mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 12:42:02 +00:00
5bdaf3625a
42059 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Hangbin Liu
|
863ff546fb |
selftests: forwarding: skip if kernel not support setting bridge fdb learning limit
If the testing kernel doesn't support setting fdb_max_learned or show
fdb_n_learned, just skip it. Or we will get errors like
./bridge_fdb_learning_limit.sh: line 218: [: null: integer expression expected
./bridge_fdb_learning_limit.sh: line 225: [: null: integer expression expected
Fixes:
|
||
Linus Torvalds
|
d7e78951a8 |
Notably this includes fixes for a s390 build breakage.
Including fixes from netfilter.
Current release - new code bugs:
- eth: fbnic: fix s390 build.
- eth: airoha: fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Q1xF
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Notably this includes fixes for a s390 build breakage.
Current release - new code bugs:
- eth: fbnic: fix s390 build
- eth: airoha: fix NULL pointer dereference in
airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow"
* tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
eth: fbnic: don't build the driver when skb has more than 21 frags
net: dsa: b53: Limit chip-wide jumbo frame config to CPU ports
net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU ports
net: airoha: Fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
net: wwan: t7xx: add support for Dell DW5933e
ipv4: Fix incorrect TOS in fibmatch route get reply
ipv4: Fix incorrect TOS in route get reply
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
driver core: auxiliary bus: Fix documentation of auxiliary_device
net: airoha: fix error branch in airoha_dev_xmit and airoha_set_gdm_ports
gve: Fix XDP TX completion handling when counters overflow
ipvs: properly dereference pe in ip_vs_add_service
selftests: netfilter: add test case for recent mismatch bug
netfilter: nf_set_pipapo: fix initial map fill
netfilter: ctnetlink: use helper function to calculate expect ID
eth: fbnic: fix s390 build.
|
||
|
Linus Torvalds
|
12cc3d5389 |
sound updates for 6.11-rc1
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----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=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
|
||
|
Linus Torvalds
|
f4f92db439 |
virtio: features, fixes, cleanups
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
|
||
|
Linus Torvalds
|
ef7c8f2b1f |
iommufd for 6.11 merge window
Major changes: - The iova_bitmap logic for efficiently reporting dirty pages back to userspace has a few more tricky corner case bugs that have been resolved and backed with new tests. The revised version has simpler logic. - Shared branch with iommu for handle support when doing domain attach. Handles allow the domain owner to include additional private data on a per-device basis. - IO Page Fault Reporting to userspace via iommufd. Page faults can be generated on fault capable HWPTs when a translation is not present. Routing them to userspace would allow a VMM to be able to virtualize them into an emulated vIOMMU. This is the next step to fully enabling vSVA support. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZpfo4AAKCRCFwuHvBreF YTO6APwMLxeWmHbE1H+7ZPuXP7B1aDuwRLczZOo3i816pIj+bQD+OywEA/NcljK6 6NLeqyUe7tECtVrFPSiRT9lWVuzZSQs= =rnN/ -----END PGP SIGNATURE----- Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: - The iova_bitmap logic for efficiently reporting dirty pages back to userspace has a few more tricky corner case bugs that have been resolved and backed with new tests. The revised version has simpler logic. - Shared branch with iommu for handle support when doing domain attach. Handles allow the domain owner to include additional private data on a per-device basis. - IO Page Fault Reporting to userspace via iommufd. Page faults can be generated on fault capable HWPTs when a translation is not present. Routing them to userspace would allow a VMM to be able to virtualize them into an emulated vIOMMU. This is the next step to fully enabling vSVA support. * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (26 commits) iommufd: Put constants for all the uAPI enums iommufd: Fix error pointer checking iommufd: Add check on user response code iommufd: Remove IOMMUFD_PAGE_RESP_FAILURE iommufd: Require drivers to supply the cache_invalidate_user ops iommufd/selftest: Add coverage for IOPF test iommufd/selftest: Add IOPF support for mock device iommufd: Associate fault object with iommufd_hw_pgtable iommufd: Fault-capable hwpt attach/detach/replace iommufd: Add iommufd fault object iommufd: Add fault and response message definitions iommu: Extend domain attach group with handle support iommu: Add attach handle to struct iopf_group iommu: Remove sva handle list iommu: Introduce domain attachment handle iommufd/iova_bitmap: Remove iterator logic iommufd/iova_bitmap: Dynamic pinning on iova_bitmap_set() iommufd/iova_bitmap: Consolidate iova_bitmap_set exit conditionals iommufd/iova_bitmap: Move initial pinning to iova_bitmap_for_each() iommufd/iova_bitmap: Cache mapped length in iova_bitmap_map struct ... |
||
|
Linus Torvalds
|
76d9b92e68 |
slab updates for 6.11
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmaXl0kACgkQu+CwddJF
iJrOlgf+N/G7BmgoW2CBF7mKsvCYs+pX3xeBuxPtsuq4FD386nsPFMN8gWAYLG3q
ZU1z1S+0M8LhTg6/G9jMYLHt2Y7WhYbhFTjTHmULJkuhMDTUP9CRYy4XZ+hdPtHF
30ezSdJQF9x/XxCSaaRVK1s+SMVHFg5xAOHKpfkNSamcMz9g+ZkYyPBr10/VoKd0
JqwhW7r6hrlvWAiqY3QKCOvohIWglgvBUnNjUGMh1cUkOE2aYLYHklhRwICKgA6z
p/2BUXiAEWUtgBkUrizwm/pdhJXLs0pOeYarVZP1v83tQMxyrc6XLNnqhvxP3DPW
31thF5Rf9I8WaWTczXhxsAwFjqO3KQ==
=4uf9
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
|
||
|
Linus Torvalds
|
b2fc97c186 |
memblock: updates for 6.11-rc1
* reserve_mem command line parameter to allow creation of named memory reservation at boot time. The driving use-case is to improve the ability of pstore to retain ramoops data across reboots. * cleaunps and small improvements in memblock and mm_init * new tests cases in memblock test suite -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmaXfoIQHHJwcHRAa2Vy bmVsLm9yZwAKCRA5A4Ymyw79kU5mCAC23vIrB8FRlORczMYj+V3VFss3OjKT92lS fHGwq2oxHW+rdDpHXFObHU0D3k8d2l5jyrENRAAyA02qR0L6Pv8Na6pGxQua1eic VIdw0PFQMsizD1AIj84Y6skkyyF/tvZHpmX0B12D5+Ur65DC/Z867Cm/lE33/fHv /1+QB0JlG7W+FzxVstYyebY5/DVkH+bC7/A57FE2oB4BRXjEd8v9tTHBS4kRSvrE zE2KFxeGajN749LHztIpIprPKehu8Gc3oLrYLNJO+uLFVCV8ey3OqVj0RXMG2wLl hmVYqhbZM/Uz59D/P8pULD49f1Thjv/5A/MvUZ3SxM6zpWlsincf =xrZd -----END PGP SIGNATURE----- Merge tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock updates from Mike Rapoport: - 'reserve_mem' command line parameter to allow creation of named memory reservation at boot time. The driving use-case is to improve the ability of pstore to retain ramoops data across reboots. - cleanups and small improvements in memblock and mm_init - new tests cases in memblock test suite * tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: fix implicit declaration of function 'numa_valid_node' memblock: Move late alloc warning down to phys alloc pstore/ramoops: Add ramoops.mem_name= command line option mm/memblock: Add "reserve_mem" to reserved named memory at boot up mm/mm_init.c: don't initialize page->lru again mm/mm_init.c: not always search next deferred_init_pfn from very beginning mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition mm/mm_init.c: get the highest zone directly mm/mm_init.c: move nr_initialised reset down a bit mm/memblock: fix a typo in description of for_each_mem_region() mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap mm/memblock: return true directly on finding overlap region memblock tests: add memblock_overlaps_region_checks mm/memblock: fix comment for memblock_isolate_range() memblock tests: add memblock_reserve_many_may_conflict_check() memblock tests: add memblock_reserve_all_locations_check() mm/memblock: remove empty dummy entry |
||
|
Linus Torvalds
|
68b5973045 |
perf tools changes for v6.11
