Commit Graph

389734 Commits

Author SHA1 Message Date
Jie Liu
6115ea2884 ocfs2: Revert 40bd62e to avoid regression in extended allocation
Revert commit 40bd62eb7f ("fs/ocfs2/journal.h: add bits_wanted while
calculating credits in ocfs2_calc_extend_credits").

Unfortunately this change broke fallocate even if there is insufficient
disk space for the preallocation, which is a serious problem.

  # df -h
  /dev/sda8        22G  1.2G   21G   6% /ocfs2
  # fallocate -o 0 -l 200M /ocfs2/testfile
  fallocate: /ocfs2/test: fallocate failed: No space left on device

and a kernel warning:

  CPU: 3 PID: 3656 Comm: fallocate Tainted: G        W  O 3.11.0-rc3 #2
  Call Trace:
    dump_stack+0x77/0x9e
    warn_slowpath_common+0xc4/0x110
    warn_slowpath_null+0x2a/0x40
    start_this_handle+0x6c/0x640 [jbd2]
    jbd2__journal_start+0x138/0x300 [jbd2]
    jbd2_journal_start+0x23/0x30 [jbd2]
    ocfs2_start_trans+0x166/0x300 [ocfs2]
    __ocfs2_extend_allocation+0x38f/0xdb0 [ocfs2]
    ocfs2_allocate_unwritten_extents+0x3c9/0x520
    __ocfs2_change_file_space+0x5e0/0xa60 [ocfs2]
    ocfs2_fallocate+0xb1/0xe0 [ocfs2]
    do_fallocate+0x1cb/0x220
    SyS_fallocate+0x6f/0xb0
    system_call_fastpath+0x16/0x1b
  JBD2: fallocate wants too many credits (51216 > 4381)

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:49 -07:00
Lothar Waßmann
28a0c88312 drivers/rtc/rtc-stmp3xxx.c: provide timeout for potentially endless loop polling a HW bit
It's always a bad idea to poll on HW bits without a timeout.

The i.MX28 RTC can be easily brought into a state in which the RTC is
not running (until after a power-on-reset) and thus the status bits
which are polled in the driver won't ever change.

This patch prevents the kernel from getting stuck in this case.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Michal Hocko
b610ded719 hugetlb: fix lockdep splat caused by pmd sharing
Dave has reported the following lockdep splat:

  =================================
  [ INFO: inconsistent lock state ]
  3.11.0-rc1+ #9 Not tainted
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/49 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&mapping->i_mmap_mutex){+.+.?.}, at: [<c114971b>] page_referenced+0x87/0x5e3
  {RECLAIM_FS-ON-W} state was registered at:
     mark_held_locks+0x81/0xe7
     lockdep_trace_alloc+0x5e/0xbc
     __alloc_pages_nodemask+0x8b/0x9b6
     __get_free_pages+0x20/0x31
     get_zeroed_page+0x12/0x14
     __pmd_alloc+0x1c/0x6b
     huge_pmd_share+0x265/0x283
     huge_pte_alloc+0x5d/0x71
     hugetlb_fault+0x7c/0x64a
     handle_mm_fault+0x255/0x299
     __do_page_fault+0x142/0x55c
     do_page_fault+0xd/0x16
     error_code+0x6c/0x74
  irq event stamp: 3136917
  hardirqs last  enabled at (3136917):  _raw_spin_unlock_irq+0x27/0x50
  hardirqs last disabled at (3136916):  _raw_spin_lock_irq+0x15/0x78
  softirqs last  enabled at (3136180):  __do_softirq+0x137/0x30f
  softirqs last disabled at (3136175):  irq_exit+0xa8/0xaa
  other info that might help us debug this:
   Possible unsafe locking scenario:
         CPU0
         ----
    lock(&mapping->i_mmap_mutex);
    <Interrupt>
      lock(&mapping->i_mmap_mutex);

