In preparation for adding sysfs ABI to toggle memmap_on_memory semantics
for drivers adding memory, export the mhp_supports_memmap_on_memory()
helper. This allows drivers to check if memmap_on_memory support is
available before trying to request it, and display an appropriate
message if it isn't available. As part of this, remove the size argument
to this - with recent updates to allow memmap_on_memory for larger
ranges, and the internal splitting of altmaps into respective memory
blocks, the size argument is meaningless.
[akpm@linux-foundation.org: fix build]
Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-4-20d16cb8d23d@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "implement "memmap on memory" feature on s390".
This series provides "memmap on memory" support on s390 platform. "memmap
on memory" allows struct pages array to be allocated from the hotplugged
memory range instead of allocating it from main system memory.
s390 currently preallocates struct pages array for all potentially
possible memory, which ensures memory onlining always succeeds, but with
the cost of significant memory consumption from the available system
memory during boottime. In certain extreme configuration, this could lead
to ipl failure.
"memmap on memory" ensures struct pages array are populated from self
contained hotplugged memory range instead of depleting the available
system memory and this could eliminate ipl failure on s390 platform.
On other platforms, system might go OOM when the physically hotplugged
memory depletes the available memory before it is onlined. Hence, "memmap
on memory" feature was introduced as described in commit a08a2ae346
("mm,memory_hotplug: allocate memmap from the added memory range").
Unlike other architectures, s390 memory blocks are not physically
accessible until it is online. To make it physically accessible two new
memory notifiers MEM_PREPARE_ONLINE / MEM_FINISH_OFFLINE are added and
this notifier lets the hypervisor inform that the memory should be made
physically accessible. This allows for "memmap on memory" initialization
during memory hotplug onlining phase, which is performed before calling
MEM_GOING_ONLINE notifier.
Patch 1 introduces MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers
to prepare the transition of memory to and from a physically accessible
state. New mhp_flag MHP_OFFLINE_INACCESSIBLE is introduced to ensure
altmap cannot be written when adding memory - before it is set online.
This enhancement is crucial for implementing the "memmap on memory"
feature for s390 in a subsequent patch.
Patches 2 allocates vmemmap pages from self-contained memory range for
s390. It allocates memory map (struct pages array) from the hotplugged
memory range, rather than using system memory by passing altmap to vmemmap
functions.
Patch 3 removes unhandled memory notifier types on s390.
Patch 4 implements MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers
on s390. MEM_PREPARE_ONLINE memory notifier makes memory block physical
accessible via sclp assign command. The notifier ensures self-contained
memory maps are accessible and hence enabling the "memmap on memory" on
s390. MEM_FINISH_OFFLINE memory notifier shifts the memory block to an
inaccessible state via sclp unassign command.
Patch 5 finally enables MHP_MEMMAP_ON_MEMORY on s390.
This patch (of 5):
Introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers to
prepare the transition of memory to and from a physically accessible
state. This enhancement is crucial for implementing the "memmap on
memory" feature for s390 in a subsequent patch.
Platforms such as x86 can support physical memory hotplug via ACPI. When
there is physical memory hotplug, ACPI event leads to the memory addition
with the following callchain:
acpi_memory_device_add()
-> acpi_memory_enable_device()
-> __add_memory()
After this, the hotplugged memory is physically accessible, and altmap
support prepared, before the "memmap on memory" initialization in
memory_block_online() is called.
On s390, memory hotplug works in a different way. The available hotplug
memory has to be defined upfront in the hypervisor, but it is made
physically accessible only when the user sets it online via sysfs,
currently in the MEM_GOING_ONLINE notifier. This is too late and "memmap
on memory" initialization is performed before calling MEM_GOING_ONLINE
notifier.
During the memory hotplug addition phase, altmap support is prepared and
during the memory onlining phase s390 requires memory to be physically
accessible and then subsequently initiate the "memmap on memory"
initialization process.
The memory provider will handle new MEM_PREPARE_ONLINE /
MEM_FINISH_OFFLINE notifications and make the memory accessible.
The mhp_flag MHP_OFFLINE_INACCESSIBLE is introduced and is relevant when
used along with MHP_MEMMAP_ON_MEMORY, because the altmap cannot be written
(e.g., poisoned) when adding memory -- before it is set online. This
allows for adding memory with an altmap that is not currently made
available by a hypervisor. When onlining that memory, the hypervisor can
be instructed to make that memory accessible via the new notifiers and the
onlining phase will not require any memory allocations, which is helpful
in low-memory situations.
All architectures ignore unknown memory notifiers. Therefore, the
introduction of these new notifiers does not result in any functional
modifications across architectures.
Link: https://lkml.kernel.org/r/20240108132747.3238763-1-sumanthk@linux.ibm.com
Link: https://lkml.kernel.org/r/20240108132747.3238763-2-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_memmap_mode() stores the kernel parameter memmap mode as an integer.