Build ----- * Build each directory as a library so that depedency check for the python extension module can be automatic. But it also introduces some trivial merge conflicts with other trees that touched perf tools codes. Basically it changes perf-y to perf-util-y or similar and you can find the resolution in the perf-next tree here. - https://lore.kernel.org/r/Zn8HeRRX3JV2IcxQ@sirena.org.uk - https://lore.kernel.org/r/20240709100536.238f4d12@canb.auug.org.au * Use pkg-config to check libtraceevent and libtracefs. perf sched ---------- * Add --task-name and --fuzzy-name options for `perf sched map`. It's to focus on selected tasks only by removing unrelated tasks in the output. It matches the task comm with the given string and the --fuzzy-name option allows the partial matching. $ sudo perf sched record -a sleep 1 $ sudo perf sched map --task-name kworker --fuzzy-name . . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521 . . . . - *- . . 481065.315160 secs *B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860 *- . . . . . . . 481065.316441 secs . . . . . *A0 . . 481065.318703 secs . . . . . *- . . 481065.318717 secs . . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186 . . *- . . . . . 481065.320555 secs . . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654 *B0 . D0 . - . . . 481065.328527 secs *- . D0 . - . . . 481065.328535 secs . . *- . . . . . 481065.328535 secs * Fix -r/--repeat option of perf sched replay. The documentation said -1 will work as infinity but it didn't accept the value. Update the code and document to use 0 instead. * Fix perf sched timehist to account the delay time for preempted tasks. Perf event filtering -------------------- * perf top gained filtering support on regular events using BPF like perf record. Previously it was able to use it for tracepoints only. * The BPF filter now supports filtering by UID/GID. This should be preferred than -u <UID> option as it's racy to scan /proc to check tasks for the user and fails to open an event for the task if it's already gone. $ sudo perf top -e cycles --filter "uid == $(id -u)" perf report ----------- * Skip dummy events in the group output by default. The --skip-empty option controls display of empty events without samples. But perf report can force display all events in a group. In this case, auto- added a dummy event (for a system-wide record) ends up in the output. Now it can skip those empty events even in the group display mode. To preserve the old behavior, run this: $ perf report --group --no-skip-empty perf stat --------- * Choose the most disaggregate option when multiple aggregation options are given. It used to pick the last option in the command line but it can be confusing and not consistent. Now it'll choose the smallest unit. For example, it'd aggregate the result per-core when the user gave both --per-socket and --per-core options at the same time. Internals --------- * Fix `perf bench` when some CPUs are offline. * Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map patterns only so that it can not be confused by other /tmp/perf-* files. * Many improvements and fixes for `perf test`. Others ------ * Support some new instructions for Intel-PT. * Fix syscall ID mapping in perf trace. * Document AMD IBS PMU usages. * Change `perf lock info` to show map and thread info by default. Vendor JSON events ------------------ * Update Intel events and metrics * Add i.MX9[35] DDR metrics Signed-off-by: Namhyung Kim <namhyung@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZpbe+QAKCRCMstVUGiXM g4X6AQCXJ+eCuBy/9IvDpo86KjemPQk/brA0X8Ufi7JCd+Vj4QD7BvDobClewn+v W3MhNQwIlFPJ8u3Act+tJZfUJjVF4wU= =ZkPv -----END PGP SIGNATURE----- Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Namhyung Kim: "Build: - Build each directory as a library so that depedency check for the python extension module can be automatic - Use pkg-config to check libtraceevent and libtracefs perf sched: - Add --task-name and --fuzzy-name options for `perf sched map` It focuses on selected tasks only by removing unrelated tasks in the output. It matches the task comm with the given string and the --fuzzy-name option allows the partial matching: $ sudo perf sched record -a sleep 1 $ sudo perf sched map --task-name kworker --fuzzy-name . . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521 . . . . - *- . . 481065.315160 secs *B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860 *- . . . . . . . 481065.316441 secs . . . . . *A0 . . 481065.318703 secs . . . . . *- . . 481065.318717 secs . . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186 . . *- . . . . . 481065.320555 secs . . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654 *B0 . D0 . - . . . 481065.328527 secs *- . D0 . - . . . 481065.328535 secs . . *- . . . . . 481065.328535 secs - Fix -r/--repeat option of perf sched replay The documentation said -1 will work as infinity but it didn't accept the value. Update the code and document to use 0 instead - Fix perf sched timehist to account the delay time for preempted tasks Perf event filtering: - perf top gained filtering support on regular events using BPF like perf record. Previously it was able to use it for tracepoints only - The BPF filter now supports filtering by UID/GID. This should be preferred than -u <UID> option as it's racy to scan /proc to check tasks for the user and fails to open an event for the task if it's already gone $ sudo perf top -e cycles --filter "uid == $(id -u)" perf report: - Skip dummy events in the group output by default. The --skip-empty option controls display of empty events without samples. But perf report can force display all events in a group In this case, auto-added a dummy event (for a system-wide record) ends up in the output. Now it can skip those empty events even in the group display mode To preserve the old behavior, run this: $ perf report --group --no-skip-empty perf stat: - Choose the most disaggregate option when multiple aggregation options are given. It used to pick the last option in the command line but it can be confusing and not consistent. Now it'll choose the smallest unit For example, it'd aggregate the result per-core when the user gave both --per-socket and --per-core options at the same time Internals: - Fix `perf bench` when some CPUs are offline - Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map patterns only so that it can not be confused by other /tmp/perf-* files - Many improvements and fixes for `perf test` Others: - Support some new instructions for Intel-PT - Fix syscall ID mapping in perf trace - Document AMD IBS PMU usages - Change `perf lock info` to show map and thread info by default Vendor JSON events: - Update Intel events and metrics - Add i.MX9[35] DDR metrics" * tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits) perf trace: Fix iteration of syscall ids in syscalltbl->entries perf dso: Fix address sanitizer build perf mem: Warn if memory events are not supported on all CPUs perf arm-spe: Support multiple Arm SPE PMUs perf build x86: Fix SC2034 error in syscalltbl.sh perf record: Fix memset out-of-range error perf sched map: Add --fuzzy-name option for fuzzy matching in task names perf sched map: Add support for multiple task names using CSV perf sched map: Add task-name option to filter the output map perf build: Conditionally add feature check flags for libtrace{event,fs} perf install: Don't propagate subdir to Documentation submake perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics perf dsos: When adding a dso into sorted dsos maintain the sort order perf comm str: Avoid sort during insert perf report: Calling available function for stats printing perf intel-pt: Fix exclude_guest setting perf intel-pt: Fix aux_watermark calculation for 64-bit size perf sched replay: Fix -r/--repeat command line option for infinity perf: pmus: Remove unneeded semicolon ... |
||
|
Linus Torvalds
|
1777e471e1 |
tracing/tools: Trivial updates for 6.11
- Use pretty formatting only on interactive tty in rtla/osnoise - Better reporting when histogram is empty in rtla/osnoise - Use the correct library name for "libtracefs" in feature detection -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbYbRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qpWSAQD69Ea2bOCRuqCW6mjH4iPgWA3Re4Xt rnUI3mWT7+FSNwD/T1ElUQ8/mfJptawZl1KyACNovtE1xMn365yHsFA2Mgg= =fnCa -----END PGP SIGNATURE----- Merge tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing tools updates from Steven Rostedt: "Trivial updates for 6.11: - Use pretty formatting only on interactive tty in rtla/osnoise - Better reporting when histogram is empty in rtla/osnoise - Use the correct library name for "libtracefs" in feature detection" * tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools: build: use correct lib name for libtracefs feature detection rtla/osnoise: Better report when histogram is empty rtla/osnoise: Use pretty formatting only on interactive tty |
||
|
Linus Torvalds
|
70045bfc4c |
ftrace: Rewrite of function graph tracer
Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT 7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8= =umuf -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ... |
||
|
Linus Torvalds
|
91bd008d4e |
Probes updates for v6.11:
Uprobes:
- x86/shstk: Make return uprobe work with shadow stack.
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster. This
syscall is automatically used from user-space trampolines which are
generated by the uretprobe. If this syscall is used by normal
user program, it will cause SIGILL. Note that this is currently only
implemented on x86_64.
(This also has 2 fixes for adjusting the syscall number to avoid conflict
with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending uretprobe.
This corrects the uretprobe's trampoline address in the stacktrace with
correct return address.
- selftests/x86: Add a return uprobe with shadow stack test.
- selftests/bpf: Add uretprobe syscall related tests.
. test case for register integrity check.
. test case with register changing case.
. test case for uretprobe syscall without uprobes (expected to be failed).
. test case for uretprobe with shadow stack.
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but to
clarify who maintains and reviews the uprobes.
Kprobes:
- tracing/kprobes: Test case cleanups. Replace redundant WARN_ON_ONCE() +
pr_warn() with WARN_ONCE() and remove unnecessary code from selftest.
- tracing/kprobes: Add symbol counting check when module loads. This
checks the uniqueness of the probed symbol on modules. The same check
has already done for kernel symbols.
