Commit Graph

7613 Commits

Author SHA1 Message Date
Rafael J. Wysocki
42787ed796 ACPI: PM: Fix regression in acpi_device_set_power()
Commit f850a48a07 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.

Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.

Fixes: f850a48a07 ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-01 23:39:17 +02:00
Rafael J. Wysocki
10a08fd65e ACPI: PM: Set up EC GPE for system wakeup from drivers that need it
The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360).  It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.

For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.

While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).

[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
 are there to prevent the EC GPE from being disabled by the
 acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
 systems with either intel-hid or intel-vbtn this change doesn't
 affect any interactions with the hardware or platform firmware.]

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-07-30 12:26:21 +02:00
Linus Torvalds
523634db14 libnvdimm fixes v5.3-rc2
- Fix duplicate device_unregister() calls (multiple threads competing to
   do unregister work when scheduling device removal from a sysfs attribute
   of the self-same device).
 
 - Fix badblocks registration order bug. Ensure region badblocks are
   initialized in advance of namespace registration.
 
 - Fix a deadlock between the bus lock and probe operations.
 
 - Export device-core infrastructure to coordinate async operations via
   the device ->dead state.
 
 - Add device-core infrastructure to validate device_lock() usage with
   lockdep.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdO39XAAoJEB7SkWpmfYgCzbEQAJigRJecrz+OyICGmIAeNSy5
 hF6Cv+TPuccpnINNaULS7aJStv4Zl/3SxG5GkivKDk11Xs02VrLzv1m3nDxEOVwc
 6LwRwcM7U3UtROzI5gjfT5StgBU4xvlQYKiYV5oxAXoQ5amApqbl3NgfH3qmCaXR
 QqWhd7v7TiNZ1QWlnmRBw+j0YLbS1dHyaSAf4KZwnL6fVKmqxtfDxny5tG6jdDuq
 olPue6nFAA+ebxyAsKR9VQVmcxDwuG0bJ/GUD6IeOQp/Eh6hcv2AfcVjp4Iwn/aM
 n1dIXASFwKr6DoOXZgnUbfXMVGzq1qKHPNgzUvtK6SApZlcm+TnyIOfj0/6BNp9q
 Bae1RMRwo5Wa5oAQed3CutvUUQAPa5WrW95E0/4T+dkcutkRnxL6akn/c87qQ4nL
 F30zpL8U4UdeaJ5maEIqJ/mtAc9deHiFnO/k216+xvDcY3NGqvzY4PsUBAMep8i2
 FgoaBr0hmTkb0KTMI858ChQrT+sjqwJIa854g7b4VxrQz93WYPABRK9ZhMSBEJ8b
 rGCeNqvvq0G6dSN6e8bS6P/4EEk76nZAJUYKoMYmj3WuwYuY4Sxb86eFIudNeSEe
 EqRGaefaZrqEL6LJTHScCk+55BgYSEOrDdip1lSWGdNHjvgZeIOZrgCrqrm/H72c
 mkoCAzdA4drQ0D4ZbKrC
 =mhIp
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A collection of locking and async operations fixes for v5.3-rc2. These
  had been soaking in a branch targeting the merge window, but missed
  due to a regression hunt. This fixed up version has otherwise been in
  -next this past week with no reported issues.

  In order to gain confidence in the locking changes the pull also
  includes a debug / instrumentation patch to enable lockdep coverage
  for libnvdimm subsystem operations that depend on the device_lock for
  exclusion. As mentioned in the changelog it is a hack, but it works
  and documents the locking expectations of the sub-system in a way that
  others can use lockdep to verify. The driver core touches got an ack
  from Greg.

  Summary:

   - Fix duplicate device_unregister() calls (multiple threads competing
     to do unregister work when scheduling device removal from a sysfs
     attribute of the self-same device).

   - Fix badblocks registration order bug. Ensure region badblocks are
     initialized in advance of namespace registration.

   - Fix a deadlock between the bus lock and probe operations.

   - Export device-core infrastructure to coordinate async operations
     via the device ->dead state.

   - Add device-core infrastructure to validate device_lock() usage with
     lockdep"

* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  driver-core, libnvdimm: Let device subsystems add local lockdep coverage
  libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
  libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
  libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
  libnvdimm/region: Register badblocks before namespaces
  libnvdimm/bus: Prevent duplicate device_unregister() calls
  drivers/base: Introduce kill_device()
2019-07-27 08:25:51 -07:00
Lorenzo Pieralisi
5a46d3f71d ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.

Update the comparison condition and clarify the resulting error
message.

Fixes: 4bf2efd26d ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-07-23 15:45:46 +01:00
Rafael J. Wysocki
56b9918490 PM: sleep: Simplify suspend-to-idle control flow
After commit 33e4f80ee6 ("ACPI / PM: Ignore spurious SCI wakeups
from suspend-to-idle") the "noirq" phases of device suspend and
resume may run for multiple times during suspend-to-idle, if there
are spurious system wakeup events while suspended.  However, this
is complicated and fragile and actually unnecessary.

The main reason for doing this is that on some systems the EC may
signal system wakeup events (power button events, for example) as
well as events that should not cause the system to resume (spurious
system wakeup events).  Thus, in order to determine whether or not
a given event signaled by the EC while suspended is a proper system
wakeup one, the EC GPE needs to be dispatched and to start with that
was achieved by allowing the ACPI SCI action handler to run, which
was only possible after calling resume_device_irqs().

However, dispatching the EC GPE this way turned out to take too much
time in some cases and some EC events might be missed due to that, so
commit 68e2201185 ("ACPI: EC: Dispatch the EC GPE directly on
s2idle wake") started to dispatch the EC GPE right after a wakeup
event has been detected, so in fact the full ACPI SCI action handler
doesn't need to run any more to deal with the wakeups coming from the
EC.

Use this observation to simplify the suspend-to-idle control flow
so that the "noirq" phases of device suspend and resume are each
run only once in every suspend-to-idle cycle, which is reported to
significantly reduce power drawn by some systems when suspended to
idle (by allowing them to reach a deep platform-wide low-power state
through the suspend-to-idle flow).  [What appears to happen is that
the "noirq" resume of devices after a spurious EC wakeup brings some
devices into a state in which they prevent the platform from reaching
the deep low-power state going forward, even after a subsequent
"noirq" suspend phase, and on some systems the EC triggers such
wakeups already when the "noirq" suspend of devices is running for
the first time in the given suspend/resume cycle, so the platform
cannot reach the deep low-power state at all.]

First, make acpi_s2idle_wake() use the acpi_ec_dispatch_gpe() return
value to determine whether or not the wakeup may have been triggered
by the EC (in which case the system wakeup is canceled and ACPI
events are processed in order to determine whether or not the event
is a proper system wakeup one) and use rearm_wake_irq() (introduced
by a previous change) in it to rearm the ACPI SCI for system wakeup
detection in case the system will remain suspended.

Second, drop acpi_s2idle_sync(), which is not needed any more, and
the corresponding global platform suspend-to-idle callback.

Next, drop the pm_wakeup_pending() check (which is an optimization
only) from __device_suspend_noirq() to prevent it from returning
errors on system wakeups occurring before the "noirq" phase of
device suspend is complete (as in the case of suspend-to-idle it is
not known whether or not these wakeups are suprious at that point),
in order to avoid having to carry out a "noirq" resume of devices
on a spurious system wakeup.

Finally, change the code flow in s2idle_loop() to (1) run the
"noirq" suspend of devices once before starting the loop, (2) check
for spurious EC wakeups (via the platform ->wake callback) for the
first time before calling s2idle_enter(), and (3) run the "noirq"
resume of devices once after leaving the loop.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-23 09:46:40 +02:00
Rafael J. Wysocki
41275eb5c7 ACPI: PM: Set s2idle_wakeup earlier and clear it later
The role of the s2idle_wakeup variable is to cause
acpi_pm_wakeup_event() and acpi_pm_notify_handler() to
increment pm_abort_suspend and trigger a wakeup from
suspend-to-idle in case the ACPI SCI wakeup was canceled
by acpi_s2idle_wake().

However, for this purpose it need not be set in acpi_s2idle_wake()
and cleared in acpi_s2idle_sync(), respectively.  In fact, it
may be set as early as in acpi_s2idle_prepare() and cleared as
late as in acpi_s2idle_restore(), so do that to allow subsequent
changes to be simpler.

This change is not expected to alter functionality.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-23 09:46:33 +02:00
Rafael J. Wysocki
9089f16e05 ACPI: EC: Return bool from acpi_ec_dispatch_gpe()
On some systems, if suspend-to-idle is used, the EC may signal system
wakeup events (power button events, for example) as well as events
that should not cause the system to resume and acpi_ec_dispatch_gpe()
needs to be called to determine whether or not the system should
resume then.  In particular, if acpi_ec_dispatch_gpe() doesn't detect
any EC events at all, the system should remain suspended, so it is
useful to know when that is the case.

For this reason, make acpi_ec_dispatch_gpe() return a bool value
indicating whether or not any EC events have been detected by it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-23 09:46:20 +02:00
Rafael J. Wysocki
6921de898b ACPICA: Return u32 from acpi_dispatch_gpe()
In some cases it is useful to know whether or not the
acpi_ev_detect_gpe() called by acpi_dispatch_gpe() has found
the GPE to be active, so return the return value of it (whose
data type is u32) from latter.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-07-23 09:46:13 +02:00
Linus Torvalds
249be8511b Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
 "The rest of MM and a kernel-wide procfs cleanup.

  Summary of the more significant patches:

   - Patch series "mm/memory_hotplug: Factor out memory block
     devicehandling", v3. David Hildenbrand.

     Some spring-cleaning of the memory hotplug code, notably in
     drivers/base/memory.c

   - "mm: thp: fix false negative of shmem vma's THP eligibility". Yang
     Shi.

     Fix /proc/pid/smaps output for THP pages used in shmem.

   - "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit.

     Bugfix and speedup for kernel/resource.c

   - Patch series "mm: Further memory block device cleanups", David
     Hildenbrand.

     More spring-cleaning of the memory hotplug code.

   - Patch series "mm: Sub-section memory hotplug support". Dan
     Williams.

     Generalise the memory hotplug code so that pmem can use it more
     completely. Then remove the hacks from the libnvdimm code which
     were there to work around the memory-hotplug code's constraints.

   - "proc/sysctl: add shared variables for range check", Matteo Croce.

     We have about 250 instances of

          int zero;
          ...
                  .extra1 = &zero,

     in the tree. This is a tree-wide sweep to make all those private
     "zero"s and "one"s use global variables.

     Alas, it isn't practical to make those two global integers const"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
  proc/sysctl: add shared variables for range check
  mm: migrate: remove unused mode argument
  mm/sparsemem: cleanup 'section number' data types
  libnvdimm/pfn: stop padding pmem namespaces to section alignment
  libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields
  mm/devm_memremap_pages: enable sub-section remap
  mm: document ZONE_DEVICE memory-model implications
  mm/sparsemem: support sub-section hotplug
  mm/sparsemem: prepare for sub-section ranges
  mm: kill is_dev_zone() helper
  mm/hotplug: kill is_dev_zone() usage in __remove_pages()
  mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap()
  mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal
  mm/sparsemem: add helpers track active portions of a section at boot
  mm/sparsemem: introduce a SECTION_IS_EARLY flag
  mm/sparsemem: introduce struct mem_section_usage
  drivers/base/memory.c: get rid of find_memory_block_hinted()
  mm/memory_hotplug: move and simplify walk_memory_blocks()
  mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns
  mm: make register_mem_sect_under_node() static
  ...
2019-07-19 09:45:58 -07:00
David Hildenbrand
fbcf73ce65 mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns
walk_memory_range() was once used to iterate over sections.  Now, it
iterates over memory blocks.  Rename the function, fixup the
documentation.

Also, pass start+size instead of PFNs, which is what most callers
already have at hand.  (we'll rework link_mem_sections() most probably
soon)

Follow-up patches will rework, simplify, and move walk_memory_blocks()
to drivers/base/memory.c.

Note: walk_memory_blocks() only works correctly right now if the
start_pfn is aligned to a section start.  This is the case right now,
but we'll generalize the function in a follow up patch so the semantics
match the documentation.

[akpm@linux-foundation.org: remove unused variable]
Link: http://lkml.kernel.org/r/20190614100114.311-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18 17:08:06 -07:00
Dan Williams
87a30e1f05 driver-core, libnvdimm: Let device subsystems add local lockdep coverage
For good reason, the standard device_lock() is marked
lockdep_set_novalidate_class() because there is simply no sane way to
describe the myriad ways the device_lock() ordered with other locks.
However, that leaves subsystems that know their own local device_lock()
ordering rules to find lock ordering mistakes manually. Instead,
introduce an optional / additional lockdep-enabled lock that a subsystem
can acquire in all the same paths that the device_lock() is acquired.

A conversion of the NFIT driver and NVDIMM subsystem to a
lockdep-validate device_lock() scheme is included. The
debug_nvdimm_lock() implementation implements the correct lock-class and
stacking order for the libnvdimm device topology hierarchy.

Yes, this is a hack, but hopefully it is a useful hack for other
subsystems device_lock() debug sessions. Quoting Greg:

    "Yeah, it feels a bit hacky but it's really up to a subsystem to mess up
     using it as much as anything else, so user beware :)

     I don't object to it if it makes things easier for you to debug."

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com
2019-07-18 16:23:27 -07:00
Linus Torvalds
f8c3500cd1 - virtio_pmem: The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX mechanisms to
   access a host-file with host-page-cache. It arranges for MAP_SYNC to
   be disabled and instead triggers a host fsync() when a 'write-cache
   flush' command is sent to the virtual disk device.
 
 - Miscellaneous small fixups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdMHwpAAoJEB7SkWpmfYgCUYoP/3vcgYBAaXNksyALF0iowPoP
 z4J0KoaOA1CzRFEQtCWUQa84CWj+XoSewwSeyrIkqKQvx/gghXblK+GVjVzBn0BD
 hmmiKr8af4DdxfzYdEXJp65cCpIiVMaJiGr20Aj9ObwvWJb4QZbz9q7hnPt6KgiI
 jVND3BpP3OERb4ZFcibdmJT5foKooMcXVG6+luVe+hc1+ZZQxJBsBaqie4brQIFq
 j59NX3HfHH2fr1vVwnVH0CO4tgbgYg9wZ2EivGu6wBWvORjrr7KiSSbOYP68EBtd
 lUoNps+vQtGnfXGwNzAjp1wuknrQYYh4/KMKjep7hiZD39rgyvBpbHbyynKzQCWV
 REe8cXr/nwphsENvBAUBiqY999EWVIxdT2iaVaSA6K/31JQAC5AFyxVK/P2Ke1SK
 rvePZ++iLQ1o4phTxQPNlVUqF9jOrFVVICGwMDqaqSkOsD9YKQdFClfOF/1ntlDz
 V0bs+Y0Pe8AJCd9ESep4X+vHAWRRIb4EQIuwLaX8RJoY+r1fGye9RPthpYYzvXKp
 DI2iJztFO3anzj2i9htNPUFIaiUmIhzEvG32O2If2yc5FL02hMpHPoFx6vHhe6s3
 f8OJ+olsJK+/IIrV8+DHqYvhzylOYIhmRTvIxIxaNDPHkhR1i2RDQ6KKK1YZmsr8
 MjAZ+Ym0GadDivs+wcM6
 =uAMG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "Primarily just the virtio_pmem driver:

   - virtio_pmem

     The new virtio_pmem facility introduces a paravirtualized
     persistent memory device that allows a guest VM to use DAX
     mechanisms to access a host-file with host-page-cache. It arranges
     for MAP_SYNC to be disabled and instead triggers a host fsync()
     when a 'write-cache flush' command is sent to the virtual disk
     device.

   - Miscellaneous small fixups"

* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  virtio_pmem: fix sparse warning
  xfs: disable map_sync for async flush
  ext4: disable map_sync for async flush
  dax: check synchronous mapping is supported
  dm: enable synchronous dax
  libnvdimm: add dax_dev sync flag
  virtio-pmem: Add virtio pmem driver
  libnvdimm: nd_region flush callback support
  libnvdimm, namespace: Drop uuid_t implementation detail
2019-07-18 10:52:08 -07:00
Linus Torvalds
4b09ddbcd1 Additional ACPI updates for 5.3-rc1
- Make ACPI table loading work more consistently regardless of the
    exact mechanism used for loading a table (Erik Schmauss).
 
  - Get rid of two clang warnings (Arnd Bergmann).
 
  - Add new quirk mechanism to the ACPI backlight driver and use it
    to add a quirk for PB Easynote MZ35 (Hans de Goede).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0wLKgSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxBvUP/3/5QAPjdyMwOF7Iyz1QQoK8lSLS9dQi
 W4yWZ4q8u1kjwCvhnEFvlrZyP+OTVj56hZKJmyYxsY1etpM2uznEcMcCyshOmFx3
 oyx8A3D81eIFIRHJaT6qEiCshXxnMlHvwYERWe/m4wBl4WxfSXmk9HT/0/uUVjEn
 lFiztOd4Qr55e8BK69XYv14MpZoANAap1q9oaHZpJMFGSRu1Jaywy8/uml6gQkEy
 QlS4pfOB41b8bQSHj1BwXeHgxlI4Hti0URYBQfKew+ebk/U3be6LDVb6ePGkTy/k
 mva0fdsjKrtxtZlMPrJ++ltamBgb+OKY0Nx9T0ITBvV25PhZpxv5w16h1emVaX3q
 RmSDHco3F+Bf5kfKZr64ZkJGysLa4urUJDO+u7Pw2IjjgtMGq8O6Qec2FUhvyCBB
 5vOg1FL12B11egAgqiQz1zR9hNV+cXfVCdyhsy2Q4tvFvHCiyQ8EYXYsNcpPAVlY
 nrMEpjEOWbkiOvi2/K0rP4BCuIaIVhR1Jkw4SmZSFT/VBM1R88SMojtcuzp1HZs0
 8t1ocBFZK8VLP7VKHFO58GDN5YAQvloo0Uioktim6NndX7C8DO3gx6xeThZAbsOH
 KdX5jlnZetOZjlcmF0KwALVGLMBcCPV/FVYDlmmCuRlrUc8+3McUmDptHPCVl8fa
 sLc0n9AD2J4b
 =PqWP
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These get rid of two clang warnings, add a new quirk mechanism to the
  ACPI backlight driver (and apply it to one machine) and update the
  table load object initialization in ACPICA (this is a replacement for
  a previously reverted ACPICA commit).

  Specifics:

   - Make ACPI table loading work more consistently regardless of the
     exact mechanism used for loading a table (Erik Schmauss).

   - Get rid of two clang warnings (Arnd Bergmann).

   - Add new quirk mechanism to the ACPI backlight driver and use it to
     add a quirk for PB Easynote MZ35 (Hans de Goede)"

* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table
  ACPICA: Update table load object initialization
2019-07-18 09:12:34 -07:00
Rafael J. Wysocki
2c66a5b52e Merge branches 'acpi-misc' and 'acpi-video'
* acpi-misc:
  ACPI: fix false-positive -Wuninitialized warning
  ACPI: blacklist: fix clang warning for unused DMI table

* acpi-video:
  ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
2019-07-18 10:22:20 +02:00
Hans de Goede
4f7f96453b ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
Some machines change the brightness themselves when a brightness hotkey
gets pressed, despite us telling them not to. This causes the brightness to
go two steps up / down when the hotkey is pressed. This is esp. a problem
on older machines with only a few brightness levels.

This commit adds a new hw_changes_brightness quirk which makes
acpi_video_device_notify() only call backlight_force_update(...,
BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace
that the brightness was changed and leaving it at that fixing the dual
step problem.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077
Reported-by: Kacper Piwiński <cosiekvfj@o2.pl>
Tested-by: Kacper Piwiński <cosiekvfj@o2.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-16 17:30:09 +02:00
Linus Torvalds
fb4da215ed pci-v5.3-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl0siFoUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vzi9A//S4jRyyZrgUr88Az0GbgMhE4b3yqc
 uL7om/Sf+443gG6C+aKkZSM/IE9hrbyIKuYq7GGxDkzZ/HkucZo2yIuAHkPgG4ik
 QQYJ8fJsmMq1bUht87c1ZZwGP0++Deq/Ns2+VNy/WBYqKLulnV0DvEEaJgPs9C5D
 ppwccGdo6UghiujBTpE4ddUBjFjjURWqT6wSnMRDQ4EGwfUhG0MWwwHKI4hbBuaL
 N6refuggdYyUUX5FeUOHa6VF6uTnSSAQ75k+40n4nljdayqoumHLskst77o9q5ZI
 oXjdpwgmuEqYhfp03HEA4Xo/bBxiRj76NuTiEMKvPokxjpanwbLrdV0GhF0OIlM0
 rp1NOI1w+vppFrU+rc2gtq+7hYXFmvdhjS29hFLeD91PP36N5d29jW5NVFpm7GCm
 n4TMGAOsu8RB+bNua6ZbZVcDk2EnPgQeIcM0ZPoBtPK19Fg/rScdEU4u/aFE1Y0Q
 C+Ks7D1qCvFpHzl/xAg0oo9v/jFsWef3qnQWOzot964Zz4W4NSVvB9Ox6Vbfj6C4
 v331LJmlPxG8fxBNA3q28FrTxcG1NW6sgo3WY9VoSp/vc0aqaPKhm7sbraTt5IrI
 TwqA/WhnAHv90MQCGFcofANyYTkjPkKk2QBFK6b0suoAmVdwVWWELi1WaZ+HdvgQ
 JP7YpmC2cXcQBPk=
 =ZGxL
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...
2019-07-15 20:44:49 -07:00
Linus Torvalds
f632a8170a Driver Core and debugfs changes for 5.3-rc1
Here is the "big" driver core and debugfs changes for 5.3-rc1
 
 It's a lot of different patches, all across the tree due to some api
 changes and lots of debugfs cleanups.  Because of this, there is going
 to be some merge issues with your tree at the moment, I'll follow up
 with the expected resolutions to make it easier for you.
 
 Other than the debugfs cleanups, in this set of changes we have:
 	- bus iteration function cleanups (will cause build warnings
 	  with s390 and coresight drivers in your tree)
 	- scripts/get_abi.pl tool to display and parse Documentation/ABI
 	  entries in a simple way
 	- cleanups to Documenatation/ABI/ entries to make them parse
 	  easier due to typos and other minor things
 	- default_attrs use for some ktype users
 	- driver model documentation file conversions to .rst
 	- compressed firmware file loading
 	- deferred probe fixes
 
 All of these have been in linux-next for a while, with a bunch of merge
 issues that Stephen has been patient with me for.  Other than the merge
 issues, functionality is working properly in linux-next :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K
 LpRyb3zX29oChFaZkc5a
 =XrEZ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs updates from Greg KH:
 "Here is the "big" driver core and debugfs changes for 5.3-rc1

  It's a lot of different patches, all across the tree due to some api
  changes and lots of debugfs cleanups.

  Other than the debugfs cleanups, in this set of changes we have:

   - bus iteration function cleanups

   - scripts/get_abi.pl tool to display and parse Documentation/ABI
     entries in a simple way

   - cleanups to Documenatation/ABI/ entries to make them parse easier
     due to typos and other minor things

   - default_attrs use for some ktype users

   - driver model documentation file conversions to .rst

   - compressed firmware file loading

   - deferred probe fixes

  All of these have been in linux-next for a while, with a bunch of
  merge issues that Stephen has been patient with me for"

* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
  debugfs: make error message a bit more verbose
  orangefs: fix build warning from debugfs cleanup patch
  ubifs: fix build warning after debugfs cleanup patch
  driver: core: Allow subsystems to continue deferring probe
  drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
  arch_topology: Remove error messages on out-of-memory conditions
  lib: notifier-error-inject: no need to check return value of debugfs_create functions
  swiotlb: no need to check return value of debugfs_create functions
  ceph: no need to check return value of debugfs_create functions
  sunrpc: no need to check return value of debugfs_create functions
  ubifs: no need to check return value of debugfs_create functions
  orangefs: no need to check return value of debugfs_create functions
  nfsd: no need to check return value of debugfs_create functions
  lib: 842: no need to check return value of debugfs_create functions
  debugfs: provide pr_fmt() macro
  debugfs: log errors when something goes wrong
  drivers: s390/cio: Fix compilation warning about const qualifiers
  drivers: Add generic helper to match by of_node
  driver_find_device: Unify the match function with class_find_device()
  bus_find_device: Unify the match callback with class_find_device
  ...
2019-07-12 12:24:03 -07:00
Linus Torvalds
97ff4ca46d Char / Misc driver patches for 5.3-rc1
Here is the "large" pull request for char and misc and other assorted
 smaller driver subsystems for 5.3-rc1.
 
 It seems that this tree is becoming the funnel point of lots of smaller
 driver subsystems, which is fine for me, but that's why it is getting
 larger over time and does not just contain stuff under drivers/char/ and
 drivers/misc.
 
 Lots of small updates all over the place here from different driver
 subsystems:
   - habana driver updates
   - coresight driver updates
   - documentation file movements and updates
   - Android binder fixes and updates
   - extcon driver updates
   - google firmware driver updates
   - fsi driver updates
   - smaller misc and char driver updates
   - soundwire driver updates
   - nvmem driver updates
   - w1 driver fixes
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXmoQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylV9wCgyJGbpPch8v/ecrZGFHYS4sIMexIAoMco3zf6
 wnqFmXiz1O0tyo1sgV9R
 =7sqO
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the "large" pull request for char and misc and other assorted
  smaller driver subsystems for 5.3-rc1.

  It seems that this tree is becoming the funnel point of lots of
  smaller driver subsystems, which is fine for me, but that's why it is
  getting larger over time and does not just contain stuff under
  drivers/char/ and drivers/misc.

  Lots of small updates all over the place here from different driver
  subsystems:
   - habana driver updates
   - coresight driver updates
   - documentation file movements and updates
   - Android binder fixes and updates
   - extcon driver updates
   - google firmware driver updates
   - fsi driver updates
   - smaller misc and char driver updates
   - soundwire driver updates
   - nvmem driver updates
   - w1 driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (188 commits)
  coresight: Do not default to CPU0 for missing CPU phandle
  dt-bindings: coresight: Change CPU phandle to required property
  ocxl: Allow contexts to be attached with a NULL mm
  fsi: sbefifo: Don't fail operations when in SBE IPL state
  coresight: tmc: Smatch: Fix potential NULL pointer dereference
  coresight: etm3x: Smatch: Fix potential NULL pointer dereference
  coresight: Potential uninitialized variable in probe()
  coresight: etb10: Do not call smp_processor_id from preemptible
  coresight: tmc-etf: Do not call smp_processor_id from preemptible
  coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible
  coresight: tmc-etr: Do not call smp_processor_id() from preemptible
  docs: misc-devices: convert files without extension to ReST
  fpga: dfl: fme: align PR buffer size per PR datawidth
  fpga: dfl: fme: remove copy_to_user() in ioctl for PR
  fpga: dfl-fme-mgr: fix FME_PR_INTFC_ID register address.
  intel_th: msu: Start read iterator from a non-empty window
  intel_th: msu: Split sgt array and pointer in multiwindow mode
  intel_th: msu: Support multipage blocks
  intel_th: pci: Add Ice Lake NNPI support
  intel_th: msu: Fix single mode with disabled IOMMU
  ...
2019-07-11 15:34:05 -07:00
Arnd Bergmann
b80d6a42bd ACPI: blacklist: fix clang warning for unused DMI table
When CONFIG_DMI is disabled, we only have a tentative declaration,
which causes a warning from clang:

drivers/acpi/blacklist.c:20:35: error: tentative array definition assumed to have one element [-Werror]
static const struct dmi_system_id acpi_rev_dmi_table[] __initconst;

As the variable is not actually used here, hide it entirely
in an #ifdef to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11 22:45:00 +02:00
Erik Schmauss
d1fb5b2f62 ACPICA: Update table load object initialization
ACPICA commit c7ef9f3526765bed8930825dda1eed1a274b9668

Use the common internal "initialize objects" interface
Affects:
Load()
load_table()
acpi_load_table

Link: https://github.com/acpica/acpica/commit/c7ef9f35
Tested-by: Rong Chen <rong.a.chen@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-11 22:38:42 +02:00
Linus Torvalds
a131c2bf16 ACPI fix for 5.3-rc1
Revert a recent ACPICA commit causing systems to hang at boot time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0lwQwSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxnFoQAK5jh19eRn70Emh16GVXelmAhcVSl2mN
 KD1G13hIjrBgs0uDLY1jeYZuCncVCJTNpL4PnXsPHH+1wnQ/78Nq9H06dPjRVClI
 NrzwQ9J175RchPtp/HeBU1g4H+gnnm9BYF0KWjfiqYrGO/a6VfUYWOCduRfKKQnw
 pf/MtoxSR/hyCOdgKlNjmpabNxFA2cOT1VEViAbseMOfubCs3LfWo8GVTMusn3oI
 EQ2wqlktcqiUTe8IFnrMQEzE9EfneBcd/FvUqqOJZZ6lkPPrwEENwtMMILSOcUZ1
 zo16xsE5oZWd5b4cLNV1jaE3AF+yxzvm4yhNKPfBXiGTAlGp1XQGR3zYvW54TtiF
 khcfA8h4a1Upr9FbC1aPHWRtO0ctW+E6eoy/wgrcWkk83pWIgbwpjehOIH+2in8G
 u3757IrRw/ZFz+SlV/1SA2rgLUKzzL+lDDvkTyadCgF1OHoZcvphUpEQt32sQ+pq
 qyeM8FQ32Lxc6x9/Fnd9qOQmJAj5T6ByMpJcFiRaFt/VstZFcK1hEq+3qRhDoSq6
 cL5SFACE3pKqZX/ShBXUF97R59jabT91nY7BItDweuBKS9gz81/t1Rgdu48ApdZt
 bd73oBNXPulcQ1LHp7Q3Gl9BltwfPFoIBfa19THzQIG+rHhp/FgoKm5vun7yBGIj
 hFgiNWBPKBaX
 =+G0G
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Revert a recent ACPICA commit causing systems to hang at boot time"

* tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPICA: Update table load object initialization"
2019-07-11 11:17:09 -07:00
Rafael J. Wysocki
6cf7fb5a95 Revert "ACPICA: Update table load object initialization"
Revert commit c522ad0637 ("ACPICA: Update table load object
initialization") as it causes systems to hang on attempts to load
OEM ACPI tables.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-10 11:52:50 +02:00
Linus Torvalds
e9a83bd232 It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro.  These create more
    than the usual number of simple but annoying merge conflicts with other
    trees, unfortunately.  He has a lot more of these waiting on the wings
    that, I think, will go to you directly later on.
 
  - A new document on how to use merges and rebases in kernel repos, and one
    on Spectre vulnerabilities.
 
  - Various improvements to the build system, including automatic markup of
    function() references because some people, for reasons I will never
    understand, were of the opinion that :c:func:``function()`` is
    unattractive and not fun to type.
 
  - We now recommend using sphinx 1.7, but still support back to 1.4.
 
  - Lots of smaller improvements, warning fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
 gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
 raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
 3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
 DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
 dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
 =D0eO
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
2019-07-09 12:34:26 -07:00
Linus Torvalds
0415052db4 Device properties framework updates for 5.3-rc1
- Add helpers to count items in a property array (Andy Shevchenko).
 
  - Extend "software nodes" support to be more convenient for
    representing device properties supplied by drivers (Heikki
    Krogerus).
 
  - Add device_find_child_by_name() helper to the driver core (Heikki
    Krogerus).
 
  - Extend device connection code to also look for references provided
    via fwnode pointers (Heikki Krogerus).
 
  - Start to register proper struct device objects for USB Type-C
    muxes and orientation switches (Heikki Krogerus).
 
  - Update the intel_cht_int33fe driver to describe devices in a more
    general way with the help of "software nodes" (Heikki Krogerus).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jLKMSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxJIUQAJ7vJ9CVPzcFK8S6FkDD1nNUbZqnHhpe
 v9u2e347Wb5TyxWrzdgzBWw3JmJsi78kO8R82fJSZgkaqTWsxWxbPH6K+OSU0gxB
 lU8A5opk/P8ChAEGz0hCIXVYgTWRlgETQnAsUspoPPw/9ypxY/lZJ2P3QIvDsn6Q
 wsfFEdshHXrqOzWg5XxWVMogUhrDm2us/xs1HC6eWcmABggrf3m6cr/KxABZK5Hx
 PIhIRJT8BN5e9wB2dKNcxNoz0XLem2pW2EN1vHHEVwSbxJE45yJqiz4cXRxHYwrT
 GCXDYUcwiwtScvXRfl4Ihm8E1+hDczGW0FUR0A2Y9QB15zWvJy8ff1GlHhbROoSV
 3T48xu6iAWuz9/i6BrJSZ9C1hya867v/S8ccBEnHRTtJwqSEHRBmzyINbxqtcENe
 LY4cGcZAjkDnWOXz7cHbM4uXwn+XYQHCbi+bkHWXEEKRqx6LWFOaGoSR6XlqRBrA
 H/RSg38GU7KTCLun/YLezuwbT08lvDoere9B3psxNW2XW7ufjL5DSnxRFm0hdBMv
 zWMAi/6a6yr1hpUyCXZTlnEYI7Hqx3dDTinQe8x8BeJ2CRUnFqmH+1Y0ihd8vCvf
 2k9tS2WAt72dFOckwwWOX9xEQIHGInkDWUx8MHbEuTtW7R61NTdCiYR/xxZhkTOr
 aB3xFjSGAv87
 =jOFk
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "These add helpers for counting items in a property array and extend
  the "software nodes" support to be more convenient for representing
  device properties supplied by drivers and make the intel_cht_int33fe
  driver use that.

  Specifics:

   - Add helpers to count items in a property array (Andy Shevchenko).

   - Extend "software nodes" support to be more convenient for
     representing device properties supplied by drivers (Heikki
     Krogerus).

   - Add device_find_child_by_name() helper to the driver core (Heikki
     Krogerus).

   - Extend device connection code to also look for references provided
     via fwnode pointers (Heikki Krogerus).

   - Start to register proper struct device objects for USB Type-C muxes
     and orientation switches (Heikki Krogerus).

   - Update the intel_cht_int33fe driver to describe devices in a more
     general way with the help of "software nodes" (Heikki Krogerus)"

* tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Add helpers to count items in an array
  platform/x86: intel_cht_int33fe: Replacing the old connections with references
  platform/x86: intel_cht_int33fe: Supply fwnodes for the external dependencies
  platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector
  platform/x86: intel_cht_int33fe: Provide software nodes for the devices
  platform/x86: intel_cht_int33fe: Remove unused fusb302 device property
  platform/x86: intel_cht_int33fe: Register max17047 in its own function
  usb: typec: Registering real device entries for the muxes
  device connection: Find connections also by checking the references
  device property: Introduce fwnode_find_reference()
  ACPI / property: Don't limit named child node matching to data nodes
  driver core: Add helper device_find_child_by_name()
  software node: Add software_node_get_reference_args()
  software node: Use kobject name when finding child nodes by name
  software node: Add support for static node descriptors
  software node: Simplify software_node_release() function
  software node: Allow node creation without properties
2019-07-09 10:28:47 -07:00
Linus Torvalds
4b4704520d ACPI updates for 5.3-rc1
- Update the ACPICA code in the kernel to upstream revision 20190703
    including:
    * Initial/defalut namespace creation simplification (Bob Moore).
    * Object initialization sequence update (Bob Moore).
    * Removal of legacy module-level (dead) code (Erik Schmauss).
    * Table load object initialization update (Erik Schmauss, Nikolaus
      Voss).
 
  - Fix GPE enabling issue in ACPICA causing premature wakeups from
    suspend-to-idle to occur (Rafael Wysocki).
 
  - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
    Biesheuvel).
 
  - Fix address space handler removal in the ACPI PMIC driver for
    Intel platforms (Andy Shevchenko).
 
  - Allow BGRT to be overridden via initrd or configfs (Andrea Oliveri).
 
  - Fix object resolution on table loads via configfs (Nikolaus Voss).
 
  - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
    Liguang Zhang, Masahiro Yamada).
 
  - Fix documentation build warning, convert the extcon document to
    ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
    Qian Cai).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jLCoSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxbV4P/18Kt/la5KUvOMVOXXIEPes5lEbhQ8m1
 BBhRcHOh9GDNXlXkogJSssKo5GlHXBBtN5ipMMFnwyi/gK2V1834nwXG3+gjuUoE
 Q9zHTBQDBybBCDDj/EjZeF+AuTMRbeW2bV80+4LgQ2oAQCK5TOG873K1U9iAYTBs
 +7KaquWcZKPEzZb6RvaH0+2T/Ihg35Hqutlyp2ly1+h8SzYDwJui4SQwsh0BPrml
 ujMveW2dbVsoOsAFJJw3ATsejBeNmaBfK6VtJnBF4eeeCQKfI0auz+OTht22+4gR
 NX+Q5/XZdFti7m60fVEc78yhNp2BPCHbR8UNnx3rKpjiVkh8yPG7B4KTgmOwpREW
 0BMzGSJIwCkoK89Abf3+NqEk77hEDVljgqLTYAIfKnFmO6SL1OH3bQERFducEp/L
 ncBQOMz8FOYAJIbNFTIHA7w/5XYtFsAk+grJMPXiZKi/hOFn4YyuR/8qDNwLq3R9
 +g1ggqCPzDrJQ7IiKJ8pwS+kJP2jlp/u7JdWzKJl8FaCtxfk2I6TGQtM/MOR5JJj
 tup2v8I8c8ROnv/0aa6jqKYHS+w84xXAjb54BdgGCaU5Oz2Ainoyp0Aa0BVIpjSu
 vx9CSF74s9aP7lY8TwAXy7njLz18VNnocQn9zksfl5hJncNCgYOv96mtgeqHsuo6
 E811ArtdcHRR
 =4FCz
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20190703, fix up the handling of GPEs in ACPICA, allow some more ACPI
  code to be built on ARM64 platforms, allow BGRT to be overridden, fix
  minor issues and clean up assorted pieces of ACPI code.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190703
     including:
       - Initial/default namespace creation simplification (Bob Moore).
       - Object initialization sequence update (Bob Moore).
       - Removal of legacy module-level (dead) code (Erik Schmauss).
       - Table load object initialization update (Erik Schmauss,
         Nikolaus Voss).

   - Fix GPE enabling issue in ACPICA causing premature wakeups from
     suspend-to-idle to occur (Rafael Wysocki).

   - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
     Biesheuvel).

   - Fix address space handler removal in the ACPI PMIC driver for Intel
     platforms (Andy Shevchenko).

   - Allow BGRT to be overridden via initrd or configfs (Andrea
     Oliveri).

   - Fix object resolution on table loads via configfs (Nikolaus Voss).

   - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
     Liguang Zhang, Masahiro Yamada).

   - Fix documentation build warning, convert the extcon document to
     ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
     Qian Cai)"

* tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / APEI: Remove needless __ghes_check_estatus() calls
  ACPICA: Update version to 20190703
  ACPICA: Update table load object initialization
  ACPICA: Update for object initialization sequence
  ACPICA: remove legacy module-level code due to deprecation
  ACPICA: Namespace: simplify creation of the initial/default namespace
  ACPI / PMIC: intel: Drop double removal of address space handler
  ACPI: APD: remove redundant assignment to pointer clk
  docs: extcon: convert it to ReST and move to ACPI dir
  ACPI: Make AC and battery drivers available on !X86
  ACPICA: Clear status of GPEs on first direct enable
  ACPI: configfs: Resolve objects on host-directed table loads
  ACPI: tables: Allow BGRT to be overridden
  ACPI: OSL: Make a W=1 kernel-doc warning go away
  ACPI: tools: Exclude tools/* from .gitignore patterns
2019-07-09 10:21:39 -07:00
Linus Torvalds
cf2d213e49 Power management updates for 5.3-rc1
- Improve the handling of shared ACPI power resources in the PCI
    bus type layer (Mika Westerberg).
 
  - Make the PCI layer take link delays required by the PCIe spec
    into account as appropriate and avoid polling devices in D3cold
    for PME (Mika Westerberg).
 
  - Fix some corner case issues in ACPI device power management and
    in the PCI bus type layer, optimiza and clean up the handling of
    runtime-suspended PCI devices during system-wide transitions to
    sleep states (Rafael Wysocki).
 
  - Rework hibernation handling in the ACPI core and the PCI bus type
    to resume runtime-suspended devices before hibernation (which
    allows some functional problems to be avoided) and fix some ACPI
    power management issues related to hiberation (Rafael Wysocki).
 
  - Extend the operating performance points (OPP) framework to support
    a wider range of devices (Rajendra Nayak, Stehpen Boyd).
 
  - Fix issues related to genpd_virt_devs and issues with platforms
    using the set_opp() callback in the OPP framework (Viresh Kumar,
    Dmitry Osipenko).
 
  - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
 
  - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
 
  - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210,
    and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli,
    Paweł Chmiel, YueHaibing).
 
  - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
 
  - Fix minor issue in the ACPI system sleep support code and export
    one function from it (Lenny Szubowicz, Dexuan Cui).
 
  - Clean up assorted pieces of PM code and documentation (Kefeng Wang,
    Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
    Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
 
  - Update the pm-graph utility to v5.4 (Todd Brandt).
 
  - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jK18SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgEAP/RbPe71Y9ufKu64L3EtgV6mS9iuLEhux
 /Ad9laLNeM1b0oceT3QxGk7xQCacnZcBlcaqXVWI4NRsn4RBZp1cYZngpgJ9DP6E
 ONr8hzyzDOMVReba3XJIF8H+WoTKjywMYtFutjdx6dRe2ZJLutqnuZ0JbH1YSSK7
 IxOt0mJVALf2M4Zz7F17d+n3yGE/4xAPBVbj/rBRcTEsGYlR/Hoxs7iF6EBau7fy
 R5drUH6XSrWk8adc+z7l3BTGqMMYj9deRSfAWB3wpM4YK7Fv7msX/amBoGINkdn6
 xP/ZcrHvhKKzE89MS8OUGP4rGVwq+7tu6mktnYL/tpKgutJqqx5LVvrLsGDSWr+W
 /aJExN8Eb4Jh98C6vog3XUJoqBxkVGbU8qoCBU3jlFsaznFEWjW9IKhBHs5CIaqz
 MXte6AsJ8lvFzxILjvx0m2206wNpRJRXYLX3a/BSBxa4OgOESjIpBTmbPfOwbxwj
 8z9hIVlDTTDtnF6BEyDQr1fjPi3Mxl7ibGnoqRrJm36VKBy9VZNNwG/0Y2oSvm6k
 Es8CiTWA3A/46dCZxGr18/9Vbfxn1Yvg9QZ1lCE5Fqij+0F2yRApbHZgUro+1rji
 6J8OWC5r5JccdKuGHh4RH/asMFhD0cAR/gUsRzS4dz/wz2jVIN1FstdD1aKN5GBy
 d0lchx/AKR5H
 =aBN3
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update PCI and ACPI power management (improved handling of ACPI
  power resources and PCIe link delays, fixes related to corner cases,
  hibernation handling rework), fix and extend the operating performance
  points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
  imx8m chips, update some other cpufreq drivers, clean up assorted
  pieces of PM code and documentation and update tools.

  Specifics:

   - Improve the handling of shared ACPI power resources in the PCI bus
     type layer (Mika Westerberg).

   - Make the PCI layer take link delays required by the PCIe spec into
     account as appropriate and avoid polling devices in D3cold for PME
     (Mika Westerberg).

   - Fix some corner case issues in ACPI device power management and in
     the PCI bus type layer, optimiza and clean up the handling of
     runtime-suspended PCI devices during system-wide transitions to
     sleep states (Rafael Wysocki).

   - Rework hibernation handling in the ACPI core and the PCI bus type
     to resume runtime-suspended devices before hibernation (which
     allows some functional problems to be avoided) and fix some ACPI
     power management issues related to hiberation (Rafael Wysocki).

   - Extend the operating performance points (OPP) framework to support
     a wider range of devices (Rajendra Nayak, Stehpen Boyd).

   - Fix issues related to genpd_virt_devs and issues with platforms
     using the set_opp() callback in the OPP framework (Viresh Kumar,
     Dmitry Osipenko).

   - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).

   - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).

   - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
     armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
     Chmiel, YueHaibing).

   - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).

   - Fix minor issue in the ACPI system sleep support code and export
     one function from it (Lenny Szubowicz, Dexuan Cui).

   - Clean up assorted pieces of PM code and documentation (Kefeng Wang,
     Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
     Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).

   - Update the pm-graph utility to v5.4 (Todd Brandt).

   - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"

* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Unexport acpi_device_get_power()
  Documentation: ABI: power: Add missing newline at end of file
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
  cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  cpufreq: Don't skip frequency validation for has_target() drivers
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  cpufreq: Use has_target() instead of !setpolicy
  ...
2019-07-09 10:05:22 -07:00
Linus Torvalds
13324c42c1 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Thomas Gleixner:
 "Updates for x86 CPU features:

   - Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR
     instructions in user space to save power e.g. in HPC workloads
     which spin wait on synchronization points.

     The maximum time a MWAIT can halt in userspace is controlled by the
     kernel and can be adjusted by the sysadmin.

   - Speed up the MTRR handling code on CPUs which support cache
     self-snooping correctly.

     On those CPUs the wbinvd() invocations can be omitted which speeds
     up the MTRR setup by a factor of 50.

   - Support for the new x86 vendor Zhaoxin who develops processors
     based on the VIA Centaur technology.

   - Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs
     by sending IPIs to retrieve the CPU frequency and use the cached
     values instead.

   - The addition and late revert of the FSGSBASE support. The revert
     was required as it turned out that the code still has hard to
     diagnose issues. Yet another engineering trainwreck...

   - Small fixes, cleanups, improvements and the usual new Intel CPU
     family/model addons"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  x86/fsgsbase: Revert FSGSBASE support
  selftests/x86/fsgsbase: Fix some test case bugs
  x86/entry/64: Fix and clean up paranoid_exit
  x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled
  selftests/x86: Test SYSCALL and SYSENTER manually with TF set
  x86/mtrr: Skip cache flushes on CPUs with cache self-snooping
  x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata
  Documentation/ABI: Document umwait control sysfs interfaces
  x86/umwait: Add sysfs interface to control umwait maximum time
  x86/umwait: Add sysfs interface to control umwait C0.2 state
  x86/umwait: Initialize umwait control values
  x86/cpufeatures: Enumerate user wait instructions
  x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs
  x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3
  ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
  x86/cpu: Create Zhaoxin processors architecture support file
  x86/cpu: Split Tremont based Atoms from the rest
  Documentation/x86/64: Add documentation for GS/FS addressing mode
  x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
  x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
  ...
2019-07-08 11:59:59 -07:00
Linus Torvalds
2a1ccd3142 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement provides the usual mixed bag:

  Core:

   - Further improvements to the irq timings code which aims to predict
     the next interrupt for power state selection to achieve better
     latency/power balance

   - Add interrupt statistics to the core NMI handlers

   - The usual small fixes and cleanups

  Drivers:

   - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
     Amazon Gravition AMR/GIC interrupt controllers.

   - Rework of the Renesas INTC controller driver

   - ACPI support for Socionext SoCs

   - Enhancements to the CSKY interrupt controller

   - The usual small fixes and cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  irq/irqdomain: Fix comment typo
  genirq: Update irq stats from NMI handlers
  irqchip/gic-pm: Remove PM_CLK dependency
  irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
  dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
  softirq: Use __this_cpu_write() in takeover_tasklets()
  irqchip/mbigen: Stop printing kernel addresses
  irqchip/gic: Add dependency for ARM_GIC_MAX_NR
  genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
  genirq/timings: Add selftest for next event computation
  genirq/timings: Add selftest for irqs circular buffer
  genirq/timings: Add selftest for circular array
  genirq/timings: Encapsulate storing function
  genirq/timings: Encapsulate timings push
  genirq/timings: Optimize the period detection speed
  genirq/timings: Fix timings buffer inspection
  genirq/timings: Fix next event index function
  irqchip/qcom: Use struct_size() in devm_kzalloc()
  irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
  dt-bindings: interrupt-controller: Update csky mpintc
  ...
2019-07-08 11:01:13 -07:00
Linus Torvalds
dfd437a257 arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
 
 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly
 
 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)
 
 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
   and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)
 
 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)
 
 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic
 
 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms
 
 - perf: DDR performance monitor support for iMX8QXP
 
 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers
 
 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent
 
 - arm64 do_page_fault() and hugetlb cleanups
 
 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
 
 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
   introduced in 5.1)
 
 - CONFIG_RANDOMIZE_BASE now enabled in defconfig
 
 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area
 
 - Make ZONE_DMA32 configurable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
 XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
 fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
 gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
 w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
 Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
 KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
 eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
 o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
 lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
 7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
 tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
 =0TDT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...
2019-07-08 09:54:55 -07:00
Rafael J. Wysocki
64372c0b7d Merge branches 'acpi-apei', 'acpi-doc' and 'acpi-soc'
* acpi-apei:
  ACPI / APEI: Remove needless __ghes_check_estatus() calls

* acpi-doc:
  docs: extcon: convert it to ReST and move to ACPI dir

* acpi-soc:
  ACPI: APD: remove redundant assignment to pointer clk
2019-07-08 11:04:14 +02:00
Rafael J. Wysocki
62fd33d3f5 Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20190703
  ACPICA: Update table load object initialization
  ACPICA: Update for object initialization sequence
  ACPICA: remove legacy module-level code due to deprecation
  ACPICA: Namespace: simplify creation of the initial/default namespace
  ACPICA: Clear status of GPEs on first direct enable
2019-07-08 11:04:00 +02:00
Rafael J. Wysocki
8ca572ec3c Merge branches 'acpi-tables', 'acpi-osl', 'acpi-misc' and 'acpi-tools'
* acpi-tables:
  ACPI: configfs: Resolve objects on host-directed table loads
  ACPI: tables: Allow BGRT to be overridden

* acpi-osl:
  ACPI: OSL: Make a W=1 kernel-doc warning go away

* acpi-misc:
  ACPI: Make AC and battery drivers available on !X86

* acpi-tools:
  ACPI: tools: Exclude tools/* from .gitignore patterns
2019-07-08 11:02:22 +02:00
Rafael J. Wysocki
3dbeb44854 Merge branch 'pm-sleep'
* pm-sleep:
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  PM: sleep: Update struct wakeup_source documentation
  drivers: base: power: remove wakeup_sources_stats_dentry variable
  PM: suspend: Rename pm_suspend_via_s2idle()
  PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take
  PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
2019-07-08 10:51:25 +02:00
Rafael J. Wysocki
50e163d43a Merge branches 'acpi-pm' and 'pm-pci'
* acpi-pm:
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
  ACPI / LPIT: Correct LPIT end address for lpit_process()

* pm-pci:
  ACPI: PM: Unexport acpi_device_get_power()
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  PCI: Do not poll for PME if the device is in D3cold
  PCI: Add missing link delays required by the PCIe spec
  PCI: PM: Replace pci_dev_keep_suspended() with two functions
  PCI: PM: Avoid resuming devices in D3hot during system suspend
2019-07-08 10:49:36 +02:00
Dexuan Cui
ad5a449b70 ACPI: PM: Make acpi_sleep_state_supported() non-static
With some upcoming patches to save/restore the Hyper-V drivers related
states, a Linux VM running on Hyper-V will be able to hibernate. When
a Linux VM hibernates, unluckily we must disable the memory hot-add/remove
and balloon up/down capabilities in the hv_balloon driver
(drivers/hv/hv_balloon.c), because these can not really work according to
the design of the related back-end driver on the host.

By default, Hyper-V does not enable the virtual ACPI S4 state for a VM;
on recent Hyper-V hosts, the administrator is able to enable the virtual
ACPI S4 state for a VM, so we hope to use the presence of the virtual ACPI
S4 state as a hint for hv_balloon to disable the aforementioned
capabilities. In this way, hibernation will work more reliably, from the
user's perspective.

By marking acpi_sleep_state_supported() non-static, we'll be able to
implement a hv_is_hibernation_supported() API in the always-built-in
module arch/x86/hyperv/hv_init.c, and the API will be called by hv_balloon.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-06 09:49:22 +02:00
Pankaj Gupta
c5d4355d10 libnvdimm: nd_region flush callback support
This patch adds functionality to perform flush from guest
to host over VIRTIO. We are registering a callback based
on 'nd_region' type. virtio_pmem driver requires this special
flush function. For rest of the region types we are registering
existing flush function. Report error returned by host fsync
failure to userspace.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-05 15:19:10 -07:00
Liguang Zhang
371b86897d ACPI / APEI: Remove needless __ghes_check_estatus() calls
Function __ghes_check_estatus() is always called after
__ghes_peek_estatus(), but it is already called in __ghes_peek_estatus().
So we should remove some needless __ghes_check_estatus() calls.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-05 01:23:11 +02:00
Rafael J. Wysocki
9ed411c06d ACPI: PM: Unexport acpi_device_get_power()
Using acpi_device_get_power() outside of ACPI device initialization
and ACPI sysfs is problematic due to the way in which power resources
are handled by it, so unexport it and add a paragraph explaining the
pitfalls to its kerneldoc comment.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-04 10:49:57 +02:00
Erik Schmauss
c522ad0637 ACPICA: Update table load object initialization
ACPICA commit c7ef9f3526765bed8930825dda1eed1a274b9668

Use the common internal "initialize objects" interface
Affects:
 Load()
 load_table()
 acpi_load_table

Link: https://github.com/acpica/acpica/commit/c7ef9f35
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-04 00:59:43 +02:00
Bob Moore
86a33cf3b6 ACPICA: Update for object initialization sequence
ACPICA commit 106c72a97f5ca972f29956e5e9a0429b8c4a2723

 1) Do not allow the objects to be initialized twice
 2) Only package objects require a deferred initialization
 3) Cleanup initialization output

Link: https://github.com/acpica/acpica/commit/106c72a9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-04 00:59:43 +02:00
Erik Schmauss
8894f52a14 ACPICA: remove legacy module-level code due to deprecation
ACPICA commit 1ca34b1a7b960ef321eae5dcddfff77707c88aef

There have been several places that have been calling functions
regarding module level code blocks. This change removes all old
vestiges in the codebase. This is dead code.

Link: https://github.com/acpica/acpica/commit/1ca34b1a
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-04 00:59:43 +02:00
Bob Moore
f79c8e4136 ACPICA: Namespace: simplify creation of the initial/default namespace
ACPICA commit 76658f55d8cc498a763bdb92f8e0d934822a129c

For the objects that are created by default (_GPE, _SB_, etc)
there is no need to use the heavyweight ns_lookup function.
Instead, simply create each object and link it in as the namespace
is built.

Link: https://github.com/acpica/acpica/commit/76658f55
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-04 00:59:43 +02:00
Rafael J. Wysocki
d4ca763eed Merge ACPI tables handling changes for v5.3. 2019-07-04 00:59:15 +02:00
Andy Shevchenko
417a564c65 ACPI / PMIC: intel: Drop double removal of address space handler
There is no need to remove address space handler twice,
because removal is idempotent.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03 13:03:41 +02:00
Colin Ian King
b244883ca8 ACPI: APD: remove redundant assignment to pointer clk
The pointer clk is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-03 13:02:16 +02:00
Rafael J. Wysocki
c95b7595f8 ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
In general, it is not correct to call pm_generic_suspend(),
pm_generic_suspend_late() and pm_generic_suspend_noirq() during the
hibernation's "poweroff" transition, because device drivers may
provide special callbacks to be invoked then and the wrappers in
question cause system suspend callbacks to be run.  Unfortunately,
that happens in the ACPI PM domain and ACPI LPSS.

To address this potential issue, introduce "poweroff" callbacks
for the ACPI PM and LPSS that will use pm_generic_poweroff(),
pm_generic_poweroff_late() and pm_generic_poweroff_noirq() as
appropriate.

Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
3cd7957e85 ACPI: PM: Simplify and fix PM domain hibernation callbacks
First, after a previous change causing all runtime-suspended devices
in the ACPI PM domain (and ACPI LPSS devices) to be resumed before
creating a snapshot image of memory during hibernation, it is not
necessary to worry about the case in which them might be left in
runtime-suspend any more, so get rid of the code related to that from
ACPI PM domain and ACPI LPSS hibernation callbacks.

Second, it is not correct to use pm_generic_resume_early() and
acpi_subsys_resume_noirq() in hibernation "restore" callbacks (which
currently happens in the ACPI PM domain and ACPI LPSS), so introduce
proper _restore_late and _restore_noirq callbacks for the ACPI PM
domain and ACPI LPSS.

Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
501debd4aa PM: ACPI/PCI: Resume all devices during hibernation
Both the PCI bus type and the ACPI PM domain avoid resuming
runtime-suspended devices with DPM_FLAG_SMART_SUSPEND set during
hibernation (before creating the snapshot image of system memory),
but that turns out to be a mistake.  It leads to functional issues
and adds complexity that's hard to justify.

For this reason, resume all runtime-suspended PCI devices and all
devices in the ACPI PM domains before creating a snapshot image of
system memory during hibernation.

Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Link: https://lore.kernel.org/linux-acpi/917d4399-2e22-67b1-9d54-808561f9083f@uwyo.edu/T/#maf065fe6e4974f2a9d79f332ab99dfaba635f64c
Reported-by: Robert R. Howell <RHowell@uwyo.edu>
Tested-by: Robert R. Howell <RHowell@uwyo.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
28ad4b4e34 Merge back PCI power management material for v5.3. 2019-06-30 13:41:52 +02:00
Jeremy Linton
56855a99f3 ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI 6.3 adds a flag to indicate that child nodes are all
identical cores. This is useful to authoritatively determine
if a set of (possibly offline) cores are identical or not.

Since the flag doesn't give us a unique id we can generate
one and use it to create bitmaps of sibling nodes, or simply
in a loop to determine if a subset of cores are identical.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-06-27 16:53:18 +01:00
Jeremy Linton
ed2b664fcc ACPI/PPTT: Modify node flag detection to find last IDENTICAL
The ACPI specification implies that the IDENTICAL flag should be
set on all non leaf nodes where the children are identical.
This means that we need to be searching for the last node with
the identical flag set rather than the first one.

Since this flag is also dependent on the table revision, we
need to add a bit of extra code to verify the table revision,
and the next node's state in the traversal. Since we want to
avoid function pointers here, lets just special case
the IDENTICAL flag.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-06-27 16:52:13 +01:00
Mika Westerberg
4533771c1e ACPI / PM: Introduce concept of a _PR0 dependent device
If there are shared power resources between otherwise unrelated devices
turning them on causes the other devices sharing them to be powered up
as well. In case of PCI devices go into D0uninitialized state meaning
that if they were configured to trigger wake that configuration is lost
at this point.

For this reason introduce a concept of "_PR0 dependent device" that can
be added to any ACPI device that has power resources. The dependent
device will be included in a list of dependent devices for all power
resources returned by the ACPI device's _PR0 (assuming it has one).
Whenever a power resource having dependent devices is turned physically
on (its _ON method is called) we runtime resume all of them to allow
their driver or in case of PCI the PCI core to re-initialize the device
and its wake configuration.

This adds two functions that can be used to add and remove these
dependent devices. Note the dependent device does not necessary need
share power resources so this functionality can be used to add "software
dependencies" as well if needed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-27 12:31:57 +02:00
Rafael J. Wysocki
f850a48a07 ACPI: PM: Allow transitions to D0 to occur in special cases
If a device with ACPI PM is left in D0 during a system-wide
transition to the S3 (suspend-to-RAM) or S4 (hibernation) sleep
state, the actual state of the device need not be D0 during resume
from it, although its power.state value will still reflect D0 (that
is, the power state from before the system-wide transition).

In that case, the acpi_device_set_power() call made to ensure that
the power state of the device will be D0 going forward has no effect,
because the new state (D0) is equal to the one reflected by the
device's power.state value.  That does not affect power resources,
which are taken care of by acpi_resume_power_resources() called from
acpi_pm_finish() during resume from system-wide sleep states, but it
still may be necessary to invoke _PS0 for the device on top of that
in order to finalize its transition to D0.

For this reason, modify acpi_device_set_power() to allow transitions
to D0 to occur even if D0 is the current power state of the device
according to its power.state value.

That will not affect power resources, which are assumed to be in
the right configuration already (as reflected by the current values
of their reference counters), but it may cause _PS0 to be evaluated
for the device.  However, evaluating _PS0 for a device already in D0
may lead to confusion in general, so invoke _PSC (if present) to
check the device's current power state upfront and only evaluate
_PS0 for it if _PSC has returned a power state different from D0.
[If _PSC is not present or the evaluation of it fails, the power
state of the device is assumed to be D0 at this point.]

Fixes: 20dacb71ad (ACPI / PM: Rework device power management to follow ACPI 6)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-27 12:30:00 +02:00
Rafael J. Wysocki
21ba237926 ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
If the power state of a device with ACPI PM is changed from D3hot to
D3cold, it merely is a matter of dropping references to additional
power resources (specifically, those in the list returned by _PR3),
and the _PS3 method should not be invoked for the device then (as
it has already been evaluated during the previous transition to
D3hot).

Fixes: 20dacb71ad (ACPI / PM: Rework device power management to follow ACPI 6)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-27 12:29:59 +02:00
Suzuki K Poulose
418e3ea157 bus_find_device: Unify the match callback with class_find_device
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device().  If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward.  Also with that, constify
the "data" parameter as it is passed as a const to the match function.

For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24 05:22:31 +02:00
Suzuki K Poulose
e6374f6b2e acpi: utils: Cleanup acpi_dev_match_cb
The prototype of bus_find_device() will be unified with that of
class_find_device() subsequently, but for this purpose the callback
functions passed to it need to take (const void *) as the second
argument.  Consequently, they cannot modify the memory pointed to by
that argument which currently is not the case for acpi_dev_match_cb().
However, acpi_dev_match_cb() really need not modify the "match" object
passed to it, because acpi_dev_get_first_match_dev() which uses it via
bus_find_device() can easily convert the result of bus_find_device()
into the pointer to return.

For this reason, update acpi_dev_match_cb() to avoid the redundant
memory updates.

Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24 05:22:31 +02:00
Greg Kroah-Hartman
8083f3d788 Merge 5.2-rc6 into char-misc-next
We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-23 09:23:33 +02:00
Tony W Wang-oc
773b2f30a3 ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
Zhaoxin CPUs have NONSTOP TSC feature, so enable the ACPI
driver support for it.

Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "hpa@zytor.com" <hpa@zytor.com>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "rjw@rjwysocki.net" <rjw@rjwysocki.net>
Cc: "lenb@kernel.org" <lenb@kernel.org>
Cc: David Wang <DavidWang@zhaoxin.com>
Cc: "Cooper Yan(BJ-RD)" <CooperYan@zhaoxin.com>
Cc: "Qiyuan Wang(BJ-RD)" <QiyuanWang@zhaoxin.com>
Cc: "Herry Yang(BJ-RD)" <HerryYang@zhaoxin.com>
Link: https://lkml.kernel.org/r/d1cfd937dabc44518d42038b55522c53@zhaoxin.com
2019-06-22 11:45:57 +02:00
Ard Biesheuvel
fb683f47a9 ACPI: Make AC and battery drivers available on !X86
ACPI battery and AC devices can be found in arm64 laptops as well,
so drop the Kconfig dependency on X86 for their drivers.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-22 11:32:34 +02:00
Benjamin Herrenschmidt
a78cf9657b PCI/ACPI: Evaluate PCI Boot Configuration _DSM
Evaluate _DSM Function #5, the "PCI Boot Configuration" function.  If the
result is 0, the OS should preserve any resource assignments made by the
firmware.

Link: https://lore.kernel.org/r/20190615002359.29577-2-benh@kernel.crashing.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-06-21 18:11:53 -05:00
Suzuki K Poulose
1c20a213da coresight: acpi: Support for AMBA components
All AMBA devices are handled via ACPI AMBA scan notifier
infrastructure. The platform devices get the ACPI id
added to their driver.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-20 07:56:14 +02:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner
4c3dd9cd76 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 3 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081205.739216165@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:52 +02:00
Thomas Gleixner
7a338472f2 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482
Based on 1 normalized pattern(s):

  this work is licensed under the terms of the gnu gpl version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 48 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:52 +02:00
Thomas Gleixner
cb849fc5f0 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation the gpl this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  version 2 gplv2 for more details you should have received a copy of
  the gnu general public license version 2 gplv2 along with this
  source code

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 16 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:09 +02:00
Rafael J. Wysocki
44758bafa5 ACPICA: Clear status of GPEs on first direct enable
ACPI GPEs (other than the EC one) can be enabled in two situations.
First, the GPEs with existing _Lxx and _Exx methods are enabled
implicitly by ACPICA during system initialization.  Second, the
GPEs without these methods (like GPEs listed by _PRW objects for
wakeup devices) need to be enabled directly by the code that is
going to use them (e.g. ACPI power management or device drivers).

In the former case, if the status of a given GPE is set to start
with, its handler method (either _Lxx or _Exx) needs to be invoked
to take care of the events (possibly) signaled before the GPE was
enabled.  In the latter case, however, the first caller of
acpi_enable_gpe() for a given GPE should not be expected to care
about any events that might be signaled through it earlier.  In
that case, it is better to clear the status of the GPE before
enabling it, to prevent stale events from triggering unwanted
actions (like spurious system resume, for example).

For this reason, modify acpi_ev_add_gpe_reference() to take an
additional boolean argument indicating whether or not the GPE
status needs to be cleared when its reference counter changes from
zero to one and make acpi_enable_gpe() pass TRUE to it through
that new argument.

Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Reported-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-19 11:46:21 +02:00
Jonathan Corbet
8afecfb0ec Linux 5.2-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
 4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
 dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
 ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
 DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
 g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
 XCMhQ9s=
 =cb80
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc4' into mauro

We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
2019-06-14 14:18:53 -06:00
Nikolaus Voss
d06c47e3dd ACPI: configfs: Resolve objects on host-directed table loads
If an ACPI SSDT overlay is loaded after built-in tables
have been loaded e.g. via configfs or efivar_ssdt_load()
it is necessary to rewalk the namespace to resolve
references. Without this, relative and absolute paths
like ^PCI0.SBUS or \_SB.PCI0.SBUS are not resolved
correctly.

Make configfs loads use the same method as efivar_ssdt_load().

Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-14 11:39:42 +02:00
Andrea Oliveri
c78fea61f0 ACPI: tables: Allow BGRT to be overridden
Thinkpad T Series expose a malformed BGRT table with Version field set
to 0. This fact prevents bootsplashes (as Plymouth) to correctly show
the manufacturer logo. This patch permits to override malformed BGRT
table with a correct one defined by the user.

Signed-off-by: Andrea Oliveri <oliveriandrea@gmail.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-13 22:54:12 +02:00
Andy Shevchenko
a3487d8f30 ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
Switch the acpi_pm_finish() to use acpi_dev_get_first_match_dev() instead of
custom approach.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-13 22:43:21 +02:00
Mauro Carvalho Chehab
cb1aaebea8 docs: fix broken documentation links
Mostly due to x86 and acpi conversion, several documentation
links are still pointing to the old file. Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-08 13:42:13 -06:00
Thomas Gleixner
b886d83c5b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:17 +02:00
Thomas Gleixner
82664963ee treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
Based on 1 normalized pattern(s):

  this file is licensed under gplv2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 22 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.129548190@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:17 +02:00
Thomas Gleixner
55716d2643 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428
Based on 1 normalized pattern(s):

  this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:16 +02:00
Thomas Gleixner
a10e763b87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 135 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:10 +02:00
Thomas Gleixner
5b497af42f treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of version 2 of the gnu general public license as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 64 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:38 +02:00
Thomas Gleixner
2025cf9e19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner
97fb5e8d9b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 and
  only version 2 as published by the free software foundation this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 294 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Qian Cai
9fe51603d9 ACPI: OSL: Make a W=1 kernel-doc warning go away
It appears that kernel-doc does not understand the return type *__ref,

drivers/acpi/osl.c:306: warning: cannot understand function prototype:
'void __iomem *__ref acpi_os_map_iomem(acpi_physical_address phys,
acpi_size size)

Signed-off-by: Qian Cai <cai@lca.pw>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-04 17:21:11 +02:00
Heikki Krogerus
ee48cef6c3 ACPI / property: Don't limit named child node matching to data nodes
There is no reason why we should limit the use of
fwnode_get_named_child_node() to data nodes only.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-03 10:55:38 +02:00
Linus Torvalds
702c31e856 Power management fixes for 5.2-rc3
- Modify the PCI bus type's PM code to avoid putting devices left
    by their drivers in D0 on purpose during suspend to idle into
    low-power states as doing that may confuse the system resume
    callbacks of the drivers in question (Rafael Wysocki).
 
  - Avoid checking ACPI wakeup configuration during system-wide
    suspend for suspended devices that do not use ACPI-based wakeup
    to allow them to stay in suspend more often (Rafael Wysocki).
 
  - The last phase of hibernation is analogous to system-wide suspend
    also because on platforms with ACPI it passes control to the
    platform firmware to complete the transision, so make it indicate
    that by calling pm_set_suspend_via_firmware() to allow the drivers
    that care about this to do the right thing (Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzw7b0SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxeCAQAJQKrXMdguELnhSS5pEC4+WsFTk4nwAN
 DczNIbhogFSmzw4jOWsjQARqbZkDXhmMSoWSKXLlujONDtYOm56Cun3R90DLL3wp
 jIu41LA2M3jM8/hmog9elhr/eFQwbnO3qm7nanysBqWdsQlqmz1d0/BhlGf+rufc
 nFVXbxmBUk8M9o6guhwPl5YULIkxOFR9b8mjfOvpsxPcMBz9+ZRSM7/KbVVbJCY4
 Bkbbu/IUAGywAO2PFjl0lBvdYT7Rbaf+/UOUhOF+3AUcEgoBcJl0+2eamngwra8U
 OVzip+vKIcYCdrzmpCw1X4pesAV7Lq8AdXhWDGMGn0QUss/j5nBmesXrXKzecPum
 7ett/9ZAQ0UncULnHWmXu4352r+RcKZix/ul3k3uR+flBENK7rR7M8PUJdIWqaaB
 +qxcLz8MgCBcRw53fWjGy8gJd+IqKx+wcmqQ9tnHpVC0HK51KR6uCaF1VI8SDT/0
 t+vbmtlKb9Fi5Th4tAytzZS49uoREmm7hs+rnFxNe+Ms4kLCc3/ZpUyQeAC6jBB0
 Ul6RfWhHbzuZoqYmxXiEVkcrnQryiWbqmS1AbHQyUnjKepn+z00Rt7Ye94A7C8n/
 fxCWOpCZtBvWOT9MudNIVh/YIuEEsPnZWn2mAkAs8gDGlOgcpsl/LbAhJLYb4IOv
 9w0RNwXVKsVk
 =Ddo8
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix three issues in the system-wide suspend and hibernation area
  related to PCI device PM handling by suspend-to-idle, device wakeup
  optimizations and arbitrary differences between suspend and
  hiberantion.

  Specifics:

   - Modify the PCI bus type's PM code to avoid putting devices left by
     their drivers in D0 on purpose during suspend to idle into
     low-power states as doing that may confuse the system resume
     callbacks of the drivers in question (Rafael Wysocki).

   - Avoid checking ACPI wakeup configuration during system-wide suspend
     for suspended devices that do not use ACPI-based wakeup to allow
     them to stay in suspend more often (Rafael Wysocki).

   - The last phase of hibernation is analogous to system-wide suspend
     also because on platforms with ACPI it passes control to the
     platform firmware to complete the transision, so make it indicate
     that by calling pm_set_suspend_via_firmware() to allow the drivers
     that care about this to do the right thing (Rafael Wysocki)"

* tag 'pm-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: PM: Avoid possible suspend-to-idle issue
  ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation
  ACPI/PCI: PM: Add missing wakeup.flags.valid checks
2019-05-31 10:38:35 -07:00
Thomas Gleixner
1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner
c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Lenny Szubowicz
32865e3e01 ACPI / LPIT: Correct LPIT end address for lpit_process()
Correct the LPIT end address which is passed into lpit_process()
and the end address limit test in lpit_process().

The LPI state descriptor subtables follow the fixed sized
acpi_lpit_header up to the end of the LPIT. The last LPI state
descriptor can end at exactly the end of the LPIT.

Note that this is a fix to a latent problem. Although incorrect,
the unpatched version works because the passed in end address
is just slightly beyond the actual end of the LPIT and the size
of the ACPI LPIT header is smaller than the size of the only
currently defined LPI state descriptor, acpi_lpit_native.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-28 19:30:27 +02:00
Ard Biesheuvel
621dc2fdce acpi/irq: Implement helper to create hierachical domains
ACPI permits arbitrary producer->consumer interrupt links to be
described in AML, which means a topology such as the following
is perfectly legal:

  Device (EXIU) {
    Name (_HID, "SCX0008")
    Name (_UID, Zero)
    Name (_CRS, ResourceTemplate () {
      ...
    })
  }

  Device (GPIO) {
    Name (_HID, "SCX0007")
    Name (_UID, Zero)
    Name (_CRS, ResourceTemplate () {
      Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE)
      Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") {
        7,
      }
    })
    ...
  }

The EXIU in this example is the external interrupt unit as can be found
on Socionext SynQuacer based platforms, which converts a block of 32 SPIs
from arbitrary polarity/trigger into level-high, with a separate set
of config/mask/unmask/clear controls.

The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models
this as a hierarchical domain stacked on top of the GIC's irqdomain.
Since the GIC is modeled as a DT node as well, obtaining a reference
to this irqdomain is easily done by going through the parent link.

On ACPI systems, however, the GIC is not modeled as an object in the
namespace, and so device objects cannot refer to it directly. So in
order to obtain the irqdomain reference when driving the EXIU in ACPI
mode, we need a helper that implicitly grabs the default domain as the
parent of the hierarchy for interrupts allocated out of the global GSI
pool.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-28 14:54:54 +01:00
Rafael J. Wysocki
bb1869012d ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation
On systems with ACPI platform firmware the last stage of hibernation
is analogous to system suspend to S3 (suspend-to-RAM), so it should
be handled analogously.  In particular, pm_suspend_via_firmware()
should return 'true' in that stage to let the callers of it know that
control will be passed to the platform firmware going forward, so
pm_set_suspend_via_firmware() needs to be called then in analogy with
acpi_suspend_begin().

However, the platform hibernation ->begin() callback is invoked
during the "freeze" transition (before creating a snapshot image of
system memory) as well as during the "hibernate" transition which is
the last stage of it and pm_set_suspend_via_firmware() should be
invoked by that callback in the latter stage only.

In order to implement that redefine the hibernation ->begin()
callback to take a pm_message_t argument to indicate which stage
of hibernation is taking place and rework acpi_hibernation_begin()
and acpi_hibernation_begin_old() to take it into account as needed.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-27 10:51:45 +02:00
Rafael J. Wysocki
9a51c6b1f9 ACPI/PCI: PM: Add missing wakeup.flags.valid checks
Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the
current ACPI wakeup configuration of the device matches what is
expected as far as system wakeup from sleep states is concerned, as
reflected by the device_may_wakeup() return value for the device.

However, they only should do that if wakeup.flags.valid is set for
the device's ACPI companion, because otherwise the wakeup.prepare_count
value for it is meaningless.

Add the missing wakeup.flags.valid checks to these functions.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-27 10:51:06 +02:00
Linus Torvalds
0a72ef8990 Second round of arm64 fixes for -rc2
- Fix incorrect LDADD instruction encoding in our disassembly macros
 
 - Disable the broken ARM64_PSEUDO_NMI support for now
 
 - Add workaround for Cortex-A76 CPU erratum #1463225
 
 - Handle Cortex-A76/Neoverse-N1 erratum #1418040 w/ existing workaround
 
 - Fix IORT build failure if IOMMU_SUPPORT=n
 
 - Fix place-relative module relocation range checking and its
   interaction with KASLR
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzoC8MACgkQt6xw3ITB
 YzQfiAf+MXFzrAd3o7v40CnZu6ELw+ldedPh34oBjD7h6we3hroxi5Fss2nbwH0o
 BmAm4Nv1/Njk5+hA7Mlp3/mRn0vcd3NDP+FyH3inLjUU7owc41thp0SKlCOfFdZk
 K8sVCOeCWt7GEEPcnFsPO0nU+7f3ZKDDNBo0L+qJPxrMOTDcbQ3cIjW/ua7vQRHv
 pIDGF+iJAhHeNoc1Wjq08F8Q+Dq7dYvhtokeyDivSn4NulmRvdL+z581gMmj7ExT
 ARB6WtHGoOo+8UdjBJIDnXRKhJLfGexQaoAojk+IogaV0ACDtz6CuqsSIh1e5SFC
 oPqRSP5ITTbXEDS5uaUW1pYlwmGTaw==
 =ynUz
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull more arm64 fixes from Will Deacon:

 - Fix incorrect LDADD instruction encoding in our disassembly macros

 - Disable the broken ARM64_PSEUDO_NMI support for now

 - Add workaround for Cortex-A76 CPU erratum #1463225

 - Handle Cortex-A76/Neoverse-N1 erratum #1418040 w/ existing workaround

 - Fix IORT build failure if IOMMU_SUPPORT=n

 - Fix place-relative module relocation range checking and its
   interaction with KASLR

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: insn: Add BUILD_BUG_ON() for invalid masks
  arm64: insn: Fix ldadd instruction encoding
  arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now
  arm64: Handle erratum 1418040 as a superset of erratum 1188873
  arm64/module: deal with ambiguity in PRELxx relocation ranges
  ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
  arm64/kernel: kaslr: reduce module randomization range to 2 GB
  arm64: errata: Add workaround for Cortex-A76 erratum #1463225
  arm64: Remove useless message during oops
2019-05-24 11:03:26 -07:00
Lorenzo Pieralisi
8212688600 ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
If IOMMU_SUPPORT is not enabled (and therefore IOMMU_API is not
selected), struct iommu_fwspec is an empty struct and
IOMMU_FWSPEC_PCI_RC_ATS is not defined, resulting in the following
compilation errors:

drivers/acpi/arm64/iort.c: In function iort_iommu_configure:
drivers/acpi/arm64/iort.c:1079:21: error: struct iommu_fwspec has no member named flag:
    dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
                     ^~
drivers/acpi/arm64/iort.c:1079:32: error: IOMMU_FWSPEC_PCI_RC_ATS
undeclared (first use in this function)
    dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
                                ^~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/arm64/iort.c:1079:32: note: each undeclared identifier is reported only once for each function it appears in

Move iort_iommu_configure() (and the helpers functions it relies on)
into CONFIG_IOMMU_API preprocessor guarded code so that when
CONFIG_IOMMU_SUPPORT is not enabled we prevent compiling code that is
basically equivalent to no-OP, fixing the build errors.

Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190515034253.79348-1-wangkefeng.wang@huawei.com/
Fixes: 5702ee2418 ("ACPI/IORT: Check ATS capability in root complex nodes")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-23 11:38:11 +01:00
Thomas Gleixner
4359375c31 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose good title or non infringement see the gnu general public
  license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 7 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.727898173@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:45 +02:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Thomas Gleixner
09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Thomas Gleixner
457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Linus Torvalds
815d469d8c One more patch to remove io.h from clk-provider.h. We used to need this
include when we had clk_readl() and clk_writel(), but those are gone now
 so this patch pushes the dependency out to the users of clk-provider.h.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlzdx/ERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUeJw/+NfQU+GwmfM1mXUnClTuJthKZRlXQTt4o
 KzD4VtdqWOPSPWF2QNUM3oG5+FxbmzxZBMMyAfWKO4MS/hYvD3wZOdbP56KvoUe6
 I75FHSGYlXFMvohm6vjPvfx30IcBn0QZcP9bhP5B5h0UbIG9annbVWWNR2qBg+/O
 4p3o33CPSIO5W3IblSWrFzuEOBXNlkJKTIZW2BcV33aUCbAD3wrvqoP5l7xBbDJN
 U+QC+4LoZtA1RSM03qOzHleXrXNhBjWNtxRqXCIu0hkmyVdPAHDg0tb745HdLUc+
 PTRCCguU21ANJMf2hD0dYiRi5fSPSLzIqQ2uZW8O6/ChSIMsOrZ43tW1TsQ7E7ZD
 gGEu2aj5euPyTVh0HmWKXyqEEUF/fqywJtwNQSyNTzDvQd807Pabb1YoIzZz9w2S
 V+/PoDVYF90IN1DsuOnbTCQ/BK0bqUb+7BtkrCzJ1ip3FpdB3017zT1b5wIzLjfI
 1NO3ub5iHGAiS1qzChGa3Va56CDjspx66atMomDaeOQsBC983GdWOerBunKxL3UM
 US7rhr9DgPz8p9DEFPeXQXABgZUV4ToBb8nD8b2U1eFiOZthg7CO5mKSuwPGXcBQ
 RsWwmxc87DZJJJno2abacK/h0ii/r8f+3+C9x98vtYewJEC5RHbJygYHcr3YNjo1
 LOdCMassRT4=
 =JjQo
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk framework updates from Stephen Boyd:
 "One more patch to remove io.h from clk-provider.h.

  We used to need this include when we had clk_readl() and clk_writel(),
  but those are gone now so this patch pushes the dependency out to the
  users of clk-provider.h"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Remove io.h from clk-provider.h
2019-05-16 19:05:35 -07:00
Stephen Boyd
62e59c4e69 clk: Remove io.h from clk-provider.h
Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

  git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
  	xargs git grep -l \
	-e '\<__iowrite32_copy\>' --or \
	-e '\<__ioread32_copy\>' --or \
	-e '\<__iowrite64_copy\>' --or \
	-e '\<ioremap_page_range\>' --or \
	-e '\<ioremap_huge_init\>' --or \
	-e '\<arch_ioremap_pud_supported\>' --or \
	-e '\<arch_ioremap_pmd_supported\>' --or \
	-e '\<devm_ioport_map\>' --or \
	-e '\<devm_ioport_unmap\>' --or \
	-e '\<IOMEM_ERR_PTR\>' --or \
	-e '\<devm_ioremap\>' --or \
	-e '\<devm_ioremap_nocache\>' --or \
	-e '\<devm_ioremap_wc\>' --or \
	-e '\<devm_iounmap\>' --or \
	-e '\<devm_ioremap_release\>' --or \
	-e '\<devm_memremap\>' --or \
	-e '\<devm_memunmap\>' --or \
	-e '\<__devm_memremap_pages\>' --or \
	-e '\<pci_remap_cfgspace\>' --or \
	-e '\<arch_has_dev_port\>' --or \
	-e '\<arch_phys_wc_add\>' --or \
	-e '\<arch_phys_wc_del\>' --or \
	-e '\<memremap\>' --or \
	-e '\<memunmap\>' --or \
	-e '\<arch_io_reserve_memtype_wc\>' --or \
	-e '\<arch_io_free_memtype_wc\>' --or \
	-e '\<__io_aw\>' --or \
	-e '\<__io_pbw\>' --or \
	-e '\<__io_paw\>' --or \
	-e '\<__io_pbr\>' --or \
	-e '\<__io_par\>' --or \
	-e '\<__raw_readb\>' --or \
	-e '\<__raw_readw\>' --or \
	-e '\<__raw_readl\>' --or \
	-e '\<__raw_readq\>' --or \
	-e '\<__raw_writeb\>' --or \
	-e '\<__raw_writew\>' --or \
	-e '\<__raw_writel\>' --or \
	-e '\<__raw_writeq\>' --or \
	-e '\<readb\>' --or \
	-e '\<readw\>' --or \
	-e '\<readl\>' --or \
	-e '\<readq\>' --or \
	-e '\<writeb\>' --or \
	-e '\<writew\>' --or \
	-e '\<writel\>' --or \
	-e '\<writeq\>' --or \
	-e '\<readb_relaxed\>' --or \
	-e '\<readw_relaxed\>' --or \
	-e '\<readl_relaxed\>' --or \
	-e '\<readq_relaxed\>' --or \
	-e '\<writeb_relaxed\>' --or \
	-e '\<writew_relaxed\>' --or \
	-e '\<writel_relaxed\>' --or \
	-e '\<writeq_relaxed\>' --or \
	-e '\<readsb\>' --or \
	-e '\<readsw\>' --or \
	-e '\<readsl\>' --or \
	-e '\<readsq\>' --or \
	-e '\<writesb\>' --or \
	-e '\<writesw\>' --or \
	-e '\<writesl\>' --or \
	-e '\<writesq\>' --or \
	-e '\<inb\>' --or \
	-e '\<inw\>' --or \
	-e '\<inl\>' --or \
	-e '\<outb\>' --or \
	-e '\<outw\>' --or \
	-e '\<outl\>' --or \
	-e '\<inb_p\>' --or \
	-e '\<inw_p\>' --or \
	-e '\<inl_p\>' --or \
	-e '\<outb_p\>' --or \
	-e '\<outw_p\>' --or \
	-e '\<outl_p\>' --or \
	-e '\<insb\>' --or \
	-e '\<insw\>' --or \
	-e '\<insl\>' --or \
	-e '\<outsb\>' --or \
	-e '\<outsw\>' --or \
	-e '\<outsl\>' --or \
	-e '\<insb_p\>' --or \
	-e '\<insw_p\>' --or \
	-e '\<insl_p\>' --or \
	-e '\<outsb_p\>' --or \
	-e '\<outsw_p\>' --or \
	-e '\<outsl_p\>' --or \
	-e '\<ioread8\>' --or \
	-e '\<ioread16\>' --or \
	-e '\<ioread32\>' --or \
	-e '\<ioread64\>' --or \
	-e '\<iowrite8\>' --or \
	-e '\<iowrite16\>' --or \
	-e '\<iowrite32\>' --or \
	-e '\<iowrite64\>' --or \
	-e '\<ioread16be\>' --or \
	-e '\<ioread32be\>' --or \
	-e '\<ioread64be\>' --or \
	-e '\<iowrite16be\>' --or \
	-e '\<iowrite32be\>' --or \
	-e '\<iowrite64be\>' --or \
	-e '\<ioread8_rep\>' --or \
	-e '\<ioread16_rep\>' --or \
	-e '\<ioread32_rep\>' --or \
	-e '\<ioread64_rep\>' --or \
	-e '\<iowrite8_rep\>' --or \
	-e '\<iowrite16_rep\>' --or \
	-e '\<iowrite32_rep\>' --or \
	-e '\<iowrite64_rep\>' --or \
	-e '\<__io_virt\>' --or \
	-e '\<pci_iounmap\>' --or \
	-e '\<virt_to_phys\>' --or \
	-e '\<phys_to_virt\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<__ioremap\>' --or \
	-e '\<iounmap\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<ioremap_nocache\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wt\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<xlate_dev_kmem_ptr\>' --or \
	-e '\<xlate_dev_mem_ptr\>' --or \
	-e '\<unxlate_dev_mem_ptr\>' --or \
	-e '\<virt_to_bus\>' --or \
	-e '\<bus_to_virt\>' --or \
	-e '\<memset_io\>' --or \
	-e '\<memcpy_fromio\>' --or \
	-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-15 13:21:37 -07:00
Linus Torvalds
fcdec14365 More ACPI updates for 5.2-rc1
- Update the ACPICA code in the kernel to upstream revision 20190509
    including one regression fix:
    * Prevent excessive ACPI debug messages from being printed
      by moving the ACPI_DEBUG_DEFAULT definition to the right
      place (Erik Schmauss).
 
  - Set the enable_for_wake bits for wakeup GPEs during suspend to
    idle to allow acpi_enable_all_wakeup_gpes() to enable them as
    aproppriate and make wakeup devices sighaling events through ACPI
    GPEs work with suspend-to-idle again (Rajat Jain).
 
  - Use 64 bits to store the return values of _ADR which are assumed
    to be 64-bit by some bus specs and may contain nonzero bits in the
    upper 32 bits part for some devices (Pierre-Louis Bossart).
 
  - Fix two minor issues with the ACPI documentation (Sakari Ailus).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzb4csSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx3NoQAKA9d7c8hfTX0IhFCvp4ya8wouJdF3Yf
 1HG46/GJSfmW0t5MWq3u1GnOJMJyi1rOAuSi+7AnHoPioiBW/nAylWRNp3ZyL/Tg
 fBxnpWEcM/hv9/ZZ2X456pH49VsJrfl1MtcRHeQrMHRLr+pFjmRVSKtXXIuf1whA
 N8mjgGRf7S7CVlg6F+ojJDzxgM0FOu+0elildxDmdSLxuGrhvTVxlGtme8z5GVRa
 EDWsAk6euplO3CMANhoNG0KGk20u+pEVRtg/+y7HOD21kiaMwqR7Ip6i+ZRz74uu
 KaW2TTFluBVyGjpgCC27uR64MfB6PmmMvbw+rQkylP3viLfZL+NHrBZQPZJnWtHq
 DlET3sQoNmXhjhajS3HC/d2pwtGhijX/gIW5E3AJhcLfhYNJdzpqGYWzpBg6RTZN
 k0EFZ+81yhup7to9T0ORT3UYSCwotutrXmMttk7wmlNjNqR+pvsFIo6PzYSPWm0u
 a8hHtc2U7X/3f/XosdMhZu4r3v7T/eDaZYk7GT1/EbXe6AkdL3qR8PX1FKoFZfUL
 YrL6b9bHKq8hhh4veqkEfFGNtEJcgkcU3b2BrTedSZ+v+GkORZAyQGDwmaZYmqz9
 SsusRGzHXBZ2szL/SHvLu1KPLuBKJmj3WiYbcX6I0QsCfYLgOjmv1vVQO1GaNsqT
 lPuX5awFrnbU
 =/71L
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These fix two regressions introduced during the 5.0 cycle, in ACPICA
  and in device PM, cause the values returned by _ADR to be stored in 64
  bits and fix two ACPI documentation issues.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190509
     including one regression fix:
       * Prevent excessive ACPI debug messages from being printed by
         moving the ACPI_DEBUG_DEFAULT definition to the right place
         (Erik Schmauss).

   - Set the enable_for_wake bits for wakeup GPEs during suspend to idle
     to allow acpi_enable_all_wakeup_gpes() to enable them as
     aproppriate and make wakeup devices sighaling events through ACPI
     GPEs work with suspend-to-idle again (Rajat Jain).

   - Use 64 bits to store the return values of _ADR which are assumed to
     be 64-bit by some bus specs and may contain nonzero bits in the
     upper 32 bits part for some devices (Pierre-Louis Bossart).

   - Fix two minor issues with the ACPI documentation (Sakari Ailus)"

* tag 'acpi-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Set enable_for_wake for wakeup GPEs during suspend-to-idle
  Documentation: ACPI: Direct references are allowed to devices only
  Documentation: ACPI: Use tabs for graph ASL indentation
  ACPICA: Update version to 20190509
  ACPICA: Linux: move ACPI_DEBUG_DEFAULT flag out of ifndef
  ACPI: bus: change _ADR representation to 64 bits
2019-05-15 08:58:49 -07:00
Rafael J. Wysocki
e3e28670bb Merge branches 'acpi-bus', 'acpi-doc' and 'acpi-pm'
* acpi-bus:
  ACPI: bus: change _ADR representation to 64 bits

* acpi-doc:
  Documentation: ACPI: Direct references are allowed to devices only
  Documentation: ACPI: Use tabs for graph ASL indentation

* acpi-pm:
  ACPI: PM: Set enable_for_wake for wakeup GPEs during suspend-to-idle
2019-05-15 11:03:16 +02:00
Linus Torvalds
414147d99b pci-v5.2-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlzZ/4MUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwmYw/+Mzkkz/zOpzYdsYyy6Xv3qRdn92Kp
 bePOPACdwpUK+HV4qE6EEYBcVZdkO7NMkshA7wIb4VlsE0sVHSPvlybUmTUGWeFd
 CG87YytVOo4K7cAeKdGVwGaoQSeaZX3wmXVGGQtm/T4b63GdBjlNJ/MBuPWDDMlM
 XEis29MTH6xAu3MbT7pp5q+snSzOmt0RWuVpX/U1YcZdhu8fbwfOxj9Jx6slh4+2
 MvseYNNrTRJrMF0o5o83Khx3tAcW8OTTnDJ9+BCrAlE1PId1s/KjzY6nqReBtom9
 CIqtwAlx/wGkRBRgfsmEtFBhkDA05PPilhSy6k2LP8B4A3qBqir1Pd+5bhHG4FIu
 nPPCZjZs2+0DNrZwQv59qIlWsqDFm214WRln9Z7d/VNtrLs2UknVghjQcHv7rP+K
 /NKfPlAuHTI/AFi9pIPFWTMx5J4iXX1hX4LiptE9M0k9/vSiaCVnTS3QbFvp3py3
 VTT9sprzfV4JX4aqS/rbQc/9g4k9OXPW9viOuWf5rYZJTBbsu6PehjUIRECyFaO+
 0gDqE8WsQOtNNX7e5q2HJ/HpPQ+Q1IIlReC+1H56T/EQZmSIBwhTLttQMREL/8af
 Lka3/1SVUi4WG6SBrBI75ClsR91UzE6AK+h9fAyDuR6XJkbysWjkyG6Lmy617g6w
 lb+fQwOzUt4eGDo=
 =4Vc+
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Add _HPX Type 3 settings support, which gives firmware more
     influence over device configuration (Alexandru Gagniuc)

   - Support fixed bus numbers from bridge Enhanced Allocation
     capabilities (Subbaraya Sundeep)

   - Add "external-facing" DT property to identify cases where we
     require IOMMU protection against untrusted devices (Jean-Philippe
     Brucker)

   - Enable PCIe services for host controller drivers that use managed
     host bridge alloc (Jean-Philippe Brucker)

   - Log PCIe port service messages with pci_dev, not the pcie_device
     (Frederick Lawler)

   - Convert pciehp from pciehp_debug module parameter to generic
     dynamic debug (Frederick Lawler)

  Peer-to-peer DMA:

   - Add whitelist of Root Complexes that support peer-to-peer DMA
     between Root Ports (Christian König)

  Native controller drivers:

   - Add PCI host bridge DMA ranges for bridges that can't DMA
     everywhere, e.g., iProc (Srinath Mannam)

   - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
     Chocron)

   - Fix Tegra MSI target allocation so DMA doesn't generate unwanted
     MSIs (Vidya Sagar)

   - Fix of_node reference leaks (Wen Yang)

   - Fix Hyper-V module unload & device removal issues (Dexuan Cui)

   - Cleanup R-Car driver (Marek Vasut)

   - Cleanup Keystone driver (Kishon Vijay Abraham I)

   - Cleanup i.MX6 driver (Andrey Smirnov)

  Significant bug fixes:

   - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
     Paul)

   - Fix Switchtec firmware update performance issue (Wesley Sheng)

   - Work around Pericom switch link retraining erratum (Stefan Mätje)"

* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
  MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
  PCI: pciehp: Remove pointless MY_NAME definition
  PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
  PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
  PCI: pciehp: Log messages with pci_dev, not pcie_device
  PCI: pciehp: Replace pciehp_debug module param with dyndbg
  PCI: pciehp: Remove pciehp_debug uses
  PCI/AER: Log messages with pci_dev, not pcie_device
  PCI/DPC: Log messages with pci_dev, not pcie_device
  PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
  PCI: Replace printk(KERN_INFO) with pr_info(), etc
  PCI: Use dev_printk() when possible
  PCI: Cleanup setup-bus.c comments and whitespace
  PCI: imx6: Allow asynchronous probing
  PCI: dwc: Save root bus for driver remove hooks
  PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
  PCI: dwc: Free MSI in dw_pcie_host_init() error path
  PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
  ...
2019-05-14 10:30:10 -07:00
Rajat Jain
2f844b61db ACPI: PM: Set enable_for_wake for wakeup GPEs during suspend-to-idle
I noticed that recently multiple systems (chromebooks) couldn't wake
from S0ix using LID or Keyboard after updating to a newer kernel. I
bisected and it turned up commit f941d3e41d ("ACPI: EC / PM: Disable
non-wakeup GPEs for suspend-to-idle"). I checked that the issue got
fixed if that commit was reverted.

I debugged and found that although PNP0C0D:00 (representing the LID)
is wake capable and should wakeup the system per the code in
acpi_wakeup_gpe_init() and in drivers/acpi/button.c:

localhost /sys # cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
LID0      S4    *enabled   platform:PNP0C0D:00
CREC      S5    *disabled  platform:GOOG0004:00
                *disabled  platform:cros-ec-dev.1.auto
                *disabled  platform:cros-ec-accel.0
                *disabled  platform:cros-ec-accel.1
                *disabled  platform:cros-ec-gyro.0
                *disabled  platform:cros-ec-ring.0
                *disabled  platform:cros-usbpd-charger.2.auto
                *disabled  platform:cros-usbpd-logger.3.auto
D015      S3    *enabled   i2c:i2c-ELAN0000:00
PENH      S3    *enabled   platform:PRP0001:00
XHCI      S3    *enabled   pci:0000:00:14.0
GLAN      S4    *disabled
WIFI      S3    *disabled  pci:0000:00:14.3
localhost /sys #

On debugging, I found that its corresponding GPE is not being enabled.
The particular GPE's "gpe_register_info->enable_for_wake" does not
have any bits set when acpi_enable_all_wakeup_gpes() comes around to
use it. I looked at code and could not find any other code path that
should set the bits in "enable_for_wake" bitmask for the wake enabled
devices for s2idle.  [I do see that it happens for S3 in
acpi_sleep_prepare()].

Thus I used the same call to enable the GPEs for wake enabled devices,
and verified that this fixes the regression I was seeing on multiple
of my devices.

[ rjw: The problem is that commit f941d3e41d ("ACPI: EC / PM:
  Disable non-wakeup GPEs for suspend-to-idle") forgot to add
  the acpi_enable_wakeup_devices() call for s2idle along with
  acpi_enable_all_wakeup_gpes(). ]

Fixes: f941d3e41d ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203579
Signed-off-by: Rajat Jain <rajatja@google.com>
[ rjw: Subject & changelog ]
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-14 11:02:09 +02:00
Bjorn Helgaas
83d8235282 Merge branch 'pci/host/al'
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
    Chocron)

* pci/host/al:
  PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
2019-05-13 18:34:36 -05:00
Linus Torvalds
a13f065550 IOMMU Updates for Linux v5.2
Including:
 
 	- ATS support for ARM-SMMU-v3.
 
 	- AUX domain support in the IOMMU-API and the Intel VT-d driver.
 	  This adds support for multiple DMA address spaces per
 	  (PCI-)device. The use-case is to multiplex devices between
 	  host and KVM guests in a more flexible way than supported by
 	  SR-IOV.
 
 	- The Rest are smaller cleanups and fixes, two of which needed
 	  to be reverted after testing in linux-next.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlzZWPkACgkQK/BELZcB
 GuPdRRAAj/RcgVn7fqmNDM02xe6C5PuwBGYkXnC+atDrTQWbFsM0JE3YTWEHJ+66
 7RMoYaksRaSBsn3QuX3b6+g6E+exhGoQ0BfkmuF8StUXAsaxvzGxvuk+cP0o4/mK
 pZkj3BddS4ycRqQPsVEbgJGRzL39dxWHe7p3/FfwgV+HzVonURFozU0HixLAoBhr
 uS0LpBiG8uGCMvO6yhTmPmfrbsSAcMivb7LlmsaykXPhjBk7kSqNgHNNx5O+HC8m
 XJdFatkxolkrN6A2FoHdP05sAXCv+uHbAGGGitYziRaXG7GBzm7Vc2LspJIml+y2
 898+MiTH1M3P0WPyDa3cfcnRc2BBuJg56emad4CcfduM9sVXI0Ol6slNAYljnSYD
 5A0CUxbrLxGUZaf6DAUJ9w5L+LhgEkXzKWEE9Nif46K4I1CFSt/d8nwB6Q5Oc/ie
 GZwTICRkMwTeqOM/CTyvwJCCwZm47AVv3qwaI0z5oDplH/bbRmNEi5WFJsgcgOnd
 GS5kmzjFBsljjDVWswgugdm7sdMSl7y88uQK9zUiG8fXgRiVUW/rENfZ1SMmVl1p
 zBQDndZmtrHm5ybe/NAZ8vaJhk4i1F3rWT0hwRZZKGDIrd/C3egnNyYkc4XeTPGe
 3il+dJleIIwOX5Fpa44XTV1rDuVOXpF5LS5NRLjhhd+XqbaXZFI=
 =HLtu
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - ATS support for ARM-SMMU-v3.

 - AUX domain support in the IOMMU-API and the Intel VT-d driver. This
   adds support for multiple DMA address spaces per (PCI-)device. The
   use-case is to multiplex devices between host and KVM guests in a
   more flexible way than supported by SR-IOV.

 - the rest are smaller cleanups and fixes, two of which needed to be
   reverted after testing in linux-next.

* tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits)
  Revert "iommu/amd: Flush not present cache in iommu_map_page"
  Revert "iommu/amd: Remove the leftover of bypass support"
  iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path
  iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
  iommu/vt-d: Set intel_iommu_gfx_mapped correctly
  iommu/amd: Flush not present cache in iommu_map_page
  iommu/vt-d: Cleanup: no spaces at the start of a line
  iommu/vt-d: Don't request page request irq under dmar_global_lock
  iommu/vt-d: Use struct_size() helper
  iommu/mediatek: Fix leaked of_node references
  iommu/amd: Remove amd_iommu_pd_list
  iommu/arm-smmu: Log CBFRSYNRA register on context fault
  iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
  iommu/arm-smmu-v3: Disable tagged pointers
  iommu/arm-smmu-v3: Add support for PCI ATS
  iommu/arm-smmu-v3: Link domains and devices
  iommu/arm-smmu-v3: Add a master->domain pointer
  iommu/arm-smmu-v3: Store SteamIDs in master
  iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master
  ACPI/IORT: Check ATS capability in root complex nodes
  ...
2019-05-13 09:23:18 -04:00
Pierre-Louis Bossart
ca6f998cf9 ACPI: bus: change _ADR representation to 64 bits
Standards such as the MIPI DisCo for SoundWire 1.0 specification
assume the _ADR field is 64 bits.

_ADR is defined as an "Integer" represented as 64 bits since ACPI 2.0
released in 2002. The low levels already use _ADR as 64 bits, e.g. in
struct acpi_device_info.

This patch bumps the representation used for sysfs to 64 bits. To
avoid any compatibility/ABI issues, the printf format is only extended
to 16 characters when the actual _ADR value exceeds the 32 bit
maximum.

Example with a SoundWire device, the results show the complete
vendorID and linkID which were omitted before:

Before:
$ more /sys/bus/acpi/devices/device\:38/adr
0x5d070000
After:
$ more /sys/bus/acpi/devices/device\:38/adr
0x000010025d070000

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[ rjw: Replace 0xFFFFFFFF with U32_MAX, clean up subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-10 12:30:45 +02:00
Linus Torvalds
cf482a49af Driver core/kobject patches for 5.2-rc1
Here is the "big" set of driver core patches for 5.2-rc1
 
 There are a number of ACPI patches in here as well, as Rafael said they
 should go through this tree due to the driver core changes they
 required.  They have all been acked by the ACPI developers.
 
 There are also a number of small subsystem-specific changes in here, due
 to some changes to the kobject core code.  Those too have all been acked
 by the various subsystem maintainers.
 
 As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
 8XCYcif2RxjtdJWXbjdm
 =/rLh
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...
2019-05-07 13:01:40 -07:00
Linus Torvalds
0968621917 Printk changes for 5.2
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAlzP8nQACgkQUqAMR0iA
 lPK79A/+NkRouqA9ihAZhUbgW0DHzOAFvUJSBgX11HQAZbGjngakuoyYFvwUx0T0
 m80SUTCysxQrWl+xLdccPZ9ZrhP2KFQrEBEdeYHZ6ymcYcl83+3bOIBS7VwdZAbO
 EzB8u/58uU/sI6ABL4lF7ZF/+R+U4CXveEUoVUF04bxdPOxZkRX4PT8u3DzCc+RK
 r4yhwQUXGcKrHa2GrRL3GXKsDxcnRdFef/nzq4RFSZsi0bpskzEj34WrvctV6j+k
 FH/R3kEcZrtKIMPOCoDMMWq07yNqK/QKj0MJlGoAlwfK4INgcrSXLOx+pAmr6BNq
 uMKpkxCFhnkZVKgA/GbKEGzFf+ZGz9+2trSFka9LD2Ig6DIstwXqpAgiUK8JFQYj
 lq1mTaJZD3DfF2vnGHGeAfBFG3XETv+mIT/ow6BcZi3NyNSVIaqa5GAR+lMc6xkR
 waNkcMDkzLFuP1r0p7ZizXOksk9dFkMP3M6KqJomRtApwbSNmtt+O2jvyLPvB3+w
 wRyN9WT7IJZYo4v0rrD5Bl6BjV15ZeCPRSFZRYofX+vhcqJQsFX1M9DeoNqokh55
 Cri8f6MxGzBVjE1G70y2/cAFFvKEKJud0NUIMEuIbcy+xNrEAWPF8JhiwpKKnU10
 c0u674iqHJ2HeVsYWZF0zqzqQ6E1Idhg/PrXfuVuhAaL5jIOnYY=
 =WZfC
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

 - Allow state reset of printk_once() calls.

 - Prevent crashes when dereferencing invalid pointers in vsprintf().
   Only the first byte is checked for simplicity.

 - Make vsprintf warnings consistent and inlined.

 - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
   modifiers.

 - Some clean up of vsprintf and test_printf code.

* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Make function pointer_string static
  vsprintf: Limit the length of inlined error messages
  vsprintf: Avoid confusion between invalid address and value
  vsprintf: Prevent crash when dereferencing invalid pointers
  vsprintf: Consolidate handling of unknown pointer specifiers
  vsprintf: Factor out %pO handler as kobject_string()
  vsprintf: Factor out %pV handler as va_format()
  vsprintf: Factor out %p[iI] handler as ip_addr_string()
  vsprintf: Do not check address of well-known strings
  vsprintf: Consistent %pK handling for kptr_restrict == 0
  vsprintf: Shuffle restricted_pointer()
  printk: Tie printk_once / printk_deferred_once into .data.once for reset
  treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  lib/test_printf: Switch to bitmap_zalloc()
2019-05-07 09:18:12 -07:00
Linus Torvalds
4dd2ab9a0f Device properties framework updates for 5.2-rc1
- Fix the handling of data nodes in the ACPI properties support
    code for devices with child devices and hierarchical _DSD
    properties (Pierre-Louis Bossart).
 
  - Add fwnode_graph_get_endpoint_by_id() helper for endpoint lookup
    in device property graphs (Sakari Ailus).
 
  - Restore the _DSD data subnodes GUID comment inadvertently removed
    by one of previous changes (Shunyong Yang).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzQE80SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxWhYP/1WzJY4g5SewgzIW3aRfWBCVrDcysMQ6
 ywVf/aEWxoOTDihJfCcfnzOq0qabQfb9aTH9P5CdP42YQejqZpEb98kOP5Q4Q3Gv
 8wnOMVuOUKrUQK47cgs7VF0tiY0eWpH9YddxN9S3YrmeWGEL8A50mAnYZ0qgl4MR
 EgkAtc3c7QKWMensDJp4udOeFLEor/8MExMOMDzpGIB30j6bXgSkGx2DUvkclCKn
 4YNc664Z0msRNDb6H5Zaf8Bpv6M6zyKq+kuzkJ2FlGRo0FEURpMmSPVw+resrpWq
 9fl3mIGc1rVdlALr28Q9s3QJa/ajinHA+EfcKh1JlFOf2Nnp1l+pWPrUnFoZKm7o
 CtoC+akKfm3EeR5ObjX51yntCYUk14fQ5xMXb8ipsNn/Iou+bqcHxtgQJUnajSnK
 ugHr+xIVounWUWUvhwn8pf+hdQHkUOqfUYz+AOSFdA7UQX1JIepsnup6Wzy+PN+l
 /z/NShcYDWXYoeJjiskjAMtUIoY/cbSDX52MsxnECyIIL6dH/COt3tHOo8Ixr/uY
 q5Zl2Rp7zzPQMmUvZcJcweqdYz23JQGw4fssO8/kM3QXnyt7WD9mSyGeAa6VUw+D
 AAC2gU1YsbcDQopIlo1EZJ/8Lmx08ZX8Jq4jSRfystz98YgOpz2VZpE5QuGdUBze
 lm7wzOwMem5j
 =n6Oe
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "These fix the handling of data nodes in the ACPI properties support
  code, add a new helper for endpoint lookup in property graphs and
  restore a comment inadvertently removed by one of previous changes.

  Specifics:

   - Fix the handling of data nodes in the ACPI properties support code
     for devices with child devices and hierarchical _DSD properties
     (Pierre-Louis Bossart).

   - Add fwnode_graph_get_endpoint_by_id() helper for endpoint lookup in
     device property graphs (Sakari Ailus).

   - Restore the _DSD data subnodes GUID comment inadvertently removed
     by one of previous changes (Shunyong Yang)"

* tag 'devprop-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
  device property: Add fwnode_graph_get_endpoint_by_id()
  ACPI: property: restore _DSD data subnodes GUID comment
2019-05-06 19:45:37 -07:00
Linus Torvalds
8f5e823f91 Power management updates for 5.2-rc1
- Fix the handling of Performance and Energy Bias Hint (EPB) on
    Intel processors and expose it to user space via sysfs to avoid
    having to access it through the generic MSR I/F (Rafael Wysocki).
 
  - Improve the handling of global turbo changes made by the platform
    firmware in the intel_pstate driver (Rafael Wysocki).
 
  - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
    in cpufreq (Borislav Petkov).
 
  - Fix the frequency calculation loop in the armada-37xx cpufreq
    driver (Gregory CLEMENT).
 
  - Fix possible object reference leaks in multuple cpufreq drivers
    (Wen Yang).
 
  - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
 
  - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
    Kumar).
 
  - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
    (Vabhav Sharma, Yuantian Tang).
 
  - Fix kobject memory leak in the cpufreq core (Viresh Kumar).
 
  - Simplify the IOwait boosting in the schedutil cpufreq governor
    and rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
 
  - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
 
  - Improve the cpufreq documentation, add SPDX license tags to
    some PM documentation files and unify copyright notices in
    them (Rafael Wysocki).
 
  - Add support for "CPU" domains to the generic power domains (genpd)
    framework and provide low-level PSCI firmware support for that
    feature (Ulf Hansson).
 
  - Rearrange the PSCI firmware support code and add support for
    SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
 
  - Improve genpd support for devices in multiple power domains (Ulf
    Hansson).
 
  - Unify target residency for the AFTR and coupled AFTR states in the
    exynos cpuidle driver (Marek Szyprowski).
 
  - Introduce new helper routine in the operating performance points
    (OPP) framework (Andrew-sh.Cheng).
 
  - Add support for passing on-die termination (ODT) and auto power
    down parameters from the kernel to Trusted Firmware-A (TF-A) to
    the rk3399_dmc devfreq driver (Enric Balletbo i Serra).
 
  - Add tracing to devfreq (Lukasz Luba).
 
  - Make the exynos-bus devfreq driver suspend all devices on system
    shutdown (Marek Szyprowski).
 
  - Fix a few minor issues in the devfreq subsystem and clean it up
    somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
    Saravana Kannan, Yangtao Li).
 
  - Improve system wakeup diagnostics (Stephen Boyd).
 
  - Rework filesystem sync messages emitted during system suspend and
    hibernation (Harry Pan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzQEwUSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxxXwP/jrxikIXdCOV3CJVioV0NetyebwlOqYp
 UsIA7lQBfZ/DY6dHw/oKuAT9LP01vcFg6XGe83Alkta9qczR5KZ/MYHFNSZXjXjL
 kEvIMBCS/oykaBuW+Xn9am8Ke3Yq/rBSTKWVom3vzSQY0qvZ9GBwPDrzw+k63Zhz
 P3afB4ThyY0e9ftgw4HvSSNm13Kn0ItUIQOdaLatXMMcPqP5aAdnUma5Ibinbtpp
 rpTHuHKYx7MSjaCg6wl3kKTJeWbQP4wYO2ISZqH9zEwQgdvSHeFAvfPKTegUkmw9
 uUsQnPD1JvdglOKovr2muehD1Ur+zsjKDf2OKERkWsWXHPyWzA/AqaVv1mkkU++b
 KaWaJ9pE86kGlJ3EXwRbGfV0dM5rrl+dUUQW6nPI1XJnIOFlK61RzwAbqI26F0Mz
 AlKxY4jyPLcM3SpQz9iILqyzHQqB67rm29XvId/9scoGGgoqEI4S+v6LYZqI3Vx6
 aeSRu+Yof7p5w4Kg5fODX+HzrtMnMrPmLUTXhbExfsYZMi7hXURcN6s+tMpH0ckM
 4yiIpnNGCKUSV4vxHBm8XJdAuUnR4Vcz++yFslszgDVVvw5tkvF7SYeHZ6HqcQVm
 af9HdWzx3qajs/oyBwdRBedZYDnP1joC5donBI2ofLeF33NA7TEiPX8Zebw8XLkv
 fNikssA7PGdv
 =nY9p
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
  handling and expose it to user space via sysfs, fix and clean up
  several cpufreq drivers, add support for two new chips to the qoriq
  cpufreq driver, fix, simplify and clean up the cpufreq core and the
  schedutil governor, add support for "CPU" domains to the generic power
  domains (genpd) framework and provide low-level PSCI firmware support
  for that feature, fix the exynos cpuidle driver and fix a couple of
  issues in the devfreq subsystem and clean it up.

  Specifics:

   - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
     processors and expose it to user space via sysfs to avoid having to
     access it through the generic MSR I/F (Rafael Wysocki).

   - Improve the handling of global turbo changes made by the platform
     firmware in the intel_pstate driver (Rafael Wysocki).

   - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
     in cpufreq (Borislav Petkov).

   - Fix the frequency calculation loop in the armada-37xx cpufreq
     driver (Gregory CLEMENT).

   - Fix possible object reference leaks in multuple cpufreq drivers
     (Wen Yang).

   - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).

   - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
     Kumar).

   - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
     (Vabhav Sharma, Yuantian Tang).

   - Fix kobject memory leak in the cpufreq core (Viresh Kumar).

   - Simplify the IOwait boosting in the schedutil cpufreq governor and
     rework the TSC cpufreq notifier on x86 (Rafael Wysocki).

   - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).

   - Improve the cpufreq documentation, add SPDX license tags to some PM
     documentation files and unify copyright notices in them (Rafael
     Wysocki).

   - Add support for "CPU" domains to the generic power domains (genpd)
     framework and provide low-level PSCI firmware support for that
     feature (Ulf Hansson).

   - Rearrange the PSCI firmware support code and add support for
     SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).

   - Improve genpd support for devices in multiple power domains (Ulf
     Hansson).

   - Unify target residency for the AFTR and coupled AFTR states in the
     exynos cpuidle driver (Marek Szyprowski).

   - Introduce new helper routine in the operating performance points
     (OPP) framework (Andrew-sh.Cheng).

   - Add support for passing on-die termination (ODT) and auto power
     down parameters from the kernel to Trusted Firmware-A (TF-A) to the
     rk3399_dmc devfreq driver (Enric Balletbo i Serra).

   - Add tracing to devfreq (Lukasz Luba).

   - Make the exynos-bus devfreq driver suspend all devices on system
     shutdown (Marek Szyprowski).

   - Fix a few minor issues in the devfreq subsystem and clean it up
     somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
     Saravana Kannan, Yangtao Li).

   - Improve system wakeup diagnostics (Stephen Boyd).

   - Rework filesystem sync messages emitted during system suspend and
     hibernation (Harry Pan)"

* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  x86: tsc: Rework time_cpufreq_notifier()
  PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
  PM / Domains: Search for the CPU device outside the genpd lock
  PM / Domains: Drop unused in-parameter to some genpd functions
  PM / Domains: Use the base device for driver_deferred_probe_check_state()
  cpufreq: qoriq: Add ls1028a chip support
  PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
  PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
  PM / Domains: Don't kfree() the virtual device in the error path
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  PM / Domains: remove unnecessary unlikely()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  firmware/psci: add support for SYSTEM_RESET2
  PM / devfreq: add tracing for scheduling work
  trace: events: add devfreq trace event file
  ...
2019-05-06 19:40:31 -07:00
Linus Torvalds
59df1c2bde ACPI updates for 5.2-rc1
- Convert the ACPI documentation in the kernel source tree to the
    .rst format and split it into the admin guide, driver API and
    firmware guide parts (Changbin Du).
 
  - Add a PRP0001 usage example to the ACPI documentation (Thomas
    Preston).
 
  - Switch over the users of the acpi_dev_get_first_match_name()
    library function which turned out to be problematic to a new,
    better one called acpi_dev_get_first_match_dev() (Andy Shevchenko,
    YueHaibing).
 
  - Update the ACPICA code in the kernel to upstream release 20190405
    including:
    * Null pointer dereference check in acpi_ns_delete_node() (Erik
      Schmauss).
    * Multiple macro and function name changes (Bob Moore).
    * Predefined operation region name fix (Erik Schmauss).
 
  - Fix hibernation issue on systems using the Baytrail and
    Cherrytrail Intel SoCs introduced during the 4.20 development
    cycle (Hans de Goede).
 
  - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui).
 
  - Fix button handling during system resume (Zhang Rui).
 
  - Add a device PM diagnostic message (Rafael Wysocki).
 
  - Clean up the code, comments and white space in multiple places
    (Bjorn Helgaas, Gustavo Silva, Kefeng Wang).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzQEdcSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxVKEP/ijfyNbe2s21nZXdEmL2mEFlkK3jvN/P
 d9jDkM9u3iJzFHTjwbMrYa7uXQpLtlhsE3QrcRcfkumOf8XWH1kSY1pDfb3W701w
 3Zy1zJyiH4SA5xwipDgiqLsHneV3NqtyYHjWh0u52zM8S5aL58ZPlgxwY/qywt94
 CMCfs+QCR+MKHvJVjo8EjlF3pwOgZpIFpIHtzo5A87yzwnG3kWls0UVfJGHSAKsX
 q+m3RhglqeVYVabXU/d5B9PnZiN5SmZdI864D2a5Dh4D/puv+k9hhBdCaMMi2F25
 GZwFsBh3ymbcPCfaKe422488ERh1l8Ov1JsLUbFRcYw8euFXkaoOYtugETIy2XR9
 3JNWu3TiuBhA4EkQdpiWY+CIcUmXDUzmEDhJBG1e6hhzlqZknIcfXVp6qu3bxoA/
 OvlC3Lcaw9cHXQLGRk5S3u3F/NzdkSTD1A5bNSdHpbRqj1Ale8H8R9TUfqMX5Nsj
 r4V5m+2bFsArOdVEit9kUw0MdFq/ew6eO75lBK8sUJLfQ2utiMZW8FuJBeNWRahE
 bTsfOtxazDl0mcavROfzf4XFaBBQ0YUJvPIgVFhUPGOhlq96OAFgZYYemq7NOpQo
 EvS8OQD0+k7hFg1/z+JUr8rDa1NRlLypz4iXa/wIU1a/sE0Odv4xwTH1XLhoaQKv
 nVkGW4GD0WMX
 =LtlV
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These rearrange the ACPI documentation by converting it to the .rst
  format and splitting it into clear categories (admin guide, driver
  API, firmware guide), switch over multiple users of a problematic
  library function to a new better one, update the ACPICA code in the
  kernel to a new upstream release, fix a few issues, improve power
  device management diagnostics and do some cleanups.

  Specifics:

   - Convert the ACPI documentation in the kernel source tree to the
     .rst format and split it into the admin guide, driver API and
     firmware guide parts (Changbin Du).

   - Add a PRP0001 usage example to the ACPI documentation (Thomas
     Preston).

   - Switch over the users of the acpi_dev_get_first_match_name()
     library function which turned out to be problematic to a new,
     better one called acpi_dev_get_first_match_dev() (Andy Shevchenko,
     YueHaibing).

   - Update the ACPICA code in the kernel to upstream release 20190405
     including:
       * Null pointer dereference check in acpi_ns_delete_node() (Erik
         Schmauss).
       * Multiple macro and function name changes (Bob Moore).
       * Predefined operation region name fix (Erik Schmauss).

   - Fix hibernation issue on systems using the Baytrail and Cherrytrail
     Intel SoCs introduced during the 4.20 development cycle (Hans de
     Goede).

   - Add Sony VPCEH3U1E to the backlight quirk list (Zhang Rui).

   - Fix button handling during system resume (Zhang Rui).

   - Add a device PM diagnostic message (Rafael Wysocki).

   - Clean up the code, comments and white space in multiple places
     (Bjorn Helgaas, Gustavo Silva, Kefeng Wang)"

* tag 'acpi-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: ACPI: move video_extension.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move ssdt-overlays.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move lpit.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move cppc_sysfs.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move apei/einj.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move apei/output_format.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move aml-debugger.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move method-tracing.txt to firmware-guide/acpi and convert to rsST
  Documentation: ACPI: move debug.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/data-node-references.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsd/graph.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move acpi-lid.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move i2c-muxes.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move dsdt-override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move initrd_table_override.txt to admin-guide/acpi and convert to reST
  Documentation: ACPI: move method-customizing.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST
  Documentation: ACPI: move DSD-properties-rules.txt to firmware-guide/acpi and covert to reST
  Documentation: ACPI: move scan_handlers.txt to driver-api/acpi and convert to reST
  Documentation: ACPI: move linuxized-acpica.txt to driver-api/acpi and convert to reST
  ...
2019-05-06 19:35:13 -07:00
Linus Torvalds
c620f7bd0b arm64 updates for 5.2
Mostly just incremental improvements here:
 
 - Introduce AT_HWCAP2 for advertising CPU features to userspace
 
 - Expose SVE2 availability to userspace
 
 - Support for "data cache clean to point of deep persistence" (DC PODP)
 
 - Honour "mitigations=off" on the cmdline and advertise status via sysfs
 
 - CPU timer erratum workaround (Neoverse-N1 #1188873)
 
 - Introduce perf PMU driver for the SMMUv3 performance counters
 
 - Add config option to disable the kuser helpers page for AArch32 tasks
 
 - Futex modifications to ensure liveness under contention
 
 - Rework debug exception handling to seperate kernel and user handlers
 
 - Non-critical fixes and cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFGgACgkQt6xw3ITB
 YzTicAf/TX1h1+ecbx4WJAa4qeiOCPoNpG9efldQumqJhKL44MR5bkhuShna5mwE
 ptm5qUXkZCxLTjzssZKnbdbgwa3t+emW8Of3D91IfI9akiZbMoDx5FGgcNbqjazb
 RLrhOFHwgontA38yppZN+DrL+sXbvif/CVELdHahkEx6KepSGaS2lmPXRmz/W56v
 4yIRy/zxc3Dhjgfm3wKh72nBwoZdLiIc4mchd5pthNlR9E2idrYkQegG1C+gA00r
 o8uZRVOWgoh7H+QJE+xLUc8PaNCg8xqRRXOuZYg9GOz6hh7zSWhm+f1nRz9S2tIR
 gIgsCHNqoO2I3E1uJpAQXDGtt2kFhA==
 =ulpJ
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "Mostly just incremental improvements here:

   - Introduce AT_HWCAP2 for advertising CPU features to userspace

   - Expose SVE2 availability to userspace

   - Support for "data cache clean to point of deep persistence" (DC PODP)

   - Honour "mitigations=off" on the cmdline and advertise status via
     sysfs

   - CPU timer erratum workaround (Neoverse-N1 #1188873)

   - Introduce perf PMU driver for the SMMUv3 performance counters

   - Add config option to disable the kuser helpers page for AArch32 tasks

   - Futex modifications to ensure liveness under contention

   - Rework debug exception handling to seperate kernel and user
     handlers

   - Non-critical fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  Documentation: Add ARM64 to kernel-parameters.rst
  arm64/speculation: Support 'mitigations=' cmdline option
  arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
  arm64: enable generic CPU vulnerabilites support
  arm64: add sysfs vulnerability show for speculative store bypass
  arm64: Fix size of __early_cpu_boot_status
  clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
  clocksource/arm_arch_timer: Remove use of workaround static key
  clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
  clocksource/arm_arch_timer: Direcly assign set_next_event workaround
  arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
  ARM: vdso: Remove dependency with the arch_timer driver internals
  arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
  arm64: Add part number for Neoverse N1
  arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
  arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
  arm64: mm: Remove pte_unmap_nested()
  arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
  arm64: compat: Reduce address limit for 64K pages
  ...
2019-05-06 17:54:22 -07:00
Rafael J. Wysocki
7d4a27c1c8 Merge branch 'pm-cpufreq'
* pm-cpufreq: (24 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  cpufreq: qoriq: Add ls1028a chip support
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  cpufreq: boost: Remove CONFIG_CPU_FREQ_BOOST_SW Kconfig option
  cpufreq: stats: Use lock by stat to replace global spin lock
  cpufreq: Remove cpufreq_driver check in cpufreq_boost_supported()
  cpufreq: maple: Remove redundant code from maple_cpufreq_init()
  cpufreq: ppc_cbe: fix possible object reference leak
  cpufreq: pmac32: fix possible object reference leak
  cpufreq/pasemi: fix possible object reference leak
  cpufreq: maple: fix possible object reference leak
  cpufreq: kirkwood: fix possible object reference leak
  cpufreq: imx6q: fix possible object reference leak
  cpufreq: ap806: fix possible object reference leak
  drivers/cpufreq: Convert some slow-path static_cpu_has() callers to boot_cpu_has()
  ...
2019-05-06 10:54:27 +02:00
Rafael J. Wysocki
7e8e05fd08 Merge branches 'acpi-utils', 'acpi-video', 'acpi-soc' and 'acpi-button'
* acpi-utils:
  gpio: merrifield: Fix build err without CONFIG_ACPI
  ACPI / utils: Remove deprecated function since no user left
  ASoC: Intel: cht_bsw_rt5672: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: cht_bsw_rt5645: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5651: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5640: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_es8316: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_da7213: Convert to use acpi_dev_get_first_match_dev()
  gpio: merrifield: Convert to use acpi_dev_get_first_match_dev()
  extcon: axp288: Convert to use acpi_dev_get_first_match_dev()
  ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper

* acpi-video:
  ACPI: video: Use vendor backlight on Sony VPCEH3U1E

* acpi-soc:
  ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate

* acpi-button:
  ACPI: button: reinitialize button state upon resume
2019-05-06 10:50:08 +02:00
Rafael J. Wysocki
91751459ec Merge branches 'acpi-scan', 'acpi-tables', 'acpi-misc' and 'acpi-pm'
* acpi-scan:
  ACPI / scan: Add labels for PNP button devices
  ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package()

* acpi-tables:
  ACPI / tables: Clean up whitespace

* acpi-misc:
  ACPI / DPTF: Use dev_get_drvdata()
  ACPI: event: replace strcpy() by strscpy()
  ACPI: Fix comment typos

* acpi-pm:
  ACPI: PM: Print debug messages when enabling GPEs for wakeup
2019-05-06 10:49:39 +02:00
Rafael J. Wysocki
317e2cac45 Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20190405
  ACPICA: Namespace: add check to avoid null pointer dereference
  ACPICA: Update version to 20190329
  ACPICA: utilities: fix spelling of PCC to platform_comm_channel
  ACPICA: Rename nameseg length macro/define for clarity
  ACPICA: Rename nameseg compare macro for clarity
  ACPICA: Rename nameseg copy macro for clarity
2019-05-06 10:49:01 +02:00
Will Deacon
b33f908811 Merge branch 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into for-next/core 2019-05-03 10:18:08 +01:00
Pierre-Louis Bossart
23583f7795 ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.

The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.

This same problem of handling device and data nodes was already fixed
in a similar way by 'commit bf4703fdd1 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b1 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-01 10:06:08 +02:00
Rafael J. Wysocki
2c2a2fb1e2 Revert "ACPICA: Clear status of GPEs before enabling them"
Revert commit c8b1917c89 ("ACPICA: Clear status of GPEs before
enabling them") that causes problems with Thunderbolt controllers
to occur if a dock device is connected at init time (the xhci_hcd
and thunderbolt modules crash which prevents peripherals connected
through them from working).

Commit c8b1917c89 effectively causes commit ecc1165b8b ("ACPICA:
Dispatch active GPEs at init time") to get undone, so the problem
addressed by commit ecc1165b8b appears again as a result of it.

Fixes: c8b1917c89 ("ACPICA: Clear status of GPEs before enabling them")
Link: https://lore.kernel.org/lkml/s5hy33siofw.wl-tiwai@suse.de/T/#u
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1132943
Reported-by: Michael Hirmke <opensuse@mike.franken.de>
Reported-by: Takashi Iwai <tiwai@suse.de>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-30 20:03:44 +02:00
Joerg Roedel
26ac2b6ee6 Merge branch 'for-joerg/arm-smmu/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu 2019-04-26 15:48:52 +02:00
Jonathan Chocron
4166bfe530 PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
Add driver for Amazon's Annapurna Labs PCIe host controller.  The
controller is based on DesignWare's IP.

The controller doesn't support accessing the Root Port's config space via
ECAM, so we obtain its base address via an AMZN0001 device.

Furthermore, the DesignWare PCIe controller doesn't filter out config
transactions sent to devices 1 and up on its bus, so they are filtered by
the driver.

All subordinate buses do support ECAM access.

Implementing specific PCI config access functions involves:
 - Adding an init function to obtain the Root Port's base address from
   an AMZN0001 device.
 - Adding a new entry in the MCFG quirk array.

[bhelgaas: Note that there is no Kconfig option for this driver because it
is only intended for use with the generic ACPI host bridge driver.  This
driver is only needed because the DesignWare IP doesn't completely support
ECAM access to the root bus.]

Link: https://lore.kernel.org/lkml/1553774276-24675-1-git-send-email-jonnyc@amazon.com
Co-developed-by: Vladimir Aerov <vaerov@amazon.com>
Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
Signed-off-by: Vladimir Aerov <vaerov@amazon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-04-25 16:33:07 -05:00
Qian Cai
ab3a9f2ccc acpi/hmat: fix an uninitialized memory_target
The commit 665ac7e927 ("acpi/hmat: Register processor domain to its
memory") introduced an uninitialized "struct memory_target" that could
cause an incorrect branching.

drivers/acpi/hmat/hmat.c:385:6: warning: variable 'target' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
        if (p->flags & ACPI_HMAT_MEMORY_PD_VALID) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/hmat/hmat.c:392:6: note: uninitialized use occurs here
        if (target && p->flags & ACPI_HMAT_PROCESSOR_PD_VALID) {
            ^~~~~~
drivers/acpi/hmat/hmat.c:385:2: note: remove the 'if' if its condition
is always true
        if (p->flags & ACPI_HMAT_MEMORY_PD_VALID) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/hmat/hmat.c:369:30: note: initialize the variable 'target'
to silence this warning
        struct memory_target *target;
                                    ^
                                     = NULL

Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Fixes: 665ac7e927 ("acpi/hmat: Register processor domain to its memory")
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:24:38 +02:00
Alison Schofield
57f5cf6ed8 acpi/hmat: Update acpi_hmat_type enum with ACPI_HMAT_TYPE_PROXIMITY
ACPI 6.3 changed the subtable "Memory Subsystem Address Range Structure"
to "Memory Proximity Domain Attributes Structure".

Updating and renaming of the structure was included in commit:
ACPICA: ACPI 6.3: HMAT updates (9a8d961f1e)

Rename the enum type to match the subtable and structure naming.

Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:24:38 +02:00
Qian Cai
e174e78efa acpi/hmat: fix memory leaks in hmat_init()
The commit 665ac7e927 ("acpi/hmat: Register processor domain to its
memory") introduced some memory leaks below due to it fails to release
the heap memory in an error path, and then those statically-allocated
__initdata memory which reference them get freed during boot renders
those heap memory as leaks. Since it is valid to pass NULL to
acpi_put_table(), it is fine to call it even if acpi_get_table() returns
an error.

unreferenced object 0xc8ff8008349e9400 (size 128):
  comm "swapper/0", pid 1, jiffies 4294709236 (age 48121.476s)
  hex dump (first 32 bytes):
    00 d0 9e 34 08 80 ff 84 d8 00 43 11 00 10 ff ff  ...4......C.....
    00 00 00 00 ff ff ff ff 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000869d4503>] __kmalloc+0x568/0x600
    [<0000000070fd6afb>] alloc_memory_target+0x50/0xd8
    [<00000000efa2081e>] srat_parse_mem_affinity+0x58/0x5c
    [<000000008bfaef74>] acpi_parse_entries_array+0x1c8/0x2c0
    [<0000000022804877>] acpi_table_parse_entries_array+0x11c/0x138
    [<00000000ffe9cd34>] acpi_table_parse_entries+0x7c/0xac
    [<00000000a7023afd>] hmat_init+0x90/0x174
    [<00000000694a86c1>] do_one_initcall+0x2d8/0x5f8
    [<0000000024889da9>] do_initcall_level+0x37c/0x3fc
    [<000000009be02908>] do_basic_setup+0x38/0x50
    [<0000000037b3ac0a>] kernel_init_freeable+0x194/0x258
    [<00000000f5741184>] kernel_init+0x18/0x334
    [<000000007b30f423>] ret_from_fork+0x10/0x18
    [<000000006c7147a8>] 0xffffffffffffffff

Signed-off-by: Qian Cai <cai@lca.pw>
Fixes: 665ac7e927 ("acpi/hmat: Register processor domain to its memory")
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25 21:24:37 +02:00
Alexandru Gagniuc
ba11edc650 PCI/ACPI: Advertise _HPX Type 3 support via _OSC
_OSC now has a way to inform firmware that OS has the capability to
interpret _HPX Type 3 setting records.  This was added by the following
PCI Firmware Specification ECN:

  ECN:  _HPX and PCIe Completion Timeout related _OSC Enhancements
  Date:	September 12, 2018
  Affected Document: PCI Firmware Specification, Rev. 3.2

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23 16:38:16 -05:00
Jean-Philippe Brucker
5702ee2418 ACPI/IORT: Check ATS capability in root complex nodes
Root complex node in IORT has a bit telling whether it supports ATS or
not. Store this bit in the IOMMU fwspec when setting up a device, so it
can be accessed later by an IOMMU driver. In the future we'll probably
want to store this bit at the host bridge or SMMU rather than in each
endpoint.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-23 12:23:03 +01:00
Kefeng Wang
b0f65b9179 ACPI / DPTF: Use dev_get_drvdata()
Skip conversion to platform_device and use dev_get_drvdata() directly.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-23 10:57:12 +02:00
Gustavo A. R. Silva
c7d5f21e8d ACPI: event: replace strcpy() by strscpy()
The strcpy() function is being deprecated. Replace it by the safer
strscpy() and fix the following Coverity warnings:

"You might overrun the 15-character fixed-size string event->bus_id
by copying bus_id without checking the length."

"You might overrun the 20-character fixed-size string event->device_class
by copying device_class without checking the length."

Addresses-Coverity-ID: 139001 ("Copy into fixed size buffer")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-23 10:54:26 +02:00
Hans de Goede
c8afd03486 ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate
Commit 48402cee68 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from
resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early
on BYT/CHT as resume_from_noirq is set.

This means that on resume from hibernate dw_i2c_plat_resume() doesn't get
called by the restore_early callback, acpi_lpss_resume_early(). Instead it
should be called by the restore_noirq callback matching how things are done
when resume_from_noirq is set and we are doing a regular resume.

Change the restore_noirq callback to acpi_lpss_resume_noirq so that
dw_i2c_plat_resume() gets properly called when resume_from_noirq is set
and we are resuming from hibernate.

Likewise also change the poweroff_noirq callback so that
dw_i2c_plat_suspend gets called properly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139
Fixes: 48402cee68 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-18 16:46:45 +02:00
Shunyong Yang
5f21f3055a ACPI: property: restore _DSD data subnodes GUID comment
Commit 5f5e4890d5 ("ACPI / property: Allow multiple property
compatible _DSD entries") removed the comment of _DSD data subnodes
GUID.  Restore it.

Fixes: 5f5e4890d5 ("ACPI / property: Allow multiple property compatible _DSD entries")
Signed-off-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-17 09:55:27 +02:00
Kefeng Wang
36a2ba0775 ACPI/IORT: Reject platform device creation on NUMA node mapping failure
In a system where, through IORT firmware mappings, the SMMU device is
mapped to a NUMA node that is not online, the kernel bootstrap results
in the following crash:

  Unable to handle kernel paging request at virtual address 0000000000001388
  Mem abort info:
    ESR = 0x96000004
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000001388] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] SMP
  Modules linked in:
  CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15
  pstate: 80c00009 (Nzcv daif +PAN +UAO)
  pc : __alloc_pages_nodemask+0x13c/0x1068
  lr : __alloc_pages_nodemask+0xdc/0x1068
  ...
  Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
  Call trace:
   __alloc_pages_nodemask+0x13c/0x1068
   new_slab+0xec/0x570
   ___slab_alloc+0x3e0/0x4f8
   __slab_alloc+0x60/0x80
   __kmalloc_node_track_caller+0x10c/0x478
   devm_kmalloc+0x44/0xb0
   pinctrl_bind_pins+0x4c/0x188
   really_probe+0x78/0x2b8
   driver_probe_device+0x64/0x110
   device_driver_attach+0x74/0x98
   __driver_attach+0x9c/0xe8
   bus_for_each_dev+0x84/0xd8
   driver_attach+0x30/0x40
   bus_add_driver+0x170/0x218
   driver_register+0x64/0x118
   __platform_driver_register+0x54/0x60
   arm_smmu_driver_init+0x24/0x2c
   do_one_initcall+0xbc/0x328
   kernel_init_freeable+0x304/0x3ac
   kernel_init+0x18/0x110
   ret_from_fork+0x10/0x1c
  Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804)
  ---[ end trace dfeaed4c373a32da ]--

Change the dev_set_proximity() hook prototype so that it returns a
value and make it return failure if the PXM->NUMA-node mapping
corresponds to an offline node, fixing the crash.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-16 18:16:24 +01:00
Linus Torvalds
618d919cae libnvdimm fixes v5.1-rc6
- Compatibility fix for nvdimm-security implementations with a default
   zero-key.
 
 - Miscellaneous small fixes for out-of-bound accesses, cleanup after
   initialization failures, and missing debug messages.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJctQ6UAAoJEB7SkWpmfYgCV4AQAL18Kv0VJjeWzMirH+Q5B9Z2
 WdHzKBvOWUWx8HeUhQoTtP+QnWriXI37EmhD7S34mVJZdYXxIQJBESPpFF1IpjUi
 jMibrdgrPAzyXq+x6FS4gHwi8uwUwwHOYfBEPV+7UvA8Zi8AU+g1Sgl+FftY34Em
 ACWc8/BtMtnwr2xFZT/4brzDCyvVHTK7f9HB280Je7DU6ghjEAaRFqqFXgAAbQ+l
 HAOQz4GVweT/JUmu4cvABGwllTN3np4wR/ePKYdlZTVWpN02InECukiSFtgCWN4S
 +bKm5EMTGDprLtNDz3m1SDWPrGSkWkoEtmVZljAXepJzAcZ1qbEw4xe++Kqrgr0z
 YOawM0lMciTp78uiH797thYnS3fo5+Ccr0WE4lhrSC3kAZE+EfGvbyhv3T+Pz3M+
 Z3hEpz+gGNMBwby0AmCLJHfwyujztNBE5hnXcsL5dC6BXKHZGZSgsUllRcZJ+xJ1
 H6b5sdxmNvn7Ja0svhKJzfpP4j8v25v+KEns9VlbIejJAp62cQCmA1dHlGaC5pDc
 0g9mtPbYsEZjKQ5/5grHgtre+JYmYDAIKwS4UK11ZyChqR+tmZ2Cp7XgmVab9a7T
 QpFLczMV/Q8NSWIFYSHvXjj1/PWtUxf81lEtA+Y3+mDznn30QctPwufPcdxeTNJs
 KSyFKhhKIOnasEplrLu4
 =zISv
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-fixes-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "I debated holding this back for the v5.2 merge window due to the size
  of the "zero-key" changes, but affected users would benefit from
  having the fixes sooner. It did not make sense to change the zero-key
  semantic in isolation for the "secure-erase" command, but instead
  include it for all security commands.

  The short background on the need for these changes is that some NVDIMM
  platforms enable security with a default zero-key rather than let the
  OS specify the initial key. This makes the security enabling that
  landed in v5.0 unusable for some users.

  Summary:

   - Compatibility fix for nvdimm-security implementations with a
     default zero-key.

   - Miscellaneous small fixes for out-of-bound accesses, cleanup after
     initialization failures, and missing debug messages"

* tag 'libnvdimm-fixes-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  tools/testing/nvdimm: Retain security state after overwrite
  libnvdimm/pmem: fix a possible OOB access when read and write pmem
  libnvdimm/security, acpi/nfit: unify zero-key for all security commands
  libnvdimm/security: provide fix for secure-erase to use zero-key
  libnvdimm/btt: Fix a kmemdup failure check
  libnvdimm/namespace: Fix a potential NULL pointer dereference
  acpi/nfit: Always dump _DSM output payload
2019-04-15 16:48:51 -07:00
Zhang Rui
13e962140b ACPI: button: reinitialize button state upon resume
With commit dfa46c50f6 ("ACPI / button: Fix an issue in
button.lid_init_state=ignore mode"), the lid device is considered to be
not compliant to SW_LID if the Lid state is unchanged when updating it.

This is not wrong, but we overlooked the resume case, where Lid state is
updated unconditionally in the button driver .resume() callback. And this
results in warning message "ACPI: button: The lid device is not compliant
to  SW_LID." after resume, if the machine is suspended with Lid opened and
then resumed with Lid opened.

Fix this by flushing the cached lid state before updating the Lid device
in .resume() callback.

Fixes: dfa46c50f6 ("ACPI / button: Fix an issue in button.lid_init_state=ignore mode")
Reported-and-tested-by: Zhao Lijian <lijian.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-12 10:29:01 +02:00
Rafael J. Wysocki
f456277ee1 Merge back ACPICA changes for v5.2. 2019-04-12 09:59:56 +02:00
Sakari Ailus
d75f773c86 treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-09 14:19:06 +02:00
Erik Schmauss
df9271d69f ACPICA: Namespace: add check to avoid null pointer dereference
ACPICA commit 7586a625f9c34c3169efd88470192bf63119e31a

Some ACPICA userspace tools call acpi_ut_subsystem_shutdown() during
cleanup and dereference a null pointer when cleaning up the
namespace.

Link: https://github.com/acpica/acpica/commit/7586a625
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 11:25:27 +02:00
Erik Schmauss
f49c90e895 ACPICA: utilities: fix spelling of PCC to platform_comm_channel
ACPICA commit 5e5c349e73982aea5d9f74416c0b2eea1b0767a1

Link: https://github.com/acpica/acpica/commit/5e5c349e
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 11:25:26 +02:00
Bob Moore
3278675567 ACPICA: Rename nameseg length macro/define for clarity
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d

ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE
This clarifies that this is the length of an individual
nameseg, not the length of a generic namestring/namepath.
Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/24870bd9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 11:24:48 +02:00
Bob Moore
5599fb6935 ACPICA: Rename nameseg compare macro for clarity
ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5

ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG
This clarifies (1) this is a compare on 4-byte namesegs, not
a generic compare. Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/92ec0935
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 10:08:28 +02:00
Bob Moore
a3ce7a8e0d ACPICA: Rename nameseg copy macro for clarity
ACPICA commit 19c18d3157945d1b8b64a826f0a8e848b7dbb127

ACPI_MOVE_NAME changed to ACPI_COPY_NAMESEG
This clarifies (1) this is a copy operation, and
(2) it operates on ACPI name_segs.
Improves understanding of the code.

Link: https://github.com/acpica/acpica/commit/19c18d31
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 10:08:28 +02:00
Erik Schmauss
c5781ffbbd ACPICA: Namespace: remove address node from global list after method termination
ACPICA commit b233720031a480abd438f2e9c643080929d144c3

ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.

During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.

Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.

A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.

Link: https://github.com/acpica/acpica/commit/b2337200
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475
Fixes: 4abb951b73 ("ACPICA: AML interpreter: add region addresses in global list during initialization")
Reported-by: Michael J Gruber <mjg@fedoraproject.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09 10:05:11 +02:00
Rafael J. Wysocki
fbc9418f09 ACPI: PM: Print debug messages when enabling GPEs for wakeup
In sufficiently complicated GPE configurations it is hard to
determine which GPE could be the source of system wakeup from a sleep
state, so make __acpi_device_wakeup_enable() print that information
to the kernel log if debugging is enabled.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-08 12:54:25 +02:00
Linus Torvalds
b512f71221 ACPI fix for 5.1-rc4
Prevent stale GPE events from triggering spurious system wakeups from
 suspend-to-idle (Furquan Shaikh).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcpmWiAAoJEILEb/54YlRxqHIP/22TfLZTQoPOd3+6K12YDETU
 OnV4+xX1k8/tVU5Xz4wTDnUYSQpZ/A9VBIp7EFkth32H71vxn080FaJ6GubdM1W1
 iBLVJKjtR7ypdmbnDSCRyDePFBNxZ1hnXd53JtChetrPFm3cNk2Tl2CZfd1ms3Va
 6OvVw+CrwFOIulgLv9AsG7N4Jr0RFsjuAmUAAYre1ZRHiruJLCTvcKTMTzKqUFuX
 0p8MIe0N77ByjdcFdZOPe7YQrCZPqRHUn3Rr7Rep//U9esUWKmvQs7al/uCrXXTu
 iqw18okpqpe6w/BTShUziwGrdj0JP82UU5me8AalOrWJ7pddDphPuN8kjuHwTqy1
 nPndWYlZ536az+DJRiiHeVVs3ANG35wB/WYzI7cHVVn0ujpHUTiml+JM/OZYi8eW
 dECmTGJopWveC6PSCBDvUnrFM5v8z1k+CIoVu+Fo6SnWuksJeRBkl+rzl8nMMQhw
 +zhM01T+R7/Yi2wyoBoRSdgdRhI1xSwUJV88kUJqXLSZ8a5xNCXOep7PJKYuv5hA
 lVSO2o6+sWuz/N3PkqfZUu25lWos9+3sMzUCZ4exavQnwu/udG6w/LjW1j0bxH8L
 plaTYdeHTFl7WFvKptD8G1UAJ85C241EGIA73DxiNjwmrw039zLX1FBs46QNKB6L
 vXa+BMxQhrwUNoGAD3hZ
 =XLS7
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Prevent stale GPE events from triggering spurious system wakeups from
  suspend-to-idle (Furquan Shaikh)"

* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Clear status of GPEs before enabling them
2019-04-04 14:48:11 -10:00
Rafael J. Wysocki
b59fb7ef52 Merge branch 'acpica' into acpi
* acpica:
  ACPICA: Clear status of GPEs before enabling them
2019-04-04 22:08:47 +02:00
Keith Busch
d9e8844c7d acpi/hmat: Register memory side cache attributes
Register memory side cache attributes with the memory's node if HMAT
provides the side cache iniformation table.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch
8d59f5a2ca acpi/hmat: Register performance attributes
Save the best performance access attributes and register these with the
memory's node if HMAT provides the locality table. While HMAT does make
it possible to know performance for all possible initiator-target
pairings, we export only the local pairings at this time.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch
665ac7e927 acpi/hmat: Register processor domain to its memory
If the HMAT Subsystem Address Range provides a valid processor proximity
domain for a memory domain, or a processor domain matches the performance
access of the valid processor proximity domain, register the memory
target with that initiator so this relationship will be visible under
the node's sysfs directory.

Since HMAT requires valid address ranges have an equivalent SRAT entry,
verify each memory target satisfies this requirement.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:21 +02:00
Keith Busch
3accf7ae37 acpi/hmat: Parse and report heterogeneous memory
Systems may provide different memory types and export this information
in the ACPI Heterogeneous Memory Attribute Table (HMAT). Parse these
tables provided by the platform and report the memory access and caching
attributes to the kernel messages.

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:20 +02:00
Keith Busch
3bc0e8eb17 acpi: Add HMAT to generic parsing tables
The Heterogeneous Memory Attribute Table (HMAT) header has different
field lengths than the existing parsing uses. Add the HMAT type to the
parsing rules so it may be generically parsed.

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:20 +02:00
Keith Busch
60574d1e05 acpi: Create subtable parsing infrastructure
Parsing entries in an ACPI table had assumed a generic header
structure. There is no standard ACPI header, though, so less common
layouts with different field sizes required custom parsers to go through
their subtable entry list.

Create the infrastructure for adding different table types so parsing
the entries array may be more reused for all ACPI system tables and
the common code doesn't need to be duplicated.

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04 18:41:12 +02:00
Shameer Kolothum
24062fe858 perf/smmuv3: Enable HiSilicon Erratum 162001800 quirk
HiSilicon erratum 162001800 describes the limitation of
SMMUv3 PMCG implementation on HiSilicon Hip08 platforms.

On these platforms, the PMCG event counter registers
(SMMU_PMCG_EVCNTRn) are read only and as a result it
is not possible to set the initial counter period value
on event monitor start.

To work around this, the current value of the counter
is read and used for delta calculations. OEM information
from ACPI header is used to identify the affected hardware
platforms.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[will: update silicon-errata.txt and add reason string to acpi match]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04 16:49:22 +01:00
Neil Leeder
24e5160493 ACPI/IORT: Add support for PMCG
Add support for the SMMU Performance Monitor Counter Group
information from ACPI. This is in preparation for its use
in the SMMUv3 PMU driver.

Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04 13:44:05 +01:00
Rafael J. Wysocki
5a25e3f7cc cpufreq: intel_pstate: Driver-specific handling of _PPC updates
In some cases, the platform firmware disables or enables turbo
frequencies for all CPUs globally before triggering a _PPC change
notification for one of them.  Obviously, that global change affects
all CPUs, not just the notified one, and it needs to be acted upon by
cpufreq.

The intel_pstate driver is able to detect such global changes of
the settings, but it also needs to update policy limits for all
CPUs if that happens, in particular if turbo frequencies are
enabled globally - to allow them to be used.

For this reason, introduce a new cpufreq driver callback to be
invoked on _PPC notifications, if present, instead of simply
calling cpufreq_update_policy() for the notified CPU and make
intel_pstate use it to trigger policy updates for all CPUs
in the system if global settings change.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200759
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-04-01 23:43:05 +02:00
Zhang Rui
aefa763b18 ACPI: video: Use vendor backlight on Sony VPCEH3U1E
On Sony Vaio VPCEH3U1E, ACPI backlight control does not work, and native
backlight works. Thus force use vendor backlight control on this system.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202401
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01 11:04:54 +02:00
Andy Shevchenko
257f9053c0 ACPI / utils: Remove deprecated function since no user left
There is no more user of acpi_dev_get_first_match_name(),
which is deprecated and has no user left, so, remove it for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01 11:00:16 +02:00
Andy Shevchenko
817b4d64da ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper
The acpi_dev_get_first_match_name() is missing put_device() call
and thus keeping reference counting unbalanced.

In order to fix the issue introduce a new helper to convert existing users
one-by-one to a better API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01 10:55:56 +02:00
Linus Torvalds
782492a7a4 ACPI fix for 5.1-rc3
Correct a previous attempt to make Linux use its own set of ACPI debug
 flags different from the upstream ACPICA's default (Erik Schmauss).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcnre0AAoJEILEb/54YlRxNl0QAKX5fcMQDnMqaK0+/fKKLjf3
 VS9rknPGa6QAu2CMGj/kz/di3sl2ceEOggwwcqb3l8YwHJBnh9kxB3fZ0Js0cBkY
 oMONQxPPI74txwkjM11qcRE8Pd2ET7VeXzmsa/4+5b3vh1bCnx3z4oXP5bS/HRSY
 RCYqD3XRPZzeGEUvtu4hjOLdDCPAl4ILv38XbgYeCfWzuctAfXchWJmTuCYgGqLH
 1gsTMEE7zqVVW4WO2B+qppZkoUU8rJkfD3TlWHbvy2gieqzTySUVvNKFjiUTR8q6
 Bc9QvMld2EQYTNRUa8KEqVT/qxWQWIEZBNihP5/GC/WrSk5Z+r/0r0d3ascMZSwI
 Y1gu4RQncSx5NymKuoJZQhztEE37JCt73dJ8AeBPD8yCk9Fabtbcs3a+sc7qAzAm
 IYMwTvVL5yfCe+7ktid15mbpbAUfV7Kse0oyCWJbFF4tgTtGE46hy/aLjp9ak3Vn
 tmRkrysmu2qyusO5JPIxGwVsU/E2iNMU6JacArvXrcWV2kacDtP0v98gZioA3CVu
 P58V/tOcv+nNNhtCogJwQv6X7O5qSZNYtNnHeqEyneSXenLOj5juYlvINjzI1GHt
 K5liF/opz6NngtXezxlTmvzFsxvS92CCPYHrjzmm8gCrrUK07AuCodmc8tobs3qL
 H3lS1+4V8d63/99Oj0kU
 =Ze64
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "This corrects a previous attempt to make Linux use its own set of ACPI
  debug flags different from the upstream ACPICA's default (Erik
  Schmauss)"

* tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: use different default debug value than ACPICA
2019-03-30 10:09:11 -07:00
Dave Jiang
d2e5b6436c libnvdimm/security, acpi/nfit: unify zero-key for all security commands
With zero-key defined, we can remove previous detection of key id 0 or null
key in order to deal with a zero-key situation. Syncing all security
commands to use the zero-key. Helper functions are introduced to return the
data that points to the actual key payload or the zero_key. This helps
uniformly handle the key material even with zero_key.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-30 08:27:07 -07:00
Furquan Shaikh
c8b1917c89 ACPICA: Clear status of GPEs before enabling them
Commit 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing
ACPI IRQs during suspend/resume") was added to stop clearing event
status bits unconditionally in the system-wide suspend and resume
paths. This was done because of an issue with a laptop lid appaering
to be closed even when it was used to wake up the system from suspend
(see https://bugzilla.kernel.org/show_bug.cgi?id=196249), which
happened because event status bits were cleared unconditionally on
system resume. Though this change fixed the issue in the resume path,
it introduced regressions in a few suspend paths.

First regression was reported and fixed in the S5 entry path by commit
fa85015c0d ("ACPICA: Clear status of all events when entering S5").
Next regression was reported and fixed for all legacy sleep paths by
commit f317c7dc12 ("ACPICA: Clear status of all events when entering
sleep states").  However, there still is a suspend-to-idle regression,
since suspend-to-idle does not follow the legacy sleep paths.

In the suspend-to-idle case, wakeup is enabled as part of device
suspend.  If the status bits of wakeup GPEs are set when they are
enabled, it causes a premature system wakeup to occur.

To address that problem, partially revert commit 18996f2db9 to
restore GPE status bits clearing before the GPE is enabled in
acpi_ev_enable_gpe().

Fixes: 18996f2db9 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Signed-off-by: Furquan Shaikh <furquan@google.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-28 10:27:02 +01:00
Bjorn Helgaas
2e018c59fe ACPI / tables: Clean up whitespace
Cleanup some whitespace to match the rest of the file.  No functional
change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-26 22:39:39 +01:00
Bjorn Helgaas
5ceb5f0522 ACPI / scan: Add labels for PNP button devices
Subsequent code treats button_device_ids[] entries differently, and
it's hard to follow without a hint as to which is which.

Add comments to identify the power button, lid, and sleep button
devices.

The "PNP" prefix is owned by Microsoft, so they distribute the
canonical list of "PNP" IDs.

Link: https://uefi.org/PNP_ACPI_Registry
Link: https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/devids.txt
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-26 22:36:46 +01:00
Bjorn Helgaas
40381a3c1f ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package()
acpi_bus_extract_wakeup_device_power_package() is a static function
with a single caller that supplies (device->handle, &device->wakeup).

Simplify the interface so the caller need only supply "device".

This makes it obvious that "wakeup", i.e., &device->wakeup, can never
be NULL, so remove the unnecessary check for that.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-26 22:36:46 +01:00
Bjorn Helgaas
603fadf336 ACPI: Fix comment typos
Fix some misspellings in comments.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-26 22:33:43 +01:00
Srinivas Pandruvada
edef1ef134 ACPI / CPPC: Fix guaranteed performance handling
As per the ACPI specification, "Guaranteed Performance Register" is
a "Buffer" field and it cannot be "Integer", so treat the "Integer"
type for "Guaranteed Performance Register" field as invalid and
ignore its value in that case.

Also save one cpc_read() call when "Guaranteed Performance Register"
is not present, which means a register defined as:
"Register(SystemMemory, 0, 0, 0, 0)".

Fixes: 29523f0953 ("ACPI / CPPC: Add support for guaranteed performance")
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25 23:57:21 +01:00
Erik Schmauss
aa9aaa4d61 ACPI: use different default debug value than ACPICA
Rather than setting debug output flags during early init, its makes
more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for
Linux.

ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d

Link: https://github.com/acpica/acpica/commit/60903715
Fixes: ce5cbf5349 ("ACPI: Set debug output flags independent of ACPICA")
Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-25 10:45:59 +01:00
Dan Williams
351f339faa acpi/nfit: Always dump _DSM output payload
The dynamic-debug statements for command payload output only get emitted
when the command is not ND_CMD_CALL. Move the output payload dumping
ahead of the early return path for ND_CMD_CALL.

Fixes: 31eca76ba2 ("...whitelisted dimm command marshaling mechanism")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-22 16:19:18 -07:00
Andy Shevchenko
54e3aca84e ACPI / utils: Drop reference in test for device presence
When commit 8661423eea ("ACPI / utils: Add new acpi_dev_present
helper") introduced acpi_dev_present(), it missed the fact that
bus_find_device() took a reference on the device found by it and
the callers of acpi_dev_present() don't drop that reference.

Drop the reference on the device in acpi_dev_present().

Fixes: 8661423eea ("ACPI / utils: Add new acpi_dev_present helper")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-19 22:34:21 +01:00
Linus Torvalds
f67e3fb489 device-dax for 5.1
* Replace the /sys/class/dax device model with /sys/bus/dax, and include
   a compat driver so distributions can opt-in to the new ABI.
 
 * Allow for an alternative driver for the device-dax address-range
 
 * Introduce the 'kmem' driver to hotplug / assign a device-dax
   address-range to the core-mm.
 
 * Arrange for the device-dax target-node to be onlined so that the newly
   added memory range can be uniquely referenced by numa apis.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJchWpGAAoJEB7SkWpmfYgCJk8P/0Q1DINszUDO/vKjJ09cDs9P
 Jw3it6GBIL50rDOu9QdcprSpwYDD0h1mLAV/m6oa3bVO+p4uWGvnxaxRx2HN2c/v
 vhZFtUDpHlqR63vzWMNVKRprYixCRJDUr6xQhhCcE3ak/ELN6w7LWfikKVWv15UL
 MfR96IQU38f+xRda/zSXnL9606Dvkvu/inEHj84lRcHIwj3sQAUalrE8bR3O32gZ
 bDg/l5kzT49o8ZXUo/TegvRSSSZpJmOl2DD0RW+ax5q3NI2bOXFrVDUKBKxf/hcQ
 E/V9i57TrqQx0GqRhnU7rN/v53cFZGGs31TEEIB/xs3bzCnADxwXcjL5b5K005J6
 vJjBA2ODBewHFK3uVx46Hy1iV4eCtZWj4QrMnrjdSrjXOfbF5GTbWOhPFgoq7TWf
 S7VqFEf3I2gDPaMq4o8Ej1kLH4HMYeor2NSOZjyvGn87rSZ3ZIQguwbaNIVl+itz
 gdDt0ZOU0BgOBkV+rZIeZDaGdloWCHcDPL15CkZaOZyzdWhfEZ7dod6ad+9udilU
 EUPH62RgzXZtfm5zpebYyjNVLbb9pLZ0nT+UypyGR6zqWx1SqU3mXi63NFXPco+x
 XA9j//edPeI6NHg2CXLEh8DLuCg3dG1zWRJANkiF+niBwyCR8CHtGWAoY6soXbKe
 2UrXGcIfXxyJ8V9v8v4q
 =hfa3
 -----END PGP SIGNATURE-----

Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull device-dax updates from Dan Williams:
 "New device-dax infrastructure to allow persistent memory and other
  "reserved" / performance differentiated memories, to be assigned to
  the core-mm as "System RAM".

  Some users want to use persistent memory as additional volatile
  memory. They are willing to cope with potential performance
  differences, for example between DRAM and 3D Xpoint, and want to use
  typical Linux memory management apis rather than a userspace memory
  allocator layered over an mmap() of a dax file. The administration
  model is to decide how much Persistent Memory (pmem) to use as System
  RAM, create a device-dax-mode namespace of that size, and then assign
  it to the core-mm. The rationale for device-dax is that it is a
  generic memory-mapping driver that can be layered over any "special
  purpose" memory, not just pmem. On subsequent boots udev rules can be
  used to restore the memory assignment.

  One implication of using pmem as RAM is that mlock() no longer keeps
  data off persistent media. For this reason it is recommended to enable
  NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
  at rest. We considered making this recommendation an actively enforced
  requirement, but in the end decided to leave it as a distribution /
  administrator policy to allow for emulation and test environments that
  lack security capable NVDIMMs.

  Summary:

   - Replace the /sys/class/dax device model with /sys/bus/dax, and
     include a compat driver so distributions can opt-in to the new ABI.

   - Allow for an alternative driver for the device-dax address-range

   - Introduce the 'kmem' driver to hotplug / assign a device-dax
     address-range to the core-mm.

   - Arrange for the device-dax target-node to be onlined so that the
     newly added memory range can be uniquely referenced by numa apis"

NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.

And apparently the PMEM modules can cause that a lot more than regular
RAM.  The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.

Quoting Dan from another email:
 "The exposure can be reduced in the volatile-RAM case by scanning for
  and clearing errors before it is onlined as RAM. The userspace tooling
  for that can be in place before v5.1-final. There's also runtime
  notifications of errors via acpi_nfit_uc_error_notify() from
  background scrubbers on the DIMM devices. With that mechanism the
  kernel could proactively clear newly discovered poison in the volatile
  case, but that would be additional development more suitable for v5.2.

  I understand the concern, and the need to highlight this issue by
  tapping the brakes on feature development, but I don't see PMEM as RAM
  making the situation worse when the exposure is also there via DAX in
  the PMEM case. Volatile-RAM is arguably a safer use case since it's
  possible to repair pages where the persistent case needs active
  application coordination"

* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: "Hotplug" persistent memory for use like normal RAM
  mm/resource: Let walk_system_ram_range() search child resources
  mm/memory-hotplug: Allow memory resources to be children
  mm/resource: Move HMM pr_debug() deeper into resource code
  mm/resource: Return real error codes from walk failures
  device-dax: Add a 'modalias' attribute to DAX 'bus' devices
  device-dax: Add a 'target_node' attribute
  device-dax: Auto-bind device after successful new_id
  acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
  device-dax: Add /sys/class/dax backwards compatibility
  device-dax: Add support for a dax override driver
  device-dax: Move resource pinning+mapping into the common driver
  device-dax: Introduce bus + driver model
  device-dax: Start defining a dax bus model
  device-dax: Remove multi-resource infrastructure
  device-dax: Kill dax_region base
  device-dax: Kill dax_region ida
2019-03-16 13:05:32 -07:00
Linus Torvalds
3b319ee220 Additional ACPI updates for 5.1-rc1
- Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko).
 
  - Prevent user space from getting confusing error values on failing
    ACPI sysfs accesses (Rafael Wysocki).
 
  - Simplify leaf node detection in the PPTT parsing code by using a
    new flag defined in ACPI 6.3 (Jeremy Linton).
 
  - Add missing "static" in some places in the ACPI configfs code
    (Andy Shevchenko).
 
  - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcijY5AAoJEILEb/54YlRxqzoQALCG1rWtVqmLw1yHj4BjI3Q5
 /4UeVUAhy/YkwlhG1hD5098AMIGXgT88sIOE0vBRUp0mIy01qNg0k59iivmTIlaX
 pIPJLUj46Siu0qbOKWYnZ0VULVvYF/scvgR4j9wHZIkvnxdb9/0ous6e5Il6CALM
 hgIJrPZHXgt9IilUQYx6nqiF4Lfpa9RFwudkVmt7DRAmJOOT3To/Sbo8WvGIaeVK
 MQSqyM3GhWq4MWdyrLZF9U8o6+pKBM6YKnrqkWufxW0ZT5QfpORFkrd5NbrBynCm
 ec26sRRC73mhSU6tB+iyhNrrn/IxzVC9x7UFK6VtWDQXn2ROr2MixxspPRKKA36I
 RGYN1HChx7mWR6bOOplj4IijpHJmXjKz4PvqqmwQAHUPrxr02R9xaoLk/4dPVztx
 mmUMCO2UB6ZR5USyV5AqWvFi8Gyd2zqTQEIbWMghn1AvbJdwF0RanzO4DfX+iybW
 Jrx8UDNSI9ndscslYjFzcuIw/+15Yq55f5jEm3VEsAsJHE94VCgxCNjym762RKFo
 2xMuXRvr0vQJ/mI+sgISqop4lK90mB1cw8lgs2XGqWoqNWgx0ZQ7xElavEzBtG60
 Btg9cNFu4SfmSfE44IL4qTYtI1gM+FtMYMbsHS2XjJRcJcWVLiwd0tQXyDkYEmy0
 z1P6QQKtwNcIHj/HyByT
 =mxN+
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These fix a couple of issues and do some cleanups on top of the
  previous ACPI changes for 5.1-rc1.

  Specifics:

   - Fix a crash caused by unloading an SSDT overlay (Andy Shevchenko)

   - Prevent user space from getting confusing error values on failing
     ACPI sysfs accesses (Rafael Wysocki)

   - Simplify leaf node detection in the PPTT parsing code by using a
     new flag defined in ACPI 6.3 (Jeremy Linton)

   - Add missing "static" in some places in the ACPI configfs code (Andy
     Shevchenko)

   - Fix acpidbg tool path in the ACPI documentation (Flavio Suligoi)"

* tag 'acpi-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sysfs: Prevent get_status() from returning acpi_status
  ACPI / device_sysfs: Avoid OF modalias creation for removed device
  ACPI / configfs: Mark local data structures static
  ACPI / configfs: Mark local functions static
  ACPI: tables: Simplify PPTT leaf node detection
  ACPI: Documentation: Fix path for acpidbg tool
2019-03-14 10:48:14 -07:00
Linus Torvalds
dc2535be1f We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
 hardware out there and the normal small fixes and updates, but then we
 have some core framework changes too.
 
 In the core framework, we introduce support for a clk_get_optional() API
 to get clks that may not always be populated and a way to devm manage clkdev
 lookups registered by provider drivers. We also do some refactoring to simplify
 the interface between clkdev and the common clk framework so we can reuse the DT
 parsing and clk_get() path in provider drivers in the future. This work will
 continue in the next few cycles while we convert how providers specify clk
 parents.
 
 On the driver side, the biggest part of the dirstat is the Amlogic clk driver
 that got support for the G12A SoC. It dominates with almost half the overall
 diff, while the second largest part of the diff is in the i.MX clk driver
 that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
 and Qualcomm drivers rounding out the big part of the dirstat because they both
 got new hardware support for SoCs. The rest is just various updates and non-critical
 fixes for existing drivers.
 
 Core:
  - Convert a few clk bindings to JSON schema format
  - Add a {devm_}clk_get_optional() API
  - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
  - Start rewriting clk parent registration and supporting device links
    by moving around code that supports clk_get() and DT parsing of the
    'clocks' property
 
 New Drivers:
  - Add Qualcomm MSM8998 RPM managed clks
  - IPA clk support on Qualcomm RPMh clk controllers
  - Actions Semi S500 SoC clk support
  - Support for fixed rate clks populated from an MMIO register
  - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
  - Add TMU (timer) clocks on Renesas RZ/G2E
  - Add Amlogic G12A Always-On Clock Controller
  - Add 32k clock generation for Amlogic AXG
  - Add support for the Mali GPU clocks on Amlogic Meson8
  - Add Amlogic G12A EE clock controller driver
  - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
  - Add i.MX8MM SoC clk driver support
 
 Removed Drivers:
  - Remove clps711x driver as the board support is gone
 
 Updates:
  - 3rd ECO fix for Mediatek MT2712 SoCs
  - Updates for Qualcomm MSM8998 GCC clks
  - Random static analysis fixes for clk drivers
  - Support for sleeping gpios in the clk-gpio type
  - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
  - Split LCDC into two clks on the Marvell MMP2 SoC
  - Various DT of_node refcount fixes
  - Get rid of CLK_IS_BASIC from TI code (yay!)
  - TI Autoidle clk support
  - Fix Amlogic Meson8 APB clock ID name
  - Claim input clocks through DT for Amlogic AXG and GXBB
  - Correct the DU (display unit) parent clock on Renesas RZ/G2E
  - Exynos5433 IMEM CMU crypto clk support (SlimSS)
  - Fix for the PLL-MIPI on the Allwinner A23
  - Fix Rockchip rk3328 PLL rate calculation
  - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
  - i.MX SCU clk driver clk_set_parent() and cpufreq support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlyIK9URHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtIA//SRHcUJBuF7bgLs0GWDL/C0WwQf90bgLn
 83jMUX9MCIS+/RBEUi/Xf9psGVaW3YPEAiRcYUeI1YIZhCrdZHp2YGClKOpXaXth
 vgM7Je+6Say+7ru6J9eHqhbEgx2e+HqT4shxK5I5J0SqMFgdugim4pthk+Lr/WL0
 bMdNHTERZUFrIId10RxuCH7D72nhkwiRkwNDfWjASKoH3spXLKC1vl/wbS5QDE1O
 eXA9OwkonSyrBKX7zMeQiks6f7HWoJO7ei05Twv4CD9UEeS17KmB6mkbmT3GPAuq
 dWbLOnt7I80fMnthKLIR0IWtJuCvPv3jXgP+Fin+e4wutNCnuduHIVc2XeQYmDaX
 rbo/20q4DarL2AaakuowXA7UJ75zYfxPkwgpwcYZ/QW9yzT6QMfynAYekjJGTdt3
 6VootYAwYIsh1VMGZIQLs23AaNYayDy0QWx/prxnEi95lK/+zjqVySPYC/rWe7XQ
 rUrO6YY0YxRdf5uVHneIfIJGs5F/Q8DgdLXp4tf2Ud2YF1bZ0UQOUKehxwM0rxRX
 F9P6iP6mHUuUPMa9rDlwSmgQXDdqH7E5IbXdSPjEFBogBfmhJfVKAo1EyaZgUytZ
 Y42qG/P3fGGfegfWTRAoaDRJn/+HfEmtREdgQ8JO14xlZwRDb/M43IEiQP4zGwlc
 f/OuWu3O9xA=
 =D4Bv
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...
2019-03-14 08:46:17 -07:00
Rafael J. Wysocki
b6e88119f1 Merge branches 'acpi-tables', 'acpi-debug', 'acpi-doc' and 'acpi-misc'
* acpi-tables:
  ACPI: tables: Simplify PPTT leaf node detection

* acpi-debug:
  ACPI: sysfs: Prevent get_status() from returning acpi_status

* acpi-doc:
  ACPI: Documentation: Fix path for acpidbg tool

* acpi-misc:
  ACPI / configfs: Mark local data structures static
  ACPI / configfs: Mark local functions static
2019-03-14 10:54:28 +01:00
Linus Torvalds
5ea6718b1f libnvdimm for v5.1
* Fix nfit-bus command submission regression
 
 * Support retrieval of short-ARS results if the ARS state is "requires
   continuation", and even if the "no_init_ars" module parameter is
   specified.
 
 * Allow busy-polling of the kernel ARS state by allowing root to reset
   the exponential back-off timer.
 
 * Filter potentially stale ARS results by tracking query-ARS relative to
   the previous start-ARS.
 
 * Enhance dax_device alignment checks
 
 * Add support for the Hyper-V family of device-specific-methods (DSMs)
 
 * Add several fixes and workarounds for Hyper-V compatibility.
 
 * Fix support to cache the dirty-shutdown-count at init.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJchsnlAAoJEB7SkWpmfYgCzNcP+gIsRwy2nklV78CoIX9rMOF+
 8AF/o3kb+XbAGziTkFRk5SXsAGLQl1PNTzfaJDiBfS0vX6c3ja4cDhX4wgLi/w1c
 2opBA3Fd1qAk2XXkOtQQ+yqFFxXR3zFV+Iflue39XJhwgR0yoY10mKEIGkelMur5
 kOZjfWA6qseVGlyujHoM4Ta19Le88S3Yx1Da2jYTxHOYYnpRqq/epuO3hqojL/CT
 GIrJFD6ayyuGjeA4CD3LsDAGgISQbLSRg1DXbCebmIsuoQ9TZeD7egqxjWKutcSU
 xQVbI7Dw/dUKnAdo4DO9x0kMKV7XWDfpPOk4eZc3TSY/2g7muatsc3ZhY347F4Ia
 3R9ox23WS1hd41jGbYT1CeKPvTnqnIZ6zwCEIRTq+exXSEp+lzOdF3De6olMcgYR
 b37aKCR3PNZwF+esQ1XLA7tHLbLfdjY/TcFQET9i4vUMOlC/NeVpJY6g4kgd/1Lu
 MNHu5NxTGtuK6Hp8zJESQ4X+yhhIMPd5VwOeDOjTzuLwgMA2c4MtXeZTABfuBe1W
 bN6Kthv8mk5+CnEvXZDAEdSRijTo8inTmYQuIyaLSkWFhvANHKZX4xTc9VVhTW2I
 8IONqBD3ZtFW+z+qTRB3VbOp7qj3/gA7F+T5C+MV8gj/YAO6hCzGYq8kUtQ4FeuO
 OZwXxuFYY+iOOF1XEM3f
 =wt4z
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has been in -next since before the merge window
  opened, with no known collisions / issues reported.

  The only detail worth noting, outside the summary below, is that the
  "libnvdimm-start-pad" topic has been truncated to just cleanups and
  small fixes. The full topic branch would have doubled down on hacks
  around the "section alignment" limitation of the core-mm, instead
  effort is now being spent to address that root issue in the memory
  hotplug implementation for v5.2.

   - Fix nfit-bus command submission regression

   - Support retrieval of short-ARS results if the ARS state is
     "requires continuation", and even if the "no_init_ars" module
     parameter is specified

   - Allow busy-polling of the kernel ARS state by allowing root to
     reset the exponential back-off timer

   - Filter potentially stale ARS results by tracking query-ARS relative
     to the previous start-ARS

   - Enhance dax_device alignment checks

   - Add support for the Hyper-V family of device-specific-methods
     (DSMs)

   - Add several fixes and workarounds for Hyper-V compatibility

   - Fix support to cache the dirty-shutdown-count at init"

* tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits)
  libnvdimm/namespace: Clean up holder_class_store()
  libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings
  acpi/nfit: Update NFIT flags error message
  libnvdimm/btt: Fix LBA masking during 'free list' population
  libnvdimm/btt: Remove unnecessary code in btt_freelist_init
  libnvdimm/pfn: Remove dax_label_reserve
  dax: Check the end of the block-device capacity with dax_direct_access()
  nfit/ars: Avoid stale ARS results
  nfit/ars: Allow root to busy-poll the ARS state machine
  nfit/ars: Introduce scrub_flags
  nfit/ars: Remove ars_start_flags
  nfit/ars: Attempt short-ARS even in the no_init_ars case
  nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot
  acpi/nfit: Require opt-in for read-only label configurations
  libnvdimm/pmem: Honor force_raw for legacy pmem regions
  libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init()
  libnvdimm: Fix altmap reservation size calculation
  libnvdimm, pfn: Fix over-trim in trim_pfn_device()
  acpi/nfit: Fix bus command validation
  libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family
  ...
2019-03-13 09:41:18 -07:00
Rafael J. Wysocki
3fd16d7016 ACPI: sysfs: Prevent get_status() from returning acpi_status
The return value of get_status() is passed to user space on errors,
so it should not return acpi_status values then.  Make it return
error values that are meaningful for user space instead.

This also makes a Clang warning regarding the initialization of a
local variable in get_status() go away.

Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12 10:34:58 +01:00
Andy Shevchenko
f16eb8a4b0 ACPI / device_sysfs: Avoid OF modalias creation for removed device
If SSDT overlay is loaded via ConfigFS and then unloaded the device,
we would like to have OF modalias for, already gone. Thus, acpi_get_name()
returns no allocated buffer for such case and kernel crashes afterwards:

 ACPI: Host-directed Dynamic ACPI Table Unload
 ads7950 spi-PRP0001:00: Dropping the link to regulator.0
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 #PF error: [normal kernel read fault]
 PGD 80000000070d6067 P4D 80000000070d6067 PUD 70d0067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 40 Comm: kworker/u4:2 Not tainted 5.0.0+ #96
 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
 Workqueue: kacpi_hotplug acpi_device_del_work_fn
 RIP: 0010:create_of_modalias.isra.1+0x4c/0x150
 Code: 00 00 48 89 44 24 18 31 c0 48 8d 54 24 08 48 c7 44 24 10 00 00 00 00 48 c7 44 24 08 ff ff ff ff e8 7a b0 03 00 48 8b 4c 24 10 <0f> b6 01 84 c0 74 27 48 c7 c7 00 09 f4 a5 0f b6 f0 8d 50 20 f6 04
 RSP: 0000:ffffa51040297c10 EFLAGS: 00010246
 RAX: 0000000000001001 RBX: 0000000000000785 RCX: 0000000000000000
 RDX: 0000000000001001 RSI: 0000000000000286 RDI: ffffa2163dc042e0
 RBP: ffffa216062b1196 R08: 0000000000001001 R09: ffffa21639873000
 R10: ffffffffa606761d R11: 0000000000000001 R12: ffffa21639873218
 R13: ffffa2163deb5060 R14: ffffa216063d1010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffffa2163e000000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000007114000 CR4: 00000000001006f0
 Call Trace:
  __acpi_device_uevent_modalias+0xb0/0x100
  spi_uevent+0xd/0x40

 ...

In order to fix above let create_of_modalias() check the status returned
by acpi_get_name() and bail out in case of failure.

Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201381
Reported-by: Ferry Toth <fntoth@gmail.com>
Tested-by: Ferry Toth<fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12 09:56:18 +01:00
Andy Shevchenko
bf567dd389 ACPI / configfs: Mark local data structures static
There is no need to have non-static local data structures. otherwise
sparse is not happy:

  CHECK   drivers/acpi/acpi_configfs.c
drivers/acpi/acpi_configfs.c💯31: warning: symbol 'acpi_table_bin_attrs' was not declared. Should it be static?
drivers/acpi/acpi_configfs.c:196:27: warning: symbol 'acpi_table_attrs' was not declared. Should it be static?
drivers/acpi/acpi_configfs.c:236:34: warning: symbol 'acpi_table_group_ops' was not declared. Should it be static?

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12 09:50:56 +01:00
Andy Shevchenko
c62c15a924 ACPI / configfs: Mark local functions static
There is no need to have non-static local functions. otherwise
compiler is not happy:

  CC [M]  drivers/acpi/acpi_configfs.o
drivers/acpi/acpi_configfs.c:105:9: warning: no previous prototype for ‘acpi_table_signature_show’ [-Wmissing-prototypes]
 ssize_t acpi_table_signature_show(struct config_item *cfg, char *str)
         ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/acpi_configfs.c:115:9: warning: no previous prototype for ‘acpi_table_length_show’ [-Wmissing-prototypes]
 ssize_t acpi_table_length_show(struct config_item *cfg, char *str)
         ^~~~~~~~~~~~~~~~~~~~~~
...

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-12 09:50:56 +01:00
Dan Williams
4083014e32 Merge branch 'for-5.1/nfit/ars' into libnvdimm-for-next
Merge several updates to the ARS implementation. Highlights include:

* Support retrieval of short-ARS results if the ARS state is "requires
  continuation", and even if the "no_init_ars" module parameter is
  specified.
* Allow busy-polling of the kernel ARS state by allowing root to reset
  the exponential back-off timer.
* Filter potentially stale ARS results by tracking query-ARS relative to
  the previous start-ARS.
2019-03-11 12:37:55 -07:00
Dan Williams
451fed24e9 Merge branch 'for-5.1/libnvdimm' into libnvdimm-for-next
Merge miscellaneous libnvdimm sub-system updates for v5.1. Highlights
include:

* Support for the Hyper-V family of device-specific-methods (DSMs)
* Several fixes and workarounds for Hyper-V compatibility.
* Fix for the support to cache the dirty-shutdown-count at init.
2019-03-11 12:13:42 -07:00
Jeremy Linton
4909e6df21 ACPI: tables: Simplify PPTT leaf node detection
ACPI 6.3 bumps the PPTT table revision and adds a LEAF_NODE flag.

This allows us to avoid a second pass through the table to assure
that the node in question is a leaf.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-11 12:14:57 +01:00
Linus Torvalds
dbbdf54c72 platform-drivers-x86 for v5.1-1
Use MODULE_DEVICE_TABLE across several wmi drivers, keeping
 wmi_device_id and MODULE_ALIAS() declarations in sync. Add several
 Ideapad models to the no_hw_rfkill list. Add support for new Mellanox
 platforms, including new fan and LED functionality. Address Dell
 keyboard backlight change event and power button release issues. Update
 dell_rbu to use appropriate memory allocation mechanisms. Several small
 fixes and Ice Lake support for intel_pmc_core. Fix a suspend regression
 for Cherry Trail based devices in intel_int0002_vgpio. A few other
 routine fixes.
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI / scan:
  -  Create platform device for BSG2150 ACPI nodes
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Correct mlxreg-io KernelVersion for 5.0
 
 MAINTAINERS:
  -  Include mlxreg.h in Mellanox Platform Driver files
 
 asus-wmi:
  -  Allow loading on systems without the Asus Management GUID
 
 dell-smbios-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  -  Ignore new keyboard backlight change event
 
 dell-wmi-descriptor:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell_rbu:
  -  fix lock imbalance in img_update_realloc
  -  stop abusing the DMA API
 
 huawei-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 ideapad-laptop:
  -  Add ideapad 330-15ICH to no_hw_rfkill
  -  Add S130-14IGM to no_hw_rfkill list
  -  Add Ideapad 530S-14ARR to no_hw_rfkill list
  -  Add Yoga C930 to no_hw_rfkill_list
  -  Add Y530-I5ICH-1060 to no_hw_rfkill list
  -  Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
 
 intel-hid:
  -  Missing power button release on some Dell models
 
 intel-wmi-thunderbolt:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 intel_int0002_vgpio:
  -  Only implement irq_set_wake on Bay Trail
 
 intel_pmc_core:
  -  Quirk to ignore XTAL shutdown
  -  Add Package cstates residency info
  -  Add ICL platform support
  -  Convert to INTEL_CPU_FAM6 macro
  -  Avoid a u32 overflow
  -  Include Reserved IP for LTR
  -  Fix file permissions for ltr_show
  -  Fix PCH IP name
  -  Fix PCH IP sts reading
  -  Handle CFL regmap properly
 
 leds:
  -  mlxreg: Add support for capability register
 
 mlx-platform:
  -  Fix access mode for fan_dir attribute
  -  Add UID LED for the next generation systems
  -  Add extra CPLD for next generation systems
  -  Add support for new VMOD0007 board name
  -  Add support for fan capability registers
  -  Add support for fan direction register
 
 modpost:
  -  file2alias: define size of alias
 
 platform/mellanox:
  -  mlxreg-hotplug: Fix KASAN warning
 
 platform_data/mlxreg:
  -  Add capability field to core platform data
  -  Document fixes for core platform data
 
 touchscreen_dmi:
  -  Add info for the CHUWI Hi10 Air tablet
  -  Add info for the Chuwi Hi8 Air tablet
  -  Add info for the PoV Wintab P1006w (v1.0) tablet
 
 wmi:
  -  add WMI support to MODULE_DEVICE_TABLE()
  -  move struct wmi_device_id to mod_devicetable.h
  -  fix potential null pointer dereference
 
 wmi-bmof:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 x86/CPU:
  -  Add Icelake model number
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9M1dh6j+oEL41EZIXFIlAfdBhuEFAlyCu1EACgkQXFIlAfdB
 huFASAf/d0Y6uqhLD3G7cL2kXjOWoTE9ouWUwv19bBpnohGmD3OMMap4y1lb6nRR
 thCJRhpmX4ObS2adAC4otiOxTzmVoYGsuS9kfBwhKIby2VYHCCxxaTUs6bzMdOfV
 GsbaMA+vfb29bU4DcWlRtYZIz2FC5oyjW4ZmcMA6KtuBGjG9K1fG5zANQe4H8I0e
 zCdcrXhpDGIBJgaJR2N42EUCJruPoEXYfHa1G4B/QKvuW0CXHAdSE0YrN4ju+S3e
 Ew9ZXhoxRaqlu+ZB7H5Kyy6Mg3ZGMzbeYyQFLk5f2yiKSTFNiqwTEJl1aE2JSpy3
 g8Im+6E44/4G8QOL40g5XwmrxHw5mA==
 =Bx4o
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - use MODULE_DEVICE_TABLE across several wmi drivers, keeping
   wmi_device_id and MODULE_ALIAS() declarations in sync

 - add several Ideapad models to the no_hw_rfkill list

 - add support for new Mellanox platforms, including new fan and LED
   functionality

 - address Dell keyboard backlight change event and power button release
   issues

 - update dell_rbu to use appropriate memory allocation mechanisms

 - several small fixes and Ice Lake support for intel_pmc_core

 - fix a suspend regression for Cherry Trail based devices in
   intel_int0002_vgpio

 - a few other routine fixes

* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
  MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
  platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
  platform/x86: mlx-platform: Fix access mode for fan_dir attribute
  platform/x86: mlx-platform: Add UID LED for the next generation systems
  platform/x86: mlx-platform: Add extra CPLD for next generation systems
  platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
  platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
  modpost: file2alias: define size of alias
  platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
  platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
  platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
  platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
  platform/x86: intel_pmc_core: Add Package cstates residency info
  platform/x86: intel_pmc_core: Add ICL platform support
  ...
2019-03-10 13:16:37 -07:00
Stephen Boyd
75f486c015 Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next
- Updates for qcom MSM8998 GCC clks
 - qcom MSM8998 RPM managed clks
 - Random static analysis fixes for clk drivers

* clk-qcom-msm8998:
  clk: qcom: Make common clk_hw registrations
  clk: qcom: smd: Add support for MSM8998 rpm clocks
  clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
  clk: qcom: Add missing freq for usb30_master_clk on 8998
  clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks

* clk-fractional-parent:
  clk: fractional-divider: check parent rate only if flag is set

* clk-x86-mv:
  clk: x86: Move clk-lpss.h to platform_data/x86

* clk-SA-fixes:
  clk: mediatek: fix platform_no_drv_owner.cocci warnings
  clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
  clk: qoriq: Improve an error message
2019-03-08 10:29:15 -08:00
Linus Torvalds
851ca779d1 drm next pull request for 5.1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcfzdFAAoJEAx081l5xIa+QxsP/A6QP+gx4vQ8XXikaJMNz89e
 59TAbXHW/2qFMHRtUesuB2bc1a2cw2ppFsrryG7c4HqjKDDHna7Yx2JzZYL0MmNh
 SpJYL4yMuu/2TmyCouaAYzzP+5Supdosfif4LRn3269DH0i5MWXL+NVrbeB47blG
 XwjQTu46yfn06IFAo5bI2jMqSuPCDd4Hzpyixpvmjt+r16XwoH5nGUrDCHG8t/jV
 +PUZCYAjn71in6Z66MKZv/EVCVFfTnaVJ2KEgw7e+vWxnERkRh/xnRO6KIXMD5O1
 vo2qc2vbxkGpjaE6pDzC/2e5pRJT8Ks0t50jYjbVF+6nHpP5XIPvAXH4R2QdTA7B
 Jiu8N0oz6wj0H3AJ/V38rEHWW8zgOfXkhbRBfmfQ9NfgiEfwxqCVgspIOwei4oVw
 hvMXYUBM1CU+JIfW6w7ZT4oHALUlnCpnr5DQRdCNRm8zjClyNfIAoJIJrOtqmX44
 qjEzSgxb89ZtS7c0yislSBaovgAmcM3I+aq5I4xokdY0hFEZ6QomuKunyuQ8pBYa
 3gsvMEReLxETffhhYpjBt5+b5IgB49nf3Y38CKFurv32Sp0p0YgK0qVo8qRQHclj
 QIJ+3+zQMCX20swYpCWXhOPUIwtQppdKhWzg12my8rL2VgTlYhjlEbL4EL+Wk+hv
 6Ipulthzn0RyrSK9Dojh
 =GlRQ
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...
2019-03-08 08:23:15 -08:00
Linus Torvalds
d276709ce6 ACPI updates for 5.1-rc1
- Update the ACPICA code in the kernel to upstream revision 20190215
    including ACPI 6.3 support and more:
    * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
      Schmauss).
    * Update of the PCC Identifier structure in PDTT (Erik Schmauss).
    * Support for new Generic Affinity Structure subtable in SRAT
      (Erik Schmauss).
    * New PCC operation region support (Erik Schmauss).
    * Support for GICC statistical profiling for MADT (Erik Schmauss).
    * New Error Disconnect Recover notification support (Erik Schmauss).
    * New PPTT Processor Structure Flags fields support (Erik Schmauss).
    * ACPI 6.3 HMAT updates (Erik Schmauss).
    * GTDT Revision 3 support (Erik Schmauss).
    * Legacy module-level code (MLC) support removal (Erik Schmauss).
    * Update/clarification of messages for control method failures
      (Bob Moore).
    * Warning on creation of a zero-length opregion (Bob Moore).
    * acpiexec option to dump extra info for memory leaks (Bob Moore).
    * More ACPI error to firmware error conversions (Bob Moore).
    * Debugger fix (Bob Moore).
    * Copyrights update (Bob Moore).
 
  - Clean up sleep states support code in ACPICA (Christoph Hellwig).
 
  - Rework in_nmi() handling in the APEI code and add suppor for the
    ARM Software Delegated Exception Interface (SDEI) to it (James
    Morse).
 
  - Fix possible out-of-bounds accesses in BERT-related core (Ross
    Lagerwall).
 
  - Fix the APEI code parsing HEST that includes a Deferred Machine
    Check subtable (Yazen Ghannam).
 
  - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
    (YueHaibing).
 
  - Switch the APEI ERST code to the new generic UUID API (Andy
    Shevchenko).
 
  - Update the MAINTAINERS entry for APEI (Borislav Petkov).
 
  - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui).
 
  - Fix DMI checks handling in the ACPI backlight driver and add the
    "Lunch Box" chassis-type check to it (Hans de Goede).
 
  - Add support for using ACPI table overrides included in built-in
    initrd images (Shunyong Yang).
 
  - Update ACPI device enumeration to treat the PWM2 device as "always
    present" on Lenovo Yoga Book (Yauhen Kharuzhy).
 
  - Fix up the enumeration of device objects with the PRP0001 device
    ID (Andy Shevchenko).
 
  - Clean up PPTT parsing error messages (John Garry).
 
  - Clean up debugfs files creation handling (Greg Kroah-Hartman,
    Rafael Wysocki).
 
  - Clean up the ACPI DPTF Makefile (Masahiro Yamada).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfSIaAAoJEILEb/54YlRxvL8P/2oiG+u3tm3JahQ2tk9iiX3S
 4yjYMB5Gmhua3w/t6tnRHHhy3pjjgI6xH5S7WB0VPTMp57E91EQihcbLJNFiJ1Jf
 zjeZtWSmoxvcVwHAXq0DZHFMRK9Xgc/1ckzWNH/pwVlBSgaYazuLr6bwtZhtorci
 eNWi82abWfAp6kAXjzJkcFbEp9+H6JzseewKcT8VAKn63KZizCEzxT0PuE9c54km
 QnILVB9we0aGD2i0w2BRpbz99Wse0vnoUkBcrDw0LFHCaEQjfyAa94YFVQVrkE1Q
 ynH26+yQanyzH00q/HWuH7N7YdcYMYT1CgZoIKR5XtJ+CbTc63VQez4csLOgOFMM
 VEwmuv5SdRQ+tLCNFn71dxRheAttKI/nGBAZWMRTLQkp412IrQP4BtWw4wFM8SHZ
 3G7eReR/bBeS4u1T5KR8CVVxchinDdwnTvqQII1uEniX80AmsHsQZxtU+JdPDp+w
 N6gUE+lPF8e4iT+YsrWFMoNsJ9/MoXbSPQK1oYIcL0f5+PjFMxjTbA53wDiMHAhS
 9AqVW1fdSPX0ImV3DuDqHph3ekAt26QHKxIA2xj5WTRWKf+29ijO2+5zU8isT7kI
 RfGzpvsSYdvPyIRLUqc/Q3d5u/ElacAaaKJNT+6gUT4AkINAZJKQRiw2dWO1g82O
 HVuSc5hRfnAJ5ALfCdIG
 =r6fU
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These are ACPICA updates including ACPI 6.3 support among other
  things, APEI updates including the ARM Software Delegated Exception
  Interface (SDEI) support, ACPI EC driver fixes and cleanups and other
  assorted improvements.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190215
     including ACPI 6.3 support and more:
      * New predefined methods: _NBS, _NCH, _NIC, _NIH, and _NIG (Erik
        Schmauss).
      * Update of the PCC Identifier structure in PDTT (Erik Schmauss).
      * Support for new Generic Affinity Structure subtable in SRAT
        (Erik Schmauss).
      * New PCC operation region support (Erik Schmauss).
      * Support for GICC statistical profiling for MADT (Erik Schmauss).
      * New Error Disconnect Recover notification support (Erik
        Schmauss).
      * New PPTT Processor Structure Flags fields support (Erik
        Schmauss).
      * ACPI 6.3 HMAT updates (Erik Schmauss).
      * GTDT Revision 3 support (Erik Schmauss).
      * Legacy module-level code (MLC) support removal (Erik Schmauss).
      * Update/clarification of messages for control method failures
        (Bob Moore).
      * Warning on creation of a zero-length opregion (Bob Moore).
      * acpiexec option to dump extra info for memory leaks (Bob Moore).
      * More ACPI error to firmware error conversions (Bob Moore).
      * Debugger fix (Bob Moore).
      * Copyrights update (Bob Moore)

   - Clean up sleep states support code in ACPICA (Christoph Hellwig)

   - Rework in_nmi() handling in the APEI code and add suppor for the
     ARM Software Delegated Exception Interface (SDEI) to it (James
     Morse)

   - Fix possible out-of-bounds accesses in BERT-related core (Ross
     Lagerwall)

   - Fix the APEI code parsing HEST that includes a Deferred Machine
     Check subtable (Yazen Ghannam)

   - Use DEFINE_DEBUGFS_ATTRIBUTE for APEI-related debugfs files
     (YueHaibing)

   - Switch the APEI ERST code to the new generic UUID API (Andy
     Shevchenko)

   - Update the MAINTAINERS entry for APEI (Borislav Petkov)

   - Fix and clean up the ACPI EC driver (Rafael Wysocki, Zhang Rui)

   - Fix DMI checks handling in the ACPI backlight driver and add the
     "Lunch Box" chassis-type check to it (Hans de Goede)

   - Add support for using ACPI table overrides included in built-in
     initrd images (Shunyong Yang)

   - Update ACPI device enumeration to treat the PWM2 device as "always
     present" on Lenovo Yoga Book (Yauhen Kharuzhy)

   - Fix up the enumeration of device objects with the PRP0001 device ID
     (Andy Shevchenko)

   - Clean up PPTT parsing error messages (John Garry)

   - Clean up debugfs files creation handling (Greg Kroah-Hartman,
     Rafael Wysocki)

   - Clean up the ACPI DPTF Makefile (Masahiro Yamada)"

* tag 'acpi-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  ACPI / bus: Respect PRP0001 when retrieving device match data
  ACPICA: Update version to 20190215
  ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
  ACPICA: ACPI 6.3: add GTDT Revision 3 support
  ACPICA: ACPI 6.3: HMAT updates
  ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
  ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
  ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
  ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
  efi: cper: Fix possible out-of-bounds access
  ACPI: APEI: Fix possible out-of-bounds access to BERT region
  ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
  ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
  ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
  ACPICA: Update/clarify messages for control method failures
  ACPICA: Debugger: Fix possible fault with the "test objects" command
  ACPICA: Interpreter: Emit warning for creation of a zero-length op region
  ACPICA: Remove legacy module-level code support
  ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
  ACPI / video: Extend chassis-type detection with a "Lunch Box" check
  ..
2019-03-06 13:33:11 -08:00
Rafael J. Wysocki
6a558c723e Merge branch 'pm-cpufreq'
* pm-cpufreq: (48 commits)
  cpufreq: kryo: Release OPP tables on module removal
  cpufreq: ap806: add missing of_node_put after of_device_is_available
  cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
  cpufreq: Pass updated policy to driver ->setpolicy() callback
  cpufreq: Fix two debug messages in cpufreq_set_policy()
  cpufreq: Reorder and simplify cpufreq_update_policy()
  cpufreq: Add kerneldoc comments for two core functions
  cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
  cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
  cpufreq: intel_pstate: Avoid redundant initialization of local vars
  cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
  ACPI / CPPC: Add a helper to get desired performance
  cpufreq: davinci: move configuration to include/linux/platform_data
  cpufreq: speedstep: convert BUG() to BUG_ON()
  cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
  cpufreq: longhaul: remove unneeded semicolon
  cpufreq: pcc-cpufreq: remove unneeded semicolon
  cpufreq: Replace double NOT (!!) with single NOT (!)
  cpufreq: intel_pstate: Add reasons for failure and debug messages
  cpufreq: dt: Implement online/offline() callbacks
  ...
2019-03-04 11:18:54 +01:00
Rafael J. Wysocki
08a2e45ac0 Merge branches 'pm-cpuidle' and 'powercap'
* pm-cpuidle:
  ACPI / processor: Set P_LVL{2,3} idle state descriptions
  intel_idle: add support for Jacobsville
  cpuidle: dt: bail out if the idle-state DT node is not compatible
  cpuidle: use BIT() for idle state flags and remove CPUIDLE_DRIVER_FLAGS_MASK
  Documentation: driver-api: PM: Add cpuidle document
  cpuidle: New timer events oriented governor for tickless systems

* powercap:
  powercap/intel_rapl: add Ice Lake mobile
  powercap: intel_rapl: add support for Jacobsville
2019-03-04 11:18:42 +01:00
Rafael J. Wysocki
8167e00e9e Merge branches 'acpi-video' and 'acpi-x86'
* acpi-video:
  ACPI / video: Extend chassis-type detection with a "Lunch Box" check
  ACPI / video: Refactor and fix dmi_is_desktop()

* acpi-x86:
  ACPI / x86: Make PWM2 device always present at Lenovo Yoga Book
2019-03-04 11:17:28 +01:00
Rafael J. Wysocki
dcaed592b2 Merge branch 'acpi-apei'
* acpi-apei: (29 commits)
  efi: cper: Fix possible out-of-bounds access
  ACPI: APEI: Fix possible out-of-bounds access to BERT region
  MAINTAINERS: Add James Morse to the list of APEI reviewers
  ACPI / APEI: Add support for the SDEI GHES Notification type
  firmware: arm_sdei: Add ACPI GHES registration helper
  ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications
  ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry()
  ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length
  ACPI / APEI: Make GHES estatus header validation more user friendly
  ACPI / APEI: Pass ghes and estatus separately to avoid a later copy
  ACPI / APEI: Let the notification helper specify the fixmap slot
  ACPI / APEI: Move locking to the notification helper
  arm64: KVM/mm: Move SEA handling behind a single 'claim' interface
  KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing
  ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue
  ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI
  ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors
  ACPI / APEI: Generalise the estatus queue's notify code
  ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
  ACPI / APEI: Remove spurious GHES_TO_CLEAR check
  ...
2019-03-04 11:16:35 +01:00
Rafael J. Wysocki
511514f1d9 Merge branches 'acpi-tables', 'acpi-debug', 'acpi-ec' and 'acpi-dptf'
* acpi-tables:
  ACPI/PPTT: Add acpi_pptt_warn_missing() to consolidate logs
  ACPI / tables: table override from built-in initrd

* acpi-debug:
  ACPI: debug: Clean up acpi_aml_init()
  ACPI: no need to check return value of debugfs_create functions

* acpi-ec:
  Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"
  ACPI: EC: Simplify boot EC checks in acpi_ec_add()
  ACPI: EC: Eliminate acpi_config_boot_ec()
  ACPI: EC: Make acpi_ec_dsdt_probe() more straightforward
  ACPI: EC: Make acpi_ec_ecdt_probe() more straightforward
  ACPI: EC: Declare boot_ec as static
  ACPI: EC: Clean up probing for early EC

* acpi-dptf:
  ACPI / DPTF: remove header search path to the parent directory
2019-03-04 11:16:04 +01:00
Rafael J. Wysocki
7db52b5ace Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20190215
  ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
  ACPICA: ACPI 6.3: add GTDT Revision 3 support
  ACPICA: ACPI 6.3: HMAT updates
  ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
  ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
  ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
  ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
  ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
  ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
  ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
  ACPICA: Update/clarify messages for control method failures
  ACPICA: Debugger: Fix possible fault with the "test objects" command
  ACPICA: Interpreter: Emit warning for creation of a zero-length op region
  ACPICA: Remove legacy module-level code support
  ACPICA: Get rid of acpi_sleep_dispatch()
  ACPICA: Update version to 20190108
  ACPICA: All acpica: Update copyrights to 2019
  ACPICA: acpiexec: Add option to dump extra info for memory leaks
  ACPICA: Convert more ACPI errors to firmware errors
2019-03-04 11:15:30 +01:00
Toshi Kani
5c9d62d002 acpi/nfit: Update NFIT flags error message
ACPI NFIT flags field reports major errors on NVDIMM, which need
user's attention.

Update the current log to a proper error message with dev_err().
The current message string is kept for grep-compatibility.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-01 09:44:59 -08:00
Andy Shevchenko
886ca88be6 ACPI / bus: Respect PRP0001 when retrieving device match data
In the PRP0001 case, the compatible string may have additional data
affiliated with the device.  When we call device_get_match_data() on
such device, we will get nothing since currently
acpi_device_get_match_data() doesn't respect PRP0001.

To fix the above, try acpi_of_match_device() if there is no ACPI
table in the driver.

Anyway, note that the device is expected to get its own proper
ACPI ID.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-27 10:47:59 +01:00
Rafael J. Wysocki
17162a117c Merge back earlier cpufreq material for v5.1. 2019-02-24 21:18:05 +01:00
Erik Schmauss
c163f90cc8 ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:12:01 +01:00
Erik Schmauss
ddcfd66c1d ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
ACPICA commit 205ac8fc721073f1e609df963b14ef2237aeba73

Link: https://github.com/acpica/acpica/commit/205ac8fc
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:11:59 +01:00
Erik Schmauss
aa6ec56b57 ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
ACPICA commit a4849944e80f97970e99843f4975850753584a4e

This change adds PCC operation region support in the AML interpreter
and a default handler for acpiexec. According to the specification,
the PCC operation region performs a transaction when the COMD field
is written. This allows ASL to write data to other fields before
sending the data.

In order to accommodate this protocol, a temorary buffer is added
to the regionfield object to accumulate writes. If any offset that
spans COMD is written, the temporary buffer is sent to the PCC
operation region handler to be processed.

This change also renames the PCC keyword to platform_comm_channel.

Link: https://github.com/acpica/acpica/commit/a4849944
Reviewed-by: Kyle Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-24 21:11:20 +01:00
Andy Shevchenko
a9443a6328 clk: x86: Move clk-lpss.h to platform_data/x86
clk-lpss.h is solely x86 related header. Move it to correct folder.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 00:14:31 -08:00
Dan Williams
78153dd45e nfit/ars: Avoid stale ARS results
Gate ARS result consumption on whether the OS issued start-ARS since the
previous consumption. The BIOS may only clear its result buffers after a
successful start-ARS.

Fixes: 0caeef63e6 ("libnvdimm: Add a poison list and export badblocks")
Cc: <stable@vger.kernel.org>
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20 14:18:59 -08:00
Dan Williams
5479b2757f nfit/ars: Allow root to busy-poll the ARS state machine
The ARS implementation implements exponential back-off on the poll
interval to prevent high-frequency access to the DIMM / platform
interface. Depending on when the ARS completes the poll interval may
exceed the completion event by minutes. Allow root to reset the timeout
each time it probes the status. A one-second timeout is still enforced,
but root can otherwise can control the poll interval.

Fixes: bc6ba80858 ("nfit, address-range-scrub: rework and simplify ARS...")
Cc: <stable@vger.kernel.org>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20 14:18:59 -08:00
Dan Williams
e34b8252a3 nfit/ars: Introduce scrub_flags
In preparation for introducing new flags to gate whether ARS results are
stale, or poll the completion state, convert the existing flags to an
unsigned long with enumerated values. This conversion allows the flags
to be atomically updated outside of ->init_mutex.

Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20 14:18:59 -08:00
Dan Williams
317a992ab9 nfit/ars: Remove ars_start_flags
The ars_start_flags property of 'struct acpi_nfit_desc' is no longer
used since ARS_REQ_SHORT and ARS_REQ_LONG were added.

Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20 14:18:59 -08:00
Dan Williams
fa3ed4d981 nfit/ars: Attempt short-ARS even in the no_init_ars case
The no_init_ars option is meant to prevent long-ARS, but short-ARS
should be allowed to grab any immediate results.

Fixes: bc6ba80858 ("nfit, address-range-scrub: rework and simplify ARS...")
Cc: <stable@vger.kernel.org>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-02-20 14:18:59 -08:00
Ross Lagerwall
1c0d9b1c31 ACPI: APEI: Fix possible out-of-bounds access to BERT region
Check that the length recorded in the generic error status block is
within the region before checking the contents of the region itself.

Otherwise it may result in an out-of-bounds access if the system
firmware has generated a status block with an invalid length (larger
than the mapped region). Also move the block_status check so that it
only happens after the block has been verified to be within the mapped
region.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-20 10:34:03 +01:00
Yazen Ghannam
34a62cd0df ACPI / processor: Set P_LVL{2,3} idle state descriptions
The ACPI idle driver will fallback to using the legacy P_LVL* SystemIO
method of entering C-states if the _CST method is disabled and P_BLK is
defined. However, in this case the C2 and C3 states won't have a
description set, so the user will see "<null>" when reading the
description from sysfs.

Give each of these states a description.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:29:13 +01:00
Xiongfeng Wang
1757d05f31 ACPI / CPPC: Add a helper to get desired performance
This patch add a helper to get the value of desired performance
register.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ rjw: More white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:27:42 +01:00