  *** DEADLOCK ***
  no locks held by kswapd0/49.

  stack backtrace:
  CPU: 1 PID: 49 Comm: kswapd0 Not tainted 3.11.0-rc1+ #9
  Hardware name: Dell Inc.                 Precision WorkStation 490    /0DT031, BIOS A08 04/25/2008
  Call Trace:
    dump_stack+0x4b/0x79
    print_usage_bug+0x1d9/0x1e3
    mark_lock+0x1e0/0x261
    __lock_acquire+0x623/0x17f2
    lock_acquire+0x7d/0x195
    mutex_lock_nested+0x6c/0x3a7
    page_referenced+0x87/0x5e3
    shrink_page_list+0x3d9/0x947
    shrink_inactive_list+0x155/0x4cb
    shrink_lruvec+0x300/0x5ce
    shrink_zone+0x53/0x14e
    kswapd+0x517/0xa75
    kthread+0xa8/0xaa
    ret_from_kernel_thread+0x1b/0x28

which is a false positive caused by hugetlb pmd sharing code which
allocates a new pmd from withing mapping->i_mmap_mutex.  If this
allocation causes reclaim then the lockdep detector complains that we
might self-deadlock.

This is not correct though, because hugetlb pages are not reclaimable so
their mapping will be never touched from the reclaim path.

The patch tells lockup detector that hugetlb i_mmap_mutex is special by
assigning it a separate lockdep class so it won't report possible
deadlocks on unrelated mappings.

[peterz@infradead.org: comment for annotation]
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Ed Cashin
fb32975d1b aoe: adjust ref of head for compound page tails
Fix a BUG which can trigger when direct-IO is used with AOE.

As discussed previously, the fact that some users of the block layer
provide bios that point to pages with a zero _count means that it is not
OK for the network layer to do a put_page on the skb frags during an
skb_linearize, so the aoe driver gets a reference to pages in bios and
puts the reference before ending the bio.  And because it cannot use
get_page on a page with a zero _count, it manipulates the value
directly.

It is not OK to increment the _count of a compound page tail, though,
since the VM layer will VM_BUG_ON a non-zero _count.  Block users that
do direct I/O can result in the aoe driver seeing compound page tails in
bios.  In that case, the same logic works as long as the head of the
compound page is used instead of the tails.  This patch handles compound
pages and does not BUG.

It relies on the block layer user leaving the relationship between the
page tail and its head alone for the duration between the submission of
the bio and its completion, whether successful or not.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Michal Simek
dfa9771a7c microblaze: fix clone syscall
Fix inadvertent breakage in the clone syscall ABI for Microblaze that
was introduced in commit f3268edbe6 ("microblaze: switch to generic
fork/vfork/clone").

The Microblaze syscall ABI for clone takes the parent tid address in the
4th argument; the third argument slot is used for the stack size.  The
incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd
slot.

This commit restores the original ABI so that existing userspace libc
code will work correctly.

All kernel versions from v3.8-rc1 were affected.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Cyrill Gorcunov
41bb3476b3 mm: save soft-dirty bits on file pages
Andy reported that if file page get reclaimed we lose the soft-dirty bit
if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get
encoded into pte entry.  Thus when #pf happens on such non-present pte
we can restore it back.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:48 -07:00
Cyrill Gorcunov
179ef71cbc mm: save soft-dirty bits on swapped pages
Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set
get swapped out, the bit is getting lost and no longer available when
pte read back.

To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in
pte entry for the page being swapped out.  When such page is to be read
back from a swap cache we check for bit presence and if it's there we
clear it and restore the former _PAGE_SOFT_DIRTY bit back.

One of the problem was to find a place in pte entry where we can save
the _PTE_SWP_SOFT_DIRTY bit while page is in swap.  The _PAGE_PSE was
chosen for that, it doesn't intersect with swap entry format stored in
pte.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:47 -07:00
Andrey Vagin
3e6b11df24 memcg: don't initialize kmem-cache destroying work for root caches
struct memcg_cache_params has a union.  Different parts of this union
are used for root and non-root caches.  A part with destroying work is
used only for non-root caches.

I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but
didn't notice this one.

This patch fixes the kernel panic:

[   46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8
[   46.849026] IP: [<ffffffff811a484c>] kmem_cache_destroy_memcg_children+0x6c/0xc0
[   46.849092] PGD 0
[   46.849092] Oops: 0000 [#1] SMP
...

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: <stable@vger.kernel.org>    [3.9.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 17:57:47 -07:00
Hannes Frederic Sowa
fc4eba58b4 ipv6: make unsolicited report intervals configurable for mld
Commit cab70040df ("net: igmp:
Reduce Unsolicited report interval to 1s when using IGMPv3") and
2690048c01 ("net: igmp: Allow user-space
configuration of igmp unsolicited report interval") by William Manley made
igmp unsolicited report intervals configurable per interface and corrected
the interval of unsolicited igmpv3 report messages resendings to 1s.