However, the get_memmap_mode() function utilizes param_get_bool() to fetch
the value as a boolean, leading to potential endianness issue. On
Big-endian architectures, the memmap_on_memory is consistently displayed
as 'N' regardless of its actual status.
To address this endianness problem, the solution involves obtaining the
mode as an integer. This adjustment ensures the proper display of the
memmap_on_memory parameter, presenting it as one of the following options:
Force, Y, or N.
Link: https://lkml.kernel.org/r/20240110140127.241451-1-sumanthk@linux.ibm.com
Fixes: 2d1f649c7c ("mm/memory_hotplug: support memmap_on_memory when memmap is not aligned to pageblocks")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The MHP_MEMMAP_ON_MEMORY flag for hotplugged memory is restricted to
'memblock_size' chunks of memory being added. Adding a larger span of
memory precludes memmap_on_memory semantics.
For users of hotplug such as kmem, large amounts of memory might get added
from the CXL subsystem. In some cases, this amount may exceed the
available 'main memory' to store the memmap for the memory being added.
In this case, it is useful to have a way to place the memmap on the memory
being added, even if it means splitting the addition into memblock-sized
chunks.
Change add_memory_resource() to loop over memblock-sized chunks of memory
if caller requested memmap_on_memory, and if other conditions for it are
met. Teach try_remove_memory() to also expect that a memory range being
removed might have been split up into memblock sized chunks, and to loop
through those as needed.
This does preclude being able to use PUD mappings in the direct map; a
proposal to how this could be optimized in the future is laid out here[1].
[1]: https://lore.kernel.org/linux-mm/b6753402-2de9-25b2-36e9-eacd49752b19@redhat.com/
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-2-1253ec050ed0@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: use memmap_on_memory semantics for dax/kmem", v10.
The dax/kmem driver can potentially hot-add large amounts of memory
originating from CXL memory expanders, or NVDIMMs, or other 'device
memories'. There is a chance there isn't enough regular system memory
available to fit the memmap for this new memory. It's therefore
desirable, if all other conditions are met, for the kmem managed memory to
place its memmap on the newly added memory itself.
The main hurdle for accomplishing this for kmem is that memmap_on_memory
can only be done if the memory being added is equal to the size of one
memblock. To overcome this, allow the hotplug code to split an
add_memory() request into memblock-sized chunks, and try_remove_memory()
to also expect and handle such a scenario.
Patch 1 replaces an open-coded kmemdup()
Patch 2 teaches the memory_hotplug code to allow for splitting
add_memory() and remove_memory() requests over memblock sized chunks.
Patch 3 allows the dax region drivers to request memmap_on_memory
semantics. CXL dax regions default this to 'on', all others default to
off to keep existing behavior unchanged.
This patch (of 3):
A review of the memmap_on_memory modifications to add_memory_resource()
revealed an instance of an open-coded kmemdup(). Replace it with
kmemdup().
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-0-1253ec050ed0@intel.com
Link: https://lkml.kernel.org/r/20231107-vv-kmem_memmap-v10-1-1253ec050ed0@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory(). However, creation of memory block
devices could fail. In that case, arch_remove_memory() is called to
perform necessary cleanup.
Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling. This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().
Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().
Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com
Fixes: a08a2ae346 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae346 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In offline_pages(), if a node becomes memoryless, we will clear its
N_MEMORY state by calling node_states_clear_node(). But we do this
after rebuilding the zonelists by calling build_all_zonelists(), which
will cause this memoryless node to still be in the fallback nodes
(node_order[]) of other nodes.
To drop memoryless nodes from fallback nodes in this case, just call
node_states_clear_node() before calling build_all_zonelists().
In this way, we will not try to allocate pages from memoryless node0,
then the panic mentioned in [1] will also be fixed. Even though this
problem has been solved by dropping the NODE_MIN_SIZE constrain in x86
[2], it would be better to fix it in the core MM as well.
https://lore.kernel.org/all/20230212110305.93670-1-zhengqi.arch@bytedance.com/ [1]
https://lore.kernel.org/all/20231017062215.171670-1-rppt@kernel.org/ [2]
Link: https://lkml.kernel.org/r/9f1dbe7ee1301c7163b2770e32954ff5e3ecf2c4.1697711415.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to
handle it properly.
Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes: eeb0efd071 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With memmap on memory, some architecture needs more details w.r.t altmap
such as base_pfn, end_pfn, etc to unmap vmemmap memory. Instead of
computing them again when we remove a memory block, embed vmem_altmap
details in struct memory_block if we are using memmap on memory block
feature.
