Commit Graph

3078 Commits

Author SHA1 Message Date
Linus Torvalds
556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00
Linus Torvalds
81ec44a6c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 update from Martin Schwidefsky:
 "The most prominent change in this patch set is the software dirty bit
  patch for s390.  It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and
  the page_test_and_clear_dirty primitive which makes the common memory
  management code a bit less obscure.

  Heiko fixed most of the PCI related fallout, more often than not
  missing GENERIC_HARDIRQS dependencies.  Notable is one of the 3270
  patches which adds an export to tty_io to be able to resize a tty.

  The rest is the usual bunch of cleanups and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
  s390/module: Add missing R_390_NONE relocation type
  drivers/gpio: add missing GENERIC_HARDIRQ dependency
  drivers/input: add couple of missing GENERIC_HARDIRQS dependencies
  s390/cleanup: rename SPP to LPP
  s390/mm: implement software dirty bits
  s390/mm: Fix crst upgrade of mmap with MAP_FIXED
  s390/linker skript: discard exit.data at runtime
  drivers/media: add missing GENERIC_HARDIRQS dependency
  s390/bpf,jit: add vlan tag support
  drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency
  iucv: fix kernel panic at reboot
  s390/Kconfig: sort list of arch selected config options
  phylib: remove !S390 dependeny from Kconfig
  uio: remove !S390 dependency from Kconfig
  dasd: fix sysfs cleanup in dasd_generic_remove
  s390/pci: fix hotplug module init
  s390/pci: cleanup clp page allocation
  s390/pci: cleanup clp inline assembly
  s390/perf: cpum_cf: fallback to software sampling events
  s390/mm: provide PAGE_SHARED define
  ...
2013-02-21 17:54:03 -08:00
Linus Torvalds
8793422fd9 ACPI and power management updates for 3.9-rc1
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.
 
 - ACPI power resources handling and ACPI device PM update from
   Rafael J. Wysocki.
 
 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng
   with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
   Tim Gardner.
 
 - Support for Intel Lynxpoint LPSS from Mika Westerberg.
 
 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
   with contributions from Stratos Karafotis and Rickard Andersson.
 
 - Intel P-states driver for Sandy Bridge processors from
   Dirk Brandewie.
 
 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
 
 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.
 
 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.
 
 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.
 
 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.
 
 - Support for "lightweight suspend" from Zhang Rui.
 
 - Removal of the deprecated power trace API from Paul Gortmaker.
 
 - Assorted updates from Andreas Fleig, Colin Ian King,
   Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
   Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
   Thomas Renninger, and Yasuaki Ishimatsu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRIsArAAoJEKhOf7ml8uNsD6MP/j7C4NA+GTq6RdwoJt+Yki0K
 9Ep8I4pEuRFoN/oskv24EyQhpGJIk6UxWcJ/DWFBc+1VhmKORta7k2Idv/wlJA77
 s7AcDveA9xcDh+TVfbh87TeuiMSXiSdDZbiaQO+wMizWJAF3F84AnjiAqqqyQcSK
 bA5/Siz/vWlt9PyYDaQtHTVE4lpvPuVcQdYewsdaH2PsmUjvIg/TUzg28CTrdyvv
 eHOdBK9R0/OLQLhzRbL0VOGJ//wEl+HJRO0QEhTKPgdQ1e/VH/4Zu5WSzF8P/x4C
 s2f8U4IKQqulDuDHXtpMpelFm7hRWgsOqZLkcyXLs+0dvSM9CTPO6P0ZaImxUctk
 5daHWEsXUnCErDQawt1mcZP8l6qnxofMQIfLXyPVzvlSnHyToTmrtXa1v2u4AuL/
 hOo4MYWsFNUmRdtGFFGlExGgEDZ4G5NwiYjRBl/6XJ3v4nhnnMbuzxP8scpoe5m1
 8tjroJHZFUUs/mFU/H+oRbHzSzXPmp1sddNaTg4OpVmTn3DDh6ljnFhiItd1Ndw0
 5ldVbSe6ETq5RoK0TbzvQOeVpa9F3JfqbrXLQPqfd2iz/No41LQYG1uShRYuXKuA
 wfEcc+c9VMd3FILu05pGwBnU8VS9VbxTYMz7xDxg6b29Ywnb7u+Q1ycCk2gFYtkS
 E2oZDuyewTJxaskzYsNr
 =wijn
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...
2013-02-20 11:26:56 -08:00
Linus Torvalds
5800700f66 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/apic changes from Ingo Molnar:
 "Main changes:

   - Multiple MSI support added to the APIC, PCI and AHCI code - acked
     by all relevant maintainers, by Alexander Gordeev.

