Commit Graph

3706 Commits

Author SHA1 Message Date
Linus Torvalds
bb41fe35dc Char/Misc and other driver subsystem updates for 6.9-rc1
Here is the big set of char/misc and a number of other driver subsystem
 updates for 6.9-rc1.  Included in here are:
   - IIO driver updates, loads of new ones and evolution of existing ones
   - coresight driver updates
   - const cleanups for many driver subsystems
   - speakup driver additions
   - platform remove callback void cleanups
   - mei driver updates
   - mhi driver updates
   - cdx driver updates for MSI interrupt handling
   - nvmem driver updates
   - other smaller driver updates and cleanups, full details in the
     shortlog
 
 All of these have been in linux-next for a long time with no reported
 issue, other than a build warning with some older versions of gcc for a
 speakup driver, fix for that will come in a few days when I catch up
 with my pending patch queues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwuLg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynKVACgjvR1cD8NYk9PcGWc9ZaXAZ6zSnwAn260kMoe
 lLFtwszo7m0N6ZULBWBd
 =y3yz
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and a number of other driver
  subsystem updates for 6.9-rc1. Included in here are:

   - IIO driver updates, loads of new ones and evolution of existing ones

   - coresight driver updates

   - const cleanups for many driver subsystems

   - speakup driver additions

   - platform remove callback void cleanups

   - mei driver updates

   - mhi driver updates

   - cdx driver updates for MSI interrupt handling

   - nvmem driver updates

   - other smaller driver updates and cleanups, full details in the
    shortlog

  All of these have been in linux-next for a long time with no reported
  issue, other than a build warning for the speakup driver"

The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.

Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/

* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
  binder: remove redundant variable page_addr
  uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
  uio_pruss: UIO_MEM_DMA_COHERENT conversion
  cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
  uio: introduce UIO_MEM_DMA_COHERENT type
  cdx: add MSI support for CDX bus
  pps: use cflags-y instead of EXTRA_CFLAGS
  speakup: Add /dev/synthu device
  speakup: Fix 8bit characters from direct synth
  parport: sunbpp: Convert to platform remove callback returning void
  parport: amiga: Convert to platform remove callback returning void
  char: xillybus: Convert to platform remove callback returning void
  vmw_balloon: change maintainership
  MAINTAINERS: change the maintainer for hpilo driver
  char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
  hpet: remove hpets::hp_clocksource
  platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
  char: xilinx_hwicap: drop casting to void in dev_set_drvdata
  greybus: move is_gb_* functions out of greybus.h
  greybus: Remove usage of the deprecated ida_simple_xx() API
  ...
2024-03-21 13:21:31 -07:00
Linus Torvalds
e09bf86f3d USB/Thunderbolt changes for 6.9-rc1
Here is the big set of USB and Thunderbolt changes for 6.9-rc1.  Lots of
 tiny changes and forward progress to support new hardware and better
 support for existing devices.  Included in here are:
   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware
   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on
   - USB typec updates and enhancements
   - usual dwc3 driver updates
   - usual xhci driver updates
   - function USB (i.e. gadget) driver updates and additions
   - new device ids for lots of drivers
   - loads of other small updates, full details in the shortlog
 
 All of these, including a "last minute regression fix" have been in
 linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwpzA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymS9QCdEuF6KJFLOrDrGS4NbZNSUPIVF6oAn350r4NX
 CMZah37Dfr1VDCOOV4gQ
 =HACL
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...
2024-03-21 12:35:20 -07:00
Linus Torvalds
c5d9ab85eb f2fs update for 6.9-rc1
In this round, there are a number of updates on mainly two areas: Zoned block
 device support and Per-file compression. For example, we've found several issues
 to support Zoned block device especially having large sections regarding to GC
 and file pinning used for Android devices. In compression side, we've fixed many
 corner race conditions that had broken the design assumption.
 
 Enhancement:
  - Support file pinning for Zoned block device having large section
  - Enhance the data recovery after sudden power cut on Zoned block device
  - Add more error injection cases to easily detect the kernel panics
  - add a proc entry show the entire disk layout
  - Improve various error paths paniced by BUG_ON in block allocation and GC
  - support SEEK_DATA and SEEK_HOLE for compression files
 
 Bug fix:
  - fix to avoid use-after-free issue in f2fs_filemap_fault
  - fix some race conditions to break the atomic write design assumption
  - fix to truncate meta inode pages forcely
  - resolve various per-file compression issues wrt the space management and
    compression policies
  - fix some swap-related bugs
 
 In addition, we removed deprecated codes such as io_bits and heap_allocation,
 and also fixed minor error handling routines with neat debugging messages.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmX4gS0ACgkQQBSofoJI
 UNLmgBAAg4mvbWjmJ5VbXs4zGLOgLRJYcY1sZRO5Ufg4LhWzoGRxL1Dru+TELw0t
 1Ck2EQvP91XZ5weA5AZOfWbxcijy4+8L3P8L7ohOShudfACci0wQsx6IaUUWWylC
 ILA4+DkovpZrlu6th12Gj9QAM6TN9gdy3V1VLT5O/KmE1x6Pekwp2hQoIvVJRH5L
 I3KxOf5fTe3oWLvEN6m7yCz/8qGqz8+w0ae90UG0fqi0wVEuZJ99zsVPnuhu6uBo
 riFm2A6ra0I/JqoPyqn2QM6ApItM867ULo9EoyQVgq56Q1w31ENOJXsU9N7N4Wxt
 olgujH1SijkWk9ni57iKtMhR68e3Rs+pVsuNFmJuOPq0HASoggB66QRrVvCgM9JG
 z3D//CB2ONtX2XiKJMiTcX9VqIqrMw6L1eVxEZu0P96C3CS70MoBU69mdSR9Og2S
 5nQXja3yzFhdk3thp6+wAJ3I04ZQkf3qoHZB+0chU2Xl1pV+5NIkBgBsSw8g/TY3
 EIHMfK+TX0SBSNCvkUDEJ+Z8ZRID6tcbAquTSsBr6wxB+F9mq7onEvI8O7xwyH9W
 DU8xhymOE2QUoluNtyW7ww6HK913ripXIenI9LaYJnuj0XeDAcMIoPsgR7AGU5UG
 hshvirFdUdWRMTfXxNNUrvhOWI0qurQSVx+VV6Qb62DGqR5ofOw=
 =Qpvy
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs update from Jaegeuk Kim:
 "In this round, there are a number of updates on mainly two areas:
  Zoned block device support and Per-file compression. For example,
  we've found several issues to support Zoned block device especially
  having large sections regarding to GC and file pinning used for
  Android devices. In compression side, we've fixed many corner race
  conditions that had broken the design assumption.

  Enhancements:
   - Support file pinning for Zoned block device having large section
   - Enhance the data recovery after sudden power cut on Zoned block
     device
   - Add more error injection cases to easily detect the kernel panics
   - add a proc entry show the entire disk layout
   - Improve various error paths paniced by BUG_ON in block allocation
     and GC
   - support SEEK_DATA and SEEK_HOLE for compression files

  Bug fixes:
   - avoid use-after-free issue in f2fs_filemap_fault
   - fix some race conditions to break the atomic write design
     assumption
   - fix to truncate meta inode pages forcely
   - resolve various per-file compression issues wrt the space
     management and compression policies
   - fix some swap-related bugs

  In addition, we removed deprecated codes such as io_bits and
  heap_allocation, and also fixed minor error handling routines with
  neat debugging messages"

* tag 'f2fs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
  f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault
  f2fs: truncate page cache before clearing flags when aborting atomic write
  f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag
  f2fs: prevent atomic write on pinned file
  f2fs: fix to handle error paths of {new,change}_curseg()
  f2fs: unify the error handling of f2fs_is_valid_blkaddr
  f2fs: zone: fix to remove pow2 check condition for zoned block device
  f2fs: fix to truncate meta inode pages forcely
  f2fs: compress: fix reserve_cblocks counting error when out of space
  f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks
  f2fs: add a proc entry show disk layout
  f2fs: introduce SEGS_TO_BLKS/BLKS_TO_SEGS for cleanup
  f2fs: fix to check return value of f2fs_gc_range
  f2fs: fix to check return value __allocate_new_segment
  f2fs: fix to do sanity check in update_sit_entry
  f2fs: fix to reset fields for unloaded curseg
  f2fs: clean up new_curseg()
  f2fs: relocate f2fs_precache_extents() in f2fs_swap_activate()
  f2fs: fix blkofs_end correctly in f2fs_migrate_blocks()
  f2fs: ro: don't start discard thread for readonly image
  ...
2024-03-18 11:26:00 -07:00
Linus Torvalds
02c163e959 cxl for v6.9
- Supplement ACPI HMAT reported memory performance with native CXL
   memory performance enumeration
 
 - Add support for CXL error injection via the ACPI EINJ mechanism
 
 - Cleanup CXL DOE and CDAT integration
 
 - Miscellaneous cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZfSddgAKCRDfioYZHlFs
 Z+QJAQC0DaU/QbziEUFgd6r92nLA9PHLWi2zhjsSjyuJ3kh3IQD+KN0h8IZ+Av05
 EOjLw21+ejwJ2dtCDcy2dlSpS6653wc=
 =czLR
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull CXL updates from Dan Williams:
 "CXL has mechanisms to enumerate the performance characteristics of
  memory devices. Those mechanisms allow Linux to build the equivalent
  of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
  capability is necessary because static ACPI can not represent dynamic
  CXL configurations (and reconfigurations).

  So, building on the v6.8 work to add "Quality of Service" enumeration,
  this update plumbs CXL "access coordinates" (read/write access latency
  and bandwidth) in all the same places that ACPI HMAT feeds similar
  data. Follow-on patches from the -mm side can then use that data to
  feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
  drivers/base/.

  The other feature update this cycle is support for CXL error injection
  via the ACPI EINJ module. That facility enables injection of bus
  protocol errors provided the user knows the magic address values to
  insert in the interface. To hide that magic, and make this easier to
  use, new error injection attributes were added to CXL debugfs. That
  interface injects the errors relative to a CXL object rather than
  require user tooling to know how to lookup and inject RCRB (Root
  Complex Register Block) addresses into the raw EINJ debugfs interface.
  It received some helpful review comments from Tony, but no explicit
  acks from the ACPI side. The primary user visible change for existing
  EINJ users is that they may find that einj.ko was already loaded by
  cxl_core.ko. Previously, einj.ko was only loaded on demand.

  The usual collection of miscellaneous cleanups are also present this
  cycle.

  Summary:

   - Supplement ACPI HMAT reported memory performance with native CXL
     memory performance enumeration

   - Add support for CXL error injection via the ACPI EINJ mechanism

   - Cleanup CXL DOE and CDAT integration

   - Miscellaneous cleanups and fixes"

* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
  Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
  lib/firmware_table: Provide buffer length argument to cdat_table_parse()
  cxl/pci: Get rid of pointer arithmetic reading CDAT table
  cxl/pci: Rename DOE mailbox handle to doe_mb
  cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
  cxl/core: Add CXL EINJ debugfs files
  EINJ, Documentation: Update EINJ kernel doc
  EINJ: Add CXL error type support
  EINJ: Migrate to a platform driver
  cxl/region: Deal with numa nodes not enumerated by SRAT
  cxl/region: Add memory hotplug notifier for cxl region
  cxl/region: Add sysfs attribute for locality attributes of CXL regions
  cxl/region: Calculate performance data for a region
  cxl: Set cxlmd->endpoint before adding port device
  cxl: Move QoS class to be calculated from the nearest CPU
  cxl: Split out host bridge access coordinates
  cxl: Split out combine_coordinates() for common shared usage
  ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
  ACPI: HMAT: Introduce 2 levels of generic port access class
  base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
  ...
2024-03-16 10:04:12 -07:00
Linus Torvalds
c8e7699616 This update includes the following changes:
API:
 
 - Avoid unnecessary copying in scomp for trivial SG lists.
 
 Algorithms:
 
 - Optimise NEON CCM implementation on ARM64.
 
 Drivers:
 
 - Add queue stop/query debugfs support in hisilicon/qm.
 -
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmXxDbcACgkQxycdCkmx
 i6dCzw//dI5CuszRMalZu8fwvh7K48d4GoY/5uuc1vPK6yLyc5dl6CzPsrKhmBGO
 Ip2fUCFoO+ViWl5tw8SjOOEnPRztETrIGlOM5PHOIxRuSA6lbcsdo+EQja4WBDo1
 fGUNaNVW9eY9XsaUw46uwxaicd+xOqRGJURKB2XuzSHACln/QrNy74aVdbc6VhaK
 Jnh4o2blsEh7jcVAK2ahNmmDm739w8C462Go4UIl8xcM693HtjUUFx7TALpI0iC+
 BWxctAV9IzA/siUwztvwwlo+V1KZbjZFD5XfC/erkV0gFs7ll8IcuDFnZ1suMvt2
 Z+6OVhghkkvMJJEl1qKNxVJITOUdXH0yKWqTbEHuFlV7VV+9hjUlWlvRVm7ZIrXf
 ZXi/OpBJRAIBB6fJqy1RAvfIZUR8Dl8i8RKLVawdqFLbB+XCOiIK7a8+5hCKaWsU
 0DVFNCfiJFPIiByzxXV+4Jt/hzxx/qseIbTiUShdoXeHOVWMgH5H255MWJv5qjVy
 aSwgQLX6MlY9Pj+w5cPHAUjOiGjiAa3iKwsbnmo5lszsPl4KR407gaJnV7VI4s6R
 fhqAgIjJ4Ik2lHzQRM89QU2OOogVBPs+FHEkk98lak5CATpjUq97iLbTharAg3dc
 l8FLoSB9+NM+RCbnzUXuOIvoU/okSM4+j6a3xAnLQH6OxBOtk3Y=
 =Uw2R
 -----END PGP SIGNATURE-----

Merge tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:

   - Avoid unnecessary copying in scomp for trivial SG lists

  Algorithms:

   - Optimise NEON CCM implementation on ARM64

  Drivers:

   - Add queue stop/query debugfs support in hisilicon/qm

   - Intel qat updates and cleanups"

* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
  Revert "crypto: remove CONFIG_CRYPTO_STATS"
  crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
  crypto: tcrypt - add ffdhe2048(dh) test
  crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
  crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
  hwrng: hisi - use dev_err_probe
  MAINTAINERS: Remove T Ambarus from few mchp entries
  crypto: iaa - Fix comp/decomp delay statistics
  crypto: iaa - Fix async_disable descriptor leak
  dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
  dt-bindings: crypto: add sam9x7 in Atmel TDES
  dt-bindings: crypto: add sam9x7 in Atmel SHA
  dt-bindings: crypto: add sam9x7 in Atmel AES
  crypto: remove CONFIG_CRYPTO_STATS
  crypto: dh - Make public key test FIPS-only
  crypto: rockchip - fix to check return value
  crypto: jitter - fix CRYPTO_JITTERENTROPY help text
  crypto: qat - make ring to service map common for QAT GEN4
  crypto: qat - fix ring to service map for dcc in 420xx
  crypto: qat - fix ring to service map for dcc in 4xxx
  ...
2024-03-15 14:46:54 -07:00
Linus Torvalds
6ce8b2ce0d fuse update for 6.9
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZfLjeQAKCRDh3BK/laaZ
 PBYQAQDqYZzq91Kn5jdvjaSd+6I/+x7MDLOIP5hPX0HJLuBxWAEAqENoo4Of0GTC
 ltW7DKrQy9E3CMp6VKSLVJPN4BYP9gk=
 =GvOE
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

 - Add passthrough mode for regular file I/O.

