The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZtgFj1y5ggipgEOS@hovoldconsulting.com/
Fixes: 0e2a9a0310 ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-7-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a8 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Use of_property_match_string() instead of open-coding the search. With
this, of_get_property() can be removed as there is no need to check for
"mbox-names" presence first.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs
Link: https://github.com/raspberrypi/firmware/issues/1894
Fixes: 0bae6af6d7 ("mailbox: Enable BCM2835 mailbox support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Due to clk only used in probe, not in suspend\resume, this pointer can
remove from sprd_mbox_priv to save a little memory.
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module
properly autoloaded based on the alias from of_device_id table. It
should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match',
just fix it.
Fixes: f70ed3b5dc ("mailbox: rockchip: Add Rockchip mailbox driver")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There are several MUs for different usage, SCMI MU, ELE MU, RemotePROC
MU. Using "imx_mu_chan" in interrupt name would be hard to identify
which MU triggers interrupt, so use device name to make it easy to know
which MU triggers which interrupt.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The ARM MHUv3 controller is only present on ARM64 SoCs. Hence add a
dependency on ARM64, to prevent asking the user about this driver when
configuring a kernel for a different architecture than ARM64.
Fixes: ca1a8680b1 ("mailbox: arm_mhuv3: Add driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
When mtk-cmdq unbinds, a WARN_ON message with condition
pm_runtime_get_sync() < 0 occurs.
According to the call tracei below:
cmdq_mbox_shutdown
mbox_free_channel
mbox_controller_unregister
__devm_mbox_controller_unregister
...
The root cause can be deduced to be calling pm_runtime_get_sync() after
calling pm_runtime_disable() as observed below:
1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe()
to bind the cmdq device to the mbox_controller, so
devm_mbox_controller_unregister() will automatically unregister
the device bound to the mailbox controller when the device-managed
resource is removed. That means devm_mbox_controller_unregister()
and cmdq_mbox_shoutdown() will be called after cmdq_remove().
2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after
devm_mbox_controller_register(), so that devm_pm_runtime_disable()
will be called after cmdq_remove(), but before
devm_mbox_controller_unregister().
To fix this problem, cmdq_probe() needs to move
devm_mbox_controller_register() after devm_pm_runtime_enable() to make
devm_pm_runtime_disable() be called after
devm_mbox_controller_unregister().
Fixes: 623a6143a8 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There are cases where remote that is acking mailbox message can take longer
than the default tx_poll_period value. Therefore, enable this to be mutable.
Added tx_poll_period field while inserting the module to set the
poll period for ack after sending mailbox message.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This newly added driver fails compile testing on 32-bit architectures
because it relies on 64-bit MMIO register access:
drivers/mailbox/qcom-cpucp-mbox.c: In function 'qcom_cpucp_mbox_irq_fn':
drivers/mailbox/qcom-cpucp-mbox.c:54:18: error: implicit declaration of function 'readq'; did you mean 'readb'? [-Wimplicit-function-declaration]
54 | status = readq(cpucp->rx_base + APSS_CPUCP_RX_MBOX_STAT);
| ^~~~~
| readb
drivers/mailbox/qcom-cpucp-mbox.c:65:17: error: implicit declaration of function 'writeq'; did you mean 'writeb'? [-Wimplicit-function-declaration]
65 | writeq(BIT(i), cpucp->rx_base + APSS_CPUCP_RX_MBOX_CLEAR);
| ^~~~~~
| writeb
Change the Kconfig dependency to disallow that configuration as well.
Fixes: 0e2a9a0310 ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add support for CPUSS Control Processor (CPUCP) mailbox controller,
this driver enables communication between AP and CPUCP by acting as
a doorbell between them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mailbox/mtk-cmdq-mailbox.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
'pdf_dma_map' has been unused since the original
commit a24532f8d1 ("mailbox: Add Broadcom PDC mailbox driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Two TXDB_V2 channels are used between Linux and System Manager(SM).