     The advantage is that multiple AHCI ports can have multiple MSI
     irqs assigned, and can thus spread to multiple CPUs.

     [ Drivers can make use of this new facility via the
       pci_enable_msi_block_auto() method ]

   - x86 IOAPIC code from interrupt remapping cleanups from Joerg
     Roedel:

     These patches move all interrupt remapping specific checks out of
     the x86 core code and replaces the respective call-sites with
     function pointers.  As a result the interrupt remapping code is
     better abstraced from x86 core interrupt handling code.

   - Various smaller improvements, fixes and cleanups."

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess
  x86, kvm: Fix intialization warnings in kvm.c
  x86, irq: Move irq_remapped out of x86 core code
  x86, io_apic: Introduce eoi_ioapic_pin call-back
  x86, msi: Introduce x86_msi.compose_msi_msg call-back
  x86, irq: Introduce setup_remapped_irq()
  x86, irq: Move irq_remapped() check into free_remapped_irq
  x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq()
  x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
  x86, irq: Add data structure to keep AMD specific irq remapping information
  x86, irq: Move irq_remapping_enabled declaration to iommu code
  x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin
  x86, io_apic: Move irq_remapping_enabled checks out of check_timer()
  x86, io_apic: Convert setup_ioapic_entry to function pointer
  x86, io_apic: Introduce set_affinity function pointer
  x86, msi: Use IRQ remapping specific setup_msi_irqs routine
  x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
  x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging
  x86, io_apic: Introduce x86_io_apic_ops.disable()
  x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume
  ...
2013-02-19 19:07:27 -08:00
Linus Torvalds
8f55cea410 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "There are lots of improvements, the biggest changes are:

  Main kernel side changes:

   - Improve uprobes performance by adding 'pre-filtering' support, by
     Oleg Nesterov.

   - Make some POWER7 events available in sysfs, equivalent to what was
     done on x86, from Sukadev Bhattiprolu.

   - tracing updates by Steve Rostedt - mostly misc fixes and smaller
     improvements.

   - Use perf/event tracing to report PCI Express advanced errors, by
     Tony Luck.

   - Enable northbridge performance counters on AMD family 15h, by Jacob
     Shin.

   - This tracing commit:

        tracing: Remove the extra 4 bytes of padding in events

     changes the ABI.  All involved parties (PowerTop in particular)
     seem to agree that it's safe to do now with the introduction of
     libtraceevent, but the devil is in the details ...

  Main tooling side changes:

   - Add 'event group view', from Namyung Kim:

     To use it, 'perf record' should group events when recording.  And
     then perf report parses the saved group relation from file header
     and prints them together if --group option is provided.  You can
     use the 'perf evlist' command to see event group information:

        $ perf record -e '{ref-cycles,cycles}' noploop 1
        [ perf record: Woken up 2 times to write data ]
        [ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]

        $ perf evlist --group
        {ref-cycles,cycles}

     With this example, default perf report will show you each event
     separately.

     You can use --group option to enable event group view:

        $ perf report --group
        ...
        # group: {ref-cycles,cycles}
        # ========
        # Samples: 7K of event 'anon group { ref-cycles, cycles }'
        # Event count (approx.): 6876107743
        #
        #         Overhead  Command      Shared Object                      Symbol
        # ................  .......  .................  ..........................
            99.84%  99.76%  noploop  noploop            [.] main
             0.07%   0.00%  noploop  ld-2.15.so         [.] strcmp
             0.03%   0.00%  noploop  [kernel.kallsyms]  [k] timerqueue_del
             0.03%   0.03%  noploop  [kernel.kallsyms]  [k] sched_clock_cpu
             0.02%   0.00%  noploop  [kernel.kallsyms]  [k] account_user_time
             0.01%   0.00%  noploop  [kernel.kallsyms]  [k] __alloc_pages_nodemask
             0.00%   0.00%  noploop  [kernel.kallsyms]  [k] native_write_msr_safe
             0.00%   0.11%  noploop  [kernel.kallsyms]  [k] _raw_spin_lock
             0.00%   0.06%  noploop  [kernel.kallsyms]  [k] find_get_page
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] rcu_check_callbacks
             0.00%   0.02%  noploop  [kernel.kallsyms]  [k] __current_kernel_time

