The DT bindings don't put such a constraint, nor should the kernel. It
is perfectly fine for opp-level to be set to 0, if we need to put the
performance state votes for a domain for a particular OPP.
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If dev_pm_opp_attach_genpd() is called multiple times (once for each CPU
sharing the table), then it would result in unwanted behavior like
memory leak, attaching the domain multiple times, etc.
Handle that by checking and returning earlier if the domains are already
attached. Now that dev_pm_opp_detach_genpd() can get called multiple
times as well, we need to protect that too.
Note that the virtual device pointers aren't returned in this case, as
they may become unavailable to some callers during the middle of the
operation.
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core already has well-defined semantics to ensure required
OPPs/regulators are set before/after the frequency change, depending
on if we scale up or down.
Similar requirements might exist for the order of required OPPs
when multiple power domains need to be scaled for a frequency change.
For example, on Qualcomm platforms using CPR (Core Power Reduction),
we need to scale the VDDMX and CPR power domain. When scaling up,
MX should be scaled up before CPR. When scaling down, CPR should be
scaled down before MX.
In general, if there are multiple "required-opps" in the device tree
I would expect that the order is either irrelevant, or there is some
dependency between the power domains. In that case, the power domains
should be scaled down in reverse order.
This commit updates _set_required_opps() to set required OPPs in
reverse order when scaling down.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[ Viresh: Fix rebase conflict and minor rearrangement of the code ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Move call to dev_pm_genpd_set_performance_state() to a separate
function so we can avoid duplicating the code for the single and
multiple genpd case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[ Viresh: Validate virtual device before use ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since commit c0ab9e0812 ("opp: Allocate genpd_virt_devs from
dev_pm_opp_attach_genpd()"), the allocation of the virtual devices is
moved to dev_pm_opp_attach_genpd() and this check isn't required anymore
as it will always fail. Drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull operating performance points (OPP) framework fixes for 5.9-rc4 from
Viresh Kumar:
"This fixes reference counting for OPP tables. Few patches are getting
queued (for various subsystems) for 5.10 which depend on this to be
fixed first."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't drop reference for an OPP table that was never parsed
dev_pm_opp_remove_table() should drop a reference to the OPP table only
if the DT OPP table was parsed earlier with a call to
dev_pm_opp_of_add_table() earlier. Else it may end up dropping the
reference to the OPP table, which was added as a result of other calls
like dev_pm_opp_set_clkname(). And would hence result in undesirable
behavior later on when caller would try to free the resource again.
Fixes: 03758d6026 ("opp: Replace list_kref with a local counter")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core manages various resources, e.g. clocks or interconnect paths.
These resources are looked up when the OPP table is allocated once
dev_pm_opp_get_opp_table() is called the first time (either directly
or indirectly through one of the many helper functions).
At this point, the resources may not be available yet, i.e. looking them
up will result in -EPROBE_DEFER. Unfortunately, dev_pm_opp_get_opp_table()
is currently unable to propagate this error code since it only returns
the allocated OPP table or NULL.
This means that all consumers of the OPP core are required to make sure
that all necessary resources are available. Usually this happens by
requesting them, checking the result and releasing them immediately after.
For example, we have added "dev_pm_opp_of_find_icc_paths(dev, NULL)" to
several drivers now just to make sure the interconnect providers are
ready before the OPP table is allocated. If this call is missing,
the OPP core will only warn about this and then attempt to continue
without interconnect. This will eventually fail horribly, e.g.:
cpu cpu0: _allocate_opp_table: Error finding interconnect paths: -517
... later ...
of: _read_bw: Mismatch between opp-peak-kBps and paths (1 0)
cpu cpu0: _opp_add_static_v2: opp key field not found
cpu cpu0: _of_add_opp_table_v2: Failed to add OPP, -22
This example happens when trying to use interconnects for a CPU OPP
table together with qcom-cpufreq-nvmem.c. qcom-cpufreq-nvmem calls
dev_pm_opp_set_supported_hw(), which ends up allocating the OPP table
early. To fix the problem with the current approach we would need to add
yet another call to dev_pm_opp_of_find_icc_paths(dev, NULL).
But actually qcom-cpufreq-nvmem.c has nothing to do with interconnects...
This commit attempts to make this more robust by allowing
dev_pm_opp_get_opp_table() to return an error pointer. Fixing all
the usages is trivial because the function is usually used indirectly
through another helper (e.g. dev_pm_opp_set_supported_hw() above).
These other helpers already return an error pointer.
The example above then works correctly because set_supported_hw() will
return -EPROBE_DEFER, and qcom-cpufreq-nvmem.c already propagates that
error. It should also be possible to remove the remaining usages of
"dev_pm_opp_of_find_icc_paths(dev, NULL)" from other drivers as well.
