mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
58ff537109
3757 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Samuel Holland
|
58ff537109
|
riscv: Omit optimized string routines when using KASAN
The optimized string routines are implemented in assembly, so they are not instrumented for use with KASAN. Fall back to the C version of the routines in order to improve KASAN coverage. This fixes the kasan_strings() unit test. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240801033725.28816-2-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Linus Torvalds
|
c9f33436d8 |
RISC-V Patches for the 6.11 Merge Window, Part 2
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. * The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. * Support for HAVE_ARCH_STACKLEAK. * The sv39 linear map has been extended to support 128GiB mappings. * The frequency of the mtime CSR is now visible via hwprobe. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmaj2EYTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiVG3D/9kNHTI09iPDJd6fTChE3cpMxy7xXXE URX3Avu+gYsJmIbYyg4RnQ8FGFN7icKBCrQqs7JmLliU0NU+YMcCcjsJA2QaivbD VAlaex1qNcvNGteHrpbqhr3Zs4zw8GlBkB3KFTLyPAp61bybGo0a/A5ONJ7ScQIW RWHewAPgb86cQ0Q34JpO87TqvMM0KMvhQP5dip+olaFjLRBzhXmGFZfHqA80kTWl 0ytYclVCHZMtO/5mnQpuIOVs1IKw9L4wa0sivOQF0iLTqfKDFALa6yZsThHA/w3e JVuBAdQhcPZ3fgO2fUfJPlW16GmRC2/tdiFg5NFw8k4vo7DYBwX55ztPKXqDrJDM 8ah85IeLiPar/A/uHdn6bPjK+aGMuzklKF50r62XXAc2fL8mza1sdvKCVOy2EOLn JyGI9c/10KpvN/DW8g7hPefhvbx4+tCKkFcPqf++VQha6W8cQdCKi+Li0Pm8TTnp XPQjIvSlDDG1Pl4ofgBSFoyB8pkBXNzvv8NZp+YYtnqSOLAKaZuP+KwA8TwHdvGM pdCXcL3KHiLy4/pJWEoNTutD0mbJ7PUIb2P/KkjqYDgp4F1n0Hg+/aeSIp+7a4Pv yTBctIGxrlriQMIdtWCR8tyhcPP4pDpGYkW0K15EE16G0NK0fjD89LEXYqT6ae2R C0QgiwnVe/eopg== =zeUn -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. - The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. - Support for HAVE_ARCH_STACKLEAK. - The sv39 linear map has been extended to support 128GiB mappings. - The frequency of the mtime CSR is now visible via hwprobe. * tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: Provide the frequency of time CSR via hwprobe riscv: Extend sv39 linear mapping max size to 128G riscv: enable HAVE_ARCH_STACKLEAK riscv: signal: Remove unlikely() from WARN_ON() condition riscv: Improve exception and system call latency RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() RISC-V: ACPI: Enable SPCR table for console output on RISC-V riscv: boot: remove duplicated targets line trace: riscv: Remove deprecated kprobe on ftrace support riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions RISC-V: run savedefconfig for defconfig RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ... |
||
|
Linus Torvalds
|
51c4767503 |
bitmap-6.11-rc1
Random fixes for v6.11. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmahKbIACgkQsUSA/Tof vsh8zQwAvguyeNubDFqdMe3E/Vp1J3WqXsBFzbE1rGLCyI2S0cgJFL5BlW51zY47 70wLt9EmroEobwj1qHSQlzejNp31kSBQ1Sqq25oivfJqEF1elDT5PQxYqBbU1C9Y kVWnxtb+oKaoFd5jiBK8+iTl8dXjT6H2RoV0zpPab/JPcqsjwFfkUvtENt/Kpo5c aRrGTFwshdp5eT4sEZQv57VKroBcwZOvv2//qrklFHrJHl4pjMT8eaX3twcQysoy umTVt+TK6NErLnht+VRQJ2/L02FKi7b+bHePVgNzaT+1FSDMT4FltmZd96Xwbzah hSkwWtqy0N2gaTcqie9nwdEiCJGjF39M7k2wangUS91CeDsbIUSsJgDCESUCm+zK hRqleGOnoeg4+jZBci7M53lKa/pADlmLhnU8iAc3BSKozsaioltkT+hHn8vAkstk h/kHlbfkzasufUWAhduBpIn384gWWEY6RACffgCsOuvbT+ZyDKUJpKYaEwVx+Pri l72j0hs9 =RbET -----END PGP SIGNATURE----- Merge tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux Pull bitmap updates from Yury Norov: "Random fixes" * tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux: riscv: Remove unnecessary int cast in variable_fls() radix tree test suite: put definition of bitmap_clear() into lib/bitmap.c bitops: Add a comment explaining the double underscore macros lib: bitmap: add missing MODULE_DESCRIPTION() macros cpumask: introduce assign_cpu() macro |
||
Palmer Dabbelt
|
52420e483d
|
RISC-V: Provide the frequency of time CSR via hwprobe
The RISC-V architecture makes a real time counter CSR (via RDTIME instruction) available for applications in U-mode but there is no architected mechanism for an application to discover the frequency the counter is running at. Some applications (e.g., DPDK) use the time counter for basic performance analysis as well as fine grained time-keeping. Add support to the hwprobe system call to export the time CSR frequency to code running in U-mode. Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: Evan Green <evan@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Punit Agrawal <punit.agrawal@bytedance.com> Link: https://lore.kernel.org/r/20240702033731.71955-2-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Stuart Menefy
|
5c8405d763
|
riscv: Extend sv39 linear mapping max size to 128G