     As you can see the Overhead column now contains both of ref-cycles
     and cycles and header line shows group information also - 'anon
     group { ref-cycles, cycles }'.  The output is sorted by period of
     group leader first.

   - Initial GTK+ annotate browser, from Namhyung Kim.

   - Add option for runtime switching perf data file in perf report,
     just press 's' and a menu with the valid files found in the current
     directory will be presented, from Feng Tang.

   - Add support to display whole group data for raw columns, from Jiri
     Olsa.

   - Add per processor socket count aggregation in perf stat, from
     Stephane Eranian.

   - Add interval printing in 'perf stat', from Stephane Eranian.

   - 'perf test' improvements

   - Add support for wildcards in tracepoint system name, from Jiri
     Olsa.

   - Add anonymous huge page recognition, from Joshua Zhu.

   - perf build-id cache now can show DSOs present in a perf.data file
     that are not in the cache, to integrate with build-id servers being
     put in place by organizations such as Fedora.

   - perf top now shares more of the evsel config/creation routines with
     'record', paving the way for further integration like 'top'
     snapshots, etc.

   - perf top now supports DWARF callchains.

   - Fix mmap limitations on 32-bit, fix from David Miller.

   - 'perf bench numa mem' NUMA performance measurement suite

   - ... and lots of fixes, performance improvements, cleanups and other
     improvements I failed to list - see the shortlog and git log for
     details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
  perf/x86/amd: Enable northbridge performance counters on AMD family 15h
  perf/hwbp: Fix cleanup in case of kzalloc failure
  perf tools: Fix build with bison 2.3 and older.
  perf tools: Limit unwind support to x86 archs
  perf annotate: Make it to be able to skip unannotatable symbols
  perf gtk/annotate: Fail early if it can't annotate
  perf gtk/annotate: Show source lines with gray color
  perf gtk/annotate: Support multiple event annotation
  perf ui/gtk: Implement basic GTK2 annotation browser
  perf annotate: Fix warning message on a missing vmlinux
  perf buildid-cache: Add --update option
  uprobes/perf: Avoid uprobe_apply() whenever possible
  uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
  uprobes/perf: Teach trace_uprobe/perf code to pre-filter
  uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
  uprobes: Introduce uprobe_apply()
  perf: Introduce hw_perf_event->tp_target and ->tp_list
  uprobes/perf: Always increment trace_uprobe->nhit
  uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
  uprobes/tracing: Introduce is_trace_uprobe_enabled()
  ...
2013-02-19 17:49:41 -08:00
Bjorn Helgaas
018ba0a6ef Merge branch 'pci/yinghai-root-bus-hotplug' into next
* pci/yinghai-root-bus-hotplug:
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
2013-02-19 11:42:17 -07:00
Yinghai Lu
181380b702 PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12)
contents and associated each _PRT entry with a PCI bus number.  The bus
number association means dependencies on PCI device enumeration and bus
number assignment, as well as on the PCI/ACPI binding process.

After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"),
these dependencies caused the IRQ issues reported by Peter:

    pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
    pci 0000:00:1e.0: can't derive routing for PCI INT A
    snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5
    irq 18: nobody cared (try booting with the "irqpoll" option)

This patch removes _PRT caching.  Instead, we evaluate _PRT as needed
in the pci_enable_device() path.  This also removes the dependency on
PCI bus numbers: we can simply look at the _PRT associated with each
bridge as we walk upstream toward the root.

