Commit Graph

88 Commits

Author SHA1 Message Date
Nicolas Saenz Julienne
a7ba70f178 dma-mapping: treat dev->bus_dma_mask as a DMA limit
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.

With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.

In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-21 18:14:35 +01:00
Lorenzo Pieralisi
3e77eeb7a2 ACPI/IORT: Rename arm_smmu_v3_set_proximity() 'node' local variable
Commit 36a2ba0775 ("ACPI/IORT: Reject platform device creation on NUMA
node mapping failure") introduced a local variable 'node' in
arm_smmu_v3_set_proximity() that shadows the struct acpi_iort_node
pointer function parameter.

Execution was unaffected but it is prone to errors and can lead
to subtle bugs.

Rename the local variable to prevent any issue.

Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-05 11:06:34 +01:00
Lorenzo Pieralisi
5a46d3f71d ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.

Update the comparison condition and clarify the resulting error
message.

Fixes: 4bf2efd26d ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-07-23 15:45:46 +01:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner
2025cf9e19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Linus Torvalds
0a72ef8990 Second round of arm64 fixes for -rc2
- Fix incorrect LDADD instruction encoding in our disassembly macros
 
 - Disable the broken ARM64_PSEUDO_NMI support for now
 
 - Add workaround for Cortex-A76 CPU erratum #1463225
 
 - Handle Cortex-A76/Neoverse-N1 erratum #1418040 w/ existing workaround
 
 - Fix IORT build failure if IOMMU_SUPPORT=n
 
 - Fix place-relative module relocation range checking and its
   interaction with KASLR
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzoC8MACgkQt6xw3ITB
 YzQfiAf+MXFzrAd3o7v40CnZu6ELw+ldedPh34oBjD7h6we3hroxi5Fss2nbwH0o
 BmAm4Nv1/Njk5+hA7Mlp3/mRn0vcd3NDP+FyH3inLjUU7owc41thp0SKlCOfFdZk
 K8sVCOeCWt7GEEPcnFsPO0nU+7f3ZKDDNBo0L+qJPxrMOTDcbQ3cIjW/ua7vQRHv
 pIDGF+iJAhHeNoc1Wjq08F8Q+Dq7dYvhtokeyDivSn4NulmRvdL+z581gMmj7ExT
 ARB6WtHGoOo+8UdjBJIDnXRKhJLfGexQaoAojk+IogaV0ACDtz6CuqsSIh1e5SFC
 oPqRSP5ITTbXEDS5uaUW1pYlwmGTaw==
 =ynUz
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull more arm64 fixes from Will Deacon:

 - Fix incorrect LDADD instruction encoding in our disassembly macros

 - Disable the broken ARM64_PSEUDO_NMI support for now

 - Add workaround for Cortex-A76 CPU erratum #1463225

 - Handle Cortex-A76/Neoverse-N1 erratum #1418040 w/ existing workaround

 - Fix IORT build failure if IOMMU_SUPPORT=n

 - Fix place-relative module relocation range checking and its
   interaction with KASLR

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: insn: Add BUILD_BUG_ON() for invalid masks
  arm64: insn: Fix ldadd instruction encoding
  arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now
  arm64: Handle erratum 1418040 as a superset of erratum 1188873
  arm64/module: deal with ambiguity in PRELxx relocation ranges
  ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
  arm64/kernel: kaslr: reduce module randomization range to 2 GB
  arm64: errata: Add workaround for Cortex-A76 erratum #1463225
  arm64: Remove useless message during oops
2019-05-24 11:03:26 -07:00
Lorenzo Pieralisi
8212688600 ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
If IOMMU_SUPPORT is not enabled (and therefore IOMMU_API is not
selected), struct iommu_fwspec is an empty struct and
IOMMU_FWSPEC_PCI_RC_ATS is not defined, resulting in the following
compilation errors:

drivers/acpi/arm64/iort.c: In function iort_iommu_configure:
drivers/acpi/arm64/iort.c:1079:21: error: struct iommu_fwspec has no member named flag:
    dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
                     ^~
drivers/acpi/arm64/iort.c:1079:32: error: IOMMU_FWSPEC_PCI_RC_ATS
undeclared (first use in this function)
    dev->iommu_fwspec->flags |= IOMMU_FWSPEC_PCI_RC_ATS;
                                ^~~~~~~~~~~~~~~~~~~~~~~
drivers/acpi/arm64/iort.c:1079:32: note: each undeclared identifier is reported only once for each function it appears in

Move iort_iommu_configure() (and the helpers functions it relies on)
into CONFIG_IOMMU_API preprocessor guarded code so that when
CONFIG_IOMMU_SUPPORT is not enabled we prevent compiling code that is
basically equivalent to no-OP, fixing the build errors.

Cc: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190515034253.79348-1-wangkefeng.wang@huawei.com/
Fixes: 5702ee2418 ("ACPI/IORT: Check ATS capability in root complex nodes")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-23 11:38:11 +01:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds
a13f065550 IOMMU Updates for Linux v5.2
Including:
 
 	- ATS support for ARM-SMMU-v3.
 
 	- AUX domain support in the IOMMU-API and the Intel VT-d driver.
 	  This adds support for multiple DMA address spaces per
 	  (PCI-)device. The use-case is to multiplex devices between
 	  host and KVM guests in a more flexible way than supported by
 	  SR-IOV.
 
 	- The Rest are smaller cleanups and fixes, two of which needed
 	  to be reverted after testing in linux-next.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlzZWPkACgkQK/BELZcB
 GuPdRRAAj/RcgVn7fqmNDM02xe6C5PuwBGYkXnC+atDrTQWbFsM0JE3YTWEHJ+66
 7RMoYaksRaSBsn3QuX3b6+g6E+exhGoQ0BfkmuF8StUXAsaxvzGxvuk+cP0o4/mK
 pZkj3BddS4ycRqQPsVEbgJGRzL39dxWHe7p3/FfwgV+HzVonURFozU0HixLAoBhr
 uS0LpBiG8uGCMvO6yhTmPmfrbsSAcMivb7LlmsaykXPhjBk7kSqNgHNNx5O+HC8m
 XJdFatkxolkrN6A2FoHdP05sAXCv+uHbAGGGitYziRaXG7GBzm7Vc2LspJIml+y2
 898+MiTH1M3P0WPyDa3cfcnRc2BBuJg56emad4CcfduM9sVXI0Ol6slNAYljnSYD
 5A0CUxbrLxGUZaf6DAUJ9w5L+LhgEkXzKWEE9Nif46K4I1CFSt/d8nwB6Q5Oc/ie
 GZwTICRkMwTeqOM/CTyvwJCCwZm47AVv3qwaI0z5oDplH/bbRmNEi5WFJsgcgOnd
 GS5kmzjFBsljjDVWswgugdm7sdMSl7y88uQK9zUiG8fXgRiVUW/rENfZ1SMmVl1p
 zBQDndZmtrHm5ybe/NAZ8vaJhk4i1F3rWT0hwRZZKGDIrd/C3egnNyYkc4XeTPGe
 3il+dJleIIwOX5Fpa44XTV1rDuVOXpF5LS5NRLjhhd+XqbaXZFI=
 =HLtu
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - ATS support for ARM-SMMU-v3.

