The input buffers passed down to compression must never be changed,
switch type to u8 as it's a raw byte buffer and use const.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will make syncing fs.h to user space a little easier if we can pull
the super block specific helpers out of fs.h and put them in super.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The use of kmap() is being deprecated in favor of kmap_local_page() where
it is feasible. With kmap_local_page(), the mapping is per thread, CPU
local and not globally visible.
Therefore, use kmap_local_page() / kunmap_local() in lzo.c wherever the
mappings are per thread and not globally visible.
Tested on QEMU + KVM 32 bits VM with 4GB of RAM and HIGHMEM64G enabled.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It makes it more readable for length checking and is be used repeatedly.
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=/pKc
-----END PGP SIGNATURE-----
Merge tag 'for-5.16-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix to the lzo code, a missing put_page causing memory leaks
when some error branches are taken"
* tag 'for-5.16-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the memory leak caused in lzo_compress_pages()
[BUG]
Fstests generic/027 is pretty easy to trigger a slow but steady memory
leak if run with "-o compress=lzo" mount option.
Normally one single run of generic/027 is enough to eat up at least 4G ram.
[CAUSE]
In commit d4088803f5 ("btrfs: subpage: make lzo_compress_pages()
compatible") we changed how @page_in is released.
But that refactoring makes @page_in only released after all pages being
compressed.
This leaves error path not releasing @page_in. And by "error path"
things like incompressible data will also be treated as an error
(-E2BIG).
Thus it can cause a memory leak if even nothing wrong happened.
[FIX]
Add check under @out label to release @page_in when needed, so when we
hit any error, the input page is properly released.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: d4088803f5 ("btrfs: subpage: make lzo_compress_pages() compatible")
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=ze0L
-----END PGP SIGNATURE-----
Merge tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several xes and one old ioctl deprecation. Namely there's fix for
crashes/warnings with lzo compression that was suspected to be caused
by first pull merge resolution, but it was a different bug.
Summary:
- regression fix for a crash in lzo due to missing boundary checks of
the page array
- fix crashes on ARM64 due to missing barriers when synchronizing
status bits between work queues
- silence lockdep when reading chunk tree during mount
- fix false positive warning in integrity checker on devices with
disabled write caching
- fix signedness of bitfields in scrub
- start deprecation of balance v1 ioctl"
* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: deprecate BTRFS_IOC_BALANCE ioctl
btrfs: make 1-bit bit-fields of scrub_page unsigned int
btrfs: check-integrity: fix a warning on write caching disabled disk
btrfs: silence lockdep when reading chunk tree during mount
btrfs: fix memory ordering between normal and ordered work functions
btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
[BUG]
The following script can cause btrfs to crash:
$ mount -o compress-force=lzo $DEV /mnt
$ dd if=/dev/urandom of=/mnt/foo bs=4k count=1
$ sync
The call trace looks like this:
general protection fault, probably for non-canonical address 0xe04b37fccce3b000: 0000 [#1] PREEMPT SMP NOPTI
CPU: 5 PID: 164 Comm: kworker/u20:3 Not tainted 5.15.0-rc7-custom+ #4
Workqueue: btrfs-delalloc btrfs_work_helper [btrfs]
RIP: 0010:__memcpy+0x12/0x20
Call Trace:
lzo_compress_pages+0x236/0x540 [btrfs]
btrfs_compress_pages+0xaa/0xf0 [btrfs]
compress_file_range+0x431/0x8e0 [btrfs]
async_cow_start+0x12/0x30 [btrfs]
btrfs_work_helper+0xf6/0x3e0 [btrfs]
process_one_work+0x294/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
---[ end trace 63c3c0f131e61982 ]---
[CAUSE]
In lzo_compress_pages(), parameter @out_pages is not only an output
parameter (for the number of compressed pages), but also an input
parameter, as the upper limit of compressed pages we can utilize.
In commit d4088803f5 ("btrfs: subpage: make lzo_compress_pages()
compatible"), the refactoring doesn't take @out_pages as an input, thus
completely ignoring the limit.
And for compress-force case, we could hit incompressible data that
compressed size would go beyond the page limit, and cause the above
crash.
[FIX]
Save @out_pages as @max_nr_page, and pass it to lzo_compress_pages(),
and check if we're beyond the limit before accessing the pages.
Note: this also fixes crash on 32bit architectures that was suspected to
be caused by merge of btrfs patches to 5.16-rc1. Reported in
https://lore.kernel.org/all/20211104115001.GU20319@twin.jikos.cz/ .