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWYxwbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bsUgH/3JcSzDZujQWCZ1f4fJn
QecvTFSYcCl6ck8+/3wm4EsgeCXIFOyPnoPc7k2Gm+l6Dlk1DKGV6wV4tuKFUq9X
9mplcwoVA0Ln+EX9zv9v4s99yUGxcU9xjgC9XT7J52SvqYncPIi6dR0Z9wlJBmyd
Bx3cZk+wSzCYaoqYngI2fKlzsEcYgDIP999fQPRi0HGzNZujc4xeJyjCTC/48yWO
9kreRQq6wFdgRQTwMcR/fKPDKIGZQCU8jkXv5crVV5K3rNaBcwBmCJJMP8PzPU0V
UQ0+8RZK+Qk8SBwXcMNVRqm/efTderob4IYxP8OBe5wjAIE7+vu8r6sqwxRIS54M
Cyg=
=DRSr
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
|
||
Mark Brown
|
4594d26fca |
kselftest/alsa: Log the PCM ID in pcm-test
Drivers report a string with a name for each PCM, log it during startup of pcm-test as a diagnostic aid. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-2-60f1acdde096@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Mark Brown
|
b1a7b97aa5 |
kselftest/alsa: Use card name rather than number in test names
Currently for the PCM and mixer tests we report test names which identify the card being tested with the card number. This ensures we have unique names but since card numbers are dynamically assigned at runtime the names we end up with will often not be stable on systems with multiple cards especially where those cards are provided by separate modules loeaded at runtime. This makes it difficult for automated systems and UIs to relate test results between runs on affected platforms. Address this by replacing our use of card numbers with card names which are more likely to be stable across runs. We use the card ID since it is guaranteed to be unique by default, unlike the long name. There is still some vulnerability to ordering issues if multiple cards with the same base ID are present in the system but have separate dependencies but not all drivers put distinguishing information in their long names. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-1-60f1acdde096@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Paolo Abeni
|
a1b7dbca14 |
netfilter pull request 24-07-17
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmaYOsUACgkQ1V2XiooU IOSZfhAAiylt0bXfNLh2dGFpigNqejO0y7uJG/lNALA6kbhqkfdaXyiEGI+ZyIUM qtkpk0BUDEhCtpspOVLNtDYcZkKuH7zzt6MsA9BcNm/5AS4XPB56buPsZ94ic3Uk LZB8X/+q+gT+HC3RF4hf92rfJP6WKvt3mO8GGLstg0r6orGX6DywfwD+jCAIS/HS CgDot0SXS0MQZpTUoMugRpGF8wWBANLjUvLYNjIQhV5vLpRvX/Fal+St1+AsFnzq hdtMDOmqJHy0GNwrOdWX5muK+3X5Fg1rHUIgA1SqALd52lpsv62U9JHN6cvV8nqG h24u3v17rtHg82zbKz4pBVHwurDyIT3TM3Pmp8v+b8ZnYmWsyXLr3lqv3GU5Rx14 HWsEi+FL/ND2mfWF+GOn4JqkWy/97eZ78VkekuuWXfzuNAXedp7OUw7RgfhCl5Pr DZPus0rrnl3nCOeQyXGpo0RacFDOhKESa0EBjHS0+S8nv4vpzS+5XbiZctM0FlSu QhwZM2Q+M6Klr0LWkLYyS99s5Cra3z5z/Oud7xtnlBOp81r0O9YVBYopoV6MM0kV b6IHvOvs+5W+dj8RmH6Chq9D+EmFuYGwPoa5uv6zdSn/2ZeXqKeGq/HnlXuqct37 RCbuV8S1IzJi5EgtwbU0uxBclKkiyCtkhqSNrdjSHxLwf7wgI2s= =I/g9 -----END PGP SIGNATURE----- Merge tag 'nf-24-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for net: 1) Call nf_expect_get_id() to delete expectation by ID. By trial and error it is possible to leak the LSB of the expectation address on x86_64. This bug is a leftover when converting the existing code to use nf_expect_get_id(). 2) Incorrect initialization in pipapo set backend leads to packet mismatches. From Florian Westphal. 3) Extend netfilter's selftests to cover for the pipapo set backend, also from Florian. 4) Fix sparse warning in IPVS when adding service, from Chen Hanxiao. netfilter pull request 24-07-17 * tag 'nf-24-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: ipvs: properly dereference pe in ip_vs_add_service selftests: netfilter: add test case for recent mismatch bug netfilter: nf_set_pipapo: fix initial map fill netfilter: ctnetlink: use helper function to calculate expect ID ==================== Link: https://patch.msgid.link/20240717215214.225394-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Ido Schimmel
|
f036e68212 |
ipv4: Fix incorrect TOS in fibmatch route get reply
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes:
|
||
|
Linus Torvalds
|
6e504d2c61 |
for-linus-2024071601
-----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmaWVnITHGJlbnRpc3NA a2VybmVsLm9yZwAKCRDsxfBeGdlKNvC2D/0ZkIRcJn8OU3j8vbSE2D10hy3tyDZa 3P5rI2UrlE6NPlJUo755VBEaLe608481TNZlhIKQ6LFzmUdlj3C7bKiCOQ6KLOyT ZoCeRS3cVgNfSEnF5N6SwfuVW3PgXo6GC6pueNcNepLIVnWGJ5QhLmiLOzPr0YER mW/y3s447TxecQ803UYtaFQnwSOhxzWvN+G7mnzkz2PNpta3UJ68jsqxQOivrSV0 mEx4W5VN6MYaSVZ2c5s+LIcn48+LMGNwkRAdMkFUAksLDNwvSIgdgRcjaJhpVIPK MfYrQ9QAXezFxzUxbEoCI5PXOA44MODhT3095fyq+Uf3r2OB/gGKE8p3f2jv24nv RR/TR5S4y8FD+bWh12/BL8j4bv0weXFFUjwJwZmmpXnL3ev0oN92TaRrKRPuNO4Y GDmRV5qwUZrL2+e7j0bpXFGxulsxc+1JYxb8UY03BHIB2M8LnUTpsfpcxtSi1MYW N1U//fObXBfRl1CcdDPbT2cTJD9jwuozJm5l1p/BHOHu3cwhJTStH1XzsnKQXL9g O5izXWqwCgNmbG8egGR3ddV53ZGi1MsD7tGcc5GGcYnevdBi4l+Q4Zl+oFxjfHvs MKWMKygdaHUBqmYfOGgspA+S2zY38smbul8ZQUxP0yOl3+MyqCCedYQHi/w8MU+L k2w+NzXIWXBifA== =hVVT -----END PGP SIGNATURE----- Merge tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - rewrite of the HID-BPF internal implementation to use bpf struct_ops instead of a tracing endpoint (Benjamin Tissoires) - add two new HID-BPF hooks to be able to intercept userspace calls targeting a HID device and filtering them (Benjamin Tissoires) - add support for various new devices through HID-BPF filters (Benjamin Tissoires) - add support for the magic keyboard backlight (Orlando Chamberlain) - add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff Johnson) - use of kvzalloc in case memory gets too fragmented (Hailong Liu) - retrieve the device firmware node in the child HID device (Danny Kaehn) - some hid-uclogic improvements (José Expósito) - some more typos, trivial fixes, kernel doctext and unused functions cleanups * tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits) HID: hid-steam: Fix typo in goto label HID: mcp2221: Remove unnecessary semicolon HID: Fix spelling mistakes "Kensigton" -> "Kensington" HID: add more missing MODULE_DESCRIPTION() macros HID: samples: fix the 2 struct_ops definitions HID: fix for amples in for-6.11/bpf HID: apple: Add support for magic keyboard backlight on T2 Macs HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix HID: bpf: Add Huion Dial 2 bpf fixup HID: bpf: Add support for the XP-PEN Deco Mini 4 HID: bpf: move the BIT() macro to hid_bpf_helpers.h HID: bpf: add a driver for the Huion Inspiroy 2S (H641P) HID: bpf: Add a HID report composition helper macros HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: fix gcc warning and unify __u64 into u64 selftests/hid: ensure CKI can compile our new tests on old kernels selftests/hid: add an infinite loop test for hid_bpf_try_input_report selftests/hid: add another test for injecting an event from an event hook HID: bpf: allow hid_device_event hooks to inject input reports on self ... |
||
|
Linus Torvalds
|
a5cb6b2bbf |
platform-drivers-x86 for v6.11-1
Highlights: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements The following is an automated shortlog grouped by driver: amd/pmf: - Remove update system state document - Use existing input event codes to update system states - Use memdup_user() arm64: - add Lenovo Yoga C630 WOS EC driver - build drivers even on non-ARM64 platforms - EC_ACER_ASPIRE1 should depend on ARCH_QCOM - EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM arm64: lenovo-yoga-c630: - select AUXILIARY_BUS asus-tf103c-dock: - Use 2-argument strscpy() asus-wmi: - fix TUF laptop RGB variant - support the disable camera LED on F10 of Zenbook 2023 dell-pc: - avoid double free and invalid unregistration - Implement platform_profile dell-smbios: - Add helper for checking supported class - Move request functions for reuse Docs/admin-guide: - Remove pmf leftover reference from the index doc: TPMI: - Add entry for Performance Limit Reasons dt-bindings: platform: - Add Lenovo Yoga C630 EC hp: hp-bioscfg: - Use 2-argument strscpy() hp-wmi: - Fix implementation of the platform_profile_omen_get function - Fix platform profile option switch bug on Omen and Victus laptops ideapad-laptop: - use cleanup.h intel: chtwc_int33fe: - Use 2-argument strscpy() intel/ifs: - Switch to new Intel CPU model defines intel_ips: - Switch to new Intel CPU model defines intel/pmc: - Add support to show ltr_ignore value - Add support to undo ltr_ignore - Convert index variables to be unsigned - Move pmc assignment closer to first usage - Remove unneeded min_t check - Simplify mutex usage with cleanup helpers - Switch to new Intel CPU model defines - Use DEFINE_SHOW_STORE_ATTRIBUTE macro - Use the Elvis operator - Use the return value of pmc_core_send_msg intel_scu_wdt: - Switch to new Intel CPU model defines intel_speed_select_if: - Switch to new Intel CPU model defines intel_telemetry: - Switch to new Intel CPU model defines intel/tpmi: - Add API to get debugfs root - Add new auxiliary driver for performance limits - Add support for performance limit reasons intel: - TPMI domain id and CPU mapping intel/tpmi/plr: - Add support for the plr mailbox - Fix output in plr_print_bits() intel_turbo_max_3: - Switch to new Intel CPU model defines intel-uncore-freq: - Get rid of magic min_max argument - Get rid of magic values - Get rid of uncore_read_freq driver API - Re-arrange bit masks - Rename the sysfs helper macro names - Switch to new Intel CPU model defines - Use generic helpers for current frequency - Use uncore_index with read_control_freq ISST: - Add model specific loading for common module - Avoid some SkyLake server models - Use only TPMI interface when present p2sb: - Switch to new Intel CPU model defines serial-multi-instantiate: - Use 2-argument strscpy() think-lmi: - Use 2-argument strscpy() thinkpad_acpi: - Use 2-argument strscpy() tools/power/x86/intel-speed-select: - Set TRL MSR in 100 MHz units - v1.20 release wmi: - Add bus ABI documentation - Add driver_override support x86/platform/atom: - Switch to new Intel CPU model defines Merges: - Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo - Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo - Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo - Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZpZIdQAKCRBZrE9hU+XO MbIEAQCMVjDuOJSSuS2u7/iVb41Q3+kjP6X0CmSpf8dmt3rH0gD/Z9Qynw6ArRY4 PPHY25ur8kPtwtyxHfCMcar6ESpztwU= =L2LD -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: asus-wmi: fix TUF laptop RGB variant platform/x86/intel/tpmi/plr: Fix output in plr_print_bits() Docs/admin-guide: Remove pmf leftover reference from the index platform/x86: ideapad-laptop: use cleanup.h platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM platform/x86/amd/pmf: Remove update system state document platform/x86/amd/pmf: Use existing input event codes to update system states platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops platform/x86:intel/pmc: Add support to undo ltr_ignore platform/x86:intel/pmc: Use the Elvis operator platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro platform/x86:intel/pmc: Remove unneeded min_t check platform/x86:intel/pmc: Add support to show ltr_ignore value platform/x86:intel/pmc: Move pmc assignment closer to first usage platform/x86:intel/pmc: Convert index variables to be unsigned platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers platform/x86:intel/pmc: Use the return value of pmc_core_send_msg tools/power/x86/intel-speed-select: v1.20 release ... |
||
Florian Westphal
|
0935ee6032 |
selftests: netfilter: add test case for recent mismatch bug
Without 'netfilter: nf_set_pipapo: fix initial map fill' this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 1s [ OK ]
net,port,proto 1s [FAIL]
post-add: should have returned 10.5.8.0/24 . 51-60 . 6-17 but got table inet filter {
set test {
type ipv4_addr . inet_service . inet_proto
flags interval,timeout
elements = { 10.5.7.0/24 . 51-60 . 6-17 }
}
}
The other sets defined in the selftest do not trigger this bug, it only
occurs if the first field group bitsize is smaller than the largest
group bitsize.