 - AUX domain support in the IOMMU-API and the Intel VT-d driver. This
   adds support for multiple DMA address spaces per (PCI-)device. The
   use-case is to multiplex devices between host and KVM guests in a
   more flexible way than supported by SR-IOV.

 - the rest are smaller cleanups and fixes, two of which needed to be
   reverted after testing in linux-next.

* tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits)
  Revert "iommu/amd: Flush not present cache in iommu_map_page"
  Revert "iommu/amd: Remove the leftover of bypass support"
  iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path
  iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
  iommu/vt-d: Set intel_iommu_gfx_mapped correctly
  iommu/amd: Flush not present cache in iommu_map_page
  iommu/vt-d: Cleanup: no spaces at the start of a line
  iommu/vt-d: Don't request page request irq under dmar_global_lock
  iommu/vt-d: Use struct_size() helper
  iommu/mediatek: Fix leaked of_node references
  iommu/amd: Remove amd_iommu_pd_list
  iommu/arm-smmu: Log CBFRSYNRA register on context fault
  iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
  iommu/arm-smmu-v3: Disable tagged pointers
  iommu/arm-smmu-v3: Add support for PCI ATS
  iommu/arm-smmu-v3: Link domains and devices
  iommu/arm-smmu-v3: Add a master->domain pointer
  iommu/arm-smmu-v3: Store SteamIDs in master
  iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master
  ACPI/IORT: Check ATS capability in root complex nodes
  ...
2019-05-13 09:23:18 -04:00
Will Deacon
b33f908811 Merge branch 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into for-next/core 2019-05-03 10:18:08 +01:00
Jean-Philippe Brucker
5702ee2418 ACPI/IORT: Check ATS capability in root complex nodes
Root complex node in IORT has a bit telling whether it supports ATS or
not. Store this bit in the IOMMU fwspec when setting up a device, so it
can be accessed later by an IOMMU driver. In the future we'll probably
want to store this bit at the host bridge or SMMU rather than in each
endpoint.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-23 12:23:03 +01:00
Kefeng Wang
36a2ba0775 ACPI/IORT: Reject platform device creation on NUMA node mapping failure
In a system where, through IORT firmware mappings, the SMMU device is
mapped to a NUMA node that is not online, the kernel bootstrap results
in the following crash:

  Unable to handle kernel paging request at virtual address 0000000000001388
  Mem abort info:
    ESR = 0x96000004
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000001388] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] SMP
  Modules linked in:
  CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15
  pstate: 80c00009 (Nzcv daif +PAN +UAO)
  pc : __alloc_pages_nodemask+0x13c/0x1068
  lr : __alloc_pages_nodemask+0xdc/0x1068
  ...
  Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
  Call trace:
   __alloc_pages_nodemask+0x13c/0x1068
   new_slab+0xec/0x570
   ___slab_alloc+0x3e0/0x4f8
   __slab_alloc+0x60/0x80
   __kmalloc_node_track_caller+0x10c/0x478
   devm_kmalloc+0x44/0xb0
   pinctrl_bind_pins+0x4c/0x188
   really_probe+0x78/0x2b8
   driver_probe_device+0x64/0x110
   device_driver_attach+0x74/0x98
   __driver_attach+0x9c/0xe8
   bus_for_each_dev+0x84/0xd8
   driver_attach+0x30/0x40
   bus_add_driver+0x170/0x218
   driver_register+0x64/0x118
   __platform_driver_register+0x54/0x60
   arm_smmu_driver_init+0x24/0x2c
   do_one_initcall+0xbc/0x328
   kernel_init_freeable+0x304/0x3ac
   kernel_init+0x18/0x110
   ret_from_fork+0x10/0x1c
  Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804)
  ---[ end trace dfeaed4c373a32da ]--

Change the dev_set_proximity() hook prototype so that it returns a
value and make it return failure if the PXM->NUMA-node mapping
corresponds to an offline node, fixing the crash.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-16 18:16:24 +01:00
Shameer Kolothum
24062fe858 perf/smmuv3: Enable HiSilicon Erratum 162001800 quirk
HiSilicon erratum 162001800 describes the limitation of
SMMUv3 PMCG implementation on HiSilicon Hip08 platforms.

On these platforms, the PMCG event counter registers
(SMMU_PMCG_EVCNTRn) are read only and as a result it
is not possible to set the initial counter period value
on event monitor start.

To work around this, the current value of the counter
is read and used for delta calculations. OEM information
from ACPI header is used to identify the affected hardware
platforms.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[will: update silicon-errata.txt and add reason string to acpi match]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04 16:49:22 +01:00
Neil Leeder
24e5160493 ACPI/IORT: Add support for PMCG
Add support for the SMMU Performance Monitor Counter Group
information from ACPI. This is in preparation for its use
in the SMMUv3 PMU driver.

Signed-off-by: Neil Leeder <nleeder@codeaurora.org>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04 13:44:05 +01:00
Jean-Philippe Brucker
c7777236dd ACPI/IORT: Fix rc_dma_get_range()
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback()
expects the opaque pointer argument to be a PCI bus device. At the
moment rc_dma_get_range() passes the PCI endpoint instead of the bus,
and we've been lucky to have pci_domain_nr(ptr) return 0 instead of
crashing. Pass the bus device to iort_scan_node().

Fixes: 5ac65e8c89 ("ACPI/IORT: Support address size limit for root complexes")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-11 10:02:59 +00:00
Qian Cai
6b68835b5a ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
Commit 8097e53eab ("ACPI/IORT: Use helper functions to access
dev->iommu_fwspec") changed by mistake the iort_fwspec_iommu_ops() stub
definition (compiled in when CONFIG_IOMMU_API=n), that caused the
following compilation failure:

drivers/acpi/arm64/iort.c:880:1: error: expected identifier or
'(' before '{' token
 { return NULL; }
 ^
drivers/acpi/arm64/iort.c:879:39: warning: 'iort_fwspec_iommu_ops'
used but never defined
 static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev);
                                       ^~~~~~~~~~~~~~~~~~~~~

Fix it.

Fixes: 8097e53eab ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec")
Signed-off-by: Qian Cai <cai@lca.pw>
[lorenzo.pieralisi@arm.com: updated tags and log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-07 17:15:40 +00:00
Linus Torvalds
8e143b90e4 IOMMU Updates for Linux v4.21
Including (in no particular order):
 
 	- Page table code for AMD IOMMU now supports large pages where
 	  smaller page-sizes were mapped before. VFIO had to work around
 	  that in the past and I included a patch to remove it (acked by
 	  Alex Williamson)
 
 	- Patches to unmodularize a couple of IOMMU drivers that would
 	  never work as modules anyway.
 
 	- Work to unify the the iommu-related pointers in
 	  'struct device' into one pointer. This work is not finished
 	  yet, but will probably be in the next cycle.
 
