Commit 95b88f4d71 ("dm writecache: pause
writeback if cache full and origin being written directly") introduced a
code that pauses cache flushing if we are issuing writes directly to the
origin.
Improve that initial commit by making the timeout code configurable
(via the option "pause_writeback"). Also change the default from 1s to
3s because it performed better.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Implementation reuses dm_io_tracker, that until now was only used by
dm-cache, to track if any writes were issued directly to the origin
(due to cache being full) within the last second. If so writeback is
paused for a second.
This change improves performance for when the cache is full and IO is
issued directly to the origin device (rather than through the cache).
Depends-on: d53f1fafec ("dm writecache: do direct write if the cache is full")
Suggested-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds
Signed-off-by: Hou Tao <houtao1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Make sure that the zone write pointer offset array is allocated with a
vmalloc in dm_zone_revalidate_cb() by passing GFP_KERNEL gfp flag to
kvcalloc(). However, since we do not want to trigger IOs while
revalidating zones, change dm_revalidate_zones() to have the zone scan
done in GFP_NOIO context using memalloc_noio_save/restore calls.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: bb37d77239 ("dm: introduce zone append emulation")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The continue statement at the end of a for-loop has no effect,
remove it.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a "metadata_only" parameter that when present: only metadata is
promoted to the cache. This option improves performance for heavier
REQ_META workloads (e.g. device-mapper-test-suite's "git clone and
checkout" benchmark improves from 341s to 312s).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
SSDs perform badly with sub-4k writes (because they perfrorm
read-modify-write internally), so make sure writecache writes at least
4k when committing.
Fixes: 991bd8d7bc ("dm writecache: commit just one block, not a full page")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit d53f1fafec ("dm writecache: do
direct write if the cache is full") changed dm-writecache, so that it
writes directly to the origin device if the cache is full.
Unfortunately, it doesn't forward flush requests to the origin device,
so that there is a bug where flushes are being ignored.
Fix this by adding missing flush forwarding.
For PMEM mode, we fix this bug by disabling direct writes to the origin
device, because it performs better.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: d53f1fafec ("dm writecache: do direct write if the cache is full")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Make dm-writecache wait if the kcopyd workqueue is busy (as will
happen if waiting for page allocation or inside submit_bio).
This change improves performance of "mkfs.ext2" by approximately 20%
on one testbed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Some architectures have pages larger than 4k and committing a full
page causes needless overhead.
Fix this by writing a single block when committing the superblock.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Zone append BIOs (REQ_OP_ZONE_APPEND) always specify the start sector
of the zone to be written instead of the actual sector location to
write. The write location is determined by the device and returned to
the host upon completion of the operation. This interface, while simple
and efficient for writing into sequential zones of a zoned block
device, is incompatible with the use of sector values to calculate a
cypher block IV. All data written in a zone end up using the same IV
values corresponding to the first sectors of the zone, but read
operation will specify any sector within the zone resulting in an IV
mismatch between encryption and decryption.
To solve this problem, report to DM core that zone append operations are
not supported. This result in the zone append operations being emulated
using regular write operations.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move the definitions of struct dm_target_io, struct dm_io and the bits
of the flags field of struct mapped_device from dm.c to dm-core.h to
make them usable from dm-zone.c. For the same reason, declare
dec_pending() in dm-core.h after renaming it to dm_io_dec_pending().
And for symmetry of the function names, introduce the inline helper
dm_io_inc_pending() instead of directly using atomic_inc() calls.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
A target map method requesting the requeue of a bio with
DM_MAPIO_REQUEUE or completing it with DM_ENDIO_REQUEUE can cause
unaligned write errors if the bio is a write operation targeting a
sequential zone. If a zoned target request such a requeue, warn about
it and kill the IO.
The function dm_is_zone_write() is introduced to detect write operations
to zoned targets.
This change does not affect the target drivers supporting zoned devices
and exposing a zoned device, namely dm-crypt, dm-linear and dm-flakey as
none of these targets ever request a requeue.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
To simplify the implementation of the report_zones operation of a zoned
target, introduce the function dm_report_zones() to set a target
mapping start sector in struct dm_report_zones_args and call
blkdev_report_zones(). This new function is exported and the report
zones callback function dm_report_zones_cb() is not.
dm-linear, dm-flakey and dm-crypt are modified to use dm_report_zones().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move core and table code used for zoned targets and conditionally
defined with #ifdef CONFIG_BLK_DEV_ZONED to the new file dm-zone.c.
