mirror of
https://github.com/torvalds/linux.git
synced 2024-11-21 19:41:42 +00:00
55db8eb456
43541 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
8cdf2d1903 |
RCU pull request for v6.13
SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the
expense of a higher latency write side with two (in the best case
of a snaphot of unused read-sides) or more RCU grace periods on
the update side which now assumes by itself the whole full
ordering guarantee against the LOCK/UNLOCK counters on both
indexes, along with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
FIXES:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on architectures
that have sane noinstr boundaries forbidding tracing on low-level
idle and kernel entry code. RCU-TASKS is enough on such configurations
because it involves an RCU grace period that waits for all idle
tasks to either schedule out voluntarily or enter into RCU
unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
RCUTORTURE:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
STALL:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node
locking otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and
waits for its promised cpusets interface.
- Remove leftover function declaration
-----BEGIN PGP SIGNATURE-----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=MWrw
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the expense
of a higher latency write side with two (in the best case of a
snaphot of unused read-sides) or more RCU grace periods on the
update side which now assumes by itself the whole full ordering
guarantee against the LOCK/UNLOCK counters on both indexes, along
with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
Fixes:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on
architectures that have sane noinstr boundaries forbidding tracing
on low-level idle and kernel entry code. RCU-TASKS is enough on
such configurations because it involves an RCU grace period that
waits for all idle tasks to either schedule out voluntarily or
enter into RCU unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
rcutorture:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
stall:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node locking
otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and waits
for its promised cpusets interface.
- Remove leftover function declaration"
* tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (42 commits)
rcuscale: Remove redundant WARN_ON_ONCE() splat
rcuscale: Do a proper cleanup if kfree_scale_init() fails
srcu: Unconditionally record srcu_read_lock_lite() in ->srcu_reader_flavor
srcu: Check for srcu_read_lock_lite() across all CPUs
srcu: Remove smp_mb() from srcu_read_unlock_lite()
rcutorture: Avoid printing cpu=-1 for no-fault RCU boost failure
rcuscale: Add guest_os_delay module parameter
refscale: Correct affinity check
torture: Add --no-affinity parameter to kvm.sh
rcu/nocb: Fix missed RCU barrier on deoffloading
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
rcu/srcutiny: don't return before reenabling preemption
rcu-tasks: Remove open-coded one-byte cmpxchg() emulation
doc: Remove kernel-parameters.txt entry for rcutorture.read_exit
rcutorture: Test start-poll primitives with interrupts disabled
rcu: Permit start_poll_synchronize_rcu*() with interrupts disabled
rcu: Allow short-circuiting of synchronize_rcu_tasks_rude()
doc: Add rcuog kthreads to kernel-per-CPU-kthreads.rst
rcu: Add rcuog kthreads to RCU_NOCB_CPU help text
rcu: Use the BITS_PER_LONG macro
...
|
||
|
Linus Torvalds
|
cd7fa3e1b0 |
Thermal control updates for 6.13-rc1
- Add support for thermal thresholds that can be added and removed from
user space via netlink along with a related library update (Daniel
Lezcano).
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki).
- Rearrange locking in the thermal core to use guards (Rafael Wysocki).
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table walks
in the thermal core (Rafael Wysocki).
- Fix and clean up the thermal testing facility code (Rafael Wysocki).
- Fix a Power Allocator thermal governor issue (ZhengShaobo).
-----BEGIN PGP SIGNATURE-----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=Pb3D
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are thermal core changes, including the addition of support for
temperature thresholds that can be set from user space, fixes related
to thermal zone initialization, suspend/resume and exit, locking
rework and rearrangement of the code handling thermal zone temperature
updates.
Specifics:
- Add support for thermal thresholds that can be added and removed
from user space via netlink along with a related library update
(Daniel Lezcano)
- Fix thermal zone initialization, suspend/resume and exit
synchronization issues (Rafael Wysocki)
- Rearrange locking in the thermal core to use guards (Rafael
Wysocki)
- Make the code handling thermal zone temperature updates use sorted
lists of trip points to reduce the number of trip points table
walks in the thermal core (Rafael Wysocki)
- Fix and clean up the thermal testing facility code (Rafael Wysocki)
- Fix a Power Allocator thermal governor issue (ZhengShaobo)"
* tag 'thermal-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (45 commits)
thermal: testing: Initialize some variables annoteded with _free()
thermal: testing: Use DEFINE_FREE() and __free() to simplify code
thermal: testing: Simplify tt_get_tt_zone()
thermal: gov_power_allocator: Granted power set to max when nobody request power
thermal: core: Relocate thermal zone initialization routine
thermal: core: Use trip lists for trip crossing detection
thermal: core: Eliminate thermal_zone_trip_down()
thermal: core: Relocate functions that update trip points
thermal: core: Move some trip processing to thermal_trip_crossed()
thermal: core: Pass trip descriptor to thermal_trip_crossed()
thermal: core: Rearrange __thermal_zone_device_update()
thermal: core: Prepare for moving trips between sorted lists
thermal: core: Rename trip list node in struct thermal_trip_desc
thermal: core: Build sorted lists instead of sorting them later
thermal/lib: Fix memory leak on error in thermal_genl_auto()
thermal: thresholds: Fix thermal lock annotation issue
tools/thermal/thermal-engine: Take into account the thresholds API
tools/lib/thermal: Add the threshold netlink ABI
tools/lib/thermal: Make more generic the command encoding function
thermal: netlink: Add the commands and the events for the thresholds
...
|
||
|
Linus Torvalds
|
ad52c55e1d |
Power management updates for 6.13-rc1
- Update the amd-pstate driver to set the initial scaling frequency
policy lower bound to be the lowest non-linear frequency (Dhananjay
Ugwekar).