[yangyingliang@huawei.com: fix error return code in add_memory_resource()]
Link: https://lkml.kernel.org/r/20230809081552.1351184-1-yangyingliang@huawei.com
Link: https://lkml.kernel.org/r/20230808091501.287660-7-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, memmap_on_memory feature is only supported with memory block
sizes that result in vmemmap pages covering full page blocks. This is
because memory onlining/offlining code requires applicable ranges to be
pageblock-aligned, for example, to set the migratetypes properly.
This patch helps to lift that restriction by reserving more pages than
required for vmemmap space. This helps the start address to be page block
aligned with different memory block sizes. Using this facility implies
the kernel will be reserving some pages for every memoryblock. This
allows the memmap on memory feature to be widely useful with different
memory block size values.
For ex: with 64K page size and 256MiB memory block size, we require 4
pages to map vmemmap pages, To align things correctly we end up adding a
reserve of 28 pages. ie, for every 4096 pages 28 pages get reserved.
Link: https://lkml.kernel.org/r/20230808091501.287660-5-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some architectures would want different restrictions. Hence add an
architecture-specific override.
The PMD_SIZE check is moved there.
Link: https://lkml.kernel.org/r/20230808091501.287660-4-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If not supported, fallback to not using memap on memmory. This avoids
the need for callers to do the fallback.
Link: https://lkml.kernel.org/r/20230808091501.287660-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's update the documentation that any signal is sufficient, and add a
comment that not only checking for fatal signals is historical baggage:
changing it now could break existing user space. although unlikely.
For example, when an app provides a custom SIGALRM handler and triggers
memory offlining, the timeout cmd would no longer stop memory offlining,
because SIGALRM would no longer be considered a fatal signal.
Note that using signal_pending() instead of fatal_signal_pending() is
an anti-pattern, but slowly deprecating that behavior to eventually
change it in the far future is probably not worth the effort. If this
ever becomes relevant for user-space, we might want to rethink.
Link: https://lkml.kernel.org/r/20230711174050.603820-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These files no longer need pagevec.h, mostly due to function declarations
being moved out of it.
Link: https://lkml.kernel.org/r/20230621164557.3510324-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
reset_node_present_pages() only get called in hotadd_init_pgdat(), move
the action that clear present pages to free_area_init_core_hotplug(), so
the helper can be removed.
Link: https://lkml.kernel.org/r/20230607025056.1348-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
managed pages has already been set to 0 in free_area_init_core_hotplug(),
via zone_init_internals() on each zone. It's pointless to reset again.
Furthermore, reset_node_managed_pages() no longer needs to be exposed
outside of mm/memblock.c. Remove declaration in include/linux/memblock.h
and define it as static.
In addtion to this, the only caller of reset_node_managed_pages() is
reset_all_zones_managed_pages(), which is annotated with __init, so it
should be safe to also mark reset_node_managed_pages() as __init.
Link: https://lkml.kernel.org/r/20230607024548.1240-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These parameters ms and map_offset are not used in
sparse_remove_section(), so remove them.
The __remove_section() is only called by __remove_pages(), remove it. And
put the WARN_ON_ONCE() in sparse_remove_section().
Link: https://lkml.kernel.org/r/20230607023952.2247489-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The format string in __add_pages and __remove_pages has a typo and prints
e.g., "Misaligned __add_pages start: 0xfc605 end: #fc609" instead of
"Misaligned __add_pages start: 0xfc605 end: 0xfc609" Fix "#%lx" => "%#lx"
Link: https://lkml.kernel.org/r/20230510090758.3537242-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") results in
various boot failures (hang) on arm targets Debug messages reveal the
reason.
########### MAX_ORDER=10 start=0 __ffs(start)=-1 min()=10 min_t=-1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If start==0, __ffs(start) returns 0xfffffff or (as int) -1, which min_t()
interprets as such, while min() apparently uses the returned unsigned long
value. Obviously a negative order isn't received well by the rest of the
code.
[akpm@linux-foundation.org: fix comment, per Mike]
Link: https://lkml.kernel.org/r/ZDBa7HWZK69dKKzH@kernel.org
Link: https://lkml.kernel.org/r/20230406072529.vupqyrzqnhyozeyh@box.shutemov.name
Fixes: 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely")
Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/9460377a-38aa-4f39-ad57-fb73725f92db@roeck-us.net
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Return value mechanism of do_migrate_range() is not very simple, while no
caller of the function checks the return value. Make the function return
nothing to be more simple, and cleanup related unnecessary code.
Link: https://lkml.kernel.org/r/20230216170703.64574-1-sj@kernel.org
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now the isolate_movable_page() can only return 0 or -EBUSY, and no users
will care about the negative return value, thus we can convert the
isolate_movable_page() to return a boolean value to make the code more
clear when checking the movable page isolation state.
No functional changes intended.
[akpm@linux-foundation.org: remove unneeded comment, per Matthew]
Link: https://lkml.kernel.org/r/cb877f73f4fff8d309611082ec740a7065b1ade0.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The isolate_lru_page() can only return 0 or -EBUSY, and most users did not
care about the negative error of isolate_lru_page(), except one user in
add_page_for_migration(). So we can convert the isolate_lru_page() to
return a boolean value, which can help to make the code more clear when
checking the return value of isolate_lru_page().