This harmonizes all virtual addressing modes which can now all map (PGDIR_SIZE * PTRS_PER_PGD) / 4 of physical memory. The RISCV implementation of KASAN requires that the boundary between shallow mappings are aligned on an 8G boundary. In this case we need VMALLOC_START to be 8G aligned. So although we only need to move the start of the linear mapping down by 4GiB to allow 128GiB to be mapped, we actually move it down by 8GiB (creating a 4GiB hole between the linear mapping and KASAN shadow space) to maintain the alignment requirement. Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240630110550.1731929-1-stuart.menefy@codasip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
3aa1a7d013
|
Merge patch series "RISC-V: Select ACPI PPTT drivers"
This series adds support for ACPI PPTT via cacheinfo. * b4-shazam-merge: RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() Link: https://lore.kernel.org/r/20240617131425.7526-1-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
ec1dc56b54
|
Merge patch "Enable SPCR table for console output on RISC-V"
Sia Jee Heng <jeeheng.sia@starfivetech.com> says: The ACPI SPCR code has been used to enable console output for ARM64 and X86. The same code can be reused for RISC-V. Furthermore, SPCR table is mandated for headless system as outlined in the RISC-V BRS Specification, chapter 6. * b4-shazam-merge: RISC-V: ACPI: Enable SPCR table for console output on RISC-V Link: https://lore.kernel.org/r/20240502073751.102093-1-jeeheng.sia@starfivetech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jisheng Zhang
|
b5db73fb18
|
riscv: enable HAVE_ARCH_STACKLEAK
Add support for the stackleak feature. Whenever the kernel returns to user space the kernel stack is filled with a poison value. At the same time, disables the plugin in EFI stub code because EFI stub is out of scope for the protection. Tested on qemu and milkv duo: / # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT [ 38.675575] lkdtm: Performing direct entry STACKLEAK_ERASING [ 38.678448] lkdtm: stackleak stack usage: [ 38.678448] high offset: 288 bytes [ 38.678448] current: 496 bytes [ 38.678448] lowest: 1328 bytes [ 38.678448] tracked: 1328 bytes [ 38.678448] untracked: 448 bytes [ 38.678448] poisoned: 14312 bytes [ 38.678448] low offset: 8 bytes [ 38.689887] lkdtm: OK: the rest of the thread stack is properly erased Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20240623235316.2010-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Zhongqiu Han
|
1d20e5d437
|
riscv: signal: Remove unlikely() from WARN_ON() condition
"WARN_ON(unlikely(x))" is excessive. WARN_ON() already uses unlikely() internally. Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20240620033434.3778156-1-quic_zhonhan@quicinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Anton Blanchard
|
5d5fc33ce5
|
riscv: Improve exception and system call latency
Many CPUs implement return address branch prediction as a stack. The RISCV architecture refers to this as a return address stack (RAS). If this gets corrupted then the CPU will mispredict at least one but potentally many function returns. There are two issues with the current RISCV exception code: - We are using the alternate link stack (x5/t0) for the indirect branch which makes the hardware think this is a function return. This will corrupt the RAS. - We modify the return address of handle_exception to point to ret_from_exception. This will also corrupt the RAS. Testing the null system call latency before and after the patch: Visionfive2 (StarFive JH7110 / U74) baseline: 189.87 ns patched: 176.76 ns Lichee pi 4a (T-Head TH1520 / C910) baseline: 666.58 ns patched: 636.90 ns Just over 7% on the U74 and just over 4% on the C910. Signed-off-by: Anton Blanchard <antonb@tenstorrent.com> Signed-off-by: Cyril Bur <cyrilbur@tenstorrent.com> Tested-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20240607061335.2197383-1-cyrilbur@tenstorrent.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Yunhui Cui
|
66381d3677
|
RISC-V: Select ACPI PPTT drivers
After adding ACPI support to populate_cache_leaves(), RISC-V can build cacheinfo through the ACPI PPTT table, thus enabling the ACPI_PPTT configuration. Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Link: https://lore.kernel.org/r/20240617131425.7526-3-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Yunhui Cui
|
604f32ea69
|
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
Before cacheinfo can be built correctly, we need to initialize level and type. Since RISC-V currently does not have a register group that describes cache-related attributes like ARM64, we cannot obtain them directly, so now we obtain cache leaves from the ACPI PPTT table (acpi_get_cache_info()) and set the cache type through split_levels. Suggested-by: Jeremy Linton <jeremy.linton@arm.com> Suggested-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://lore.kernel.org/r/20240617131425.7526-2-cuiyunhui@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Yunhui Cui
|
ee3fab10cb
|
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
ci_leaf_init() is a declared static function. The implementation of the
function body and the caller do not use the parameter (struct device_node
*node) input parameter, so remove it.