This file is conditionally compiled depending on CONFIG_BLK_DEV_ZONED.
The small helper dm_set_zones_restrictions() is introduced to
initialize a mapped device request queue zone attributes in
dm_table_set_restrictions().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In device_area_is_invalid(), use bdev_is_zoned() instead of open
coding the test on the zoned model returned by bdev_zoned_model().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix dm_accept_partial_bio() to actually check that zone management
commands are not passed as explained in the function documentation
comment. Also, since a zone append operation cannot be split, add
REQ_OP_ZONE_APPEND as a forbidden command.
White lines are added around the group of BUG_ON() calls to make the
code more legible.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The dm-zoned target cannot support zoned block devices with zones that
have a capacity smaller than the zone size (e.g. NVMe zoned namespaces)
due to the current chunk zone mapping implementation as it is assumed
that zones and chunks have the same size with all blocks usable.
If a zoned drive is found to have zones with a capacity different from
the zone size, fail the target initialization.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The only usage of dm_ksm_ll_ops is to make a copy of it to the ksm_ll_ops
field in the blk_keyslot_manager struct. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the DM device is suspended, interrupt the writeback sequence so
that there is no excessive suspend delay.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If dm-writecache overwrites existing cached data, it splits the
incoming bio into many block-sized bios. The I/O scheduler does merge
these bios into one large request but this needless splitting and
merging causes performance degradation.
Fix this by avoiding bio splitting if the cache target area that is
being overwritten is contiguous.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The functions "pop", "push_head", "do_work" can only be called from
process context. Therefore, replace spin_lock_irq{save,restore} with
spin_{lock,unlock}_irq.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The functions set_bit and clear_bit are atomic. We don't need
atomicity when making flags for dm-kcopyd. So, change them to direct
manipulation of the flags.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The disk space map stores it's index entries in a btree, these are
accessed very frequently, so having a few cached makes a big difference
to performance.
With this change provisioning a new block takes roughly 20% less cpu.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When we break sharing on btree nodes we typically need to increment
the reference counts to every value held in the node. This can
cause a lot of repeated calls to the space maps. Fix this by changing
the interface to the space map inc/dec methods to take ranges of
adjacent blocks to be operated on.
For installations that are using a lot of snapshots this will reduce
cpu overhead of fundamental operations such as provisioning a new block,
or deleting a snapshot, by as much as 10 times.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Current commit code resets the place where the search for free blocks
will begin back to the start of the metadata device. There are a couple
of repercussions to this:
- The first allocation after the commit is likely to take longer than
normal as it searches for a free block in an area that is likely to
have very few free blocks (if any).
- Any free blocks it finds will have been recently freed. Reusing them
means we have fewer old copies of the metadata to aid recovery from
hardware error.
Fix these issues by leaving the cursor alone, only resetting when the
search hits the end of the metadata device.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This commit improves the residency of btrees built in the metadata for
dm-thin and dm-cache.
When inserting a new entry into a full btree node the current code
splits the node into two. This can result in very many half full nodes,
particularly if the insertions are occurring in an ascending order (as
happens in dm-thin with large writes).
With this commit, when we insert into a full node we first try and move
some entries to a neighbouring node that has space, failing that it
tries to split two neighbouring nodes into three.
Results are given below. 'Residency' is how full nodes are on average
as a percentage. Average instruction counts for the operations
are given to show the extra processing has little overhead.
+--------------------------+--------------------------+
| Before | After |
+------------+-----------+-----------+--------------+-----------+--------------+
| Test | Phase | Residency | Instructions | Residency | Instructions |
+------------+-----------+-----------+--------------+-----------+--------------+
| Ascending | insert | 50 | 1876 | 96 | 1930 |
| | overwrite | 50 | 1789 | 96 | 1746 |
| | lookup | 50 | 778 | 96 | 778 |
| Descending | insert | 50 | 3024 | 96 | 3181 |
| | overwrite | 50 | 1789 | 96 | 1746 |
| | lookup | 50 | 778 | 96 | 778 |
| Random | insert | 68 | 3800 | 84 | 3736 |
| | overwrite | 68 | 4254 | 84 | 3911 |
| | lookup | 68 | 779 | 84 | 779 |
| Runs | insert | 63 | 2546 | 82 | 2815 |
| | overwrite | 63 | 2013 | 82 | 1986 |
| | lookup | 63 | 778 | 82 | 779 |
+------------+-----------+-----------+--------------+-----------+--------------+
Ascending - keys are inserted in ascending order.