For each added element, check 'get' works and actually returns the
requested range.
After map has been filled, check all added ranges can still be
retrieved.
For each deleted element, check that 'get' fails.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
0434dbe320 |
linux_kselftest-next-6.11-rc1
This kselftest next update for Linux 6.11-rc1 consists of:
-- changes to resctrl test to cleanup resctrl_val() and
generalize it by removing test name specific handling
from the function.
-- several clang build failure fixes to framework and tests
-- adds tests to verify IFS (In Field Scan) driver functionality
-- cleanups to remove unused variables and document changes
-----BEGIN PGP SIGNATURE-----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=3vp1
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- change resctrl test to cleanup resctrl_val() and generalize it by
removing test name specific handling from the function.
- several clang build failure fixes to framework and tests
- add tests to verify IFS (In Field Scan) driver functionality
- cleanups to remove unused variables and document changes
* tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits)
selftests: ifs: verify IFS ARRAY BIST functionality
selftests: ifs: verify IFS scan test functionality
selftests: ifs: verify test image loading functionality
selftests: ifs: verify test interfaces are created by the driver
selftests/dma:remove unused variable
selftests/breakpoints:Remove unused variable
selftests/x86: fix printk warnings reported by clang
selftests/x86: remove (or use) unused variables and functions
selftests/x86: avoid -no-pie warnings from clang during compilation
selftests/x86: build sysret_rip.c with clang
selftests/x86: build fsgsbase_restore.c with clang
selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp
selftests/x86: fix Makefile dependencies to work with clang
selftests/timers: remove unused irqcount variable
selftests: Add information about TAP conformance in tests
selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl()
selftests/resctrl: Remove mongrp from CMT test
selftests/resctrl: Remove mongrp from MBA test
selftests/resctrl: Convert ctrlgrp & mongrp to pointers
selftests/resctrl: Make some strings passed to resctrlfs functions const
...
|
||
|
Linus Torvalds
|
0c182ac2eb |
Objtool changes for v6.11:
- Fix bug that caused objtool to confuse certain memory ops
added by KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RwK9
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Fix bug that caused objtool to confuse certain memory ops added by
KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
* tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: objtool can confuse memory and stack access
objtool: Use "action" in error message to be consistent with help
scripts/faddr2line: Check only two symbols when calculating symbol size
scripts/faddr2line: Remove call to addr2line from find_dir_prefix()
scripts/faddr2line: Invoke addr2line as a single long-running process
scripts/faddr2line: Pass --addresses argument to addr2line
scripts/faddr2line: Check vmlinux only once
scripts/faddr2line: Combine three readelf calls into one
scripts/faddr2line: Reduce number of readelf calls to three
|
||
|
Linus Torvalds
|
41906248d0 |
Power management updates for 6.11-rc1
- Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Add support for the Arrow Lake and Lunar Lake platforms and
the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada).
- Switch cpufreq to new Intel CPU model defines (Tony Luck).
- Simplify the cpufreq driver interface by switching the .exit() driver
callback to the void return data type (Lizhe, Viresh Kumar).
- Make cpufreq_boost_enabled() return bool (Dhruva Gole).
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du).
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin).
- Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem
cpufreq drivers (Javier Carrasco).
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou).
- Fix deferred probe handling in the TI cpufreq driver and wrong return
values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and
AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser).
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona).
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado).
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li).
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu).
- Improve the teo cpuidle governor and clean up leftover comments from
the menu cpuidle governor (Christian Loehle).
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant).
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson).
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck).
- Switch the Intel RAPL driver new Intel CPU model defines (Tony Luck).
- Simplify if condition in the idle_inject driver (Thorsten Blum).
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar).
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson).
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt).
- Address several assorted issues in the cpupower utility (Roman
Storozhenko).
-----BEGIN PGP SIGNATURE-----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=imBx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
||
|
Linus Torvalds
|
ce5a51bfac |
hardening updates for v6.11-rc1
- lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVT2IACgkQiXL039xt wCbq8A//RhxTdr+l/h2gyMy/Lcy/NMR9KEWklnxdftuM1V1Kzr53yeH/g6Ehw69g e8Ag3Sp7Fn4rNBVa+tY6RqzKwfrUHIbeewGI4LkRe19NDWFWc/Od+4tamfRSPf9c GL9ZnJZviRm3zByetwr4CbS69HocXFFSSgcpIv/7xOd+haSWWdvEc3KcSnavY/aq 8wQPkZxzy8ESkOajZj2k0E2l9JP42Ex20qy0KcjweSSYVafKmbTxhKZgriwAKMCD Yj2m55fbD6D08vd0Y6S7H4TPilYtRbulXR9FNMtw59UpKeoUceEmyn4B43psDvau 9XuJF/oFKrXBEJG+OUZogNu5L6uYUaNdYdtb43upu9lCsjrAjmMYfmXDHO2E40V8 76MikxHtyFAPEzUwg/BH2CGUu9hil+FADd28s8zLuUBpRDitgYudQD+Cqrc34b6s QlAX19bX7KFgXqlsdwy6zJNSd3dpoMBVsP58/EhQQfiqv/ZU2TOryZenz0URlH+k ZCAbpXYRAzTyGz23qkutRO+6MiKXoheE7gmd9jESiaqyXe2Q6mIMPyoFU50458TH xXhXbZc7War8vbJLyWF7fvK/GlooTHu4xOxfNTsxKWiYShI01iiwG1hH+j4ZDVOG NBBK2AfX9GM8AOHJolp5EaGmon0AoVsxbRANSs1K4qZ93WTNGLk= =LoG2 -----END PGP SIGNATURE----- Merge tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations * tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randomize_kstack: Improve stack alignment codegen ARM: Remove address checking for MMUless devices gcc-plugins: Remove duplicate included header file stringpool.h randomize_kstack: Remove non-functional per-arch entropy filtering fortify: Do not special-case 0-sized destinations x86/alternatives: Make FineIBT mode Kconfig selectable lkdtm/bugs: add test for hung smp_call_function_single() |
||
|
Linus Torvalds
|
1ca995edf8 |
seccomp updates for v6.11-rc1
- interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin) - Update selftests to check for expected NOTIF_RECV exits (Andrei Vagin) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVTOkACgkQiXL039xt wCayUA//fJTZUq+idihdKMql9SEwYh0uIJQpGOxxBEesUksZUM4alTCswzmheLFL q9BxlWWJJfUsp3djeZK+0vnDv3izaR+LfA1JPEJf64ImbympbEenVXK0ZkmVrTqg bNAlD5c/LVpzYtB7cnOaglq18uUja6/E+EQvNYz5NLHrIhYYCieJZIiFATkHQ9Lj 3Wq3g9FWEa5pZxpKbEI3UA2HllADnmHeb/Z78Zdvyue5lOOvsBIheQfL4m0pW38x xgBWNglIg7b+X+YgwYSv8w50Lhn4SJVtIynWnwzBz19qFJRQL7oJRj1zyFHZPCwZ ajHVIj5LOuts/BYxSiGzczxVqZaAqeOyCY5e8G+Mjk5ZD5kLYznbbcrIFIUIaHpx rpRD/TVVwJ3PHsOIpWHwrXKgoKnbe/0n8lJT+Ehnm/2lLrlGyZj9hLyl6/+JsizE dGIWgE2emykYI+52IRRYSZaw4hLb+CU52d1vd5a35wUk1ie5fcVGZAWnaul23x0I maQtXcyB6tYuhX3oPnxoxFVqGvCKGi3Tc5N+Vg4JR/RzTy2H7fZ02DRZq8Vs0QST EgO3cpCD3035qxkK6ivaV4ebPJjkL158D/+uFyne+PWQlSfrmXJvhfggPFA+Oqtb y8PTUV73+HxDiruXbGZ7MD8C7d+ZvGI/D+xheohYrijhivcXxcc= =tlFN -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: - interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin) - Update selftests to check for expected NOTIF_RECV exits (Andrei Vagin) * tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: check that a zombie leader doesn't affect others selftests/seccomp: add test for NOTIF_RECV and unused filters seccomp: release task filters when the task exits seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited |
||
|
Linus Torvalds
|
72fda6c8e5 |
execve updates for v6.11-rc1
- Use value of kernel.randomize_va_space once per exec (Alexey Dobriyan) - Honor PT_LOAD alignment for static PIE - Make bprm->argmin only visible under CONFIG_MMU - Add KUnit testing of bprm_stack_limits() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVTFAACgkQiXL039xt wCYyZw//ZcPV2hu48WqqOImL8LI9HIUaZqKQpixGQRD5VcTRb5MKg8g3Wi4EBHz+ Kg6QvTEOQdg6NbfE9fH8VIIwcp3dAxdWN6g+3A0HHDSRdb8Ye1ucnzB2kgmEkM1l huBRn5tnoS0vn2fxafu1O5tj330kKAvTsemsy316cxmbKNs7ckHdfwuVgZHcuyEt OrOA3ZSTWwjkSiA9tatsi5iAQ34tQYGwDEosf06avlnPkQqsRzn3wNlohAPjQF6V kjRfX/Mxz2EHa0mjXy2OkhNyPSn6wu0OcmF0ympySHzxm726uRggG+olT5ziUc+2 DW6Gz6TJ1P8Gu+uTEoz6AY+l5Bpo9ZLYSBm+Mp88sxAT6+Xcc68XeZsFZHmefJzs 6g6EdmwhDEP/Xd3sIsNphdkS5q1RMgc7tdAtyK8GCaACsHUlU4CfzRYh2mWxpIg6 hA7oM5KF9FuToLtaIS6K/yYQIVsTKAaA7t+5K/a1RUyKzcJ0O7UpMx1oEge2sPEK RnETCYhQs0Cxm11iJ/eqEFzWm0Puxjsjz/P/j5H5U8usx9VUoz0HuS91fNEIY3S9 y7bn09wxuUv4QddKYgltkurxCCB//Nv7jPYo96pKIW3T56XkfsrYLvNH2W95cCNz OMvZImA1J/vQubSODrgeQsfMRsaJodHU3acWyYQ90HmmoWx4JS4= =bO7x -----END PGP SIGNATURE----- Merge tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Use value of kernel.randomize_va_space once per exec (Alexey Dobriyan) - Honor PT_LOAD alignment for static PIE - Make bprm->argmin only visible under CONFIG_MMU - Add KUnit testing of bprm_stack_limits() * tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Avoid pathological argc, envc, and bprm->p values execve: Keep bprm->argmin behind CONFIG_MMU ELF: fix kernel.randomize_va_space double read exec: Add KUnit test for bprm_stack_limits() binfmt_elf: Honor PT_LOAD alignment for static PIE binfmt_elf: Calculate total_size earlier selftests/exec: Build both static and non-static load_address tests |
||
|
Linus Torvalds
|
d80f2996b8 |
asm-generic updates for 6.11
Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVB1cACgkQYKtH/8kJ UicMqxAAnYKOxfjoMIhYYK6bl126wg/vIcDcjIR9cNWH21Nhn3qxn11ZXau3S7xv 3l/HreEhyEQr4gC2a70IlXyHUadYOlrk+83OURrunWk1oKPmZlMKcfPVbtp8GL7x PUNXQfwM1XZLveKwufY24hoZdwKC+Y/5WLc1t0ReznJuAqgeO2rM9W5dnV5bAfCp he3F5hFcr196Dz3/GJjJIWrY+cbwfmZWsNtj1vFTL5/r/LuCu8HTkqhsGj8tE5BJ NGVEEXbp5eaVTCIGqJWhnuZcsnKN9kM51M7CtdwWf8OTckUVuJap5OsDVKQkWkGl bLPbd2jhDltph0sah51hAIvv4WdkThW76u9FRW7KR3fo7ra67eF7l5j7wc1lE2JB GwLJ1X56Bxe1GhvvNTlDmb7DrnlP/DMPuRv3Z6xyH6l8iZ2pMGlnAxuw6Bs1s6Y5 WSs36ZpnS0ctgjfx37ZITsZSvbKFPpQFJP4siwS8aRNv/NFALNNdFyOCY5lNzspZ 0dxwjn6/7UpHE4MKh6/hvCg2QwupXXBTRytibw+75/rOsR+EYlmtuONtyq2sLUHe ktJ5pg+8XuZm27+wLffuluzmY7sv2F8OU4cTYeM60Ynmc6pRzwUY6/VhG52S1/mU Ua4VgYIpzOtlLrYmz5QTWIZpdSFSVbIc/3pLriD6hn4Mvg+BwdA= =XOhL -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl |
||
|
Linus Torvalds
|
2439a5eaa7 |
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
-----BEGIN PGP SIGNATURE-----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=AP9P
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
||
|
Linus Torvalds
|
222dfb8326 |
- Make error checking of AMD SMN accesses more robust in the callers as
they're the only ones who can interpret the results properly - The usual cleanups and fixes, left and right -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaVOU0ACgkQEsHwGGHe VUqeFBAAl9X4bj08GwSAXfqBangXaGpKO4Nx0VZiFCYDkQ/TDnchMEBbpRWSuVzS SEnVSrcAXCxKqhv295UyFMmv2a+q3UUidkxTzRfznekMZMMylHYcfCFrg16w9ZNJ N/cBquTu96hSJHd2/usNUvNPLllTrMoIg3gofBav+NTaHQQDmzvM5htfewREY9OF SRS/86o3u5oIsRKKiJRyzfLzzX9lEGUvU+lvxv/yu1x2Q6SG0guhfM3HeaSxCIOs yeB23bwe/N/pO5KlqOtEJJL49Ypu2k/jfiS2rhH6AxSqNfXVpBlDbnahu9sA973n irzWwycJhVU4OQ3pqmPXdcKDqn7GmUWDsjrkEIOqJeBCSukmlM7APi8Ss8yGZ3X4 HgDw10c900ldrxSo0H5PdpeULvowpeptpzBY8gzcdum4s0vNUvZLy/n1AKo7ydea oJ+ZBdXvywnR66uGQLkTxLvpGTNgyFrKDORHuyOAwJTN5CbLuco2SV/82mkcQCZt sAgyiWFvIcLoHZPfY8BNztYWVX01lWDIxFHJE8ca/B97mBeZCC3w1DnHJla8Kxsg zCMV0yn61BdMvjVS9AGaKqEuN0gYYrs/QOjtOp5ggAv7QC1ke/wqgZoFGvLbmcP9 pIf8GzCt34u3tACGAl76toP0rtnMjGvKD8xXdHGHf7AAj1jKo28= =rd6Q -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Make error checking of AMD SMN accesses more robust in the callers as they're the only ones who can interpret the results properly - The usual cleanups and fixes, left and right * tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kmsan: Fix hook for unaligned accesses x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos x86/pci/xen: Fix PCIBIOS_* return code handling x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling x86/of: Return consistent error type from x86_of_pci_irq_enable() hwmon: (k10temp) Rename _data variable hwmon: (k10temp) Remove unused HAVE_TDIE() macro hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters hwmon: (k10temp) Define a helper function to read CCD temperature x86/amd_nb: Enhance SMN access error checking hwmon: (k10temp) Check return value of amd_smn_read() EDAC/amd64: Check return value of amd_smn_read() EDAC/amd64: Remove unused register accesses tools/x86/kcpuid: Add missing dir via Makefile x86, arm: Add missing license tag to syscall tables files |
||
|
Linus Torvalds
|
208c6772d3 |
- This is basically PeterZ's idea to nest the alternative macros to avoid the
need to "spell out" the number of alternates in an ALTERNATIVE_n() macro and thus have an ever-increasing complexity in those definitions. For ease of bisection, the old macros are converted to the new, nested variants in a step-by-step manner so that in case an issue is encountered during testing, one can pinpoint the place where it fails easier. Because debugging alternatives is a serious pain. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaU/+MACgkQEsHwGGHe VUpMGhAAqVbB3DZohv0Oa4BRRvaKFuQ3L7H0NTjK/pbT3EG+phol0zrHby2MnGjD HWXskps86n91QBB/06vAyZRimV/dvAPvlSKllsRx6ie3VCE4FJPzA4nTWQn/41dC HWamj78mQuSMgioLzIYdTY79KObtJcUw/X/xz+TTMemfkzkQxukKY7+Y71nZbuKi rUuCSrfAWNHQaIaoGs2JowGw7te7yNOtKQMCW5TdNLwvJfOAECuoLIFeiEcWHvoO uGl6FTABNLp26wmaeceUxdjBbTJcM3iV3joZQYED7B+mbJcU/a7tZw7I+mavPrbh Y6+EOn7rzR0wbcmj0iJ74TKr+uKDme/Qzm3YEKgGvJPj9tRjTDwxWRBnyTeCMbav NkKVwWTep8K+1qJtGVBwACY6iz89u3P8V5owD8O++KIPQa8rA0m8pN5gaU3PVYYQ D2UUdqXWIPIFoD4Sveb/WFU8OJKY+Nx7IK8KD03h5tiXW8MmGSa2e5b57gIfCLP7 DbSHyCkTiqEdBrSM4/RaVVckD6NZ39M87H+iV51vYUkCYmODa/riMj0M7SVMi5Jo S/30jvdHEzWnmDBbOsn9d1XbvB5I+zz3BrcZQ2VSyBx+Y9m+SZ9qsyMEkOWw4uKM kfFp+XlYVWSnQFo7jY3UUIgVrU9dmdX1WxNX7/2HABDjg3MtWog= =tGap -----END PGP SIGNATURE----- Merge tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 alternatives updates from Borislav Petkov: "This is basically PeterZ's idea to nest the alternative macros to avoid the need to "spell out" the number of alternates in an ALTERNATIVE_n() macro and thus have an ever-increasing complexity in those definitions. For ease of bisection, the old macros are converted to the new, nested variants in a step-by-step manner so that in case an issue is encountered during testing, one can pinpoint the place where it fails easier. Because debugging alternatives is a serious pain" * tag 'x86_alternatives_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer x86/alternative: Replace the old macros x86/alternative: Convert the asm ALTERNATIVE_3() macro x86/alternative: Convert the asm ALTERNATIVE_2() macro x86/alternative: Convert the asm ALTERNATIVE() macro x86/alternative: Convert ALTERNATIVE_3() x86/alternative: Convert ALTERNATIVE_TERNARY() x86/alternative: Convert alternative_call_2() x86/alternative: Convert alternative_call() x86/alternative: Convert alternative_io() x86/alternative: Convert alternative_input() x86/alternative: Convert alternative_2() x86/alternative: Convert alternative() x86/alternatives: Add nested alternatives macros x86/alternative: Zap alternative_ternary() |