Note that this commit currently only handles -EPROBE_DEFER for the
clock/interconnects within _allocate_opp_table(). Other errors are just
ignored as before. Eventually those should be propagated as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[ Viresh: skip checking return value of dev_pm_opp_get_opp_table() for
EPROBE_DEFER in domain.c, fix NULL return value and reorder
code a bit in core.c, and update exynos-asv.c ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core needs to track if the resources of devices are
enabled/configured or not, as it disables the resources when target_freq
is set to 0.
Handle that with the new enabled flag and remove otherwise complex
conditional statements.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Expand the scope of the regulator_enabled flag and use it to track
status of all the resources. This will be used for other stuff in the
next patch.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
dev_pm_opp_set_rate() can now be called with freq = 0 in order
to either drop performance or bandwidth votes or to disable
regulators on platforms which support them.
In such cases, a subsequent call to dev_pm_opp_set_rate() with
the same frequency ends up returning early because 'old_freq == freq'
Instead make it fall through and put back the dropped performance
and bandwidth votes and/or enable back the regulators.
Cc: v5.3+ <stable@vger.kernel.org> # v5.3+
Fixes: cd7ea58286 ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes")
Reported-by: Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[ Viresh: Don't skip clk_set_rate() and massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We get the opp_table pointer at the top of the function and so we should
put the pointer at the end of the function like all other exit paths
from this function do.
Cc: v5.8+ <stable@vger.kernel.org> # v5.8+
Fixes: b00e667a6d ("opp: Remove bandwidth votes when target_freq is zero")
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[ Viresh: Split the patch into two ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We get the opp_table pointer at the top of the function and so we should
put the pointer at the end of the function like all other exit paths
from this function do.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: aca48b61f9 ("opp: Manage empty OPP tables with clk handle")
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[ Viresh: Split the patch into two ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq driver changes for v5.9-rc1 from Viresh Kumar:
"Here are the details:
- Adaptive voltage scaling (AVS) support and minor cleanups for
brcmstb driver (Florian Fainelli and Markus Mayer).
- A new tegra driver and cleanup for the existing one (Sumit Gupta and
Jon Hunter).
- Bandwidth level support for Qcom driver along with OPP changes (Sibi
Sankar).
- Cleanups to sti, cpufreq-dt, ap806, CPPC drivers (Viresh Kumar, Lee
Jones, Ivan Kokshaysky, Sven Auhagen, and Xin Hao).
- Make schedutil default governor for ARM (Valentin Schneider).
- Fix dependency issues for imx (Walter Lozano).
- Cleanup around cached_resolved_idx in cpufreq core (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: make schedutil the default for arm and arm64
cpufreq: cached_resolved_idx can not be negative
cpufreq: Add Tegra194 cpufreq driver
dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding
cpufreq: imx: Select NVMEM_IMX_OCOTP
cpufreq: sti-cpufreq: Fix some formatting and misspelling issues
cpufreq: tegra186: Simplify probe return path
cpufreq: CPPC: Reuse caps variable in few routines
cpufreq: ap806: fix cpufreq driver needs ap cpu clk
cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable
cpufreq: dt: fix oops on armada37xx
cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS
cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware
cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command()
cpufreq: qcom: Disable fast switch when scaling DDR/L3
cpufreq: qcom: Update the bandwidth levels on frequency change
OPP: Add and export helper to set bandwidth
cpufreq: blacklist SC7180 in cpufreq-dt-platdev
cpufreq: blacklist SDM845 in cpufreq-dt-platdev
Add and export 'dev_pm_opp_set_bw' to set the bandwidth
levels associated with an OPP.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Export dev_pm_opp_adjust_voltage() as it may be used by modules later
on.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[ Viresh: Rewrote commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We already drop several votes when target_freq is set to zero, drop
bandwidth votes as well.
Reported-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Tested-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add enable regulators to dev_pm_opp_set_regulators() and disable
regulators to dev_pm_opp_put_regulators(). Even if bootloader
leaves regulators enabled, they should be enabled in kernel in
order to increase the reference count.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Clément Péron <peron.clem@gmail.com>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
[ Viresh: Enable the regulator only after it is programmed and add a
flag to track its status. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reorder the code a bit to make it more readable. Add additional comment
as well.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Clément Péron <peron.clem@gmail.com>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If the OPP bandwidth values are populated, we want to switch also the
interconnect bandwidth in addition to frequency and voltage.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP bindings now support bandwidth values, so add support to parse it
from device tree and store it into the new dev_pm_opp_icc_bw struct, which
is part of the dev_pm_opp.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[ Viresh: Create _read_bw() and use it, renamed _of_find_icc_paths() to
dev_pm_opp_of_find_icc_paths(), exported it and made opp_table
argument optional. Also drop the depends on from Kconfig. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The opp-hz DT property is not mandatory and we may use another property
as a key in the OPP table. Add helper functions to simplify the reading
and comparing the keys.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
[ Viresh: Removed an unnecessary comment ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
With OPP core now supporting DVFS for IO devices, we have instances of
IO devices (same IP block) which require an OPP on some platforms/SoCs
while just needing to scale the clock on some others.