 	- NUMA aware allocation in iommu-dma code
 
 	- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
 
 	- Scalable mode support for the Intel VT-d driver
 
 	- PM runtime improvements for the ARM-SMMU driver
 
 	- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
 
 	- Various smaller fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJcKkEoAAoJECvwRC2XARrjCCoQAJxsgaAF5Z0s7z8j2A9SkaGp
 SIMnUAI5mDOdyhTOAI+eehpRzg5UVYt/JjFYnHz8HWqbSc8YOvDvHafmhMFIwYvO
 hq5knbs6ns2jJNFO+M4dioDq+3THdqkGIF5xoHdGTP7cn9+XyQ8lAoHo0RuL122U
 PJGqX7Cp4XnFP4HMb3uQYhVeBV7mU+XqAdB+4aDnQkzI5LkQCRr74GcqOm+Rlnyc
 cmQWc2arUMjgc1TJIrex8dx9dT6lq8kOmhyEg/IjHeGaZyJ3HqA+30XDDLEExN0G
 MeVawuxJz40HgXlkXr+iZTQtIFYkXdKvJH6rptMbOfbDeDz+YZ01TbtAMMH9o4jX
 yxjjMjdcWTsWYQ/MHHdsoMP34cajCi/EYPMNksbycw+E3Y+X/bSReCoWC0HUK8/+
 Z4TpZ9mZVygtJR+QNZ+pE9oiJpb4sroM10zTnbMoVHNnvfsO01FYk7FMPkolSKLw
 zB4MDswQYgchoFR9Z4ZB4PycYTzeafLKYgDPDoD1vIJgDavuidwvDWDRTDc+aMWM
 siIIewq19To9jDJkVjX4dsT/p99KVKgAR/Ps6jjWkAroha7g6GcmlYZHIJnyop04
 jiaSXUsk8aRucP/CRz5xdMmaGoN7BsNmpUjcrquc6Povk/6gvXvpY04oCs1+gNMX
 ipL9E3GTFCVBubRFrksv
 =DT9A
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Page table code for AMD IOMMU now supports large pages where smaller
   page-sizes were mapped before. VFIO had to work around that in the
   past and I included a patch to remove it (acked by Alex Williamson)

 - Patches to unmodularize a couple of IOMMU drivers that would never
   work as modules anyway.

 - Work to unify the the iommu-related pointers in 'struct device' into
   one pointer. This work is not finished yet, but will probably be in
   the next cycle.

 - NUMA aware allocation in iommu-dma code

 - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver

 - Scalable mode support for the Intel VT-d driver

 - PM runtime improvements for the ARM-SMMU driver

 - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom

 - Various smaller fixes and improvements

* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
  iommu: Check for iommu_ops == NULL in iommu_probe_device()
  ACPI/IORT: Don't call iommu_ops->add_device directly
  iommu/of: Don't call iommu_ops->add_device directly
  iommu: Consolitate ->add/remove_device() calls
  iommu/sysfs: Rename iommu_release_device()
  dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
  xhci: Use device_iommu_mapped()
  powerpc/iommu: Use device_iommu_mapped()
  ACPI/IORT: Use device_iommu_mapped()
  iommu/of: Use device_iommu_mapped()
  driver core: Introduce device_iommu_mapped() function
  iommu/tegra: Use helper functions to access dev->iommu_fwspec
  iommu/qcom: Use helper functions to access dev->iommu_fwspec
  iommu/of: Use helper functions to access dev->iommu_fwspec
  iommu/mediatek: Use helper functions to access dev->iommu_fwspec
  iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
  iommu/dma: Use helper functions to access dev->iommu_fwspec
  iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
  ACPI/IORT: Use helper functions to access dev->iommu_fwspec
  iommu: Introduce wrappers around dev->iommu_fwspec
  ...
2019-01-01 15:55:29 -08:00
Sinan Kaya
43554cebba ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
Remove PCI dependent code out of iort.c when CONFIG_PCI is not defined.
A quick search reveals the following functions:
1. pci_request_acs()
2. pci_domain_nr()
3. pci_is_root_bus()
4. to_pci_dev()

Both pci_domain_nr() and pci_is_root_bus() are defined in linux/pci.h.
pci_domain_nr() is a stub function when CONFIG_PCI is not set and
pci_is_root_bus() just returns a reference to a structure member which
is still valid without CONFIG_PCI set.

to_pci_dev() is a macro that expands to container_of.

pci_request_acs() is the only code that gets pulled in from drivers/pci/*.c

Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-20 10:19:49 +01:00
Joerg Roedel
03ebe48e23 Merge branches 'iommu/fixes', 'arm/renesas', 'arm/mediatek', 'arm/tegra', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next 2018-12-20 10:05:20 +01:00
Joerg Roedel
d2e1a003af ACPI/IORT: Don't call iommu_ops->add_device directly
Make sure to invoke this call-back through the proper
function of the IOMMU-API.

Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-17 12:47:51 +01:00
Joerg Roedel
13e6a84d69 ACPI/IORT: Use device_iommu_mapped()
Replace the iommu-check with a proper and readable function
call.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-17 10:38:43 +01:00
Joerg Roedel
8097e53eab ACPI/IORT: Use helper functions to access dev->iommu_fwspec
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.

Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-17 10:38:30 +01:00
Lorenzo Pieralisi
ea2412dc21 ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value
Running the Clang static analyzer on IORT code detected the following
error:

Logic error: Branch condition evaluates to a garbage value

in

iort_get_platform_device_domain()

If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.

Initialize the msi_parent pointer, fixing the bug.

Fixes: d4f54a1866 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-30 17:28:39 +00:00
Christoph Hellwig
dc3c05504d dma-mapping: remove dma_deconfigure
This goes through a lot of hooks just to call arch_teardown_dma_ops.
Replace it with a direct call instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-08 11:19:28 +02:00
Robin Murphy
6757cdae44 ACPI/IORT: Don't set default coherent DMA mask
Now that we can track upstream DMA constraints properly with
bus_dma_mask instead of trying (and failing) to maintain it in
coherent_dma_mask, it doesn't make much sense for the firmware code to
be touching the latter at all. It's merely papering over bugs wherein a
driver has failed to call dma_set_coherent_mask() *and* the bus code has
not initialised any default value.

We don't really want to encourage more drivers coercing dma_mask so
we'll continue to fix that up if necessary, but add a warning to help
flush out any such buggy bus code that remains.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27 19:01:06 +02:00
Robin Murphy
d74ea7100b ACPI/IORT: Set bus DMA mask as appropriate
When an explicit DMA limit is described by firmware, we need to remember
it regardless of how drivers might subsequently update their devices'
masks. The new bus_dma_mask field does that.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27 19:01:05 +02:00
Robin Murphy
5ac65e8c89 ACPI/IORT: Support address size limit for root complexes
IORT revision D allows PCI root complex nodes to specify a memory
address size limit equivalently to named components, to help describe
straightforward integrations which don't really warrant a full-blown
_DMA method. Now that our headers are up-to-date, plumb it in.

If both _DMA and an address size limit are present, we would always
expect the former to be a more specific subset of the latter (since it
makes little sense for a _DMA range to involve bits which IORT says
aren't wired up), thus we can save calculating an explicit intersection
of the two effective masks and simply use short-circuit logic instead.

Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-07-27 19:01:04 +02:00
Linus Torvalds
e5c372280b IOMMU Updates for Linux v4.17
These updates come with:
 
 	- OF_IOMMU support for the Rockchip iommu driver so that it can
 	  use generic DT bindings
 
 	- Rework of locking in the AMD IOMMU interrupt remapping code to
 	  make it work better in RT kernels
 
 	- Support for improved iotlb flushing in the AMD IOMMU driver
 
 	- Support for 52-bit physical and virtual addressing in the
 	  ARM-SMMU
 
 	- Various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJazi2BAAoJECvwRC2XARrjYVwP/AyXK7CjRvaiHFopIUO0WpwY
 V3GiKrODtSNHqPSKuFnqIssIhxZPw/SKFz6E/pe08pZ/pxHYTxeTL78Wz7D1+4Sp
 n0YokSM5qLb660OTQVnyKNCku8cEMCb9hkQ/75SFgwcILQYF93cZBDIdBn93OKVO
 6xAOE+tqd8Daulnk0YpdiCTFTJPzYHPl6B7scoUav26uaKxWeMJxeYe+EXC+4WQG
 U1u/jDiVXyllzGgRqqfrmO4L2acmsK8HL97hD4+m1URJKDlb8ho6xwaRThFZWqXS
 SbrYnvH0ruWGrLiQKmVUssw8FqbcXCzq3236g2O8jE4jqWSm70twg+q31iMjwD7v
 bwsJGMkk7aLrquv9Zpaylpf8tRECk5bjhTFC2zB0pdum5XLx47j0IHKWMLPYhkCz
 E0pBefvuhoSTbt/5X0urSRzH2Hk4ljEsM+QjlfH8SN3ALTljFjay607wbxC7t35M
 LEL5AuNsDDBddoJIi9D13CdJEZa4lps8dbpB8m40lQVvmiLPLcKraaG0RfKQ397T
 wsxhsDOQYM2FCwfUP3n8RTsMKRIp/UVkKY+2G7AsKofciSeulK6nDbrV7jFnitx4
 vTxbRgpNejJpqzKZG/W9lCGWk1BhmQK/Cbu6JW5IA4+ew9omWkFp61U6rtc645Te
 6cNEYBiMz/RZIiC2b18J
 =kte5
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - OF_IOMMU support for the Rockchip iommu driver so that it can use
   generic DT bindings

 - rework of locking in the AMD IOMMU interrupt remapping code to make
   it work better in RT kernels

 - support for improved iotlb flushing in the AMD IOMMU driver

 - support for 52-bit physical and virtual addressing in the ARM-SMMU

 - various other small fixes and cleanups

* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
  iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
  iommu/rockchip: Support sharing IOMMU between masters
  iommu/rockchip: Add runtime PM support
  iommu/rockchip: Fix error handling in init
  iommu/rockchip: Use OF_IOMMU to attach devices automatically
  iommu/rockchip: Use IOMMU device for dma mapping operations
  dt-bindings: iommu/rockchip: Add clock property
  iommu/rockchip: Control clocks needed to access the IOMMU
  iommu/rockchip: Fix TLB flush of secondary IOMMUs
  iommu/rockchip: Use iopoll helpers to wait for hardware
  iommu/rockchip: Fix error handling in attach
  iommu/rockchip: Request irqs in rk_iommu_probe()
  iommu/rockchip: Fix error handling in probe
  iommu/rockchip: Prohibit unbind and remove
  iommu/amd: Return proper error code in irq_remapping_alloc()
  iommu/amd: Make amd_iommu_devtable_lock a spin_lock
  iommu/amd: Drop the lock while allocating new irq remap table
  iommu/amd: Factor out setting the remap table for a devid
  iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
  iommu/amd: Remove the special case from alloc_irq_table()
  ...
2018-04-11 18:50:41 -07:00
Lorenzo Pieralisi
8dc12538dd ACPI/IORT: Remove obsolete ACPI_IORT_SMMU_V3_CAVIUM_CN99XX define
To defeat ACPICA<->kernel merge order dependencies a preprocessor define
value was introduced in the IORT compilation unit according to IORT
revision C, IORT_SMMU_V3_CAVIUM_CN99XX, so that even if the value was
not defined in ACPICA headers the IORT kernel layer would still be able
to function and use it.

Since commit 0c2021c047 ("ACPICA: IORT: Update SMMU models for
revision C") finally added the define in ACPICA headers, as required by
ACPICA IORT support, the preprocessor definition in the IORT kernel
compilation unit has become obsolete and can be removed.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
2018-03-08 11:22:30 +00:00
Lorenzo Pieralisi
6c47506361 ACPI/IORT: Remove temporary iort_get_id_mapping_index() ACPICA guard
In IORT issue C SMMUv3 IORT nodes gained an additional field (DeviceID
mapping index) so that the SMMUv3 can describe its MSI interrupts.

Referring to it in the kernel requires ACPICA changes and in order
to prevent kernel<->ACPICA dependencies kernel code depending on the
SMMUv3 DeviceID mapping index field was guarded with an ACPICA version
conditional.

ACPICA changes introducing DeviceID mapping index in the IORT structs
were integrated in the kernel with:

commit 4c106aa411 ("ACPICA: iasl: Add SMMUv3 device ID mapping index
support")

so the temporary ACPICA guard has become stale and can be removed.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
2018-03-08 11:22:30 +00:00
Shameer Kolothum
8b4282e6b8 ACPI/IORT: Add msi address regions reservation helper
On some platforms msi parent address regions have to be excluded from
normal IOVA allocation in that they are detected and decoded in a HW
specific way by system components and so they cannot be considered normal
IOVA address space.

Add a helper function that retrieves ITS address regions - the msi
parent - through IORT device <-> ITS mappings and reserves it so that
these regions will not be translated by IOMMU and will be excluded from
IOVA allocations. The function checks for the smmu model number and
only applies the msi reservation if the platform requires it.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[For the ITS part]
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-02-14 15:15:41 +01:00
Linus Torvalds
c9b012e5f4 arm64 updates for 4.15
Plenty of acronym soup here:
 
 - Initial support for the Scalable Vector Extension (SVE)
 - Improved handling for SError interrupts (required to handle RAS events)
 - Enable GCC support for 128-bit integer types
 - Remove kernel text addresses from backtraces and register dumps
 - Use of WFE to implement long delay()s
 - ACPI IORT updates from Lorenzo Pieralisi
 - Perf PMU driver for the Statistical Profiling Extension (SPE)
 - Perf PMU driver for Hisilicon's system PMUs
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJaCcLqAAoJELescNyEwWM0JREH/2FbmD/khGzEtP8LW+o9D8iV
 TBM02uWQxS1bbO1pV2vb+512YQO+iWfeQwJH9Jv2FZcrMvFv7uGRnYgAnJuXNGrl
 W+LL6OhN22A24LSawC437RU3Xe7GqrtONIY/yLeJBPablfcDGzPK1eHRA0pUzcyX
 VlyDruSHWX44VGBPV6JRd3x0vxpV8syeKOjbRvopRfn3Nwkbd76V3YSfEgwoTG5W
 ET1sOnXLmHHdeifn/l1Am5FX1FYstpcd7usUTJ4Oto8y7e09tw3bGJCD0aMJ3vow
 v1pCUWohEw7fHqoPc9rTrc1QEnkdML4vjJvMPUzwyTfPrN+7uEuMIEeJierW+qE=
 =0qrg
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "The big highlight is support for the Scalable Vector Extension (SVE)
  which required extensive ABI work to ensure we don't break existing
  applications by blowing away their signal stack with the rather large
  new vector context (<= 2 kbit per vector register). There's further
  work to be done optimising things like exception return, but the ABI
  is solid now.