[bhelgaas: changelog]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561
Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-16 11:58:34 -07:00
Bjorn Helgaas
fd5e20bcb4 Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
2013-02-15 17:44:19 -07:00
Linus Torvalds
db1b2d323f PCI update for v3.8:
Hotplug
     PCI/PM: Clean up PME state when removing a device
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRHAFuAAoJEPGMOI97Hn6z8WsQAIEmcIbwzCtMuoDnK82v9qhf
 wdbFPGCgi/m3+ilZt75nn/W2vVdHr4w8W2Lscn1aWkfgLH2JAStlfmx7tM/jGovM
 PGcqAdr5gSx/sz5GiBDtQNmw1g/JdSetfPeSDoA4gzFjuy1Gh1IEyGqLnBmrV39h
 OHPUVuRLv2W8I5pSzYqj+FvvD5IIdQ92fwb3zjo9Cia6jBhjU7gQaPuDhKe1XaP5
 Npj0ku+0fdxNqIejSks2cSky6nE/P2bTj9Ijql+Rqs96bB88k5oItK0UqomINuD4
 X/LLC/aFEWhDtKsks0xauHfAMAGz+g7akmRfq3WbK8Y1AD91QZip1lT6/K/4Ej0O
 1AYlvZ6NuKgGVwgp7bO1EDar+/NMvq2/2DlGupyqPbQw2ujtp9JhQwflnyfKN2P8
 c3npWeaC4Sa4vmWyp6NA1sgonH3aywvYIOOI1yO5QqYvglcoWhJ112bBiwQWGiPI
 bmFp4OEbNSauc6g1AIojlcER8aaxRd5LvaF8uyBICFzG6kIfDhvLBdbOI21w8GAL
 TnJ046SAkQ6oWRpnF+lGodnlPxEiQH0vubyuBt80CMfPLCyXFmBthQvcx4K9Q3ya
 VHRBQsFWdBkzFUCKdj5guAoj38j6muEotQEjyYG5eDeParSgmDTgaWsaRwx3jon2
 K0KazWHdI6G5ZVDhjkyu
 =zdXb
 -----END PGP SIGNATURE-----

Merge tag '3.8-pci-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "This is another fix for v3.8.  It fixes an oops that happens when a
  Thunderbolt adapter is unplugged (remove device, poll for PME events
  on no-longer-existing device, oops)."

* tag '3.8-pci-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PM: Clean up PME state when removing a device
2013-02-15 12:04:08 -08:00
Alex Williamson
969daa349f PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
PCI_EXP_FLAGS_TYPE is a mask, not an offset.  Fix it.

Previously, pcie_capability_read_word(..., PCI_EXP_FLAGS, ...) would
fail.

[bhelgaas:  tweak changelog]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.7+
2013-02-15 11:46:24 -07:00
Sebastian Ott
53923354d6 s390/pci: fix hotplug module init
Loading the pci hotplug module when no devices are present will fail
but unfortunately some hotplug callbacks stay registered to the pci
bus level. Fix this by not letting module loading fail when no pci
devices are present and provide proper {de}registration functions
for these callbacks.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:17 +01:00
Heiko Carstens
1e5635d10d s390/pci: rename pci_probe to s390_pci_probe
pci_probe is too generic and has a name clash with other common code parts.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-14 15:55:12 +01:00
Rafael J. Wysocki
249bfb83cf PCI/PM: Clean up PME state when removing a device
Devices are added to pci_pme_list when drivers use pci_enable_wake()
or pci_wake_from_d3(), but they aren't removed from the list unless
the driver explicitly disables wakeup.  Many drivers never disable
wakeup, so their devices remain on the list even after they are
removed, e.g., via hotplug.  A subsequent PME poll will oops when
it tries to touch the device.

This patch disables PME# on a device before removing it, which removes
the device from pci_pme_list.  This is safe even if the device never
had PME# enabled.

This oops can be triggered by unplugging a Thunderbolt ethernet adapter
on a Macbook Pro, as reported by Daniel below.

[bhelgaas: changelog]
Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.com
Reported-and-tested-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
2013-02-13 11:58:02 -07:00
Rafael J. Wysocki
3757b94802 ACPI / hotplug: Fix concurrency issues and memory leaks
This changeset is aimed at fixing a few different but related
problems in the ACPI hotplug infrastructure.