In order to avoid conditional code in every driver which supports such
devices (to check for availability of OPPs and then deciding to do
either dev_pm_opp_set_rate() or clk_set_rate()) add support to manage
empty OPP tables with a clk handle.
This makes dev_pm_opp_set_rate() equivalent of a clk_set_rate() for
devices with just a clk and no OPPs specified, and makes
dev_pm_opp_set_rate(0) bail out without throwing an error.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A kref or refcount isn't the right tool to be used here for counting
number of devices that are sharing the static OPPs created for the OPP
table. For example, we are reinitializing the kref again, after it
reaches a value of 0 and frees the resources, if the static OPPs get
added for the same OPP table structure (as the OPP table structure was
never freed). That is messy and very unclear.
This patch makes parsed_static_opps an unsigned integer and uses it to
count the number of users of the static OPPs. The increment and
decrement to parsed_static_opps is done under opp_table->lock now to
make sure no races are possible if the OPP table is getting added and
removed in parallel (which doesn't happen in practice, but can in
theory).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
employed to optimize the operating voltage of a device. At a
given frequency, the hardware monitors dynamic factors and either
makes a suggestion for how much to adjust a voltage for the
current frequency, or it automatically adjusts the voltage
without software intervention. Add an API to the OPP library for
the former case, so that AVS type devices can update the voltages
for an OPP when the hardware determines the voltage should
change. The assumption is that drivers like CPUfreq or devfreq
will register for the OPP notifiers and adjust the voltage
according to suggestions that AVS makes.
This patch is derived from [1] submitted by Stephen.
[1] https://lore.kernel.org/patchwork/patch/599279/
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[Roger Lu: Changed to rcu less implementation]
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
[s.nawrocki@samsung.com: added handling of OPP min/max voltage]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
All the drivers, which use the OPP framework control regulators, which
are already enabled. Typically those regulators are also system critical,
due to providing power to CPU core or system buses. It turned out that
there are cases, where calling regulator_enable() on such boot-enabled
regulator has side-effects and might change its initial voltage due to
performing initial voltage balancing without all restrictions from the
consumers. Until this issue becomes finally solved in regulator core,
avoid calling regulator_enable()/disable() from the OPP framework.
This reverts commit 7f93ff73f7.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add enable regulators to dev_pm_opp_set_regulators() and disable
regulators to dev_pm_opp_put_regulators(). Even if bootloader
leaves regulators enabled, they should be enabled in kernel in
order to increase the reference count.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The list_kref was added for static OPPs and to track their users. The
kref is initialized while the static OPPs are added, but removed
unconditionally even if the static OPPs were never added. This causes
refcount mismatch warnings currently.
Fix that by always initializing the kref when the OPP table is first
initialized. The refcount is later incremented only for the second user
onwards.
Fixes: d0e8ae6c26 ("OPP: Create separate kref for static OPPs list")
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since the performance states in the OPP table are unique, implement a
dev_pm_opp_find_level_exact() in order to be able to fetch a specific OPP.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
[ Viresh: Updated commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The cpufreq drivers don't need to do runtime PM operations on the
virtual devices returned by dev_pm_domain_attach_by_name() and so the
virtual devices weren't shared with the callers of
dev_pm_opp_attach_genpd() earlier.
But the IO device drivers would want to do that. This patch updates the
prototype of dev_pm_opp_attach_genpd() to accept another argument to
return the pointer to the array of genpd virtual devices.
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A device may have multiple power-domains and not all of them may be
scalable (i.e. support performance states). But
dev_pm_opp_attach_genpd() doesn't take that into account currently.
Fix that by not verifying the names argument with "power-domain-names"
DT property and finding the index into the required-opps array. The
names argument will anyway get verified later on when we call
dev_pm_domain_attach_by_name().
Fixes: 6319aee10e ("opp: Attach genpds to devices from within OPP core")
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull operating performance points (OPP) framework changes for v5.3
from Viresh Kumar:
"This pull request contains:
- OPP core changes to support a wider range of devices, like IO
devices (Rajendra Nayak and Stehpen Boyd).
- Fixes around genpd_virt_devs (Viresh Kumar).