Descending - keys are inserted in descending order.
Random - keys are inserted in random order.
Runs - keys are split into ascending runs of ~20 length. Then
the runs are shuffled.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # contains_key() fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 7ee06ddc40 ("dm snapshot: fix a
crash when an origin has no snapshots") introduced a regression in
snapshot merging - causing the lvm2 test lvcreate-cache-snapshot.sh
got stuck in an infinite loop.
Even though commit 7ee06ddc40 was marked
for stable@ the stable team was notified to _not_ backport it.
Fixes: 7ee06ddc40 ("dm snapshot: fix a crash when an origin has no snapshots")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The third parameter of module_param() is permissions for the sysfs node
but it looks like it is being used as the initial value of the parameter
here. In fact, false here equates to omitting the file from sysfs and
does not affect the value of require_signatures.
Making the parameter writable is not simple because going from
false->true is fine but it should not be possible to remove the
requirement to verify a signature. But it can be useful to inspect the
value of this parameter from userspace, so change the permissions to
make a read-only file in sysfs.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use the types __le* instead of __u* to fix sparse warnings.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Revert the commit 7a5b96b478 ("dm integrity:
use discard support when recalculating").
There's a bug that when we write some data beyond the current recalculate
boundary, the checksum will be rewritten with the discard filler later.
And the data will no longer have integrity protection. There's no easy
fix for this case.
Also, another problematic case is if dm-integrity is used to detect
bitrot (random device errors, bit flips, etc); dm-integrity should
detect that even for unused sectors. With commit 7a5b96b478 it can
happen that such change is undetected (because discard filler is not a
valid checksum).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The following commands will crash the kernel:
modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"
The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.
In order to fix the bug, we set the variable "r" to -EINVAL.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
My UEK-derived config has 1030 files depending on pagemap.h before this
change. Afterwards, just 326 files need to be rebuilt when I touch
pagemap.h. I think blkdev.h is probably included too widely, but
untangling that dependency is harder and this solves my problem. x86
allmodconfig builds, but there may be implicit include problems on other
architectures.
Link: https://lkml.kernel.org/r/20210309195747.283796-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com> [nvdimm]
Acked-by: Jens Axboe <axboe@kernel.dk> [block]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> [scsi]
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or
kvmalloc_array instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device
remove after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve
hash recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmCMVxkTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjD7B/4mucuval0w8OBl7MPE5mR/tPmU/Avr
iFmXQjofjXCXGdCk7XqOqKZGKlm/jCTQkhbZPEo5PTCZPf6iGyeoSFOC0xck9HUI
9EJNrnx6L0ch3OS5IREgc3oO7vXFnmnLvmo27t7yUaqWqdMBIZ/rEA6Ro7oq4pXc
fo/Yqka2iuS0X2RKhAbci2KAOWdeX400nqH7bHaR5VgOE3JRJtsEWRTmkngB4bzM
Bsz2zzaSnbFa/Nlg2cH69kw2NJpZsAoKmoQ0OJt7QQs+GYLvCbioQnlxLPSFhlKX
4mSPPPKy3TxaAqsHXt+gCG6Vs8VvvgK0iHIa9e0ifIy3wvLoosLpIXhc
=k1ND
-----END PGP SIGNATURE-----
Merge tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve scalability of DM's device hash by switching to rbtree
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or kvmalloc_array
instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device remove
after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve hash
recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
* tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm raid: remove unnecessary discard limits for raid0 and raid10
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
dm integrity: use discard support when recalculating
dm integrity: increase RECALC_SECTORS to improve recalculate speed
dm integrity: don't re-write metadata if discarding same blocks
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
dm raid: fix fall-through warning in rs_check_takeover() for Clang
dm clone metadata: remove unused function
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm: replace dm_vcalloc()
dm space map common: fix division bug in sm_ll_find_free_block()
dm persistent data: packed struct should have an aligned() attribute too
dm btree spine: remove paranoid node_check call in node_prep_for_write()
dm space map disk: remove redundant calls to sm_disk_get_nr_free()
dm integrity: add the "reset_recalculate" feature flag
dm persistent data: remove unused return from exit_shadow_spine()
dm cache: remove needless request_queue NULL pointer checks
dm thin: remove needless request_queue NULL pointer check
dm: unexport dm_{get,put}_table_device
dm ebs: fix a few typos
...