Fixes:
|
||
Sia Jee Heng
|
38738947db
|
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
The ACPI SPCR code has been used to enable console output for ARM64 and X86. The same code can be reused for RISC-V. Furthermore, SPCR table is mandated for headless system as outlined in the RISC-V BRS Specification, chapter 6. Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Link: https://lore.kernel.org/r/20240502073751.102093-2-jeeheng.sia@starfivetech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Jisheng Zhang
|
8d22d0db5b
|
riscv: boot: remove duplicated targets line
The "targets:" is duplicated in another line, remove the one with less targets. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20240613153053.3835-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jinjie Ruan
|
3308172276
|
trace: riscv: Remove deprecated kprobe on ftrace support
Since commit
|
||
|
Linus Torvalds
|
ca83c61cb3 |
Kbuild updates for v6.11
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_KALLSYMS
- Enable the warning for symbol reference to .exit.* sections by default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate base
DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
-----BEGIN PGP SIGNATURE-----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=BYu7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
||
|
Palmer Dabbelt
|
b9a603da42
|
Merge patch series "riscv: Separate vendor extensions from standard extensions"
Charlie Jenkins <charlie@rivosinc.com> says: All extensions, both standard and vendor, live in one struct "riscv_isa_ext". There is currently one vendor extension, xandespmu, but it is likely that more vendor extensions will be added to the kernel in the future. As more vendor extensions (and standard extensions) are added, riscv_isa_ext will become more bloated with a mix of vendor and standard extensions. This also allows each vendor to be conditionally enabled through Kconfig. * b4-shazam-merge: riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-0-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Charlie Jenkins
|
d4c8d79f51
|
riscv: cpufeature: Extract common elements from extension checking
The __riscv_has_extension_likely() and __riscv_has_extension_unlikely() functions from the vendor_extensions.h can be used to simplify the standard extension checking code as well. Migrate those functions to cpufeature.h and reorganize the code in the file to use the functions. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-4-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Charlie Jenkins
|
0f24254111
|
riscv: Introduce vendor variants of extension helpers
Vendor extensions are maintained in per-vendor structs (separate from standard extensions which live in riscv_isa). Create vendor variants for the existing extension helpers to interface with the riscv_isa_vendor bitmaps. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andy Chiu <andy.chiu@sifive.com> Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-3-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Charlie Jenkins
|
9448d9accd
|
riscv: Add vendor extensions to /proc/cpuinfo
All of the supported vendor extensions that have been listed in riscv_isa_vendor_ext_list can be exported through /proc/cpuinfo. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Evan Green <evan@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-2-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Charlie Jenkins
|
23c996fc2b
|
riscv: Extend cpufeature.c to detect vendor extensions
Instead of grouping all vendor extensions into the same riscv_isa_ext that standard instructions use, create a struct "riscv_isa_vendor_ext_data_list" that allows each vendor to maintain their vendor extensions independently of the standard extensions. xandespmu is currently the only vendor extension so that is the only extension that is affected by this change. An additional benefit of this is that the extensions of each vendor can be conditionally enabled. A config RISCV_ISA_VENDOR_EXT_ANDES has been added to allow for that. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andy Chiu <andy.chiu@sifive.com> Tested-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com> Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-1-0af7587bbec0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Conor Dooley
|
82b4616806
|
RISC-V: run savedefconfig for defconfig
It's been a while since this was run, and there's a few things that have changed. Firstly, almost all of the Renesas stuff vanishes because the config for the RZ/Five is gated behind NONPORTABLE. Several options (like CONFIG_PM) are removed as they are the default values. To retain DEFVFREQ_THERMAL and BLK_DEV_THROTTLING, add PM_DEVFREQ and BLK_CGROUP respectively. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240717-shrubs-concise-51600886babf@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Conor Dooley
|
3d8d459c8b
|
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
Currently the entries appear to be in a random order (although according to Palmer he has tried to sort them by key value) which makes it harder to find entries in a growing list, and more likely to have conflicts as all patches are adding to the end of the list. Sort them alphabetically instead. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20240717-dedicate-squeamish-7e4ab54df58f@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