- Fix for platform with set_opp() callback (Dmitry Osipenko)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't use IS_ERR on invalid supplies
opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes
opp: Don't overwrite rounded clk rate
opp: Allocate genpd_virt_devs from dev_pm_opp_attach_genpd()
opp: Attach genpds to devices from within OPP core
_set_opp_custom() receives a set of OPP supplies as its arguments and
the caller of it passes NULL when the supplies are not valid. But
_set_opp_custom(), by mistake, checks for error by performing
IS_ERR(old_supply) on it which will always evaluate to false.
The problem was spotted during of testing of upcoming update for the
NVIDIA Tegra CPUFreq driver.
Cc: stable <stable@vger.kernel.org>
Fixes: 7e535993fa ("OPP: Separate out custom OPP handler specific code")
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For devices with performance state, we use dev_pm_opp_set_rate() to set
the appropriate clk rate and the performance state.
We do need a way to remove the performance state vote when we idle the
device and turn the clocks off. Use dev_pm_opp_set_rate() with freq = 0
to achieve this.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[ Viresh: Updated _set_required_opps() to handle the !opp case ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP table normally contains 'fmax' values corresponding to the
voltage or performance levels of each OPP, but we don't necessarily want
all the devices to run at fmax all the time. Running at fmax makes sense
for devices like CPU/GPU, which have a finite amount of work to do and
since a specific amount of energy is consumed at an OPP, its better to
run at the highest possible frequency for that voltage value.
On the other hand, we have IO devices which need to run at specific
frequencies only for their proper functioning, instead of maximum
possible frequency.
The OPP core currently roundup to the next possible OPP for a frequency
and select the fmax value. To support the IO devices by the OPP core,
lets do the roundup to fetch the voltage or performance state values,
but not use the OPP frequency value. Rather use the value returned by
clk_round_rate().
The current user, cpufreq, of dev_pm_opp_set_rate() already does the
rounding to the next OPP before calling this routine and it won't
have any side affects because of this change.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[ Viresh: Massaged changelog, added comment and use temp_opp variable
instead ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently the space for the array of virtual devices is allocated along
with the OPP table, but that isn't going to work well from now onwards.
For single power domain case, a driver can either use the original
device structure for setting the performance state (if genpd attached
with dev_pm_domain_attach()) or use the virtual device structure (if
genpd attached with dev_pm_domain_attach_by_name(), which returns the
virtual device) and so we can't know in advance if we are going to need
genpd_virt_devs array or not.
Lets delay the allocation a bit and do it along with
dev_pm_opp_attach_genpd() rather. The deallocation is done from
dev_pm_opp_detach_genpd().
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The OPP core requires the virtual device pointers to set performance
state on behalf of the device, for the multiple power domain case. The
genpd API (dev_pm_domain_attach_by_name()) has evolved now to support
even the single power domain case and that lets us add common code for
handling both the cases more efficiently.
The virtual device structure returned by dev_pm_domain_attach_by_name()
isn't normally used by the cpufreq drivers as they don't manage power
on/off of the domains and so is only useful for the OPP core.
This patch moves all the complexity into the OPP core to make the end
drivers simple. The earlier APIs dev_pm_opp_{set|put}_genpd_virt_dev()
are reworked into dev_pm_opp_{attach|detach}_genpd(). The new helper
dev_pm_opp_attach_genpd() accepts a NULL terminated array of strings
which contains names of all the genpd's to attach. It then attaches all
the domains and saves the pointers to the virtual devices. The other
helper undo the work done by this helper.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch introduces a new helper routine in the OPP core, which
returns the OPP with the highest frequency which has voltage less than
or equal to the target voltage passed to the helper.
Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
[ Viresh: Massaged the commit log and renamed the helper with some
cleanups. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
At boot up, CPUFreq core performs a sanity check to see if the system is
running at a frequency defined in the frequency table of the CPU. If so,
we try to find a valid frequency (lowest frequency greater than the
currently programmed frequency) from the table and set it. When the call
reaches dev_pm_opp_set_rate(), it calls _find_freq_ceil(opp_table,
&old_freq) to find the previously configured OPP and this call also
updates the old_freq. This eventually sets the old_freq == freq (new
target requested by cpufreq core) and we skip updating the performance
state in this case.
Fix this by also updating the performance state when the old_freq ==
freq.
Fixes: ca1b5d77b1 ("OPP: Configure all required OPPs")
Cc: v5.0 <stable@vger.kernel.org> # v5.0
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update the PM-runtime framework to use ktime instead of
jiffies for accounting (Thara Gopinath, Vincent Guittot).
- Optimize the autosuspend code in the PM-runtime framework
somewhat (Ladislav Michl).
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla).
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki).
- Add Jacobsville support to the intel_idle driver (Zhang Rui).
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam).
- Add new cpufreq driver for Armada 8K (Gregory Clement).
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar,
Amit Kucheria).
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar).
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria).
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar).
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang).
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki).
- Clean up multiple cpufreq drivers (Yangtao Li).
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn).
