- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Initialize perf_cap struct to avoid warning:
CC hfi-events.o
In function ‘process_hfi_event’,
inlined from ‘handle_event’ at hfi-events.c:220:5:
hfi-events.c:184:9: warning: ‘perf_cap.cpu’ may be used
uninitialized [-Wmaybe-uninitialized]
184 | process_level_change(perf_cap->cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hfi-events.c: In function ‘handle_event’:
hfi-events.c:193:25: note: ‘perf_cap.cpu’ was declared here
193 | struct perf_cap perf_cap;
| ^~~~~~~~
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171208.211319-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For Intel SST turbo-freq feature to be enabled, the turbo mode on the
platform must be enabled also. If turbo mode is disabled, display error
while enabling turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023421.3930540-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Don't exit if used this way:
sudo setcap cap_sys_nice,cap_sys_rawio=+ep ./turbostat
sudo chmod +r /dev/cpu/*/msr
./turbostat
note: cap_sys_admin is now also needed for the perf IPC counter:
sudo setcap cap_sys_admin,cap_sys_nice,cap_sys_rawio=+ep ./turbostat
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Toby Broom <tbroom@outlook.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The turbostat data is collected by end user for power evaluationit. However
it looks like we are missing enough thermal context there. Already a couple of
time we found that power management developer asking something like this:
grep -r . /sys/devices/system/cpu/cpu*/thermal_throttle/*
Print the per core thermal throttle count so as to get suffificent thermal
context.
turbostat -i 5 -s Core,CPU,CoreThr
Core CPU CoreThr
- - 104
0 0 61
0 4
1 1 0
1 5
2 2 104
2 6
3 3 7
3 7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This gives the ability to reprint the header every N iterations, so you
can ensure that a scrolling display always has the header visible
somewhere on the screen.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there are a number of variables which are displayed by
default, enabled with -e all, and listed by --list, but which you can
not give to --enable/-e.
So you can enable CPU0c1 (in the bic array), but you can't enable C1 or
C1% (not in the bic array, but exists in sysfs).
This runs counter to both the documentation and user expectations, and
it's just not very user friendly.
As such, the mechanism used by --hide has been duplicated, and is now
also used by --enable, so we can handle unknown names gracefully.
Note: One impact of this is that truly unknown fields given to --enable
will no longer generate errors, they will be silently ignored, as --hide
does.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Print power values upto three decimal places in watts.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat --Dump exits early with status 243 (-13)
get_counters() calls get_msr_sum() on zen CPUS
for MSR_PKG_ENERGY_STAT, but per_cpu_msr_sum
has not been initialized.
Signed-off-by: Dan Merillat <git@dan.eginity.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Build of intel-speed-select will fail if you run:
$ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1
...
gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select
/usr/bin/ld: intel-speed-select-in.o: in function `handle_event':
(...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr'
...
In this case the problem is that order when linking matters when using
the flag -Wl,--as-needed, symbols not used at that point are discarded.
So since intel-speed-select-in.o comes after, at that point the
libraries/symbols are already discarded and then missing/undefined
references are reported.
To fix this, make sure we specify LDFLAGS after the object file.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user
space via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform
and fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's
Tsens driver and TI thermal platforms (Dmitry Baryshkov, Romain
Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT
binding (Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt
is optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=6PYL
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
Intel P-state tracer is a useful tool to tune and debug Intel P-state
driver. AMD P-state tracer import intel pstate tracer. This tool can
be used to analyze the performance of AMD P-state tracer.
Now CPU frequency, load and desired perf can be traced.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate_tracer as a module. Other trace event can import
this module to analyze their trace data.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'MSR_PKG_CST_CONFIG_CONTROL' encodes the deepest allowed package C-state limit,
and turbostat decodes it.
Before this patch: turbostat does not recognize value "3" on Ice Lake Xeon
(ICX) and Sapphire Rapids Xeon (SPR), treats it as "unknown", and does not
display any package C-states in the results table.
After this patch: turbostat recognizes value 3 on ICX and SPR, treats it as
"PC6", and correctly displays package C-states in the results table.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This version allows out of band SST support, where some remote agent
changes SST profiles via some Board Management Controller.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Read HFI (Hardware Feedback Interface) events to process config level
changes in oob mode. When HFI is supported there is no need for polling
to check config level change.
Subscribe to Linux thermal netlink messages and process message:
THERMAL_GENL_EVENT_CPU_CAPABILITY_CHANGE.
This message contains cpu number, performance and energy efficiency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
It is possible that some out of band agent changed config level. In this
case CPUs need to be online/offline to support this config change. Add
a command line option --oob, so that this tool can run as daemon and poll
for config level change and take action. The poll interval is configurable
in seconds using config option --poll-interval.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
This release adds following change:
- Update max performance when BIOS disabled turbo
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.
In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This release adds following change:
- Fix reporting of memory frequency
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The uncore memory frequency value from the mailbox command
CONFIG_TDP_GET_MEM_FREQ needs to be scaled based on the platform for
display. There is no single constant multiplier.