Reported-by: Omar Sandoval <osandov@fb.com>
Fixes: d4088803f5 ("btrfs: subpage: make lzo_compress_pages() compatible")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=HvYu
-----END PGP SIGNATURE-----
Merge tag 'for-5.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The updates this time are more under the hood and enhancing existing
features (subpage with compression and zoned namespaces).
Performance related:
- misc small inode logging improvements (+3% throughput, -11% latency
on sample dbench workload)
- more efficient directory logging: bulk item insertion, less tree
searches and locking
- speed up bulk insertion of items into a b-tree, which is used when
logging directories, when running delayed items for directories
(fsync and transaction commits) and when running the slow path
(full sync) of an fsync (bulk creation run time -4%, deletion -12%)
Core:
- continued subpage support
- make defragmentation work
- make compression write work
- zoned mode
- support ZNS (zoned namespaces), zone capacity is number of
usable blocks in each zone
- add dedicated block group (zoned) for relocation, to prevent
out of order writes in some cases
- greedy block group reclaim, pick the ones with least usable
space first
- preparatory work for send protocol updates
- error handling improvements
- cleanups and refactoring
Fixes:
- lockdep warnings
- in show_devname callback, on seeding device
- device delete on loop device due to conversions to workqueues
- fix deadlock between chunk allocation and chunk btree modifications
- fix tracking of missing device count and status"
* tag 'for-5.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (140 commits)
btrfs: remove root argument from check_item_in_log()
btrfs: remove root argument from add_link()
btrfs: remove root argument from btrfs_unlink_inode()
btrfs: remove root argument from drop_one_dir_item()
btrfs: clear MISSING device status bit in btrfs_close_one_device
btrfs: call btrfs_check_rw_degradable only if there is a missing device
btrfs: send: prepare for v2 protocol
btrfs: fix comment about sector sizes supported in 64K systems
btrfs: update device path inode time instead of bd_inode
fs: export an inode_update_time helper
btrfs: fix deadlock when defragging transparent huge pages
btrfs: sysfs: convert scnprintf and snprintf to sysfs_emit
btrfs: make btrfs_super_block size match BTRFS_SUPER_INFO_SIZE
btrfs: update comments for chunk allocation -ENOSPC cases
btrfs: fix deadlock between chunk allocation and chunk btree modifications
btrfs: zoned: use greedy gc for auto reclaim
btrfs: check-integrity: stop storing the block device name in btrfsic_dev_state
btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls
btrfs: add a btrfs_get_dev_args_from_path helper
btrfs: handle device lookup with btrfs_dev_lookup_args
...
Commit ccaa66c8dd reinstated the kmap/kunmap that had been dropped in
commit 8c945d32e6 ("btrfs: compression: drop kmap/kunmap from lzo").
However, it seems to have done so incorrectly due to the change not
reverting cleanly, and lzo_decompress_bio() ended up not having a
matching "kunmap()" to the "kmap()" that was put back.
Also, any assert that the page pointer is not NULL should be before the
kmap() of said pointer, since otherwise you'd just oops in the kmap()
before the assert would even trigger.
I noticed this when trying to verify my btrfs merge, and things not
adding up. I'm doing this fixup before re-doing my merge, because this
commit needs to also be backported to 5.15 (after verification from the
btrfs people).
Fixes: ccaa66c8dd ("Revert 'btrfs: compression: drop kmap/kunmap from lzo'")
Cc: David Sterba <dsterba@suse.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 8c945d32e6.
The kmaps in compression code are still needed and cause crashes on
32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004
with enabled LZO or ZSTD compression.
The revert does not apply cleanly due to changes in a6e66e6f8c
("btrfs: rework lzo_decompress_bio() to make it subpage compatible")
that reworked the page iteration so the revert is done to be equivalent
to the original code.
Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839
Tested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several problems in lzo_compress_pages() preventing it from
being subpage compatible:
- No page offset is calculated when reading from inode pages
For subpage case, we could have @start which is not aligned to
PAGE_SIZE.
Thus the destination where we read data from must take offset in page
into consideration.
- The padding for segment header is bound to PAGE_SIZE
This means, for subpage case we can skip several corners where on x86
machines we need to add padding zeros.
The rework will:
- Update the comment to replace "page" with "sector"
- Introduce a new helper, copy_compressed_data_to_page(), to do the copy
So that we don't need to bother page switching for both input and
output.
Now in lzo_compress_pages() we only care about page switching for
input, while in copy_compressed_data_to_page() we only care about the
page switching for output.
- Only one main cursor
For lzo_compress_pages() we use @cur_in as main cursor.
It will be the file offset we are currently at.
All other helper variables will be only declared inside the loop.
For copy_compressed_data_to_page() it's similar, we will have
@cur_out at the main cursor, which records how many bytes are in the
output.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the initial subpage support, although we won't support compressed
write, we still need to support compressed read.
But for lzo_decompress_bio() it has several problems:
- The abuse of PAGE_SIZE for boundary detection
For subpage case, we should follow sectorsize to detect the padding
zeros.
Using PAGE_SIZE will cause subpage compress read to skip certain
bytes, and causing read error.
- Too many helper variables
There are half a dozen helper variables, which is only making things
harder to read
This patch will rework lzo_decompress_bio() to make it work for subpage:
- Use sectorsize to do boundary check, while still use PAGE_SIZE for
page switching
This allows us to have the same on-disk format for 4K sectorsize fs,
while take advantage of larger page size.
- Use two main cursors
Only @cur_in and @cur_out is utilized as the main cursor.
The helper variables will only be declared inside the loop, and only 2
helper variables needed.
- Introduce a helper function to copy compressed segment payload
Introduce a new helper, copy_compressed_segment(), to copy a
compressed segment to workspace buffer.
This function will handle the page switching.
Now the net result is, with all the excessive comments and new helper
function, the refactored code is still smaller, and easier to read.
For other decompression code, they have no special padding rule, thus no
need to bother for initial subpage support, but will be refactored to
the same style later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several bugs inside the function btrfs_decompress_buf2page()
- @start_byte doesn't take bvec.bv_offset into consideration
Thus it can't handle case where the target range is not page aligned.
- Too many helper variables
There are tons of helper variables, @buf_offset, @current_buf_start,
@start_byte, @prev_start_byte, @working_bytes, @bytes.
This hurts anyone who wants to read the function.
- No obvious main cursor for the iteartion
A new problem caused by previous problem.
- Comments for parameter list makes no sense
Like @buf_start is the offset to @buf, or offset inside the full
decompressed extent? (Spoiler alert, the later case)
And @total_out acts more like @buf_start + @size_of_buf.
The worst is @disk_start.
The real meaning of it is the file offset of the full decompressed
extent.
This patch will rework the whole function by:
- Add a proper comment with ASCII art to explain the parameter list
- Rework parameter list
The old @buf_start is renamed to @decompressed, to show how many bytes
are already decompressed inside the full decompressed extent.
The old @total_out is replaced by @buf_len, which is the decompressed
data size.
For old @disk_start and @bio, just pass @compressed_bio in.
- Use single main cursor
The main cursor will be @cur_file_offset, to show what's the current
file offset.
Other helper variables will be declared inside the main loop, and only
minimal amount of helper variables:
* offset_inside_decompressed_buf: The only real helper
* copy_start_file_offset: File offset we start memcpy
* bvec_file_offset: File offset of current bvec
Even with all these extensive comments, the final function is still
smaller than the original function, which is definitely a win.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As we don't use highmem pages anymore, drop the kmap/kunmap. The kmap is
simply page_address and kunmap is a no-op.
Signed-off-by: David Sterba <dsterba@suse.com>
The highmem flag is used for allocating pages for compression and for
raid56 pages. The high memory makes sense on 32bit systems but is not
without problems. On 64bit system's it's just another layer of wrappers.
The time the pages are allocated for compression or raid56 is relatively
short (about a transaction commit), so the pages are not blocked
indefinitely. As the number of pages depends on the amount of data being
written/read, there's a theoretical problem. A fast device on a 32bit
system could use most of the low memory pool, while with the highmem
allocation that would not happen. This was possibly the original idea
long time ago, but nowadays we optimize for 64bit systems.
This patch removes all usage of the __GFP_HIGHMEM flag for page
allocation, the kmap/kunmap are still in place and will be removed in
followup patches. Remaining is masking out the bit in
alloc_extent_state and __lookup_free_space_inode, that can safely stay.
Signed-off-by: David Sterba <dsterba@suse.com>
Use a simple coccinelle script to help convert the most common
kmap()/kunmap() patterns to kmap_local_page()/kunmap_local().
Note that some kmaps which were caught by this script needed to be
handled by hand because of the strict unmapping order of kunmap_local()
so they are not included in this patch. But this script got us started.
There's another temp variable added for the final length write to the
first page so it does not interfere with cpage_out that is used for
mapping other pages.
The development of this patch was aided by the follow script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap and replace with kmap_local_page then mark kunmap
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
@ catch_all @
expression e, e2;
@@
(
-kmap(e)
+kmap_local_page(e)
)
...
(
-kunmap(...)
+kunmap_local()
)
// </smpl>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are many places where the pattern kmap/memcpy/kunmap occurs.
This pattern was lifted to the core common functions
memcpy_[to|from]_page().
Use these new functions to reduce the code, eliminate direct uses of
kmap, and leverage the new core functions use of kmap_local_page().
Also, there is 1 place where a kmap/memcpy is followed by an
optional memset. Here we leave the kmap open coded to avoid remapping
the page but use kmap_local_page() directly.
Development of this patch was aided by the coccinelle script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/memcpy/kunmap pattern and replace with memcpy*page calls
//
// NOTE: Offsets and other expressions may be more complex than what the script
// will automatically generate. Therefore a catchall rule is provided to find
// the pattern which then must be evaluated by hand.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:
//
// simple memcpy version
//
@ memcpy_rule1 @
expression page, T, F, B, Off;
identifier ptr;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
-memcpy(ptr + Off, F, B);
+memcpy_to_page(page, Off, F, B);
|
-memcpy(ptr, F, B);
+memcpy_to_page(page, 0, F, B);
|
-memcpy(T, ptr + Off, B);
+memcpy_from_page(T, page, Off, B);
|
-memcpy(T, ptr, B);
+memcpy_from_page(T, page, 0, B);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memcpy_rule1
@
identifier memcpy_rule1.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
//
// Some callers kmap without a temp pointer
//
@ memcpy_rule2 @
expression page, T, Off, F, B;
@@
<+...
(
-memcpy(kmap(page) + Off, F, B);
+memcpy_to_page(page, Off, F, B);
|
-memcpy(kmap(page), F, B);
+memcpy_to_page(page, 0, F, B);
|
-memcpy(T, kmap(page) + Off, B);
+memcpy_from_page(T, page, Off, B);
|
-memcpy(T, kmap(page), B);
+memcpy_from_page(T, page, 0, B);
)
...+>
-kunmap(page);
// No need for the ptr variable removal
//
// Catch all
//
@ memcpy_rule3 @
expression page;
expression GenTo, GenFrom, GenSize;
identifier ptr;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
//
// Some call sites have complex expressions within the memcpy
// match a catch all to be evaluated by hand.
//
-memcpy(GenTo, GenFrom, GenSize);
+memcpy_to_pageExtra(page, GenTo, GenFrom, GenSize);
+memcpy_from_pageExtra(GenTo, page, GenFrom, GenSize);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memcpy_rule3
@
identifier memcpy_rule3.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
// <smpl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace indirect calls to free_workspace by switch and calls to the
specific callbacks. This is mainly to get rid of the indirection due to
spectre vulnerability mitigations.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace indirect calls to alloc_workspace by switch and calls to the
specific callbacks. This is mainly to get rid of the indirection due to
spectre vulnerability mitigations.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to get_workspace, majority of the callbacks is trivial, we don't
gain anything by the indirection, so replace them by a switch function.
Trivial callback implementations use the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Majority of the callbacks is trivial, we don't gain anything by the
indirection, so replace them by a switch function.
ZLIB needs to adjust level in the callback and ZSTD workspace management
is complex, the rest is call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The indirect calls will be replaced by a switch in compression.c.
(Switch is faster than indirect calls with when Spectre mitigations are
enabled).
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace loop calling to all algos with a list of direct calls to the
cleanup manager callback. When that becomes trivial it is replaced by
direct call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the access to the workspace structures, we can look it up together
with the compression ops inside the workspace manager cleanup helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace loop calling to all algos with a list of direct calls to the
init manager callback. When that becomes trivial it is replaced by
direct call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the access to the workspace structures, we can look it up together
with the compression ops inside the workspace manager init helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a lot of indirection when the generic code calls into
algo-specific callbacks to reach the private workspace manager structure
and back to the generic code.
To simplify that, export the workspace manager for heuristic, LZO and
ZLIB, while ZSTD is going to use it's own manager.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The indirect calls bring some overhead due to spectre vulnerability
mitigations. The number of cases is small and below the threshold
(10-20) where indirect call would be better.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export compress_pages, decompress_bio and decompress callbacks for all
compression algos. The indirect calls will be replaced by a switch.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The set_level callbacks do not do anything special and can be replaced
by a helper that uses the levels defined in the tables.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The maximum and default levels do not change and can be defined
directly. The set_level callback was a temporary solution and will be
removed.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the only user of set_level() is zlib which sets an internal
workspace parameter. As level is now plumbed into get_workspace(), this
can be handled there rather than separately.