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann,
Matthias Kaehlcke).
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui).
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar).
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TSKG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are PM-runtime framework changes to use ktime instead of jiffies
for accounting, new PM core flag to mark devices that don't need any
form of power management, cpuidle updates including driver API
documentation and a new governor, cpufreq updates including a new
driver for Armada 8K, thermal cleanups and more, some energy-aware
scheduling (EAS) enabling changes, new chips support in the intel_idle
and RAPL drivers and assorted cleanups in some other places.
Specifics:
- Update the PM-runtime framework to use ktime instead of jiffies for
accounting (Thara Gopinath, Vincent Guittot)
- Optimize the autosuspend code in the PM-runtime framework somewhat
(Ladislav Michl)
- Add a PM core flag to mark devices that don't need any form of
power management (Sudeep Holla)
- Introduce driver API documentation for cpuidle and add a new
cpuidle governor for tickless systems (Rafael Wysocki)
- Add Jacobsville support to the intel_idle driver (Zhang Rui)
- Clean up a cpuidle core header file and the cpuidle-dt and ACPI
processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam)
- Add new cpufreq driver for Armada 8K (Gregory Clement)
- Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit
Kucheria)
- Add support for light-weight tear-down and bring-up of CPUs to the
cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar)
- Fix cpu_cooling Kconfig dependencies, add support for CPU cooling
auto-registration to the cpufreq core and use it in multiple
cpufreq drivers (Amit Kucheria)
- Fix some minor issues and do some cleanups in the davinci,
e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers
(Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel,
Taniya Das, Viresh Kumar)
- Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng
Wang)
- Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu,
Rafael Wysocki)
- Clean up multiple cpufreq drivers (Yangtao Li)
- Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas
Bulwahn)
- Add support for exposing the Energy Model via debugfs and make
multiple cpufreq drivers register an Energy Model to support
energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias
Kaehlcke)
- Add Ice Lake mobile and Jacobsville support to the Intel RAPL
power-capping driver (Gayatri Kammela, Zhang Rui)
- Add a power estimation helper to the operating performance points
(OPP) framework and clean up a core function in it (Quentin Perret,
Viresh Kumar)
- Make minor improvements in the generic power domains (genpd), OPP
and system suspend frameworks and in the PM core (Aditya Pakki,
Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)"
* tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits)
cpufreq: kryo: Release OPP tables on module removal
cpufreq: ap806: add missing of_node_put after of_device_is_available
cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
cpufreq: Pass updated policy to driver ->setpolicy() callback
cpufreq: Fix two debug messages in cpufreq_set_policy()
cpufreq: Reorder and simplify cpufreq_update_policy()
cpufreq: Add kerneldoc comments for two core functions
PM / core: Add support to skip power management in device/driver model
cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
cpufreq: intel_pstate: Avoid redundant initialization of local vars
powercap/intel_rapl: add Ice Lake mobile
ACPI / processor: Set P_LVL{2,3} idle state descriptions
cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
ACPI / CPPC: Add a helper to get desired performance
cpufreq: davinci: move configuration to include/linux/platform_data
cpufreq: speedstep: convert BUG() to BUG_ON()
cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
cpufreq: longhaul: remove unneeded semicolon
cpufreq: pcc-cpufreq: remove unneeded semicolon
..
* Add Qualcomm RPMh power domain driver and related changes
* Fix issues with sleep/wake sets and batch API in RPMh
* Update MAINTAINERS Qualcomm entry
* Fixup RMTFS-mem sysfs and uevents
* Fix error handling in GSBI
* Add SMD-RPM compatible entry for SDM660
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CcrU
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/drivers
Qualcomm ARM Based Driver Updates for v5.1
* Add Qualcomm RPMh power domain driver and related changes
* Fix issues with sleep/wake sets and batch API in RPMh
* Update MAINTAINERS Qualcomm entry
* Fixup RMTFS-mem sysfs and uevents
* Fix error handling in GSBI
* Add SMD-RPM compatible entry for SDM660
* tag 'qcom-drivers-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
soc: qcom: smd-rpm: Add sdm660 compatible
soc: qcom: gsbi: Fix error handling in gsbi_probe()
soc: qcom: rpmh: Avoid accessing freed memory from batch API
drivers: qcom: rpmh: avoid sending sleep/wake sets immediately
soc: qcom: rmtfs-mem: Make sysfs attributes world-readable
soc: qcom: rmtfs-mem: Add class to enable uevents
soc: qcom: update config dependencies for QCOM_RPMPD
soc: qcom: rpmpd: Drop family A RPM dependency
MAINTAINERS: update list of qcom drivers
soc: qcom: rpmhpd: Mark mx as a parent for cx
soc: qcom: rpmhpd: Add RPMh power domain driver
soc: qcom: rpmpd: Add support for get/set performance state
soc: qcom: rpmpd: Add a Power domain driver to model corners
dt-bindings: power: Add qcom rpm power domain driver bindings
OPP: Add support for parsing the 'opp-level' property
dt-bindings: opp: Introduce opp-level bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull operating performance points (OPP) framework updates for v5.1
from Viresh Kumar:
"This pull request contains following changes:
- Introduced new OPP helper for power-estimation and used it in
several cpufreq drivers (Quentin Perret, Matthias Kaehlcke, Dietmar
Eggemann, and Yangtao Li).