This change introduces CPU model specific memory frequency multiplier.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull turbostat updates from Len Brown:
"Bug fixes and a smattering of features"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (21 commits)
tools/power turbostat: version 2021.05.04
tools/power turbostat: Support "turbostat --hide idle"
tools/power turbostat: elevate priority of interval mode
tools/power turbostat: formatting
tools/power turbostat: rename tcc variables
tools/power turbostat: add TCC Offset support
tools/power turbostat: save original CPU model
tools/power turbostat: Fix Core C6 residency on Atom CPUs
tools/power turbostat: Print the C-state Pre-wake settings
tools/power turbostat: Enable tsc_tweak for Elkhart Lake and Jasper Lake
tools/power turbostat: unmark non-kernel-doc comment
tools/power/turbostat: Remove Package C6 Retention on Ice Lake Server
tools/power turbostat: Fix offset overflow issue in index converting
tools/power/turbostat: Fix turbostat for AMD Zen CPUs
tools/power turbostat: update version number
tools/power turbostat: Fix DRAM Energy Unit on SKX
Revert "tools/power turbostat: adjust for temperature offset"
tools/power turbostat: Support Ice Lake D
tools/power turbostat: Support Alder Lake Mobile
tools/power turbostat: print microcode patch level
...
As idle, in particular, can have many columns on some machines...
Make it easy to ignore them all at once.
Signed-off-by: Len Brown <len.brown@intel.com>
There are two TCC activation temeprature.
One is the default TCC activation temperature, also known as TJ_MAX.
Another one is the effective TCC activation temperature, which is the
subtraction of default TCC activation temperature and TCC offset.
The name of variable tcc_activation_temp might be misleading here.
Thus rename tcc_activation_temp to tj_max, and use tcc_default and
tcc_offset to calculate the effective TCC activation temperature.
No functional change in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The length of TCC Offset bits varies on different platforms.
Decode TCC Offset bits only for the platforms that we have verified.
For the others, only show default TCC activation temperature.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
CPU model may get changed in intel_model_duplicates() for code reuse.
But there are still some cases we need the original CPU model to handle
minor differences between generations.
Thus save the original CPU model.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
For Atom CPUs that have core cstate deeper than C6,
MSR_CORE_C6_RESIDENCY actually returns the residency for both CC6 and
deeper Core cstates.
Thus, the real Core C6 residency should be the subtraction of
MSR_CORE_C6_RESIDENCY return value and MSR_CORE_C6_RESIDENCY return value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
C-state pre-wake setting[1] is an optimization for some Intel CPUs to
be woken up from deep C-states in order to reduce latency. According to
the spec, the BIT30 is the C-state Pre-wake Disable. Expose this setting
accordingly.
Sample output from turbostat:
...
cpu51: MSR_IA32_POWER_CTL: 0x1a00a40059 (C1E auto-promotion: DISabled)
C-state Pre-wake: ENabled
cpu51: MSR_TURBO_RATIO_LIMIT: 0x2021212121212224
...
[1] https://intel.github.io/wult/#c-state-pre-wake
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It was found that on Elkhart Lake the TSC frequency is driven by
a separate crystal-clock domain, which is different from the
BCLK domain which includes mperf. This has result in small different
speed thus inconsistence between TSC and the mperf, which caused the
Busy% to be higher than 100%. On this platform it seems that the mperf
runs faster than tsc when the CPU is 100% utilized:
delta tsc(18815473183) < delta mperf(18958403680) for 10 seconds.
To align TSC with mperf, leverage the tsc_tweak mechanism introduced for
cores newer than Skylake, so that TSC and mperf would be calculated in
the same domain.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Do not mark a comment as kernel-doc notation when it is not
meant to be in kernel-doc notation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently the turbostat treats ICX the same way as SKX and shares the
code among them. But one difference is that ICX does not support Package
C6 Retention, unlike SKX and CLX.
So this patch:
1. Splitting SKX and ICX in turbostat.
2. Removing Package C6 Rentention for ICX.
And after this split, it would be easier to cutomize Ice Lake Server
in turbostat in the future.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The idx_to_offset() function returns type int (32-bit signed), but
MSR_PKG_ENERGY_STAT is u32 and would be interpreted as a negative number.
The end result is that it hits the if (offset < 0) check in update_msr_sum()
which prevents the timer callback from updating the stat in the background when
long durations are used. The similar issue exists in offset_to_idx() and
update_msr_sum(). Fix this issue by converting the 'int' to 'off_t' accordingly.
Fixes: 9972d5d84d ("tools/power turbostat: Enable accumulate RAPL display")
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
It was reported that on Zen+ system turbostat started exiting,
which was tracked down to the MSR_PKG_ENERGY_STAT read failing because
offset_to_idx wasn't returning a non-negative index.
This patch combined the modification from Bingsong Si and
Bas Nieuwenhuizen and addd the MSR to the index system as alternative for
MSR_PKG_ENERGY_STATUS.
Fixes: 9972d5d84d ("tools/power turbostat: Enable accumulate RAPL display")
Reported-by: youling257 <youling257@gmail.com>
Tested-by: youling257 <youling257@gmail.com>
Tested-by: Kurt Garloff <kurt@garloff.de>
Tested-by: Bingsong Si <owen.si@ucloud.cn>
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Co-developed-by: Bingsong Si <owen.si@ucloud.cn>
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This reverts commit 6ff7cb371c.
Apparently the TCC offset should not be used to adjust what temperature
we show the user after all.
(on most systems, TCC offset is 0, FWIW)
Fixes: 6ff7cb371c
Signed-off-by: Len Brown <len.brown@intel.com>
Ice Lake D is low-end server version of Ice Lake X, reuse
the code accordingly.
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Share the code between Alder Lake Mobile and Alder Lake Desktop.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
