This fixes a wrong check for same cr_principal in same_creds
Introduced by 8fbba96e5b "nfsd4: stricter
cred comparison for setclientid/exchange_id".
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't need to keep openowners around in the >=4.1 case, because they
aren't needed to handle CLOSE replays any more (that's a problem for
sessions). And doing so causes unexpected failures on a subsequent
destroy_clientid to fail.
We probably also need something comparable for lock owners on last
unlock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Share a little common logic. And note the comments here are a little
out of date (e.g. we don't always create new state in the "new" case any
more.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 5661, the TEST_STATEID operation is not allowed to
return NFS4ERR_STALE_STATEID. In addition, RFC 5661 says:
15.1.16.5. NFS4ERR_STALE_STATEID (Error Code 10023)
A stateid generated by an earlier server instance was used. This
error is moot in NFSv4.1 because all operations that take a stateid
MUST be preceded by the SEQUENCE operation, and the earlier server
instance is detected by the session infrastructure that supports
SEQUENCE.
I triggered NFS4ERR_STALE_STATEID while testing the Linux client's
NOGRACE recovery. Bruce suggested an additional test that could be
useful to client developers.
Lastly, RFC 5661, section 18.48.3 has this:
o Special stateids are always considered invalid (they result in the
error code NFS4ERR_BAD_STATEID).
An explicit check is made for those state IDs to avoid printk noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Initiate a CB probe when a new connection with the correct direction is added
to a session (IFF backchannel is marked as down). Without this a
BIND_CONN_TO_SESSION has no effect on the internal backchannel state, which
causes the server to reply to every SEQUENCE op with the
SEQ4_STATUS_CB_PATH_DOWN flag set until DESTROY_SESSION.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Most frequent symptom was a BUG triggering in expire_client, with the
server locking up shortly thereafter.
Introduced by 508dc6e110 "nfsd41:
free_session/free_client must be called under the client_lock".
Cc: stable@kernel.org
Cc: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull the rest of the nfsd commits from Bruce Fields:
"... and then I cherry-picked the remainder of the patches from the
head of my previous branch"
This is the rest of the original nfsd branch, rebased without the
delegation stuff that I thought really needed to be redone.
I don't like rebasing things like this in general, but in this situation
this was the lesser of two evils.
* 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits)
nfsd4: fix, consolidate client_has_state
nfsd4: don't remove rebooted client record until confirmation
nfsd4: remove some dprintk's and a comment
nfsd4: return "real" sequence id in confirmed case
nfsd4: fix exchange_id to return confirm flag
nfsd4: clarify that renewing expired client is a bug
nfsd4: simpler ordering of setclientid_confirm checks
nfsd4: setclientid: remove pointless assignment
nfsd4: fix error return in non-matching-creds case
nfsd4: fix setclientid_confirm same_cred check
nfsd4: merge 3 setclientid cases to 2
nfsd4: pull out common code from setclientid cases
nfsd4: merge last two setclientid cases
nfsd4: setclientid/confirm comment cleanup
nfsd4: setclientid remove unnecessary terms from a logical expression
nfsd4: move rq_flavor into svc_cred
nfsd4: stricter cred comparison for setclientid/exchange_id
nfsd4: move principal name into svc_cred
nfsd4: allow removing clients not holding state
nfsd4: rearrange exchange_id logic to simplify
...
Pull nfsd update from Bruce Fields.
* 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linux: (23 commits)
nfsd: trivial: use SEEK_SET instead of 0 in vfs_llseek
SUNRPC: split upcall function to extract reusable parts
nfsd: allocate id-to-name and name-to-id caches in per-net operations.
nfsd: make name-to-id cache allocated per network namespace context
nfsd: make id-to-name cache allocated per network namespace context
nfsd: pass network context to idmap init/exit functions
nfsd: allocate export and expkey caches in per-net operations.
nfsd: make expkey cache allocated per network namespace context
nfsd: make export cache allocated per network namespace context
nfsd: pass pointer to export cache down to stack wherever possible.
nfsd: pass network context to export caches init/shutdown routines
Lockd: pass network namespace to creation and destruction routines
NFSd: remove hard-coded dereferences to name-to-id and id-to-name caches
nfsd: pass pointer to expkey cache down to stack wherever possible.
nfsd: use hash table from cache detail in nfsd export seq ops
nfsd: pass svc_export_cache pointer as private data to "exports" seq file ops
nfsd: use exp_put() for svc_export_cache put
nfsd: use cache detail pointer from svc_export structure on cache put
nfsd: add link to owner cache detail to svc_export structure
nfsd: use passed cache_detail pointer expkey_parse()
...
Whoops: first, I reimplemented the already-existing has_resources
without noticing; second, I got the test backwards. I did pick a better
name, though. Combine the two....
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4.1 client-reboot case we're currently removing the client's
previous state in exchange_id. That's wrong--we should be waiting till
the confirming create_session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The comment is redundant, and if we really want dprintk's here they'd
probably be better in the common (check-slot_seqid) code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client should ignore the returned sequence_id in the case where the
CONFIRMED flag is set on an exchange_id reply--and in the unconfirmed
case "1" is always the right response. So it shouldn't actually matter
what we return here.
We could continue returning 1 just to catch clients ignoring the spec
here, but I'd rather be generous. Other things equal, returning the
existing sequence_id seems more informative.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Otherwise nfsd4_set_ex_flags writes over the return flags.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This can't happen:
- cl_time is zeroed only by unhash_client_locked, which is only
ever called under both the state lock and the client lock.
- every caller of renew_client() should have looked up a
(non-expired) client and then called renew_client() all
without dropping the state lock.
- the only other caller of renew_client_locked() is
release_session_client(), which first checks under the
client_lock that the cl_time is nonzero.
So make it clear that this is a bug, not something we handle. I can't
quite bring myself to make this a BUG(), though, as there are a lot of
renew_client() callers, and returning here is probably safer than a
BUG().
We'll consider making it a BUG() after some more cleanup.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cases here divide into two main categories:
- if there's an uncomfirmed record with a matching verifier,
then this is a "normal", succesful case: we're either creating
a new client, or updating an existing one.
- otherwise, this is a weird case: a replay, or a server reboot.
Reordering to reflect that makes the code a bit more concise and the
logic a lot easier to understand.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note CLID_INUSE is for the case where two clients are trying to use the
same client-provided long-form client identifiers. But what we're
looking at here is the server-returned shorthand client id--if those
clash there's a bug somewhere.
Fix the error return, pull the check out into common code, and do the
check unconditionally in all cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
New clients are created only by nfsd4_setclientid(), which always gives
any new client a unique clientid. The only exception is in the
"callback update" case, in which case it may create an unconfirmed
client with the same clientid as a confirmed client. In that case it
also checks that the confirmed client has the same credential.
Therefore, it is pointless for setclientid_confirm to check whether a
confirmed and unconfirmed client with the same clientid have matching
credentials--they're guaranteed to.
Instead, it should be checking whether the credential on the
setclientid_confirm matches either of those. Otherwise, it could be
anyone sending the setclientid_confirm. Granted, I can't see why anyone
would, but still it's probalby safer to check.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The typical setclientid or exchange_id will probably be performed with a
credential that maps to either root or nobody, so comparing just uid's
is unlikely to be useful. So, use everything else we can get our hands
on.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 5661 actually says we should allow an exchange_id to remove a
matching client, even if the exchange_id comes from a different
principal, *if* the victim client lacks any state.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Following rfc 5661 section 2.4.1, we can permit a 4.1 client to remove
an established 4.0 client's state.
(But we don't allow updates.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We mustn't allow a client to destroy another client with established
state unless it has the right credential.
And some minor cleanup.
(Note: our comparison of credentials is actually pretty bogus currently;
that will need to be fixed in another patch.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Handle the st_deny_bmap in a similar fashion to the st_access_bmap. Add
accessor functions and use those instead of bare bitops.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, we do this for the most part with "bare" bitops, but
eventually we'll need to expand the share mode code to handle access
and deny modes on other nodes.
In order to facilitate that code in the future, move to some generic
accessor functions. For now, these are mostly static inlines, but
eventually we'll want to move these to "real" functions that are
able to handle multi-node configurations or have a way to "swap in"
new operations to be done in lieu of or in conjunction with these
atomic bitops.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All of the callers treat the return that way already.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These functions are identical. Also, rename them to bmap_to_share_mode
to better reflect what they do, and have them just return the result
instead of passing in a pointer to the storage location.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC 3530bis, the only items SETCLIENTID_CONFIRM processing
should be concerned with is the clientid, clientid verifier, and
principal. The client's IP address is not supposed to be interesting.
And, NFS4ERR_CLID_INUSE is meant only for principal mismatches.
I triggered this logic with a prototype UCS client -- one that
uses the same nfs_client_id4 string for all servers. The client
mounted our server via its IPv4, then via its IPv6 address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd_open() already returns an NFS error value; only vfs_test_lock()
result needs to be fed through nfserrno(). Broken by commit 55ef12
(nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT)
three years ago...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's possible that lockd or another lock manager might still be on the
list after we call nfsd4_end_grace. If the laundromat thread runs
again at that point, then we could end up calling nfsd4_end_grace more
than once.
That's not only inefficient, but calling nfsd4_recdir_purge_old more
than once could be problematic. Fix this by adding a new global
"grace_ended" flag and use that to determine whether we've already
called nfsd4_grace_end.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Abstract out the mechanism that we use to track clients into a set of
client name tracking functions.
This gives us a mechanism to plug in a new set of client tracking
functions without disturbing the callers. It also gives us a way to
decide on what tracking scheme to use at runtime.
For now, this just looks like pointless abstraction, but later we'll
add a new alternate scheme for tracking clients on stable storage.
Note too that this patch anticipates the eventual containerization
of this code by passing in struct net pointers in places. No attempt
is made to containerize the legacy client tracker however.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We'll need a way to flag the nfs4_client as already being recorded on
stable storage so that we don't continually upcall. Currently, that's
recorded in the cl_firststate field of the client struct. Using an
entire u32 to store a flag is rather wasteful though.
The cl_cb_flags field is only using 2 bits right now, so repurpose that
to a generic flags field. Rename NFSD4_CLIENT_KILL to
NFSD4_CLIENT_CB_KILL to make it evident that it's part of the callback
flags. Add a mask that we can use for existing checks that look to see
whether any flags are set, so that the new flags don't interfere.
Convert all references to cl_firstate to the NFSD4_CLIENT_STABLE flag,
and add a new NFSD4_CLIENT_RECLAIM_COMPLETE flag.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up due to code review.
The nfs4_verifier's data field is not guaranteed to be u32-aligned.
Casting an array of chars to a u32 * is considered generally
hazardous.
We can fix most of this by using a __be32 array to generate the
verifier's contents and then byte-copying it into the verifier field.
However, there is one spot where there is a backwards compatibility
constraint: the do_nfsd_create() call expects a verifier which is
32-bit aligned. Fix this spot by forcing the alignment of the create
verifier in the nfsd4_open args structure.
Also, sizeof(nfs4_verifer) is the size of the in-core verifier data
structure, but NFS4_VERIFIER_SIZE is the number of octets in an XDR'd
verifier. The two are not interchangeable, even if they happen to
have the same value.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
