2tUWDK5+TjazTX0B+bi60xRiDNNaOS/o
13wiNStrPzCGE6FwfGMefXqQ7fhLT8WAeYz/+9x7yUbniENZTmeI8iOiapQoMZaW
vlJudKPdbK1AIvhcm51bODB8DuHpJXswhzXVutSU3DdY7o7smqFH/9q82xgby4Oe
pFy2jwLwJ0P66Oo0M9IexPPxFUzls1ZGFLMfbIZeSflDHa0oGvvnFAH5Me+YIvbG
kyzh+wEytvr77baBBvcU+xRiKd1OsUE8AnGemwHSR8kV10kfmwt80iXgNLocStsa
mctnZY4vujtjh79avzdK2VzQ+e111+Ge1Q/I3RSpkCVg0M5yyZfygyv0LNPhN7oB
vZCJU/sZt5yZiI86pt7U0g71q95VeuC5ncG7fosC2nv7fWuDz1JRBjuiCqjccvIo
28AWEDin/y3+wKsJH4MfhFGFNmOUDZhUg2y0nzJiiKGCIyvWTK49fVwtwYpI/Jeh
nNBuAYH4
=0xZo
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.18, take #1
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
Unfortunately, there is no guarantee that KVM was able to instantiate a
debugfs directory for a particular VM. To that end, KVM shouldn't even
attempt to create new debugfs files in this case. If the specified
parent dentry is NULL, debugfs_create_file() will instantiate files at
the root of debugfs.
For arm64, it is possible to create the vgic-state file outside of a
VM directory, the file is not cleaned up when a VM is destroyed.
Nonetheless, the corresponding struct kvm is freed when the VM is
destroyed.
Nip the problem in the bud for all possible errant debugfs file
creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing,
debugfs_create_file() will fail instead of creating the file in the root
directory.
Cc: stable@kernel.org
Fixes: 929f45e324 ("kvm: no need to check return value of debugfs_create functions")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL. Afterwards, it calls
kvm_arch_vcpu_destroy().
However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():
mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171
kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline]
kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618
vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211
vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985
kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
The fix is to release the dirty page ring after kvm_arch_vcpu_destroy
has run.
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code
with a unified enum/bitmask. Using explicit names makes it easier to
review and audit call sites.
Opportunistically add a WARN to prevent passing garbage; instantating a
cache without declaring its usage is either buggy or pointless.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't actually set a request bit in vcpu->requests when making a request
purely to force a vCPU to exit the guest. Logging a request but not
actually consuming it would cause the vCPU to get stuck in an infinite
loop during KVM_RUN because KVM would see the pending request and bail
from VM-Enter to service the request.
Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as
nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all
too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init()
without implementing handling of the request, especially since getting
test coverage of MMU notifier interaction with specific KVM features
usually requires a directed test.
Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus
to evict_vcpus. The purpose of the request is to get vCPUs out of guest
mode, it's supposed to _avoid_ waking vCPUs that are blocking.
Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to
what it wants to accomplish, and to genericize the name so that it can
used for similar but unrelated scenarios, should they arise in the future.
Add a comment and documentation to explain why the "no action" request
exists.
Add compile-time assertions to help detect improper usage. Use the inner
assertless helper in the one s390 path that makes requests without a
hardcoded request.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220223165302.3205276-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the cache's user host virtual address becomes invalid, there
is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc()
could release the pfn but the gpc->pfn field has not been overwritten
with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will
call put_page again on the same page.
Cc: stable@vger.kernel.org
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 3d3aab1b97.
Now that the KVM module's lifetime is tied to kvm.users_count, there is
no need to also tie it's lifetime to the lifetime of the VM and vCPU
file descriptors.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-3-dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes: af585b921e ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes: 3d3aab1b97 ("KVM: set owner of cpu and vm file operations")
Cc: stable@vger.kernel.org
Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocations whose size is related to the memslot size can be arbitrarily
large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy"
sizes that fit in 32 bits.
Cc: stable@vger.kernel.org
Fixes: 7661809d49 ("mm: don't allow oversized kvmalloc() calls")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the generic kvm_reload_remote_mmus() and open code its
functionality into the two x86 callers. x86 is (obviously) the only
architecture that uses the hook, and is also the only architecture that
uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That
will change in a future patch, as x86's usage when zapping a single
shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only
MMUs whose root is being zapped actually need to be reloaded.
s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose.
Drop the generic code in anticipation of implementing s390 and x86 arch
specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely.
Opportunistically reword the x86 TDP MMU comment to avoid making
references to functions (and requests!) when possible, and to remove the
rather ambiguous "this".
No functional change intended.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM worker kthreads can linger in the VM process's cgroup for sometime
after KVM terminates the VM process.
KVM terminates the worker kthreads by calling kthread_stop() which waits
on the 'exited' completion, triggered by exit_mm(), via mm_release(), in
do_exit() during the kthread's exit. However, these kthreads are
removed from the cgroup using the cgroup_exit() which happens after the
exit_mm(). Therefore, A VM process can terminate in between the
exit_mm() and cgroup_exit() calls, leaving only worker kthreads in the
cgroup.
Moving worker kthreads back to the original cgroup (kthreadd_task's
cgroup) makes sure that the cgroup is empty as soon as the main VM
process is terminated.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220222054848.563321-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used,
so remove it. No functional change intended.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220125095909.38122-19-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