6a4aa4c94b
|
Merge patch series "Add ACPI NUMA support for RISC-V"
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
|
||
Haibo Xu
|
eabd9db64e
|
ACPI: RISCV: Add NUMA support based on SRAT and SLIT
Add acpi_numa.c file to enable parse NUMA information from ACPI SRAT and SLIT tables. SRAT table provide CPUs(Hart) and memory nodes to proximity domain mapping, while SLIT table provide the distance metrics between proximity domains. Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/65dbad1fda08a32922c44886e4581e49b4a2fecc.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
|
Linus Torvalds
|
2c9b351240 |
ARM:
* Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement * Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware * Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol * FPSIMD/SVE support for nested, including merged trap configuration and exception routing * New command-line parameter to control the WFx trap behavior under KVM * Introduce kCFI hardening in the EL2 hypervisor * Fixes + cleanups for handling presence/absence of FEAT_TCRX * Miscellaneous fixes + documentation updates LoongArch: * Add paravirt steal time support. * Add support for KVM_DIRTY_LOG_INITIALLY_SET. * Add perf kvm-stat support for loongarch. RISC-V: * Redirect AMO load/store access fault traps to guest * perf kvm stat support * Use guest files for IMSIC virtualization, when available ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA extensions is coming through the RISC-V tree. s390: * Assortment of tiny fixes which are not time critical x86: * Fixes for Xen emulation. * Add a global struct to consolidate tracking of host values, e.g. EFER * Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. * Print the name of the APICv/AVIC inhibits in the relevant tracepoint. * Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. * Drop MTRR virtualization, and instead always honor guest PAT on CPUs that support self-snoop. * Update to the newfangled Intel CPU FMS infrastructure. * Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored. * Misc cleanups x86 - MMU: * Small cleanups, renames and refactoring extracted from the upcoming Intel TDX support. * Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs. * Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting, to avoid stalling vCPUs when splitting huge pages. * Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state because the callers fully expect a valid SPTE, it's all but dangerous to let more MMU changes happen afterwards. x86 - AMD: * Make per-CPU save_area allocations NUMA-aware. * Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code. * Base support for running SEV-SNP guests. API-wise, this includes a new KVM_X86_SNP_VM type, encrypting/measure the initial image into guest memory, and finalizing it before launching it. Internally, there are some gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges. This includes basic support for attestation guest requests, enough to say that KVM supports the GHCB 2.0 specification. There is no support yet for loading into the firmware those signing keys to be used for attestation requests, and therefore no need yet for the host to provide certificate data for those keys. To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data. x86 - Intel: * Remove an unnecessary EPT TLB flush when enabling hardware. * Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1). * KVM: x86: Suppress MMIO that is triggered during task switch emulation Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation. Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed. See commit |
||
|
Linus Torvalds
|
f557af081d |
RISC-V Patches for the 6.11 Merge Window, Part 1
* Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension.
* Zimop and Zcmop for may-be-operations.
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension.
* Zawrs,
* riscv,cpu-intc is now dtschema.
* A handful of performance improvements and cleanups to text patching.
* Support for memory hot{,un}plug
* The highest user-allocatable virtual address is now visible in
hwprobe.
-----BEGIN PGP SIGNATURE-----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=+ICi
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
|
||
Zhang Bingwu
|
af7925d820 |
kbuild: Abort make on install failures
Setting '-e' flag tells shells to exit with error exit code immediately after any of commands fails, and causes make(1) to regard recipes as failed. Before this, make will still continue to succeed even after the installation failed, for example, for insufficient permission or directory does not exist. Signed-off-by: Zhang Bingwu <xtexchooser@duck.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
aba9753c06 |
TTY/Serial updates for 6.11-rc1
