VXLAN-GPE does not add an extra inner Ethernet header. Take that into
account when calculating header length.
This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is
cached.
In the collect_md mode (which is the only mode that VXLAN-GPE
supports), there's no magic auto-setting of the tunnel interface MTU.
It can't be, since the destination and thus the underlying interface
may be different for each packet.
So, the administrator is responsible for setting the correct tunnel
interface MTU. Apparently, the administrators are capable enough to
calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36).
They set the tunnel interface MTU to 1464. If you run a TCP stream over
such interface, it's then segmented according to the MTU 1464, i.e.
producing 1514 bytes frames. Which is okay, this still fits the lower
MTU.
However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as
the header size and thus incorrectly calculates the frame size to be
1528. This leads to ICMP too big message being generated (locally),
PMTU of 1450 to be cached and the TCP stream to be resegmented.
The fix is to use the correct actual header size, especially for
skb_tunnel_check_pmtu calculation.
Fixes: e1e5314de0 ("vxlan: implement GPE")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a packet needs to be encapsulated towards a local destination IP, the
packet will undergo a "local bypass" and be injected into the Rx path as
if it was received by the target VXLAN device without undergoing
encapsulation. If such a device does not exist, the packet will be
dropped.
There are scenarios where we do not want to perform such a bypass, but
instead want the packet to be encapsulated and locally received by a
user space program for post-processing.
To that end, add a new VXLAN device attribute that controls whether a
"local bypass" is performed or not. Default to performing a bypass to
maintain existing behavior.
Signed-off-by: Vladimir Nikishkin <vladimir@nikishkin.pw>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function vxlan_build_gbp_hdr will be used by other modules to build
gbp option in vxlan header according to gbp flags.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an internal flag to indicate whether MDB entries are configured or
not. Set the flag after installing the first MDB entry and clear it
before deleting the last one.
The flag will be consulted by the data path which will only perform an
MDB lookup if the flag is set, thereby keeping the MDB overhead to a
minimum when the MDB is not used.
Another option would have been to use a static key, but it is global and
not per-device, unlike the current approach.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement MDB control path support, enabling the creation, deletion,
replacement and dumping of MDB entries in a similar fashion to the
bridge driver. Unlike the bridge driver, each entry stores a list of
remote VTEPs to which matched packets need to be replicated to and not a
list of bridge ports.
The motivating use case is the installation of MDB entries by a user
space control plane in response to received EVPN routes. As such, only
allow permanent MDB entries to be installed and do not implement
snooping functionality, avoiding a lot of unnecessary complexity.
Since entries can only be modified by user space under RTNL, use RTNL as
the write lock. Use RCU to ensure that MDB entries and remotes are not
freed while being accessed from the data path during transmission.
In terms of uAPI, reuse the existing MDB netlink interface, but add a
few new attributes to request and response messages:
* IP address of the destination VXLAN tunnel endpoint where the
multicast receivers reside.
* UDP destination port number to use to connect to the remote VXLAN
tunnel endpoint.
* VXLAN VNI Network Identifier to use to connect to the remote VXLAN
tunnel endpoint. Required when Ingress Replication (IR) is used and
the remote VTEP is not a member of originating broadcast domain
(VLAN/VNI) [1].
* Source VNI Network Identifier the MDB entry belongs to. Used only when
the VXLAN device is in external mode.
* Interface index of the outgoing interface to reach the remote VXLAN
tunnel endpoint. This is required when the underlay destination IP is
multicast (P2MP), as the multicast routing tables are not consulted.
All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest
which is strictly validated by the bridge driver, thereby automatically
rejecting the new attributes.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per-vni statistics for vni filter mode. Counting Rx/Tx
bytes/packets/drops/errors at the appropriate places.
This patch changes vxlan_vs_find_vni to also return the
vxlan_vni_node in cases where the vni belongs to a vni
filtering vxlan device
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds vnifiltering support to collect metadata device.
Motivation:
You can only use a single vxlan collect metadata device for a given
vxlan udp port in the system today. The vxlan collect metadata device
terminates all received vxlan packets. As shown in the below diagram,
there are use-cases where you need to support multiple such vxlan devices in
independent bridge domains. Each vxlan device must terminate the vni's
it is configured for.