When loading a device-mapper table for a request-based mapped device,
and the allocation/initialization of the blk_mq_tag_set for the device
fails, a following device remove will cause a double free.
E.g. (dmesg):
device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device
device-mapper: ioctl: unable to set up device queue for new table.
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0305e098835de000 TEID: 0305e098835de803
Fault in home space mode while using kernel ASCE.
AS:000000025efe0007 R3:0000000000000024
Oops: 0038 ilc:3 [#1] SMP
Modules linked in: ... lots of modules ...
Supported: Yes, External
CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3
Hardware name: IBM 8561 T01 7I2 (LPAR)
Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000
000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000
000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640
00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8
Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8
000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58
#000000025e368ec4: e3b010000008 ag %r11,0(%r1)
>000000025e368eca: e310b0080004 lg %r1,8(%r11)
000000025e368ed0: a7110001 tmll %r1,1
000000025e368ed4: a7740129 brc 7,25e369126
000000025e368ed8: e320b0080004 lg %r2,8(%r11)
000000025e368ede: b904001b lgr %r1,%r11
Call Trace:
[<000000025e368eca>] kfree+0x42/0x330
[<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8
[<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod]
[<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod]
[<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod]
[<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod]
[<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod]
[<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod]
[<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0
[<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40
[<000000025e8c15ac>] system_call+0xd8/0x2c8
Last Breaking-Event-Address:
[<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8
Kernel panic - not syncing: Fatal exception: panic_on_oops
When allocation/initialization of the blk_mq_tag_set fails in
dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer
is not reset to NULL; so when dev_remove() later gets into
dm_mq_cleanup_mapped_device() it sees the pointer and tries to
uninitialize and free it again.
Fix this by setting the pointer to NULL in dm_mq_init_request_queue()
error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().
Cc: <stable@vger.kernel.org> # 4.6+
Fixes: 1c357a1e86 ("dm: allocate blk_mq_tag_set rather than embed in mapped_device")
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we have discard support we don't have to recalculate hash - we can
just fill the metadata with the discard pattern.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Increase RECALC_SECTORS because it improves recalculate speed slightly
(from 390kiB/s to 410kiB/s).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we discard already discarded blocks we do not need to write discard
pattern to the metadata, because it is already there.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmCHCR8ACgkQiXL039xt
wCZyFQ//fnUZaXR2K354zDyW6CJljMf+d94RF6rH+J6eMTH2/HXa5v0iJokwABLf
ussP6qF4k5wtmI22Gm9A5Zc3e4iiry5pC0jOdk0mk4gzWwFN9MdgNxJZIGA3xqhS
bsBK4AGrVKjtZl48G1/ZxJuNDeJhVp6GNK2n6/Gl4rZF6R7D/Upz0XelyJRdDpcM
HIGma7jZl6xfGU0mdWCzpOGK1zdMca1WVs7A4YuurSbLn5PZJrcNVWLouDqt/Si2
AduSri1gyPClicgvqWjMOzhUpuw/nJtBLRl1x1EsWk/KSZ1/uNVjlewfzdN4fZrr
zbtFr2gLubYLK6JOX7/LqoHlOTgE3tYLL+WIVN75DsOGZBKgHhmebTmWLyqzV0SL
oqcyM5d3ucC6msdtAK5Fv4MSp8rpjqlK1Ha4SGRT6kC2wut7AhZ3KD7eyRIz8mV9
Sa9mhignGFJnTEUp+LSbYdrAudgSKxB40WyXPmswAXX4VJFRD4ONrrcAON/SzkUT
Hw/JdFRCKkJjgwNQjIQoZcUNMTbFz2PlNIEnjJWm38YImQKQlCb2mXaZKCwBkf45
aheCZk17eKoxTCXFMd+KxlyNEtS2yBfq/PpZgvw7GW/pfFbWUg1+2O41LnihIe5v
zu0hN1wNCQqgfxiMZqX1OTb9C/2vybzGsXILt+9nppjZ8EBU7iU=
=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.
Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).
Fixes: eeba6809d8 ("md/raid1: end bio when the device faulty")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Paul Clements <paul.clements@us.sios.com>
Signed-off-by: Song Liu <song@kernel.org>