Also convert all users' logic of checking the isolation state.
No functional changes intended.
Link: https://lkml.kernel.org/r/3074c1ab628d9dbf139b33f248a8bc253a3f95f0.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "continue hugetlb folio conversion", v3.
This series continues the conversion of core hugetlb functions to use
folios. This series converts many helper funtions in the hugetlb fault
path. This is in preparation for another series to convert the hugetlb
fault code paths to operate on folios.
This patch (of 8):
Convert isolate_hugetlb() to take in a folio and convert its callers to
pass a folio. Use page_folio() to convert the callers to use a folio is
safe as isolate_hugetlb() operates on a head page.
Link: https://lkml.kernel.org/r/20230113223057.173292-1-sidhartha.kumar@oracle.com
Link: https://lkml.kernel.org/r/20230113223057.173292-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add pageblock_aligned() and use it to simplify code.
Link: https://lkml.kernel.org/r/20220907060844.126891-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kswapd_run/stop() will set pgdat->kswapd to NULL, which could race with
kswapd_is_running() in kcompactd(),
kswapd_run/stop() kcompactd()
kswapd_is_running()
pgdat->kswapd // error or nomal ptr
verify pgdat->kswapd
// load non-NULL
pgdat->kswapd
pgdat->kswapd = NULL
task_is_running(pgdat->kswapd)
// Null pointer derefence
KASAN reports the null-ptr-deref shown below,
vmscan: Failed to start kswapd on node 0
...
BUG: KASAN: null-ptr-deref in kcompactd+0x440/0x504
Read of size 8 at addr 0000000000000024 by task kcompactd0/37
CPU: 0 PID: 37 Comm: kcompactd0 Kdump: loaded Tainted: G OE 5.10.60 #1
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x0/0x394
show_stack+0x34/0x4c
dump_stack+0x158/0x1e4
__kasan_report+0x138/0x140
kasan_report+0x44/0xdc
__asan_load8+0x94/0xd0
kcompactd+0x440/0x504
kthread+0x1a4/0x1f0
ret_from_fork+0x10/0x18
At present kswapd/kcompactd_run() and kswapd/kcompactd_stop() are protected
by mem_hotplug_begin/done(), but without kcompactd(). There is no need to
involve memory hotplug lock in kcompactd(), so let's add a new mutex to
protect pgdat->kswapd accesses.
Also, because the kcompactd task will check the state of kswapd task, it's
better to call kcompactd_stop() before kswapd_stop() to reduce lock
conflicts.
[akpm@linux-foundation.org: add comments]
Link: https://lkml.kernel.org/r/20220827111959.186838-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly check state of struct memory_block, no need a single function.
Link: https://lkml.kernel.org/r/20220827112043.187028-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use is_zone_movable_page() helper to simplify code.
Link: https://lkml.kernel.org/r/20220726131135.146912-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For now, the feature of hugetlb_free_vmemmap is not compatible with the
feature of memory_hotplug.memmap_on_memory, and hugetlb_free_vmemmap takes
precedence over memory_hotplug.memmap_on_memory. However, someone wants
to make memory_hotplug.memmap_on_memory takes precedence over
hugetlb_free_vmemmap since memmap_on_memory makes it more likely to
succeed memory hotplug in close-to-OOM situations. So the decision of
making hugetlb_free_vmemmap take precedence is not wise and elegant.
The proper approach is to have hugetlb_vmemmap.c do the check whether the
section which the HugeTLB pages belong to can be optimized. If the
section's vmemmap pages are allocated from the added memory block itself,
hugetlb_free_vmemmap should refuse to optimize the vmemmap, otherwise, do
the optimization. Then both kernel parameters are compatible. So this
patch introduces VmemmapSelfHosted to mask any non-optimizable vmemmap
pages. The hugetlb_vmemmap can use this flag to detect if a vmemmap page
can be optimized.
[songmuchun@bytedance.com: walk vmemmap page tables to avoid false-positive]
Link: https://lkml.kernel.org/r/20220620110616.12056-3-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220617135650.74901-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Co-developed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "make hugetlb_optimize_vmemmap compatible with
memmap_on_memory", v3.
This series makes hugetlb_optimize_vmemmap compatible with
memmap_on_memory.
This patch (of 2):
We are almost running out of section flags, only one bit is available in
the worst case (powerpc with 256k pages). However, there are still some
free bits (in ->section_mem_map) on other architectures (e.g. x86_64 has
10 bits available, arm64 has 8 bits available with worst case of 64K
pages). We have hard coded those numbers in code, it is inconvenient to
use those bits on other architectures except powerpc. So transfer those
section flags to enumeration to make it easy to add new section flags in
the future. Also, move SECTION_TAINT_ZONE_DEVICE into the scope of
CONFIG_ZONE_DEVICE to save a bit on non-zone-device case.