Example usecase: In a service provider network a service provider
typically supports multiple bridge domains with overlapping vlans.
One bridge domain per customer. Vlans in each bridge domain are
mapped to globally unique vxlan ranges assigned to each customer.
vnifiltering support in collect metadata devices terminates only configured
vnis. This is similar to vlan filtering in bridge driver. The vni filtering
capability is provided by a new flag on collect metadata device.
In the below pic:
- customer1 is mapped to br1 bridge domain
- customer2 is mapped to br2 bridge domain
- customer1 vlan 10-11 is mapped to vni 1001-1002
- customer2 vlan 10-11 is mapped to vni 2001-2002
- br1 and br2 are vlan filtering bridges
- vxlan1 and vxlan2 are collect metadata devices with
vnifiltering enabled
┌──────────────────────────────────────────────────────────────────┐
│ switch │
│ │
│ ┌───────────┐ ┌───────────┐ │
│ │ │ │ │ │
│ │ br1 │ │ br2 │ │
│ └┬─────────┬┘ └──┬───────┬┘ │
│ vlans│ │ vlans │ │ │
│ 10,11│ │ 10,11│ │ │
│ │ vlanvnimap: │ vlanvnimap: │
│ │ 10-1001,11-1002 │ 10-2001,11-2002 │
│ │ │ │ │ │
│ ┌──────┴┐ ┌──┴─────────┐ ┌───┴────┐ │ │
│ │ swp1 │ │vxlan1 │ │ swp2 │ ┌┴─────────────┐ │
│ │ │ │ vnifilter:│ │ │ │vxlan2 │ │
│ └───┬───┘ │ 1001,1002│ └───┬────┘ │ vnifilter: │ │
│ │ └────────────┘ │ │ 2001,2002 │ │
│ │ │ └──────────────┘ │
│ │ │ │
└───────┼──────────────────────────────────┼───────────────────────┘
│ │
│ │
┌─────┴───────┐ │
│ customer1 │ ┌─────┴──────┐
│ host/VM │ │customer2 │
└─────────────┘ │ host/VM │
└────────────┘
With this implementation, vxlan dst metadata device can
be associated with range of vnis.
struct vxlan_vni_node is introduced to represent
a configured vni. We start with vni and its
associated remote_ip in this structure. This
structure can be extended to bring in other
per vni attributes if there are usecases for it.
A vni inherits an attribute from the base vxlan device
if there is no per vni attributes defined.
struct vxlan_dev gets a new rhashtable for
vnis called vxlan_vni_group. vxlan_vnifilter.c
implements the necessary netlink api, notifications
and helper functions to process and manage lifecycle
of vxlan_vni_node.
This patch also adds new helper functions in vxlan_multicast.c
to handle per vni remote_ip multicast groups which are part
of vxlan_vni_group.
Fix build problems:
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add macro definition for number of IANA VXLAN-GPE port for generic use.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So we'd better do the mask when set it in act_tunnel_key and cls_flower.
Otherwise, when users don't know these bits, they may configure with a
value which can never be matched.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Todays vxlan mac fdb entries can point to multiple remote
ips (rdsts) with the sole purpose of replicating
broadcast-multicast and unknown unicast packets to those remote ips.
E-VPN multihoming [1,2,3] requires bridged vxlan traffic to be
load balanced to remote switches (vteps) belonging to the
same multi-homed ethernet segment (E-VPN multihoming is analogous
to multi-homed LAG implementations, but with the inter-switch
peerlink replaced with a vxlan tunnel). In other words it needs
support for mac ecmp. Furthermore, for faster convergence, E-VPN
multihoming needs the ability to update fdb ecmp nexthops independent
of the fdb entries.
New route nexthop API is perfect for this usecase.
This patch extends the vxlan fdb code to take a nexthop id
pointing to an ecmp nexthop group.
Changes include:
- New NDA_NH_ID attribute for fdbs
- Use the newly added fdb nexthop groups
- makes vxlan rdsts and nexthop handling code mutually
exclusive
- since this is a new use-case and the requirement is for ecmp
nexthop groups, the fdb add and update path checks that the
nexthop is really an ecmp nexthop group. This check can be relaxed
in the future, if we want to introduce replication fdb nexthop groups
and allow its use in lieu of current rdst lists.