   This allows performing read and write (also via memory maps) on a
   backing file without incurring the overhead of roundtrips to
   userspace. For now this is only allowed to privileged servers, but
   this limitation will go away in the future (Amir Goldstein)

 - Fix interaction of direct I/O mode with memory maps (Bernd Schubert)

 - Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)

 - Allow resending queued requests for server crash recovery (Zhao Chen)

 - Misc fixes and cleanups

* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
  fuse: get rid of ff->readdir.lock
  fuse: remove unneeded lock which protecting update of congestion_threshold
  fuse: Fix missing FOLL_PIN for direct-io
  fuse: remove an unnecessary if statement
  fuse: Track process write operations in both direct and writethrough modes
  fuse: Use the high bit of request ID for indicating resend requests
  fuse: Introduce a new notification type for resend pending requests
  fuse: add support for explicit export disabling
  fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
  fuse: fix typo for fuse_permission comment
  fuse: Convert fuse_writepage_locked to take a folio
  fuse: Remove fuse_writepage
  virtio_fs: remove duplicate check if queue is broken
  fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
  fuse: don't unhash root
  fuse: fix root lookup with nonzero generation
  fuse: replace remaining make_bad_inode() with fuse_make_bad()
  virtiofs: drop __exit from virtio_fs_sysfs_exit()
  fuse: implement passthrough for mmap
  fuse: implement splice read/write passthrough
  ...
2024-03-15 09:47:14 -07:00
Dan Williams
ed1ff2fba7 Merge branch 'for-6.9/cxl-einj' into for-6.9/cxl
Pick up documentation build fix for v6.9.
2024-03-14 19:05:27 -07:00
Linus Torvalds
902861e34c - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory.  Series
   "implement "memmap on memory" feature on s390".
 
 - More folio conversions from Matthew Wilcox in the series
 
 	"Convert memcontrol charge moving to use folios"
 	"mm: convert mm counter to take a folio"
 
 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes.  The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".
 
 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.
 
 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools".  Measured improvements are modest.
 
 - zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
   zswap: simplify zswap_swapoff()".
 
 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is hotplugged
   as system memory.
 
 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.
 
 - More DAMON work from SeongJae Park in the series
 
 	"mm/damon: make DAMON debugfs interface deprecation unignorable"
 	"selftests/damon: add more tests for core functionalities and corner cases"
 	"Docs/mm/damon: misc readability improvements"
 	"mm/damon: let DAMOS feeds and tame/auto-tune itself"
 
 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving policy
   wherein we allocate memory across nodes in a weighted fashion rather
   than uniformly.  This is beneficial in heterogeneous memory environments
   appearing with CXL.
 
 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
 
 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".
 
 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format.  Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.
 
 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP".  Mainly
   targeted at arm64, this significantly speeds up fork() when the process
   has a large number of pte-mapped folios.
 
 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP".  It
   implements batching during munmap() and other pte teardown situations.
   The microbenchmark improvements are nice.
 
 - And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
   Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings").  Kernel build times on arm64 improved nicely.  Ryan's series
   "Address some contpte nits" provides some followup work.
 
 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page faults.
   He has also added a reproducer under the selftest code.
 
 - In the series "selftests/mm: Output cleanups for the compaction test",
   Mark Brown did what the title claims.
 
 - Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
 
 - Even more zswap material from Nhat Pham.  The series "fix and extend
   zswap kselftests" does as claimed.
 
 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
   our handling of DAX on archiecctures which have virtually aliasing data
   caches.  The arm architecture is the main beneficiary.
 
 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
   improvements in worst-case mmap_lock hold times during certain
   userfaultfd operations.
 
 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series
 
 	"page_owner: print stacks and their outstanding allocations"
 	"page_owner: Fixup and cleanup"
 
 - Uladzislau Rezki has contributed some vmalloc scalability improvements
   in his series "Mitigate a vmap lock contention".  It realizes a 12x
   improvement for a certain microbenchmark.
 
 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".
 
 - Some zsmalloc maintenance work from Chengming Zhou in the series
 
 	"mm/zsmalloc: fix and optimize objects/page migration"
 	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
 
 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0.  This a step along the path to implementaton of the merging of
   large anonymous folios.  The series is named "Enable >0 order folio
   memory compaction".
 
 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages() to
   an iterator".
 
 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".
 
 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios.  The
   series is named "Split a folio to any lower order folios".
 
 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.
 
 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".
 
 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which are
   configured to use large numbers of hugetlb pages.
 
 - Matthew Wilcox's series "PageFlags cleanups" does that.
 
 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also.  S390 is affected.
 
 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".
 
 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
 
 - Also, of course, many singleton patches to many things.  Please see
   the individual changelogs for details.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
 joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
 TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
 =TG55
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
   from hotplugged memory rather than only from main memory. Series
   "implement "memmap on memory" feature on s390".

 - More folio conversions from Matthew Wilcox in the series

	"Convert memcontrol charge moving to use folios"
	"mm: convert mm counter to take a folio"

 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes. The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".

 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.

 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools". Measured improvements are modest.

 - zswap cleanups and simplifications from Yosry Ahmed in the series
   "mm: zswap: simplify zswap_swapoff()".

 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is
   hotplugged as system memory.

 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.

 - More DAMON work from SeongJae Park in the series

	"mm/damon: make DAMON debugfs interface deprecation unignorable"
	"selftests/damon: add more tests for core functionalities and corner cases"
	"Docs/mm/damon: misc readability improvements"
	"mm/damon: let DAMOS feeds and tame/auto-tune itself"

 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving
   policy wherein we allocate memory across nodes in a weighted fashion
   rather than uniformly. This is beneficial in heterogeneous memory
   environments appearing with CXL.

 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".

 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".

 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format. Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.

 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
   targeted at arm64, this significantly speeds up fork() when the
   process has a large number of pte-mapped folios.

 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
   implements batching during munmap() and other pte teardown
   situations. The microbenchmark improvements are nice.

 - And in the series "Transparent Contiguous PTEs for User Mappings"
   Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings"). Kernel build times on arm64 improved nicely. Ryan's
   series "Address some contpte nits" provides some followup work.

 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page
   faults. He has also added a reproducer under the selftest code.

 - In the series "selftests/mm: Output cleanups for the compaction
   test", Mark Brown did what the title claims.

 - Kinsey Ho has added the series "mm/mglru: code cleanup and
   refactoring".

 - Even more zswap material from Nhat Pham. The series "fix and extend
   zswap kselftests" does as claimed.

 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
   in our handling of DAX on archiecctures which have virtually aliasing
   data caches. The arm architecture is the main beneficiary.

 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides
   dramatic improvements in worst-case mmap_lock hold times during
   certain userfaultfd operations.

 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series

	"page_owner: print stacks and their outstanding allocations"
	"page_owner: Fixup and cleanup"

 - Uladzislau Rezki has contributed some vmalloc scalability
   improvements in his series "Mitigate a vmap lock contention". It
   realizes a 12x improvement for a certain microbenchmark.

 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".

 - Some zsmalloc maintenance work from Chengming Zhou in the series

	"mm/zsmalloc: fix and optimize objects/page migration"
	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"

 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0. This a step along the path to implementaton of the merging
   of large anonymous folios. The series is named "Enable >0 order folio
   memory compaction".

 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages()
   to an iterator".

 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".

 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios. The
   series is named "Split a folio to any lower order folios".

 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.

 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".

 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which
   are configured to use large numbers of hugetlb pages.

 - Matthew Wilcox's series "PageFlags cleanups" does that.

 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also. S390 is affected.

 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".

 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM
   Selftests".

 - Also, of course, many singleton patches to many things. Please see
   the individual changelogs for details.

* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
  mm/zswap: remove the memcpy if acomp is not sleepable
  crypto: introduce: acomp_is_async to expose if comp drivers might sleep
  memtest: use {READ,WRITE}_ONCE in memory scanning
  mm: prohibit the last subpage from reusing the entire large folio
  mm: recover pud_leaf() definitions in nopmd case
  selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
  selftests/mm: skip uffd hugetlb tests with insufficient hugepages
  selftests/mm: dont fail testsuite due to a lack of hugepages
  mm/huge_memory: skip invalid debugfs new_order input for folio split
  mm/huge_memory: check new folio order when split a folio
  mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
  mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
  mm: fix list corruption in put_pages_list
  mm: remove folio from deferred split list before uncharging it
  filemap: avoid unnecessary major faults in filemap_fault()
  mm,page_owner: drop unnecessary check
  mm,page_owner: check for null stack_record before bumping its refcount
  mm: swap: fix race between free_swap_and_cache() and swapoff()
  mm/treewide: align up pXd_leaf() retval across archs
  mm/treewide: drop pXd_large()
  ...
2024-03-14 17:43:30 -07:00
Dan Williams
edc1243437 Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
Stephen reported that an htmldocs build hit:

   Documentation/ABI/testing/debugfs-cxl:38: ERROR: Unexpected indentation.

It turns out that line was fine but the tool was unhappy about some line
breaks in the table of values to error types.

It turns out that:

   make V=1 SPHINXDIRS="admin-guide" htmldocs

...can not be used to get more info about what is behind a documentation
build error. It was only pure luck that reflowing the text resulted in
an error message that seemed a imply a problem later on with line breaks
around the table.

Fixes: 8039804cfa ("cxl/core: Add CXL EINJ debugfs files")
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: http://lore.kernel.org/r/20240314141313.7ba04aff@canb.auug.org.au
Cc: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2024-03-14 17:34:26 -07:00
Linus Torvalds
fe46a7dd18 sound updates for 6.9-rc1
This was a relatively calm development cycle.  Most of changes are
 rather small device-specific fixes and enhancements.  The only
 significant changes in ALSA core are code refactoring with the recent
 cleanup infrastructure, which should bring no functionality changes.
 Some highlights below:
 
 Core:
 - Lots of cleanups in ALSA core code with automatic kfree cleanup
   and locking guard macros
 - New ALSA core kunit test
 
 ASoC:
 - SoundWire support for AMD ACP 6.3 systems
 - Support for reporting version information for AVS firmware
 - Support DSPless mode for Intel Soundwire systems
 - Support for configuring CS35L56 amplifiers using EFI calibration
    data
 - Log which component is being operated on as part of power management
    trace events.
 - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
 
 HD- and USB-audio:
 - More Cirrus HD-audio codec support
 - TAS2781 HD-audio codec fixes
 - Scarlett2 mixer fixes
 
 Others:
 - Enhancement of virtio driver for audio control supports
 - Cleanups of legacy PM code with new macros
 - Firewire sound updates
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmXyzFQOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE80WQ//bQeLEUF9HQqprCW96jFiGeO3/0Zb5pdCCrZw
 VYRxzeGBfMfVFvXSC4/Rp3zr4Dbc+sOg9GXAD6PVAo/QudIDkuX1pk/gRN2NFXQ5
 bimdZ6obM4WCl7isbDIbn/ifOx05F7p0+J9T9nAPrvBG4lpzXoMhGz75YnwaPlrh
 q5MKEZcuONlZPHZrBy/UsrYqWrnWUi2yWgQ5gRg/PTM4dgUAy2pH7NpKNxOiRntJ
 eqBfdvglSWQDH9kPgmeTggtFN8Axy+pd+g9M5pi/KOJfoBpWuv2nK31gnymdqV4H
 UrmwU/VAL2Y0zU34RCZQvPFre6S+487FEf/g+qgVTDqi0kxxFT2btcaTjggjLwEy
 p/SJlqNnA7W7D67/qf4MPNOEp88Dd6o1YN7o01vyC9RoX5FAbzvNLF8oH4BwGxs+
 HI+5aJUY1f2MGwN3NpPW5E12d1RSgSi9L9l/R8oAQmonARr3drj3tkndhFjndgXG
 IctwHlkYRSibe6m5k6sDEcil70UNl5M6sr/IjPmDvYudjdKHisowrxqF+nPrAYdM
 0z3fW333+OQf0XVd9iPLBmq+PpiAY1AhCJeF/hPr3D5qDZInhcd8CouFie+QGkHT
 Z5j5CvhNLgRdmlW9jvfBPBBCT7u8jr6JFszA3g6wpWUx6ndAGsI1z6iC+h23NpZj
 dxmJU00=
 =h9kz
 -----END PGP SIGNATURE-----