- OPP Debugfs cleanup (Greg KH).
- OPP core cleanup (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: OMAP: Register an Energy Model
cpufreq: imx6q: Register an Energy Model
opp: no need to check return value of debugfs_create functions
cpufreq: mediatek: Register an Energy Model
cpufreq: scmi: Register an Energy Model
cpufreq: arm_big_little: Register an Energy Model
cpufreq: scpi: Register an Energy Model
cpufreq: dt: Register an Energy Model
PM / OPP: Introduce a power estimation helper
PM / OPP: Remove unused parameter of _generic_set_opp_clk_only()
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-pm@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The previous frequency value isn't getting used in the routine
_generic_set_opp_clk_only(), drop it.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that the OPP bindings are updated to include an optional
'opp-level' property, add support to parse it from device tree
and store it as part of dev_pm_opp structure.
Also add and export an helper 'dev_pm_opp_get_level()' that can be
used to get the level value read from device tree when present.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Since the commit 2a4eb7358a "OPP: Don't remove dynamic OPPs from
_dev_pm_opp_remove_table()", dynamically created OPP aren't
automatically removed anymore by dev_pm_opp_cpumask_remove_table(). This
affects the scpi and scmi cpufreq drivers which no longer free OPPs on
failures or on invocations of the policy->exit() callback.
Create a generic OPP helper dev_pm_opp_remove_all_dynamic() which can be
called from these drivers instead of dev_pm_opp_cpumask_remove_table().
In dev_pm_opp_remove_all_dynamic(), we need to make sure that the
opp_list isn't getting accessed simultaneously from other parts of the
OPP core while the helper is freeing dynamic OPPs, i.e. we can't drop
the opp_table->lock while traversing through the OPP list. And to
accomplish that, this patch also creates _opp_kref_release_unlocked()
which can be called from this new helper with the opp_table lock already
held.
Cc: 4.20 <stable@vger.kernel.org> # v4.20
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Fixes: 2a4eb7358a "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()"
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_pm_genpd_set_performance_state() needs to handle performance state
propagation going forward. Currently this routine only gets the required
performance state of the device's genpd as an argument, but it doesn't
know how to translate that to master genpd(s) of the device's genpd.
Introduce a new helper dev_pm_opp_xlate_performance_state() which will
be used to translate from performance state of a device (or genpd
sub-domain) to another device (or master genpd).
Normally the src_table (of genpd sub-domain) will have the
"required_opps" property set to point to one of the OPPs in the
dst_table (of master genpd), but in some cases the genpd and its master
have one to one mapping of performance states and so none of them have
the "required-opps" property set. Return the performance state of the
src_table as it is in such cases.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There is one case where we may end up with no "supply" directory for the
OPPs in debugfs. That happens when the OPP core isn't managing the
regulators for the device and the device's OPP do have microvolt
property. It happens because the opp_table->regulator_count remains set
to 0 and the debugfs routines don't add any supply directory in such a
case.
This commit fixes that by setting opp_table->regulator_count to 1 in
that particular case. But to make everything work nicely and not break
other parts of the core, regulator_count is defined as "int" now instead
of "unsigned int" and it can have different special values now. It is
set to -1 initially to mark it "uninitialized" and later only we set it
to 0 or positive values after checking how many supplies are there.
This also helps in finding the bugs where only few of the OPPs have the
"opp-microvolt" property set and not all.
Fixes: 1fae788ed6 ("PM / OPP: Don't create debugfs "supply-0" directory unnecessarily")
Reported-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The value of opp_table->regulator_count is not very consistent right now
and it may end up being 0 while we do have a "opp-microvolt" property in
the OPP table. It was kept that way as we used to check if any
regulators are set with the OPP core for a device or not using value of
regulator_count.
Lets use opp_table->regulators for that purpose as the meaning of
regulator_count is going to change in the later patches.
Reported-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Now that all the infrastructure is in place to support multiple required
OPPs, lets switch over to using it.
A new internal routine _set_required_opps() takes care of updating
performance state for all the required OPPs. With this the performance
state updates are supported even when the end device needs to configure
regulators as well, that wasn't the case earlier.