[songmuchun@bytedance.com: replace enum with defines per David]
Link: https://lkml.kernel.org/r/20220620110616.12056-2-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220617135650.74901-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20220617135650.74901-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We might fail to isolate huge page due to e.g. the page is under
migration which cleared HPageMigratable. We should return errno in this
case rather than always return 1 which could confuse the user, i.e. the
caller might think all of the memory is migrated while the hugetlb page is
left behind. We make the prototype of isolate_huge_page consistent with
isolate_lru_page as suggested by Huang Ying and rename isolate_huge_page
to isolate_hugetlb as suggested by Muchun to improve the readability.
Link: https://lkml.kernel.org/r/20220530113016.16663-4-linmiaohe@huawei.com
Fixes: e8db67eb0d ("mm: migrate: move_pages() supports thp migration")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Huang Ying <ying.huang@intel.com>
Reported-by: kernel test robot <lkp@intel.com> (build error)
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In check_pfn_span(), a 'reason' string is being used to recreate the
caller function name, while printing the warning message. It is really
unnecessary as the warning message could just be printed inside the caller
depending on the return code. Currently there are just two callers for
check_pfn_span() i.e __add_pages() and __remove_pages(). Let's clean this
up.
Link: https://lkml.kernel.org/r/20220531090441.170650-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We must add hugetlb_free_vmemmap=on (or "off") to the boot cmdline and
reboot the server to enable or disable the feature of optimizing vmemmap
pages associated with HugeTLB pages. However, rebooting usually takes a
long time. So add a sysctl to enable or disable the feature at runtime
without rebooting. Why we need this? There are 3 use cases.
1) The feature of minimizing overhead of struct page associated with
each HugeTLB is disabled by default without passing
"hugetlb_free_vmemmap=on" to the boot cmdline. When we (ByteDance)
deliver the servers to the users who want to enable this feature, they
have to configure the grub (change boot cmdline) and reboot the
servers, whereas rebooting usually takes a long time (we have thousands
of servers). It's a very bad experience for the users. So we need a
approach to enable this feature after rebooting. This is a use case in
our practical environment.
2) Some use cases are that HugeTLB pages are allocated 'on the fly'
instead of being pulled from the HugeTLB pool, those workloads would be
affected with this feature enabled. Those workloads could be
identified by the characteristics of they never explicitly allocating
huge pages with 'nr_hugepages' but only set 'nr_overcommit_hugepages'
and then let the pages be allocated from the buddy allocator at fault
time. We can confirm it is a real use case from the commit
099730d674. For those workloads, the page fault time could be ~2x
slower than before. We suspect those users want to disable this
feature if the system has enabled this before and they don't think the
memory savings benefit is enough to make up for the performance drop.
3) If the workload which wants vmemmap pages to be optimized and the
workload which wants to set 'nr_overcommit_hugepages' and does not want
the extera overhead at fault time when the overcommitted pages be
allocated from the buddy allocator are deployed in the same server.
The user could enable this feature and set 'nr_hugepages' and
'nr_overcommit_hugepages', then disable the feature. In this case, the
overcommited HugeTLB pages will not encounter the extra overhead at
fault time.
Link: https://lkml.kernel.org/r/20220512041142.39501-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Optimizing HugeTLB vmemmap pages is not compatible with allocating memmap
on hot added memory. If "hugetlb_free_vmemmap=on" and
memory_hotplug.memmap_on_memory" are both passed on the kernel command
line, optimizing hugetlb pages takes precedence. However, the global
variable memmap_on_memory will still be set to 1, even though we will not
try to allocate memmap on hot added memory.
Also introduce mhp_memmap_on_memory() helper to move the definition of
"memmap_on_memory" to the scope of CONFIG_MHP_MEMMAP_ON_MEMORY. In the
next patch, mhp_memmap_on_memory() will also be exported to be used in
hugetlb_vmemmap.c.
Link: https://lkml.kernel.org/r/20220512041142.39501-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_contig_range() worked at MAX_ORDER_NR_PAGES granularity to avoid
merging pageblocks with different migratetypes. It might unnecessarily
convert extra pageblocks at the beginning and at the end of the range.
Change alloc_contig_range() to work at pageblock granularity.
Special handling is needed for free pages and in-use pages across the
boundaries of the range specified by alloc_contig_range(). Because these=
Partially isolated pages causes free page accounting issues. The free
pages will be split and freed into separate migratetype lists; the in-use=
Pages will be migrated then the freed pages will be handled in the
aforementioned way.