Merge tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This was a relatively calm development cycle. Most of changes are
  rather small device-specific fixes and enhancements. The only
  significant changes in ALSA core are code refactoring with the recent
  cleanup infrastructure, which should bring no functionality changes.
  Some highlights below:

  Core:
   - Lots of cleanups in ALSA core code with automatic kfree cleanup and
     locking guard macros
   - New ALSA core kunit test

  ASoC:
   - SoundWire support for AMD ACP 6.3 systems
   - Support for reporting version information for AVS firmware
   - Support DSPless mode for Intel Soundwire systems
   - Support for configuring CS35L56 amplifiers using EFI calibration
     data
   - Log which component is being operated on as part of power
     management trace events.
   - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x

  HD- and USB-audio:
   - More Cirrus HD-audio codec support
   - TAS2781 HD-audio codec fixes
   - Scarlett2 mixer fixes

  Others:
   - Enhancement of virtio driver for audio control supports
   - Cleanups of legacy PM code with new macros
   - Firewire sound updates"

* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
  ALSA: usb-audio: Stop parsing channels bits when all channels are found.
  ALSA: hda/tas2781: remove unnecessary runtime_pm calls
  ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
  ALSA: aaci: Delete unused variable in aaci_do_suspend
  ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
  ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
  ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
  ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
  ALSA: hda/tas2781: restore power state after system_resume
  ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
  ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
  ALSA: hda/tas2781: add lock to system_suspend
  ALSA: hda/tas2781: use dev_dbg in system_resume
  ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
  platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
  ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
  ASoC: cs35l56: Add support for CS35L54 and CS35L57
  ASoC: Intel: catpt: Carefully use PCI bitwise constants
  ALSA: hda: hda_component: Include sound/hda_codec.h
  ALSA: hda: hda_component: Add missing #include guards
  ...
2024-03-14 11:10:43 -07:00
Linus Torvalds
705c1da8fa pci-v6.9-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmXw04sUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vyT3xAAsp5+c2IcbrXpZZM7figwx4y9PPRp
 jcQ4AYSGP41xqTUGXUTcVZYvRorSIAFEOz33U0SL1UNxoOZz8j/M6SD58k8a6XRr
 9SSPuKja1OKJjONhS1bzrcbVtuzr71ISrECXfLkvW5hY5hvq+3+anMtu3/UIEHu6
 M1vVc+basRjjPJNTixMWvVqS3R+4gDAFeBtdZl/D+U6v0v2xOK+81YZqjfZZCw9v
 xmdHHK2dKNEdysNoRJ5cafY3b1NnSsrxlHbIhBnKt+7uRSWKD1dHcBQj7wDc/HrX
 yBGca+BZBKitXEJM3p5KcWWs4ijaywGw0GSffUIKrN9i6RIfwnxBH9jUbwDngifU
 2IR/kLEqdjYi/WnENxIHpQATLyXhXZ8uEnLS0xMlRIA96u3M5B0mrYOZxaN3bo12
 A3aE+aPOTw0u1wf7G8dBX6IdYnjZ/ZuR9Q+fVoKpZBvsYUVaKyiKCtKMCNaVirn5
 z7nxR1W71ee+35+37KthPXhiw+YtURGz1wBWt+wWUMjBcpIj2bpzU9wQDE9ZMdYt
 XJoJcatrRhJzefO3uzd0egft+vwk0xrj5LQEDhMQyDrnBLC4EgI5niKPWqbay5Nx
 Cnll01CI82xAnIF6eu7OOuI1nYGtoFcY8rP3hTC85cWN7Xi8SAOLTZZcVTpfBMUr
 l2uEll8p+8dZ6IY=
 =AP3I
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate interrupt related code in irq.c (Ilpo Järvinen)

   - Reduce kernel size by replacing sysfs resource macros with
     functions (Ilpo Järvinen)

   - Reduce kernel size by compiling sysfs support only when
     CONFIG_SYSFS=y (Lukas Wunner)

   - Avoid using Extended Tags on 3ware-9650SE Root Port to work around
     an apparent hardware defect (Jörg Wedekind)

  Resource management:

   - Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)

   - Move pci_iomap.c and other PCI-specific devres code to drivers/pci
     (Philipp Stanner)

   - Consolidate PCI devres code in devres.c (Philipp Stanner)

  Power management:

   - Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
     know how to return correctly to D0, and remove previous quirk that
     wasn't as specific (Daniel Drake)

   - Allow runtime PM when the driver enables it but doesn't need any
     runtime PM callbacks (Raag Jadav)

   - Drain runtime-idle callbacks before driver removal to avoid races
     between .remove() and .runtime_idle(), which caused intermittent
     page faults when the rtsx .runtime_idle() accessed registers that
     its .remove() had already unmapped (Rafael J. Wysocki)

  Virtualization:

   - Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
     with VFIO, e.g., for professional audio software on many Apple
     machines, at the cost of leaking state between VMs (Edmund Raile)

  Error handling:

   - Print all logged TLP Prefixes, not just the first, after AER or DPC
     errors (Ilpo Järvinen)

   - Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
     still don't advertise a legal size (Paul Menzel)

   - Ignore expected DPC Surprise Down errors on hot removal (Smita
     Koralahalli)

   - Block runtime suspend while handling AER errors to avoid races that
     prevent the device form being resumed from D3hot (Stanislaw
     Gruszka)

  Peer-to-peer DMA:

   - Use atomic XA allocation in RCU read section (Christophe JAILLET)

  ASPM:

   - Collect bits of ASPM-related code that we need even without
     CONFIG_PCIEASPM into aspm.c (David E. Box)

   - Save/restore L1 PM Substates config for suspend/resume (David E.
     Box)

   - Update save_save when ASPM config is changed, so a .slot_reset()
     during error recovery restores the changed config, not the
     .probe()-time config (Vidya Sagar)

  Endpoint framework:

   - Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)

   - Clean up endpoint BAR descriptions (Niklas Cassel)

   - Fix ntb_register_device() name leak in error path (Yang Yingliang)

   - Return actual error code for pci_vntb_probe() failure (Yang
     Yingliang)

  Broadcom STB PCIe controller driver:

   - Fix MDIO write polling, which previously never waited for
     completion (Jonathan Bell)

  Cadence PCIe endpoint driver:

   - Clear the ARI "Next Function Number" of last function (Jasko-EXT
     Wojciech)

  Freescale i.MX6 PCIe controller driver:

   - Simplify by replacing switch statements with function pointers for
     different hardware variants (Frank Li)

   - Simplify by using clk_bulk*() API (Frank Li)

   - Remove redundant DT clock and reg/reg-name details (Frank Li)

   - Add i.MX95 DT and driver support for both Root Complex and Endpoint
     mode (Frank Li)

  Microsoft Hyper-V host bridge driver:

   - Reduce memory usage by limiting ring buffer size to 16KB instead of
     4 pages (Michael Kelley)

  Qualcomm PCIe controller driver:

   - Add X1E80100 DT and driver support (Abel Vesa)

   - Add DT 'required-opps' for SoCs that require a minimum performance
     level (Johan Hovold)

   - Make DT 'msi-map-mask' optional, depending on how MSI interrupts
     are mapped (Johan Hovold)

   - Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
     configuration isn't tuned correctly for L0s (Johan Hovold)

   - Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
     separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
     SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
     Kozlowski)

   - Enable BDF to SID translation by disabling bypass mode (Manivannan
     Sadhasivam)

   - Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
     Sarkar)

  Synopsys DesignWare PCIe controller driver:

   - Allocate 64-bit MSI address if no 32-bit address is available (Ajay
     Agarwal)

   - Fix endpoint Resizable BAR to actually advertise the required 1MB
     size (Niklas Cassel)

  MicroSemi Switchtec management driver:

   - Release resources if the .probe() fails (Christophe JAILLET)

  Miscellaneous:

   - Make pcie_port_bus_type const (Ricardo B. Marliere)"

* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
  PCI/ASPM: Update save_state when configuration changes
  PCI/ASPM: Disable L1 before configuring L1 Substates
  PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
  PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
  PCI: hv: Fix ring buffer size calculation
  PCI: dwc: endpoint: Fix advertised resizable BAR size
  PCI: cadence: Clear the ARI Capability Next Function Number of the last function
  PCI: dwc: Strengthen the MSI address allocation logic
  PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
  PCI: qcom: Add X1E80100 PCIe support
  dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
  PCI: qcom: Enable BDF to SID translation properly
  PCI/AER: Generalize TLP Header Log reading
  PCI/AER: Use explicit register size for PCI_ERR_CAP
  PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
  dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
  dt-bindings: PCI: qcom: Allow 'required-opps'
  PCI/AER: Block runtime suspend when handling errors
  PCI/ASPM: Move pci_save_ltr_state() to aspm.c
  PCI/ASPM: Always build aspm.c
  ...
2024-03-14 10:58:27 -07:00
Linus Torvalds
f5c31bcf60 - Core Frameworks
- Introduce ExpressWire library
 
  - New Drivers
    - Add support for ON Semiconductor NCP5623 RGB LED Driver
 
  - New Device Support
    - Add support for PM660L to Qualcomm's LPG driver
 
  - New Functionality
    - Dynamically load modules required for the default-trigger
    - Add some support for suspend and resume
    - Allow LEDs to remain lit during suspend
 
  - Fix-ups
    - Device Tree binding adaptions/conversions/creation
    - Fix include lists; alphabetise, remove unused, explicitly add used
    - Add new led_match_default_trigger to avoid duplication
    - Add module alias' to aid auto-loading
    - Default to hw_control if no others are specified
    - De-bloat the supported link speed attribute lists
    - Remove superfluous code and simplify overall
    - Constify some variables
 
  - Bug Fixes
    - Prevent kernel panic when renaming the net interface
    - Fix Kconfig related build errors
    - Ensure mutexes are unlocked prior to destroying them
    - Provide clean-up between state changes to avoid invalid state
    - Fix some broken kernel-doc headers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmXzCvUACgkQUa+KL4f8
 d2Fh0A/+KQiuzluglEsnyG7gfb2771x9dQ9pIwaR68UkCwThNH8ico+NqUDs8Jur
 6jtfYfKcWIz3i5kbnWBDGJfEEiVuDGu8Zv9UFxzQViyWQqawkJWNMsYqL3KtfI4i
 Ujj2Ja1MsoqO7COngry9I+3sT6rEwdQJMrVfNAdvOYjlXwr3O8Z2NipPACEqutUr
 0gxKAEEbGOj3+s3UGInrGi9RGuOVBe9UNA2etmtie1kxkdowTxCNY94ukUf9tnvC
 WVXF8iOByUgVAxMh1ugSc27CTCV+VcDMYKKr9ABVhskI/pT3zMFoUCYY1EqhaOTF
 Q40+yFX8ERomNTgy1tbNf06PkzaN+NJ4P/SHFU79madfy4OM6QobpTSt7bBpaSEP
 gm3zuI1a353NPfAUZiIsTgv8jCh18w/adphTNsXY/4PnmkKF0+Pm57PJf8BDhlY3
 KiScK7WXhGS9G3wNpLH+7QBdWiON3oWYJhVK4ijEfgRpEDofv+W16GzcETkUsyQ1
 5DLu/W8wHN9zxHj1YXaitmnRjX3IMoltcIix8FI3YUKrx3m3twm2Vj5ZLziaPm83
 7rBBPyePXwIamLokiTPCfXOxygO7Qv6VAp1aCR6400R/rtjykziboqvT2o6OMpkS
 W/88631VIuL9jAaP/zdUHrle1NpKDiHs2MF0Rtj+0OOoMJyOC7k=
 =m2vY
 -----END PGP SIGNATURE-----

Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "Core Framework:
   - Introduce ExpressWire library

  New Drivers:
   - Add support for ON Semiconductor NCP5623 RGB LED Driver

  New Device Support:
   - Add support for PM660L to Qualcomm's LPG driver

  New Functionality:
   - Dynamically load modules required for the default-trigger
   - Add some support for suspend and resume
   - Allow LEDs to remain lit during suspend

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Add new led_match_default_trigger to avoid duplication
   - Add module alias' to aid auto-loading
   - Default to hw_control if no others are specified
   - De-bloat the supported link speed attribute lists
   - Remove superfluous code and simplify overall
   - Constify some variables

  Bug Fixes:
   - Prevent kernel panic when renaming the net interface
   - Fix Kconfig related build errors
   - Ensure mutexes are unlocked prior to destroying them
   - Provide clean-up between state changes to avoid invalid state
   - Fix some broken kernel-doc headers"

* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
  leds: ncp5623: Add MS suffix to time defines
  leds: Add NCP5623 multi-led driver
  dt-bindings: leds: Add NCP5623 multi-LED Controller
  leds: mlxreg: Drop an excess struct mlxreg_led_data member
  leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
  leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
  leds: Fix ifdef check for gpio_led_register_device()
  dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
  dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
  dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  leds: sgm3140: Add missing timer cleanup and flash gpio control
  leds: expresswire: Don't depend on NEW_LEDS
  Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
  leds: aw2013: Unlock mutex before destroying it
  leds: qcom-lpg: Add QCOM_PBS dependency
  leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
  leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  leds: qcom-lpg: Add PM660L configuration and compatible
  leds: spi-byte: Use devm_led_classdev_register_ext()
  leds: pca963x: Add support for suspend and resume
  ...
2024-03-14 10:38:25 -07:00
Linus Torvalds
15223fdbdf hwmon updates for v6.9
* New drivers for
 
   - Amphenol ChipCap 2
 
   - ASPEED g6 PWM/Fan tach
 
   - Astera Labs PT5161L retimer
 
   - ASUS ROG RYUJIN II 360 AIO cooler
 
   - LTC4282
 
   - Microsoft Surface devices
 
   - MPS MPQ8785 Synchronous Step-Down Converter
 
   - NZXT Kraken X and Z series AIO CPU coolers
 
 * Additional chip support in existing drivers
 
   - Ayaneo Air Plus 7320u (oxp-sensors)
 