The pstates were earlier stored in the end device's OPP structures, that
also changes now as those values are stored in the genpd's OPP
structures. And so we switch over to using
pm_genpd_opp_to_performance_state() instead of
of_genpd_opp_to_performance_state() to get performance state for the
genpd OPPs.
The routine _generic_set_opp_domain() is not required anymore and is
removed.
On errors we don't try to recover by reverting to old settings as things
are really complex now and the calls here should never really fail
unless there is a bug. There is no point increasing the complexity, for
code which will never be executed.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Multiple generic power domains for a consumer device are supported with
the help of virtual devices, which are created for each consumer device
- genpd pair. These are the device structures which are attached to the
power domain and are required by the OPP core to set the performance
state of the genpd.
The helpers added by this commit are required to be called once for each
of these virtual devices. These are required only if multiple domains
are available for a device, otherwise the actual device structure will
be used instead by the OPP core.
The new helpers also support the complex cases where the consumer device
wouldn't always require all the domains. For example, a camera may
require only one power domain during normal operations but two during
high resolution operations. The consumer driver can call
dev_pm_opp_put_genpd_virt_dev(high_resolution_genpd_virt_dev) if it is
currently operating in the normal mode and doesn't have any performance
requirements from the genpd which manages high resolution power
requirements. The consumer driver can later call
dev_pm_opp_set_genpd_virt_dev(high_resolution_genpd_virt_dev) once it
switches back to the high resolution mode.
The new helpers differ from other OPP set/put helpers as the new ones
can be called with OPPs initialized for the table as we may need to call
them on the fly because of the complex case explained above. For this
reason it is possible that the genpd virt_dev structure may be used in
parallel while the new helpers are running and a new mutex is added to
protect against that. We didn't use the existing opp_table->lock mutex
as that is widely used in the OPP core and we will need this lock in the
dev_pm_opp_set_rate() helper while changing OPP and we need to make sure
there is not much contention while doing that as that's the hotpath.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
An earlier commit populated the OPP tables from the "required-opps"
property, this commit populates the individual OPPs. This is repeated
for each OPP in the OPP table and these populated OPPs will be used by
later commits.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The current implementation works only for the case where a single
phandle is present in the "required-opps" property, while DT allows
multiple phandles to be present there.
This patch adds new infrastructure to parse all the phandles present in
"required-opps" property and save pointers of the required OPP's OPP
tables. These will be used by later commits.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Create a separate routine to take care of custom set_opp() handler
specific stuff.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Return error number instead of 0 on failures.
Fixes: a1e8c13600 ("PM / OPP: "opp-hz" is optional for power domains")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When two or more devices are sharing their clock and voltage rails, they
share the same OPP table. But there are some corner cases where the OPP
core incorrectly creates separate OPP tables for them.
For example, CPU 0 and 1 share clock/voltage rails. The platform
specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP
core creates an OPP table for it (the individual OPPs aren't initialized
as of now). The same is repeated for CPU1 then. Because
_opp_get_opp_table() doesn't compare DT node pointers currently, it
fails to find the link between CPU0 and CPU1 and so creates a new OPP
table.
Fix this by calling _managed_opp() from _opp_get_opp_table().
_managed_opp() gain an additional argument (index) to get the right node
pointer. This resulted in simplifying code in _of_add_opp_table_v2() as
well.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently there are two separate ways to free the OPP table based on how
it is created in the first place.
We call _dev_pm_opp_remove_table() to free the static and/or dynamic
OPP, OPP list devices, etc. This is done for the case where the OPP
table is added while initializing the OPPs, like via the path
dev_pm_opp_of_add_table().
We also call dev_pm_opp_put_opp_table() in some cases which eventually
frees the OPP table structure once the reference count reaches 0. This
is used by the first case as well as other cases like
dev_pm_opp_set_regulators() where the OPPs aren't necessarily
initialized at this point.
This whole thing is a bit unclear and messy and obstruct any further
cleanup/fixup of OPP core.
This patch tries to streamline this by keeping a single path for OPP
table destruction, i.e. dev_pm_opp_put_opp_table().
All the cleanup happens in _opp_table_kref_release() now after the
reference count reaches 0. _dev_pm_opp_remove_table() is removed as it
isn't required anymore.
We don't drop the reference to the OPP table after creating it from
_of_add_opp_table_v{1|2}() anymore and the same is dropped only when we
try to remove them.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Only one platform was depending on this feature and it is already
updated now. Stop removing dynamic OPPs from _dev_pm_opp_remove_table().
This simplifies lot of paths and removes unnecessary parameters.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The static OPPs don't always get freed with the OPP table, it can happen
before that as well. For example, if the OPP table is first created
using helpers like dev_pm_opp_set_supported_hw() and the OPPs are
created at a later point. Now when the OPPs are removed, the OPP table
stays until the time dev_pm_opp_put_supported_hw() is called.