First of all, since notify handlers may be run in parallel with
acpi_bus_scan(), acpi_bus_trim() and acpi_bus_hot_remove_device()
and some of them are installed for ACPI handles that have no struct
acpi_device objects attached (i.e. before those objects are created),
those notify handlers have to take acpi_scan_lock to prevent races
from taking place (e.g. a struct acpi_device is found to be present
for the given ACPI handle, but right after that it is removed by
acpi_bus_trim() running in parallel to the given notify handler).
Moreover, since some of them call acpi_bus_scan() and
acpi_bus_trim(), this leads to the conclusion that acpi_scan_lock
should be acquired by the callers of these two funtions rather by
these functions themselves.

For these reasons, make all notify handlers that can handle device
addition and eject events take acpi_scan_lock and remove the
acpi_scan_lock locking from acpi_bus_scan() and acpi_bus_trim().
Accordingly, update all of their users to make sure that they
are always called under acpi_scan_lock.

Furthermore, since eject operations are carried out asynchronously
with respect to the notify events that trigger them, with the help
of acpi_bus_hot_remove_device(), even if notify handlers take the
ACPI scan lock, it still is possible that, for example,
acpi_bus_trim() will run between acpi_bus_hot_remove_device() and
the notify handler that scheduled its execution and that
acpi_bus_trim() will remove the device node passed to
acpi_bus_hot_remove_device() for ejection.  In that case, the struct
acpi_device object obtained by acpi_bus_hot_remove_device() will be
invalid and not-so-funny things will ensue.  To protect agaist that,
make the users of acpi_bus_hot_remove_device() run get_device() on
ACPI device node objects that are about to be passed to it and make
acpi_bus_hot_remove_device() run put_device() on them and check if
their ACPI handles are not NULL (make acpi_device_unregister() clear
the device nodes' ACPI handles for that check to work).

Finally, observe that acpi_os_hotplug_execute() actually can fail,
in which case its caller ought to free memory allocated for the
context object to prevent leaks from happening.  It also needs to
run put_device() on the device node that it ran get_device() on
previously in that case.  Modify the code accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-02-13 14:36:47 +01:00
Bjorn Helgaas
20f24208f6 Merge branch 'pci/konstantin-runtime-pm' into next
* pci/konstantin-runtime-pm:
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
2013-02-12 13:42:36 -07:00
Rafael J. Wysocki
82fee4d67a PCI/PM: Clear state_saved during suspend
This patch clears pci_dev->state_saved at the beginning of suspending.
PCI config state may be saved long before that.  Some drivers call
pci_save_state() from the ->probe() callback to get snapshot of sane
configuration space to use in the ->slot_reset() callback.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> # add comment
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-11 17:40:27 -07:00
Bjorn Helgaas
cc7ba39bab PCI: Use atomic_inc_return() rather than atomic_add_return()
No functional change; just use atomic_inc_return() rather than the
general-purpose atomic_add_return().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-11 17:25:06 -07:00
Konstantin Khlebnikov
fd6dceab01 PCI: Catch attempts to disable already-disabled devices
Warn when disabling a device that has already been disabled.

[bhelgaas: message wording]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-11 17:25:04 -07:00
Konstantin Khlebnikov
7897e60227 PCI: Disable Bus Master unconditionally in pci_device_shutdown()
Commit b566a22c23 ("PCI: disable Bus Master on PCI device shutdown")
used pci_disable_device(), but that doesn't disable Bus Mastering
unconditionally; we allow nested enable/disable calls, and only the
last disable call actually does anything.

This uses pci_clear_master() to unconditionally clear the Bus Master
bit.

Matthew Garrett and Alan Cox said (see LKML link below) that clearing Bus
Master for all PCI devices may lead to unpredictable consequences: some
devices ignores this bit and continue DMA, some of them hang after that or
crash the whole system.  But we're already trying to clear Bus Master in
general because of b566a22c23; this merely deals with the cases where
drivers haven't shut down the device correctly.