   - INA260 (ina2xx)
 
   - XPS 9315 (dell-smm)
 
   - MSI customer ID (nct6683)
 
 * Devicetree bindings updates
 
   - Common schema for hardware monitoring devices
 
   - Common schema for fans
 
   - Update chip descriptions to use common schema
 
   - Document regulator properties in several drivers
 
   - Explicit bindings for infineon buck converters
 
 * Other improvements
 
   - Replaced rbtree with maple tree register cache in several drivers
 
   - Added support for humidity min/max alarm and volatage fault attributes
     to hwmon core
 
   - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o detect()
 
   - Dropped obsolete and redundant entried from MAINTAINERS
 
   - Cleaned up axi-fan-control and coretemp drivers
 
   - Minor fixes and improvements in several other drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmXvI8QACgkQyx8mb86f
 mYFWTQ/9Hz4QfgIueAEhWGy0XORt7nSCeexkWIR341iyRk4LQA0UjDQg3+Ub5Hi1
 7IBGDNi124S1I/W8fJl1KFgXjbirhuzpHq4DF60Ty+egTZ9IZpu3uySR4mubixYm
 J3el7SIJBvs3SgMFdS/HCtJqeU5HLk+1NjfWDmnq0Z27GHzEy/Nglj2TTO1CjMz/
 tZ/LOWkdG5tMbwI8SZ/mBNMXMpYp/jnUZbrMxgZ/y+07R3jP7i1GWRjq5ZGuWaP6
 SQEs4vfss/y6WUSZZenIIigRIAiAnsNIrjUjrMKPdf0EkjB+0ljn/jLXpAsUU6fL
 07Uy+AwQb89PPWIKHdldn7/MYaR3zU+LwKwPbjULuvpo6Cj87WcIP/x7QqL//Ise
 Ix2Buy/oWoVHKG7Gtf+mF+Ott5MeFgj6pVsCN4IAYYdyai0GPM3RpFAcrIXFCjsE
 i3M5aRC46Yy8Ba6ov3Jmlh83kc9LauJrlCxIxIXTlUJIZiW7a5w083QDSaw3qQdB
 hukwfC8wOzpEsQngkBQyRSpF468lASzc4lp++tPLS/W0zxBrgrnHvgXTHnN8IxvQ
 ocuD5tVMg9gE2xT88t8BHTcw2uv03U5RoXY+nucbxA+Y/aT2t+jZhX9cPbq4+Rhe
 v7XDGMxcBYgtfwx6JT97DKqW9qLc01k8wxonCOrUop6B/+MdRbw=
 =BTB3
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Amphenol ChipCap 2
   - ASPEED g6 PWM/Fan tach
   - Astera Labs PT5161L retimer
   - ASUS ROG RYUJIN II 360 AIO cooler
   - LTC4282
   - Microsoft Surface devices
   - MPS MPQ8785 Synchronous Step-Down Converter
   - NZXT Kraken X and Z series AIO CPU coolers

  Additional chip support in existing drivers:
   - Ayaneo Air Plus 7320u (oxp-sensors)
   - INA260 (ina2xx)
   - XPS 9315 (dell-smm)
   - MSI customer ID (nct6683)

  Devicetree bindings updates:
   - Common schema for hardware monitoring devices
   - Common schema for fans
   - Update chip descriptions to use common schema
   - Document regulator properties in several drivers
   - Explicit bindings for infineon buck converters

  Other improvements:
   - Replaced rbtree with maple tree register cache in several drivers
   - Added support for humidity min/max alarm and volatage fault
     attributes to hwmon core
   - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
     detect()
   - Dropped obsolete and redundant entried from MAINTAINERS
   - Cleaned up axi-fan-control and coretemp drivers
   - Minor fixes and improvements in several other drivers"

* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
  hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
  hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
  dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
  dt-bindings: hwmon: fan: Add fan binding to schema
  dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
  hwmon: (amc6821) add of_match table
  dt-bindings: hwmon: lm75: use common hwmon schema
  hwmon: (sis5595) drop unused DIV_TO_REG function
  dt-bindings: hwmon: reference common hwmon schema
  dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
  dt-bindings: hwmon: adi,adm1275: use common hwmon schema
  dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
  dt-bindings: hwmon: add common properties
  hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
  regulator: dt-bindings: promote infineon buck converters to their own binding
  dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
  dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
  MAINTAINERS: Drop redundant hwmon entries
  ...
2024-03-13 11:26:58 -07:00
Linus Torvalds
69afef4af4 gpio updates for v6.9
Serialization rework:
 - use SRCU to serialize access to the global GPIO device list, to GPIO device
   structs themselves and to GPIO descriptors
 - make the GPIO subsystem resilient to the GPIO providers being unbound while
   the API calls are in progress
 - don't dereference the SRCU-protected chip pointer if the information we need
   can be obtained from the GPIO device structure
 - move some of the information contained in struct gpio_chip to struct
   gpio_device to further reduce the need to dereference the former
 - pass the GPIO device struct instead of the GPIO chip to sysfs callback to,
   again, reduce the need for accessing the latter
 - get GPIO descriptors from the GPIO device, not from the chip for the same
   reason
 - allow for mostly lockless operation of the GPIO driver API: assure
   consistency with SRCU and atomic operations
 - remove the global GPIO spinlock
 - remove the character device RW semaphore
 
 Core GPIOLIB:
 - constify pointers in GPIO API where applicable
 - unify the GPIO counting APIs for ACPI and OF
 - provide a macro for iterating over all GPIOs, not only the ones that are
   requested
 - remove leftover typedefs
 - pass the consumer device to GPIO core in devm_fwnode_gpiod_get_index() for
   improved logging
 - constify the GPIO bus type
 - don't warn about removing GPIO chips with descriptors still held by users as
   we can now handle this situation gracefully
 - remove unused logging helpers
 - unexport functions that are only used internally in the GPIO subsystem
 - set the device type (assign the relevant struct device_type) for GPIO devices
 
 New drivers:
 - add the ChromeOS EC GPIO driver
 
 Driver improvements:
 - allow building gpio-vf610 with COMPILE_TEST as well as disabling it in
   menuconfig (before it was always built for i.MX cofigs)
 - count the number of EICs using the device properties instead of hard-coding
   it in gpio-eic-sprd
 - improve the device naming, extend the debugfs output and add lockdep asserts
   to gpio-sim
 
 DT bindings:
 - document the 'label' property for gpio-pca9570
 - convert aspeed,ast2400-gpio bindings to DT schema
 - disallow unevaluated properties for gpio-mvebu
 - document a new model in renesas,rcar-gpio
 
 Documentation:
 - improve the character device kerneldocs in user-space headers
 - add proper documentation for the character device uAPI (both v1 and v2)
 - move the sysfs and gpio-mockup docs into the "obsolete" section
 - improve naming consistency for GPIO terms
 - clarify the line values description for sysfs
 - minor docs improvements
 - improve the driver API contract for setting GPIO direction
 - mark unsafe APIs as deprecated in kerneldocs and suggest replacements
 
 Other:
 - remove an obsolete test from selftests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmXu1ecACgkQEacuoBRx
 13JR7w//R3TswZ1uC9qkRjat9eA2KZUaI2QChlS7V/yXVcDHynuTlO/ZQmnnMdYL
 ch7T2cjPcW0OCt0UhcjamUmYtWaxe1e5GU3E42EosWUsojEzgGs0iNKe0R4SHYzv
 whlkFqO8+8IctYhiMpAU1PzP9N4YBqypwgCrTqHIrYuhz3MbPQxtCMkr7g0LTo8u
 Z3K0D3Y0LuwISWNYYhA20Bwemn1fEHXJ9f3pTeNaGh2dGZek9k9xd0zWcCxwhaYD
 CBTBiZXf57TUTJ2u+JG+au1ghEmmvBPlMpza+fazypbcvsiQxdGvv5QH1bTwyt4B
 woGq+biLLvlwfJ8BT7+09uni7gUyNL3wWkixlx/8Slkyti4xWqgZQ3WnhwN8yS4Y
 DbkTtzH/PIsjr1dZw6rnGoXi80lBEaok7LeI0QhybopTXQI+CnIbE/RBhzly8Mf8
 1cAVFjrF2gPuaTuheakRBw4LOhegf4a485fadJVEUeEpeF7/p9rDQWAbgohYUnCE
 gHPwkTOJuOZp+BlsTOyspnqxWnDVMtCnmi+q1o7JvEgXqAtzU7+1gz/wDpfsHgHQ
 oze6V2JvD2R3JkHmdqcIzq5yNwk1rOguOY3saNiwSk95JY+A8vhAe/gVykklKDXX
 oX/DPwlVd/0OR+0HCQ3r0pXK8BSRQ9qm/nUZNnLB+Rts9K1peIU=
 =LX+L
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "The biggest feature is the locking overhaul. Up until now the
  synchronization in the GPIO subsystem was broken. There was a single
  spinlock "protecting" multiple data structures but doing it wrong (as
  evidenced by several places where it would be released when a sleeping
  function was called and then reacquired without checking the protected
  state).

  We tried to use an RW semaphore before but the main issue with GPIO is
  that we have drivers implementing the interfaces in both sleeping and
  non-sleeping ways as well as user-facing interfaces that can be called
  both from process as well as atomic contexts. Both ends converge in
  the same code paths that can use neither spinlocks nor mutexes. The
  only reasonable way out is to use SRCU and go mostly lockless. To that
  end: we add several SRCU structs in relevant places and use them to
  assure consistency between API calls together with atomic reads and
  writes of GPIO descriptor flags where it makes sense.

  This code has spent several weeks in next and has received several
  fixes in the first week or two after which it stabilized nicely. The
  GPIO subsystem is now resilient to providers being suddenly unbound.
  We managed to also remove the existing character device RW semaphore
  and the obsolete global spinlock.

  Other than the locking rework we have one new driver (for Chromebook
  EC), much appreciated documentation improvements from Kent and the
  regular driver improvements, DT-bindings updates and GPIOLIB core
  tweaks.

  Serialization rework:
   - use SRCU to serialize access to the global GPIO device list, to
     GPIO device structs themselves and to GPIO descriptors
   - make the GPIO subsystem resilient to the GPIO providers being
     unbound while the API calls are in progress
   - don't dereference the SRCU-protected chip pointer if the
     information we need can be obtained from the GPIO device structure
   - move some of the information contained in struct gpio_chip to
     struct gpio_device to further reduce the need to dereference the
     former
   - pass the GPIO device struct instead of the GPIO chip to sysfs
     callback to, again, reduce the need for accessing the latter
   - get GPIO descriptors from the GPIO device, not from the chip for
     the same reason
   - allow for mostly lockless operation of the GPIO driver API: assure
     consistency with SRCU and atomic operations
   - remove the global GPIO spinlock
   - remove the character device RW semaphore

  Core GPIOLIB:
   - constify pointers in GPIO API where applicable
   - unify the GPIO counting APIs for ACPI and OF
   - provide a macro for iterating over all GPIOs, not only the ones
     that are requested
   - remove leftover typedefs
   - pass the consumer device to GPIO core in
     devm_fwnode_gpiod_get_index() for improved logging
   - constify the GPIO bus type
   - don't warn about removing GPIO chips with descriptors still held by
     users as we can now handle this situation gracefully
   - remove unused logging helpers
   - unexport functions that are only used internally in the GPIO
     subsystem
   - set the device type (assign the relevant struct device_type) for
     GPIO devices

  New drivers:
   - add the ChromeOS EC GPIO driver

  Driver improvements:
   - allow building gpio-vf610 with COMPILE_TEST as well as disabling it
     in menuconfig (before it was always built for i.MX cofigs)
   - count the number of EICs using the device properties instead of
     hard-coding it in gpio-eic-sprd
   - improve the device naming, extend the debugfs output and add
     lockdep asserts to gpio-sim

  DT bindings:
   - document the 'label' property for gpio-pca9570
   - convert aspeed,ast2400-gpio bindings to DT schema
   - disallow unevaluated properties for gpio-mvebu
   - document a new model in renesas,rcar-gpio

  Documentation:
   - improve the character device kerneldocs in user-space headers
   - add proper documentation for the character device uAPI (both v1 and v2)
   - move the sysfs and gpio-mockup docs into the "obsolete" section
   - improve naming consistency for GPIO terms
   - clarify the line values description for sysfs
   - minor docs improvements
   - improve the driver API contract for setting GPIO direction
   - mark unsafe APIs as deprecated in kerneldocs and suggest
     replacements

  Other:
   - remove an obsolete test from selftests"

* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
  gpio: sysfs: repair export returning -EPERM on 1st attempt
  selftest: gpio: remove obsolete gpio-mockup test
  gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
  dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
  gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
  gpio: of: Make of_gpio_get_count() take firmware node as a parameter
  gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
  gpio: sim: use for_each_hwgpio()
  gpio: provide for_each_hwgpio()
  gpio: don't warn about removing GPIO chips with active users anymore
  gpio: sim: delimit the fwnode name with a ":" when generating labels
  gpio: sim: add lockdep asserts
  gpio: Add ChromeOS EC GPIO driver
  gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
  gpio: fix memory leak in gpiod_request_commit()
  gpio: constify opaque pointer "data" in gpio_device_find()
  gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
  gpio: uapi: clarify default_values being logical
  gpio: sysfs: fix inverted pointer logic
  gpio: don't let lockdep complain about inherently dangerous RCU usage
  ...
2024-03-13 11:14:55 -07:00
Linus Torvalds
8c9c2f851b IOMMU Updates for Linux v6.9
Including:
 
 	- Core changes:
 	  - Constification of bus_type pointer
 	  - Preparations for user-space page-fault delivery
 	  - Use a named kmem_cache for IOVA magazines
 
 	- Intel VT-d changes from Lu Baolu:
 	  - Add RBTree to track iommu probed devices
 	  - Add Intel IOMMU debugfs document
 	  - Cleanup and refactoring
 
 	- ARM-SMMU Updates from Will Deacon:
 	  - Device-tree binding updates for a bunch of Qualcomm SoCs
 	  - SMMUv2: Support for Qualcomm X1E80100 MDSS
 	  - SMMUv3: Significant rework of the driver's STE manipulation and
 	    domain handling code. This is the initial part of a larger scale
 	    rework aiming to improve the driver's implementation of the
 	    IOMMU-API in preparation for hooking up IOMMUFD support.
 
 	- AMD-Vi Updates:
 	  - Refactor GCR3 table support for SVA
 	  - Cleanups
 
 	- Some smaller cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmXuyf8ACgkQK/BELZcB
 GuNXwxAApkjDm7VWM2D2K8Y+8YLbtaljMCCudNZKhgT++HEo4YlXcA5NmOddMIFc
 qhF9EwAWlQfj3krJLJQSZ6v/joKpXSwS6LDYuEGmJ/pIGfN5HqaTsOCItriP7Mle
 ZgRTI28u5ykZt4b6IKG8QeexilQi2DsIxT46HFiHL0GrvcBcdxDuKnE22PNCTwU2
 25WyJzgo//Ht2BrwlhrduZVQUh0KzXYuV5lErvoobmT0v/a4llS20ov+IE/ut54w
 FxIqGR8rMdJ9D2dM0bWRkdJY/vJxokah2QHm0gcna3Gr2iENL2xWFUtm+j1B6Smb
 VuxbwMkB0Iz530eShebmzQ07e2f1rRb4DySriu4m/jb8we20AYqKMYaxQxZkU68T
 1hExo+/QJQil9p1t+7Eur+S1u6gRHOdqfBnCzGOth/zzY1lbEzpdp8b9M8wnGa4K
 Y0EDeUpKtVIP1ZRCBi8CGyU1jgJF13Nx7MnOalgGWjDysB5RPamnrhz71EuD6rLw
 Jxp2EYo8NQPmPbEcl9NDS+oOn5Fz5TyPiMF2GUzhb9KisLxUjriLoTaNyBsdFkds
 2q+x6KY8qPGk37NhN0ktfpk9CtSGN47Pm8ZznEkFt9AR96GJDX+3NhUNAwEKslwt
 1tavDmmdOclOfIpWtaMlKQTHGhuSBZo1A40ATeM/MjHQ8rEtwXk=
 =HV07
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:
 "Core changes:
    - Constification of bus_type pointer
    - Preparations for user-space page-fault delivery
    - Use a named kmem_cache for IOVA magazines

  Intel VT-d changes from Lu Baolu:
    - Add RBTree to track iommu probed devices
    - Add Intel IOMMU debugfs document
    - Cleanup and refactoring

  ARM-SMMU Updates from Will Deacon:
    - Device-tree binding updates for a bunch of Qualcomm SoCs
    - SMMUv2: Support for Qualcomm X1E80100 MDSS
    - SMMUv3: Significant rework of the driver's STE manipulation and
      domain handling code. This is the initial part of a larger scale
      rework aiming to improve the driver's implementation of the
      IOMMU-API in preparation for hooking up IOMMUFD support.

  AMD-Vi Updates:
    - Refactor GCR3 table support for SVA
    - Cleanups

  Some smaller cleanups and fixes"

* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
  iommu: Fix compilation without CONFIG_IOMMU_INTEL
  iommu/amd: Fix sleeping in atomic context
  iommu/dma: Document min_align_mask assumption
  iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
  iommu/vt-d: Remove scalable mode context entry setup from attach_dev
  iommu/vt-d: Setup scalable mode context entry in probe path
  iommu/vt-d: Fix NULL domain on device release
  iommu: Add static iommu_ops->release_domain
  iommu/vt-d: Improve ITE fault handling if target device isn't present
  iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
  PCI: Make pci_dev_is_disconnected() helper public for other drivers
  iommu/vt-d: Use device rbtree in iopf reporting path
  iommu/vt-d: Use rbtree to track iommu probed devices
  iommu/vt-d: Merge intel_svm_bind_mm() into its caller
  iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
  iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
  iommu/vt-d: Add the document for Intel IOMMU debugfs
  iommu/vt-d: Use kcalloc() instead of kzalloc()
  iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
  iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
  ...
2024-03-13 09:15:30 -07:00
Dan Williams
75f4d93ee8 Merge branch 'for-6.9/cxl-einj' into for-6.9/cxl
Pick up support for injecting errors via ACPI EINJ into the CXL protocol
for v6.9.
2024-03-13 00:09:20 -07:00
Ben Cheatham
8039804cfa cxl/core: Add CXL EINJ debugfs files
Export CXL helper functions in einj-cxl.c for getting/injecting
available CXL protocol error types to sysfs under kernel/debug/cxl.

The kernel/debug/cxl/einj_types file will print the available CXL
protocol errors in the same format as the available_error_types
file provided by the einj module. The
kernel/debug/cxl/$dport_dev/einj_inject file is functionally the same
as the error_type and error_inject files provided by the EINJ module,
i.e.: writing an error type into $dport_dev/einj_inject will inject
said error type into the CXL dport represented by $dport_dev.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ben Cheatham <Benjamin.Cheatham@amd.com>
Link: https://lore.kernel.org/r/20240311142508.31717-4-Benjamin.Cheatham@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2024-03-12 23:08:30 -07:00
Linus Torvalds
9187210eee Networking changes for 6.9.
Core & protocols
 ----------------
 
  - Large effort by Eric to lower rtnl_lock pressure and remove locks:
 
    - Make commonly used parts of rtnetlink (address, route dumps etc.)
      lockless, protected by RCU instead of rtnl_lock.
 
    - Add a netns exit callback which already holds rtnl_lock,
      allowing netns exit to take rtnl_lock once in the core
      instead of once for each driver / callback.
 
    - Remove locks / serialization in the socket diag interface.
 
    - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
 
    - Remove the dev_base_lock, depend on RCU where necessary.
 
  - Support busy polling on a per-epoll context basis. Poll length
    and budget parameters can be set independently of system defaults.
 
  - Introduce struct net_hotdata, to make sure read-mostly global config
    variables fit in as few cache lines as possible.
 
  - Add optional per-nexthop statistics to ease monitoring / debug
    of ECMP imbalance problems.
 
  - Support TCP_NOTSENT_LOWAT in MPTCP.
 
  - Ensure that IPv6 temporary addresses' preferred lifetimes are long
    enough, compared to other configured lifetimes, and at least 2 sec.
 
  - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
 
  - Add support for the independent control state machine for bonding
    per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
    control state machine.
 
  - Add "network ID" to MCTP socket APIs to support hosts with multiple
    disjoint MCTP networks.
 
  - Re-use the mono_delivery_time skbuff bit for packets which user
    space wants to be sent at a specified time. Maintain the timing
    information while traversing veth links, bridge etc.
 
  - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
 
  - Simplify many places iterating over netdevs by using an xarray
    instead of a hash table walk (hash table remains in place, for
    use on fastpaths).
 
  - Speed up scanning for expired routes by keeping a dedicated list.
 
  - Speed up "generic" XDP by trying harder to avoid large allocations.
 
  - Support attaching arbitrary metadata to netconsole messages.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
    VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
 
  - Rework selftest harness to enable the use of the full range of
    ksft exit code (pass, fail, skip, xfail, xpass).
 
 Netfilter
 ---------
 
  - Allow userspace to define a table that is exclusively owned by a daemon
    (via netlink socket aliveness) without auto-removing this table when
    the userspace program exits. Such table gets marked as orphaned and
    a restarting management daemon can re-attach/regain ownership.
 
  - Speed up element insertions to nftables' concatenated-ranges set type.
    Compact a few related data structures.
 
 BPF
 ---
 
  - Add BPF token support for delegating a subset of BPF subsystem
    functionality from privileged system-wide daemons such as systemd
    through special mount options for userns-bound BPF fs to a trusted
    & unprivileged application.
 
  - Introduce bpf_arena which is sparse shared memory region between BPF
    program and user space where structures inside the arena can have
    pointers to other areas of the arena, and pointers work seamlessly
    for both user-space programs and BPF programs.
 
  - Introduce may_goto instruction that is a contract between the verifier
    and the program. The verifier allows the program to loop assuming it's
    behaving well, but reserves the right to terminate it.
 
  - Extend the BPF verifier to enable static subprog calls in spin lock
    critical sections.
 
  - Support registration of struct_ops types from modules which helps
    projects like fuse-bpf that seeks to implement a new struct_ops type.
 
  - Add support for retrieval of cookies for perf/kprobe multi links.
 
  - Support arbitrary TCP SYN cookie generation / validation in the TC
    layer with BPF to allow creating SYN flood handling in BPF firewalls.
 
  - Add code generation to inline the bpf_kptr_xchg() helper which
    improves performance when stashing/popping the allocated BPF objects.
 
 Wireless
 --------
 
  - Add SPP (signaling and payload protected) AMSDU support.
 
  - Support wider bandwidth OFDMA, as required for EHT operation.
 
 Driver API
 ----------
 
  - Major overhaul of the Energy Efficient Ethernet internals to support
    new link modes (2.5GE, 5GE), share more code between drivers
    (especially those using phylib), and encourage more uniform behavior.
    Convert and clean up drivers.
 
  - Define an API for querying per netdev queue statistics from drivers.
 
  - IPSec: account in global stats for fully offloaded sessions.
 
  - Create a concept of Ethernet PHY Packages at the Device Tree level,
    to allow parameterizing the existing PHY package code.
 
  - Enable Rx hashing (RSS) on GTP protocol fields.
 
 Misc
 ----
 
  - Improvements and refactoring all over networking selftests.
 
  - Create uniform module aliases for TC classifiers, actions,
    and packet schedulers to simplify creating modprobe policies.
 
  - Address all missing MODULE_DESCRIPTION() warnings in networking.
 
  - Extend the Netlink descriptions in YAML to cover message encapsulation
    or "Netlink polymorphism", where interpretation of nested attributes
    depends on link type, classifier type or some other "class type".
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
    - Intel (100G, ice, idpf):
      - support E825-C devices
    - nVidia/Mellanox:
      - support devices with one port and multiple PCIe links
    - Broadcom (bnxt):
      - support n-tuple filters
      - support configuring the RSS key
    - Wangxun (ngbe/txgbe):
      - implement irq_domain for TXGBE's sub-interrupts
    - Pensando/AMD:
      - support XDP
      - optimize queue submission and wakeup handling (+17% bps)
      - optimize struct layout, saving 28% of memory on queues
 
  - Ethernet NICs embedded and virtual:
    - Google cloud vNIC:
      - refactor driver to perform memory allocations for new queue
        config before stopping and freeing the old queue memory
    - Synopsys (stmmac):
      - obey queueMaxSDU and implement counters required by 802.1Qbv
    - Renesas (ravb):
      - support packet checksum offload
      - suspend to RAM and runtime PM support
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - support for nexthop group statistics
    - Microchip:
      - ksz8: implement PHY loopback
      - add support for KSZ8567, a 7-port 10/100Mbps switch
 
  - PTP:
    - New driver for RENESAS FemtoClock3 Wireless clock generator.
    - Support OCP PTP cards designed and built by Adva.
 
  - CAN:
    - Support recvmsg() flags for own, local and remote traffic
      on CAN BCM sockets.
    - Support for esd GmbH PCIe/402 CAN device family.
    - m_can:
      - Rx/Tx submission coalescing
      - wake on frame Rx
 
  - WiFi:
    - Intel (iwlwifi):
      - enable signaling and payload protected A-MSDUs
      - support wider-bandwidth OFDMA
      - support for new devices
      - bump FW API to 89 for AX devices; 90 for BZ/SC devices
    - MediaTek (mt76):
      - mt7915: newer ADIE version support
      - mt7925: radio temperature sensor support
    - Qualcomm (ath11k):
      - support 6 GHz station power modes: Low Power Indoor (LPI),
        Standard Power) SP and Very Low Power (VLP)
      - QCA6390 & WCN6855: support 2 concurrent station interfaces
      - QCA2066 support
    - Qualcomm (ath12k):
      - refactoring in preparation for Multi-Link Operation (MLO) support
      - 1024 Block Ack window size support
      - firmware-2.bin support
      - support having multiple identical PCI devices (firmware needs to
        have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
      - QCN9274: support split-PHY devices
      - WCN7850: enable Power Save Mode in station mode
      - WCN7850: P2P support
    - RealTek:
      - rtw88: support for more rtw8811cu and rtw8821cu devices
      - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
      - rtlwifi: speed up USB firmware initialization
      - rtwl8xxxu:
        - RTL8188F: concurrent interface support
        - Channel Switch Announcement (CSA) support in AP mode
    - Broadcom (brcmfmac):
      - per-vendor feature support
      - per-vendor SAE password setup
      - DMI nvram filename quirk for ACEPC W5 Pro
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmXv0mgACgkQMUZtbf5S
 IrtgMxAAuRd+WJW++SENr4KxIWhYO1q6Xcxnai43wrNkan9swD24icG8TYALt4f3
 yoT6idQvWReAb5JNlh9rUQz8R7E0nJXlvEFn5MtJwcthx2C6wFo/XkJlddlRrT+j
 c2xGILwLjRhW65LaC0MZ2ECbEERkFz8xcGfK2SWzUgh6KYvPjcRfKFxugpM7xOQK
 P/Wnqhs4fVRS/Mj/bCcXcO+yhwC121Q3qVeQVjGS0AzEC65hAW87a/kc2BfgcegD
 EyI9R7mf6criQwX+0awubjfoIdr4oW/8oDVNvUDczkJkbaEVaLMQk9P5x/0XnnVS
 UHUchWXyI80Q8Rj12uN1/I0h3WtwNQnCRBuLSmtm6GLfCAwbLvp2nGWDnaXiqryW
 DVKUIHGvqPKjkOOMOVfSvfB3LvkS3xsFVVYiQBQCn0YSs/gtu4CoF2Nty9CiLPbK
 tTuxUnLdPDZDxU//l0VArZmP8p2JM7XQGJ+JH8GFH4SBTyBR23e0iyPSoyaxjnYn
 RReDnHMVsrS1i7GPhbqDJWn+uqMSs7N149i0XmmyeqwQHUVSJN3J2BApP2nCaDfy
 H2lTuYly5FfEezt61NvCE4qr/VsWeEjm1fYlFQ9dFn4pGn+HghyCpw+xD1ZN56DN
 lujemau5B3kk1UTtAT4ypPqvuqjkRFqpNV2LzsJSk/Js+hApw8Y=
 =oY52
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     & unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 & WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...
2024-03-12 17:44:08 -07:00
Linus Torvalds
1f44039766 A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
 
 - Rework some of the other top-level pages for better readability and, with
   luck, fewer merge conflicts in the future.
 