Here is a small set of tty and serial driver updates for 6.11-rc1. Not much happened this cycle, unlike the previous kernel release which had lots of "excitement" in this part of the kernel. Included in here are the following changes: - dt binding updates for new platforms - 8250 driver updates - various small serial driver fixes and updates - printk/console naming and matching attempt #2 (was reverted for 6.10-final, should be good to go this time around, acked by the relevant maintainers). All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppbCQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymV1ACeIY5kgipqY7w4d3/7PcpKMiftrisAn0hr6csj Gan+k3cuVGlasGkaQ5/B =35VK -----END PGP SIGNATURE----- Merge tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.11-rc1. Not much happened this cycle, unlike the previous kernel release which had lots of "excitement" in this part of the kernel. Included in here are the following changes: - dt binding updates for new platforms - 8250 driver updates - various small serial driver fixes and updates - printk/console naming and matching attempt #2 (was reverted for 6.10-final, should be good to go this time around, acked by the relevant maintainers). All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits) Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports serial: core: Add serial_base_match_and_update_preferred_console() printk: Add match_devname_and_update_preferred_console() serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT dt-bindings: serial: sc16is7xx: add reset-gpios dt-bindings: serial: vt8500-uart: convert to json-schema serial: 8250_platform: Explicitly show we initialise ISA ports only once tty: add missing MODULE_DESCRIPTION() macros dt-bindings: serial: mediatek,uart: add MT7988 serial: sh-sci: Add support for RZ/V2H(P) SoC dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names' dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts serial: 8250_dw: Use reset array API to get resets dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC serial: 8250: Extract platform driver serial: 8250: Extract RSA bits serial: imx: stop casting struct uart_port to struct imx_port ... |
||
|
Linus Torvalds
|
70045bfc4c |
ftrace: Rewrite of function graph tracer
Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT 7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8= =umuf -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ... |
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
d80f2996b8 |
asm-generic updates for 6.11
Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVB1cACgkQYKtH/8kJ UicMqxAAnYKOxfjoMIhYYK6bl126wg/vIcDcjIR9cNWH21Nhn3qxn11ZXau3S7xv 3l/HreEhyEQr4gC2a70IlXyHUadYOlrk+83OURrunWk1oKPmZlMKcfPVbtp8GL7x PUNXQfwM1XZLveKwufY24hoZdwKC+Y/5WLc1t0ReznJuAqgeO2rM9W5dnV5bAfCp he3F5hFcr196Dz3/GJjJIWrY+cbwfmZWsNtj1vFTL5/r/LuCu8HTkqhsGj8tE5BJ NGVEEXbp5eaVTCIGqJWhnuZcsnKN9kM51M7CtdwWf8OTckUVuJap5OsDVKQkWkGl bLPbd2jhDltph0sah51hAIvv4WdkThW76u9FRW7KR3fo7ra67eF7l5j7wc1lE2JB GwLJ1X56Bxe1GhvvNTlDmb7DrnlP/DMPuRv3Z6xyH6l8iZ2pMGlnAxuw6Bs1s6Y5 WSs36ZpnS0ctgjfx37ZITsZSvbKFPpQFJP4siwS8aRNv/NFALNNdFyOCY5lNzspZ 0dxwjn6/7UpHE4MKh6/hvCg2QwupXXBTRytibw+75/rOsR+EYlmtuONtyq2sLUHe ktJ5pg+8XuZm27+wLffuluzmY7sv2F8OU4cTYeM60Ynmc6pRzwUY6/VhG52S1/mU Ua4VgYIpzOtlLrYmz5QTWIZpdSFSVbIc/3pLriD6hn4Mvg+BwdA= =XOhL -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl |
||
|
Linus Torvalds
|
a9a4cd9c33 |
soc: defconfig updates for 6.11
These are the usual updates to enable newly added drivers, mostly for arm64 and riscv this time. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVOFUACgkQYKtH/8kJ Uiecqw/+LleDzQp7Gf2DaQUesmLwfqs6xj69GIDI69y1PLPI0bQK/hSQ3B+ZTpZP fF56oxBbevytgf6LzhI/Ma+RLcSWqyNw6wgzkS+pBnslCC/8zc66wU7WF53CL9LL Ovxo0MRKzQdCgXpu1OZFeUM38YT72yKNebjiYE502vHHfm3Q7XmGmPgCgIJqF0rE BSQaSCPLEJU/pFsus+gAILKn+ptgt8GUWDKRSGksJZ8oyuWB30fl+GZ4yg6TaFie /D3gm3Qh9uXviG7w4ks1gTvuOgoTlRAecrzxstPrQvHDaG2WCdmvI68aek7Dj/DH AYb6krExF58VBdTK+HhD9hxxF9nLvk58GVNfTd7FryIejv9Nw0sMWC7SGoYkZShF bSkuX2cxy6S0+ejvJ+HOkmLFAXY2D3ScuVpIEaoE3V+R017Izq5vyYWdvZv2CyMv zv9wZW6oiDMDRyVbnrw2dZ4JQwna3XWf3ffr8Ds6NNJt4e07npPlkmlwsUfZEkMl yQAtUBeeGBDT3GKP2ZyaexHbIwXro6EcICa1hupyLZwR3RSiU7ZsNL98lKW9nTkJ 2ZK5f9vKAat+yFZ+XfZS+khA2qz2gtrykonHYZvXcV7FcM8UmpvlO22gliwRR4VI JOwu+biwM6hnGoJc7WyC5YS2rwcOZZ1JIv6vvUDznOZ3pLKFb7E= =OqPR -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "These are the usual updates to enable newly added drivers, mostly for arm64 and riscv this time" * tag 'soc-defconfig-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: Enable the IWLWIFI driver ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support arm64: defconfig: Enable NVIDIA CoreSight PMU driver arm64: defconfig: enable SHM Bridge support for the TZ memory allocator arm64: defconfig: Enable secure QFPROM driver ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x riscv: defconfig: Enable StarFive JH7110 drivers arm64: defconfig: Enable TI LP873X PMIC arm64: defconfig: Enable USB2 PHY Driver arm64: defconfig: Enable MTD support for Hyperbus ARM: configs: at91: Enable LVDS serializer support arm64: defconfig: enable several Qualcomm interconnects arm64: defconfig: Enable Marvell 88Q2XXX PHY support arm64: defconfig: make CONFIG_INTERCONNECT_QCOM_SM8350 built-in arm64: defconfig: enable CONFIG_SM_GPUCC_8350 arm64: defconfig: Enable Renesas R-Car Gen4 PCIe controller |
||
|
Linus Torvalds
|
e3950967f6 |
soc: dt updates for 6.11
The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to
the MT7981 Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv
boards and eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops
based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip,
the Asus Vivobook S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices
from Samsung, Motorola and LG, as well as a wireless router
and some reference designs
- Six NXP i.MX based machines, mostly industrial boards along
with some reference designs
- Mediatek sees some interesting Filogic based routers
including the "OpenWRT One", a few new Chromebooks as
well as single-board computers.