Same needs to be done for IPv6:

MLDv1 (RFC2710 7.10.): 10 seconds
MLDv2 (RFC3810 9.11.): 1 second

Both intervals are configurable via new procfs knobs
mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval.

(also added .force_mld_version to ipv6_devconf_dflt to bring structs in
line without semantic changes)

v2:
a) Joined documentation update for IPv4 and IPv6 MLD/IGMP
   unsolicited_report_interval procfs knobs.
b) incorporate stylistic feedback from William Manley

v3:
a) add new DEVCONF_* values to the end of the enum (thanks to David
   Miller)

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: William Manley <william.manley@youview.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 17:05:04 -07:00
Alexey Brodkin
9cff866e37 ethernet/arc/arc_emac - fix NAPI "work > weight" warning
Initially I improperly set a boundary for maximum number of input
packets to process on NAPI poll ("work") so it might be more than
expected amount ("weight").

This was really harmless but seeing WARN_ON_ONCE on every device boot is
not nice. So trivial fix ("<" instead of "<=") is here.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 17:00:45 -07:00
Linus Torvalds
28fbc8b6a2 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
 "Docbook fixes that make 99% of the diffstat, plus a oneliner fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Ensure update_cfs_shares() is called for parents of continuously-running tasks
  sched: Fix some kernel-doc warnings
2013-08-13 16:58:17 -07:00
Linus Torvalds
bfd3605087 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Two small fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Add Haswell ULT model number used in Macbook Air and other systems
  perf/x86: Fix intel QPI uncore event definitions
2013-08-13 16:57:40 -07:00
Stephen Boyd
b88a2595b6 perf/arm: Fix armpmu_map_hw_event()
Fix constraint check in armpmu_map_hw_event().

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 16:57:24 -07:00
Pravin B Shelar
4221f40513 ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.
Using inner-id for tunnel id is not safe in some rare cases.
E.g. packets coming from multiple sources entering same tunnel
can have same id. Therefore on tunnel packet receive we
could have packets from two different stream but with same
source and dst IP with same ip-id which could confuse ip packet
reassembly.

Following patch reverts optimization from commit
490ab08127 (IP_GRE: Fix IP-Identification.)

CC: Jarno Rajahalme <jrajahalme@nicira.com>
CC: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:52:50 -07:00
Yuchung Cheng
74c181d528 tcp: reset reordering est. selectively on timeout
On timeout the TCP sender unconditionally resets the estimated degree
of network reordering (tp->reordering). The idea behind this is that
the estimate is too large to trigger fast recovery (e.g., due to a IP
path change).

But for example if the sender only had 2 packets outstanding, then a
timeout doesn't tell much about reordering. A sender that learns about
reordering on big writes and loses packets on small writes will end up
falsely retransmitting again and again, especially when reordering is
more likely on big writes.

Therefore the sender should only suspect that tp->reordering is too
high if it could have gone into fast recovery with the (lower) default
estimate.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:08:33 -07:00
David S. Miller
50f850fdf9 Merge branch 'bnx2x'
Dmitry Kravkov says:

====================
Please consider applying the series of bnx2x fixes to net:
	* statistics may cause FW assert
	* missing fairness configuration in DCB flow
	* memory leak in sriov related part
	* Illegal PTE access
	* Pagefault crash in shutdown flow with cnic
v1->v2
	* fixed sparse error pointed by Joe Perches
	* added missing signed-off from Sergei Shtylyov
v2->v3
	* added missing signed-off from Sergei Shtylyov
	* fixed formatting from Sergei Shtylyov
v3->v4
	* patch 1/6: fixed declaration order
	* patch 2/6 replaced with: protect flows using set_bit constraints
v4->v5
	* patch 2/6: replace proprietary locking with semaphore
	* droped 1/6: since adds redundant code from Benjamin Poirier
The following patchset contains four netfilter fixes, they are:

* Fix possible invalid access and mangling of the TCPMSS option in
  xt_TCPMSS. This was spotted by Julian Anastasov.

* Fix possible off by one access and mangling of the TCP packet in
  xt_TCPOPTSTRIP, also spotted by Julian Anastasov.