||
|
Linus Torvalds
|
b3c0eccb48 |
gpio updates for v6.11-rc1
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more info
on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core to using
a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
hardware and driving tests of the in-kernel GPIO API from user-space over
debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with regards to
reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop tempting
people to use it
- document the preference for using pread() for reading edge events in the
sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to specify
a number of callbacks callers can use to be notified about irqs being
requested and released
-----BEGIN PGP SIGNATURE-----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=kK88
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
||
|
Linus Torvalds
|
c89d780cc1 |
arm64 updates for 6.11:
* Virtual CPU hotplug support for arm64 ACPI systems
* cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits
visible to guests
* CPU errata: expand the speculative SSBS workaround to more CPUs
* arm64 ACPI:
- acpi=nospcr option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
* GICv3, use compile-time PMR values: optimise the way regular IRQs are
masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for
a static key in fast paths by using a priority value chosen
dynamically at boot time
* arm64 perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
* arm64 kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
* arm64 Documentation update with a minor clarification on TBI
* Miscellaneous:
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos
-----BEGIN PGP SIGNATURE-----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=ob2k
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
||
|
Linus Torvalds
|
895b9b1207 |
cgroup: Changes for v6.11
- Added Michal Koutný as a maintainer. - Counters in pids.events were behaving inconsistently. pids.events made properly hierarchical and pids.events.local added. - misc.peak and misc.events.local added. - cpuset remote partition creation and cpuset.cpus.exclusive handling improved. - Code cleanups, non-critical fixes, doc updates. - for-6.10-fixes is merged in to receive two non-critical fixes that didn't trigger pull. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZpSsdw4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGSEMAQDQ5VfcRz+rW20ez5IAgyN3EKIwSbW6pY6jojgj bJtJSQD/TzA8DoRxcCvTdHcZcwJ2e2zBVcuM8NkZHfSCNiPrrgs= =5f3I -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Added Michal Koutný as a maintainer - Counters in pids.events were behaving inconsistently. pids.events made properly hierarchical and pids.events.local added - misc.peak and misc.events.local added - cpuset remote partition creation and cpuset.cpus.exclusive handling improved - Code cleanups, non-critical fixes, doc updates - for-6.10-fixes is merged in to receive two non-critical fixes that didn't trigger pull * tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits) cgroup: Add Michal Koutný as a maintainer cgroup/misc: Introduce misc.events.local cgroup/rstat: add force idle show helper cgroup: Protect css->cgroup write under css_set_lock cgroup/misc: Introduce misc.peak cgroup_misc: add kernel-doc comments for enum misc_res_type cgroup/cpuset: Prevent UAF in proc_cpuset_show() selftest/cgroup: Update test_cpuset_prs.sh to match changes cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot cgroup/cpuset: Fix remote root partition creation problem cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit() cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files selftests: cgroup: Add basic tests for pids controller selftests: cgroup: Lexicographic order in Makefile cgroup/pids: Add pids.events.local cgroup/pids: Make event counters hierarchical ... |
||
|
Linus Torvalds
|
f97b956b63 |
nolibc updates for v6.11
o Fix selftest printf format mismatch in expect_str_buf_eq().
o Stop using brk() and sbrk() when testing against musl, which
implements these two functions with ENOMEM.
o Make tests use -Werror to force failure on compiler warnings.
o Add limits for the {u,}intmax_t, ulong and {u,}llong types.
o Implement strtol() and friends.
o Add facility to skip nolibc-specific tests when running against
non-nolibc libraries.
o Implement strerror().
o Also use strerror() on nolibc when running kselftests.
-----BEGIN PGP SIGNATURE-----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=ch3B
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2024.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Fix selftest printf format mismatch in expect_str_buf_eq()
- Stop using brk() and sbrk() when testing against musl, which
implements these two functions with ENOMEM
- Make tests use -Werror to force failure on compiler warnings
- Add limits for the {u,}intmax_t, ulong and {u,}llong types
- Implement strtol() and friends
- Add facility to skip nolibc-specific tests when running against
non-nolibc libraries
- Implement strerror()
- Also use strerror() on nolibc when running kselftests
* tag 'nolibc.2024.07.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests: kselftest: also use strerror() on nolibc
tools/nolibc: implement strerror()
selftests/nolibc: introduce condition to run tests only on nolibc
tools/nolibc: implement strtol() and friends
tools/nolibc: add limits for {u,}intmax_t, ulong and {u,}llong
selftests/nolibc: run-tests.sh: use -Werror by default
selftests/nolibc: disable brk()/sbrk() tests on musl
selftests/nolibc: fix printf format mismatch in expect_str_buf_eq()
|
||
|
Linus Torvalds
|
e4b2b0b1e4 |
kcsan: Add __data_racy documentation and module description
This series contains on commit that improves the documentation for the new __data_racy type qualifier to the data_race() macro's kernel-doc header and to the LKMM's access-marking documentation. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmaRubITHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jLWlD/99wMLUIfPh1cvWVVyhv8tytWuLJn6y olwukg9pOCz6WGucECfjAC2kFivSQYxS3b54K697tF4hnABEtpsx7ozkv11kgyR8 niHNv4P+L+0J7CnM/g7gkLrAGosdo+PF7rUhX3u3kpeasVjJ5NyK379jUeTjrDrc ia34vjbVVNdJ5v0c4ITxbbV/NKecbsadRSqDLzjtNrFPkwo/yfFCrz8ddztadsTd 4jftt/L4Up51QQ8NAgiHsHdp+iY/FRjwd/QtvEXSVUZ38sGseH+eNqn4hMuyTnka cjnHwAlTbEfAuR3Mdcz25ToiaI6qNxptvvM7E9+LtHuBhI+h6vEvdvPMmSFo48Rv kzdPix39O5dqpu49nz/Qsmmr/AWn9i3M5oht62YMJ5twoutDFAcc5MMppPT6sNsX Kq3fn8fjRvdHqgE3jBYOgDDWEZuTxdtcdv8wKfplID/SgyjXL48fghMEl62b2O1d X6PrHhKARk7RKMndAPk0UNz4m8T5oDmKu9Z9mF8UidjeZjYU0tVYPAoN1H/9lVdH Kn2DoTW5Oz2A21z37r5SGAro0QBE50ZMYA+xH+Ab3fyfFcd4l4ia/wu06c3AVJFc DqgKJ7f3YQ7tHGLf0AEpO6o/nNZGxwDHJ5Pjbteu2RwbCcUHmUtKxrM+McPXTvuv MjW/IAvvPdMxCw== =r0/X -----END PGP SIGNATURE----- Merge tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull KCSAN updates from Paul McKenney: - improve the documentation for the new __data_racy type qualifier to the data_race() macro's kernel-doc header and to the LKMM's access-marking documentation - add missing MODULE_DESCRIPTION * tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: kcsan: Add missing MODULE_DESCRIPTION() macro kcsan: Add example to data_race() kerneldoc header |
||
|
Linus Torvalds
|
9855e87328 |
RCU pull request for v6.11