Channel0 for normal TX, Channel 1 for notification completion.
The TXDB_V2 trigger logic is using imx_mu_xcr_rmw which uses
read/modify/update logic.
Note: clear MUB GSR BITs, the MUA side GCR BITs will also got cleared per
hardware design.
Channel0 Linux
read GCR->modify GCR->write GCR->M33 SM->read GSR----->clear GSR
|-(1)-|
Channel1 Linux start in time slot(1)
read GCR->modify GCR->write GCR->M33 SM->read GSR->clear GSR
So Channel1 read GCR will read back the GCR that Channel0 wrote, because
M33 has not finish clear GSR, this means Channel1 GCR writing will
trigger Channel1 and Channel0 interrupt both which is wrong.
Channel0 will be freed(SCMI channel status set to FREE) in M33 SM when
processing the 1st Channel0 interrupt. So when 2nd interrupt trigger
(channel 0/1 trigger together), SM will see a freed Channel0, and report
protocol error.
To address the issue, not using read/modify/update logic, just use
write, because write 0 to GCR will be ignored. And after write MUA GCR,
wait the SM to clear MUB GSR by looping MUA GCR value.
Fixes: 5bfe4067d3 ("mailbox: imx: support channel type tx doorbell v2")
Reviewed-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Multiple mailbox users can share one interrupt line. This flag was
mistakenly dropped as part of the FIFO removal. Mark the IRQ as shared.
Reported-by: Beleswar Padhi <b-padhi@ti.com>
Fixes: 3f58c1f420 ("mailbox: omap: Remove kernel FIFO message queuing")
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Now that the clock probing code uses devm_kasprintf(), there is
no more restriction on the number of GCEs: dynamically allocate
the clk_bulk_data clocks array to improve flexibility and also
to get a slight memory saving on platforms featuring only one
CMDQ mailbox (and consequently only one Global Command Engine).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Move the clocks probe to a new cmdq_get_clocks() function; while
at it, partially refactor the code:
Drop the clk_names[] array and assign clock names to the array
of clk_bulk_data with devm_kasprintf() instead, slightly reduce
the indentation for the multi-gce clock probe path and add a
comment describing the reason why we get clocks of other GCE
instance instead of just the clock from the one that it is
getting probed.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Global Command Engine mailbox has only one clock hence
requiring clock-names is useless.
Get the first (and only) clock instead, without name checks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:
ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!
I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.
Address the link failure by just removing the line.
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
Based on the work done by Tejun Heo <tj@kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown()
will return 1 when pm runtime state is active, and we don't want to
get the warning message in this case.
So we change the return value < 0 for WARN_ON().
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add MODULE_DEVICE_TABLE(), so this module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
At least one IPI is used in TF-A for communication with PMC firmware.
If this IPI needs to be used by other agents such as RPU then, IPI
system interrupt can't be generated in mailbox driver. In such case
TF-A generates SGI to mailbox driver for IPI notification.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add support for ARM MHUv3 mailbox controller.
Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX
combined interrupts.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The kernel FIFO queue has a couple issues. The biggest issue is that
it causes extra latency in a path that can be used in real-time tasks,
such as communication with real-time remote processors.
The whole FIFO idea itself looks to be a leftover from before the
unified mailbox framework. The current mailbox framework expects
mbox_chan_received_data() to be called with data immediately as it
arrives. Remove the FIFO and pass the messages to the mailbox
framework directly as part of a threaded IRQ handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
It is much more clear to check if the hardware FIFO is full and return
EBUSY if true. This allows us to also remove one level of indention
from the core of this function. It also makes the similarities between
omap_mbox_chan_send_noirq() and omap_mbox_chan_send() more obvious.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This function only checks if mbox_chan *chan is not NULL, but that cannot
be the case and if it was returning NULL which is not later checked
doesn't save us from this. The second check for chan->con_priv is
completely redundant as if it was NULL we would return NULL just the
same. Simply dereference con_priv directly and remove this function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver stores a list of omap_mbox structs so it can later use it to
lookup the mailbox names in of_xlate. This same information is already
available in the mbox_controller passed into of_xlate. Simply use that
data and remove the extra allocation and storage of the omap_mbox list.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The mbox_controller struct is only needed in the probe function. Make
it a local variable instead of storing a copy in omap_mbox_device
to simplify that struct.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Currently the driver loops through all mailbox child nodes twice, once
to read in data from each node, and again to make use of this data.
Instead read the data and make use of it in one pass. This removes
the need for several temporary data structures and reduces the
complexity of this main loop in probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Use device life-cycle managed runtime enable function to simplify probe
and exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver currently creates a new device class "mbox". Then for each
mailbox adds a device to that class. This class provides no file
operations provided for any userspace users of this device class.
It may have been extended to be functional in our vendor tree at
some point, but that is not the case anymore, nor does it matter
for the upstream tree.
Remove this device class and related functions and variables.
This also allows us to switch to module_platform_driver() as
there is nothing left to do in module_init().
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The type of message sent using omap-mailbox is always u32. The definition
of mbox_msg_t is uintptr_t which is wrong as that type changes based on
the architecture (32bit vs 64bit). This type should have been defined as
u32. Instead of making that change here, simply remove the header usage
and fix the last couple users of the same in this driver.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The mbox_kfifo_size can be changed at runtime, the sanity
check on it's value should be done when it is used, not
only once at init time.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This is only used internal to the driver, move it out of the
public header and into the driver file. While we are here,
this is not used as a bitwise, so drop that and make it a
simple enum type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
These function are not used, remove these here.
While here, remove the leading _ from the driver internal functions that
do the same thing as the functions removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
On Xilinx-AMD Versal and Versal-NET, there exist both
inter-processor-interrupts with corresponding message buffers and without
such buffers.
Add a routine that, if the corresponding DT compatible
string "xlnx,versal-ipi-mailbox" is used then a Versal-based SOC
can use a mailbox Device Tree entry where both host and remote
can use either of the buffered or bufferless interrupts.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Move routine that initializes the mailboxes for send and receive to
a function pointer that is set based on compatible string.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The of_match structure zynqmp_ipi_of_match is now adjacent to where it
used in the zynqmp_ipi_driver structure for readability.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
misc: I will be signing-off from my personal gmail id from now on.
-----BEGIN PGP SIGNATURE-----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=+39i
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX95 ELE/V2X MU
- misc: I will be signing-off from my personal gmail id from now on
* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: imx: support i.MX95 Generic/ELE/V2X MU
mailbox: imx: populate sub-nodes
mailbox: imx: get RR/TR registers num from Parameter register
mailbox: imx: support return value of init
dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
Add i.MX95 Generic/ELE/V2X MU support, its register layout is same as
i.MX8ULP, but the Parameter registers would show different
TR/RR. Since the driver already supports get TR/RR from Parameter
registers, not hardcoding the number, this patch just add
the compatible entry to reuse i.MX8ULP S4 cfg data.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Some MUs such as i.MX95 MU, have internal SRAM which could be used
for SCMI shared memory, so populate the sub-nodes to use the SRAM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
i.MX8ULP, i.MX93 MU has a Parameter register encoded as below:
BIT: 15 --- 8 | 7 --- 0
RR_NUM TR_NUM
So to make driver easy to support more variants, get the RR/TR
registers number from Parameter register.
The patch only adds support the specific MU, such as ELE MU.
For generic MU, not add support for number larger than 4.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There will be changes that init may fail, so adding return value for
init function.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Switch all the users of the platform MSI domain over to invoke the new
interfaces which branch to the original platform MSI functions when the
irqdomain associated to the caller device does not yet provide MSI parent
functionality.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com
Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