  Much of the line count comes from some new PMU drivers we have, but
  they're pretty self-contained and I suspect we'll have more of them in
  future.

  Plenty of acronym soup here:

   - initial support for the Scalable Vector Extension (SVE)

   - improved handling for SError interrupts (required to handle RAS
     events)

   - enable GCC support for 128-bit integer types

   - remove kernel text addresses from backtraces and register dumps

   - use of WFE to implement long delay()s

   - ACPI IORT updates from Lorenzo Pieralisi

   - perf PMU driver for the Statistical Profiling Extension (SPE)

   - perf PMU driver for Hisilicon's system PMUs

   - misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
  arm64: Make ARMV8_DEPRECATED depend on SYSCTL
  arm64: Implement __lshrti3 library function
  arm64: support __int128 on gcc 5+
  arm64/sve: Add documentation
  arm64/sve: Detect SVE and activate runtime support
  arm64/sve: KVM: Hide SVE from CPU features exposed to guests
  arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
  arm64/sve: KVM: Prevent guests from using SVE
  arm64/sve: Add sysctl to set the default vector length for new processes
  arm64/sve: Add prctl controls for userspace vector length management
  arm64/sve: ptrace and ELF coredump support
  arm64/sve: Preserve SVE registers around EFI runtime service calls
  arm64/sve: Preserve SVE registers around kernel-mode NEON use
  arm64/sve: Probe SVE capabilities and usable vector lengths
  arm64: cpufeature: Move sys_caps_initialised declarations
  arm64/sve: Backend logic for setting the vector length
  arm64/sve: Signal handling support
  arm64/sve: Support vector length resetting for new processes
  arm64/sve: Core task context handling
  arm64/sve: Low-level CPU setup
  ...
2017-11-15 10:56:56 -08:00
Lorenzo Pieralisi
65637901a3 ACPI/IORT: Enable SMMUv3/PMCG IORT MSI domain set-up
ITS specific mappings for SMMUv3/PMCG components can be retrieved
through special index mapping entries introduced in IORT revision C.

Introduce a new API iort_set_device_domain() to set the MSI domain for
SMMUv3/PMCG nodes (extendable to any future IORT node requiring special
index ITS mapping entries) that represent MSI through special index
mappings in order to enable MSI support for the devices their nodes
represent.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
2017-10-16 14:30:15 +01:00
Hanjun Guo
86456a3f19 ACPI/IORT: Add SMMUv3 specific special index mapping handling
IORT revision C introduced a mapping entry binding to describe ITS
device ID mapping for SMMUv3 MSI interrupts.

Enable the single mapping flag (ie that is used by SMMUv3 component for
its special index mappings) for the SMMUv3 node in the IORT mapping API
and add IORT code to handle special index mapping entry for the SMMUv3
IORT nodes to enable their MSI interrupts. In case the ACPICA for
SMMUv3 device ID mapping is not ready, use the ACPICA version as a guard
for function iort_get_id_mapping_index().

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[lorenzo.pieralisi@arm.com: patch split, typos fixing, rewrote the log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-16 14:30:05 +01:00
Hanjun Guo
8c8df8dcd6 ACPI/IORT: Enable special index ITS group mappings for IORT nodes
IORT revision C introduced SMMUv3 and PMCG MSI support by adding
specific mapping entries in the SMMUv3/PMCG subtables to retrieve
the device ID and the ITS group it maps to for a given SMMUv3/PMCG
IORT node.

Introduce a mapping function (ie iort_get_id_mapping_index()), that
for a given IORT node looks up if an ITS specific ID mapping entry
exists and if so retrieve the corresponding mapping index in the IORT
node mapping array.

Since an ITS specific index mapping can be present for an IORT
node that is not a leaf node (eg SMMUv3 - to describe its own
ITS device ID) special handling is required for two steps mapping
cases such as PCI/NamedComponent--->SMMUv3--->ITS because the SMMUv3
ITS specific index mapping entry should be skipped to prevent the
IORT API from considering the mapping entry as a regular mapping one.

If we take the following IORT topology example:

|----------------------|
|  Root Complex Node   |
|----------------------|
|    map entry[x]      |
|----------------------|
|       id value       |
| output_reference     |
|---|------------------|
    |
    |   |----------------------|
    |-->|        SMMUv3        |
        |----------------------|
        |     SMMUv3 dev ID    |
        |     mapping index 0  |
        |----------------------|
        |      map entry[0]    |
        |----------------------|
        |       id value       |
        | output_reference-----------> ITS 1 (SMMU MSI domain)
        |----------------------|
        |      map entry[1]    |
        |----------------------|
        |       id value       |
        | output_reference-----------> ITS 2 (PCI MSI domain)
        |----------------------|

where the SMMUv3 ITS specific mapping entry is index 0 and it
represents the SMMUv3 ITS specific index mapping entry (describing its
own ITS device ID), we need to skip that mapping entry while carrying
out the Root Complex Node regular mappings to prevent erroneous
translations.

Reuse the iort_get_id_mapping_index() function to detect the ITS
specific mapping index for a specific IORT node and skip it in the IORT
mapping API (ie iort_node_map_id()) loop to prevent considering it a
normal PCI/Named Component ID mapping entry.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[lorenzo.pieralisi@arm.com: split patch/rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-16 14:29:55 +01:00
Hanjun Guo
0a71d8b95f ACPI/IORT: Look up IORT node through struct fwnode_handle pointer
Current IORT code provides a function (ie iort_get_fwnode())
which looks up a struct fwnode_handle pointer through a
struct acpi_iort_node pointer for SMMU components but it
lacks a function that implements the reverse look-up, namely
struct fwnode_handle* -> struct acpi_iort_node*.

Devices that are not IORT named components cannot be retrieved through
their associated IORT named component scan interface because they just
are not represented in the ACPI namespace; the reverse look-up is
therefore required for all platform devices that represent IORT nodes
(eg SMMUs) so that the struct acpi_iort_node* can be retrieved from the
struct device->fwnode pointer.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
[lorenzo.pieralisi@arm.com: re-indented/rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-10-16 14:29:45 +01:00
Lorenzo Pieralisi
896dd2c324 ACPI/IORT: Make platform devices initialization code SMMU agnostic
The way current IORT code initializes platform devices for SMMU nodes
is somewhat tied (mostly for naming convention) to the SMMU nodes
themselves but it need not be in that it is completely generic and
can easily be made so by structures renaming and code reshuffling.

Rework IORT platform devices initialization code to make the functions
and data structures SMMU agnostic.

No functional changes intended.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
2017-10-16 14:29:24 +01:00
Lorenzo Pieralisi
e3d4939267 ACPI/IORT: Improve functions return type/storage class specifier indentation
Some functions definition indentations are using a style that is frowned
upon with return value type/storage class specifier in a separate line.

Reindent the function definitions to fix them.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
2017-10-16 14:26:03 +01:00
Lorenzo Pieralisi
758081312e ACPI/IORT: Remove leftover ACPI_IORT_SMMU_V3_PXM_VALID guard
The conditional ACPI_IORT_SMMU_V3_PXM_VALID guard around
arm_smmu_v3_set_proximity() was added to manage a cross tree
ACPICA merge dependency; with ACPICA changes merged in:

commit c944230064 ("ACPICA: iasl: Update to IORT SMMUv3
disassembling")

the guard has become useless. Remove it.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
2017-10-16 14:25:52 +01:00
Arvind Yadav
ee10b9c927 acpi/arm64: pr_err() strings should end with newlines
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
2017-10-16 14:25:43 +01:00
Lorenzo Pieralisi
37f6b42e9c ACPI/IORT: Fix PCI ACS enablement
commit f6810c15cf ("iommu/arm-smmu: Clean up early-probing
workarounds") removed kernel code that was allowing to initialize
and probe the SMMU devices early (ie earlier than PCI devices, through
linker script callback entries) in the boot process because it was not
needed any longer in that the SMMU devices/drivers now support deferred
probing.

Since the SMMUs probe routines are also in charge of requesting global
PCI ACS kernel enablement, commit f6810c15cf ("iommu/arm-smmu: Clean
up early-probing workarounds") also postponed PCI ACS enablement to
SMMUs devices probe time, which is too late given that PCI devices needs
to detect if PCI ACS is enabled to init the respective capability
through the following call path:

pci_device_add()
 -> pci_init_capabilities()
  -> pci_enable_acs()

Add code in the ACPI IORT SMMU platform devices initialization path
(that is called before ACPI PCI enumeration) to detect if there
exists firmware mappings to map root complexes ids to SMMU ids
and if so enable ACS for the system.

Fixes: f6810c15cf ("iommu/arm-smmu: Clean up early-probing workarounds")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-04 17:34:41 +01:00
Linus Torvalds
53ac64aac9 ACPI updates for v4.14-rc1
- Update the ACPICA code in the kernel to upstream revision 20170728
    including:
    * Alias operator handling update (Bob Moore).
    * Deferred resolution of reference package elements (Bob Moore).
    * Support for the _DMA method in walk resources (Bob Moore).
    * Tables handling update and support for deferred table
      verification (Lv Zheng).
    * Update of SMMU models for IORT (Robin Murphy).
    * Compiler and disassembler updates (Alex James, Erik Schmauss,
      Ganapatrao Kulkarni, James Morse).
    * Tools updates (Erik Schmauss, Lv Zheng).
    * Assorted minor fixes and cleanups (Bob Moore, Kees Cook,
      Lv Zheng, Shao Ming).
 
  - Rework the initialization of non-wakeup GPEs with method handlers
    in order to address a boot crash on some systems with Thunderbolt
    devices connected at boot time where we miss an early hotplug
    event due to a delay in GPE enabling (Rafael Wysocki).
 
  - Rework the handling of PCI bridges when setting up ACPI-based
    device wakeup in order to avoid disabling wakeup for bridges
    prematurely (Rafael Wysocki).
 
  - Consolidate Apple DMI checks throughout the tree, add support for
    Apple device properties to the device properties framework and
    use these properties for the handling of I2C and SPI devices on
    Apple systems (Lukas Wunner).
 
  - Add support for _DMA to the ACPI-based device properties lookup
    code and make it possible to use the information from there to
    configure DMA regions on ARM64 systems (Lorenzo Pieralisi).
 
  - Fix several issues in the APEI code, add support for exporting
    the BERT error region over sysfs and update APEI MAINTAINERS
    entry with reviewers information (Borislav Petkov, Dongjiu Geng,
    Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam).
 
  - Fix a potential initialization ordering issue in the ACPI EC
    driver and clean it up somewhat (Lv Zheng).
 
  - Update the ACPI SPCR driver to extend the existing XGENE 8250
    workaround in it to a new platform (m400) and to work around
    an Xgene UART clock issue (Graeme Gregory).
 
  - Add a new utility function to the ACPI core to support using
    ACPI OEM ID / OEM Table ID / Revision for system identification
    in blacklisting or similar and switch over the existing code
    already using this information to this new interface (Toshi Kani).
 
  - Fix an xpower PMIC issue related to GPADC reads that always return
    0 without extra pin manipulations (Hans de Goede).
 
  - Add statements to print debug messages in a couple of places in
    the ACPI core for easier diagnostics (Rafael Wysocki).
 
  - Clean up the ACPI processor driver slightly (Colin Ian King,
    Hanjun Guo).
 
  - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).
 
  - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight
    driver (Alex Hung).
 
  - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
    Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
    Ronald Tschalär, Sumeet Pawnikar).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcE+AAoJEILEb/54YlRxVGAP/RKzkJlYlOIXtMjf4XWg5ZfJ
 RKZA68E9DW179KoBoTCVPD6/eD5UoEJ7fsWXFU2Hgp2xL3N1mZMAJHgAE4GoAwCx
 uImoYvQgdPna7DawzRIFkvkfceYxNyh+KaV9s7xne4hAwsB7JzP9yf5Ywll53+oF
 Le27/r6lDOaWhG7uYcxSabnQsWZQkBF5mj2GPzEpKDIHcLA1Vii0URzm7mAHdZsz
 vGjYhxrshKYEVdkLSRn536m1rEfp2fqsRJ5wqNAazZJr6Cs1WIfNVuv/RfduRJpG
 /zHIRAmgKV+3jp39cBpjdnexLczb1rGiCV1yZOvwCNM7jy4evL8vbL7VgcUCopaj
 fHbF34chNG/hKJd3Zn3RRCTNzCs6bv+txslOMARxji5eyr2Q4KuVnvg5LM4hxOUP
 23FvcYkBYWu4QCNLOTnC7y2OqK6WzOvDpfi7hf13Z42iNzeAUbwt1sVF0/OCwL51
 Og6blSy2x8FidKp8oaBBboBzHEiKWnXBj/Hw8KEHVcsqZv1ZC6igNRAL3tjxamU8
 98/Z2NSZHYPrrrn13tT9ywISYXReXzUF85787+0ofugvDe8/QyBH6UhzzZc/xKVA
 t329JEjEFZZSLgxMIIa9bXoQANxkeZEGsxN6FfwvQhyIVdagLF3UvCjZl/q2NScC
 9n++s32qfUBRHetGODWc
 =6Ke9
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These include a usual ACPICA code update (this time to upstream
  revision 20170728), a fix for a boot crash on some systems with
  Thunderbolt devices connected at boot time, a rework of the handling
  of PCI bridges when setting up device wakeup, new support for Apple
  device properties, support for DMA configurations reported via ACPI on
  ARM64, APEI-related updates, ACPI EC driver updates and assorted minor
  modifications in several places.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170728
     including:
      * Alias operator handling update (Bob Moore).
      * Deferred resolution of reference package elements (Bob Moore).
      * Support for the _DMA method in walk resources (Bob Moore).
      * Tables handling update and support for deferred table
        verification (Lv Zheng).
      * Update of SMMU models for IORT (Robin Murphy).
      * Compiler and disassembler updates (Alex James, Erik Schmauss,
        Ganapatrao Kulkarni, James Morse).
      * Tools updates (Erik Schmauss, Lv Zheng).
      * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv
        Zheng, Shao Ming).