[ziy@nvidia.com: fix deadlock/crash]
Link: https://lkml.kernel.org/r/23A7297E-6C84-4138-A9FE-3598234004E6@nvidia.com
Link: https://lkml.kernel.org/r/20220425143118.2850746-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric Ren <renzhengeek@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pgprot.pgprot is non-portable code. It should be replaced by portable
macro pgprot_val.
Link: https://lkml.kernel.org/r/20220426071302.220646-1-liusongtang@huawei.com
Signed-off-by: liusongtang <liusongtang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "sparse-vmemmap: memory savings for compound devmaps (device-dax)", v9.
This series minimizes 'struct page' overhead by pursuing a similar
approach as Muchun Song series "Free some vmemmap pages of hugetlb page"
(now merged since v5.14), but applied to devmap with @vmemmap_shift
(device-dax).
The vmemmap dedpulication original idea (already used in HugeTLB) is to
reuse/deduplicate tail page vmemmap areas, particular the area which only
describes tail pages. So a vmemmap page describes 64 struct pages, and
the first page for a given ZONE_DEVICE vmemmap would contain the head page
and 63 tail pages. The second vmemmap page would contain only tail pages,
and that's what gets reused across the rest of the subsection/section.
The bigger the page size, the bigger the savings (2M hpage -> save 6
vmemmap pages; 1G hpage -> save 4094 vmemmap pages).
This is done for PMEM /specifically only/ on device-dax configured
namespaces, not fsdax. In other words, a devmap with a @vmemmap_shift.
In terms of savings, per 1Tb of memory, the struct page cost would go down
with compound devmap:
* with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of
total memory)
* with 1G pages we lose 40MB instead of 16G (0.0014% instead of 1.5% of
total memory)
The series is mostly summed up by patch 4, and to summarize what the
series does:
Patches 1 - 3: Minor cleanups in preparation for patch 4. Move the very
nice docs of hugetlb_vmemmap.c into a Documentation/vm/ entry.
Patch 4: Patch 4 is the one that takes care of the struct page savings
(also referred to here as tail-page/vmemmap deduplication). Much like
Muchun series, we reuse the second PTE tail page vmemmap areas across a
given @vmemmap_shift On important difference though, is that contrary to
the hugetlbfs series, there's no vmemmap for the area because we are
late-populating it as opposed to remapping a system-ram range. IOW no
freeing of pages of already initialized vmemmap like the case for
hugetlbfs, which greatly simplifies the logic (besides not being
arch-specific). altmap case unchanged and still goes via the
vmemmap_populate(). Also adjust the newly added docs to the device-dax
case.
[Note that device-dax is still a little behind HugeTLB in terms of
savings. I have an additional simple patch that reuses the head vmemmap
page too, as a follow-up. That will double the savings and namespaces
initialization.]
Patch 5: Initialize fewer struct pages depending on the page size with
DRAM backed struct pages -- because fewer pages are unique and most tail
pages (with bigger vmemmap_shift).
NVDIMM namespace bootstrap improves from ~268-358 ms to
~80-110/<1ms on 128G NVDIMMs with 2M and 1G respectivally. And struct
page needed capacity will be 3.8x / 1071x smaller for 2M and 1G
respectivelly. Tested on x86 with 1.5Tb of pmem (including pinning,
and RDMA registration/deregistration scalability with 2M MRs)
This patch (of 5):
In support of using compound pages for devmap mappings, plumb the pgmap
down to the vmemmap_populate implementation. Note that while altmap is
retrievable from pgmap the memory hotplug code passes altmap without
pgmap[*], so both need to be independently plumbed.
So in addition to @altmap, pass @pgmap to sparse section populate
functions namely:
sparse_add_section
section_activate
populate_section_memmap
__populate_section_memmap
Passing @pgmap allows __populate_section_memmap() to both fetch the
vmemmap_shift in which memmap metadata is created for and also to let
sparse-vmemmap fetch pgmap ranges to co-relate to a given section and pick
whether to just reuse tail pages from past onlined sections.
While at it, fix the kdoc for @altmap for sparse_add_section().
[*] https://lore.kernel.org/linux-mm/20210319092635.6214-1-osalvador@suse.de/
Link: https://lkml.kernel.org/r/20220420155310.9712-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20220420155310.9712-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The word of "free" is not expressive enough to express the feature of
optimizing vmemmap pages associated with each HugeTLB, rename this keywork
to "optimize". In this patch , cheanup the static key and
hugetlb_free_vmemmap_enabled() to make code more expressive.
Link: https://lkml.kernel.org/r/20220404074652.68024-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
test_pages_in_a_zone() is just another nasty PFN walker that can easily
stumble over ZONE_DEVICE memory ranges falling into the same memory block
as ordinary system RAM: the memmap of parts of these ranges might possibly
be uninitialized. In fact, we observed (on an older kernel) with UBSAN:
UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50
index 7 is out of range for type 'zone [5]'
CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...]
Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019
Call Trace:
dump_stack+0x9a/0xf0
ubsan_epilogue+0x9/0x7a
__ubsan_handle_out_of_bounds+0x13a/0x181
test_pages_in_a_zone+0x3c4/0x500
show_valid_zones+0x1fa/0x380
dev_attr_show+0x43/0xb0
sysfs_kf_seq_show+0x1c5/0x440
seq_read+0x49d/0x1190
vfs_read+0xff/0x300
ksys_read+0xb8/0x170
do_syscall_64+0xa5/0x4b0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
RIP: 0033:0x7f01f4439b52
We seem to stumble over a memmap that contains a garbage zone id. While
we could try inserting pfn_to_online_page() calls, it will just make
memory offlining slower, because we use test_pages_in_a_zone() to make
sure we're offlining pages that all belong to the same zone.
Let's just get rid of this PFN walker and determine the single zone of a
memory block -- if any -- for early memory blocks during boot. For memory
onlining, we know the single zone already. Let's avoid any additional
memmap scanning and just rely on the zone information available during
boot.
For memory hot(un)plug, we only really care about memory blocks that:
* span a single zone (and, thereby, a single node)
* are completely System RAM (IOW, no holes, no ZONE_DEVICE)
If one of these conditions is not met, we reject memory offlining.
Hotplugged memory blocks (starting out offline), always meet both
conditions.
There are three scenarios to handle:
(1) Memory hot(un)plug
A memory block with zone == NULL cannot be offlined, corresponding to
our previous test_pages_in_a_zone() check.
After successful memory onlining/offlining, we simply set the zone
accordingly.
* Memory onlining: set the zone we just used for onlining
* Memory offlining: set zone = NULL
So a hotplugged memory block starts with zone = NULL. Once memory
onlining is done, we set the proper zone.
(2) Boot memory with !CONFIG_NUMA
We know that there is just a single pgdat, so we simply scan all zones
of that pgdat for an intersection with our memory block PFN range when
adding the memory block. If more than one zone intersects (e.g., DMA and
DMA32 on x86 for the first memory block) we set zone = NULL and
consequently mimic what test_pages_in_a_zone() used to do.
(3) Boot memory with CONFIG_NUMA
At the point in time we create the memory block devices during boot, we
don't know yet which nodes *actually* span a memory block. While we could
scan all zones of all nodes for intersections, overlapping nodes complicate
the situation and scanning all nodes is possibly expensive. But that
problem has already been solved by the code that sets the node of a memory
block and creates the link in the sysfs --
do_register_memory_block_under_node().
So, we hook into the code that sets the node id for a memory block. If
we already have a different node id set for the memory block, we know
that multiple nodes *actually* have PFNs falling into our memory block:
we set zone = NULL and consequently mimic what test_pages_in_a_zone() used
to do. If there is no node id set, we do the same as (2) for the given
node.
Note that the call order in driver_init() is:
-> memory_dev_init(): create memory block devices
-> node_dev_init(): link memory block devices to the node and set the
node id
So in summary, we detect if there is a single zone responsible for this
memory block and we consequently store the zone in that case in the
memory block, updating it during memory onlining/offlining.
Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Rafael Parra <rparrazo@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rafael Parra <rparrazo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "drivers/base/memory: determine and store zone for single-zone memory blocks", v2.
I remember talking to Michal in the past about removing
test_pages_in_a_zone(), which we use for:
* verifying that a memory block we intend to offline is really only managed
by a single zone. We don't support offlining of memory blocks that are
managed by multiple zones (e.g., multiple nodes, DMA and DMA32)
* exposing that zone to user space via
/sys/devices/system/memory/memory*/valid_zones
Now that I identified some more cases where test_pages_in_a_zone() might
go wrong, and we received an UBSAN report (see patch #3), let's get rid of
this PFN walker.
So instead of detecting the zone at runtime with test_pages_in_a_zone() by
scanning the memmap, let's determine and remember for each memory block if
it's managed by a single zone. The stored zone can then be used for the
above two cases, avoiding a manual lookup using test_pages_in_a_zone().
This avoids eventually stumbling over uninitialized memmaps in corner
cases, especially when ZONE_DEVICE ranges partly fall into memory block
(that are responsible for managing System RAM).
Handling memory onlining is easy, because we online to exactly one zone.
Handling boot memory is more tricky, because we want to avoid scanning all
zones of all nodes to detect possible zones that overlap with the physical
memory region of interest. Fortunately, we already have code that
determines the applicable nodes for a memory block, to create sysfs links
-- we'll hook into that.
Patch #1 is a simple cleanup I had laying around for a longer time.
Patch #2 contains the main logic to remove test_pages_in_a_zone() and
further details.
[1] https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com
[2] https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
This patch (of 2):
Let's adjust the stale terminology, making it match
unregister_memory_block_under_nodes() and
do_register_memory_block_under_node(). We're dealing with memory block
devices, which span 1..X memory sections.
Link: https://lkml.kernel.org/r/20220210184359.235565-1-david@redhat.com
Link: https://lkml.kernel.org/r/20220210184359.235565-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rafael Parra <rparrazo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's misplaced since commit 7960509329 ("mm, memory_hotplug: print
reason for the offlining failure"). Move it to the right place.
Link: https://lkml.kernel.org/r/20220207133643.23427-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use helper macro node_spanned_pages to check whether node spans
pages. And we can change the parameter of check_cpu_on_node to nid as
that's what it really cares. Thus we can further get rid of the local
variable pgdat and improve the readability a bit.
Link: https://lkml.kernel.org/r/20220207133643.23427-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If zid reaches ZONE_NORMAL, the caller will always get the NORMAL zone no
matter what zone_intersects() returns. So we can save some possible cpu
cycles by avoid calling zone_intersects() for ZONE_NORMAL.
Link: https://lkml.kernel.org/r/20220207133643.23427-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "A few cleanup patches around memory_hotplug".
This series contains a few patches to fix obsolete and misplaced comments,
clean up the try_offline_node function and so on.
This patch (of 4):
Since commit f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded
memory to zones until online"), there is no need to pass in the zone.
[akpm@linux-foundation.org: remove the comment altogether, per David]
Link: https://lkml.kernel.org/r/20220207133643.23427-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220207133643.23427-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a !node_online node is brought up it needs a hotplug specific
initialization because the node could be either uninitialized yet or it
could have been recycled after previous hotremove. hotadd_init_pgdat is
responsible for that.
Internal pgdat state is initialized at two places currently
- hotadd_init_pgdat
- free_area_init_core_hotplug
There is no real clear cut what should go where but this patch's chosen to
move the whole internal state initialization into
free_area_init_core_hotplug. hotadd_init_pgdat is still responsible to
pull all the parts together - most notably to initialize zonelists because
those depend on the overall topology.
This patch doesn't introduce any functional change.
Link: https://lkml.kernel.org/r/20220127085305.20890-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to "mm: handle uninitialized numa nodes gracefully" memory hotplug
used to allocate pgdat when memory has been added to a node
(hotadd_init_pgdat) arch_free_nodedata has been only used in the failure
path because once the pgdat is exported (to be visible by NODA_DATA(nid))
it cannot really be freed because there is no synchronization available
for that.
pgdat is allocated for each possible nodes now so the memory hotplug
doesn't need to do the ever use arch_free_nodedata so drop it.
This patch doesn't introduce any functional change.
Link: https://lkml.kernel.org/r/20220127085305.20890-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have had several reports [1][2][3] that page allocator blows up when an
allocation from a possible node is requested. The underlying reason is
that NODE_DATA for the specific node is not allocated.
NUMA specific initialization is arch specific and it can vary a lot. E.g.
x86 tries to initialize all nodes that have some cpu affinity (see
init_cpu_to_node) but this can be insufficient because the node might be
cpuless for example.
One way to address this problem would be to check for !node_online nodes
when trying to get a zonelist and silently fall back to another node.
That is unfortunately adding a branch into allocator hot path and it
doesn't handle any other potential NODE_DATA users.
This patch takes a different approach (following a lead of [3]) and it pre
allocates pgdat for all possible nodes in an arch indipendent code -
free_area_init. All uninitialized nodes are treated as memoryless nodes.
node_state of the node is not changed because that would lead to other
side effects - e.g. sysfs representation of such a node and from past
discussions [4] it is known that some tools might have problems digesting
that.
Newly allocated pgdat only gets a minimal initialization and the rest of
the work is expected to be done by the memory hotplug - hotadd_new_pgdat
(renamed to hotadd_init_pgdat).
generic_alloc_nodedata is changed to use the memblock allocator because
neither page nor slab allocators are available at the stage when all
pgdats are allocated. Hotplug doesn't allocate pgdat anymore so we can
use the early boot allocator. The only arch specific implementation is
ia64 and that is changed to use the early allocator as well.
[1] http://lkml.kernel.org/r/20211101201312.11589-1-amakhalov@vmware.com
[2] http://lkml.kernel.org/r/20211207224013.880775-1-npache@redhat.com
[3] http://lkml.kernel.org/r/20190114082416.30939-1-mhocko@kernel.org
[4] http://lkml.kernel.org/r/20200428093836.27190-1-srikar@linux.vnet.ibm.com
[akpm@linux-foundation.org: replace comment, per Mike]
Link: https://lkml.kernel.org/r/Yfe7RBeLCijnWBON@dhcp22.suse.cz
Reported-by: Alexey Makhalov <amakhalov@vmware.com>
Tested-by: Alexey Makhalov <amakhalov@vmware.com>
Reported-by: Nico Pache <npache@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Tested-by: Rafael Aquini <raquini@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