- Enable amd-pstate by default on servers starting with newer AMD Epyc
processors (Swapnil Sapkal).
- Align more codepaths between shared memory and MSR designs in
amd-pstate (Dhananjay Ugwekar).
- Clean up amd-pstate code to rename functions and remove redundant
calls (Dhananjay Ugwekar, Mario Limonciello).
- Do other assorted fixes and cleanups in amd-pstate (Dhananjay Ugwekar
and Mario Limonciello).
- Change the Balance-performance EPP value for Granite Rapids in the
intel_pstate driver to a more performance-biased one (Srinivas
Pandruvada).
- Simplify MSR read on the boot CPU in the ACPI cpufreq driver (Chang
S. Bae).
- Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds to always enforce sched domains rebuild in case EAS needs
to be enabled (Christian Loehle).
- Switch cpufreq back to platform_driver::remove() (Uwe Kleine-König).
- Use proper frequency unit names in cpufreq (Marcin Juszkiewicz).
- Add a built-in idle states table for Granite Rapids Xeon D to the
intel_idle driver (Artem Bityutskiy).
- Fix some typos in comments in the cpuidle core and drivers (Shen
Lichuan).
- Remove iowait influence from the menu cpuidle governor (Christian
Loehle).
- Add min/max available performance state limits to the Energy Model
management code (Lukasz Luba).
- Update pm-graph to v5.13 (Todd Brandt).
- Add documentation for some recently introduced cpupower utility
options (Tor Vic).
- Make cpupower inform users where cpufreq-bench.conf should be located
when opening it fails (Peng Fan).
- Allow overriding cross-compiling env params in cpupower (Peng Fan).
- Add compile_commands.json to .gitignore in cpupower (John B. Wyatt
IV).
- Improve disable c_state block in cpupower bindings and add a test to
confirm that CPU state is disabled to it (John B. Wyatt IV).
- Add Chinese Simplified translation to cpupower (Kieran Moy).
- Add checks for xgettext and msgfmt to cpupower (Siddharth Menon).
-----BEGIN PGP SIGNATURE-----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=w8QT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The amd-pstate cpufreq driver gets the majority of changes this time.
They are mostly fixes and cleanups, but one of them causes it to
become the default cpufreq driver on some AMD server platforms.
Apart from that, the menu cpuidle governor is modified to not use
iowait any more, the intel_idle gets a custom C-states table for
Granite Rapids Xeon D, and the intel_pstate driver will use a more
aggressive Balance- performance default EPP value on Granite Rapids
now.
There are also some fixes, cleanups and tooling updates.
Specifics:
- Update the amd-pstate driver to set the initial scaling frequency
policy lower bound to be the lowest non-linear frequency (Dhananjay
Ugwekar)
- Enable amd-pstate by default on servers starting with newer AMD
Epyc processors (Swapnil Sapkal)
- Align more codepaths between shared memory and MSR designs in
amd-pstate (Dhananjay Ugwekar)
- Clean up amd-pstate code to rename functions and remove redundant
calls (Dhananjay Ugwekar, Mario Limonciello)
- Do other assorted fixes and cleanups in amd-pstate (Dhananjay
Ugwekar and Mario Limonciello)
- Change the Balance-performance EPP value for Granite Rapids in the
intel_pstate driver to a more performance-biased one (Srinivas
Pandruvada)
- Simplify MSR read on the boot CPU in the ACPI cpufreq driver (Chang
S. Bae)
- Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds to always enforce sched domains rebuild in case EAS needs
to be enabled (Christian Loehle)
- Switch cpufreq back to platform_driver::remove() (Uwe Kleine-König)
- Use proper frequency unit names in cpufreq (Marcin Juszkiewicz)
- Add a built-in idle states table for Granite Rapids Xeon D to the
intel_idle driver (Artem Bityutskiy)
- Fix some typos in comments in the cpuidle core and drivers (Shen
Lichuan)
- Remove iowait influence from the menu cpuidle governor (Christian
Loehle)
- Add min/max available performance state limits to the Energy Model
management code (Lukasz Luba)
- Update pm-graph to v5.13 (Todd Brandt)
- Add documentation for some recently introduced cpupower utility
options (Tor Vic)
- Make cpupower inform users where cpufreq-bench.conf should be
located when opening it fails (Peng Fan)
- Allow overriding cross-compiling env params in cpupower (Peng Fan)
- Add compile_commands.json to .gitignore in cpupower (John B. Wyatt
IV)
- Improve disable c_state block in cpupower bindings and add a test
to confirm that CPU state is disabled to it (John B. Wyatt IV)
- Add Chinese Simplified translation to cpupower (Kieran Moy)
- Add checks for xgettext and msgfmt to cpupower (Siddharth Menon)"
* tag 'pm-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
cpufreq: intel_pstate: Update Balance-performance EPP for Granite Rapids
cpufreq: ACPI: Simplify MSR read on the boot CPU
sched/cpufreq: Ensure sd is rebuilt for EAS check
intel_idle: add Granite Rapids Xeon D support
PM: EM: Add min/max available performance state limits
cpufreq/amd-pstate: Move registration after static function call update
cpufreq/amd-pstate: Push adjust_perf vfunc init into cpu_init
cpufreq/amd-pstate: Align offline flow of shared memory and MSR based systems
cpufreq/amd-pstate: Call cppc_set_epp_perf in the reenable function
cpufreq/amd-pstate: Do not attempt to clear MSR_AMD_CPPC_ENABLE
cpufreq/amd-pstate: Rename functions that enable CPPC
cpufreq/amd-pstate-ut: Add fix for min freq unit test
amd-pstate: Switch to amd-pstate by default on some Server platforms
amd-pstate: Set min_perf to nominal_perf for active mode performance gov
cpufreq/amd-pstate: Remove the redundant amd_pstate_set_driver() call
cpufreq/amd-pstate: Remove the switch case in amd_pstate_init()
cpufreq/amd-pstate: Call amd_pstate_set_driver() in amd_pstate_register_driver()
cpufreq/amd-pstate: Call amd_pstate_register() in amd_pstate_init()
cpufreq/amd-pstate: Set the initial min_freq to lowest_nonlinear_freq
cpufreq/amd-pstate: Remove the redundant verify() function
...