- Four machines from Solidrun based on Marvell cn913x,
replacing the older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board
computers including some interesting ones based on the
rk3588 chip like the ROCK 5 ITX board and the CM3588
with its four NVMe slots
- The RISC-V boards are all single-board computers based on
Starfive JH7110, Microchip MPFS and Allwinner D1, which all
had similar boards already
There are also a lot of updates to already supported machines,
notably for the TI K3, Rockchips, Freescale and of course
Qualcomm platforms.
-----BEGIN PGP SIGNATURE-----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=xGqj
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
||
Paolo Bonzini
|
86014c1e20 |
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
||
Masahiro Yamada
|
b9d73218d7 |
treewide: change conditional prompt for choices to 'depends on'
While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a
prompt followed by 'if <expr>'. This conditional controls _only_ the
prompt.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. This is reasonable
because you are likely want to enable the block device support. When
EXPERT=y, the prompt is shown, allowing you to toggle BLOCK.
Please note that it is different from 'depends on EXPERT', which would
enable and disable the entire config entry.
However, this conditional prompt has never worked in a choice block.
The following two work in the same way: when EXPERT is disabled, the
choice block is entirely disabled.
[Test Code 1]
choice
prompt "choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Test Code 2]
choice
prompt "choose"
depends on EXPERT
config A
bool "A"
config B
bool "B"
endchoice
I believe the first case should hide only the prompt, producing the
default:
CONFIG_A=y
# CONFIG_B is not set
The next commit will change (fix) the behavior of the conditional prompt
in choice blocks.
I see several choice blocks wrongly using a conditional prompt, where
'depends on' makes more sense.
To preserve the current behavior, this commit converts such misuses.
I did not touch the following entry in arch/x86/Kconfig:
choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G
This is truly the correct use of the conditional prompt; when EXPERT=n,
this choice block should silently select the reasonable VMSPLIT_3G,
although the resulting PAGE_OFFSET will not be affected anyway.
Presumably, the one in fs/jffs2/Kconfig is also correct, but I converted
it to 'depends on' to avoid any potential behavioral change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
||
Qingfang Deng
|
93b63f68d0
|
riscv: lib: relax assembly constraints in hweight
rd and rs don't have to be the same. In some cases where rs needs to be saved for later usage, this will save us some mv instructions. Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn> Reviewed-by: Xiao Wang <xiao.w.wang@intel.com> Link: https://lore.kernel.org/r/20240527092405.134967-1-dqfext@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Christophe Leroy
|
e6c0c03245 |
mm: provide mm_struct and address to huge_ptep_get()
On powerpc 8xx huge_ptep_get() will need to know whether the given ptep is a PTE entry or a PMD entry. This cannot be known with the PMD entry itself because there is no easy way to know it from the content of the entry. So huge_ptep_get() will need to know either the size of the page or get the pmd. In order to be consistent with huge_ptep_get_and_clear(), give mm and address to huge_ptep_get(). Link: https://lkml.kernel.org/r/cc00c70dd384298796a4e1b25d6c4eb306d3af85.1719928057.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
yang.zhang
|
6ad8735994
|
riscv: set trap vector earlier
The exception vector of the booting hart is not set before enabling the mmu and then still points to the value of the previous firmware, typically _start. That makes it hard to debug setup_vm() when bad things happen. So fix that by setting the exception vector earlier. Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: yang.zhang <yang.zhang@hexintek.com> Link: https://lore.kernel.org/r/20240508022445.6131-1-gaoshanliukou@163.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
5ee121a393
|
Merge patch series "riscv: Apply Zawrs when available"
Andrew Jones <ajones@ventanamicro.com> says:
Zawrs provides two instructions (wrs.nto and wrs.sto), where both are
meant to allow the hart to enter a low-power state while waiting on a
store to a memory location. The instructions also both wait an
implementation-defined "short" duration (unless the implementation
terminates the stall for another reason). The difference is that while
wrs.sto will terminate when the duration elapses, wrs.nto, depending on
configuration, will either just keep waiting or an ILL exception will be
raised. Linux will use wrs.nto, so if platforms have an implementation
which falls in the "just keep waiting" category (which is not expected),
then it should _not_ advertise Zawrs in the hardware description.
Like wfi (and with the same {m,h}status bits to configure it), when
wrs.nto is configured to raise exceptions it's expected that the higher
privilege level will see the instruction was a wait instruction, do
something, and then resume execution following the instruction. For
example, KVM does configure exceptions for wfi (hstatus.VTW=1) and
therefore also for wrs.nto. KVM does this for wfi since it's better to
allow other tasks to be scheduled while a VCPU waits for an interrupt.
For waits such as those where wrs.nto/sto would be used, which are
typically locks, it is also a good idea for KVM to be involved, as it
can attempt to schedule the lock holding VCPU.
This series starts with Christoph's addition of the riscv
smp_cond_load_relaxed function which applies wrs.sto when available.
That patch has been reworked to use wrs.nto and to use the same approach
as Arm for the wait loop, since we can't have arbitrary C code between
the load-reserved and the wrs. Then, hwprobe support is added (since the
instructions are also usable from usermode), and finally KVM is
taught about wrs.nto, allowing guests to see and use the Zawrs
extension.
We still don't have test results from hardware, and it's not possible to
prove that using Zawrs is a win when testing on QEMU, not even when
oversubscribing VCPUs to guests. However, it is possible to use KVM
selftests to force a scenario where we can prove Zawrs does its job and
does it well. [4] is a test which does this and, on my machine, without
Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25
seconds.
This series is also available here [1]. In order to use QEMU for testing
a build with [2] is needed. In order to enable guests to use Zawrs with
KVM using kvmtool, the branch at [3] may be used.
[1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/
[2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/
[3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/
[4]
|
||
Andrew Jones
|
86d6a86e59
|
KVM: riscv: Support guest wrs.nto
When a guest traps on wrs.nto, call kvm_vcpu_on_spin() to attempt to yield to the lock holding VCPU. Also extend the KVM ISA extension ONE_REG interface to allow KVM userspace to detect and enable the Zawrs extension for the Guest/VM. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240426100820.14762-13-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Andrew Jones
|
244c18fbf6
|
riscv: hwprobe: export Zawrs ISA extension
Export Zawrs ISA extension through hwprobe. [Palmer: there's a gap in the numbers here as there will be a merge conflict when this is picked up. To avoid confusion I just set the hwprobe ID to match what it would be post-merge.] Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20240426100820.14762-12-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Paolo Bonzini
|
c8b8b8190a |
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support. 2. Add some VM migration enhancement. 3. Add perf kvm-stat support for loongarch. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmaOS6UWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImehejD/9pACGe3h3krXLcFVWXOFIu5Hpc 5kQLP0lSPJ/o5Xs8t/oPLrnDX70z90wXI1LOmltc7h32MSwFa2l8COQh+sN5eJBQ PNyt7u7bMipp0yJS4Gl3LQQ5vklcGOSpQc/gbeXnVx8J/tz+Mo9YGGLIXVRXRM6W Ri8D2VVFiwzQQYeTpPo1u1Ob8C6mA4KOppwvhscMTM3vj4NMbsinBzRnR0lG0Tdw meFhxDPly1Ksxsbnj9UGO6UnEY0A2SLONs6MiO4y4DtoqoDlw/lbqFJuYo4vvbx1 pxtjyirD/PX/wjslQFWUOuU0hMfAodera+JupZ5BZWfcG8FltA4DQfDsm/U9RjK/ 7gGNnr8Xk2/tp6+4AVV+HU2iTgRvq+mXCL72zSy2Y4r7ElBAANDfk4n+Zn/PWisn U9wwV8Ue7tVB15BRpRsg77NzBidiCFEe/6flWYiX2y24ke71gwDJBGUy8hMdKt6t 4Cq8atsU0MvDAzfYMsK9JjskJp4UFq6wb1tXbbuADM4TDhnzlK6s6h3vM+pFlh/f my7fDH8/2qsCWhBDM4pmsJskVp+I1GOk/80RjTQISwx7iHktJWvxNYTaisK2fvD5 Qs1IUWfNFbDX0Lr0QpN6j6X4rZkghR4R6XoFkd4nkicwi+UHVn3oK9GSqv24QJn9 7+Ev3dfRTUYLd6mC4Q== =DpIK -----END PGP SIGNATURE----- Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.11 1. Add ParaVirt steal time support. 2. Add some VM migration enhancement. 3. Add perf kvm-stat support for loongarch. |
||
|
Paolo Bonzini
|
60d2b2f3c4 |
KVM/riscv changes for 6.11
- Redirect AMO load/store access fault traps to guest - Perf kvm stat support for RISC-V - Use HW IMSIC guest files when available -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmaRDW4ACgkQrUjsVaLH LAcU2Q/+IaL17M8D8ueOcbmCMqZRReyVdR9vH6q87E9NJYRH2dewZ656bNQnnU20 3hkbHOnF+NJAHJ0SfXwqNTVkJcQ8u+F3Xui4DlnFZ/lkpcWpvT/DRI5SCjIjiB/G SS/xWaRoSjvVJ7M8SyQhHUb2Y/tiDRXOOEl59ROGAKjzC3SY5/NJJ6g5FeE5akT8 /Q7WisZmc+ZH+a9EEOnl+Do7AFakrlaFM5KnweamfqSlSFrQB12YNpSsmA16k6X9 fqK/xPQTjeNakdQDPKw8INCbXkt8dsnlrPS6ivL0FCVf38aIJK0jxyLk9JbZGBK8 +dGCJOLVJontEyOVTYheq2oWv40xAlkXDjLNbnz+Nf7Sau8evFBpE2mPnbUBoGZi fu5UCddSw3CFwrFNM+qiBRPz/mNuUpCC4pCh8yJSCDZ374ew9ili2l3Nb2IvBcJ2 36lQuxlPVTPOv1J76/WtYwsSwaYBHHcBshweTJCkAkezp0d/wAE8bpaw3n4YnfSn l4u8/rrnEBb3Cd9cbW1Vk77Vw5e02RlZY5T+JLj7TXWSAFzstYxMpLsf097tqqcn vY1iTrpxTcJuY0Rra3SI05eKgliXI5snh08xlW2NiVxu8NjjZMU73b6tg3JX8FHl DMCafyQUBueV2jCpwbYribpbWv/UuUl92AKyJOwZ76W/e9YVBLA= =atJQ -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.11-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.11 - Redirect AMO load/store access fault traps to guest - Perf kvm stat support for RISC-V - Use guest files for IMSIC virtualization, when available ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA extensions is coming through the RISC-V tree. |
||
Christoph Müllner
|
b8ddb0df30
|
riscv: Add Zawrs support for spinlocks
RISC-V code uses the generic ticket lock implementation, which calls the macros smp_cond_load_relaxed() and smp_cond_load_acquire(). Introduce a RISC-V specific implementation of smp_cond_load_relaxed() which applies WRS.NTO of the Zawrs extension in order to reduce power consumption while waiting and allows hypervisors to enable guests to trap while waiting. smp_cond_load_acquire() doesn't need a RISC-V specific implementation as the generic implementation is based on smp_cond_load_relaxed() and smp_acquire__after_ctrl_dep() sufficiently provides the acquire semantics. This implementation is heavily based on Arm's approach which is the approach Andrea Parri also suggested. The Zawrs specification can be found here: https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu> Co-developed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240426100820.14762-11-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Andrew Jones
|
6da111574b
|
riscv: Provide a definition for 'pause'
If we're going to provide the encoding for 'pause' in cpu_relax() anyway, then we can drop the toolchain checks and just always use it. The advantage of doing this is that other code that need pause don't need to also define it (yes, another use is coming). Add the definition to insn-def.h since it's an instruction definition and also because insn-def.h doesn't include much, so it's safe to include from asm/vdso/processor.h without concern for circular dependencies. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240426100820.14762-9-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Jakub Kicinski
|
7c8267275d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/act_ct.c |
||
Clément Léger
|
c9b8cd139c
|
riscv: hwprobe: export highest virtual userspace address
Some userspace applications (OpenJDK for instance) uses the free MSBs in pointers to insert additional information for their own logic and need to get this information from somewhere. Currently they rely on parsing /proc/cpuinfo "mmu=svxx" string to obtain the current value of virtual address usable bits [1]. Since this reflect the raw supported MMU mode, it might differ from the logical one used internally which is why arch_get_mmap_end() is used. Exporting the highest mmapable address through hwprobe will allow a more stable interface to be used. For that purpose, add a new hwprobe key named RISCV_HWPROBE_KEY_HIGHEST_VIRT_ADDRESS which will export the highest userspace virtual address. Link: https://github.com/openjdk/jdk/blob/master/src/hotspot/os_cpu/linux_riscv/vm_version_linux_riscv.cpp#L171 [1] Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20240410144558.1104006-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |