Commit Graph

1736 Commits

Author SHA1 Message Date
Marc Zyngier
58466766cd arm/arm64: KVM: Add ARM_EXCEPTION_IS_TRAP macro
32 and 64bit use different symbols to identify the traps.
32bit has a fine grained approach (prefetch abort, data abort and HVC),
while 64bit is pretty happy with just "trap".

This has been fine so far, except that we now need to decode some
of that in tracepoints that are common to both architectures.

Introduce ARM_EXCEPTION_IS_TRAP which abstracts the trap symbols
and make the tracepoint use it.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:53 +00:00
Christoffer Dall
6794ad5443 KVM: arm/arm64: Fix unintended stage 2 PMD mappings
There are two things we need to take care of when we create block
mappings in the stage 2 page tables:

  (1) The alignment within a PMD between the host address range and the
  guest IPA range must be the same, since otherwise we end up mapping
  pages with the wrong offset.

  (2) The head and tail of a memory slot may not cover a full block
  size, and we have to take care to not map those with block
  descriptors, since we could expose memory to the guest that the host
  did not intend to expose.

So far, we have been taking care of (1), but not (2), and our commentary
describing (1) was somewhat confusing.

This commit attempts to factor out the checks of both into a common
function, and if we don't pass the check, we won't attempt any PMD
mappings for neither hugetlbfs nor THP.

Note that we used to only check the alignment for THP, not for
hugetlbfs, but as far as I can tell the check needs to be applied to
both scenarios.

Cc: Ralph Palutke <ralph.palutke@fau.de>
Cc: Lukas Braun <koomi@moshbit.net>
Reported-by: Lukas Braun <koomi@moshbit.net>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:52 +00:00
Marc Zyngier
107352a249 arm/arm64: KVM: vgic: Force VM halt when changing the active state of GICv3 PPIs/SGIs
We currently only halt the guest when a vCPU messes with the active
state of an SPI. This is perfectly fine for GICv2, but isn't enough
for GICv3, where all vCPUs can access the state of any other vCPU.

Let's broaden the condition to include any GICv3 interrupt that
has an active state (i.e. all but LPIs).

Cc: stable@vger.kernel.org
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:08 +00:00
Christoffer Dall
6e14ef1d12 KVM: arm/arm64: arch_timer: Simplify kvm_timer_vcpu_terminate
kvm_timer_vcpu_terminate can only be called in two scenarios:

 1. As part of cleanup during a failed VCPU create
 2. As part of freeing the whole VM (struct kvm refcount == 0)

In the first case, we cannot have programmed any timers or mapped any
IRQs, and therefore we do not have to cancel anything or unmap anything.

In the second case, the VCPU will have gone through kvm_timer_vcpu_put,
which will have canceled the emulated physical timer's hrtimer, and we
do not need to that here as well.  We also do not care if the irq is
recorded as mapped or not in the VGIC data structure, because the whole
VM is going away.  That leaves us only with having to ensure that we
cancel the bg_timer if we were blocking the last time we called
kvm_timer_vcpu_put().

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:07 +00:00
Christoffer Dall
8a411b060f KVM: arm/arm64: Remove arch timer workqueue
The use of a work queue in the hrtimer expire function for the bg_timer
is a leftover from the time when we would inject interrupts when the
bg_timer expired.

Since we are no longer doing that, we can instead call
kvm_vcpu_wake_up() directly from the hrtimer function and remove all
workqueue functionality from the arch timer code.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:07 +00:00
Christoffer Dall
71a7e47f39 KVM: arm/arm64: Fixup the kvm_exit tracepoint
The kvm_exit tracepoint strangely always reported exits as being IRQs.
This seems to be because either the __print_symbolic or the tracepoint
macros use a variable named idx.

Take this chance to update the fields in the tracepoint to reflect the
concepts in the arm64 architecture that we pass to the tracepoint and
move the exception type table to the same location and header files as
the exits code.

We also clear out the exception code to 0 for IRQ exits (which
translates to UNKNOWN in text) to make it slighyly less confusing to
parse the trace output.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:06 +00:00
Christoffer Dall
9009782a49 KVM: arm/arm64: vgic: Consider priority and active state for pending irq
When checking if there are any pending IRQs for the VM, consider the
active state and priority of the IRQs as well.

Otherwise we could be continuously scheduling a guest hypervisor without
it seeing an IRQ.

Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:47:06 +00:00
Gustavo A. R. Silva
c23b2e6fc4 KVM: arm/arm64: vgic: Fix off-by-one bug in vgic_get_irq()
When using the nospec API, it should be taken into account that:

"...if the CPU speculates past the bounds check then
 * array_index_nospec() will clamp the index within the range of [0,
 * size)."

The above is part of the header for macro array_index_nospec() in
linux/nospec.h

Now, in this particular case, if intid evaluates to exactly VGIC_MAX_SPI
or to exaclty VGIC_MAX_PRIVATE, the array_index_nospec() macro ends up
returning VGIC_MAX_SPI - 1 or VGIC_MAX_PRIVATE - 1 respectively, instead
of VGIC_MAX_SPI or VGIC_MAX_PRIVATE, which, based on the original logic:

	/* SGIs and PPIs */
	if (intid <= VGIC_MAX_PRIVATE)
 		return &vcpu->arch.vgic_cpu.private_irqs[intid];

 	/* SPIs */
	if (intid <= VGIC_MAX_SPI)
 		return &kvm->arch.vgic.spis[intid - VGIC_NR_PRIVATE_IRQS];

are valid values for intid.

Fix this by calling array_index_nospec() macro with VGIC_MAX_PRIVATE + 1
and VGIC_MAX_SPI + 1 as arguments for its parameter size.

Fixes: 41b87599c7 ("KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
[dropped the SPI part which was fixed separately]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-19 17:46:07 +00:00
Marc Zyngier
bea2ef803a KVM: arm/arm64: vgic: Cap SPIs to the VM-defined maximum
SPIs should be checked against the VMs specific configuration, and
not the architectural maximum.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:50 +00:00
Christoffer Dall
6992195cc6 KVM: arm64: Clarify explanation of STAGE2_PGTABLE_LEVELS
In attempting to re-construct the logic for our stage 2 page table
layout I found the reasoning in the comment explaining how we calculate
the number of levels used for stage 2 page tables a bit backwards.

This commit attempts to clarify the comment, to make it slightly easier
to read without having the Arm ARM open on the right page.

While we're at it, fixup a typo in a comment that was recently changed.

Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:50 +00:00
Julien Thierry
2e2f6c3c0b KVM: arm/arm64: vgic: Do not cond_resched_lock() with IRQs disabled
To change the active state of an MMIO, halt is requested for all vcpus of
the affected guest before modifying the IRQ state. This is done by calling
cond_resched_lock() in vgic_mmio_change_active(). However interrupts are
disabled at this point and we cannot reschedule a vcpu.

We actually don't need any of this, as kvm_arm_halt_guest ensures that
all the other vcpus are out of the guest. Let's just drop that useless
code.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:49 +00:00
Punit Agrawal
b8e0ba7c8b KVM: arm64: Add support for creating PUD hugepages at stage 2
KVM only supports PMD hugepages at stage 2. Now that the various page
handling routines are updated, extend the stage 2 fault handling to
map in PUD hugepages.

Addition of PUD hugepage support enables additional page sizes (e.g.,
1G with 4K granule) which can be useful on cores that support mapping
larger block sizes in the TLB entries.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replace BUG() => WARN_ON(1) for arm32 PUD helpers ]
Signed-off-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:49 +00:00
Punit Agrawal
35a6396619 KVM: arm64: Update age handlers to support PUD hugepages
In preparation for creating larger hugepages at Stage 2, add support
to the age handling notifiers for PUD hugepages when encountered.

Provide trivial helpers for arm32 to allow sharing code.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) for arm32 PUD helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:48 +00:00
Punit Agrawal
eb3f0624ea KVM: arm64: Support handling access faults for PUD hugepages
In preparation for creating larger hugepages at Stage 2, extend the
access fault handling at Stage 2 to support PUD hugepages when
encountered.

Provide trivial helpers for arm32 to allow sharing of code.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) in PUD helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:48 +00:00
Punit Agrawal
86d1c55ea6 KVM: arm64: Support PUD hugepage in stage2_is_exec()
In preparation for creating PUD hugepages at stage 2, add support for
detecting execute permissions on PUD page table entries. Faults due to
lack of execute permissions on page table entries is used to perform
i-cache invalidation on first execute.

Provide trivial implementations of arm32 helpers to allow sharing of
code.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON(1) in arm32 PUD helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:48 +00:00
Punit Agrawal
4ea5af5311 KVM: arm64: Support dirty page tracking for PUD hugepages
In preparation for creating PUD hugepages at stage 2, add support for
write protecting PUD hugepages when they are encountered. Write
protecting guest tables is used to track dirty pages when migrating
VMs.

Also, provide trivial implementations of required kvm_s2pud_* helpers
to allow sharing of code with arm32.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ Replaced BUG() => WARN_ON() in arm32 pud helpers ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:47 +00:00
Punit Agrawal
f8df73388e KVM: arm/arm64: Introduce helpers to manipulate page table entries
Introduce helpers to abstract architectural handling of the conversion
of pfn to page table entries and marking a PMD page table entry as a
block entry.

The helpers are introduced in preparation for supporting PUD hugepages
at stage 2 - which are supported on arm64 but do not exist on arm.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:47 +00:00
Punit Agrawal
6396b852e4 KVM: arm/arm64: Re-factor setting the Stage 2 entry to exec on fault
Stage 2 fault handler marks a page as executable if it is handling an
execution fault or if it was a permission fault in which case the
executable bit needs to be preserved.

The logic to decide if the page should be marked executable is
duplicated for PMD and PTE entries. To avoid creating another copy
when support for PUD hugepages is introduced refactor the code to
share the checks needed to mark a page table entry as executable.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:47 +00:00
Punit Agrawal
3f58bf6345 KVM: arm/arm64: Share common code in user_mem_abort()
The code for operations such as marking the pfn as dirty, and
dcache/icache maintenance during stage 2 fault handling is duplicated
between normal pages and PMD hugepages.

Instead of creating another copy of the operations when we introduce
PUD hugepages, let's share them across the different pagesizes.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:46 +00:00
Christoffer Dall
60c3ab30d8 KVM: arm/arm64: vgic-v2: Set active_source to 0 when restoring state
When restoring the active state from userspace, we don't know which CPU
was the source for the active state, and this is not architecturally
exposed in any of the register state.

Set the active_source to 0 in this case.  In the future, we can expand
on this and exposse the information as additional information to
userspace for GICv2 if anyone cares.

Cc: stable@vger.kernel.org
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:46 +00:00
Christoffer Dall
fb544d1ca6 KVM: arm/arm64: Fix VMID alloc race by reverting to lock-less
We recently addressed a VMID generation race by introducing a read/write
lock around accesses and updates to the vmid generation values.

However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but
does so without taking the read lock.

As far as I can tell, this can lead to the same kind of race:

  VM 0, VCPU 0			VM 0, VCPU 1
  ------------			------------
  update_vttbr (vmid 254)
  				update_vttbr (vmid 1) // roll over
				read_lock(kvm_vmid_lock);
				force_vm_exit()
  local_irq_disable
  need_new_vmid_gen == false //because vmid gen matches

  enter_guest (vmid 254)
  				kvm_arch.vttbr = <PGD>:<VMID 1>
				read_unlock(kvm_vmid_lock);

  				enter_guest (vmid 1)

Which results in running two VCPUs in the same VM with different VMIDs
and (even worse) other VCPUs from other VMs could now allocate clashing
VMID 254 from the new generation as long as VCPU 0 is not exiting.

Attempt to solve this by making sure vttbr is updated before another CPU
can observe the updated VMID generation.

Cc: stable@vger.kernel.org
Fixes: f0cf47d939 "KVM: arm/arm64: Close VMID generation race"
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 15:14:45 +00:00
Mark Rutland
bd7d95cafb arm64: KVM: Consistently advance singlestep when emulating instructions
When we emulate a guest instruction, we don't advance the hardware
singlestep state machine, and thus the guest will receive a software
step exception after a next instruction which is not emulated by the
host.

We bodge around this in an ad-hoc fashion. Sometimes we explicitly check
whether userspace requested a single step, and fake a debug exception
from within the kernel. Other times, we advance the HW singlestep state
rely on the HW to generate the exception for us. Thus, the observed step
behaviour differs for host and guest.

Let's make this simpler and consistent by always advancing the HW
singlestep state machine when we skip an instruction. Thus we can rely
on the hardware to generate the singlestep exception for us, and never
need to explicitly check for an active-pending step, nor do we need to
fake a debug exception from the guest.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 14:11:37 +00:00
Mark Rutland
0d640732db arm64: KVM: Skip MMIO insn after emulation
When we emulate an MMIO instruction, we advance the CPU state within
decode_hsr(), before emulating the instruction effects.

Having this logic in decode_hsr() is opaque, and advancing the state
before emulation is problematic. It gets in the way of applying
consistent single-step logic, and it prevents us from being able to fail
an MMIO instruction with a synchronous exception.

Clean this up by only advancing the CPU state *after* the effects of the
instruction are emulated.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 14:10:36 +00:00
Michal Hocko
4e15a073a1 Revert "mm, mmu_notifier: annotate mmu notifiers with blockable invalidate callbacks"
Revert 5ff7091f5a ("mm, mmu_notifier: annotate mmu notifiers with
blockable invalidate callbacks").

MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no
longer needed since 93065ac753 ("mm, oom: distinguish blockable mode for
mmu notifiers").  We now have a full support for per range !blocking
behavior so we can drop the stop gap workaround which the per notifier
flag was used for.

Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:25:19 -07:00
Linus Torvalds
0d1e8b8d2b KVM updates for v4.20
ARM:
  - Improved guest IPA space support (32 to 52 bits)
 
  - RAS event delivery for 32bit
 
  - PMU fixes
 
  - Guest entry hardening
 
  - Various cleanups
 
  - Port of dirty_log_test selftest
 
 PPC:
  - Nested HV KVM support for radix guests on POWER9.  The performance is
    much better than with PR KVM.  Migration and arbitrary level of
    nesting is supported.
 
  - Disable nested HV-KVM on early POWER9 chips that need a particular hardware
    bug workaround
 
  - One VM per core mode to prevent potential data leaks
 
  - PCI pass-through optimization
 
  - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
 
 s390:
  - Initial version of AP crypto virtualization via vfio-mdev
 
  - Improvement for vfio-ap
 
  - Set the host program identifier
 
  - Optimize page table locking
 
 x86:
  - Enable nested virtualization by default
 
  - Implement Hyper-V IPI hypercalls
 
  - Improve #PF and #DB handling
 
  - Allow guests to use Enlightened VMCS
 
  - Add migration selftests for VMCS and Enlightened VMCS
 
  - Allow coalesced PIO accesses
 
  - Add an option to perform nested VMCS host state consistency check
    through hardware
 
  - Automatic tuning of lapic_timer_advance_ns
 
  - Many fixes, minor improvements, and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
 3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
 BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
 XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
 teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
 ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
 =yEPW
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "ARM:
   - Improved guest IPA space support (32 to 52 bits)

   - RAS event delivery for 32bit

   - PMU fixes

   - Guest entry hardening

   - Various cleanups

   - Port of dirty_log_test selftest

  PPC:
   - Nested HV KVM support for radix guests on POWER9. The performance
     is much better than with PR KVM. Migration and arbitrary level of
     nesting is supported.

   - Disable nested HV-KVM on early POWER9 chips that need a particular
     hardware bug workaround

   - One VM per core mode to prevent potential data leaks

   - PCI pass-through optimization

   - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base

  s390:
   - Initial version of AP crypto virtualization via vfio-mdev

   - Improvement for vfio-ap

   - Set the host program identifier

   - Optimize page table locking

  x86:
   - Enable nested virtualization by default

   - Implement Hyper-V IPI hypercalls

   - Improve #PF and #DB handling

   - Allow guests to use Enlightened VMCS

   - Add migration selftests for VMCS and Enlightened VMCS

   - Allow coalesced PIO accesses

   - Add an option to perform nested VMCS host state consistency check
     through hardware

   - Automatic tuning of lapic_timer_advance_ns

   - Many fixes, minor improvements, and cleanups"

* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
  Revert "kvm: x86: optimize dr6 restore"
  KVM: PPC: Optimize clearing TCEs for sparse tables
  x86/kvm/nVMX: tweak shadow fields
  selftests/kvm: add missing executables to .gitignore
  KVM: arm64: Safety check PSTATE when entering guest and handle IL
  KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
  arm/arm64: KVM: Enable 32 bits kvm vcpu events support
  arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
  KVM: arm64: Fix caching of host MDCR_EL2 value
  KVM: VMX: enable nested virtualization by default
  KVM/x86: Use 32bit xor to clear registers in svm.c
  kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
  kvm: vmx: Defer setting of DR6 until #DB delivery
  kvm: x86: Defer setting of CR2 until #PF delivery
  kvm: x86: Add payload operands to kvm_multiple_exception
  kvm: x86: Add exception payload fields to kvm_vcpu_events
  kvm: x86: Add has_payload and payload to kvm_queued_exception
  KVM: Documentation: Fix omission in struct kvm_vcpu_events
  KVM: selftests: add Enlightened VMCS test
  ...
2018-10-25 17:57:35 -07:00
Linus Torvalds
ba9f6f8954 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "I have been slowly sorting out siginfo and this is the culmination of
  that work.

  The primary result is in several ways the signal infrastructure has
  been made less error prone. The code has been updated so that manually
  specifying SEND_SIG_FORCED is never necessary. The conversion to the
  new siginfo sending functions is now complete, which makes it
  difficult to send a signal without filling in the proper siginfo
  fields.

  At the tail end of the patchset comes the optimization of decreasing
  the size of struct siginfo in the kernel from 128 bytes to about 48
  bytes on 64bit. The fundamental observation that enables this is by
  definition none of the known ways to use struct siginfo uses the extra
  bytes.

  This comes at the cost of a small user space observable difference.
  For the rare case of siginfo being injected into the kernel only what
  can be copied into kernel_siginfo is delivered to the destination, the
  rest of the bytes are set to 0. For cases where the signal and the
  si_code are known this is safe, because we know those bytes are not
  used. For cases where the signal and si_code combination is unknown
  the bits that won't fit into struct kernel_siginfo are tested to
  verify they are zero, and the send fails if they are not.

  I made an extensive search through userspace code and I could not find
  anything that would break because of the above change. If it turns out
  I did break something it will take just the revert of a single change
  to restore kernel_siginfo to the same size as userspace siginfo.

  Testing did reveal dependencies on preferring the signo passed to
  sigqueueinfo over si->signo, so bit the bullet and added the
  complexity necessary to handle that case.

  Testing also revealed bad things can happen if a negative signal
  number is passed into the system calls. Something no sane application
  will do but something a malicious program or a fuzzer might do. So I
  have fixed the code that performs the bounds checks to ensure negative
  signal numbers are handled"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
  signal: Guard against negative signal numbers in copy_siginfo_from_user32
  signal: Guard against negative signal numbers in copy_siginfo_from_user
  signal: In sigqueueinfo prefer sig not si_signo
  signal: Use a smaller struct siginfo in the kernel
  signal: Distinguish between kernel_siginfo and siginfo
  signal: Introduce copy_siginfo_from_user and use it's return value
  signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
  signal: Fail sigqueueinfo if si_signo != sig
  signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
  signal/unicore32: Use force_sig_fault where appropriate
  signal/unicore32: Generate siginfo in ucs32_notify_die
  signal/unicore32: Use send_sig_fault where appropriate
  signal/arc: Use force_sig_fault where appropriate
  signal/arc: Push siginfo generation into unhandled_exception
  signal/ia64: Use force_sig_fault where appropriate
  signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
  signal/ia64: Use the generic force_sigsegv in setup_frame
  signal/arm/kvm: Use send_sig_mceerr
  signal/arm: Use send_sig_fault where appropriate
  signal/arm: Use force_sig_fault where appropriate
  ...
2018-10-24 11:22:39 +01:00
Linus Torvalds
5289851171 arm64 updates for 4.20:
- Core mmu_gather changes which allow tracking the levels of page-table
   being cleared together with the arm64 low-level flushing routines
 
 - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to
   mitigate Spectre-v4 dynamically without trapping to EL3 firmware
 
 - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack
 
 - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4
 
 - Support for Common Not Private (CnP) translations allowing threads of
   the same CPU to share the TLB entries
 
 - Accelerated crc32 routines
 
 - Move swapper_pg_dir to the rodata section
 
 - Trap WFI instruction executed in user space
 
 - ARM erratum 1188874 workaround (arch_timer)
 
 - Miscellaneous fixes and clean-ups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlvKGdEACgkQa9axLQDI
 XvGSQBAAiOH6aQABL4TB7c5KIc7C+Unjm6QCFCoaeGWoHuemnM6cFJ7RQsi0GqnP
 dVEX5V/FKfmeTWO5g24Ah+MbTm3Bt6+81gywAmi1rrHhmCaCIPjT7xDqy/WsLlvt
 7WtgegSGvQ7DIMj2dbfFav6+ra67qAiYZTc46jvuynVl6DrE3BCiyTDbXAWt2nzP
 Xf3un4AHRbg3UEMUZTLqU5q4z0tbM6rEAZru8O0UOTnD2q7uttUqW3Ab7fpuEkkj
 lEVrMWD3h8SJg+Df9CbXmCNOjh4VhwBwDb5LgO8vA/AcyV/YLEF5b2OUAk/28qwo
 0GBwjqRyI4+YQ9LPg41MhGzrlnta0HCdYoeNLgLQZiDcUkuSfGhoA+MNZNOR8B08
 sCWF7F6f8UIQm8KMMBiYYdlVyUYgHLsWE/1+CyeLV0oIoWT5k3c+Xe3pho9KpVb0
 Co04TqMlqalry0sbevHz5c55H7iWIjB1Tpo3SxM105dVJVibXRPXkz+WZ5iPO+xa
 ex2j1kjNdA/AUzrSCZ5lh22zhg0WsfwD++E5meAaJMxieim8FeZDRga43rowJ0BA
 zMbSNB/+NDFZ9EhC40VaUfKk8Tkgiug9J5swv0+v7hy1QLDyydHhbOecTuIueauM
 6taiT2Iuov5yFng1eonYj4htvouVF4WOhPGthFPJMOcrB9mLMhs=
 =3Mc8
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Apart from some new arm64 features and clean-ups, this also contains
  the core mmu_gather changes for tracking the levels of the page table
  being cleared and a minor update to the generic
  compat_sys_sigaltstack() introducing COMPAT_SIGMINSKSZ.

  Summary:

   - Core mmu_gather changes which allow tracking the levels of
     page-table being cleared together with the arm64 low-level flushing
     routines

   - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to
     mitigate Spectre-v4 dynamically without trapping to EL3 firmware

   - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack

   - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4

   - Support for Common Not Private (CnP) translations allowing threads
     of the same CPU to share the TLB entries

   - Accelerated crc32 routines

   - Move swapper_pg_dir to the rodata section

   - Trap WFI instruction executed in user space

   - ARM erratum 1188874 workaround (arch_timer)

   - Miscellaneous fixes and clean-ups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
  arm64: KVM: Guests can skip __install_bp_hardening_cb()s HYP work
  arm64: cpufeature: Trap CTR_EL0 access only where it is necessary
  arm64: cpufeature: Fix handling of CTR_EL0.IDC field
  arm64: cpufeature: ctr: Fix cpu capability check for late CPUs
  Documentation/arm64: HugeTLB page implementation
  arm64: mm: Use __pa_symbol() for set_swapper_pgd()
  arm64: Add silicon-errata.txt entry for ARM erratum 1188873
  Revert "arm64: uaccess: implement unsafe accessors"
  arm64: mm: Drop the unused cpu parameter
  MAINTAINERS: fix bad sdei paths
  arm64: mm: Use #ifdef for the __PAGETABLE_P?D_FOLDED defines
  arm64: Fix typo in a comment in arch/arm64/mm/kasan_init.c
  arm64: xen: Use existing helper to check interrupt status
  arm64: Use daifflag_restore after bp_hardening
  arm64: daifflags: Use irqflags functions for daifflags
  arm64: arch_timer: avoid unused function warning
  arm64: Trap WFI executed in userspace
  arm64: docs: Document SSBS HWCAP
  arm64: docs: Fix typos in ELF hwcaps
  arm64/kprobes: remove an extra semicolon in arch_prepare_kprobe
  ...
2018-10-22 17:30:06 +01:00
Paolo Bonzini
e42b4a507e KVM/arm updates for 4.20
- Improved guest IPA space support (32 to 52 bits)
 - RAS event delivery for 32bit
 - PMU fixes
 - Guest entry hardening
 - Various cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlvJ0HIVHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDnWsP/02W6iIZUlg0SfsNq3bownJv+3VH
 BwEWTfRhWqqzSnsPwUEcOakKI8OIDJ07wIr6XoqPqq2PESS4BQv90qUTxytJXIt4
 gdTxZbNdCSzOc8Zf5URi1WtydekxsEFKgZy9iYWuILJzGW8iFbDZasgG6l8TWupN
 SsoyoGYBVwqR4xRf2f+PLf2n4U0McM8gFuKBFpnp1vCg6gZMBOvvKxQSRk9lUXEL
 C5LERL1CsGVn1Q2GxEB4yAxqrlAMMjy/S2dAf2KpCvMvviK3t05C4vY/+/mT21YE
 wCStX7W5Jfhy3hEsyHCkeulODdomIyro32/hw1qLhMXv4+wRvoiNrMVEoxUPi+by
 L89C6slwxqZOgcF2epSQgf7LBiLw+LnCGtACq2xY7p8yGuy0XW7mK9DlY5RvBHka
 aMmZ6kK/GIZFqRHDHa+ND2cAqS+Xyg2t/j2rvUPL0/xNelI1hpUUyGECTcqAXLr7
 N28+8aoHWcYb03r8YwfgWkEcwT9leAS45NBmHgnkOL4srcyW7anSW4NhZb/+U0mM
 8cLF+2BxfUo733Q5EyM2Q3JdbgaDaeanf6zzy7xAsPEywK4P5/kdqjc0N9se+LUx
 WhU3BRDU4KwV6S7bBS9ZuFK3heuwfuKWaYwwDaxrTlem++8FhoLBNV2vN8VjemD/
 AY5RvHrEhFYndijj
 =vjLz
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm updates for 4.20

- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
2018-10-19 15:24:24 +02:00
Dongjiu Geng
58bf437ff6 arm/arm64: KVM: Enable 32 bits kvm vcpu events support
The commit 539aee0edb ("KVM: arm64: Share the parts of
get/set events useful to 32bit") shares the get/set events
helper for arm64 and arm32, but forgot to share the cap
extension code.

User space will check whether KVM supports vcpu events by
checking the KVM_CAP_VCPU_EVENTS extension

Acked-by: James Morse <james.morse@arm.com>
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-18 10:14:03 +01:00
Dongjiu Geng
375bdd3b5d arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
Rename kvm_arch_dev_ioctl_check_extension() to
kvm_arch_vm_ioctl_check_extension(), because it does
not have any relationship with device.

Renaming this function can make code readable.

Cc: James Morse <james.morse@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-18 10:12:53 +01:00
Mark Rutland
da5a3ce66b KVM: arm64: Fix caching of host MDCR_EL2 value
At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.

Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.

Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.

Cc: Christopher Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 1e947bad0b ("arm64: KVM: Skip HYP setup when already running in HYP")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-17 18:32:46 +01:00
Wei Yang
970c0d4b94 KVM: refine the comment of function gfn_to_hva_memslot_prot()
The original comment is little hard to understand.

No functional change, just amend the comment a little.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-17 00:30:13 +02:00
Peng Hao
0804c849f1 kvm/x86 : add coalesced pio support
Coalesced pio is based on coalesced mmio and can be used for some port
like rtc port, pci-host config port and so on.

Specially in case of rtc as coalesced pio, some versions of windows guest
access rtc frequently because of rtc as system tick. guest access rtc like
this: write register index to 0x70, then write or read data from 0x71.
writing 0x70 port is just as index and do nothing else. So we can use
coalesced pio to handle this scene to reduce VM-EXIT time.

When starting and closing a virtual machine, it will access pci-host config
port frequently. So setting these port as coalesced pio can reduce startup
and shutdown time.

without my patch, get the vm-exit time of accessing rtc 0x70 and piix 0xcf8
using perf tools: (guest OS : windows 7 64bit)
IO Port Access  Samples Samples%  Time%  Min Time  Max Time  Avg time
0x70:POUT        86     30.99%    74.59%   9us      29us    10.75us (+- 3.41%)
0xcf8:POUT     1119     2.60%     2.12%   2.79us    56.83us 3.41us (+- 2.23%)

with my patch
IO Port Access  Samples Samples%  Time%   Min Time  Max Time   Avg time
0x70:POUT       106    32.02%    29.47%    0us      10us     1.57us (+- 7.38%)
0xcf8:POUT      1065    1.67%     0.28%   0.41us    65.44us   0.66us (+- 10.55%)

Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-17 00:30:11 +02:00
Wei Yang
31fc4f95dd KVM: leverage change to adjust slots->used_slots in update_memslots()
update_memslots() is only called by __kvm_set_memory_region(), in which
"change" is calculated and indicates how to adjust slots->used_slots

  * increase by one if it is KVM_MR_CREATE
  * decrease by one if it is KVM_MR_DELETE
  * not change for others

This patch adjusts slots->used_slots in update_memslots() based on "change"
value instead of re-calculate those states again.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-17 00:29:48 +02:00
Vitaly Kuznetsov
a812297c4f KVM: x86: hyperv: optimize 'all cpus' case in kvm_hv_flush_tlb()
We can use 'NULL' to represent 'all cpus' case in
kvm_make_vcpus_request_mask() and avoid building vCPU mask with
all vCPUs.

Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-17 00:29:44 +02:00
Punit Agrawal
fd2ef35828 KVM: arm/arm64: Ensure only THP is candidate for adjustment
PageTransCompoundMap() returns true for hugetlbfs and THP
hugepages. This behaviour incorrectly leads to stage 2 faults for
unsupported hugepage sizes (e.g., 64K hugepage with 4K pages) to be
treated as THP faults.

Tighten the check to filter out hugetlbfs pages. This also leads to
consistently mapping all unsupported hugepage sizes as PTE level
entries at stage 2.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-03 11:49:34 +01:00
Marc Zyngier
9d47bb0d9e KVM: arm64: Drop __cpu_init_stage2 on the VHE path
__cpu_init_stage2 doesn't do anything anymore on arm64, and is
totally non-sensical if running VHE (as VHE is 64bit only).

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-03 11:48:30 +01:00
Marc Zyngier
bca607ebc7 KVM: arm/arm64: Rename kvm_arm_config_vm to kvm_arm_setup_stage2
VM tends to be a very overloaded term in KVM, so let's keep it
to describe the virtual machine. For the virtual memory setup,
let's use the "stage2" suffix.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-03 11:45:29 +01:00
Suzuki K Poulose
0f62f0e95b kvm: arm64: Set a limit on the IPA size
So far we have restricted the IPA size of the VM to the default
value (40bits). Now that we can manage the IPA size per VM and
support dynamic stage2 page tables, we can allow VMs to have
larger IPA. This patch introduces a the maximum IPA size
supported on the host. This is decided by the following factors :

 1) Maximum PARange supported by the CPUs - This can be inferred
    from the system wide safe value.
 2) Maximum PA size supported by the host kernel (48 vs 52)
 3) Number of levels in the host page table (as we base our
    stage2 tables on the host table helpers).

Since the stage2 page table code is dependent on the stage1
page table, we always ensure that :

  Number of Levels at Stage1 >= Number of Levels at Stage2

So we limit the IPA to make sure that the above condition
is satisfied. This will affect the following combinations
of VA_BITS and IPA for different page sizes.

  Host configuration | Unsupported IPA ranges
  39bit VA, 4K       | [44, 48]
  36bit VA, 16K      | [41, 48]
  42bit VA, 64K      | [47, 52]

Supporting the above combinations need independent stage2
page table manipulation code, which would need substantial
changes. We could purse the solution independently and
switch the page table code once we have it ready.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-03 11:44:55 +01:00
Kristina Martsenko
8ad50c8985 vgic: Add support for 52bit guest physical address
Add support for handling 52bit guest physical address to the
VGIC layer. So far we have limited the guest physical address
to 48bits, by explicitly masking the upper bits. This patch
removes the restriction. We do not have to check if the host
supports 52bit as the gpa is always validated during an access.
(e.g, kvm_{read/write}_guest, kvm_is_visible_gfn()).
Also, the ITS table save-restore is also not affected with
the enhancement. The DTE entries already store the bits[51:8]
of the ITT_addr (with a 256byte alignment).

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[ Macro clean ups, fix PROPBASER and PENDBASER accesses ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-01 13:50:32 +01:00
Suzuki K Poulose
e55cac5bf2 kvm: arm/arm64: Prepare for VM specific stage2 translations
Right now the stage2 page table for a VM is hard coded, assuming
an IPA of 40bits. As we are about to add support for per VM IPA,
prepare the stage2 page table helpers to accept the kvm instance
to make the right decision for the VM. No functional changes.
Adds stage2_pgd_size(kvm) to replace S2_PGD_SIZE. Also, moves
some of the definitions in arm32 to align with the arm64.
Also drop the _AC() specifier constants wherever possible.

Cc: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-01 13:50:30 +01:00
Suzuki K Poulose
5b6c6742b5 kvm: arm/arm64: Allow arch specific configurations for VM
Allow the arch backends to perform VM specific initialisation.
This will be later used to handle IPA size configuration and per-VM
VTCR configuration on arm64.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-01 13:50:29 +01:00
Suzuki K Poulose
7788a28062 kvm: arm/arm64: Remove spurious WARN_ON
On a 4-level page table pgd entry can be empty, unlike a 3-level
page table. Remove the spurious WARN_ON() in stage_get_pud().

Acked-by: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-01 13:08:41 +01:00
Suzuki K Poulose
d2db7773ba kvm: arm/arm64: Fix stage2_flush_memslot for 4 level page table
So far we have only supported 3 level page table with fixed IPA of
40bits, where PUD is folded. With 4 level page tables, we need
to check if the PUD entry is valid or not. Fix stage2_flush_memslot()
to do this check, before walking down the table.

Acked-by: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-01 13:08:41 +01:00
Eric W. Biederman
795a837145 signal/arm/kvm: Use send_sig_mceerr
This simplifies the code making it clearer what is going on, and
making the siginfo generation easier to maintain.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27 21:57:43 +02:00
Vladimir Murzin
ab510027dc arm64: KVM: Enable Common Not Private translations
We rely on cpufeature framework to detect and enable CNP so for KVM we
need to patch hyp to set CNP bit just before TTBR0_EL2 gets written.

For the guest we encode CNP bit while building vttbr, so we don't need
to bother with that in a world switch.

Reviewed-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-18 12:03:34 +01:00
Marc Zyngier
a35381e10d KVM: Remove obsolete kvm_unmap_hva notifier backend
kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to
deal with. Drop the now obsolete code.