[bhelgaas: changelog]
Link: https://lkml.org/lkml/2012/6/6/278
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-11 16:28:50 -07:00
Bjorn Helgaas
f2dfcde4cc Merge branch 'pci/misc' into next
* pci/misc:
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Kill pci_is_reassigndev()
2013-02-02 14:35:57 -07:00
Bjorn Helgaas
ecb87e6609 Merge branch 'pci/joe-aspm' into next
* pci/joe-aspm:
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
2013-02-02 14:34:19 -07:00
Bjorn Helgaas
8e5de3dcc6 Merge branch 'pci/yinghai-root-bus-hotplug' into next
* pci/yinghai-root-bus-hotplug:
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
2013-02-02 14:30:42 -07:00
Jiang Liu
be6d2867b4 PCI: acpiphp: Remove dead code for PCI host bridge hotplug
Commit 668192b678 "PCI: acpiphp: Move host bridge hotplug
to pci_root.c" has moved PCI host bridge hotplug logic from acpiphp
to pci_root, but there is still PCI host bridge hotplug related
dead code left in acpiphp. So remove those dead code.

Now companion ACPI devices are always created before corresponding
PCI devices. And the ACPI event handle_hotplug_event_bridge() will be
installed only if it has associated PCI device. So remove dead code to
handle bridge hot-adding in function handle_hotplug_event_bridge().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-02 14:28:02 -07:00
Jiang Liu
2ca344e8c7 PCI: acpiphp: Create companion ACPI devices before creating PCI devices
With commit 4f535093cf "PCI: Put pci_dev in device tree as
early as possible", companion ACPI devices should be created before
creating corresponding PCI devices, otherwise it will break the ACPI
PCI binding logic.

Without this patch, the /sys/bus/pci/devices/.../firmware_node symlink
is missing after hot-removing and hot-adding a device with acpiphp.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-01 16:07:51 -07:00
Yijing Wang
40064acf0c PCI: Remove unused "rc" in virtfn_add_bus()
Delete unused variable "rc" to fix build warning in drivers/pci/iov.c

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-01 16:00:16 -07:00
Paul Bolle
775c739e0b PCI: pciehp: Drop suspend/resume ENTRY messages
In each suspend and resume cycle my laptop prints these messages at
KERN_INFO level:
    pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
    pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY

and
    pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
    pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY

Drop these messages, that were probably used to debug the suspend and
resume code, but now serve no purpose.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-01 15:56:05 -07:00
Joe Lawrence
a26d5ecb32 PCI/ASPM: Don't touch ASPM if forcibly disabled
Don't allocate and track PCIe ASPM state when "pcie_aspm=off" is specified
on the kernel command line.

Based-on-patch-from: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: David Bulkow <david.bulkow@stratus.com>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
2013-02-01 15:28:19 -07:00
Myron Stowe
84fb913c43 PCI/ASPM: Deallocate upstream link state even if device is not PCIe
On PCI bus hotplug removal, pcie_aspm_exit_link_state() can potentially
skip parent devices that have link_state allocated.  Instead of exiting
early if a given device is not PCIe, check whether or not the device's
parent has link_state allocated.  This enables pcie_aspm_exit_link_state()
to properly clean up parent link_state when the last function in a slot
might not be PCIe.

Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-02-01 15:18:19 -07:00
Myron Stowe
1c531d82ee PCI: Use PCI Express Capability accessor
Use PCI Express Capability access functions to simplify device
Capabilities Register usages.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-30 21:24:39 -07:00
Rafael J. Wysocki
64e94e7e0f Merge branch 'acpi-scan' into acpi-cleanup
The following commits depend on the 'acpi-scan' material.
2013-01-29 13:58:34 +01:00
Rafael J. Wysocki
8a78cf70fa Merge branch 'acpi-pm' into acpi-cleanup
The following commits depend on the 'acpi-pm' material.
2013-01-29 13:56:05 +01:00
Bjorn Helgaas
939de1d69c Merge branch 'pci/yinghai-root-bus-hotplug' into next
* pci/yinghai-root-bus-hotplug:
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  PCI/ACPI: Print info if host bridge notify handler installation fails
  PCI: acpiphp: Move host bridge hotplug to pci_root.c
  PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()
  PCI: Make device create/destroy logic symmetric
  PCI: Fix reference count leak in pci_dev_present()
  PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locally
  PCI: Add root bus children dev's res to fail list
  PCI: acpiphp: Add is_hotplug_bridge detection