* Fix possible information leak due to missing initialization of one
  padding field of several structures that are included in nfqueue and
  nflog netlink messages, from Dan Carpenter.

* Fix TCP window tracking with Fast Open, from Yuchung Cheng.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:38 -07:00
Yuval Mintz
6ef5a92cdf bnx2x: prevent crash in shutdown flow with CNIC
There might be a crash as during shutdown flow CNIC might try
to access resources already freed by bnx2x.
Change bnx2x_close() into dev_close() in __bnx2x_remove (shutdown flow)
to guarantee CNIC is notified of the device's change of status.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Barak Witkowsky
a6d3a5ba3e bnx2x: fix PTE write access error
PTE write access error  might occur in MF_ALLOWED mode when IOMMU
is active. The patch adds rmmod HSI indicating to MFW to stop
running queries which might trigger this failure.

Signed-off-by: Barak Witkowsky <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Ariel Elior
8ece516518 bnx2x: fix memory leak in VF
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Dmitry Kravkov
568e24260f bnx2x: update fairness parameters following DCB negotiation
ETS can be enabled as a result of DCB negotiation, then
fairness must be recalculated after each negotiation.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
Dmitry Kravkov
507393eb29 bnx2x: protect different statistics flows
Add locking to protect different statistics flows from
running simultaneously.
This in order to serialize statistics requests sent to FW,
otherwise two outstanding queries may cause FW assert.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 16:04:28 -07:00
David S. Miller
98f1b7f382 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
This is a batch of updates intended for 3.12.  It is mostly driver
stuff, although Johannes Berg and Simon Wunderlich make a good
showing with mac80211 bits (particularly some work on 5/10 MHz
channel support).

The usual suspects are mostly represented.  There are lots of updates
to iwlwifi, ath9k, ath10k, mwifiex, rt2x00, wil6210, as usual.
The bcma bus gets some love this time, as do cw1200, iwl4965, and a
few other bits here and there.  I don't think there is much unusual
here, FWIW.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:59:09 -07:00
Mugunthan V N
926489be1d drivers: net: cpsw: Add support for new CPSW IP version present in AM43xx SoC
The new IP version which is present in AM43xx SoC has a minor changes and the
offsets are same as the previous version, so adding new IP version support in
the driver.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:53:17 -07:00
Stephen Boyd
40fea92ffb PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout()
pm_qos_update_request_timeout() updates a qos and then schedules
a delayed work item to bring the qos back down to the default
after the timeout. When the work item runs, pm_qos_work_fn() will
call pm_qos_update_request() and deadlock because it tries to
cancel itself via cancel_delayed_work_sync(). Future callers of
that qos will also hang waiting to cancel the work that is
canceling itself. Let's extract the little bit of code that does
the real work of pm_qos_update_request() and call it from the
work function so that we don't deadlock.

Before ed1ac6e (PM: don't use [delayed_]work_pending()) this didn't
happen because the work function wouldn't try to cancel itself.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-14 00:42:05 +02:00
Claudiu Manoil
23402bddf9 gianfar: Add flow control support
eTSEC has Rx and Tx flow control capabilities that may be enabled
through MACCFG1[Rx_Flow, Tx_Flow] bits.  These bits must not be set
however when eTSEC is operated in Half-Duplex mode.  Unfortunately,
the driver currently sets these bits unconditionally.
This patch adds the proper handling of the PAUSE frame capability
register bits by implementing the ethtool -A interface.  When pause
autoneg is enabled, the controller uses the phy's capability to
negotiate PAUSE frame settings with the link partner and reconfigures
its Rx_Flow and Tx_Flow settings to match the capabilities of the
link partner.  If pause autoneg is off, the PAUSE frame generation
may be forced manually (ethtool -A).  Flow control is disabled by
default now.
This implementation is inspired by the tg3 driver.

Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:28:53 -07:00
Hyong-Youb Kim
205057aeb3 myri10ge: Update MAINTAINERS
Remove Andrew Gallatin, as he is no longer with Myricom. Add
Hyong-Youb Kim as the new maintainer. Update the website URL.

Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:25:25 -07:00
stephen hemminger
ebd8b934e2 pptp: fix byte order warnings
Pptp driver has lots of byte order warnings from sparse.
This was because the on-the-wire header is in network byte order (obviously)
but the definition did not reflect that.

