Activating KCSAN on a 32 bits architecture leads to the following
link-time failure:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_load':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_load_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_store':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_store_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_exchange':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_add':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_add_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_sub':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_sub_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_and':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_and_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_or':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_or_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_xor':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_xor_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_nand':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_nand_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_strong':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_weak':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_val':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
32 bits architectures don't have 64 bits atomic builtins. Only
include DEFINE_TSAN_ATOMIC_OPS(64) on 64 bits architectures.
Fixes: 0f8ad5f2e9 ("kcsan: Add support for atomic builtins")
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9c6afc28d0855240171a4e0ad9ffcdb9d07fceb.1683892665.git.christophe.leroy@csgroup.eu
Haibo Li reported:
| Unable to handle kernel paging request at virtual address
| ffffff802a0d8d7171
| Mem abort info⭕
| ESR = 0x9600002121
| EC = 0x25: DABT (current EL), IL = 32 bitsts
| SET = 0, FnV = 0 0
| EA = 0, S1PTW = 0 0
| FSC = 0x21: alignment fault
| Data abort info⭕
| ISV = 0, ISS = 0x0000002121
| CM = 0, WnR = 0 0
| swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000002835200000
| [ffffff802a0d8d71] pgd=180000005fbf9003, p4d=180000005fbf9003,
| pud=180000005fbf9003, pmd=180000005fbe8003, pte=006800002a0d8707
| Internal error: Oops: 96000021 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 2 PID: 45 Comm: kworker/u8:2 Not tainted
| 5.15.78-android13-8-g63561175bbda-dirty #1
| ...
| pc : kcsan_setup_watchpoint+0x26c/0x6bc
| lr : kcsan_setup_watchpoint+0x88/0x6bc
| sp : ffffffc00ab4b7f0
| x29: ffffffc00ab4b800 x28: ffffff80294fe588 x27: 0000000000000001
| x26: 0000000000000019 x25: 0000000000000001 x24: ffffff80294fdb80
| x23: 0000000000000000 x22: ffffffc00a70fb68 x21: ffffff802a0d8d71
| x20: 0000000000000002 x19: 0000000000000000 x18: ffffffc00a9bd060
| x17: 0000000000000001 x16: 0000000000000000 x15: ffffffc00a59f000
| x14: 0000000000000001 x13: 0000000000000000 x12: ffffffc00a70faa0
| x11: 00000000aaaaaaab x10: 0000000000000054 x9 : ffffffc00839adf8
| x8 : ffffffc009b4cf00 x7 : 0000000000000000 x6 : 0000000000000007
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffc00a70fb70
| x2 : 0005ff802a0d8d71 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| kcsan_setup_watchpoint+0x26c/0x6bc
| __tsan_read2+0x1f0/0x234
| inflate_fast+0x498/0x750
| zlib_inflate+0x1304/0x2384
| __gunzip+0x3a0/0x45c
| gunzip+0x20/0x30
| unpack_to_rootfs+0x2a8/0x3fc
| do_populate_rootfs+0xe8/0x11c
| async_run_entry_fn+0x58/0x1bc
| process_one_work+0x3ec/0x738
| worker_thread+0x4c4/0x838
| kthread+0x20c/0x258
| ret_from_fork+0x10/0x20
| Code: b8bfc2a8 2a0803f7 14000007 d503249f (78bfc2a8) )
| ---[ end trace 613a943cb0a572b6 ]-----
The reason for this is that on certain arm64 configuration since
e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire when
CONFIG_LTO=y"), READ_ONCE() may be promoted to a full atomic acquire
instruction which cannot be used on unaligned addresses.
Fix it by avoiding READ_ONCE() in read_instrumented_memory(), and simply
forcing the compiler to do the required access by casting to the
appropriate volatile type. In terms of generated code this currently
only affects architectures that do not use the default READ_ONCE()
implementation.
The only downside is that we are not guaranteed atomicity of the access
itself, although on most architectures a plain load up to machine word
size should still be atomic (a fact the default READ_ONCE() still relies
on itself).
Reported-by: Haibo Li <haibo.li@mediatek.com>
Tested-by: Haibo Li <haibo.li@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
With Clang version 16+, -fsanitize=thread will turn
memcpy/memset/memmove calls in instrumented functions into
__tsan_memcpy/__tsan_memset/__tsan_memmove calls respectively.
Add these functions to the core KCSAN runtime, so that we (a) catch data
races with mem* functions, and (b) won't run into linker errors with
such newer compilers.
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Nested contexts, such as nested interrupts or scheduler code, share the
same kcsan_ctx. When such a nested context reads an inconsistent
reorder_access due to an interrupt during set_reorder_access(), we can
observe the following warning:
| ------------[ cut here ]------------
| Cannot find frame for torture_random kernel/torture.c:456 in stack trace
| WARNING: CPU: 13 PID: 147 at kernel/kcsan/report.c:343 replace_stack_entry kernel/kcsan/report.c:343
| ...
| Call Trace:
| <TASK>
| sanitize_stack_entries kernel/kcsan/report.c:351 [inline]
| print_report kernel/kcsan/report.c:409
| kcsan_report_known_origin kernel/kcsan/report.c:693
| kcsan_setup_watchpoint kernel/kcsan/core.c:658
| rcutorture_one_extend kernel/rcu/rcutorture.c:1475
| rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
| ...
| </TASK>
| ---[ end trace ee5299cb933115f5 ]---
| ==================================================================
| BUG: KCSAN: data-race in _raw_spin_lock_irqsave / rcutorture_one_extend
|
| write (reordered) to 0xffffffff8c93b300 of 8 bytes by task 154 on cpu 12:
| queued_spin_lock include/asm-generic/qspinlock.h:80 [inline]
| do_raw_spin_lock include/linux/spinlock.h:185 [inline]
| __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:111 [inline]
| _raw_spin_lock_irqsave kernel/locking/spinlock.c:162
| try_to_wake_up kernel/sched/core.c:4003
| sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1097
| asm_sysvec_apic_timer_interrupt arch/x86/include/asm/idtentry.h:638
| set_reorder_access kernel/kcsan/core.c:416 [inline] <-- inconsistent reorder_access
| kcsan_setup_watchpoint kernel/kcsan/core.c:693
| rcutorture_one_extend kernel/rcu/rcutorture.c:1475
| rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
| rcu_torture_one_read kernel/rcu/rcutorture.c:1600
| rcu_torture_reader kernel/rcu/rcutorture.c:1692
| kthread kernel/kthread.c:327
| ret_from_fork arch/x86/entry/entry_64.S:295
|
| read to 0xffffffff8c93b300 of 8 bytes by task 147 on cpu 13:
| rcutorture_one_extend kernel/rcu/rcutorture.c:1475
| rcutorture_loop_extend kernel/rcu/rcutorture.c:1558 [inline]
| ...
The warning is telling us that there was a data race which KCSAN wants
to report, but the function where the original access (that is now
reordered) happened cannot be found in the stack trace, which prevents
KCSAN from generating the right stack trace. The stack trace of "write
(reordered)" now only shows where the access was reordered to, but
should instead show the stack trace of the original write, with a final
line saying "reordered to".
At the point where set_reorder_access() is interrupted, it just set
reorder_access->ptr and size, at which point size is non-zero. This is
sufficient (if ctx->disable_scoped is zero) for further accesses from
nested contexts to perform checking of this reorder_access.
That then happened in _raw_spin_lock_irqsave(), which is called by
scheduler code. However, since reorder_access->ip is still stale (ptr
and size belong to a different ip not yet set) this finally leads to
replace_stack_entry() not finding the frame in reorder_access->ip and
generating the above warning.
Fix it by ensuring that a nested context cannot access reorder_access
while we update it in set_reorder_access(): set ctx->disable_scoped for
the duration that reorder_access is updated, which effectively locks
reorder_access and prevents concurrent use by nested contexts. Note,
set_reorder_access() can do the update only if disabled_scoped is zero
on entry, and must therefore set disable_scoped back to non-zero after
the initial check in set_reorder_access().
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add the core memory barrier instrumentation functions. These invalidate
the current in-flight reordered access based on the rules for the
respective barrier types and in-flight access type.
To obtain barrier instrumentation that can be disabled via __no_kcsan
with appropriate compiler-support (and not just with objtool help),
barrier instrumentation repurposes __atomic_signal_fence(), instead of
inserting explicit calls. Crucially, __atomic_signal_fence() normally
does not map to any real instructions, but is still intercepted by
fsanitize=thread. As a result, like any other instrumentation done by
the compiler, barrier instrumentation can be disabled with __no_kcsan.