Conflicts:
	drivers/pci/pci.h
2013-01-26 17:35:58 -07:00
Bjorn Helgaas
fb455792d9 Merge branch 'pci/acpi-scan2' into next
* pci/acpi-scan2:
  ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead
  ACPI: update ej_event interface to take acpi_device
  ACPI / scan: Add second pass to acpi_bus_trim()
  ACPI / scan: Change the implementation of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_device_unregister()
  ACPI: Remove the ops field from struct acpi_device
  ACPI: remove unused acpi_op_bind and acpi_op_unbind
  ACPI / scan: Fix check of device_attach() return value.
2013-01-26 17:35:05 -07:00
Bjorn Helgaas
14b5cb37cc Merge branch 'pci/yijing-ari' into next
* pci/yijing-ari:
  PCI: shpchp: Iterate over all devices in slot, not functions 0-7
  PCI: sgihp: Iterate over all devices in slot, not functions 0-7
  PCI: cpcihp: Iterate over all devices in slot, not functions 0-7
  PCI: pciehp: Iterate over all devices in slot, not functions 0-7
  PCI: Consolidate "next-function" functions
  PCI: Rename pci_enable_ari() to pci_configure_ari()
  PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
2013-01-26 17:27:36 -07:00
Rafael J. Wysocki
cc38e51913 Merge branch 'acpi-scan' into acpi-cleanup
The following commits depend on the 'acpi-scan' material.
2013-01-26 00:36:44 +01:00
Rafael J. Wysocki
bfee26dba0 ACPI / scan: Make it clear that acpi_bus_trim() cannot fail
Since acpi_bus_trim() cannot fail, change its definition to a void
function, so that its callers don't check the return value in vain
and update the callers.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2013-01-26 00:27:44 +01:00
Yinghai Lu
4f535093cf PCI: Put pci_dev in device tree as early as possible
We want to put pci_dev structs in the device tree as soon as possible so
for_each_pci_dev() iteration will not miss them, but driver attachment
needs to be delayed until after pci_assign_unassigned_resources() to make
sure all devices have resources assigned first.

This patch moves device registering from pci_bus_add_devices() to
pci_device_add(), which happens earlier, leaving driver attachment in
pci_bus_add_devices().

It also removes unattached child bus handling in pci_bus_add_devices().
That's not needed because child bus via pci_add_new_bus() is already
in parent bus children list.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 16:22:37 -07:00
Yinghai Lu
58d9a38f6f PCI: Skip attaching driver in device_add()
We want to add PCI devices to the device tree as early as possible but
delay attaching drivers.

device_add() adds a device to the device hierarchy and (via
device_attach()) attaches a matching driver and calls its .probe() method.
We want to separate adding the device to the hierarchy from attaching the
driver.

This patch does that by adding "match_driver" in struct pci_dev.  When
false, we return failure from pci_bus_match(), which makes device_attach()
believe there's no matching driver.

Later, we set "match_driver = true" and call device_attach() again, which
now attaches the driver and calls its .probe() method.

[bhelgaas: changelog, explicitly init dev->match_driver,
fold device_attach() call into pci_bus_add_device()]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 15:10:12 -07:00
Yinghai Lu
d59f53bc9b PCI: acpiphp: Keep driver loaded even if no slots found
Could have root bus hot-added later and there may be slots that need
acpiphp.

The result returned by acpiphp_get_num_slots() is meaningless, because
the bridge the slots are under may be added after this function has been
called, so drop acpiphp_get_num_slots() and the code using it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 14:53:48 -07:00
Yinghai Lu
668192b678 PCI: acpiphp: Move host bridge hotplug to pci_root.c
The acpiphp driver is confusing because it contains partial support for PCI
host bridge hotplug as well as support for hotplug of PCI devices.

This patch moves the host bridge hot-add support to pci_root.c and adds
hot-remove support in pci_root.c.

How to test it: if sci_emu patch is applied, find out root bus number to
ACPI root name mapping from dmesg or /sys.  To remove root bus:

  echo "\_SB.PCIB 3" > /sys/kernel/debug/acpi/sci_notify

To add back root bus:

  echo "\_SB.PCIB 1" > /sys/kernel/debug/acpi/sci_notify

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 14:50:36 -07:00
Yinghai Lu
92d8aff3a3 PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()
Will need to use it for PCI root bridge hotplug support, so rename
*acpiphp* to *acpi* and move to osc.c.  Also make kacpi_hotplug_wq static
after that.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
2013-01-25 14:43:22 -07:00
Jiang Liu
e723f0b4f4 PCI: Make device create/destroy logic symmetric
According to device model documentation, the way to create/destroy PCI
devices should be symmetric.  The rule is to either use
  1) device_register()/device_unregister()
or
  2) device_initialize()/device_add()/device_del()/put_device().

So change PCI core logic to follow the rule and get rid of the redundant
pci_dev_get()/pci_dev_put() pair.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 14:42:06 -07:00
Jiang Liu
d5af7d987a PCI: Fix reference count leak in pci_dev_present()
Function pci_get_dev_by_id() takes a reference on the pci_dev returned, so
pci_dev_present() should release the corresponding reference.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 13:49:27 -07:00
Yinghai Lu
7629d19a4d PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locally
Otherwise irq_desc for PCI bridge with hot-added IOAPIC may not be
allocated on the local node.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 13:45:04 -07:00
Yinghai Lu
a3cb999dcf PCI: Add root bus children dev's res to fail list
We can stop trying according to try_number now and do not need to use
root_bus checking as stop sign.

In extreme case we could need to reallocate resource for device just
under root bus.  For PCI root bus hot-add, we need to retry to assign
resources to PCI devices just under pci root bus.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 13:45:00 -07:00
Yinghai Lu
1f96a965e3 PCI: acpiphp: Add is_hotplug_bridge detection
When system support hotplug bridge with children hotplug slots, we need
to make sure that parent bridge get preallocated resource so later when
device is plugged into children slot, those children devices will get
resource allocated.

We do not meet this problem, because for PCIe hotplug card, when acpiphp
is used, pci_scan_bridge will set that for us when detect hotplug bit in
slot cap.

Reported-and-tested-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-25 11:30:47 -07:00
Bjorn Helgaas
a2766602ac Merge branch 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into pci/acpi-scan2
* 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead
  ACPI: update ej_event interface to take acpi_device
  ACPI / scan: Add second pass to acpi_bus_trim()
  ACPI / scan: Change the implementation of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_bus_trim()
  ACPI / scan: Drop the second argument of acpi_device_unregister()
  ACPI: Remove the ops field from struct acpi_device
  ACPI: remove unused acpi_op_bind and acpi_op_unbind
  ACPI / scan: Fix check of device_attach() return value.
2013-01-25 11:26:36 -07:00
Yijing Wang
fcbed0bcb2 PCI: shpchp: Iterate over all devices in slot, not functions 0-7
Iterate through devices in a slot by using the upstream bridge's
"bus->devices" list instead of assuming they are functions 0-7.  It's
possible there are several slots on the same pci_bus, so restrict it to
only devices matching this slot's device number.

ARI (which allows functions 0-255) is a PCIe-only feature, and this is
a PCI hotplug driver, so we shouldn't find anything other than functions
0-7, but it's better to iterate the same way as other hotplug drivers.

[bhelgaas: changelog, check PCI_SLOT, fix shpchp_unconfigure_device()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-25 09:23:08 -07:00
Yijing Wang
ab6380ef01 PCI: sgihp: Iterate over all devices in slot, not functions 0-7
Iterate through devices in a slot by using the upstream bridge's
"bus->devices" list instead of assuming they are functions 0-7.  It's
possible there are several slots on the same pci_bus, so restrict it to
only devices matching this slot's device number.

ARI (which allows functions 0-255) is a PCIe-only feature, and this is
a PCI hotplug driver, so we shouldn't find anything other than functions
0-7, but it's better to iterate the same way as other hotplug drivers.

[bhelgaas: changelog, check PCI_SLOT, fix disable_slot()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-25 09:23:08 -07:00
Yijing Wang
05b1250048 PCI: cpcihp: Iterate over all devices in slot, not functions 0-7
Iterate through devices in a slot by using the upstream bridge's
"bus->devices" list instead of assuming they are functions 0-7.  It's
possible there are several slots on the same pci_bus, so restrict it to
only devices matching this slot's device number.

ARI (which allows functions 0-255) is a PCIe-only feature, and this is
a PCI hotplug driver, so we shouldn't find anything other than functions
0-7, but it's better to iterate the same way as other hotplug drivers.

[bhelgaas: changelog, check PCI_SLOT, fix cpci_unconfigure_slot()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-25 09:23:08 -07:00