doc.2024.06.06a: Update Tasks RCU and Tasks Rude RCU description in Requirements.rst and clarify rcu_assign_pointer() and rcu_dereference() ordering properties. fixes.2024.07.04a: Add lockdep assertions for RCU readers, limit inline wakeups for callback-bypass synchronize_rcu(), add an rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add Uladzislau Rezki as RCU maintainer, and fix a subtle callback-migration memory-ordering issue. mb.2024.06.28a: Remove a number of redundant memory barriers. nocb.2024.06.03a: Remove unnecessary bypass-list lock-contention mitigation, use parking API instead of open-coded ad-hoc equivalent, and upgrade obsolete comments. rcu-tasks.2024.06.06a: Revert avoidance of a deadlock that can no longer occur and properly synchronize Tasks Trace RCU checking of runqueues. rcutorture.2024.06.06a: Add tests for handling of double-call_rcu() bug, add missing MODULE_DESCRIPTION, and add a script that histograms the number of calls to RCU updaters. srcu.2024.06.18a: Fill out SRCU polled-grace-period API. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmaR7/QTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jGwAEACJKef2LryG6khoJdorWbvRf1V2k23H 19CxXexCE4UoGsgGST9z1/5rM8kBdNhdhQ0JB9CitW+zGlXpOM79/mO3gALKMj++ YBPw9B5EM622H2cKJGFzoHFSO4X9nM1CCMeuFCo6bVsbWfMtX3ENqsYl2IQy1JkB pGiKqcNXGWU0mdUcZKs/8ilfLG1NhaLwrkfinlsP9V1+8z8LxxDH5Qh27AT3rIvu W87OITTZoHlUaDVHYTautHTZoqM381xv9kNoQlS9lpH/gcFOPiO9DLj8NcLjkJ4y S/OrxOwfQ+BGKwnk8daFQFAc3Nr9KeVAQH7CbOW7guARhj3z97J0+wPm6nZGEE2s tDzg8zLT9LtbmUypJLurl29+wFE4fPNsnd69XDONbMFN1Ox2tJM3dd/rPCsHSUvz kEOK9gUreHOv7/Ou6UIHlYVlHY7HHuD7TAsrhaaWk7CEmlY31UKwXG+fMl1FAnSy F3PcBF/1M687RRFWVeMlug/+0/+ghtc+kZ1YyR79KZR6dI0C7ueQbCBGztCCtFDz RjrHcDifS0Y2GNQO9+zAyrJvttidRATdYDeFstk+8nnta3CnYzxCp4rn5hs3Ss3N AJVJm244jR3AcoL4V/tQwiQlYh9ZYN5tZ7qxFiASdtV50Uc8HoIrWXeP0Ar+GHiV 2z/f5fKF4+5clQ== =7a1C -----END PGP SIGNATURE----- Merge tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Update Tasks RCU and Tasks Rude RCU description in Requirements.rst and clarify rcu_assign_pointer() and rcu_dereference() ordering properties - Add lockdep assertions for RCU readers, limit inline wakeups for callback-bypass synchronize_rcu(), add an rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add Uladzislau Rezki as RCU maintainer, and fix a subtle callback-migration memory-ordering issue - Remove a number of redundant memory barriers - Remove unnecessary bypass-list lock-contention mitigation, use parking API instead of open-coded ad-hoc equivalent, and upgrade obsolete comments - Revert avoidance of a deadlock that can no longer occur and properly synchronize Tasks Trace RCU checking of runqueues - Add tests for handling of double-call_rcu() bug, add missing MODULE_DESCRIPTION, and add a script that histograms the number of calls to RCU updaters - Fill out SRCU polled-grace-period API * tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits) rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation rcu: Eliminate lockless accesses to rcu_sync->gp_count MAINTAINERS: Add Uladzislau Rezki as RCU maintainer rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter rcu/exp: Remove redundant full memory barrier at the end of GP rcu: Remove full memory barrier on RCU stall printout rcu: Remove full memory barrier on boot time eqs sanity check rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot rcu: Remove superfluous full memory barrier upon first EQS snapshot rcu: Remove full ordering on second EQS snapshot srcu: Fill out polled grace-period APIs srcu: Update cleanup_srcu_struct() comment srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE srcu: Disable interrupts directly in srcu_gp_end() rcu: Disable interrupts directly in rcu_gp_init() rcu/tree: Reduce wake up for synchronize_rcu() common case rcu/tasks: Fix stale task snaphot for Tasks Trace tools/rcu: Add rcu-updaters.sh script rcutorture: Add missing MODULE_DESCRIPTION() macros rcutorture: Fix rcu_torture_fwd_cb_cr() data race ... |
||
|
Linus Torvalds
|
253e1e9818 |
lkmm: Fix corner-case locking bug and improve documentation
A simple but odd single-process litmus test acquires and immediately releases a lock, then calls spin_is_locked(). LKMM acts if it was a deadlock due to an assumption that spin_is_locked() will follow a spin_lock() or some other process's spin_unlock(). This litmus test manages to violate this assumption because the spin_is_locked() follows the same process's spin_unlock(). This series fixes this bug, reorganizes and optimizes the lock.cat model, and updates documentation. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmaRwSUTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jNmcD/0dhWCkytKMLwVke6oLP++HTFK/Uzrb XsXkq5t0Y+xzf7KKca9XuqEMRnaenLM07Swx0ujn2fH7FrXCNlzHD6R4T2e8r+L5 9TVa1ewRfpjH8tM6YLsMbiH4yRah47F9p6CulRHJiHtyU2pLgThIF0/KrhiYKn2P aBF4zclt0TJkTgJDaoJ45z6YTWNFMv+DopRwWT9vm0CNS4jaxHrn8CaBtiv1arWe 9CMArXtPS6eJjbZ9RPLSVlNUufLD7QnyPXRPjd7hwBHReEgcfvpAYKfsAZanhSqv vTp9PRQlu1j9pcjrSCzZ2baBXd0XhuX2wtjNBZXcb2yzIj6V2t5rADKKEG7IONTj eV0ZpMm5bF6lUZBtr1YowgNPwKktdqIVavXk1Sl/fiUs/B8thKZI/pekOMLwq5An SdcCO2m6tY5fYvsvIpfRExvx3TGrRHw+64C/jZrGPhLL6d87tTr0uuyZe1XDxv2+ yGkDuKHUGg7lAXbd6sPvPLOej6pOFbb43qUa7AwBtXBrUs9nF1AuegTM8ux+5eCe qbA6GrvPyeSXOwsy0XD83oOQ4o93f0GdpMnIgQNK32uaEvQJf1MenTcTjXD8RfGv FqxSqhSGNQSXjmBCRFHujR2lR7aWSEUWTEdV+hnSd8O0q4IG2LMwK+TzbtJXJTl8 KZgRYz7lne7sQw== =kUWy -----END PGP SIGNATURE----- Merge tag 'lkmm.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull memory model updates from Paul McKenney: "lkmm: Fix corner-case locking bug and improve documentation A simple but odd single-process litmus test acquires and immediately releases a lock, then calls spin_is_locked(). LKMM acts if it was a deadlock due to an assumption that spin_is_locked() will follow a spin_lock() or some other process's spin_unlock(). This litmus test manages to violate this assumption because the spin_is_locked() follows the same process's spin_unlock(). This series fixes this bug, reorganizes and optimizes the lock.cat model, and updates documentation" * tag 'lkmm.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/memory-model: Code reorganization in lock.cat tools/memory-model: Fix bug in lock.cat tools/memory-model: Add access-marking.txt to README tools/memory-model: Add KCSAN LF mentorship session citation |
||
Jakub Kicinski
|
51b35d4f9d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.11 net-next PR. Conflicts: |
||
|
Linus Torvalds
|
f608cabaed |
vfs-6.11.mount
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEHCgAKCRCRxhvAZXjc
om+gAQCC4nJqJqs9bJZIItRtZ71GnxZQO3HVohhIlNM2KKh0VgEA47JhD0O0Srfb
CleII4cQWqB32BfB/vMeff6hpNa7SA4=
=7ltk
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount query updates from Christian Brauner:
"This contains work to extend the abilities of listmount() and
statmount() and various fixes and cleanups.
Features:
- Allow iterating through mounts via listmount() from newest to
oldest. This makes it possible for mount(8) to keep iterating the
mount table in reverse order so it gets newest mounts first.
- Relax permissions on listmount() and statmount().
It's not necessary to have capabilities in the initial namespace:
it is sufficient to have capabilities in the owning namespace of
the mount namespace we're located in to list unreachable mounts in
that namespace.
- Extend both listmount() and statmount() to list and stat mounts in
foreign mount namespaces.
Currently the only way to iterate over mount entries in mount
namespaces that aren't in the caller's mount namespace is by
crawling through /proc in order to find /proc/<pid>/mountinfo for
the relevant mount namespace.
This is both very clumsy and hugely inefficient. So extend struct
mnt_id_req with a new member that allows to specify the mount
namespace id of the mount namespace we want to look at.
Luckily internally we already have most of the infrastructure for
this so we just need to expose it to userspace. Give userspace a
way to retrieve the id of a mount namespace via statmount() and
through a new nsfs ioctl() on mount namespace file descriptor.
This comes with appropriate selftests.
- Expose mount options through statmount().
Currently if userspace wants to get mount options for a mount and
with statmount(), they still have to open /proc/<pid>/mountinfo to
parse mount options. Simply the information through statmount()
directly.
Afterwards it's possible to only rely on statmount() and
listmount() to retrieve all and more information than
/proc/<pid>/mountinfo provides.
This comes with appropriate selftests.
Fixes:
- Avoid copying to userspace under the namespace semaphore in
listmount.
Cleanups:
- Simplify the error handling in listmount by relying on our newly
added cleanup infrastructure.
- Refuse invalid mount ids early for both listmount and statmount"
* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reject invalid last mount id early
fs: refuse mnt id requests with invalid ids early
fs: find rootfs mount of the mount namespace
fs: only copy to userspace on success in listmount()
sefltests: extend the statmount test for mount options
fs: use guard for namespace_sem in statmount()
fs: export mount options via statmount()
fs: rename show_mnt_opts -> show_vfsmnt_opts
selftests: add a test for the foreign mnt ns extensions
fs: add an ioctl to get the mnt ns id from nsfs
fs: Allow statmount() in foreign mount namespace
fs: Allow listmount() in foreign mount namespace
fs: export the mount ns id via statmount
fs: keep an index of current mount namespaces
fs: relax permissions for statmount()
listmount: allow listing in reverse order
fs: relax permissions for listmount()
fs: simplify error handling
fs: don't copy to userspace under namespace semaphore
path: add cleanup helper
|
||
Rafael J. Wysocki
|
a02bed4183 |
Merge branches 'pm-opp' and 'pm-tools'
Merge OPP (operating performance points) and tooling updates for 6.11-rc1: - Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar). - Introduce an OF helper function to inform if required-opps is used and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson). - Update pm-graph to v5.12 which includes fixes and major code revamp for python3.12 (Todd Brandt). - Address several assorted issues in the cpupower utility (Roman Storozhenko). * pm-opp: OPP: Introduce an OF helper function to inform if required-opps is used OPP: Drop a redundant in-parameter to _set_opp_level() OPP: Fix missing cleanup on error in _opp_attach_genpd() * pm-tools: cpupower: fix lib default installation path cpupower: Disable direct build of the 'bench' subproject cpupower: Change the var type of the 'monitor' subcommand display mode cpupower: Remove absent 'v' parameter from monitor man page cpupower: Improve cpupower build process description cpupower: Add 'help' target to the main Makefile cpupower: Replace a dead reference link with working ones pm-graph: v5.12, code revamp for python3.12 pm-graph: v5.12, fixes |
||
Takashi Iwai
|
97b10a77b1 |
ASoC: Updates for for v6.11
There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible. A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.
Highlights:
- Syncing of features between simple-audio-card and the two
audio-graph cards so there is no reason to stick with an older
driver.
- Support for specifying the order of operations for components within
cards to allow quirking for unusual systems.
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVJSQACgkQJNaLcl1U
h9C8vwf/Q/wzwY5DSx8JM+qRkhjQdN11ILm5ZL8CD36K5frpv4YuqkHxvI3AO8Yb
+LGLVzmcf6XW4+SGBkXoSOUZOYK726Ld2+BoqTM0isPXHinGdrkcUhUcHKy7qS7g
3MImaVM+nGJGyO718cJ++XnEy7uNkbiA0ztIxy2Ui2Dzxq5LX++tT0IroRxf4AAf
zIFgZpaZz4lueTJ1d0FB7uIG4XHxg4nTn7cSllPhGr5mjiZZhOIwDGE1+9GQC44q
k8oMOACrh887qDSScCbW+pplLJunlei2EC28oVNxsUkNaxl+ItEj1s+X0XH1id6u
FZquRQPHZ9mJ0/QTlzo2l4g4EvOxKg==
=YXaR
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for for v6.11
There are a lot of changes in here, though the big bulk of things is
cleanups and simplifications of various kinds which are internally
rather than externally visible. A good chunk of those are DT schema
conversions, but there's also a lot of changes in the code.
Highlights:
- Syncing of features between simple-audio-card and the two
audio-graph cards so there is no reason to stick with an older
driver.
- Support for specifying the order of operations for components within
cards to allow quirking for unusual systems.
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242.
|
||
Vlastimil Babka
|
436381eaf2 |
Merge branch 'slab/for-6.11/buckets' into slab/for-next
Merge all the slab patches previously collected on top of v6.10-rc1, over cleanups/fixes that had to be based on rc6. |
||
Jiri Olsa
|
3e301b431b |
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
Fixing the syscall number value.
Link: https://lore.kernel.org/all/20240712135228.1619332-3-jolsa@kernel.org/
Fixes:
|
||
Tejun Heo
|
9283ff5be1 | Merge branch 'for-6.10-fixes' into for-6.11 | ||
Nicolas Dichtel
|
39367183ae |
selftests: vrf_route_leaking: add local test
The goal is to check that the source address selected by the kernel is routable when a leaking route is used. ICMP, TCP and UDP connections are tested. The symmetric topology is enough for this test. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240710081521.3809742-5-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Amit Cohen
|
f67a90a0c8 |
selftests: forwarding: devlink_lib: Wait for udev events after reloading
Lately, an additional locking was added by commit |
||
Matthieu Baerts (NGI0)
|
464b99e77b |
selftests: mptcp: lib: fix shellcheck errors
It looks like we missed these two errors recently:
- SC2068: Double quote array expansions to avoid re-splitting elements.
- SC2145: Argument mixes string and array. Use * or separate argument.
Two simple fixes, it is not supposed to change the behaviour as the
variable names should not have any spaces in their names. Still, better
to fix them to easily spot new issues.
Fixes:
|
||
Kuniyuki Iwashima
|
b3bb4d23a4 |
selftests: tcp: Remove broken SNMP assumptions for TCP AO self-connect tests.
tcp_ao/self-connect.c checked the following SNMP stats before/after connect() to confirm that the test exercises the simultaneous connect() path. * TCPChallengeACK * TCPSYNChallenge But the stats should not be counted for self-connect in the first place, and the assumption is no longer true. Let's remove the check. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Link: https://patch.msgid.link/20240710171246.87533-3-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Peng Fan
|
42ffe24286 |
test/vsock: add install target
Add install target for vsock to make Yocto easy to install the images. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20240710122728.45044-1-peng.fan@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
26f453176a |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZpGVmAAKCRDbK58LschI gxB4AQCgquQis63yqTI36j4iXBT+TuxHEBNoQBSLyzYdrLS1dgD/S5DRJDA+3LD+ 394hn/VtB1qvX5vaqjsov4UIwSMyxA0= =OhSn -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-12 We've added 23 non-merge commits during the last 3 day(s) which contain a total of 18 files changed, 234 insertions(+), 243 deletions(-). The main changes are: 1) Improve BPF verifier by utilizing overflow.h helpers to check for overflows, from Shung-Hsi Yu. 2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT when attr->attach_prog_fd was not specified, from Tengda Wu. 3) Fix arm64 BPF JIT when generating code for BPF trampolines with BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits, from Puranjay Mohan. 4) Remove test_run callback from lwt_seg6local_prog_ops which never worked in the first place and caused syzbot reports, from Sebastian Andrzej Siewior. 5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/ /KF_RCU-typed BPF kfuncs, from Matt Bobrowski. 6) Fix a long standing bug in libbpf with regards to handling of BPF skeleton's forward and backward compatibility, from Andrii Nakryiko. 7) Annotate btf_{seq,snprintf}_show functions with __printf, from Alan Maguire. 8) BPF selftest improvements to reuse common network helpers in sk_lookup test and dropping the open-coded inetaddr_len() and make_socket() ones, from Geliang Tang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits) selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type() bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again bpf: use check_sub_overflow() to check for subtraction overflows bpf: use check_add_overflow() to check for addition overflows bpf: fix overflow check in adjust_jmp_off() bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o bpf: annotate BTF show functions with __printf bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG selftests/bpf: Close obj in error path in xdp_adjust_tail selftests/bpf: Null checks for links in bpf_tcp_ca selftests/bpf: Use connect_fd_to_fd in sk_lookup selftests/bpf: Use start_server_addr in sk_lookup selftests/bpf: Use start_server_str in sk_lookup selftests/bpf: Close fd in error path in drop_on_reuseport selftests/bpf: Add ASSERT_OK_FD macro selftests/bpf: Add backlog for network_helper_opts selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m bpf: Remove tst_run from lwt_seg6local_prog_ops. bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU ... ==================== Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Tengda Wu
|
e435b043d8 |
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
This test verifies that resolve_prog_type() works as expected when `attach_prog_fd` is not passed in. `prog->aux->dst_prog` in resolve_prog_type() is assigned by `attach_prog_fd`, and would be NULL if `attach_prog_fd` is not provided. Loading EXT prog with bpf_dynptr_from_skb() kfunc call in this way will lead to null-pointer-deref. Verify that the null-pointer-deref bug in resolve_prog_type() is fixed. Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240711145819.254178-3-wutengda@huaweicloud.com |