Later patches will streamline the freeing of OPP table and that requires
the static OPPs to get freed with help of a separate kernel reference.
This patch prepares for that by creating a separate kref for static OPPs
list.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The reference count is only required to be incremented for every call
that may lead to adding the OPP table. For static OPPs the same should
be done from the parent routine which adds all static OPPs together and
so only one refcount for all static OPPs.
Update code to reflect that.
The refcount is incremented every time a dynamic OPP is created (as that
can lead to creating the OPP table) and the same is dropped when the OPP
is removed.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This is a preparatory patch required for the next commit which will
start using OPP table's node pointer in _of_init_opp_table(), which
requires the index in order to read the OPP table's phandle.
This commit adds the index argument in the call chains in order to get
it delivered to _of_init_opp_table().
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_list needs to be protected with a lock, else we may have
simultaneous access (addition/removal) to it and that would be racy.
Extend scope of the opp_table lock to protect dev_list as well.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.
At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.
The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.
dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).
Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq || freq > old_freq.
if (freq > old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
if (ret)
It results in, no voltage update while clk rate is updated.
Example:
freq-table = {
1000MHz 1.15V
666MHZ 1.10V
333MHz 1.05V
}
boot-up-freq = 800MHz # not listed in freq-table
freq = target_freq = 1GHz
old_freq = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!)
old_freq = 1GHz
Fixes: 6a0712f6f1 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+ <stable@vger.kernel.org> # v4.6+
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_register_set_opp_helper() for all
possible CPUs, even if some of them share the OPP table as the caller
may not be aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_register_put_opp_helper()
the same number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_register_set_opp_helper() is called for the same OPP table,
dev_pm_opp_register_put_opp_helper() frees the resources on the very
first call made to it, assuming that the caller would be calling it
sequentially for all the CPUs. We can revisit that if that assumption is
broken in the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_set_regulators() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_regulators() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_regulators() is called for the same OPP table,
dev_pm_opp_put_regulators() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_set_prop_name() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_prop_name() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_prop_name() is called for the same OPP table,
dev_pm_opp_put_prop_name() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It should be fine to call dev_pm_opp_set_supported_hw() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_supported_hw() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_supported_hw() is called for the same OPP table,
dev_pm_opp_put_supported_hw() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The genpd core provides an API now to retrieve the performance state
from DT, use that instead of the ->get_pstate() callback.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
A device's DT node or its OPP nodes can contain a phandle to other
device's OPP node, in the "required-opps" property.
This patch implements a routine to find that required OPP from the node
that contains the "required-opps" property.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
"opp-hz" property is optional for power domains now and we shouldn't
error out if it is missing for power domains.
This patch creates two new routines, _get_opp_count() and
_opp_is_duplicate(), by separating existing code from their parent
functions. Also skip duplicate OPP check for power domain OPPs as they
may not have any the "opp-hz" field, but a platform specific performance
state binding to uniquely identify OPP nodes.
By default the debugfs OPP nodes are named using the "rate" value, but
that isn't possible for the power domain OPP nodes and hence they use
the index of the OPP node in the OPP node list instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
This adds the dev_pm_opp_{un}register_get_pstate_helper() helper
routines which will be used to set the get_pstate() callback for a
device. This callback will be later called internally by the OPP core to
get performance state corresponding to an OPP.
This is required temporarily until the time we have proper DT bindings
to include the performance state information.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The genpd framework now provides an API to request device's power
domain to update its performance state. Use that interface from the
OPP core for devices whose power domains support performance states.
Note that this commit doesn't add any mechanism by which performance
states are made available to the OPP core. That would be done by a
later commit.
Note that the current implementation is restricted to the case where
the device doesn't have separate regulators for itself. We shouldn't
over engineer the code before we have real use case for them. We can
always come back and add more code to support such cases later on.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The routine is named incorrectly since the first attempt as there is
nothing like a put_opp() helper. We wanted to unregister the set_opp()
helper here and so it should rather be named as
dev_pm_opp_unregister_set_opp_helper().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some i.MX6 platforms which do not have speed grading
check, opp table will not be created in platform code,
so cpufreq driver prints the following error message:
cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
However, this is not really an error in this case because the
imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count()
and if it fails, it means that platform code does not provide
OPP and then dev_pm_opp_of_add_table() will be called.
In order to avoid such confusing error message, move it to
debug level.
It is up to the caller of dev_pm_opp_get_opp_count() to check its
return value and decide if it will print an error or not.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The drivers/base/power/ directory is special and contains code related
to power management core like system suspend/resume, hibernation, etc.
It was fine to keep the OPP code inside it when we had just one file for
it, but it is growing now and already has a directory for itself.
Lets move it directly under drivers/ directory, just like cpufreq and
cpuidle.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