   - Rework the initialization of non-wakeup GPEs with method handlers
     in order to address a boot crash on some systems with Thunderbolt
     devices connected at boot time where we miss an early hotplug event
     due to a delay in GPE enabling (Rafael Wysocki).

   - Rework the handling of PCI bridges when setting up ACPI-based
     device wakeup in order to avoid disabling wakeup for bridges
     prematurely (Rafael Wysocki).

   - Consolidate Apple DMI checks throughout the tree, add support for
     Apple device properties to the device properties framework and use
     these properties for the handling of I2C and SPI devices on Apple
     systems (Lukas Wunner).

   - Add support for _DMA to the ACPI-based device properties lookup
     code and make it possible to use the information from there to
     configure DMA regions on ARM64 systems (Lorenzo Pieralisi).

   - Fix several issues in the APEI code, add support for exporting the
     BERT error region over sysfs and update APEI MAINTAINERS entry with
     reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit
     Agrawal, Tony Luck, Yazen Ghannam).

   - Fix a potential initialization ordering issue in the ACPI EC driver
     and clean it up somewhat (Lv Zheng).

   - Update the ACPI SPCR driver to extend the existing XGENE 8250
     workaround in it to a new platform (m400) and to work around an
     Xgene UART clock issue (Graeme Gregory).

   - Add a new utility function to the ACPI core to support using ACPI
     OEM ID / OEM Table ID / Revision for system identification in
     blacklisting or similar and switch over the existing code already
     using this information to this new interface (Toshi Kani).

   - Fix an xpower PMIC issue related to GPADC reads that always return
     0 without extra pin manipulations (Hans de Goede).

   - Add statements to print debug messages in a couple of places in the
     ACPI core for easier diagnostics (Rafael Wysocki).

   - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun
     Guo).

   - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).

   - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver
     (Alex Hung).

   - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
     Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
     Ronald Tschalär, Sumeet Pawnikar)"

* tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  ACPI / APEI: Suppress message if HEST not present
  intel_pstate: convert to use acpi_match_platform_list()
  ACPI / blacklist: add acpi_match_platform_list()
  ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
  ACPI: make device_attribute const
  ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
  ACPI: APEI: fix the wrong iteration of generic error status block
  ACPI / processor: make function acpi_processor_check_duplicates() static
  ACPI / EC: Clean up EC GPE mask flag
  ACPI: EC: Fix possible issues related to EC initialization order
  ACPI / PM: Add debug statements to acpi_pm_notify_handler()
  ACPI: Add debug statements to acpi_global_event_handler()
  ACPI / scan: Enable GPEs before scanning the namespace
  ACPICA: Make it possible to enable runtime GPEs earlier
  ACPICA: Dispatch active GPEs at init time
  ACPI: SPCR: work around clock issue on xgene UART
  ACPI: SPCR: extend XGENE 8250 workaround to m400
  ACPI / LPSS: Don't abort ACPI scan on missing mem resource
  mailbox: pcc: Drop uninformative output during boot
  ACPI/IORT: Add IORT named component memory address limits
  ...
2017-09-05 12:45:03 -07:00
Arnd Bergmann
4d36037a9a ACPI/IORT: Fix build regression without IOMMU
A recent change reintroduced a bug that had previously been
fixed by commit d49f2dedf3 ("ACPI/IORT: Fix CONFIG_IOMMU_API
dependency"):

drivers/acpi/arm64/iort.c: In function 'iort_iommu_configure':
drivers/acpi/arm64/iort.c:829:26: error: 'struct iommu_fwspec' has no member named 'ops'

Replace a direct reference to iommu_fwspec->ops with a helper function
call to fix the issue.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-08-10 18:16:01 +01:00
Ganapatrao Kulkarni
5fe0ce3b9e ACPI/IORT: numa: Add numa node mapping for smmuv3 devices
ARM IORT specification(rev. C) has added  provision to define proximity
domain in SMMUv3 IORT table. Adding required code to parse Proximity
domain and set numa_node of smmv3 platform devices.

Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[lorenzo.pieralisi@arm.com: update pr_info()/commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-08-08 16:44:38 +01:00
Robin Murphy
bc8648d49a ACPI/IORT: Handle PCI aliases properly for IOMMUs
When a PCI device has DMA quirks, we need to ensure that an upstream
IOMMU knows about all possible aliases, since the presence of a DMA
quirk does not preclude the device still also emitting transactions
(e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing
are relatively complex, and some bridges may only take ownership of
transactions under particular transient circumstances, leading again to
multiple RIDs potentially being seen at the IOMMU for the given device.

Take all this into account in iort_iommu_configure() by mapping every
RID produced by the alias walk, not just whichever one comes out last.
Since adding any more internal PTR_ERR() juggling would have confused me
no end, a bit of refactoring happens in the process - we know where to
find the ops if everything succeeded, so we're free to just pass regular
error codes around up until then.

CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Hanjun Guo <hanjun.guo@linaro.org>
CC: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[lorenzo.pieralisi@arm.com: tagged __get_pci_rid __maybe_unused]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2017-08-08 15:44:27 +01:00
Lorenzo Pieralisi
10d8ab2c15 ACPI/IORT: Add IORT named component memory address limits
IORT named components provide firmware configuration describing
how many address bits a given device is capable of generating
to address memory.

Add code to the kernel to retrieve memory address limits
configuration for IORT named components and configure DMA masks
accordingly.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-07 14:29:09 +02:00
Lorenzo Pieralisi
7ad4263980 ACPI: Make acpi_dma_configure() DMA regions aware
Current ACPI DMA configuration set-up device DMA capabilities through
kernel defaults that do not take into account platform specific DMA
configurations reported by firmware.

By leveraging the ACPI acpi_dev_get_dma_resources() API, add code
in acpi_dma_configure() to retrieve the DMA regions to correctly
set-up PCI devices DMA parameters.

