When there are no read queues read requests will be assigned a
default queue on allocation. However, blk_mq_get_cached_request() is not
prepared for that and will fail all attempts to grab read requests from
the cache. Worst case it doubles the number of requests allocated,
roughly half of which will be returned by blk_mq_free_plug_rqs().
It only affects batched allocations and so is io_uring specific.
For reference, QD8 t/io_uring benchmark improves by 20-35%.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/80d4511011d7d4751b4cf6375c4e38f237d935e3.1673955390.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Texas Instruments TUSB8041 has an autosuspend problem at high
temperature.
If there is not USB traffic, after a couple of ms, the device enters in
autosuspend mode. In this condition the external clock stops working, to
save energy. When the USB activity turns on, ther hub exits the
autosuspend state, the clock starts running again and all works fine.
At ambient temperature all works correctly, but at high temperature,
when the USB activity turns on, the external clock doesn't restart and
the hub disappears from the USB bus.
Disabling the autosuspend mode for this hub solves the issue.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221219124759.3207032-1-f.suligoi@asem.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct device driver-data pointer is used for any data that a driver
may need in various callbacks while bound to the device. For
convenience, subsystems typically provide wrappers such as
usb_set_intfdata() of the generic accessor functions for use in bus
callbacks.
There is generally no longer any need for a driver to clear the pointer,
but since commit 0998d06310 ("device-core: Ensure drvdata = NULL when
no driver is bound") the driver-data pointer is set to NULL by driver
core post unbind anyway.
For historical reasons, USB core also clears this pointer when an
explicitly claimed interface is released.
Due to a misunderstanding, a misleading kernel doc comment for
usb_set_intfdata() was recently added which claimed that the driver data
pointer must not be cleared during disconnect before "all actions [are]
completed", which is both imprecise and incorrect.
Specifically, drivers like cdc-acm which claim additional interfaces use
the driver-data pointer as a flag which is cleared when the first
interface is unbound. As long as a driver does not do something odd like
dereference the pointer in, for example, completion callbacks, this can
be done at any time during disconnect. And in any case this is no
different than for any other resource, like the driver data itself,
which may be freed by the disconnect callback.
Note that the comment actually also claimed that the interface itself
was somehow being set to NULL by driver core.
Fix the kernel doc by removing incorrect, overly specific and misleading
details and adding a comment about why some drivers do clear the
driver-data pointer.
Fixes: 27ef178497 ("usb: add usb_set_intfdata() documentation")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221212152035.31806-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In Google internal bug 265639009 we've received an (as yet) unreproducible
crash report from an aarch64 GKI 5.10.149-android13 running device.
AFAICT the source code is at:
https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10
The call stack is:
ncm_close() -> ncm_notify() -> ncm_do_notify()
with the crash at:
ncm_do_notify+0x98/0x270
Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b)
Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...):
// halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification)
0B 0D 00 79 strh w11, [x8, #6]
// word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request)
6C 0A 00 B9 str w12, [x19, #8]
// x10 (NULL) was read here from offset 0 of valid pointer x9
// IMHO we're reading 'cdev->gadget' and getting NULL
// gadget is indeed at offset 0 of struct usb_composite_dev
2A 01 40 F9 ldr x10, [x9]
// loading req->buf pointer, which is at offset 0 of struct usb_request
69 02 40 F9 ldr x9, [x19]
// x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed
4B 5D 40 B9 ldr w11, [x10, #0x5c]
which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment:
event->wLength = cpu_to_le16(8);
req->length = NCM_STATUS_BYTECOUNT;
/* SPEED_CHANGE data is up/down speeds in bits/sec */
data = req->buf + sizeof *event;
data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
My analysis of registers and NULL ptr deref crash offset
(Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c)
heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing:
data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
which calls:
ncm_bitrate(NULL)
which then calls:
gadget_is_superspeed(NULL)
which reads
((struct usb_gadget *)NULL)->max_speed
and hits a panic.
AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C.
(remember there's a GKI KABI reservation of 16 bytes in struct work_struct)
It's not at all clear to me how this is all supposed to work...
but returning 0 seems much better than panic-ing...
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is unable to use configfs to attach more than one gadget. When
attaching the second gadget, it always fails and the kernel message
prints out:
Error: Driver 'configfs-gadget' is already registered, aborting...
UDC core: g1: driver registration failed: -16
This commit fixes the problem by using the gadget name as a suffix
to each configfs_gadget's driver name, thus making the names
distinct.
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Cc: stable <stable@kernel.org>
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Link: https://lore.kernel.org/r/20230111065105.29205-1-chanh@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's the altmode re-registeration issue after data role
swap (DR_SWAP).
Comparing to USBPD 2.0, in USBPD 3.0, it loose the limit that only DFP
can initiate the VDM command to get partner identity information.
For a USBPD 3.0 UFP device, it may already get the identity information
from its port partner before DR_SWAP. If DR_SWAP send or receive at the
mean time, 'send_discover' flag will be raised again. It causes discover
identify action restart while entering ready state. And after all
discover actions are done, the 'tcpm_register_altmodes' will be called.
If old altmode is not unregistered, this sysfs create fail can be found.
In 'DR_SWAP_CHANGE_DR' state case, only DFP will unregister altmodes.
For UFP, the original altmodes keep registered.
This patch fix the logic that after DR_SWAP, 'tcpm_unregister_altmodes'
must be called whatever the current data role is.
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Fixes: ae8a2ca8a2 ("usb: typec: Group all TCPCI/TCPM code together")
Reported-by: TommyYl Chen <tommyyl.chen@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1673248790-15794-1-git-send-email-cy_huang@richtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the color matching descriptor is only sent across the wire
a single time, following the descriptors for each format and frame.
According to the UVC 1.5 Specification 3.9.2.6 ("Color Matching
Descriptors"):
"Only one instance is allowed for a given format and if present,
the Color Matching descriptor shall be placed following the Video
and Still Image Frame descriptors for that format".
Add another reference to the color matching descriptor after the
yuyv frames so that it's correctly transmitted for that format
too.
Fixes: a9914127e8 ("USB gadget: Webcam device")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20221216160528.479094-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While looking at the DP configuration VDO to determine the peripheral
configuration, the spec (Table 8-5: DisplayPort Configurations, VESA
DisplayPort Alt Mode Standard v2.0) lists the options as "UFP_U as a DP
Source/Sink Device".
So, use the correct macro while performing this check. Effectively it's
the same as the existing code, but the proposed macro describes the
state a little better.
No functional changes introduced.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111020546.3384569-3-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c1e5c2f0cb ("usb: typec: altmodes/displayport: correct pin
assignment for UFP receptacles") fixed the pin assignment calculation
to take into account whether the peripheral was a plug or a receptacle.
But the "pin_assignments" sysfs logic was not updated. Address this by
using the macros introduced in the aforementioned commit in the sysfs
logic too.
Fixes: c1e5c2f0cb ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111020546.3384569-2-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code to extract a peripheral's currently supported Pin Assignments
is repeated in a couple of locations. Factor it out into a separate
function.
This will also make it easier to add fixes (we only need to update 1
location instead of 2).
Fixes: c1e5c2f0cb ("usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111020546.3384569-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the documentation, function usb_ep_free_request guarantees
the request will not be queued or no longer be re-queued (or
otherwise used). However, with the current implementation it
doesn't make sure that the request in ep0 isn't reused.
Fix this by dequeuing the ep0req on functionfs_unbind before
freeing the request to align with the definition.
Fixes: ddf8abd259 ("USB: f_fs: the FunctionFS driver")
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20221215052906.8993-3-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While performing fast composition switch, there is a possibility that the
process of ffs_ep0_write/ffs_ep0_read get into a race condition
due to ep0req being freed up from functionfs_unbind.
Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait
by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't
bounded so it can go ahead and mark the ep0req to NULL, and since there
is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free.
Fix this by making a serialized execution between the two functions using
a mutex_lock(ffs->mutex).
Fixes: ddf8abd259 ("USB: f_fs: the FunctionFS driver")
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Tested-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/20221215052906.8993-2-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently each onboard_hub platform device owns an 'attach' work,
which is scheduled when the device probes. With this deadlocks
have been reported on a Raspberry Pi 3 B+ [1], which has nested
onboard hubs.
The flow of the deadlock is something like this (with the onboard_hub
driver built as a module) [2]:
- USB root hub is instantiated
- core hub driver calls onboard_hub_create_pdevs(), which creates the
'raw' platform device for the 1st level hub
- 1st level hub is probed by the core hub driver
- core hub driver calls onboard_hub_create_pdevs(), which creates
the 'raw' platform device for the 2nd level hub
- onboard_hub platform driver is registered
- platform device for 1st level hub is probed
- schedules 'attach' work
- platform device for 2nd level hub is probed
- schedules 'attach' work
- onboard_hub USB driver is registered
- device (and parent) lock of hub is held while the device is
re-probed with the onboard_hub driver
- 'attach' work (running in another thread) calls driver_attach(), which
blocks on one of the hub device locks
- onboard_hub_destroy_pdevs() is called by the core hub driver when one
of the hubs is detached
- destroying the pdevs invokes onboard_hub_remove(), which waits for the
'attach' work to complete
- waits forever, since the 'attach' work can't acquire the device lock
Use a single work struct for the driver instead of having a work struct
per onboard hub platform driver instance. With that it isn't necessary
to cancel the work in onboard_hub_remove(), which fixes the deadlock.
The work is only cancelled when the driver is unloaded.
[1] https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/
[2] https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/
Cc: stable@vger.kernel.org
Fixes: 8bc063641c ("usb: misc: Add onboard_usb_hub driver")
Link: https://lore.kernel.org/r/d04bcc45-3471-4417-b30b-5cf9880d785d@i2se.com/
Link: https://lore.kernel.org/all/Y6OrGbqaMy2iVDWB@google.com/
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230110172954.v2.2.I16b51f32db0c32f8a8532900bfe1c70c8572881a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The onboard_hub 'driver' consists of two drivers, a platform
driver and a USB driver. Currently when the onboard hub driver
is initialized it first registers the platform driver, then the
USB driver. This results in a race condition when the 'attach'
work is executed, which is scheduled when the platform device
is probed. The purpose of fhe 'attach' work is to bind elegible
USB hub devices to the onboard_hub USB driver. This fails if
the work runs before the USB driver has been registered.
Register the USB driver first, then the platform driver. This
increases the chances that the onboard_hub USB devices are probed
before their corresponding platform device, which the USB driver
tries to locate in _probe(). The driver already handles this
situation and defers probing if the onboard hub platform device
doesn't exist yet.
Cc: stable@vger.kernel.org
Fixes: 8bc063641c ("usb: misc: Add onboard_usb_hub driver")
Link: https://lore.kernel.org/lkml/Y6W00vQm3jfLflUJ@hovoldconsulting.com/T/#m0d64295f017942fd988f7c53425db302d61952b4
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230110172954.v2.1.I75494ebee7027a50235ce4b1e930fa73a578fbe2@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During ucsi_unregister() when destroying a connector's workqueue, there
may still be pending delayed work items that haven't been scheduled yet.
Because queue_delayed_work() uses a separate timer to schedule a work
item, the destroy_workqueue() call is not aware of any pending items.
Hence when a pending item's timer expires it would then try to queue on
a dangling workqueue pointer.
Fix this by keeping track of all work items in a list, so that prior to
destroying the workqueue any pending items can be flushed. Do this by
calling mod_delayed_work() as that will cause pending items to get
queued immediately, which then allows the ensuing destroy_workqueue() to
implicitly drain all currently queued items to completion and free
themselves.
Fixes: b9aa02ca39 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Jack Pham <quic_jackp@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before calling platform_get_resource() in omap2430_probe(), the 'ret' is
re-assgined to 0, it can't return an error code, if platform_get_resource
fails. Set the error code to -EINVAL to fix this.
Fixes: ffbe2feac5 ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221230081730.1655616-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After successfully probed, ci->role_switch would only be NULL or a valid
pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap
it with IS_ERR, otherwise the logic is wrong.
Fixes: e1b5d2bed6 ("usb: chipidea: core: handle usb role switch in a common way")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB3 ports on xHC hosts may have retimers that cause too long
exit latency to work with native USB3 U1/U2 link power management states.
For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm
should be disabled while setting up the USB3 roothub.
Other ways to identify lpm incapable ports can be added here later if
ACPI _DSM does not exist.
Limit this to Intel hosts for now, this is to my knowledge only
an Intel issue.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to evaluate ACPI usb device specific method (_DSM) provided
in case the USB3 port shouldn't enter U1 and U2 link states.
This _DSM was added as port specific retimer configuration may lead to
exit latencies growing beyond U1/U2 exit limits, and OS needs a way to
find which ports can't support U1/U2 link power management states.
This _DSM is also used by windows:
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-
Some patch issues found in testing resolved by Ron Lee
Cc: stable@vger.kernel.org
Tested-by: Ron Lee <ron.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One USB3 roothub port may support link power management, while another
root port on the same xHC can't due to different retimers used for
the ports.
This is the case with Intel Alder Lake, and possible future platforms
where retimers used for USB4 ports cause too long exit latecy to
enable native USB3 lpm U1 and U2 states.
Add a flag in the xhci port structure to indicate if the port is
lpm_incapable, and check it while calculating exit latency.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow PCI hosts to check and tune roothub and port settings
before the hub is up and running.
This override is needed to turn off U1 and U2 LPM for some ports
based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio
values for Intel xHC hosts.
Usb core calls the host update_hub_device once it creates a hub.
Entering U1 or U2 link power save state on ports with this limitation
will cause link to fail, turning the usb device unusable in that setup.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race
and cause null pointer dereference when host suddenly dies.
Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id]
virt device at the same time that xhci_kill_endpoint_urbs() tries to
loop through all the device's endpoints, checking if there are any
cancelled urbs left to give back.
hold the xhci spinlock while freeing the virt device
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the host controller is not responding, all URBs queued to all
endpoints need to be killed. This can cause a kernel panic if we
dereference an invalid endpoint.
Fix this by using xhci_get_virt_ep() helper to find the endpoint and
checking if the endpoint is valid before dereferencing it.
[233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead
[233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8
[233311.853964] pc : xhci_hc_died+0x10c/0x270
[233311.853971] lr : xhci_hc_died+0x1ac/0x270
[233311.854077] Call trace:
[233311.854085] xhci_hc_died+0x10c/0x270
[233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4
[233311.854105] call_timer_fn+0x50/0x2d4
[233311.854112] expire_timers+0xac/0x2e4
[233311.854118] run_timer_softirq+0x300/0xabc
[233311.854127] __do_softirq+0x148/0x528
[233311.854135] irq_exit+0x194/0x1a8
[233311.854143] __handle_domain_irq+0x164/0x1d0
[233311.854149] gic_handle_irq.22273+0x10c/0x188
[233311.854156] el1_irq+0xfc/0x1a8
[233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm]
[233311.854185] cpuidle_enter_state+0x1f0/0x764
[233311.854194] do_idle+0x594/0x6ac
[233311.854201] cpu_startup_entry+0x7c/0x80
[233311.854209] secondary_start_kernel+0x170/0x198
Fixes: 50e8725e7c ("xhci: Refactor command watchdog and fix split string.")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <0fe978ed-8269-9774-1c40-f8a98c17e838@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit e00b488e81 ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS")
blacklists UAS for all of RTL9210 enclosures.
The RTL9210 controller was advertised with UAS since its release back in
2019 and was shipped with a lot of enclosure products with different
firmware combinations.
Blacklist UAS only for HIKSEMI MD202.
This should hopefully be replaced with more robust method than just
comparing strings. But with limited information [1] provided thus far
(dmesg when the device is plugged in, which includes manufacturer and
product, but no lsusb -v to compare against), this is the best we can do
for now.
[1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com
Fixes: e00b488e81 ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS")
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hongling Zeng <zenghongling@kylinos.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer and Gerald Lee have identified a use-after-free bug
in the gadgetfs driver, involving processes concurrently mounting and
unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super()
can race with gadgetfs_kill_sb(), causing the latter to deallocate
the_device while the former is using it. The output from KASAN says,
in part:
BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline]
BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline]
BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline]
BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline]
BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline]
BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline]
BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086
Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689
CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
...
atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline]
__refcount_sub_and_test include/linux/refcount.h:272 [inline]
__refcount_dec_and_test include/linux/refcount.h:315 [inline]
refcount_dec_and_test include/linux/refcount.h:333 [inline]
put_dev drivers/usb/gadget/legacy/inode.c:159 [inline]
gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086
deactivate_locked_super+0xa7/0xf0 fs/super.c:332
vfs_get_super fs/super.c:1190 [inline]
get_tree_single+0xd0/0x160 fs/super.c:1207
vfs_get_tree+0x88/0x270 fs/super.c:1531
vfs_fsconfig_locked fs/fsopen.c:232 [inline]
The simplest solution is to ensure that gadgetfs_fill_super() and
gadgetfs_kill_sb() are serialized by making them both acquire a new
mutex.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+33d7ad66d65044b93f16@syzkaller.appspotmail.com
Reported-and-tested-by: Gerald Lee <sundaywind2004@gmail.com>
Link: https://lore.kernel.org/linux-usb/CAO3qeMVzXDP-JU6v1u5Ags6Q-bb35kg3=C6d04DjzA9ffa5x1g@mail.gmail.com/
Fixes: e5d82a7360 ("vfs: Convert gadgetfs to use the new mount API")
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Y6XCPXBpn3tmjdCC@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After doorbell DMA fetches the TRB. If during dequeuing request
driver changes NORMAL TRB to LINK TRB but doesn't delete it from
controller cache then controller will handle cached TRB and packet
can be lost.
The example scenario for this issue looks like:
1. queue request - set doorbell
2. dequeue request
3. send OUT data packet from host
4. Device will accept this packet which is unexpected
5. queue new request - set doorbell
6. Device lost the expected packet.
By setting DFLUSH controller clears DRDY bit and stop DMA transfer.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20221115100039.441295-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to pass 'end - 1' to ida_alloc_max after switch from
ida_simple_get to ida_alloc_max.
Otherwise smatch warns.
drivers/block/rnbd/rnbd-clt.c:1460 init_dev() error: Calling ida_alloc_max() with a 'max' argument which is a power of 2. -1 missing?
Fixes: 24afc15dbe ("block/rnbd: Remove a useless mutex")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20221230010926.32243-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This includes fixes for:
- on-board retimer scan return value
- runtime PM during tb_retimer_scan()
- USB3 link rate calculation
- XDomain lane bonding.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=2bPr
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
"thunderbolt: Fixes for v6.2-rc5
This includes fixes for:
- on-board retimer scan return value
- runtime PM during tb_retimer_scan()
- USB3 link rate calculation
- XDomain lane bonding.
All these have been in linux-next with no reported issues."
* tag 'thunderbolt-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Disable XDomain lane 1 only in software connection manager
thunderbolt: Use correct function to calculate maximum USB3 link rate
thunderbolt: Do not call PM runtime functions in tb_retimer_scan()
thunderbolt: Do not report errors if on-board retimers are found
This partially reverts commit f6d910a89a ("HID: usbhid: Add ALWAYS_POLL quirk
for some mice"), as it turns out to break reboot on some platforms for reason
yet to be understood.
Fixes: f6d910a89a ("HID: usbhid: Add ALWAYS_POLL quirk for some mice")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5
regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is
configured in GRF_IOFUNC regs according to TRM [1].
Update mux route data to reflect this and use proper detection pin for
UART1 IO mux M1.
This fixes HDMITX IO mux M1 selection and makes it possible to enable
HDMI CEC on my Radxa ROCK 3 Model A v1.31 board.
[1] http://opensource.rock-chips.com/images/2/26/Rockchip_RK3568_TRM_Part1_V1.3-20220930P.PDF
Fixes: c0dadc0e47 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230110084636.1141740-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In a number of cases the driver assigns a default value of -1 to
priv->plat->phy_addr. This may result in calling mdiobus_get_phy()
with addr parameter being -1. Therefore check for this scenario and
bail out before calling mdiobus_get_phy().
Fixes: 42e87024f7 ("net: stmmac: Fix case when PHY handle is not present")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Acer Aspire 4810T predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The previous ACPICA development list address, devel@acpica.org, started
to bounce some time ago and it is not likely to be restored, so replace
it with a new one, acpica-devel@lists.linuxfoundation.org.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a check for empty report_list in bigben_probe().
The missing check causes a type confusion when issuing a list_entry()
on an empty report_list.
The problem is caused by the assumption that the device must
have valid report_list. While this will be true for all normal HID
devices, a suitably malicious device can violate the assumption.
Fixes: 256a90ed9e ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a check for empty report_list in hid_validate_values().
The missing check causes a type confusion when issuing a list_entry()
on an empty report_list.
The problem is caused by the assumption that the device must
have valid report_list. While this will be true for all normal HID
devices, a suitably malicious device can violate the assumption.
Fixes: 1b15d2e5b8 ("HID: core: fix validation of report id 0")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The caller may pass any value as addr, what may result in an out-of-bounds
access to array mdio_map. One existing case is stmmac_init_phy() that
may pass -1 as addr. Therefore validate addr before using it.
Fixes: 7f854420fb ("phy: Add API for {un}registering an mdio device to a bus.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packet len computed as difference of length word extracted from
skb data and four may result in a negative value. In such case
processing of the buffer should be interrupted rather than
setting sr_skb->len to an unexpectedly large value (due to cast
from signed to unsigned integer) and passing sr_skb to
usbnet_skb_return.
Fixes: e9da0b56fe ("sr9700: sanity check for packet length")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When exception is triggered, code flow go handle_\exception in some
cases. One of stackframe in this case as follows,
high -> +-------+
| REGS | <- a pt_regs
| |
| | <- ex trigger
| REGS | <- ex pt_regs <-+
| | |
| | |
low -> +-------+ ->unwind-+
When unwinder unwinds to handler_\exception it cannot go on prologue
analysis. Because it is an asynchronous code flow, we should get the
next frame PC from regs->csr_era rather than regs->regs[1]. At init time
we copy the handlers to eentry and also copy them to NUMA-affine memory
named pcpu_handlers if NUMA is enabled. Thus, unwinder cannot unwind
normally. To solve this, we try to give some hints in handler_\exception
and fixup unwinders in unwind_next_frame().
Reported-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The prolugue unwinder rely on symbol info. When PC is not in kernel text
address, it cannot find relative symbol info and it will be broken. The
guess unwinder will be used in this case. And the guess unwinder code in
prolugue unwinder is redundant. Strip it out and set the unwinder type
in unwind_state. Make guess_unwinder::unwind_next_frame() as default way
when other unwinders cannot unwind in some extreme case.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The stack frame when function_graph enable like follows,
--------- <- function sp_on_entry
|
|
|
FAKE_RA <- sp_on_entry - sizeof(pt_regs) + PT_R1
|
--------- <- sp_on_entry - sizeof(pt_regs)
So if we want to get the &FAKE_RA we should get sp_on_entry first. In
the unwinder_prologue case, we can get the sp_on_entry as state->sp,
because we try to calculate each CFA and the ra saved address. But in
the unwinder_guess case, we cannot get it because we do not try to
calculate the CFA. Although LoongArch have not fixed frame, the $ra is
saved at CFA - 8 in most cases, we can try guess, too. As we store the
pc in state, we not need to dereference state->sp, too.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
At unwind_start(), it is better to get its frame info here rather than
get them outside, even we don't have 'regs'. In this way we can simply
use unwind_{start, next_frame, done} outside.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When state->first is not set, the PC is a return address in the previous
frame. We need to adjust its value in case overflow to the next symbol.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