Unfortunately Clang and GCC currently differ in their __no_kcsan aka
__no_sanitize_thread behaviour with respect to builtin atomics (and
__tsan_func_{entry,exit}) instrumentation. This is already reflected in
Kconfig.kcsan's dependencies for KCSAN_WEAK_MEMORY. A later change will
introduce support for newer versions of Clang that can implement
__no_kcsan to also remove the additional instrumentation introduced by
KCSAN_WEAK_MEMORY.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add support for modeling a subset of weak memory, which will enable
detection of a subset of data races due to missing memory barriers.
KCSAN's approach to detecting missing memory barriers is based on
modeling access reordering, and enabled if `CONFIG_KCSAN_WEAK_MEMORY=y`,
which depends on `CONFIG_KCSAN_STRICT=y`. The feature can be enabled or
disabled at boot and runtime via the `kcsan.weak_memory` boot parameter.
Each memory access for which a watchpoint is set up, is also selected
for simulated reordering within the scope of its function (at most 1
in-flight access).
We are limited to modeling the effects of "buffering" (delaying the
access), since the runtime cannot "prefetch" accesses (therefore no
acquire modeling). Once an access has been selected for reordering, it
is checked along every other access until the end of the function scope.
If an appropriate memory barrier is encountered, the access will no
longer be considered for reordering.
When the result of a memory operation should be ordered by a barrier,
KCSAN can then detect data races where the conflict only occurs as a
result of a missing barrier due to reordering accesses.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Avoid checking scoped accesses from nested contexts (such as nested
interrupts or in scheduler code) which share the same kcsan_ctx.
This is to avoid detecting false positive races of accesses in the same
thread with currently scoped accesses: consider setting up a watchpoint
for a non-scoped (normal) access that also "conflicts" with a current
scoped access. In a nested interrupt (or in the scheduler), which shares
the same kcsan_ctx, we cannot check scoped accesses set up in the parent
context -- simply ignore them in this case.
With the introduction of kcsan_ctx::disable_scoped, we can also clean up
kcsan_check_scoped_accesses()'s recursion guard, and do not need to
modify the list's prev pointer.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
They are implicitly zero-initialized, remove explicit initialization.
It keeps the upcoming additions to kcsan_ctx consistent with the rest.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Factor out the switch statement reading instrumented memory into a
helper read_instrumented_memory().
No functional change.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is clearer if ctx is at the start of the function argument list;
it'll be more consistent when adding functions with varying arguments
but all requiring ctx.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Save the instruction pointer for scoped accesses, so that it becomes
possible for the reporting code to construct more accurate stack traces
that will show the start of the scope.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add the ability to pass an explicitly set instruction pointer of access
from check_access() all the way through to reporting.
In preparation of using it in reporting.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Show a brief message if KCSAN is strict or non-strict, and if non-strict
also say that CONFIG_KCSAN_STRICT=y can be used to see all data races.
This is to hint to users of KCSAN who blindly use the default config
that their configuration might miss data races of interest.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Rework atomic.h into permissive.h to better reflect its purpose, and
introduce kcsan_ignore_address() and kcsan_ignore_data_race().
Introduce CONFIG_KCSAN_PERMISSIVE and update the stub functions in
preparation for subsequent changes.
As before, developers who choose to use KCSAN in "strict" mode will see
all data races and are not affected. Furthermore, by relying on the
value-change filter logic for kcsan_ignore_data_race(), even if the
permissive rules are enabled, the opt-outs in report.c:skip_report()
override them (such as for RCU-related functions by default).
The option CONFIG_KCSAN_PERMISSIVE is disabled by default, so that the
documented default behaviour of KCSAN does not change. Instead, like
CONFIG_KCSAN_IGNORE_ATOMICS, the option needs to be explicitly opted in.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There are a number get_ctx() calls that are close to each other, which
results in poor codegen (repeated preempt_count loads).
Specifically in kcsan_found_watchpoint() (even though it's a slow-path)
it is beneficial to keep the race-window small until the watchpoint has
actually been consumed to avoid missed opportunities to report a race.
Let's clean it up a bit before we add more code in
kcsan_found_watchpoint().
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
By this point CONFIG_KCSAN_DEBUG is pretty useless, as the system just
isn't usable with it due to spamming console (I imagine a randconfig
test robot will run into this sooner or later). Remove it.
Back in 2019 I used it occasionally to record traces of watchpoints and
verify the encoding is correct, but these days we have proper tests. If
something similar is needed in future, just add it back ad-hoc.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When a thread detects that a memory location was modified without its
watchpoint being hit, the report notes that a change was detected, but
does not provide concrete values for the change. Knowing the concrete
values can be very helpful in tracking down any racy writers (e.g. as
specific values may only be written in some portions of code, or under
certain conditions).
When we detect a modification, let's report the concrete old/new values,
along with the access's mask of relevant bits (and which relevant bits
were modified). This can make it easier to identify potential racy
writers. As the snapshots are at most 8 bytes, we can only report values
for acceses up to this size, but this appears to cater for the common
case.
When we detect a race via a watchpoint, we may or may not have concrete
values for the modification. To be helpful, let's attempt to log them
when we do as they can be ignored where irrelevant.
The resulting reports appears as follows, with values zero-padded to the
access width:
| ==================================================================
| BUG: KCSAN: data-race in el0_svc_common+0x34/0x25c arch/arm64/kernel/syscall.c:96
|
| race at unknown origin, with read to 0xffff00007ae6aa00 of 8 bytes by task 223 on cpu 1:
| el0_svc_common+0x34/0x25c arch/arm64/kernel/syscall.c:96
| do_el0_svc+0x48/0xec arch/arm64/kernel/syscall.c:178
| el0_svc arch/arm64/kernel/entry-common.c:226 [inline]
| el0_sync_handler+0x1a4/0x390 arch/arm64/kernel/entry-common.c:236
| el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:674
|
| value changed: 0x0000000000000000 -> 0x0000000000000002
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 PID: 223 Comm: syz-executor.1 Not tainted 5.8.0-rc3-00094-ga73f923ecc8e-dirty #3
| Hardware name: linux,dummy-virt (DT)
| ==================================================================
If an access mask is set, it is shown underneath the "value changed"
line as "bits changed: 0x<bits changed> with mask 0x<non-zero mask>".
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[ elver@google.com: align "value changed" and "bits changed" lines,
which required massaging the message; do not print bits+mask if no
mask set. ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently kcsan_report() is used to handle three distinct cases:
* The caller hit a watchpoint when attempting an access. Some
information regarding the caller and access are recorded, but no
output is produced.
* A caller which previously setup a watchpoint detected that the
watchpoint has been hit, and possibly detected a change to the
location in memory being watched. This may result in output reporting
the interaction between this caller and the caller which hit the
watchpoint.
* A caller detected a change to a modification to a memory location
which wasn't detected by a watchpoint, for which there is no
information on the other thread. This may result in output reporting
the unexpected change.
... depending on the specific case the caller has distinct pieces of
information available, but the prototype of kcsan_report() has to handle
all three cases. This means that in some cases we pass redundant
information, and in others we don't pass all the information we could
pass. This also means that the report code has to demux these three
cases.
So that we can pass some additional information while also simplifying
the callers and report code, add separate kcsan_report_*() functions for
the distinct cases, updating callers accordingly. As the watchpoint_idx
is unused in the case of kcsan_report_unknown_origin(), this passes a
dummy value into kcsan_report(). Subsequent patches will refactor the
report code to avoid this.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[ elver@google.com: try to make kcsan_report_*() names more descriptive ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In kcsan_setup_watchpoint() we store snapshots of a watched value into a
union of u8/u16/u32/u64 sized fields, modify this in place using a
consistent field, then later check for any changes via the u64 field.
We can achieve the safe effect more simply by always treating the field
as a u64, as smaller values will be zero-extended. As the values are
zero-extended, we don't need to truncate the access_mask when we apply
it, and can always apply the full 64-bit access_mask to the 64-bit
value.
Finally, we can store the two snapshots and calculated difference
separately, which makes the code a little easier to read, and will
permit reporting the old/new values in subsequent patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds missing license and/or copyright headers for KCSAN source files.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 56348560d4 ("debugfs: do not attempt to create a new file
before the filesystem is initalized") forbids creating new debugfs files
until debugfs is fully initialized. This means that KCSAN's debugfs
file creation, which happened at the end of __init(), no longer works.
And was apparently never supposed to work!
However, there is no reason to create KCSAN's debugfs file so early.
This commit therefore moves its creation to a late_initcall() callback.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable <stable@vger.kernel.org>
Fixes: 56348560d4 ("debugfs: do not attempt to create a new file before the filesystem is initalized")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Rewrite kcsan_prandom_u32_max() to not depend on code that might be
instrumented, removing any dependency on lib/random32.c. The rewrite
implements a simple linear congruential generator, that is sufficient
for our purposes (for udelay() and skip_watch counter randomness).
The initial motivation for this was to allow enabling KCSAN for
kernel/sched (remove KCSAN_SANITIZE := n from kernel/sched/Makefile),
with CONFIG_DEBUG_PREEMPT=y. Without this change, we could observe
recursion:
check_access() [via instrumentation]
kcsan_setup_watchpoint()
reset_kcsan_skip()
kcsan_prandom_u32_max()
get_cpu_var()
preempt_disable()
preempt_count_add() [in kernel/sched/core.c]
check_access() [via instrumentation]
Note, while this currently does not affect an unmodified kernel, it'd be
good to keep a KCSAN kernel working when KCSAN_SANITIZE := n is removed
from kernel/sched/Makefile to permit testing scheduler code with KCSAN
if desired.
Fixes: cd290ec246 ("kcsan: Use tracing-safe version of prandom")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the core runtime, we must minimize any calls to external library
functions to avoid any kind of recursion. This can happen even though
instrumentation is disabled for called functions, but tracing is
enabled.
Most recently, prandom_u32() added a tracepoint, which can cause
problems for KCSAN even if the rcuidle variant is used. For example:
kcsan -> prandom_u32() -> trace_prandom_u32_rcuidle ->
srcu_read_lock_notrace -> __srcu_read_lock -> kcsan ...
While we could disable KCSAN in kcsan_setup_watchpoint(), this does not
solve other unexpected behaviour we may get due recursing into functions
that may not be tolerant to such recursion:
__srcu_read_lock -> kcsan -> ... -> __srcu_read_lock
Therefore, switch to using prandom_u32_state(), which is uninstrumented,
and does not have a tracepoint.
Link: https://lkml.kernel.org/r/20200821063043.1949509-1-elver@google.com
Link: https://lkml.kernel.org/r/20200820172046.GA177701@elver.google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Remove kcsan_counter_inc/dec() functions, as they perform no other
logic, and are no longer needed.
This avoids several calls in kcsan_setup_watchpoint() and
kcsan_found_watchpoint(), as well as lets the compiler warn us about
potential out-of-bounds accesses as the array's size is known at all
usage sites at compile-time.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Show a message in the kernel log if KCSAN was enabled early.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add missing CONFIG_KCSAN_IGNORE_ATOMICS checks for the builtin atomics
instrumentation.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For compound instrumentation and assert accesses, skew the watchpoint
delay to be longer if randomized. This is useful to improve race
detection for such accesses.
For compound accesses we should increase the delay as we've aggregated
both read and write instrumentation. By giving up 1 call into the
runtime, we're less likely to set up a watchpoint and thus less likely
to detect a race. We can balance this by increasing the watchpoint
delay.
For assert accesses, we know these are of increased interest, and we
wish to increase our chances of detecting races for such checks.
Note that, kcsan_udelay_{task,interrupt} define the upper bound delays.
When randomized, delays are uniformly distributed between [0, delay].
Skewing the delay does not break this promise as long as the defined
upper bounds are still adhered to. The current skew results in delays
uniformly distributed between [delay/2, delay].
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add support for compounded read-write instrumentation if supported by
the compiler. Adds the necessary instrumentation functions, and a new
type which is used to generate a more descriptive report.
Furthermore, such compounded memory access instrumentation is excluded
from the "assume aligned writes up to word size are atomic" rule,
because we cannot assume that the compiler emits code that is atomic for
compound ops.
LLVM/Clang added support for the feature in:
785d41a261
The new instrumentation is emitted for sets of memory accesses in the
same basic block to the same address with at least one read appearing
before a write. These typically result from compound operations such as
++, --, +=, -=, |=, &=, etc. but also equivalent forms such as "var =
var + 1". Where the compiler determines that it is equivalent to emit a
call to a single __tsan_read_write instead of separate __tsan_read and
__tsan_write, we can then benefit from improved performance and better
reporting for such access patterns.
The new reports now show that the ops are both reads and writes, for
example:
read-write to 0xffffffff90548a38 of 8 bytes by task 143 on cpu 3:
test_kernel_rmw_array+0x45/0xa0
access_thread+0x71/0xb0
kthread+0x21e/0x240
ret_from_fork+0x22/0x30
read-write to 0xffffffff90548a38 of 8 bytes by task 144 on cpu 2:
test_kernel_rmw_array+0x45/0xa0
access_thread+0x71/0xb0
kthread+0x21e/0x240
ret_from_fork+0x22/0x30
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some architectures (currently e.g. s390 partially) implement atomics
using the compiler's atomic builtins (__atomic_*, __sync_*). To support
enabling KCSAN on such architectures in future, or support experimental
use of these builtins, implement support for them.
We should also avoid breaking KCSAN kernels due to use (accidental or
otherwise) of atomic builtins in drivers, as has happened in the past:
https://lkml.kernel.org/r/5231d2c0-41d9-6721-e15f-a7eedf3ce69e@infradead.org
The instrumentation is subtly different from regular reads/writes: TSAN
instrumentation replaces the use of atomic builtins with a call into the
runtime, and the runtime's job is to also execute the desired atomic
operation. We rely on the __atomic_* compiler builtins, available with
all KCSAN-supported compilers, to implement each TSAN atomic
instrumentation function.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull v5.9 KCSAN bits from Paul E. McKenney.
Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To improve the general usefulness of the IRQ state trace events with
KCSAN enabled, save and restore the trace information when entering and
exiting the KCSAN runtime as well as when generating a KCSAN report.
Without this, reporting the IRQ trace events (whether via a KCSAN report
or outside of KCSAN via a lockdep report) is rather useless due to
continuously being touched by KCSAN. This is because if KCSAN is
enabled, every instrumented memory access causes changes to IRQ trace
events (either by KCSAN disabling/enabling interrupts or taking
report_lock when generating a report).
Before "lockdep: Prepare for NMI IRQ state tracking", KCSAN avoided
touching the IRQ trace events via raw_local_irq_save/restore() and
lockdep_off/on().
Fixes: 248591f5d2 ("kcsan: Make KCSAN compatible with new IRQ state tracking")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200729110916.3920464-2-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new IRQ state tracking code does not honor lockdep_off(), and as
such we should again permit tracing by using non-raw functions in
core.c. Update the lockdep_off() comment in report.c, to reflect the
fact there is still a potential risk of deadlock due to using printk()
from scheduler code.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200624113246.GA170324@elver.google.com
The functions here should not be forward declared for explicit use
elsewhere in the kernel, as they should only be emitted by the compiler
due to sanitizer instrumentation. Add forward declarations a line above
their definition to shut up warnings in W=1 builds.
Link: https://lkml.kernel.org/r/202006060103.jSCpnV1g%lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the kernel, the "volatile" keyword is used in various concurrent
contexts, whether in low-level synchronization primitives or for
legacy reasons. If supported by the compiler, it will be assumed
that aligned volatile accesses up to sizeof(long long) (matching
compiletime_assert_rwonce_type()) are atomic.
Recent versions of Clang [1] (GCC tentative [2]) can instrument
volatile accesses differently. Add the option (required) to enable the
instrumentation, and provide the necessary runtime functions. None of
the updated compilers are widely available yet (Clang 11 will be the
first release to support the feature).
[1] 5a2c31116f
[2] https://gcc.gnu.org/pipermail/gcc-patches/2020-April/544452.html
This change allows removing of any explicit checks in primitives such as
READ_ONCE() and WRITE_ONCE().
[ bp: Massage commit message a bit. ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-4-elver@google.com
The __kcsan_{enable,disable}_current() variants only call into KCSAN if
KCSAN is enabled for the current compilation unit. Note: This is
typically not what we want, as we usually want to ensure that even calls
into other functions still have KCSAN disabled.
These variants may safely be used in header files that are shared
between regular kernel code and code that does not link the KCSAN
runtime.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This adds support for scoped accesses, where the memory range is checked
for the duration of the scope. The feature is implemented by inserting
the relevant access information into a list of scoped accesses for
the current execution context, which are then checked (until removed)
on every call (through instrumentation) into the KCSAN runtime.
An alternative, more complex, implementation could set up a watchpoint for
the scoped access, and keep the watchpoint set up. This, however, would
require first exposing a handle to the watchpoint, as well as dealing
with cases such as accesses by the same thread while the watchpoint is
still set up (and several more cases). It is also doubtful if this would
provide any benefit, since the majority of delay where the watchpoint
is set up is likely due to the injected delays by KCSAN. Therefore,
the implementation in this patch is simpler and avoids hurting KCSAN's
main use-case (normal data race detection); it also implicitly increases
scoped-access race-detection-ability due to increased probability of
setting up watchpoints by repeatedly calling __kcsan_check_access()
throughout the scope of the access.
The implementation required adding an additional conditional branch to
the fast-path. However, the microbenchmark showed a *speedup* of ~5%
on the fast-path. This appears to be due to subtly improved codegen by
GCC from moving get_ctx() and associated load of preempt_count earlier.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To avoid deadlock in case watchers can be interrupted, we need to ensure
that producers of the struct other_info can never be blocked by an
unrelated consumer. (Likely to occur with KCSAN_INTERRUPT_WATCHER.)
There are several cases that can lead to this scenario, for example:
1. A watchpoint A was set up by task T1, but interrupted by
interrupt I1. Some other thread (task or interrupt) finds
watchpoint A consumes it, and sets other_info. Then I1 also
finds some unrelated watchpoint B, consumes it, but is blocked
because other_info is in use. T1 cannot consume other_info
because I1 never returns -> deadlock.
2. A watchpoint A was set up by task T1, but interrupted by
interrupt I1, which also sets up a watchpoint B. Some other
thread finds watchpoint A, and consumes it and sets up
other_info with its information. Similarly some other thread
finds watchpoint B and consumes it, but is then blocked because
other_info is in use. When I1 continues it sees its watchpoint
was consumed, and that it must wait for other_info, which
currently contains information to be consumed by T1. However, T1
cannot unblock other_info because I1 never returns -> deadlock.
To avoid this, we need to ensure that producers of struct other_info
always have a usable other_info entry. This is obviously not the case
with only a single instance of struct other_info, as concurrent
producers must wait for the entry to be released by some consumer (which
may be locked up as illustrated above).
While it would be nice if producers could simply call kmalloc() and
append their instance of struct other_info to a list, we are very
limited in this code path: since KCSAN can instrument the allocators
themselves, calling kmalloc() could lead to deadlock or corrupted
allocator state.
Since producers of the struct other_info will always succeed at
try_consume_watchpoint(), preceding the call into kcsan_report(), we
know that the particular watchpoint slot cannot simply be reused or
consumed by another potential other_info producer. If we move removal of
a watchpoint after reporting (by the consumer of struct other_info), we
can see a consumed watchpoint as a held lock on elements of other_info,
if we create a one-to-one mapping of a watchpoint to an other_info
element.
Therefore, the simplest solution is to create an array of struct
other_info that is as large as the watchpoints array in core.c, and pass
the watchpoint index to kcsan_report() for producers and consumers, and
change watchpoints to be removed after reporting is done.
With a default config on a 64-bit system, the array other_infos consumes
~37KiB. For most systems today this is not a problem. On smaller memory
constrained systems, the config value CONFIG_KCSAN_NUM_WATCHPOINTS can
be reduced appropriately.
Overall, this change is a simplification of the prepare_report() code,
and makes some of the checks (such as checking if at least one access is
a write) redundant.
Tested:
$ tools/testing/selftests/rcutorture/bin/kvm.sh \
--cpus 12 --duration 10 --kconfig "CONFIG_DEBUG_INFO=y \
CONFIG_KCSAN=y CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n \
CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n \
CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000 CONFIG_KCSAN_VERBOSE=y \
CONFIG_KCSAN_INTERRUPT_WATCHER=y CONFIG_PROVE_LOCKING=y" \
--configs TREE03
=> No longer hangs and runs to completion as expected.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Improve readability by introducing access_info and other_info structs,
and in preparation of the following commit in this series replaces the
single instance of other_info with an array of size 1.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add volatile current->state to list of implicitly atomic accesses. This
is in preparation to eventually enable KCSAN on kernel/sched (which
currently still has KCSAN_SANITIZE := n).
Since accesses that match the special check in atomic.h are rare, it
makes more sense to move this check to the slow-path, avoiding the
additional compare in the fast-path. With the microbenchmark, a speedup
of ~6% is measured.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds CONFIG_KCSAN_VERBOSE to optionally enable more verbose reports.
Currently information about the reporting task's held locks and IRQ
trace events are shown, if they are enabled.
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add option to allow interrupts while a watchpoint is set up. This can be
enabled either via CONFIG_KCSAN_INTERRUPT_WATCHER or via the boot
parameter 'kcsan.interrupt_watcher=1'.
Note that, currently not all safe per-CPU access primitives and patterns
are accounted for, which could result in false positives. For example,
asm-generic/percpu.h uses plain operations, which by default are
instrumented. On interrupts and subsequent accesses to the same
variable, KCSAN would currently report a data race with this option.
Therefore, this option should currently remain disabled by default, but
may be enabled for specific test scenarios.
To avoid new warnings, changes all uses of smp_processor_id() to use the
raw version (as already done in kcsan_found_watchpoint()). The exact SMP
processor id is for informational purposes in the report, and
correctness is not affected.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When setting up an access mask with kcsan_set_access_mask(), KCSAN will
only report races if concurrent changes to bits set in access_mask are
observed. Conveying access_mask via a separate call avoids introducing
overhead in the common-case fast-path.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduces kcsan_value_change type, which explicitly points out if we
either observed a value-change (TRUE), or we could not observe one but
cannot rule out a value-change happened (MAYBE). The MAYBE state can
either be reported or not, depending on configuration preferences.
A follow-up patch introduces the FALSE state, which should never be
reported.
No functional change intended.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds early_boot, udelay_{task,interrupt}, and skip_watch as module
params. The latter parameters are useful to modify at runtime to tune
KCSAN's performance on new systems. This will also permit auto-tuning
these parameters to maximize overall system performance and KCSAN's race
detection ability.
None of the parameters are used in the fast-path and referring to them
via static variables instead of CONFIG constants will not affect
performance.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Qian Cai <cai@lca.pw>
The KCSAN_ACCESS_ASSERT access type may be used to introduce dummy reads
and writes to assert certain properties of concurrent code, where bugs
could not be detected as normal data races.
For example, a variable that is only meant to be written by a single
CPU, but may be read (without locking) by other CPUs must still be
marked properly to avoid data races. However, concurrent writes,
regardless if WRITE_ONCE() or not, would be a bug. Using
kcsan_check_access(&x, sizeof(x), KCSAN_ACCESS_ASSERT) would allow
catching such bugs.
To support KCSAN_ACCESS_ASSERT the following notable changes were made:
* If an access is of type KCSAN_ASSERT_ACCESS, disable various filters
that only apply to data races, so that all races that KCSAN observes are
reported.
* Bug reports that involve an ASSERT access type will be reported as
"KCSAN: assert: race in ..." instead of "data-race"; this will help
more easily distinguish them.
* Update a few comments to just mention 'races' where we do not always
mean pure data races.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instrumentation of arbitrary memory-copy functions, such as user-copies,
may be called with size of 0, which could lead to false positives.
To avoid this, add a comparison in check_access() for size==0, which
will be optimized out for constant sized instrumentation
(__tsan_{read,write}N), and therefore not affect the common-case
fast-path.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds option KCSAN_ASSUME_PLAIN_WRITES_ATOMIC. If enabled, plain
aligned writes up to word size are assumed to be atomic, and also not
subject to other unsafe compiler optimizations resulting in data races.
This option has been enabled by default to reflect current kernel-wide
preferences.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We must avoid any recursion into lockdep if KCSAN is enabled on utilities
used by lockdep. One manifestation of this is corruption of lockdep's
IRQ trace state (if TRACE_IRQFLAGS), resulting in spurious warnings
(see below). This commit fixes this by:
1. Using raw_local_irq{save,restore} in kcsan_setup_watchpoint().
2. Disabling lockdep in kcsan_report().
Tested with:
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
This fix eliminates spurious warnings such as the following one:
WARNING: CPU: 0 PID: 2 at kernel/locking/lockdep.c:4406 check_flags.part.0+0x101/0x220
Modules linked in:
CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.5.0-rc1+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:check_flags.part.0+0x101/0x220
<snip>
Call Trace:
lock_is_held_type+0x69/0x150
freezer_fork+0x20b/0x370
cgroup_post_fork+0x2c9/0x5c0
copy_process+0x2675/0x3b40
_do_fork+0xbe/0xa30
? _raw_spin_unlock_irqrestore+0x40/0x50
? match_held_lock+0x56/0x250
? kthread_park+0xf0/0xf0
kernel_thread+0xa6/0xd0
? kthread_park+0xf0/0xf0
kthreadd+0x321/0x3d0
? kthread_create_on_cpu+0x130/0x130
ret_from_fork+0x3a/0x50
irq event stamp: 64
hardirqs last enabled at (63): [<ffffffff9a7995d0>] _raw_spin_unlock_irqrestore+0x40/0x50
hardirqs last disabled at (64): [<ffffffff992a96d2>] kcsan_setup_watchpoint+0x92/0x460
softirqs last enabled at (32): [<ffffffff990489b8>] fpu__copy+0xe8/0x470
softirqs last disabled at (30): [<ffffffff99048939>] fpu__copy+0x69/0x470
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit adds access-type information to KCSAN's reports as follows:
"read", "read (marked)", "write", and "write (marked)".
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