|
||
|
Linus Torvalds
|
26c9fdd6f3 |
nolibc changes for 6.13
Changes ------- * Fix potential error due to missing #include on s390 * Compatibility with -Wmissing-fallthrough * Run qemu with more memory during tests -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmclJJ4THHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jDIIEACCBELCRNPpE5RMF/8DDsQ7wiMlQEWS ZLD3ut57m2FBJf1AUTbMMxweNXS5TY/4AZu3tsR0/olFh483GIchvcz5z5kVcetO 4miwhmfsvy4F7XmVoZGFN2nPo8ign+hW4aMVmpC3xzSi5bxGmulcVmmBwV21pVJx 8+xkyXUGAI1/qcuBM56ZxF1b83SkpPBALW5yLK11iHb1CqophoqDx7MpGGExEH4h C2ca4ygXHgstVgmzJF8z4k5M65Ky6mpsi1zO26ixsqurYbNzkrSUjkTSk85Zq+Ee aqvao1sURJ1C+h70gvqmDelErVe4ralhKePneK3LkEbxkWBR7VUMk6kOOq5UhIhr H0rvicVFFvnIrovzsoaEUQLvD5VCdwBdbzK4gb+12PI5D3VQ8VP4nYL/bey8AXNw O+zfvkgZ4IDwffM8RpC4P1lCYC1AyyQ7srwe+juDuPMAfVPYEXZ/cUeFDboDpBHn UIONBpdFqep1/xlGVc9tLm2F+01Z0gbyG52ccFwGK1Q0L2+0q7V9wIh+7qBAi+Jb fiVbz1I/8Z9TCpjDpmUPScZXxEZW4LeCfXH0pjEb6KbDI9fXkCorzOVHes8y+tNl CO28vSZLnDXo89uQshQwr+pj776djkr9d+s2r1WCngIGoivd24evkHyZZ87J88p5 pik3/mLDC9FNfw== =aNvL -----END PGP SIGNATURE----- Merge tag 'nolibc.2024.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: - Fix potential error due to missing #include on s390 - Compatibility with -Wmissing-fallthrough - Run qemu with more memory during tests * tag 'nolibc.2024.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: selftests/nolibc: start qemu with 1 GiB of memory tools/nolibc: compiler: add macro __nolibc_fallthrough tools/nolibc: s390: include std.h |
||
|
Linus Torvalds
|
ba1f9c8fe3 |
arm64 updates for 6.13:
* Support for running Linux in a protected VM under the Arm Confidential
Compute Architecture (CCA)
* Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from libc
* AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
* Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously only
exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing the
signal handler in line with the x86 behaviour for 6.12
* arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access control
- Switch back to platform_driver::remove() now that it returns 'void'
- Add some missing events for the CXL PMU driver
* Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmc5POIACgkQa9axLQDI
XvEDYA//a3eeNkgMuGdnSCVcLz+zy+oNwAwboG/4X1DqL8jiCbI4npwugPx95RIA
YZOUvo9T2aL3OyefpUHll4gFHqx9OwoZIig2F70TEUmlPsGUbh0KBkdfQF3xZPdl
EwV0kHSGEqMWMBwsGJGwgCYrUaf1MUQzh1GBl7VJ2ts5XsJBaBeOyKkysij26wtZ
V+aHq2IUx7qQS7+HC/4P6IoHxKziFcsCMovaKaynP4cw9xXBQbDMcNlHEwndOMyk
pu2zrv7GG0j3KQuVP/2Alf5FKhmI0GVGP/6Nc/zsOmw96w8Kf7HfzEtkHawr2aRq
rqg/c9ivzDn1p+fUBo4ZYtrRk4IAY+yKu6hdzdLTP5+bQrBTWTO9rjQVBm9FAGYT
sCdEj1NqzvExvNHD7X6ut/GJ05lmce3K+qeSXSEysN9gqiT3eomYWMXrD2V2lxzb
rIDDcb/icfaqjt14Mksh19r/rzNeq7noj9CGSmcqw0BHZfHzl38Lai6pdfYzCNyn
vCM/c4c1D/WWX8/lifO1JZVbhDk1jy82Iphg2KEhL8iKPxDsKBBZLmYuU1oa7tMo
WryGAz9+GQwd+W9chFuaOEtMnzvW2scEJ5Eb2fEf0Qj0aEurkL+C9dZR6o1GN77V
DBUxtU628Ef4PJJGfbNCwZzdd8UPYG3a/mKfQQ3dz0oz2LySlW4=
=wDot
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
||
|
Linus Torvalds
|
909d3b571e |
vfs-6.13.pidfs
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcg9wAKCRCRxhvAZXjc ou7GAQDtQ75C+DFjrL4alXjYG7uly0BWgrlRJ4SgNu1I0uUYdgD/UHH2fAkQeKGy xTGT4z0abiELZw9RQ7F6qbiBhA0nIw8= =Plww -----END PGP SIGNATURE----- Merge tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull pidfs update from Christian Brauner: "This adds a new ioctl to retrieve information about a pidfd. A common pattern when using pidfds is having to get information about the process, which currently requires /proc being mounted, resolving the fd to a pid, and then do manual string parsing of /proc/N/status and friends. This needs to be reimplemented over and over in all userspace projects (e.g.: it has been reimplemented in systemd, dbus, dbus-daemon, polkit so far), and requires additional care in checking that the fd is still valid after having parsed the data, to avoid races. Having a programmatic API that can be used directly removes all these requirements, including having /proc mounted. As discussed at LPC24, add an ioctl with an extensible struct so that more parameters can be added later if needed. Start with returning pid/tgid/ppid and some creds unconditionally, and cgroupid optionally" * tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: pidfd: add ioctl to retrieve pid info |
||
|
Linus Torvalds
|
a29835c9d0 |
vfs-6.13.ovl
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcXJQAKCRCRxhvAZXjc
opmaAQDuEpUXi3PSNwgXGRYAzeBpsonoNrBtzSRTlaza7KZCiAEAsFUSbQJNGdkN
TqC9KvI1EiX2hVvWmVBVttBNH6CY+wY=
=4le5
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull overlayfs updates from Christian Brauner:
"Make overlayfs support specifying layers through file descriptors.