- fdb update requests with nexthop id's only allowed for existing
fdb's that have nexthop id's
- learning will not override an existing fdb entry with nexthop
group
- I have wrapped the switchdev offload code around the presence of
rdst
[1] E-VPN RFC https://tools.ietf.org/html/rfc7432
[2] E-VPN with vxlan https://tools.ietf.org/html/rfc8365
[3] http://vger.kernel.org/lpc_net2018_talks/scaling_bridge_fdb_database_slidesV3.pdf
Includes a null check fix in vxlan_xmit from Nikolay
v2 - Fixed build issue:
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IN_MULTICAST's primary intent is as a uapi macro.
Elsewhere in the kernel we use ipv4_is_multicast consistently.
This patch unifies linux's multicast checks to use that function
rather than this macro.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The monolithic hash_lock could cause huge contention when
inserting/deletiing vxlan_fdbs into the fdb_head.
Use FDB_HASH_SIZE hash_locks to protect insertions/deletions
of vxlan_fdbs into the fdb_head hash table.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Litao jiao <jiaolitao@raisecom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added IANA_VXLAN_UDP_PORT (4789) definition to vxlan header file so it
can be used by drivers instead of local definition.
Updated drivers which locally defined it as 4789 to use it.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Cc: John Hurley <john.hurley@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Cc: Peng Li <lipeng321@huawei.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch adds extack coverage in vxlan link
create and changelink paths. Introduces a new helper
vxlan_nl2flags to consolidate flag attribute validation.
thanks to Johannes Berg for some tips to construct the
generic vxlan flag extack strings.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are four sources of VXLAN switchdev notifier calls:
- the changelink() link operation, which already supports extack,
- ndo_fdb_add() which got extack support in a previous patch,
- FDB updates due to packet forwarding,
- and vxlan_fdb_replay().
Extend vxlan_fdb_switchdev_call_notifiers() to include extack in the
switchdev message that it sends, and propagate the argument upwards to
the callers. For the first two cases, pass in the extack gotten through
the operation. For case #3, pass in NULL.
To cover the last case, extend vxlan_fdb_replay() to take extack
argument, which might come from whatever operation necessitated the FDB
replay.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a driver unoffloads all FDB entries en bloc, it's inefficient to
send the switchdev notification one by one. Add a helper that walks the
FDB table, unsetting the offload flag on RDST with a given VNI.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VXLAN device becomes relevant to a driver (such as when it is
attached to an offloaded bridge), the driver will generally need to walk
the existing FDB entries and offload them.
Add a function vxlan_fdb_replay() to call a given notifier block for
each FDB entry with a given VNI.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VXLAN driver needs to differentiate between FDB entries learned by
the VXLAN driver, and those added by the user. The latter ones shouldn't
be taken over by external learning events. This is in accordance with
bridge behavior.
Therefore, extend the flags bitfield to 16 bits and add a new private
NTF flag to mark the user-added entries.
This seems preferable to adding a dedicated boolean, because passing the
flag, unlike passing e.g. a true, makes it clear what the meaning of the
bit is.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.
For IPv4, inheriting DF from the inner header was probably intended from
the very beginning judging by the comment to vxlan_xmit(), but it wasn't
actually implemented -- also because it would have done more harm than
good, without handling for ICMP Fragmentation Needed messages.
According to RFC 7348, "Path MTU discovery MAY be used". An expired RFC
draft, draft-saum-nvo3-pmtud-over-vxlan-05, whose purpose was to describe
PMTUD implementation, says that "is a MUST that Vxlan gateways [...]
SHOULD set the DF-bit [...]", whatever that means.
Given this background, the only sane option is probably to let the user
decide, and keep the current behaviour as default.
This only applies to non-lwt tunnels: if an external control plane is
used, tunnel key will still control the DF flag.
v2:
- DF behaviour configuration only applies for non-lwt tunnels, move DF
setting to if (!info) block in vxlan_xmit_one() (Stephen Hemminger)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloaded bridge FDB entries are marked with NTF_OFFLOADED. Implement a
similar mechanism for VXLAN, where a given remote destination can be
marked as offloaded.
To that end, introduce a new event, SWITCHDEV_VXLAN_FDB_OFFLOADED,
through which the marking is communicated to the vxlan driver. To
identify which RDST should be marked as offloaded, an
switchdev_notifier_vxlan_fdb_info is passed to the listeners. The
"offloaded" flag in that object determines whether the offloaded mark
should be set or cleared.
When sending offloaded FDB entries over netlink, mark them with
NTF_OFFLOADED.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A switchdev-capable driver that is aware of VXLAN may need to query
VXLAN FDB. In the particular case of mlxsw, this functionality is
limited to querying UC FDBs. Those being easier to deal with than the
general case of RDST chain traversal, introduce an interface to query
specifically UC FDBs: vxlan_fdb_find_uc().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When offloading VXLAN devices, drivers need to know about events in
VXLAN FDB database. Since VXLAN models a bridge, it is natural to
distribute the VXLAN FDB notifications using the pre-existing switchdev
notification mechanism.
To that end, introduce two new notification types:
SWITCHDEV_VXLAN_FDB_ADD_TO_DEVICE and SWITCHDEV_VXLAN_FDB_DEL_TO_DEVICE.
Introduce a new function, vxlan_fdb_switchdev_call_notifiers() to send
the new notifier types, and a struct switchdev_notifier_vxlan_fdb_info
to communicate the details of the FDB entry under consideration.
Invoke the new function from vxlan_fdb_notify().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to determine whether a netdev is a VxLAN netdev by
calling the above mentioned function that checks the netdev's
rtnl_link_ops.
This will allow modules to identify netdev events involving a VxLAN
netdev and act accordingly. For example, drivers capable of VxLAN
offload will need to configure the underlying device when a VxLAN netdev
is being enslaved to an offloaded bridge.
Convert nfp to use the newly introduced helper.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers that support VxLAN offload need to be able to sanitize the
configuration of the VxLAN device and accept / reject its offload.
For example, mlxsw requires that the local IP of the VxLAN device be set
and that packets be flooded to unicast IP(s) and not to a multicast
group.
Expose the functions that perform such checks.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like tos inherit, ttl inherit should also means inherit the inner protocol's
ttl values, which actually not implemented in vxlan yet.
But we could not treat ttl == 0 as "use the inner TTL", because that would be
used also when the "ttl" option is not specified and that would be a behavior
change, and breaking real use cases.
So add a different attribute IFLA_VXLAN_TTL_INHERIT when "ttl inherit" is
specified with ip cmd.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The trailing semicolon is an empty statement that does no operation.
It is completely stripped out by the compiler. Removing it since it doesn't do
anything.
Fixes: 5f35227ea3 ("net: Generalize ndo_gso_check to ndo_features_check")
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix indentation of reserved_flags2 field in vxlanhdr_gpe.
Fixes: e1e5314de0 ("vxlan: implement GPE")
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The values are shared between VXLAN-GPE and NSH. Originally probably by
coincidence but I notified both working groups about this last year and they
seem to keep the values in sync since then.
Hopefully they'll get a single IANA registry for the values, too. (I asked
them for that.)
Factor out the code to be shared by the NSH implementation.
NSH and MPLS values are added in this patch, too. For MPLS, the drafts
incorrectly assign only a single value, while we have two MPLS ethertypes.
I raised the problem with both groups. For now, I assume the value is for
unicast.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not a good idea to add the same hlist_node to two different hash lists.
This leads to various hard to debug memory corruptions.
Fixes: b1be00a6c3 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Multicast addresses are never valid as local address
* Link-local IPv6 unicast addresses may only be used as remote when the
local address is link-local as well
* Don't allow link-local IPv6 local/remote addresses without interface
We also store in the flags field if link-local addresses are used for the
follow-up patches that actually make VXLAN over link-local IPv6 work.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no good reason to keep the flags twice in vxlan_dev and
vxlan_config.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When vxlan device is closed vxlan socket is freed. This
operation can race with vxlan-xmit function which
dereferences vxlan socket. Following patch uses RCU
mechanism to avoid this situation.
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add utility functions to convert a 32 bits key into a 64 bits tunnel and
vice versa.
These functions will be used instead of cloning code in GRE and VXLAN,
and in tc act_iptunnel which will be introduced in a following patch in
this patchset.
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have all the drivers using udp_tunnel_get_rx_ports,
ndo_add_udp_enc_rx_port, and ndo_del_udp_enc_rx_port we can drop the
function calls that were specific to VXLAN and GENEVE.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch merges the notifiers for VXLAN and GENEVE into a single UDP
tunnel notifier. The idea is that we will want to only have to make one
notifier call to receive the list of ports for VXLAN and GENEVE tunnels
that need to be offloaded.
In addition we add a new set of ndo functions named ndo_udp_tunnel_add and
ndo_udp_tunnel_del that are meant to allow us to track the tunnel meta-data
such as port and address family as tunnels are added and removed. The
tunnel meta-data is now transported in a structure named udp_tunnel_info
which for now carries the type, address family, and port number. In the
future this could be updated so that we can include a tuple of values
including things such as the destination IP address and other fields.
I also ended up going with a naming scheme that consisted of using the
prefix udp_tunnel on function names. I applied this to the notifier and
ndo ops as well so that it hopefully points to the fact that these are
primarily used in the udp_tunnel functions.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch makes it so that we add udp_tunnel.h to vxlan.h and geneve.h
header files. This is useful as I plan to move the generic handlers for
the port offloads into the udp_tunnel header file and leave the vxlan and
geneve headers to be a bit more protocol specific.
I also went through and cleaned out a number of redundant includes that
where in the .h and .c files for these drivers.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/ipv4/ip_gre.c
Minor conflicts between tunnel bug fixes in net and
ipv6 tunnel cleanups in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to perform an additional check on the inner headers to determine if
we can offload the checksum for them. Previously this check didn't occur
so we would generate an invalid frame in the case of an IPv6 header
encapsulated inside of an IPv4 tunnel. To fix this I added a secondary
check to vxlan_features_check so that we can verify that we can offload the
inner checksum.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently all drivers depend and autoload the vxlan module because how
vxlan_get_rx_port is linked into them. Remove this dependency:
By using a new event type in the netdevice notifier call chain we proxy
the request from the drivers to flush and resetup the vxlan ports not
directly via function call but by the already existing netdevice
notifier call chain.
I added a separate new event type, NETDEV_OFFLOAD_PUSH_VXLAN, to do so.
We don't need to save those ids, as the event type field is an unsigned
long and using specialized event types for this purpose seemed to be a
more elegant way. This also comes in beneficial if in future we want to
add offloading knobs for vxlan.
Cc: Jesse Gross <jesse@kernel.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the fact that the udp socket is destructed asynchronously in a
work queue, we have some nondeterministic behavior during shutdown of
vxlan tunnels and creating new ones. Fix this by keeping the destruction
process synchronous in regards to the user space process so IFF_UP can
be reliably set.
udp_tunnel_sock_release destroys vs->sock->sk if reference counter
indicates so. We expect to have the same lifetime of vxlan_sock and
vxlan_sock->sock->sk even in fast paths with only rcu locks held. So
only destruct the whole socket after we can be sure it cannot be found
by searching vxlan_net->sock_list.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adapt vxlan_gro_receive, vxlan_gro_complete to take a socket argument.
Set these functions in tunnel_config. Don't set udp_offloads any more.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement VXLAN-GPE. Only COLLECT_METADATA is supported for now (it is
possible to support static configuration, too, if there is demand for it).
The GPE header parsing has to be moved before iptunnel_pull_header, as we
need to know the protocol.
v2: Removed what was called "L2 mode" in v1 of the patchset. Only "L3 mode"
(now called "raw mode") is added by this patch. This mode does not allow
Ethernet header to be encapsulated in VXLAN-GPE when using ip route to
specify the encapsulation, IP header is encapsulated instead. The patch
does support Ethernet to be encapsulated, though, using ETH_P_TEB in
skb->protocol. This will be utilized by other COLLECT_METADATA users
(openvswitch in particular).
If there is ever demand for Ethernet encapsulation with VXLAN-GPE using
ip route, it's easy to add a new flag switching the interface to
"Ethernet mode" (called "L2 mode" in v1 of this patchset). For now,
leave this out, it seems we don't need it.
Disallowed more flag combinations, especially RCO with GPE.
Added comment explaining that GBP and GPE cannot be set together.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparse reports false positives for the header manipulation inlines. Annotate
them correctly.
Tested by sparse on a little endian and big endian machine.
Fixes: 54bfd872bf ("vxlan: keep flags and vni in network byte order")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