This repurposes set_level() to bound the level passed in so it can be
used when setting the mounts compression level and as well as verifying
the level before getting a workspace. The other benefit is this divides
the meaning of compress(0) and get_workspace(0). The former means we
want to use the default compression level of the compression type. The
latter means we can use any workspace available.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Zlib compression supports multiple levels, but doesn't require changing
in how a workspace itself is created and managed. Zstd introduces a
different memory requirement such that higher levels of compression
require more memory.
This requires changes in how the alloc()/get() methods work for zstd.
This pach plumbs compression level through the interface as a parameter
in preparation for zstd compression levels. This gives the compression
types opportunity to create/manage based on the compression level.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The previous patch added generic helpers for get_workspace() and
put_workspace(). Now, we can migrate ownership of the workspace_manager
to be in the compression type code as the compression code itself
doesn't care beyond being able to get a workspace. The init/cleanup and
get/put methods are abstracted so each compression algorithm can decide
how they want to manage their workspaces.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The typos accumulate over time so once in a while time they get fixed in
a large patch.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For inlined extent, we only have one segment, thus less things to check.
And further more, inlined extent always has the csum in its leaf header,
it's less probable to have corrupted data.
Anyway, still check header and segment header.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
James Harvey reported that some corrupted compressed extent data can
lead to various kernel memory corruption.
Such corrupted extent data belongs to inode with NODATASUM flags, thus
data csum won't help us detecting such bug.
If lucky enough, KASAN could catch it like:
BUG: KASAN: slab-out-of-bounds in lzo_decompress_bio+0x384/0x7a0 [btrfs]
Write of size 4096 at addr ffff8800606cb0f8 by task kworker/u16:0/2338
CPU: 3 PID: 2338 Comm: kworker/u16:0 Tainted: G O 4.17.0-rc5-custom+ #50
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
Call Trace:
dump_stack+0xc2/0x16b
print_address_description+0x6a/0x270
kasan_report+0x260/0x380
memcpy+0x34/0x50
lzo_decompress_bio+0x384/0x7a0 [btrfs]
end_compressed_bio_read+0x99f/0x10b0 [btrfs]
bio_endio+0x32e/0x640
normal_work_helper+0x15a/0xea0 [btrfs]
process_one_work+0x7e3/0x1470
worker_thread+0x1b0/0x1170
kthread+0x2db/0x390
ret_from_fork+0x22/0x40
...
The offending compressed data has the following info:
Header: length 32768 (looks completely valid)
Segment 0 Header: length 3472882419 (obviously out of bounds)
Then when handling segment 0, since it's over the current page, we need
the copy the compressed data to temporary buffer in workspace, then such
large size would trigger out-of-bounds memory access, screwing up the
whole kernel.
Fix it by adding extra checks on header and segment headers to ensure we
won't access out-of-bounds, and even checks the decompressed data won't
be out-of-bounds.
Reported-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Although it's not that complex, but such comment could still save
several minutes for newer reader/reviewer instead of inferring that from
the code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor wording updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
Preliminary support for setting compression level for zlib, the
following works:
$ mount -o compess=zlib # default
$ mount -o compess=zlib0 # same
$ mount -o compess=zlib9 # level 9, slower sync, less data
$ mount -o compess=zlib1 # level 1, faster sync, more data
$ mount -o remount,compress=zlib3 # level set by remount
The compress-force works the same as compress'. The level is visible in
the same format in /proc/mounts. Level set via file property does not
work yet.
Required patch: "btrfs: prepare for extensions in compression options"
Signed-off-by: David Sterba <dsterba@suse.com>
The compression workspace buffers are larger than a page so we use
vmalloc, unconditionally. This is not always necessary as there might be
contiguous memory available.
Let's use the kvmalloc helpers that will try kmalloc first and fallback
to vmalloc. For that they require GFP_KERNEL flags. As we now have the
alloc_workspace calls protected by memalloc_nofs in the critical
contexts, we can safely use GFP_KERNEL.
Signed-off-by: David Sterba <dsterba@suse.com>
As alloc_workspace is now protected by memalloc_nofs where needed,
we can switch the kmalloc to use GFP_KERNEL.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Logic already skips if compression makes data bigger, let's sync lzo
with zlib and also return error if compressed size is equal to
input size.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Fix copy paste typo in debug message for lzo.c, lzo is not deflate.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct compressed_bio pointer can be used instead.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of max_out can be calculated from the parameters passed to the
compressors, which is number of pages and the page size, and we don't
have to needlessly pass it around.
Signed-off-by: David Sterba <dsterba@suse.com>