 - Submit-checklist improvements, hopefully the first of many.
 
 - New Italian translations
 
 - A fair number of kernel-doc fixes and improvements.  We have also dropped
   the recommendation to use an old version of Sphinx.
 
 - A new document from Thorsten on bisection
 
 ...and lots of fixes and updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmXvKVIACgkQF0NaE2wM
 flik1gf/ZFS1mHwDdmHA/vpx8UxdUlFEo0Pms8V24iPSW5aEIqkZ406c9DSyMTtp
 CXTzW+RSCfB1Q3ciYtakHBgv0RzZ5+RyaEZ1l7zVmMyw4nYvK6giYKmg8Y0EVPKI
 fAVuPWo5iE7io0sNVbKBKJJkj9Z8QEScM48hv/CV1FblMvHYn0lie6muJrF9G6Ez
 HND+hlYZtWkbRd5M86CDBiFeGMLVPx17T+psQyQIcbUYm9b+RUqZRHIVRLYbad7r
 18r9+83DsOhXTVJCBBSfCSZwzF8yAm+eD1w47sxnSItF8OiIjqCzQgXs3BZe9TXH
 h2YyeWbMN3xByA4mEgpmOPP44RW7Pg==
 =SC60
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.9' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A moderatly busy cycle for development this time around.

   - Some cleanup of the main index page for easier navigation

   - Rework some of the other top-level pages for better readability
     and, with luck, fewer merge conflicts in the future.

   - Submit-checklist improvements, hopefully the first of many.

   - New Italian translations

   - A fair number of kernel-doc fixes and improvements. We have also
     dropped the recommendation to use an old version of Sphinx.

   - A new document from Thorsten on bisection

  ... and lots of fixes and updates"

* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
  docs: verify/bisect: fixes, finetuning, and support for Arch
  docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
  docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
  docs: submit-checklist: use subheadings
  docs: submit-checklist: structure by category
  docs: new text on bisecting which also covers bug validation
  docs: drop the version constraints for sphinx and dependencies
  docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
  docs: Restore "smart quotes" for quotes
  docs/zh_CN: accurate translation of "function"
  docs: Include simplified link titles in main index
  docs: Correct formatting of title in admin-guide/index.rst
  docs: kernel_feat.py: fix build error for missing files
  MAINTAINERS: Set the field name for subsystem profile section
  kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
  Fixed case issue with 'fault-injection' in documentation
  kernel-doc: handle #if in enums as well
  Documentation: update mailing list addresses
  doc: kerneldoc.py: fix indentation
  scripts/kernel-doc: simplify signature printing
  ...
2024-03-12 15:18:34 -07:00
Dave Jiang
c20eaf4411 cxl/region: Add sysfs attribute for locality attributes of CXL regions
Add read/write latencies and bandwidth sysfs attributes for the enabled CXL
region. The bandwidth is the aggregated bandwidth of all devices that
contribute to the CXL region. The latency is the worst latency of the
device amongst all the devices that contribute to the CXL region.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-11-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2024-03-12 12:34:11 -07:00
Pawan Gupta
8076fcde01 x86/rfds: Mitigate Register File Data Sampling (RFDS)
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.

Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.

Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.

For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
2024-03-11 13:13:48 -07:00
Jakub Kicinski
6025b9135f net: dqs: add NIC stall detector based on BQL
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?

Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.

We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.

This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).

The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.

To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.

Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.

We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08 10:23:26 +00:00
Joerg Roedel
f379a7e9c3 Merge branches 'arm/mediatek', 'arm/renesas', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next 2024-03-08 09:05:59 +01:00
Florian Eckert
96d947d4ab Documentation: leds: Update led-trigger-tty ABI description
The 'led-trigger-tty' uses the same naming in the ABI documentation as
the 'led-trigger-netdev'. Which leads to the following warning when
building the documentation.

Warning: /sys/class/leds/<led>/rx is defined 2 times:
Documentation/ABI/testing/sysfs-class-led-trigger-tty:7
Documentation/ABI/testing/sysfs-class-led-trigger-netdev:49
Warning: /sys/class/leds/<led>/tx is defined 2 times:
Documentation/ABI/testing/sysfs-class-led-trigger-tty:15
Documentation/ABI/testing/sysfs-class-led-trigger-netdev:34

Renaming the 'What' path by prefixing it with 'tty_' solves this problem.

Fixes: 6dec659896 ("leds: ledtrig-tty: Add additional line state evaluation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://lore.kernel.org/r/20240110133410.81645-1-fe@dev.tdt.de
Signed-off-by: Lee Jones <lee@kernel.org>
(cherry picked from commit ea411a8422c1d7f8193d726fb76ba09534b6a5fe)
Signed-off-by: Lee Jones <lee@kernel.org>
2024-03-07 08:47:59 +00:00
Christian Marangi
5fe5e2a3d7 docs: ABI: sysfs-class-led-trigger-netdev: Document now hidable link_*
Document now hidable link speed modes for the LED netdev trigger.

Link speed modes are now showed only if the named network device
supports them and are hidden if not.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240111160501.1774-2-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-03-07 08:47:58 +00:00
Bartosz Golaszewski
e9c717bee8 Linux 6.8-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXk5XweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGV7UH/3I5Dt0YoqFYPnTx
 yE06EJVFupqd7nDTDtduynRuMWscOmxZyYdGz8erz1fdzcFDJvlvhYwGviIRleCb
 SH89noxq7vNRsQv1QzQAe8PA3AfgGlMDtDlC/lfQyk56oCtMw3QcfwA7j/+mwCrK
 rIBi1gMlkbEzE1Tj9qAnpmJv4uyyKEvKdMwWtNy6wQWsBN2PZJXyp9LXaaqRGoPF
 B40lJHAXL7R1OpHrhIvUyC6N7BssP0ychVqNO+r4F3kPBOiqfdR1a5LoVHjsGNU3
 qC7lBaUGxBetxHRzYSq0coHDkVSlQ3DlmoMMFWt3jK/Cu1KrFoT2GKtsHHrmOc4V
 5TPEl/o=
 =0vJs
 -----END PGP SIGNATURE-----

Merge tag 'v6.8-rc7' into gpio/for-next

Linux 6.8-rc7
2024-03-05 19:24:34 +01:00
Elbert Mai
12fc84e8c4 usb: Export BOS descriptor to sysfs
Motivation
----------

The binary device object store (BOS) of a USB device consists of the BOS
descriptor followed by a set of device capability descriptors. One that is
of interest to users is the platform descriptor. This contains a 128-bit
UUID and arbitrary data, and it allows parties outside of USB-IF to add
additional metadata about a USB device in a standards-compliant manner.
Notable examples include the WebUSB and Microsoft OS 2.0 descriptors.

The kernel already retrieves and caches the BOS from USB devices if its
bcdUSB is >= 0x0201. Because the BOS is flexible and extensible, we export
the entire BOS to sysfs so users can retrieve whatever device capabilities
they desire, without requiring USB I/O or elevated permissions.

Implementation
--------------

Add bos_descriptors attribute to sysfs. This is a binary file and it works
the same way as the existing descriptors attribute. The file exists only if
the BOS is present in the USB device.

Also create a binary attribute group, so the driver core can handle the
creation of both the descriptors and bos_descriptors attributes in sysfs.

Signed-off-by: Elbert Mai <code@elbertmai.com>
Link: https://lore.kernel.org/r/20240305002301.95323-1-code@elbertmai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05 07:57:23 +00:00
Greg Kroah-Hartman
e0014ce72e IIO: 2nd set of new device support, cleanups and features for 6.9
New device support
 =================
 adi,hmc425a
 - Add support for LTC6373 Instrumentation Amplifier.
 microchip,pac1934
 - New driver supporting PAC1931, PAC1932, PAC1933 and PAC1934 power monitoring
 chips with accumulators.
 voltafield,af8133j
 - New driver for the AF8133J 3 axis magnetometer.
 
 Docs
 ====
 
 New general documentation of device buffers, and a specific section on
 the adi,adis16475 IMU
 
 Features
 ========
 
 kionix,kxcjk-1013
  - Add support for ACPI ROTM (Microsoft defined ACPI method) to get rotation
    matrix.
 ti,tmp117
 - Add missing vcc-supply control and binding.
 
 Cleanups and minor fixes
 ========================
 
 Tree-wide
 - Corrected headers to remove linux/of.h from a bunch of drivers
   that only had it to get to linux/mod_devicetable.h
 - dt binding cleanup to drop redundant type from label properties.
 
 adi,hmc425a
 - Fix constraints on GPIO array sizes for different devices.
 adi,ltc2983
 - Use spi_get_device_match_data instead of open coding similar.
 - Update naming of fw parsing function to reflect that it is not longer
   dt only.
 - Set the chip name explicitly to reduce fragility resulting from different
   entries in the various ID tables.
 bosch,bmg160
 - Add spi-max-frequency property and limit to dt-binding.
 microchip,mcp320x
 - Use devm_* to simplify device removal and error handling.
 nxp,imx93
 - Drop a non existent 4th interrupt from bindings.
 qcom,mp8xxx-xoadc
 - Drop unused kerneldoc
 renesas,isl29501
 - Actually use the of_match table.
 rockchip,saradc
 - Fix channel bitmask
 - Fix write masks
 - Replace custom handling of optional reset control with how it should be
   done.
 ti,ads1298
 - Fix error code to not return a successfully obtained regulator.
 - Avoid a divide by zero when setting frequency.
 ti,hdc2010
 - Add missing interrupts dt binding property
 vishay,veml6075
 - Make vdd-supply required in the dt-binding.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmXg4XsRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohHeQ/+K0311HpyObnlWdD4157NltaVlbLqg8OM
 +N7OmVzFOySJKd4nmISpHDXkSnSYCDD6O/0HfzrmcrPaP1MPxgo3L4WcQ9JbJokW
 5hwalY3Mx9Ueds1mpAulNai3veREqqF5Ak/sobBoZTZv20YwJCr2n+6HsgolXI7n
 40RzoMeW+GZinKatXPrt4/IRj14n4I2B0z/ykotA1kXl11vVbTDu26OZ5yqePRBB
 P6EnFhgqvMfjsnNytCkp7id8yiDKFPeRDEZjHbDaMai7Iwu5/HdA2OjgKIf4ybLo
 7b+C/XjoY9e9Dze/7DCN/yF7kFsqe1CTeb8vbx8S+bcbJq/a4IqUh9f5eMivtoC5
 /ml8f+uer9Fji6SASGgqRCEf/GkVnCweKTGTMkQglJ5TDQpjW6HkgTa8ttCiYTy8
 Pfk0s3FtIjbYEyl+W5PXmyNhAnJsUUUUFvXBG+ePzEVbamhJvelI8rfNCrUHFe0M
 P99ordhaYkaQdxHvc63abvU8XldSKJHeevGkYrGntGYOiQoaUZr6kfr3nqRgQPq4
 T35T6wy2guPbkmtClEAPQvYNlFOsz3Liqv52tPDHE+WAbSffKr1loOU2hn0tOLfc
 wXHpKD2YTkFuC6aDCE8JMtzFfCfbFM8AfKVEnoN6LaoCzunQKS7D7l93rxRs6zh/
 cFppD34t8do=
 =WVBs
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-6.9b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, cleanups and features for 6.9

New device support
=================
adi,hmc425a
- Add support for LTC6373 Instrumentation Amplifier.
microchip,pac1934
- New driver supporting PAC1931, PAC1932, PAC1933 and PAC1934 power monitoring
chips with accumulators.
voltafield,af8133j
- New driver for the AF8133J 3 axis magnetometer.

Docs
====

New general documentation of device buffers, and a specific section on
the adi,adis16475 IMU

Features
========

kionix,kxcjk-1013
 - Add support for ACPI ROTM (Microsoft defined ACPI method) to get rotation
   matrix.
ti,tmp117
- Add missing vcc-supply control and binding.

Cleanups and minor fixes
========================

Tree-wide
- Corrected headers to remove linux/of.h from a bunch of drivers
  that only had it to get to linux/mod_devicetable.h
- dt binding cleanup to drop redundant type from label properties.

adi,hmc425a
- Fix constraints on GPIO array sizes for different devices.
adi,ltc2983
- Use spi_get_device_match_data instead of open coding similar.
- Update naming of fw parsing function to reflect that it is not longer
  dt only.
- Set the chip name explicitly to reduce fragility resulting from different
  entries in the various ID tables.
bosch,bmg160
- Add spi-max-frequency property and limit to dt-binding.
microchip,mcp320x
- Use devm_* to simplify device removal and error handling.
nxp,imx93
- Drop a non existent 4th interrupt from bindings.
qcom,mp8xxx-xoadc
- Drop unused kerneldoc
renesas,isl29501
- Actually use the of_match table.
rockchip,saradc
- Fix channel bitmask
- Fix write masks
- Replace custom handling of optional reset control with how it should be
  done.
ti,ads1298
- Fix error code to not return a successfully obtained regulator.
- Avoid a divide by zero when setting frequency.
ti,hdc2010
- Add missing interrupts dt binding property
vishay,veml6075
- Make vdd-supply required in the dt-binding.