Fixes: fb1522e099 ("KVM: update to new mmu_notifier semantic v2")
Cc: James Hogan <jhogan@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2018-09-07 15:06:02 +02:00
Marc Zyngier
694556d54f KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
When triggering a CoW, we unmap the RO page via an MMU notifier
(invalidate_range_start), and then populate the new PTE using another
one (change_pte). In the meantime, we'll have copied the old page
into the new one.

The problem is that the data for the new page is sitting in the
cache, and should the guest have an uncached mapping to that page
(or its MMU off), following accesses will bypass the cache.

In a way, this is similar to what happens on a translation fault:
We need to clean the page to the PoC before mapping it. So let's just
do that.

This fixes a KVM unit test regression observed on a HiSilicon platform,
and subsequently reproduced on Seattle.

Fixes: a9c0e12ebe ("KVM: arm/arm64: Only clean the dcache on translation fault")
Cc: stable@vger.kernel.org # v4.16+
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
2018-09-07 15:05:40 +02:00
Linus Torvalds
b372115311 ARM: Support for Group0 interrupts in guests, Cache management
optimizations for ARMv8.4 systems, Userspace interface for RAS, Fault
 path optimization, Emulated physical timer fixes, Random cleanups
 
 x86: fixes for L1TF, a new test case, non-support for SGX (inject the
 right exception in the guest), a lockdep false positive
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJbfXfZAAoJEL/70l94x66DL2QH/RnQZW4OaqVdE3pNvRvaNJGQ
 41yk9aErbqPcK25aIKnhs9e3S+e32BhArA1YBwdHXwwuanANYv5W+o3HNTL0UFj7
 UG6APKm5DR6kJeUZ3vCfyeZ/ZKxDW0uqf5DXQyHUiAhwLGw2wWYJ9Ttv0m0Q4Fxl
 x9HEnK/s+komG93QT+2hIXtZdPiB026yBBqDDPyYiWrweyBagYUHz65p6qaPiOEY
 HqOyLYKsgrqCv9U0NLTD9U54IWGFIaxMGgjyRdZTMCIQeGj6dAH7vyfURGOeDHvw
 C0OZeEKRbMsHLwzXRBDEZp279pYgS7zafe/hMkr/znaac+j6xNwxpWwqg5Sm0UE=
 =5yTH
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second set of KVM updates from Paolo Bonzini:
 "ARM:
   - Support for Group0 interrupts in guests
   - Cache management optimizations for ARMv8.4 systems
   - Userspace interface for RAS
   - Fault path optimization
   - Emulated physical timer fixes
   - Random cleanups

  x86:
   - fixes for L1TF
   - a new test case
   - non-support for SGX (inject the right exception in the guest)
   - fix lockdep false positive"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits)
  KVM: VMX: fixes for vmentry_l1d_flush module parameter
  kvm: selftest: add dirty logging test
  kvm: selftest: pass in extra memory when create vm
  kvm: selftest: include the tools headers
  kvm: selftest: unify the guest port macros
  tools: introduce test_and_clear_bit
  KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled
  KVM: vmx: Inject #UD for SGX ENCLS instruction in guest
  KVM: vmx: Add defines for SGX ENCLS exiting
  x86/kvm/vmx: Fix coding style in vmx_setup_l1d_flush()
  x86: kvm: avoid unused variable warning
  KVM: Documentation: rename the capability of KVM_CAP_ARM_SET_SERROR_ESR
  KVM: arm/arm64: Skip updating PTE entry if no change
  KVM: arm/arm64: Skip updating PMD entry if no change
  KVM: arm: Use true and false for boolean values
  KVM: arm/arm64: vgic: Do not use spin_lock_irqsave/restore with irq disabled
  KVM: arm/arm64: vgic: Move DEBUG_SPINLOCK_BUG_ON to vgic.h
  KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses
  KVM: arm64: vgic-v3: Add support for ICC_SGI0R_EL1 and ICC_ASGI1R_EL1 accesses
  KVM: arm/arm64: vgic-v3: Add core support for Group0 SGIs
  ...
2018-08-22 13:52:44 -07:00
Linus Torvalds
cd9b44f907 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - the rest of MM

 - procfs updates

 - various misc things

 - more y2038 fixes

 - get_maintainer updates

 - lib/ updates

 - checkpatch updates

 - various epoll updates

 - autofs updates

 - hfsplus

 - some reiserfs work

 - fatfs updates

 - signal.c cleanups

 - ipc/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits)
  ipc/util.c: update return value of ipc_getref from int to bool
  ipc/util.c: further variable name cleanups
  ipc: simplify ipc initialization
  ipc: get rid of ids->tables_initialized hack
  lib/rhashtable: guarantee initial hashtable allocation
  lib/rhashtable: simplify bucket_table_alloc()
  ipc: drop ipc_lock()
  ipc/util.c: correct comment in ipc_obtain_object_check
  ipc: rename ipcctl_pre_down_nolock()
  ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()
  ipc: reorganize initialization of kern_ipc_perm.seq
  ipc: compute kern_ipc_perm.id under the ipc lock
  init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE
  fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp
  adfs: use timespec64 for time conversion
  kernel/sysctl.c: fix typos in comments
  drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md
  fork: don't copy inconsistent signal handler state to child
  signal: make get_signal() return bool
  signal: make sigkill_pending() return bool
  ...
2018-08-22 12:34:08 -07:00