Currently overlayfs only allows specifying layers through path names.
This is inconvenient for users that want to assemble an overlayfs
mount purely based on file descriptors:
This enables user to specify both:
fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2);
in addition to:
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0);
There's also a large set of new overlayfs selftests to test new
features and some older properties"
* tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add test for specifying 500 lower layers
selftests: add overlayfs fd mounting selftests
selftests: use shared header
Documentation,ovl: document new file descriptor based layers
ovl: specify layers via file descriptors
fs: add helper to use mount option as path or fd
|
||
|
Linus Torvalds
|
4c797b11a8 |
vfs-6.13.file
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcW4gAKCRCRxhvAZXjc
okF+AP9xTMb2SlnRPBOBd9yFcmVXmQi86TSCUPAEVb+wIldGYwD/RIOdvXYJlp9v
RgJkU1DC3ddkXtONNDY6gFaP+siIWA0=
=gMc7
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
|
||
|
Linus Torvalds
|
4a5df37964 |
10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzkr6AAKCRDdBJ7gKXxA jsb2AP9HCOI4w9rQTmBdnaefXytS7fiiPq+LVNpjJ0NGXX2FSgD/e1NM0wi8KevQ npcvlqTcXtRSJvYNF904aTNyDn+Kuw0= =KFGY -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. All singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: revert "mm: shmem: fix data-race in shmem_getattr()" ocfs2: uncache inode which has failed entering the group mm: fix NULL pointer dereference in alloc_pages_bulk_noprof mm, doc: update read_ahead_kb for MADV_HUGEPAGE fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32 mm/mremap: fix address wraparound in move_page_tables() tools/mm: fix compile error mm, swap: fix allocation and scanning race with swapoff |
||
Frederic Weisbecker
|
d8dfba2c60 | Merge branches 'rcu/fixes', 'rcu/nocb', 'rcu/torture', 'rcu/stall' and 'rcu/srcu' into rcu/dev | ||
Rafael J. Wysocki
|
c6e2a4c9ee |
Merge branch 'pm-tools'
Merge power management utilities updates for 6.13-rc1: - Update pm-graph to v5.13 (Todd Brandt). - Add documentation for some recently introduced cpupower utility options (Tor Vic). - Make cpupower inform users where cpufreq-bench.conf should be located when opening it fails (Peng Fan). - Allow overriding cross-compiling env params in cpupower (Peng Fan). - Add compile_commands.json to .gitignore in cpupower (John B. Wyatt IV). - Improve disable c_state block in cpupower bindings and add a test to confirm that CPU state is disabled to it (John B. Wyatt IV). - Add Chinese Simplified translation to cpupower (Kieran Moy). - Add checks for xgettext and msgfmt to cpupower (Siddharth Menon). * pm-tools: cpupower: add checks for xgettext and msgfmt cpupower: Add Chinese Simplified translation pm-graph v5.13 pm: cpupower: bindings: Add test to confirm cpu state is disabled pm: cpupower: bindings: Improve disable c_state block pm: cpupower: gitignore: Add compile_commands.json pm: cpupower: Makefile: Allow overriding cross-compiling env params pm: cpupower: bench: print config file path when open cpufreq-bench.conf fails tools/power/cpupower: Add documentation for some recently introduced options |
||
Motiejus JakÅ`tys
|
a39326767c |
tools/mm: fix compile error
Add a missing semicolon.
Link: https://lkml.kernel.org/r/20241112171655.1662670-1-motiejus@jakstys.lt
Fixes:
|
||
|
Linus Torvalds
|
cfaaa7d010 |
Including fixes from bluetooth.
Quite calm week. No new regression under investigation.
Current release - regressions:
- eth: revert "igb: Disable threaded IRQ for igb_msix_other"
Current release - new code bugs:
- bluetooth: btintel: direct exception event to bluetooth stack
Previous releases - regressions:
- core: fix data-races around sk->sk_forward_alloc
- netlink: terminate outstanding dump on socket close
- mptcp: error out earlier on disconnect
- vsock: fix accept_queue memory leak
- phylink: ensure PHY momentary link-fails are handled
- eth: mlx5:
- fix null-ptr-deref in add rule err flow
- lock FTE when checking if active
- eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol
Previous releases - always broken:
- sched: fix u32's systematic failure to free IDR entries for hnodes.
