The HX3 comes in different variants (up to 4 USB 3.0 ports; multi-TT),
e.g. CYUSB330x/CYUSB331x/CYUSB332x/CYUSB230x. It operates with two
different power supplies: 1V2 and 3V3.
Add the support for this hub, for controlling the reset pin and the
power supplies.
Reset time is extracted from data sheet, page 24:
"The RESETN pin can be tied to VDD_IO through an external resistor and
to ground (GND) through an external capacitor (minimum 5 ms time
constant)."
V_IH min is given at 0.7 * 3V3 (page 34), therefore use 10ms.
Also add USB PIDs for the USB 2.0 and USB 3.0 root hub.
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230620-hx3-v7-2-f79b4b22a1bf@skidata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As some of the onboard hubs require multiple power supplies, provide the
environment to support them.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230620-hx3-v7-1-f79b4b22a1bf@skidata.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Genesys Logic GL3523 is a 4-port USB 3.1 hub that has a reset pin to
toggle and a 5.0V core supply exported though an integrated LDO is
available for powering it.
Add the support for this hub, for controlling the reset pin and the core
power supply.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
[m.felsch@pengutronix.de: include review feedback & port to 6.4]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230623142228.4069084-2-m.felsch@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If onboard_hub_power_off() called by onboard_hub_remove() fails it emits
an error message. Forwarding the returned error value to the driver core
results in another error message. As the return value is otherwise
ignored, just drop the return value. There is no side effect apart from
suppressing the core's warning.
Instead of returning zero unconditionally, convert to .remove_new()
which has the same semantics as .remove() that unconditionally returns
zero.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230530073633.2193618-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub
driver. Adopt the generic usb-device compatible ("usbVID,PID").
This hub has the same reset timings as USB2514, so reuse that one.
There is also an USB2517I which just has industrial temperature range.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230223073920.2912298-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the USB fixes in here and this resolves merge conflicts as
reported in linux-next in the following files:
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VIA LAB VL817 is a 4-port USB 3.1 hub and USB 2.0 root hub
that has a reset pin to toggle and a 5.0V core supply exported
though an integrated LDO is available for powering it.
Add the support for this hub, for controlling the reset pin and
the core power supply.
Add USB device id's for USB 2.0 and USB 3.0 root hub.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230118044418.875-9-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Genesys Logic GL852G is a 4-port USB 2.0 STT hub that has a reset pin to
toggle and a 5.0V core supply exported though an integrated LDO is
available for powering it.
Add the support for this hub, for controlling the reset pin and the core
power supply.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230118044418.875-5-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently each onboard_hub platform device owns an 'attach' work,
which is scheduled when the device probes. With this deadlocks
have been reported on a Raspberry Pi 3 B+ [1], which has nested
onboard hubs.
The flow of the deadlock is something like this (with the onboard_hub
driver built as a module) [2]:
- USB root hub is instantiated
- core hub driver calls onboard_hub_create_pdevs(), which creates the
'raw' platform device for the 1st level hub
- 1st level hub is probed by the core hub driver
- core hub driver calls onboard_hub_create_pdevs(), which creates
the 'raw' platform device for the 2nd level hub
- onboard_hub platform driver is registered
- platform device for 1st level hub is probed
- schedules 'attach' work
- platform device for 2nd level hub is probed
- schedules 'attach' work
- onboard_hub USB driver is registered
- device (and parent) lock of hub is held while the device is
re-probed with the onboard_hub driver
- 'attach' work (running in another thread) calls driver_attach(), which
blocks on one of the hub device locks
- onboard_hub_destroy_pdevs() is called by the core hub driver when one
of the hubs is detached
- destroying the pdevs invokes onboard_hub_remove(), which waits for the
'attach' work to complete
- waits forever, since the 'attach' work can't acquire the device lock
Use a single work struct for the driver instead of having a work struct
per onboard hub platform driver instance. With that it isn't necessary
to cancel the work in onboard_hub_remove(), which fixes the deadlock.
The work is only cancelled when the driver is unloaded.
[1] https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/
[2] https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/
Cc: stable@vger.kernel.org
Fixes: 8bc063641c ("usb: misc: Add onboard_usb_hub driver")
Link: https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/
Link: https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230110172954.v2.2.I16b51f32db0c32f8a8532900bfe1c70c8572881a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The onboard_hub 'driver' consists of two drivers, a platform
driver and a USB driver. Currently when the onboard hub driver
is initialized it first registers the platform driver, then the
USB driver. This results in a race condition when the 'attach'
work is executed, which is scheduled when the platform device
is probed. The purpose of fhe 'attach' work is to bind elegible
USB hub devices to the onboard_hub USB driver. This fails if
the work runs before the USB driver has been registered.
Register the USB driver first, then the platform driver. This
increases the chances that the onboard_hub USB devices are probed
before their corresponding platform device, which the USB driver
tries to locate in _probe(). The driver already handles this
situation and defers probing if the onboard hub platform device
doesn't exist yet.
Cc: stable@vger.kernel.org
Fixes: 8bc063641c ("usb: misc: Add onboard_usb_hub driver")
Link: https://lore.kernel.org/lkml/Y6W00vQm3jfLflUJ@hovoldconsulting.com/T/#m0d64295f017942fd988f7c53425db302d61952b4
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230110172954.v2.1.I75494ebee7027a50235ce4b1e930fa73a578fbe2@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Genesys Logic GL850G is a 4-port USB 2.0 STT hub that has a reset pin to
toggle and a 3.3V core supply exported (although an integrated LDO is
available for powering it with 5V).
Add the support for this hub, for controlling the reset pin and the core
power supply.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20221206055228.306074-4-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
onboard_hub_power_off() currently has a delay after asserting the
reset of the hub. There is already a delay in onboard_hub_power_on()
before de-asserting the reset, which ensures that the reset is
asserted for the required time, so the delay in _power_off() is not
needed.
Skip the reset GPIO check before calling gpiod_set_value_cansleep(),
the function returns early when the GPIO descriptor is NULL.
Reviewed-By: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220805111836.1.Id5a4dc0a2c046236116693aa55672295513a0f2a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
onboard_hub_power_on() already ensures the reset pulse width delay, so
there is no need to wait right after requesting GPIO as well.
Fixes: 40758e493f ("usb: misc: onboard_usb_hub: Add reset-gpio support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220728064937.917935-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Despite default reset upon probe, release reset line after powering up
the hub and assert reset again before powering down.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220727141117.909361-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for Microchip USB2514B USB 2.0 hub to the onboard usb hub
driver. Adopt the generic usb-device compatible ("usbVID,PID").
Some STM32MP1 boards have this hub on-board, with a supply that needs to
be enabled for proper operation.
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220726080708.162547-3-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