Rework the ACPI IORT kernel API to make sure they can accommodate
the DMA set-up required by firmware. By making PCI devices DMA set-up
ACPI IORT specific, the kernel is shielded from unwanted regressions
that could be triggered by parsing DMA resources on arches that were
previously ignoring them (ie x86/ia64), leaving kernel behaviour
unchanged on those arches.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-07 14:28:51 +02:00
Linus Torvalds
fb4e3beeff IOMMU Updates for Linux v4.13
This update comes with:
 
 	* Support for lockless operation in the ARM io-pgtable code.
 	  This is an important step to solve the scalability problems in
 	  the common dma-iommu code for ARM
 
 	* Some Errata workarounds for ARM SMMU implemenations
 
 	* Rewrite of the deferred IO/TLB flush code in the AMD IOMMU
 	  driver. The code suffered from very high flush rates, with the
 	  new implementation the flush rate is down to ~1% of what it
 	  was before
 
 	* Support for amd_iommu=off when booting with kexec. Problem
 	  here was that the IOMMU driver bailed out early without
 	  disabling the iommu hardware, if it was enabled in the old
 	  kernel
 
 	* The Rockchip IOMMU driver is now available on ARM64
 
 	* Align the return value of the iommu_ops->device_group
 	  call-backs to not miss error values
 
 	* Preempt-disable optimizations in the Intel VT-d and common
 	  IOVA code to help Linux-RT
 
 	* Various other small cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZZgddAAoJECvwRC2XARrjurgQANO338GIBr2ZkA0oectidDpZ
 Y4yu7W9RH6NyhupJG/Xooya7daBWFjbaA1AVJ3ZZNlMERh69AmehVfRUfVMzF2w+
 buma58HQgiJWN1zFD8xdeMzYKms9P77whA88C/9QvrK/klB3LipWP2SC0yvvvyxJ
 mMCDpgt+D+CGnIDqbRuyLDQoRu3yjAkAvYb6OzL8DPJVP1Y5oLffGwGnHzJbJnOf
 eWJwYHM5ai0uF/Qqy6RNNekacObjVaOLihjugGvokH6ipXfOrSSNriXW9pZiWR5m
 S91898YTP3KuWWsJM+N93UAjvc6pL9PqL/OvbB9zdYpzu+5PtUpFXHYcOebKyEEO
 4j9CaRzubsWFTFjbYItJnR4WgXQRf4NKOGfTfHMHA+dY8aODYnlXNVdQDAA2aFgn
 TUBvHq5xb0zZ3nbPwtTDyW06oDMVfBBarLx2yFI1aQSSh+eg/GtIi5KP28gyFZNz
 4gWj0q3g/e3y7WEwNbYV7L3TS0d/p8VUYFtUp7PUCddnWoY+4cJzgidub5xIViZD
 Ql0nZzga9pXXIE/kE5Pf74WqrG7JJzZsvK2ABy4+XGrMq6RclJf+0pXbSqiXDpXL
 quw8t0oXw0ZEeavQ31Za8mjXBvo5ocM5iintl1wrl2BujHEO3oKqbGsIOaRcLnlN
 Ukehbl4OEKzZpD3oLPPk
 =pmBf
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This update comes with:

   - Support for lockless operation in the ARM io-pgtable code.

     This is an important step to solve the scalability problems in the
     common dma-iommu code for ARM

   - Some Errata workarounds for ARM SMMU implemenations

   - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver.

     The code suffered from very high flush rates, with the new
     implementation the flush rate is down to ~1% of what it was before

   - Support for amd_iommu=off when booting with kexec.

     The problem here was that the IOMMU driver bailed out early without
     disabling the iommu hardware, if it was enabled in the old kernel

   - The Rockchip IOMMU driver is now available on ARM64

   - Align the return value of the iommu_ops->device_group call-backs to
     not miss error values

   - Preempt-disable optimizations in the Intel VT-d and common IOVA
     code to help Linux-RT

   - Various other small cleanups and fixes"

* tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Constify intel_dma_ops
  iommu: Warn once when device_group callback returns NULL
  iommu/omap: Return ERR_PTR in device_group call-back
  iommu: Return ERR_PTR() values from device_group call-backs
  iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device()
  iommu/vt-d: Don't disable preemption while accessing deferred_flush()
  iommu/iova: Don't disable preempt around this_cpu_ptr()
  iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126
  iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701)
  iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74
  ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model
  iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions
  iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table
  iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE
  iommu/arm-smmu-v3: Remove io-pgtable spinlock
  iommu/arm-smmu: Remove io-pgtable spinlock
  iommu/io-pgtable-arm-v7s: Support lockless operation
  iommu/io-pgtable-arm: Support lockless operation
  iommu/io-pgtable: Introduce explicit coherency
  iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
  ...
2017-07-12 10:00:04 -07:00
Linus Torvalds
55a7b2125c arm64 updates for 4.13:
- RAS reporting via GHES/APEI (ACPI)
 - Indirect ftrace trampolines for modules
 - Improvements to kernel fault reporting
 - Page poisoning
 - Sigframe cleanups and preparation for SVE context
 - Core dump fixes
 - Sparse fixes (mainly relating to endianness)
 - xgene SoC PMU v3 driver
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJZWiuVAAoJELescNyEwWM0g/gIAIRpVEzjE61zfm/KCsVuIu4O
 p6F/HrvF/ApvlFcth8LDpTDYUholzT1e9wmx/O0Ll37UvFUrReT03R5MMJ02WU8s
 hRg0N4izdg2BPa9zuaP/XE5i6WmFfRAwFsv6PzX77FjNGk0M4zhW8acNpWHYMBQT
 DwXT/xCvg6045Sj6CuwfcIqqVHrz6/kpBmvdbW7G3/WpIHpUGIWM9EO3mkuLGMj0
 j0VSCxfAVJvWwmKEBdFExLNjqxvSlVAMOIEAw7yBNLjuheiL+afK+Y1BggB00oe8
 14+6viOgW6L97VmPpYVn0YDseqeGg5DqlNF3NqjTqdmzWH/ApAvL4WXN7SL2jbU=
 =RNzb
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:

 - RAS reporting via GHES/APEI (ACPI)

 - Indirect ftrace trampolines for modules

 - Improvements to kernel fault reporting

 - Page poisoning

 - Sigframe cleanups and preparation for SVE context

 - Core dump fixes

 - Sparse fixes (mainly relating to endianness)

 - xgene SoC PMU v3 driver

 - Misc cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: fix endianness annotation for 'struct jit_ctx' and friends
  arm64: cpuinfo: constify attribute_group structures.
  arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set()
  arm64: ptrace: Remove redundant overrun check from compat_vfp_set()
  arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails
  arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn()
  arm64: fix endianness annotation in get_kaslr_seed()
  arm64: add missing conversion to __wsum in ip_fast_csum()
  arm64: fix endianness annotation in acpi_parking_protocol.c
  arm64: use readq() instead of readl() to read 64bit entry_point
  arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm()
  arm64: fix endianness annotation for aarch64_insn_write()
  arm64: fix endianness annotation in aarch64_insn_read()
  arm64: fix endianness annotation in call_undef_hook()
  arm64: fix endianness annotation for debug-monitors.c
  ras: mark stub functions as 'inline'
  arm64: pass endianness info to sparse
  arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels
  arm64: signal: Allow expansion of the signal frame
  acpi: apei: check for pending errors when probing GHES entries
  ...
2017-07-05 17:09:27 -07:00
Joerg Roedel
0b25635bd4 Merge branch 'for-joerg/arm-smmu/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu 2017-06-28 10:42:54 +02:00