Also, the address structure to user space actually put the call id
in host order. Rather than break ABI compatibility, just acknowledge
the existing design.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:10:22 -07:00
stephen hemminger
e47851f13d skge: dma_sync the whole receive buffer
The DMA sync should sync the whole receive buffer, not just
part of it. Fixes log messages dma_sync_check.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:09:06 -07:00
Vlad Yasevich
072017b41e net: sctp: Add rudimentary infrastructure to account for control chunks
This patch adds a base infrastructure that allows SCTP to do
memory accounting for control chunks.  Real accounting code will
follow.

This patch alos fixes the following triggered bug ...

[  553.109742] kernel BUG at include/linux/skbuff.h:1813!
[  553.109766] invalid opcode: 0000 [#1] SMP
[  553.109789] Modules linked in: sctp libcrc32c rfcomm [...]
[  553.110259]  uinput i915 i2c_algo_bit drm_kms_helper e1000e drm ptp
pps_core i2c_core wmi video sunrpc
[  553.110320] CPU: 0 PID: 1636 Comm: lt-test_1_to_1_ Not tainted
3.11.0-rc3+ #2
[  553.110350] Hardware name: LENOVO 74597D6/74597D6, BIOS 6DET60WW
(3.10 ) 09/17/2009
[  553.110381] task: ffff88020a01dd40 ti: ffff880204ed0000 task.ti:
ffff880204ed0000
[  553.110411] RIP: 0010:[<ffffffffa0698017>]  [<ffffffffa0698017>]
skb_orphan.part.9+0x4/0x6 [sctp]
[  553.110459] RSP: 0018:ffff880204ed1bb8  EFLAGS: 00010286
[  553.110483] RAX: ffff8802086f5a40 RBX: ffff880204303300 RCX:
0000000000000000
[  553.110487] RDX: ffff880204303c28 RSI: ffff8802086f5a40 RDI:
ffff880202158000
[  553.110487] RBP: ffff880204ed1bb8 R08: 0000000000000000 R09:
0000000000000000
[  553.110487] R10: ffff88022f2d9a04 R11: ffff880233001600 R12:
0000000000000000
[  553.110487] R13: ffff880204303c00 R14: ffff8802293d0000 R15:
ffff880202158000
[  553.110487] FS:  00007f31b31fe740(0000) GS:ffff88023bc00000(0000)
knlGS:0000000000000000
[  553.110487] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  553.110487] CR2: 000000379980e3e0 CR3: 000000020d225000 CR4:
00000000000407f0
[  553.110487] Stack:
[  553.110487]  ffff880204ed1ca8 ffffffffa068d7fc 0000000000000000
0000000000000000
[  553.110487]  0000000000000000 ffff8802293d0000 ffff880202158000
ffffffff81cb7900
[  553.110487]  0000000000000000 0000400000001c68 ffff8802086f5a40
000000000000000f
[  553.110487] Call Trace:
[  553.110487]  [<ffffffffa068d7fc>] sctp_sendmsg+0x6bc/0xc80 [sctp]
[  553.110487]  [<ffffffff8128f185>] ? sock_has_perm+0x75/0x90
[  553.110487]  [<ffffffff815a3593>] inet_sendmsg+0x63/0xb0
[  553.110487]  [<ffffffff8128f2b3>] ? selinux_socket_sendmsg+0x23/0x30
[  553.110487]  [<ffffffff8151c5d6>] sock_sendmsg+0xa6/0xd0
[  553.110487]  [<ffffffff81637b05>] ? _raw_spin_unlock_bh+0x15/0x20
[  553.110487]  [<ffffffff8151cd38>] SYSC_sendto+0x128/0x180
[  553.110487]  [<ffffffff8151ce6b>] ? SYSC_connect+0xdb/0x100
[  553.110487]  [<ffffffffa0690031>] ? sctp_inet_listen+0x71/0x1f0
[sctp]
[  553.110487]  [<ffffffff8151d35e>] SyS_sendto+0xe/0x10
[  553.110487]  [<ffffffff81640202>] system_call_fastpath+0x16/0x1b
[  553.110487] Code: e0 48 c7 c7 00 22 6a a0 e8 67 a3 f0 e0 48 c7 [...]
[  553.110487] RIP  [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6
[sctp]
[  553.110487]  RSP <ffff880204ed1bb8>
[  553.121578] ---[ end trace 46c20c5903ef5be2 ]---

The approach taken here is to split data and control chunks
creation a  bit.  Data chunks already have memory accounting
so noting needs to happen.  For control chunks, add stubs handlers.

Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 15:04:02 -07:00
Mark Brown
55d10a11ae net: asix: Move declaration of ax88172a_info to shared header
Ensure that the definition of ax88172a_info matches the declaration seen
by users and silence sparse warnings about symbols without declarations
in the global namespace by moving the declaration into the shared header
asix.h.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 14:13:52 -07:00
Mark Brown
cbeee8c65f net: asix: Staticise non-exported symbols
Make functions that are only referenced from ops structures static, they
do not need to be in the global namespace and sparse complains about this.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 14:13:52 -07:00
Sylwester Nawrocki
a701fe3851 clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks
The ISP clock registers belong to the ISP power domain and may change
their values if this power domain is switched off/on. Add
CLK_GET_RATE_NOCACHE flags to ensure we do not rely on invalid cached
data when setting or getting frequency of those clocks.

Without this fix the FIMC-IS Cortex-A5 core and AXI bus clocks have
incorrect frequencies, which breaks the ISP operation and starting the
video pipeline fails with timeouts reported by the FIMC-IS firmware.

See related commit 722a860ecb "[media]
exynos4-is: Fix FIMC-IS clocks initialization" for more details.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-13 10:01:56 -07:00
Soren Brinkmann
765b7d4c4c clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
Zynq's Ethernet clocks are created by the following hierarchy:
	mux0 ---> div0 ---> div1 ---> mux1 ---> gate
Rate change requests on the gate have to propagate all the way up to
div0 to properly leverage all dividers. Mux1 was missing the
CLK_SET_RATE_PARENT flag, which is required to achieve this.

This does not fix a specific regression but the clock driver was merged
for 3.11-rc1, so best to fix the known bugs before the release.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added to changelog]
2013-08-13 10:01:55 -07:00
Soren Brinkmann
252957cc3a clk/zynq/clkc: Add dedicated spinlock for the SWDT
The clk_mux for the system watchdog timer reused the register lock
dedicated to the Ethernet module - for no apparent reason.
Add a lock dedicated to the SWDT's clock register to remove this
wrong dependency.

This does not fix a specific regression but the clock driver was merged
for 3.11-rc1, so best to fix the known bugs before the release.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added to changelog]
2013-08-13 10:01:55 -07:00
Oleg Nesterov
e0acd0a68e sched: fix the theoretical signal_wake_up() vs schedule() race
This is only theoretical, but after try_to_wake_up(p) was changed
to check p->state under p->pi_lock the code like

	__set_current_state(TASK_INTERRUPTIBLE);
	schedule();

can miss a signal. This is the special case of wait-for-condition,
it relies on try_to_wake_up/schedule interaction and thus it does
not need mb() between __set_current_state() and if(signal_pending).

However, this __set_current_state() can move into the critical
section protected by rq->lock, now that try_to_wake_up() takes
another lock we need to ensure that it can't be reordered with
"if (signal_pending(current))" check inside that section.

The patch is actually one-liner, it simply adds smp_wmb() before
spin_lock_irq(rq->lock). This is what try_to_wake_up() already
does by the same reason.

We turn this wmb() into the new helper, smp_mb__before_spinlock(),
for better documentation and to allow the architectures to change
the default implementation.

While at it, kill smp_mb__after_lock(), it has no callers.

Perhaps we can also add smp_mb__before/after_spinunlock() for
prepare_to_wait().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13 08:19:26 -07:00
Pablo Neira Ayuso
bd07793705 netfilter: nfnetlink_queue: allow to attach expectations to conntracks
This patch adds the capability to attach expectations via nfnetlink_queue.
This is required by conntrack helpers that trigger expectations based on
the first packet seen like the TFTP and the DHCPv6 user-space helpers.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-13 16:32:10 +02:00
Pablo Neira Ayuso
0ef71ee1a5 netfilter: ctnetlink: refactor ctnetlink_create_expect
This patch refactors ctnetlink_create_expect by spliting it in two
chunks. As a result, we have a new function ctnetlink_alloc_expect
to allocate and to setup the expectation from ctnetlink.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-13 15:48:20 +02:00
Johannes Berg
58ad436fcf genetlink: fix family dump race
When dumping generic netlink families, only the first dump call
is locked with genl_lock(), which protects the list of families,
and thus subsequent calls can access the data without locking,
racing against family addition/removal. This can cause a crash.
Fix it - the locking needs to be conditional because the first
time around it's already locked.

A similar bug was reported to me on an old kernel (3.4.47) but
the exact scenario that happened there is no longer possible,
on those kernels the first round wasn't locked either. Looking
at the current code I found the race described above, which had
also existed on the old kernel.

Cc: stable@vger.kernel.org
Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13 00:57:06 -07:00
Daniel Borkmann
771085d6bf net: sctp: sctp_transport_destroy{, _rcu}: fix potential pointer corruption
Probably this one is quite unlikely to be triggered, but it's more safe
to do the call_rcu() at the end after we have dropped the reference on
the asoc and freed sctp packet chunks. The reason why is because in
sctp_transport_destroy_rcu() the transport is being kfree()'d, and if
we're unlucky enough we could run into corrupted pointers. Probably
that's more of theoretical nature, but it's safer to have this simple fix.

Introduced by commit 8c98653f ("sctp: sctp_close: fix release of bindings
for deferred call_rcu's"). I also did the 8c98653f regression test and
it's fine that way.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12 22:13:47 -07:00
Daniel Borkmann
ac4f959936 net: sctp: sctp_assoc_control_transport: fix MTU size in SCTP_PF state
The SCTP Quick failover draft [1] section 5.1, point 5 says that the cwnd
should be 1 MTU. So, instead of 1, set it to 1 MTU.

  [1] https://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05

Reported-by: Karl Heiss <kheiss@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12 22:12:20 -07:00
Bartlomiej Zolnierkiewicz
5632913721 stmmac: fix init_dma_desc_rings() to handle errors
In stmmac_init_rx_buffers():
* add missing handling of dma_map_single() error
* remove superfluous unlikely() optimization while at it

Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs().

In init_dma_desc_rings():
* add missing handling of kmalloc_array() errors
* fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors
* make function return an error value on error and 0 on success

In stmmac_open():
* add handling of init_dma_desc_rings() return value

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-12 22:11:29 -07:00
Linus Torvalds
584d88b2cd Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
 "A set of small cifs fixes, including 3 relating to symlink handling"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: don't instantiate new dentries in readdir for inodes that need to be revalidated immediately
  cifs: set sb->s_d_op before calling d_make_root()
  cifs: fix bad error handling in crypto code
  cifs: file: initialize oparms.reconnect before using it
  Do not attempt to do cifs operations reading symlinks with SMB2
  cifs: extend the buffer length enought for sprintf() using
2013-08-12 15:02:53 -07:00
Linus Torvalds
fd4f35d0fa A number of miscellaneous ext4 bugs fixes for v3.11, including a fix
so that if ext4 is built as a module, to allow it to be unloaded.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJSCOS0AAoJENNvdpvBGATwOYkQALgOTX2ma7hgCr91ldg3Q69e
 bejRm2Prdjs3HXa3MwC5yZ0i2nDXxTjMXidnVcD2QgLwS6rPGQQfrGhQ1OtJqLxA
 Gzf6mHIWIaRG9/JtTkzp3ucONbhc13LnaJd9B2bHASlq4+5aJhlziblwapMSvVbI
 YixhejVREmXdZ/typvnQOsoPfXzH9NLOTY/asT9IcZK6flhczNIlMC0/zRZQw0+I
 pDK/akmdOLpkd57UvJcwdcGIgcioSrg+JXk++EsDe82v2bpxleG2IdLbVZ76whIS
 A3FHEJvUfiFPj+GhKMQJyI1sa1ZGmD7nH8n2Yf6TVqZ4jgFx4ox9d83c0PpSLn0+
 VTZD601lfAoThUwKRTk45FUI4siZ1zBP13cbTH1DJXvGVllehhC9zBCezlNma4vr
 cI+K3d8VBHV7bKSRSgRVcB2pY+bJE1qP5XJXGnfDhjEiecNgXFRm0i2UtYSEl6R7
 aQGAdfjxp6tf+gme6c13zFK43FEJ9/DMaC8l0eamiQyH5U4OhOD8Q4ExnHjrfN69
 V3yZc4AZq46J9+2H/Jc457NYiFH2YK74jpAcpsVV0fXKFDR8Ss+rKXmfB+TGS45f
 Q1eHbKLuA3fHzHfwJCozqnUBxQO41M4vEd/ktqenwsKzeOw0qH3qynxEUd6xgka5
 1pcnJZnSGbm1d8pwYLMc
 =NuDG
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull more ext4 bugfixes from Ted Ts'o:
 "A number of miscellaneous ext4 bugs fixes for v3.11, including a fix
  so that if ext4 is built as a module, to allow it to be unloaded"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT
  ext4: fix mount/remount error messages for incompatible mount options
  ext4: allow the mount options nodelalloc and data=journal
2013-08-12 15:00:40 -07:00
Johan Hovold
e877dd2f25 USB: ti_usb_3410_5052: fix big-endian firmware handling
Fix endianess bugs in firmware handling introduced by commits cb7a7c6a
("ti_usb_3410_5052: add Multi-Tech modem support") and 05a3d905
("ti_usb_3410_5052: support alternate firmware") which made the driver
use the wrong firmware for certain devices on big-endian machines.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:52:35 -07:00
Johan Hovold
d482b9d558 USB: adutux: fix big-endian device-type reporting
Make sure the reported device-type on big-endian machines is the same as
on little-endian ones.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:52:35 -07:00
Johan Hovold
c786138fcc USB: usbtmc: fix big-endian probe of Rigol devices
Fix probe of Rigol devices on big-endian machines. A quirk for these
devices was introduced by commit c2e314835 ("USB: usbtmc: Set
rigol_quirk if device is listed") but was only enabled on little-endian
machines.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:52:35 -07:00
Johan Hovold
d551ec9b69 USB: mos7840: fix big-endian probe
Fix bug in device-type detection on big-endian machines originally
introduced by commit 0eafe4de ("USB: serial: mos7840: add support for
MCS7810 devices") which always matched on little-endian product ids.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:52:35 -07:00
Matt Burtch
6c1ee66a0b USB-Serial: Fix error handling of usb_wwan
This fixes an issue where the bulk-in urb used for incoming data transfer
is not resubmitted if the packet recieved contains an error status.  This
results in the driver locking until the port is closed and re-opened.