- sctp: fix possible UAF in sctp_v6_available()
- eth: bonding: add ns target multicast address to slave device
- eth: mlx5: fix msix vectors to respect platform limit
- eth: icssg-prueth: fix 1 PPS sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2o5W
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Quite calm week. No new regression under investigation.
Current release - regressions:
- eth: revert "igb: Disable threaded IRQ for igb_msix_other"
Current release - new code bugs:
- bluetooth: btintel: direct exception event to bluetooth stack
Previous releases - regressions:
- core: fix data-races around sk->sk_forward_alloc
- netlink: terminate outstanding dump on socket close
- mptcp: error out earlier on disconnect
- vsock: fix accept_queue memory leak
- phylink: ensure PHY momentary link-fails are handled
- eth: mlx5:
- fix null-ptr-deref in add rule err flow
- lock FTE when checking if active
- eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol
Previous releases - always broken:
- sched: fix u32's systematic failure to free IDR entries for hnodes.
- sctp: fix possible UAF in sctp_v6_available()
- eth: bonding: add ns target multicast address to slave device
- eth: mlx5: fix msix vectors to respect platform limit
- eth: icssg-prueth: fix 1 PPS sync"
* tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: sched: u32: Add test case for systematic hnode IDR leaks
selftests: bonding: add ns multicast group testing
bonding: add ns target multicast address to slave device
net: ti: icssg-prueth: Fix 1 PPS sync
stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines
net: Make copy_safe_from_sockptr() match documentation
net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol
ipmr: Fix access to mfc_cache_list without lock held
samples: pktgen: correct dev to DEV
net: phylink: ensure PHY momentary link-fails are handled
mptcp: pm: use _rcu variant under rcu_read_lock
mptcp: hold pm lock when deleting entry
mptcp: update local address flags when setting it
net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.
MAINTAINERS: Re-add cancelled Renesas driver sections
Revert "igb: Disable threaded IRQ for igb_msix_other"
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
virtio/vsock: Improve MSG_ZEROCOPY error handling
vsock: Fix sk_error_queue memory leak
...
|
||
Catalin Marinas
|
83ef4a378e |
Merge branch 'for-next/pkey-signal' into for-next/core
* for-next/pkey-signal: : Bring arm64 pkey signal delivery in line with the x86 behaviour selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests selftests/mm: Enable pkey_sighandler_tests on arm64 selftests/mm: Use generic pkey register manipulation arm64: signal: Remove unused macro arm64: signal: Remove unnecessary check when saving POE state arm64: signal: Improve POR_EL0 handling to avoid uaccess failures firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state() Revert "kasan: Disable Software Tag-Based KASAN with GCC" kasan: Fix Software Tag-Based KASAN with GCC kasan: Disable Software Tag-Based KASAN with GCC Documentation/protection-keys: add AArch64 to documentation arm64: set POR_EL0 for kernel threads # Conflicts: # arch/arm64/kernel/signal.c |
||
|
Catalin Marinas
|
5a4332062e |
Merge branches 'for-next/gcs', 'for-next/probes', 'for-next/asm-offsets', 'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
||
Alexandre Ferrieux
|
ca34aceb32 |
net: sched: u32: Add test case for systematic hnode IDR leaks
Add a tdc test case to exercise the just-fixed systematic leak of IDR entries in u32 hnode disposal. Given the IDR in question is confined to the range [1..0x7FF], it is sufficient to create/delete the same filter 2048 times to fill it up and get a nonzero exit status from "tc filter add". Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Hangbin Liu
|
86fb6173d1 |
selftests: bonding: add ns multicast group testing
Add a test to make sure the backup slaves join correct multicast group when arp_validate enabled and ns_ip6_target is set. Here is the result: TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ] TEST: arp_validate (join mcast group) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Linus Torvalds
|
9f8e716d46 |
BPF fixes:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye) - Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS context retrieval (Zijian Zhang) - Fix BPF bits iterator selftest for s390x (Hou Tao) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZzQV0BUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIPFywD9Fx9Qc7LdWGmRAmWTqGKSOVPTBC1L eC/uXop6sLqapP0A/1KsLQmntvXhp+gmxzPEBdwAwb7/DvyPCQV19FZ/sIkA =lDzI -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Daniel Borkmann: - Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye) - Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS context retrieval (Zijian Zhang) - Fix BPF bits iterator selftest for s390x (Hou Tao) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6 bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx selftests/bpf: Use -4095 as the bad address for bits iterator |
||
|
Linus Torvalds
|
4b49c0ba4e |
10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All
singletons. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzP1ZAAKCRDdBJ7gKXxA jmBUAP9n2zTKoNeF/WpS0aSg+SpG78mtyMIwSUW2PPfGObYTBwD/bncG9U3fnno1 v6Sey0OjAKwGdV+gTd+5ymWJKPSQbgA= =HxTA -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All singletons" * tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: swapfile: fix cluster reclaim work crash on rotational devices selftests: hugetlb_dio: fixup check for initial conditions to skip in the start mm/thp: fix deferred split queue not partially_mapped: fix mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases nommu: pass NULL argument to vma_iter_prealloc() ocfs2: fix UBSAN warning in ocfs2_verify_volume() nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint mm: page_alloc: move mlocked flag clearance into free_pages_prepare() mm: count zeromap read and set for swapout and swapin |
||
Paul E. McKenney
|
32693634cd |
torture: Add --no-affinity parameter to kvm.sh
In performance tests, it can be counter-productive to spread torture-test guest OSes across sockets. Plus the experimenter might have ideas about what CPUs individual guest OSes are to run on. This commit therefore adds a --no-affinity parameter to kvm.sh to prevent it from running taskset on its guest OSes. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> |
||
|
Linus Torvalds
|
14b6320953 |
KVM x86 and selftests fixes for 6.12:
x86:
- When emulating a guest TLB flush for a nested guest, flush vpid01, not
vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and
L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0' to
userspace instead of -errno on failure.
- Move the Intel PT virtualization (i.e. outputting host trace to host
buffer and guest trace to guest buffer) behind CONFIG_BROKEN.
- Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START
- Fix a bug where KVM fails to inject an interrupt from the IRR after
KVM_SET_LAPIC.
Selftests:
- Increase the timeout for the memslot performance selftest to avoid false
failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized a
bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch
is supported by the compiler.
- Fix broken compilation of kvm selftests after a header sync in tools/
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmczm1QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOLKwf+IjkJHZ/LS95HuP/0QLM17Sc4MmiZ
Pk5gLd5un7BBSLA98RvALR/YPnsA7emEJ34bE/8lQ6R5VSZ5PrIzF+29f60HzRFe
EDi1/24dqnzdWn50na5nk7A2QhFpfnLQQTl7vMqPFsrU7gfLuHQI6ABp9kloEwP/
xnjAT683IWNX9v0N2A8kNemy9NNMGssJk1ssDTGzNflSyRNL8cLPGlPkZqAIMsM6
fHjkDRg0UxasUDkL5CjwnTSdBGoz+/Myyz4unFlYGJB9D3+ev2qDlMqATO4Jfik/
peJMZ65i8/8/7MgKCTn8qQuT0FLLEvxTuzDHUSGzjMZl0DGaZi2BPETNqg==
=nW8/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86 and selftests fixes.
x86:
- When emulating a guest TLB flush for a nested guest, flush vpid01,
not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if
L2 and L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0'
to userspace instead of -errno on failure.
- Move the Intel PT virtualization (i.e. outputting host trace to
host buffer and guest trace to guest buffer) behind CONFIG_BROKEN.
- Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START
- Fix a bug where KVM fails to inject an interrupt from the IRR after
KVM_SET_LAPIC.
Selftests:
- Increase the timeout for the memslot performance selftest to avoid
false failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized
a bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug
failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the
uarch is supported by the compiler.
- Fix broken compilation of kvm selftests after a header sync in
tools/"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
KVM: x86: Unconditionally set irr_pending when updating APICv state
kvm: svm: Fix gctx page leak on invalid inputs
KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB
KVM: SVM: Propagate error from snp_guest_req_init() to userspace
KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled
KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported
KVM: selftests: Disable strict aliasing
KVM: selftests: fix unintentional noop test in guest_memfd_test.c
KVM: selftests: memslot_perf_test: increase guest sync timeout
|
||
Donet Tom
|
fae1980347 |
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
This test verifies that a hugepage, used as a user buffer for DIO operations, is correctly freed upon unmapping. To test this, we read the count of free hugepages before and after the mmap, DIO, and munmap operations, then check if the free hugepage count is the same. Reading free hugepages before the test was removed by commit |
||
Mark Brown
|
91a6533811 |
kselftest/arm64: Try harder to generate different keys during PAC tests
We very intermittently see failures in the single_thread_different_keys PAC test. As noted in the comment in the test the PAC field can be quite narrow so there is a chance of collisions even with different keys with a chance of 5% for 7 bit keys, and the potential for narrower keys. The test tries to avoid this by running repeatedly, but only tries 10 times which even with a 5% chance of collisions isn't enough. Increase the number of times we attempt to look for collisions by a factor of 100, this also affects other tests which are following a similar pattern with running the test repeatedly and either don't care like with pac_instruction_not_nop or potentially have the same issue like exec_sign_all. The PAC tests are very fast, running in a second or two even in emulation, so the 100x increased cost is mildly irritating but not a huge issue. The bulk of the overhead is in the exec_sign_all test which does a fork() and exec() per iteration. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-2-171875f37e44@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
27141b6905 |
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
The PAC exec_sign_all() test spawns some child processes, creating pipes to be stdin and stdout for the child. It cleans up most of the file descriptors that are created as part of this but neglects to clean up the parent end of the child stdin and stdout. Add the missing close() calls. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-pac-test-collisions-v1-1-171875f37e44@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
3e360ef0c0 |
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
When building for streaming SVE the irritator for SVE skips updates of both P0 and FFR. While FFR is skipped since it might not be present there is no reason to skip corrupting P0 so switch to an instruction valid in streaming mode and move the ifdef. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-3-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Paul E. McKenney
|
930d4e1344 |
rcutorture: Add light-weight SRCU scenario
This commit adds an rcutorture scenario that tests light-weight SRCU readers. While in the area, it adjusts the size of the TREE10 scenario. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: <bpf@vger.kernel.org> Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> |
||
|
Catalin Marinas
|
016d659e62 |
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
Compiling the child_cleanup() function results in:
gcs-stress.c: In function ‘child_cleanup’:
gcs-stress.c:266:75: warning: format ‘%d’ expects a matching ‘int’ argument [-Wformat=]
266 | ksft_print_msg("%s: Exited due to signal %d\n",
| ~^
| |
| int
Add the missing child->exit_signal argument.