* tag 'iio-for-6.9b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
  dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency
  dt-bindings: iio: adc: imx93: drop the 4th interrupt
  iio: proximity: isl29501: make use of of_device_id table
  iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member
  dt-bindings: iio: adc: drop redundant type from label
  dt-bindings: iio: ti,tmp117: add optional label property
  MAINTAINERS: Add an entry for AF8133J driver
  iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
  dt-bindings: iio: magnetometer: Add Voltafield AF8133J
  dt-bindings: vendor-prefix: Add prefix for Voltafield
  iio: adc: rockchip_saradc: replace custom logic with devm_reset_control_get_optional_exclusive
  iio: adc: rockchip_saradc: use mask for write_enable bitfield
  iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2
  dt-bindings: iio: light: vishay,veml6075: make vdd-supply required
  iio: adc: adding support for PAC193x
  dt-bindings: iio: adc: adding support for PAC193X
  iio: temperature: ltc2983: explicitly set the name in chip_info
  iio: temperature: ltc2983: rename ltc2983_parse_dt()
  iio: temperature: ltc2983: make use of spi_get_device_match_data()
  iio: adc: ti-ads1298: prevent divide by zero in ads1298_set_samp_freq()
  ...
2024-03-02 20:02:18 +01:00
Greg Kroah-Hartman
bac2f2cfe2 coresight: hwtracing subsystem updates for v6.9
Changes targeting Linux v6.9 include:
  - CoreSight: Enable W=1 warnings as default
  - CoreSight: Clean up sysfs/perf mode handling for tracing
  - Support for Qualcomm TPDM CMB Dataset
  - Miscellaneous fixes to the CoreSight subsystem
  - Fix for hisi_ptt PMU to reject events targeting other PMUs
 
 Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuFy0byloRoXZHaWBxcXRZPKyBqEFAmXfD1gACgkQxcXRZPKy
 BqEbiRAAks3YgMt1PC610hhvDFps3GoedEGnJBLajtdh7v/gWP6a/LYIP7YU9dkA
 pskkhvvZm87PdCu9vc7r2NaYVb+8rVyTdafd2DjA1HAdOK2/BoT6tJQzwG3W62EE
 0hvRTAgoq40jU4pix1s/wiQjFYa0l98cN85mu6HmMaWu+ulDgEAudcCyqX4kiY+k
 S1llq7m5JlQdobcDa2a2IbU8L6t6m9hPittgHZwvXBy9OxFJ6GDLoKO0YOn2mp8W
 yZa1fMAlkCG4asRZyhLb/mRubzVRHfYrJOvgZUJGV67fRUPU/Lwsx5WAwy4NECv5
 rooiXEw5TVaQ9/l18W0Zj2WAveVWLGI5HGmIywZ4HEc8fukLWsgLG78Bomu2FkGD
 Is9mgeXL8oXfGufEHvCxOvI53rHg3tBLsX13mPylkFH+DAD3EPZ8ASoQOa0SbCpV
 fp8SBznv8q8mHBiFR6Mb4qSDkIjq7h9ygNXzTh1j5BMEf06oTbasNiHmi62dSZsa
 uYlnPBmSZ0OgvQjRhvdlVKRQIbbni2Ddt93Wnl/6tPvwcv6MmnTKi2cmTZ9IrFPn
 QFeSeU19gLlAjNAF/1BtubaV0Z4Sj3Tks6TpCcLT4em+Z57efRW9ZGwOGrRsHHiB
 P0SXCNLiVsAkpZP9wVryEYjb0CnlRljKqiNSO9p3AGhkPJpDhyc=
 =cz5l
 -----END PGP SIGNATURE-----

Merge tag 'coresight-next-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next

Suzuki writes:

coresight: hwtracing subsystem updates for v6.9

Changes targeting Linux v6.9 include:
 - CoreSight: Enable W=1 warnings as default
 - CoreSight: Clean up sysfs/perf mode handling for tracing
 - Support for Qualcomm TPDM CMB Dataset
 - Miscellaneous fixes to the CoreSight subsystem
 - Fix for hisi_ptt PMU to reject events targeting other PMUs

Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

* tag 'coresight-next-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits)
  coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits
  dt-bindings: arm: qcom,coresight-tpdm: Rename qcom,dsb-element-size
  hwtracing: hisi_ptt: Move type check to the beginning of hisi_ptt_pmu_event_init()
  coresight: tpdm: Fix build break due to uninitialised field
  coresight: etm4x: Set skip_power_up in etm4_init_arch_data function
  coresight-tpdm: Add msr register support for CMB
  dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
  coresight-tpdm: Add timestamp control register support for the CMB
  coresight-tpdm: Add pattern registers support for CMB
  coresight-tpdm: Add support to configure CMB
  coresight-tpda: Add support to configure CMB element
  coresight-tpdm: Add CMB dataset support
  dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
  coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  coresight-tpdm: Optimize the store function of tpdm simple dataset
  coresight: Add helper for setting csdev->mode
  coresight: Add a helper for getting csdev->mode
  coresight: Add helper for atomically taking the device
  coresight: Add explicit member initializers to coresight_dev_type
  coresight: Remove unused stubs
  ...
2024-03-02 19:58:26 +01:00
Jingqi Liu
967912a3a5 iommu/vt-d: Add the document for Intel IOMMU debugfs
This document guides users to dump the Intel IOMMU internals by debugfs.

Signed-off-by: Jingqi Liu <Jingqi.liu@intel.com>
Link: https://lore.kernel.org/r/20240207090742.23857-1-Jingqi.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-03-01 13:51:19 +01:00
Chao Yu
8b10d36537 f2fs: introduce FAULT_NO_SEGMENT
Use it to simulate no free segment case during block allocation.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-02-29 08:34:34 -08:00
Marius Cristea
0fb528c825 iio: adc: adding support for PAC193x
This is the iio driver for Microchip
PAC193X series of Power Monitor with Accumulator chip family.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20240222164206.65700-3-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-28 19:26:37 +00:00
Jeffrey Hugo
3ae768a132 f2fs: doc: Fix bouncing email address for Sahitya Tummala
The servers for the @codeaurora domain are long retired and any messages
addressed there will bounce.  Sahitya Tummala has a .mailmap entry to an
updated address, but the documentation files still list @codeaurora
which might be a problem for anyone reading the documentation directly.
Update the documentation files to match the .mailmap update.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-02-27 09:41:15 -08:00
Javier Carrasco
b86d760153 ABI: sysfs-class-hwmon: add descriptions for humidity min/max alarms
This attributes have been recently introduced and require the
corresponding ABI documentation.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-3-260bea05cf9b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-02-25 12:37:37 -08:00
SeongJae Park
adc3908b3c Docs/ABI/damon: document quota goal metric file
Update DAMON ABI document for the quota goal target_metric file.

Link: https://lkml.kernel.org/r/20240219194431.159606-17-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-23 17:48:29 -08:00
SeongJae Park
68c4905bba Docs/ABI/damon: document effective_bytes sysfs file
Update the DAMON ABI doc for the effective_bytes sysfs file and the
kdamond state file input command for updating the content of the file.

Link: https://lkml.kernel.org/r/20240219194431.159606-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-23 17:48:26 -08:00
Giovanni Cabiddu
2ecd43413d Documentation: qat: fix auto_reset section
Remove unneeded colon in the auto_reset section.

This resolves the following errors when building the documentation:

    Documentation/ABI/testing/sysfs-driver-qat:146: ERROR: Unexpected indentation.
    Documentation/ABI/testing/sysfs-driver-qat:146: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: f5419a4239 ("crypto: qat - add auto reset on error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-kernel/20240212144830.70495d07@canb.auug.org.au/T/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-24 08:41:19 +08:00
Stefan Hajnoczi
a8f62f50b4 virtiofs: export filesystem tags through sysfs
The virtiofs filesystem is mounted using a "tag" which is exported by
the virtiofs device:

  # mount -t virtiofs <tag> /mnt

The virtiofs driver knows about all the available tags but these are
currently not exported to user space.

People have asked for these tags to be exported to user space. Most
recently Lennart Poettering has asked for it as he wants to scan the
tags and mount virtiofs automatically in certain cases.

https://gitlab.com/virtio-fs/virtiofsd/-/issues/128

This patch exports tags at /sys/fs/virtiofs/<N>/tag where N is the id of
the virtiofs device. The filesystem tag can be obtained by reading this
"tag" file.

There is also a symlink at /sys/fs/virtiofs/<N>/device that points to
the virtiofs device that exports this tag.

This patch converts the existing struct virtio_fs into a full kobject.
It already had a refcount so it's an easy change. The virtio_fs objects
can then be exposed in a kset at /sys/fs/virtiofs/. Note that virtio_fs
objects may live slightly longer than we wish for them to be exposed to
userspace, so kobject_del() is called explicitly when the underlying
virtio_device is removed. The virtio_fs object is freed when all
references are dropped (e.g. active mounts) but disappears as soon as
the virtiofs device is gone.

Originally-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-02-23 09:40:26 +01:00
Anshuman Khandual
b9ad003af1 mm/cma: add sysfs file 'release_pages_success'
This adds the following new sysfs file tracking the number of successfully
released pages from a given CMA heap area.  This file will be available
via CONFIG_CMA_SYSFS and help in determining active CMA pages available on
the CMA heap area.  This adds a new 'nr_pages_released' (CONFIG_CMA_SYSFS)
into 'struct cma' which gets updated during cma_release().

/sys/kernel/mm/cma/<cma-heap-area>/release_pages_success

After this change, an user will be able to find active CMA pages available
in a given CMA heap area via the following method.

Active pages = alloc_pages_success - release_pages_success

That's valuable information for both software designers, and system admins
as it allows them to tune the number of CMA pages available in the system.
This increases user visibility for allocated CMA area and its
utilization.

Link: https://lkml.kernel.org/r/20240206045731.472759-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22 10:24:57 -08:00
Rakie Kim
dce41f5ae2 mm/mempolicy: implement the sysfs-based weighted_interleave interface
Patch series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension", v5.

Weighted interleave is a new interleave policy intended to make use of
heterogeneous memory environments appearing with CXL.

The existing interleave mechanism does an even round-robin distribution of
memory across all nodes in a nodemask, while weighted interleave
distributes memory across nodes according to a provided weight.  (Weight =
# of page allocations per round)

Weighted interleave is intended to reduce average latency when bandwidth
is pressured - therefore increasing total throughput.

In other words: It allows greater use of the total available bandwidth in
a heterogeneous hardware environment (different hardware provides
different bandwidth capacity).

As bandwidth is pressured, latency increases - first linearly and then
exponentially.  By keeping bandwidth usage distributed according to
available bandwidth, we therefore can reduce the average latency of a
cacheline fetch.

A good explanation of the bandwidth vs latency response curve:
https://mahmoudhatem.wordpress.com/2017/11/07/memory-bandwidth-vs-latency-response-curve/

From the article:
```
Constant region:
    The latency response is fairly constant for the first 40%
    of the sustained bandwidth.
Linear region:
    In between 40% to 80% of the sustained bandwidth, the
    latency response increases almost linearly with the bandwidth
    demand of the system due to contention overhead by numerous
    memory requests.
Exponential region:
    Between 80% to 100% of the sustained bandwidth, the memory
    latency is dominated by the contention latency which can be
    as much as twice the idle latency or more.
Maximum sustained bandwidth :
    Is 65% to 75% of the theoretical maximum bandwidth.
```

As a general rule of thumb:
* If bandwidth usage is low, latency does not increase. It is
  optimal to place data in the nearest (lowest latency) device.
* If bandwidth usage is high, latency increases. It is optimal
  to place data such that bandwidth use is optimized per-device.

This is the top line goal: Provide a user a mechanism to target using the
"maximum sustained bandwidth" of each hardware component in a heterogenous
memory system.


For example, the stream benchmark demonstrates that 1:1 (default)
interleave is actively harmful, while weighted interleave can be
beneficial.  Default interleave distributes data such that too much
pressure is placed on devices with lower available bandwidth.

Stream Benchmark (vs DRAM, 1 Socket + 1 CXL Device)
Default interleave : -78% (slower than DRAM)
Global weighting   : -6% to +4% (workload dependant)
Targeted weights   : +2.5% to +4% (consistently better than DRAM)

Global means the task-policy was set (set_mempolicy), while targeted means
VMA policies were set (mbind2).  We see weighted interleave is not always
beneficial when applied globally, but is always beneficial when applied to
bandwidth-driving memory regions.


There are 4 patches in this set:
1) Implement system-global interleave weights as sysfs extension
   in mm/mempolicy.c.  These weights are RCU protected, and a
   default weight set is provided (all weights are 1 by default).

   In future work, we intend to expose an interface for HMAT/CDAT
   code to set reasonable default values based on the memory
   configuration of the system discovered at boot/hotplug.

2) A mild refactor of some interleave-logic for re-use in the
   new weighted interleave logic.

3) MPOL_WEIGHTED_INTERLEAVE extension for set_mempolicy/mbind

4) Protect interleave logic (weighted and normal) with the
   mems_allowed seq cookie.  If the nodemask changes while
   accessing it during a rebind, just retry the access.

Included below are some performance and LTP test information,
and a sample numactl branch which can be used for testing.

= Performance summary =
(tests may have different configurations, see extended info below)
1) MLC (W2) : +38% over DRAM. +264% over default interleave.
   MLC (W5) : +40% over DRAM. +226% over default interleave.
2) Stream   : -6% to +4% over DRAM, +430% over default interleave.
3) XSBench  : +19% over DRAM. +47% over default interleave.

= LTP Testing Summary =
existing mempolicy & mbind tests: pass
mempolicy & mbind + weighted interleave (global weights): pass

= version history
v5:
- style fixes
- mems_allowed cookie protection to detect rebind issues,
  prevents spurious allocation failures and/or mis-allocations
- sparse warning fixes related to __rcu on local variables

=====================================================================
Performance tests - MLC
From - Ravi Jonnalagadda <ravis.opensrc@micron.com>

Hardware: Single-socket, multiple CXL memory expanders.

Workload:                               W2
Data Signature:                         2:1 read:write
DRAM only bandwidth (GBps):             298.8
DRAM + CXL (default interleave) (GBps): 113.04
DRAM + CXL (weighted interleave)(GBps): 412.5
Gain over DRAM only:                    1.38x
Gain over default interleave:           2.64x

Workload:                               W5
Data Signature:                         1:1 read:write
DRAM only bandwidth (GBps):             273.2
DRAM + CXL (default interleave) (GBps): 117.23
DRAM + CXL (weighted interleave)(GBps): 382.7
Gain over DRAM only:                    1.4x
Gain over default interleave:           2.26x

=====================================================================
Performance test - Stream
From - Gregory Price <gregory.price@memverge.com>

Hardware: Single socket, single CXL expander
numactl extension: https://github.com/gmprice/numactl/tree/weighted_interleave_master

Summary: 64 threads, ~18GB workload, 3GB per array, executed 100 times
Default interleave : -78% (slower than DRAM)
Global weighting   : -6% to +4% (workload dependant)
mbind2 weights     : +2.5% to +4% (consistently better than DRAM)

dram only:
numactl --cpunodebind=1 --membind=1 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Function     Direction    BestRateMBs     AvgTime      MinTime      MaxTime
Copy:        0->0            200923.2     0.032662     0.031853     0.033301
Scale:       0->0            202123.0     0.032526     0.031664     0.032970
Add:         0->0            208873.2     0.047322     0.045961     0.047884
Triad:       0->0            208523.8     0.047262     0.046038     0.048414

CXL-only:
numactl --cpunodebind=1 -w --membind=2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy:        0->0             22209.7     0.288661     0.288162     0.289342
Scale:       0->0             22288.2     0.287549     0.287147     0.288291
Add:         0->0             24419.1     0.393372     0.393135     0.393735
Triad:       0->0             24484.6     0.392337     0.392083     0.394331

Based on the above, the optimal weights are ~9:1
echo 9 > /sys/kernel/mm/mempolicy/weighted_interleave/node1
echo 1 > /sys/kernel/mm/mempolicy/weighted_interleave/node2

default interleave:
numactl --cpunodebind=1 --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy:        0->0             44666.2     0.143671     0.143285     0.144174
Scale:       0->0             44781.6     0.143256     0.142916     0.143713
Add:         0->0             48600.7     0.197719     0.197528     0.197858
Triad:       0->0             48727.5     0.197204     0.197014     0.197439

global weighted interleave:
numactl --cpunodebind=1 -w --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy:        0->0            190085.9     0.034289     0.033669     0.034645
Scale:       0->0            207677.4     0.031909     0.030817     0.033061
Add:         0->0            202036.8     0.048737     0.047516     0.053409
Triad:       0->0            217671.5     0.045819     0.044103     0.046755

targted regions w/ global weights (modified stream to mbind2 malloc'd regions))
numactl --cpunodebind=1 --membind=1 ./stream_c.exe -b --ntimes 100 --array-size 400M --malloc
Copy:        0->0            205827.0     0.031445     0.031094     0.031984
Scale:       0->0            208171.8     0.031320     0.030744     0.032505
Add:         0->0            217352.0     0.045087     0.044168     0.046515
Triad:       0->0            216884.8     0.045062     0.044263     0.046982

=====================================================================
Performance tests - XSBench
From - Hyeongtak Ji <hyeongtak.ji@sk.com>

Hardware: Single socket, Single CXL memory Expander

NUMA node 0: 56 logical cores, 128 GB memory
NUMA node 2: 96 GB CXL memory
Threads:     56
Lookups:     170,000,000

Summary: +19% over DRAM. +47% over default interleave.

Performance tests - XSBench
1. dram only
$ numactl -m 0 ./XSBench -s XL –p 5000000
Runtime:     36.235 seconds
Lookups/s:   4,691,618

2. default interleave
$ numactl –i 0,2 ./XSBench –s XL –p 5000000
Runtime:     55.243 seconds
Lookups/s:   3,077,293

3. weighted interleave
numactl –w –i 0,2 ./XSBench –s XL –p 5000000
Runtime:     29.262 seconds
Lookups/s:   5,809,513

=====================================================================
LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2

= Existing tests
set_mempolicy, get_mempolicy, mbind

MPOL_WEIGHTED_INTERLEAVE added manually to test basic functionality but
did not adjust tests for weighting.  Basically the weights were set to 1,
which is the default, and it should behave the same as MPOL_INTERLEAVE if
logic is correct.

== set_mempolicy01 : passed   18, failed   0
== set_mempolicy02 : passed   10, failed   0
== set_mempolicy03 : passed   64, failed   0
== set_mempolicy04 : passed   32, failed   0
== set_mempolicy05 - n/a on non-x86
== set_mempolicy06 : passed   10, failed   0
   this is set_mempolicy02 + MPOL_WEIGHTED_INTERLEAVE
== set_mempolicy07 : passed   32, failed   0
   set_mempolicy04 + MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy01 : passed   12, failed   0
   change: added MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy02 : passed   2, failed   0
== mbind01 : passed   15, failed   0
   added MPOL_WEIGHTED_INTERLEAVE
== mbind02 : passed   4, failed   0
   added MPOL_WEIGHTED_INTERLEAVE
== mbind03 : passed   16, failed   0
   added MPOL_WEIGHTED_INTERLEAVE
== mbind04 : passed   48, failed   0
   added MPOL_WEIGHTED_INTERLEAVE

=====================================================================
numactl (set_mempolicy) w/ global weighting test
numactl fork: https://github.com/gmprice/numactl/tree/weighted_interleave_master

command: numactl -w --interleave=0,1 ./eatmem

result (weights 1:1):
0176a000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=32897 N1=32896 kernelpagesize_kB=4
7fceeb9ff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=32768 N1=32769 kernelpagesize_kB=4
50% distribution is correct

result (weights 5:1):
01b14000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=54828 N1=10965 kernelpagesize_kB=4
7f47a1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54614 N1=10923 kernelpagesize_kB=4
16.666% distribution is correct

result (weights 1:5):
01f07000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=10966 N1=54827 kernelpagesize_kB=4
7f17b1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=10923 N1=54614 kernelpagesize_kB=4
16.666% distribution is correct

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main (void)
{
        char* mem = malloc(1024*1024*256);
        memset(mem, 1, 1024*1024*256);
        for (int i = 0; i  < ((1024*1024*256)/4096); i++)
        {
                mem = malloc(4096);
                mem[0] = 1;
        }
        printf("done\n");
        getchar();
        return 0;
}


This patch (of 4):

This patch provides a way to set interleave weight information under sysfs
at /sys/kernel/mm/mempolicy/weighted_interleave/nodeN

The sysfs structure is designed as follows.

  $ tree /sys/kernel/mm/mempolicy/
  /sys/kernel/mm/mempolicy/ [1]
  └── weighted_interleave [2]
      ├── node0 [3]
      └── node1

Each file above can be explained as follows.

[1] mm/mempolicy: configuration interface for mempolicy subsystem

[2] weighted_interleave/: config interface for weighted interleave policy

[3] weighted_interleave/nodeN: weight for nodeN

If a node value is set to `0`, the system-default value will be used.
As of this patch, the system-default for all nodes is always 1.

Link: https://lkml.kernel.org/r/20240202170238.90004-1-gregory.price@memverge.com
Link: https://lkml.kernel.org/r/20240202170238.90004-2-gregory.price@memverge.com
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Co-developed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Co-developed-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Gregory Price <gourry.memverge@gmail.com>
Cc: Hasan Al Maruf <Hasan.Maruf@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22 10:24:46 -08:00
Vishal Verma
73954d379e dax: add a sysfs knob to control memmap_on_memory behavior
Add a sysfs knob for dax devices to control the memmap_on_memory setting
if the dax device were to be hotplugged as system memory.

The default memmap_on_memory setting for dax devices originating via pmem
or hmem is set to 'false' - i.e.  no memmap_on_memory semantics, to
preserve legacy behavior.  For dax devices via CXL, the default is on. 
The sysfs control allows the administrator to override the above defaults
if needed.

Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-5-20d16cb8d23d@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Huang, Ying <ying.huang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22 10:24:40 -08:00
Vishal Verma
51e7849cd6 Documentatiion/ABI: add ABI documentation for sys-bus-dax
Add the missing sysfs ABI documentation for the device DAX subsystem.
Various ABI attributes under this have been present since v5.1, and more
have been added over time. In preparation for adding a new attribute,
add this file with the historical details.

Link: https://lkml.kernel.org/r/20240124-vv-dax_abi-v7-3-20d16cb8d23d@intel.com
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-22 10:24:40 -08:00
Konstantin Ryabitsev
27103dddc2 Documentation: update mailing list addresses
The mailman2 server running on lists.linuxfoundation.org will be shut
down in very imminent future. Update all instances of obsolete list
addresses throughout the tree with their new destinations.

Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240214-lf-org-list-migration-v1-1-ef1eab4b1543@linuxfoundation.org
2024-02-21 13:44:21 -07:00
Mark Brown
b96ccdcf9d
ASoC: Intel: avs: Fixes and new platforms support
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:

SKL <- APL <- CNL <- ICL <- TGL

rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.

Layout of the patchset:

First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.

Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.

The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
2024-02-21 00:52:26 +00:00
Greg Kroah-Hartman
a09ebb32af Merge 6.8-rc5 into usb-next
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19 09:13:29 +01:00
Linus Torvalds
7efc0eb825 Char/Misc changes for 6.8-rc5
Here is a small set of char/misc and IIO driver fixes for 6.8-rc5
 
 Included in here are:
   - lots of iio driver fixes for reported issues
   - nvmem device naming fixup for reported problem
   - interconnect driver fixes for reported issues
 
 All of these have been in linux-next for a while with no reported the
 issues (the nvmem patch was included in a different branch in linux-next
 before sent to me for inclusion here.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdC4jQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykGSACdEb+xhXVI0SeTGb9mSDwcYk3MWz8AoKo/ivvf
 LCLRlZfd5ajqfahZzVt/
 =Zy4F
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / miscdriver fixes from Greg KH:
 "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.

  Included in here are:

   - lots of iio driver fixes for reported issues

   - nvmem device naming fixup for reported problem

   - interconnect driver fixes for reported issues

  All of these have been in linux-next for a while with no reported the
  issues (the nvmem patch was included in a different branch in
  linux-next before sent to me for inclusion here)"

* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  nvmem: include bit index in cell sysfs file name
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  interconnect: qcom: x1e80100: Add missing ACV enable_mask
  interconnect: qcom: sm8650: Use correct ACV enable_mask
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
  interconnect: qcom: sm8550: Enable sync_state
  ...
2024-02-17 08:52:38 -08:00
Heikki Krogerus
9a270ec7bf usb: roles: Link the switch to its connector
This is probable useful information to have in user space in
general, but it's primarily needed for the xHCI DbC (Debug
Capability). When xHCI DbC is being used, the USB port needs
to be muxed to the xHCI even in device role. In xHCI DbC mode,
the xHCI is the USB device controller.

Tested-by: Uday Bhat <uday.m.bhat@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20240213130018.3029991-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-17 17:02:42 +01:00
Weili Qian
ce133a2212 crypto: hisilicon/qm - obtain stop queue status
The debugfs files 'dev_state' and 'dev_timeout' are added.
Users can query the current queue stop status through these two
files. And set the waiting timeout when the queue is released.

dev_state: if dev_timeout is set, dev_state indicates the status
of stopping the queue. 0 indicates that the queue is stopped
successfully. Other values indicate that the queue stops fail.
If dev_timeout is not set, the value of dev_state is 0;

dev_timeout: if the queue fails to stop, the queue is released
after waiting dev_timeout * 20ms.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-02-17 09:09:16 +08:00
Arnd Bergmann
e20f378d99 nvmem: include bit index in cell sysfs file name
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with

[    0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[    0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S                 6.8.0-rc1-arnd-5+ #133
[    0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[    0.605362] Call trace:
[    0.605365]  show_stack+0x18/0x2c
[    0.605374]  dump_stack_lvl+0x60/0x80
[    0.605383]  dump_stack+0x18/0x24
[    0.605388]  sysfs_warn_dup+0x64/0x80
[    0.605395]  sysfs_add_bin_file_mode_ns+0xb0/0xd4
[    0.605402]  internal_create_group+0x268/0x404
[    0.605409]  sysfs_create_groups+0x38/0x94
[    0.605415]  devm_device_add_groups+0x50/0x94
[    0.605572]  nvmem_populate_sysfs_cells+0x180/0x1b0
[    0.605682]  nvmem_register+0x38c/0x470
[    0.605789]  devm_nvmem_register+0x1c/0x6c
[    0.605895]  apple_efuses_probe+0xe4/0x120
[    0.606000]  platform_probe+0xa8/0xd0

As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.

Fixes: 0331c61194 ("nvmem: core: Expose cells through sysfs")
Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156
Cc:  <regressions@lists.linux.dev>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Rafał Miłecki <rafal@milecki.pl>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:  <asahi@lists.linux.dev>
Cc: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-14 16:28:16 +01:00
Breno Leitao
5b3fbd61b9 net: sysfs: Fix /sys/class/net/<iface> path for statistics
The Documentation/ABI/testing/sysfs-class-net-statistics documentation
is pointing to the wrong path for the interface.  Documentation is
pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>.

Fix it by adding the `net/` directory before the interface.

Fixes: 6044f97006 ("net: sysfs: document /sys/class/net/statistics/*")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12 12:13:50 +00:00