Tested on a custom board with a Cinterion GSM module.

Signed-off-by: Matt Burtch <matt@grid-net.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:45:26 -07:00
Thomas Pugliese
ec58fad1fe wusbcore: fix kernel panic when disconnecting a wireless USB->serial device
This patch fixes a kernel panic that can occur when disconnecting a
wireless USB->serial device.  When the serial device disconnects, the
device cleanup procedure ends up calling usb_hcd_disable_endpoint on the
serial device's endpoints.  The wusbcore uses the ABORT_RPIPE command to
abort all transfers on the given endpoint but it does not properly give
back the URBs when the transfer results return from the HWA.  This patch
prevents the transfer result processing code from bailing out when it sees
a WA_XFER_STATUS_ABORTED result code so that these urbs are flushed
properly by usb_hcd_disable_endpoint.  It also updates wa_urb_dequeue to
handle the case where the endpoint has already been cleaned up when
usb_kill_urb is called which is where the panic originally occurred.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:45:26 -07:00
Alan Stern
24f531371d USB: EHCI: accept very late isochronous URBs
Since commits 4005ad4390 (EHCI: implement new semantics for
URB_ISO_ASAP) and c75c5ab575 (ALSA: USB: adjust for changed 3.8 USB
API) became widely distributed, people have been experiencing problems
with audio transfers.  The slightest underrun causes complete failure,
requiring the audio stream to be restarted.

It turns out that the current isochronous API doesn't handle underruns
in the best way.  The ALSA developers would much rather have transfers
that are submitted too late be accepted and complete in the normal
fashion, rather than being refused outright.

This patch implements the requested approach.  When an isochronous URB
submission is so late that all its scheduled slots have already
expired, a debugging message will be printed in the log and the URB
will be accepted as usual.  Assuming it was submitted by a completion
handler (which is normally the case), it will complete shortly
thereafter with all the usb_iso_packet_descriptor status fields marked
-EXDEV.

This fixes (for ehci-hcd)

	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1191603

It should be applied to all kernels that include commit 4005ad4390.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Maksim Boyko <maksboyko@yandex.ru>
CC: Clemens Ladisch <clemens@ladisch.de>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 13:45:26 -07:00