Fixes:
|
||
|
Mark Brown
|
7dbd26d0b2 |
kselftest/arm64: Add FPMR coverage to fp-ptrace
Add coverage for FPMR to fp-ptrace. FPMR can be available independently of SVE and SME, if SME is supported then FPMR is cleared by entering and exiting streaming mode. As with other registers we generate random values to load into the register, we restrict these to bitfields which are always defined. We also leave bitfields where the valid values are affected by the set of supported FP8 formats zero to reduce complexity, it is unlikely that specific bitfields will be affected by ptrace issues. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-3-250b57c61254@kernel.org [catalin.marinas@arm.com: use REG_FPMR instead of FPMR] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
7e9c5b0000 |
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
Currently our test for implementable ZA writes is written in a bit of a convoluted fashion which excludes all changes where we clear SVCR.SM even though we can actually support that since changing the vector length resets SVCR. Make the logic more direct, enabling us to actually run these cases. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-2-250b57c61254@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
c0350076c1 |
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
The assembler portions of fp-ptrace are passed feature flags by the C code indicating which architectural features are supported. Currently these use an entire register for each flag which is wasteful and gets cumbersome as new flags are added. Switch to using flag bits in a single register to make things easier to maintain. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
c297aa7d3f |
kselftest/arm64: Enable build of PAC tests with LLVM=1
Currently we don't build the PAC selftests when building with LLVM=1 since we attempt to test for PAC support in the toolchain before we've set up the build system to point at LLVM in lib.mk, which has to be one of the last things in the Makefile. Since all versions of LLVM supported for use with the kernel have PAC support we can just sidestep the issue by just assuming PAC is there when doing a LLVM=1 build. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241111-arm64-selftest-pac-clang-v1-1-08599ceee418@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
116e50d647 |
kselftest/arm64: Check that SVCR is 0 in signal handlers
We don't currently validate that we exit streaming mode and clear ZA when we enter a signal handler. Add simple checks for this in the SSVE and ZA tests. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org [catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Catalin Marinas
|
929bbc16ab |
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
Since commit |
||
|
Catalin Marinas
|
694e2803fe |
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
Fix the incorrect length modifiers in arm64/abi/syscall-abi.c. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108134920.1233992-4-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Catalin Marinas
|
0cc6b94a44 |
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
While prctl() returns an 'int', the PR_MTE_TCF_MASK is defined as unsigned long which results in the larger type following a bitwise 'and' operation. Cast the printf() argument to 'int'. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108134920.1233992-3-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Catalin Marinas
|
b6bd50dd3b |
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
Lots of incorrect length modifiers, missing arguments or conversion specifiers. Fix them. Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241108134920.1233992-2-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
ae465d9ca1 |
kselftest/arm64: Fix build with stricter assemblers
While some assemblers (including the LLVM assembler I mostly use) will
happily accept SMSTART as an instruction by default others, specifically
gas, require that any architecture extensions be explicitly enabled.
The assembler SME test programs use manually encoded helpers for the new
instructions but no SMSTART helper is defined, only SM and ZA specific
variants. Unfortunately the irritators that were just added use plain
SMSTART so on stricter assemblers these fail to build:
za-test.S:160: Error: selected processor does not support `smstart'
Switch to using SMSTART ZA via the manually encoded smstart_za macro we
already have defined.
Fixes:
|
||
|
Linus Torvalds
|
3022e9d00e |
sched_ext: Fixes for v6.12-rc7
- The fair sched class currently has a bug where its balance() returns true telling the sched core that it has tasks to run but then NULL from pick_task(). This makes sched core call sched_ext's pick_task() without preceding balance() which can lead to stalls in partial mode. For now, work around by detecting the condition and forcing the CPU to go through another scheduling cycle. - Add a missing newline to an error message and fix drgn introspection tool which went out of sync. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZzI8sw4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGb5KAP40b/o6TyAFDG+Hn6GxyxQT7rcAUMXsdB2bcEpg /IjmzQEAwbHU5KP5vQXV6XHv+2V7Rs7u6ZqFtDnL88N0A9hf3wk= =7hL8 -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - The fair sched class currently has a bug where its balance() returns true telling the sched core that it has tasks to run but then NULL from pick_task(). This makes sched core call sched_ext's pick_task() without preceding balance() which can lead to stalls in partial mode. For now, work around by detecting the condition and forcing the CPU to go through another scheduling cycle. - Add a missing newline to an error message and fix drgn introspection tool which went out of sync. * tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx() sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type sched_ext: Add a missing newline at the end of an error message |
||
|
Linus Torvalds
|
0ccd733ac9 |
virtio: bugfixes
Several small bugfixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmcxrosPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpBekH+wcamT5OZybW1+GuCUD0K405UHLtQhJHYe/K pCTHPgcvKLj0qCuUt99mqN+jqa8esAjyML+eozi87d5u3lrN/8KKOXSnji2JJ7Ut uW5t4dqN66MSdkv3iwzDOo8Iww+CwxeQQ0BNljpHnxubkX/WtgLvuS0P2tngcUZW ChcXTrVitCza6WqrnwLliNYc76pXC6oJ4nSbunidlDKNLr0s6vnE1GqW+pHUWi8Z 5DSIlgkqZvtydABuIxnbsRU8rJ+qEfl04lkcKYiAcy3eogD+c6y0k8RlQ16iE7Vt 0rD+1hJnceyP6uq5PAJ7WfhQfsU7IFIarW6JubAtWSh9ZyEr5DY= =K4S6 -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "Several small bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix error path during device add vp_vdpa: fix id_table array not null terminated error virtio_pci: Fix admin vq cleanup by using correct info pointer vDPA/ifcvf: Fix pci_read_config_byte() return code handling Fix typo in vringh_test.c vdpa: solidrun: Fix UB bug with devres vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans |
||
|
Rafael J. Wysocki
|
c285b11e28 | Merge back thermal control material for 6.13 | ||
|
Linus Torvalds
|
28e43197c4 |
20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzBVmAAKCRDdBJ7gKXxA
ju42AQD0EEnzW+zFyI+E7x5FwCmLL6ofmzM8Sw9YrKjaeShdZgEAhcyS2Rc/AaJq
Uty2ZvVMDF2a9p9gqHfKKARBXEbN2w0=
=n+lO
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
|
||
Jakub Kicinski
|
252e01e682 |
selftests: net: add netlink-dumps to .gitignore
Commit
|
||
|
Linus Torvalds
|
da4373fbcf |
Thermal control fixes for 6.12-rc7
- Allow tripless thermal zones defined in a DT to be registered in
accordance with the thermal DT bindings (Icenowy Zheng).
- Annotate LMH IRQs with lockdep classes to prevent lockdep from
reporting a possible recursive locking issue that cannot really
occur (Dmitry Baryshkov).
- Improve the thermal library "make clean" to remove a leftover
symbolic link created during compilation and fix the sampling
handler invocation in that library to pass the correct pointer
to it (Emil Dahl Juhl, zhang jiao).
-----BEGIN PGP SIGNATURE-----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=Fu7b
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix one issue in the qcom lmh thermal driver, a DT handling
issue in the thermal core and two issues in the userspace thermal
library:
- Allow tripless thermal zones defined in a DT to be registered in
accordance with the thermal DT bindings (Icenowy Zheng)
- Annotate LMH IRQs with lockdep classes to prevent lockdep from
reporting a possible recursive locking issue that cannot really
occur (Dmitry Baryshkov)
- Improve the thermal library "make clean" to remove a leftover
symbolic link created during compilation and fix the sampling
handler invocation in that library to pass the correct pointer to
it (Emil Dahl Juhl, zhang jiao)"
* tag 'thermal-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/of: support thermal zones w/o trips subnode
tools/lib/thermal: Remove the thermal.h soft link when doing make clean
tools/lib/thermal: Fix sampling handler context ptr
thermal/drivers/qcom/lmh: Remove false lockdep backtrace
|
||
John Sperbeck
|
10299cdde8 |
KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB
In |
||
Paolo Bonzini
|
9893deb08b |
Merge tag 'kvm-x86-fixes-6.12-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM x86 and selftests fixes for 6.12: - Increase the timeout for the memslot performance selftest to avoid false failures on arm64 and nested x86 platforms. - Fix a goof in the guest_memfd selftest where a for-loop initialized a bit mask to zero instead of BIT(0). - Disable strict aliasing when building KVM selftests to prevent the compiler from treating things like "u64 *" to "uint64_t *" cases as undefined behavior, which can lead to nasty, hard to debug failures. - Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch is supported by the compiler. - When emulating a guest TLB flush for a nested guest, flush vpid01, not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and L1 are sharing VPID '0' (from L1's perspective). - Fix a bug in the SNP initialization flow where KVM would return '0' to userspace instead of -errno on failure. |
||
Muhammad Usama Anjum
|
0268d45799 |
selftests: hugetlb_dio: check for initial conditions to skip in the start
The test should be skipped if initial conditions aren't fulfilled in the
start instead of failing and outputting non-compliant TAP logs. This kind
of failure pollutes the results. The initial conditions are:
- The test should only execute if /tmp file can be allocated.
- The test should only execute if huge pages are free.
Before:
TAP version 13
1..4
Bail out! Error opening file
: Read-only file system (30)
# Planned tests != run tests (4 != 0)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
TAP version 13
1..0 # SKIP Unable to allocate file: Read-only file system
Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes:
|
||
Kevin Brodsky
|
db64dfffca |
selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests
Commit |
||
|
Jakub Kicinski
|
55d42a0c3f |
selftests: net: add a test for closing a netlink socket ith dump in progress
Close a socket with dump in progress. We need a dump which generates enough info not to fit into a single skb. Policy dump fits the bill. Use the trick discovered by syzbot for keeping a ref on the socket longer than just close, with mqueue. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN global.test_sanity ... # OK global.test_sanity ok 1 global.test_sanity # RUN global.close_in_progress ... # OK global.close_in_progress ok 2 global.close_in_progress # RUN global.close_with_ref ... # OK global.close_with_ref ok 3 global.close_with_ref # PASSED: 3 / 3 tests passed. # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Note that this test is not expected to fail but rather crash the kernel if we get the cleanup wrong. Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Mark Brown
|
ead1c35ce3 |
kselftest/arm64: Test signal handler state modification in fp-stress
Currently in fp-stress we test signal delivery to the test threads by sending SIGUSR2 which simply counts how many signals are delivered. The test programs now also all have a SIGUSR1 handler which for the threads doing userspace testing additionally modifies the floating point register state in the signal handler, verifying that when we return the saved register state is restored from the signal context as expected. Switch over to triggering that to validate that we are restoring as expected. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
7368debf27 |
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
The other stress test programs provide a SIGUSR1 handler which modifies the live register state in order to validate that signal context is being restored during signal return. While we can't usefully do this when testing kernel mode FP usage provide a handler for SIGUSR1 which just counts the number of signals like we do for SIGUSR2, allowing fp-stress to treat all the test programs uniformly. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |