Commit a2471684da ("crypto: ecdsa - Move X9.62 signature size
calculation into template") introduced ->max_size() and ->digest_size()
callbacks to struct sig_alg. They return an algorithm's maximum
signature size and digest size, respectively.
For algorithms which lack these callbacks, crypto_register_sig() was
amended to use the ->key_size() callback instead.
However the commit neglected to also amend sig_register_instance().
As a result, the ->max_size() and ->digest_size() callbacks remain NULL
pointers if instances do not define them. A KEYCTL_PKEY_QUERY system
call results in an oops for such instances:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
software_key_query+0x169/0x370
query_asymmetric_key+0x67/0x90
keyctl_pkey_query+0x86/0x120
__do_sys_keyctl+0x428/0x480
do_syscall_64+0x4b/0x110
The only instances affected by this are "pkcs1(rsa, ...)".
Fix by moving the callback checks from crypto_register_sig() to
sig_prepare_alg(), which is also invoked by sig_register_instance().
Change the return type of sig_prepare_alg() from void to int to be able
to return errors. This matches other algorithm types, see e.g.
aead_prepare_alg() or ahash_prepare_alg().
Fixes: a2471684da ("crypto: ecdsa - Move X9.62 signature size calculation into template")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crc32c-pcl-intel-asm_64.S has a loop with 1 to 127 iterations fully
unrolled and uses a jump table to jump into the correct location. This
optimization is misguided, as it bloats the binary code size and
introduces an indirect call. x86_64 CPUs can predict loops well, so it
is fine to just use a loop instead. Loop bookkeeping instructions can
compete with the crc instructions for the ALUs, but this is easily
mitigated by unrolling the loop by a smaller amount, such as 4 times.
Therefore, re-roll the loop and make related tweaks to the code.
This reduces the binary code size of crc_pclmul() from 4546 bytes to 418
bytes, a 91% reduction. In general it also makes the code faster, with
some large improvements seen when retpoline is enabled.
More detailed performance results are shown below. They are given as
percent improvement in throughput (negative means regressed) for CPU
microarchitecture vs. input length in bytes. E.g. an improvement from
40 GB/s to 50 GB/s would be listed as 25%.
Table 1: Results with retpoline enabled (the default):
| 512 | 833 | 1024 | 2000 | 3173 | 4096 |
---------------------+-------+-------+-------+------ +-------+-------+
Intel Haswell | 35.0% | 20.7% | 17.8% | 9.7% | -0.2% | 4.4% |
Intel Emerald Rapids | 66.8% | 45.2% | 36.3% | 19.3% | 0.0% | 5.4% |
AMD Zen 2 | 29.5% | 17.2% | 13.5% | 8.6% | -0.5% | 2.8% |
Table 2: Results with retpoline disabled:
| 512 | 833 | 1024 | 2000 | 3173 | 4096 |
---------------------+-------+-------+-------+------ +-------+-------+
Intel Haswell | 3.3% | 4.8% | 4.5% | 0.9% | -2.9% | 0.3% |
Intel Emerald Rapids | 7.5% | 6.4% | 5.2% | 2.3% | -0.0% | 0.6% |
AMD Zen 2 | 11.8% | 1.4% | 0.2% | 1.3% | -0.9% | -0.2% |
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix crc32c-pcl-intel-asm_64.S to access 32-bit arguments as 32-bit
values instead of 64-bit, since the upper bits of the corresponding
64-bit registers are not guaranteed to be zero. Also update the type of
the length argument to be unsigned int rather than int, as the assembly
code treats it as unsigned.
Note: there haven't been any reports of this bug actually causing
incorrect behavior. Neither gcc nor clang guarantee zero-extension to
64 bits, but zero-extension is likely to happen in practice because most
instructions that operate on 32-bit registers zero-extend to 64 bits.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The assembly code in crc32c-pcl-intel-asm_64.S is invoked only for
lengths >= 512, due to the overhead of saving and restoring FPU state.
Therefore, it is unnecessary for this code to be excessively "optimized"
for lengths < 200. Eliminate the excessive unrolling of this part of
the code and use a more straightforward qword-at-a-time loop.
Note: the part of the code in question is not entirely redundant, as it
is still used to process any remainder mod 24, as well as any remaining
data when fewer than 200 bytes remain after least one 3072-byte chunk.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allows removing some gotos and simplifying remove a bit.
Tested Cisco MX60W.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no use for the resource struct. Just use
devm_platform_ioremap_resource to simplify the code.
Avoids the need to iounmap manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Removes separate steps. Requires index instead of name.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is unnecessary as the irqs are devm managed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoids manual frees. Also simplifiies the code with _optional
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Jitter RNG time delta is computed based on the difference of two
high-resolution, 64-bit time stamps. However, the test interface added
in 69f1c387ba only outputs the lower 32 bits of those time stamps. To
ensure all information is available during the evaluation process of
the Jitter RNG, output the full 64-bit time stamps.
Any clients collecting data from the test interface will need to be
updated to take this change into account.
Additionally, the size of the temporary buffer that holds the data for
user space has been clarified. Previously, this buffer was
JENT_TEST_RINGBUFFER_SIZE (= 1000) bytes in size, however that value
represents the number of samples held in the kernel space ring buffer,
with each sample taking 8 (previously 4) bytes.
Rather than increasing the size to allow for all 1000 samples to be
output, we keep it at 1000 bytes, but clarify that this means at most
125 64-bit samples will be output every time this interface is called.
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On imx31.dtsi the rng compatible string contains "fsl,imx31-rnga" only.
Adjust the binding to accept passing "fsl,imx31-rnga" only.
This fixes the following dt-schema warning:
imx31-lite.dtb: rng@53fb0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx31-rnga'] is too short
'fsl,imx21-rnga' was expected
'fsl,imx25-rngb' was expected
'fsl,imx31-rnga' is not one of ['fsl,imx6sl-rngb', 'fsl,imx6sll-rngb', 'fsl,imx6ull-rngb']
'fsl,imx35-rngc' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The format specifier of "unsigned int" in sprintf() should be "%u", not
"%d".
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/crypto to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Resetting the service arbiter config can cause potential issues
related to response ordering and ring flow control check in the
event of AER or device hang. This is because it results in changing
the default response ring size from 32 bytes to 16 bytes. The service
arbiter config reset also disables response ring flow control check.
Thus, by removing this reset we can prevent the service arbiter from
being configured inappropriately, which leads to undesired device
behaviour in the event of errors.
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephen reports a documentation build warning for "make htmldocs"
introduced by recent commit 6b34562f0c ("crypto: akcipher - Drop
sign/verify operations").
The commit renamed a paragraph title in a header file, but neglected to
amend the title reference in the API documentation. Fix it.
Fixes: 6b34562f0c ("crypto: akcipher - Drop sign/verify operations")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241008172926.0b995ea7@canb.auug.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit e2d60e2f59 ("crypto: x86/cast5 - drop CTR mode implementation")
removed the calls to cast5_ctr_16way but left the avx implementation.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure that the inline function contains no more than 10 lines.
move q_num_set() from hisi_acc_qm.h to qm.c.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
adf_devmgr_get_first has been unused since commit
4a4b0bad06 ("crypto: qat - fix crypto_get_instance_node function")
Remove it.
(Build tested only, I don't own the hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fw_objs[] array has "num_objs" elements so the > needs to be >= to
prevent an out of bounds read.
Fixes: 10484c647a ("crypto: qat - refactor fw config logic for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is called from uof_get_name_420xx() where "num_objs" is the
ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of
bounds access.
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since I'll be retiring from Intel and will no longer have access to
hardware, Kristen Accardi will be taking over as the iaa_crypto
maintainer.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For iaa_crypto operations, it's assumed that if an operation doesn't
make progress, the IAA watchdog timer will kick in and set the
completion status bit to failure and the reason to completion timeout.
Some systems may have broken hardware that doesn't even do that, which
can result in an infinite status-checking loop. Add a check for that
in the loop, and disable the driver if it occurs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch is to fix an issue when simd is not usable that data mismatch
may occur. The fix is to register algs as SIMD modules so that the
algorithm is excecuted when SIMD instructions is usable. Called
gcm_update() to generate the final digest if needed.
A new module rfc4106(gcm(aes)) is also added.
Fixes: cdcecfd999 ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Re-write AES/GCM assembly codes with smaller footprints and
small performance gain. Handling the partial blocks differently that
computes partial block to AES states and re-assembles to a complete
block and then computes a full-block hash.
Added gcm_update() to update the last partial block hash value and
generate the final digest.
Fixes: fd0e9b3e2e ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a buggy driver returns a length that is longer than the size
of the buffer provided to it, then this may lead to a buffer overread
in the caller.
Stop this by adding a check for it in the hwrng core.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Broadcom Broadband Access (BCA) SoC:s include the
iproc r200 hwrng so enable it to be selected for these
platforms.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs functions are guaranteed to return a valid error code
instead of NULL upon failure. Consequently, the driver can directly
propagate any error returned without additional checks.
Remove the unnecessary `if` statement after debugfs_create_dir(). If
this function fails, the error code is stored in accel_dev->debugfs_dir
and utilized in subsequent debugfs calls.
Additionally, since accel_dev->debugfs_dir is assured to be non-NULL,
remove the superfluous NULL pointer checks within the adf_dbgfs_add()
and adf_dbgfs_rm().
Fixes: 9260db6640 ("crypto: qat - move dbgfs init to separate file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'ctrldev' and 'qidev' are the same.
Remove the former to slightly simplify the code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type of the last parameter given to devm_add_action_or_reset() is
"struct caam_drv_private *", but in caam_qi_shutdown(), it is casted to
"struct device *".
Pass the correct parameter to devm_add_action_or_reset() so that the
resources are released as expected.
Fixes: f414de2e2f ("crypto: caam - use devres to de-initialize QI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the driver enables clock gating for only one cluster.
However, the new hardware has three clusters. Therefore, clock
gating needs to be enabled based on the number of clusters on the
current hardware.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "err" variable may be returned without an initialized value.
Fixes: 8e3a67f2de ("crypto: lib/mpi - Add error checks to extension")
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix passing an initialization vector in the payload field which
is necessary for AES in CBC mode even with hardware-bound keys.
Fixes: 3d16af0b4c ("crypto: mxs-dcp: Add support for hardware-bound keys")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function meson_crypto_probe, devm_platform_ioremap_resource()
have already contains error message, so remove the
redundant assignment and error messages.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
software_key_query() returns the curve size as maximum signature size
for ecrdsa. However it should return twice as much.
It's only the maximum signature size that seems to be off. The maximum
digest size is likewise set to the curve size, but that's correct as it
matches the checks in ecrdsa_set_pub_key() and ecrdsa_verify().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Alternatively to the X9.62 encoding of ecdsa signatures, which uses
ASN.1 and is already supported by the kernel, there's another common
encoding called P1363. It stores r and s as the concatenation of two
big endian, unsigned integers. The name originates from IEEE P1363.
Add a P1363 template in support of the forthcoming SPDM library
(Security Protocol and Data Model) for PCI device authentication.
P1363 is prescribed by SPDM 1.2.1 margin no 44:
"For ECDSA signatures, excluding SM2, in SPDM, the signature shall be
the concatenation of r and s. The size of r shall be the size of
the selected curve. Likewise, the size of s shall be the size of
the selected curve. See BaseAsymAlgo in NEGOTIATE_ALGORITHMS for
the size of r and s. The byte order for r and s shall be in big
endian order. When placing ECDSA signatures into an SPDM signature
field, r shall come first followed by s."
Link: https://www.dmtf.org/sites/default/files/standards/documents/DSP0274_1.2.1.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
software_key_query() returns the maximum signature and digest size for a
given key to user space. When it only supported RSA keys, calculating
those sizes was trivial as they were always equivalent to the key size.
However when ECDSA was added, the function grew somewhat complicated
calculations which take the ASN.1 encoding and curve into account.
This doesn't scale well and adjusting the calculations is easily
forgotten when adding support for new encodings or curves. In fact,
when NIST P521 support was recently added, the function was initially
not amended:
https://lore.kernel.org/all/b749d5ee-c3b8-4cbd-b252-7773e4536e07@linux.ibm.com/
Introduce a ->max_size() callback to struct sig_alg and take advantage
of it to move the signature size calculations to ecdsa-x962.c.
Introduce a ->digest_size() callback to struct sig_alg and move the
maximum ECDSA digest size to ecdsa.c. It is common across ecdsa-x962.c
and the upcoming ecdsa-p1363.c and thus inherited by both of them.
For all other algorithms, continue using the key size as maximum
signature and digest size.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_sig_maxsize() is a bit of a misnomer as it doesn't return the
maximum signature size, but rather the key size.
Rename it as well as all implementations of the ->max_size callback.
A subsequent commit introduces a crypto_sig_maxsize() function which
returns the actual maximum signature size.
While at it, change the return type of crypto_sig_keysize() from int to
unsigned int for consistency with crypto_akcipher_maxsize(). None of
the callers checks for a negative return value and an error condition
can always be indicated by returning zero.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike the rsa driver, which separates signature decoding and
signature verification into two steps, the ecdsa driver does both in one.
This restricts users to the one signature format currently supported
(X9.62) and prevents addition of others such as P1363, which is needed
by the forthcoming SPDM library (Security Protocol and Data Model) for
PCI device authentication.
Per Herbert's suggestion, change ecdsa to use a "raw" signature encoding
and then implement X9.62 and P1363 as templates which convert their
respective encodings to the raw one. One may then specify
"x962(ecdsa-nist-XXX)" or "p1363(ecdsa-nist-XXX)" to pick the encoding.
The present commit moves X9.62 decoding to a template. A separate
commit is going to introduce another template for P1363 decoding.
The ecdsa driver internally represents a signature as two u64 arrays of
size ECC_MAX_BYTES. This appears to be the most natural choice for the
raw format as it can directly be used for verification without having to
further decode signature data or copy it around.
Repurpose all the existing test vectors for "x962(ecdsa-nist-XXX)" and
create a duplicate of them to test the raw encoding.
Link: https://lore.kernel.org/all/ZoHXyGwRzVvYkcTP@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When extracting a signature component r or s from an ASN.1-encoded
integer, ecdsa_get_signature_rs() subtracts the expected length
"bufsize" from the ASN.1 length "vlen" (both of unsigned type size_t)
and stores the result in "diff" (of signed type ssize_t).
This results in a signed integer overflow if vlen > SSIZE_MAX + bufsize.
The kernel is compiled with -fno-strict-overflow, which implies -fwrapv,
meaning signed integer overflow is not undefined behavior. And the
function does check for overflow:
if (-diff >= bufsize)
return -EINVAL;
So the code is fine in principle but not very obvious. In the future it
might trigger a false-positive with CONFIG_UBSAN_SIGNED_WRAP=y.
Avoid by comparing the two unsigned variables directly and erroring out
if "vlen" is too large.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If <linux/asn1_decoder.h> is the first header included from a .c file
(due to headers being sorted alphabetically), the compiler complains:
include/linux/asn1_decoder.h:18:29: error: unknown type name 'size_t'
Avoid by including <linux/types.h>.
Jonathan notes that the counterpart <linux/asn1_encoder.h> already
includes <linux/types.h>, but additionally includes the unnecessary
<linux/bug.h>. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto_sig_*() API calls lived in sig.c so far because they needed
access to struct crypto_sig_type: This was necessary to differentiate
between signature algorithms that had already been migrated from
crypto_akcipher to crypto_sig and those that hadn't yet.
Now that all algorithms have been migrated, the API calls can become
static inlines in <crypto/sig.h> to mimic what <crypto/akcipher.h> is
doing.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A sig_alg backend has just been introduced and all asymmetric
sign/verify algorithms have been migrated to it.
The sign/verify operations can thus be dropped from akcipher_alg.
It is now purely for asymmetric encrypt/decrypt.
Move struct crypto_akcipher_sync_data from internal.h to akcipher.c and
unexport crypto_akcipher_sync_{prep,post}(): They're no longer used by
sig.c but only locally in akcipher.c.
In crypto_akcipher_sync_{prep,post}(), drop various NULL pointer checks
for data->dst as they were only necessary for the verify operation.
In the crypto_sig_*() API calls, remove the forks that were necessary
while algorithms were converted from crypto_akcipher to crypto_sig
one by one.
In struct akcipher_testvec, remove the "params", "param_len" and "algo"
elements as they were only needed for the ecrdsa verify operation.
Remove corresponding dead code from test_akcipher_one() as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The drivers aspeed-acry.c, hpre_crypto.c and jh7110-rsa.c purport to
implement sign/verify operations for raw (unpadded) "rsa".
But there is no such thing as message digests generally need to be
padded according to a predefined scheme (such as PSS or PKCS#1) to
match the size of the usually much larger RSA keys.
The bogus sign/verify operations defined by these drivers are never
called but block removal of sign/verify from akcipher_alg. Drop them.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The virtio crypto driver exposes akcipher sign/verify operations in a
user space ABI. This blocks removal of sign/verify from akcipher_alg.
Herbert opines:
"I would say that this is something that we can break. Breaking it
is no different to running virtio on a host that does not support
these algorithms. After all, a software implementation must always
be present.
I deliberately left akcipher out of crypto_user because the API
is still in flux. We should not let virtio constrain ourselves."
https://lore.kernel.org/all/ZtqoNAgcnXnrYhZZ@gondor.apana.org.au/
"I would remove virtio akcipher support in its entirety. This API
was never meant to be exposed outside of the kernel."
https://lore.kernel.org/all/Ztqql_gqgZiMW8zz@gondor.apana.org.au/
Drop sign/verify support from virtio crypto. There's no strong reason
to also remove encrypt/decrypt support, so keep it.
A key selling point of virtio crypto is to allow guest access to crypto
accelerators on the host. So far the only akcipher algorithm supported
by virtio crypto is RSA. Dropping sign/verify merely means that the
PKCS#1 padding is now always generated or verified inside the guest,
but the actual signature generation/verification (which is an RSA
decrypt/encrypt operation) may still use an accelerator on the host.
Generating or verifying the PKCS#1 padding is cheap, so a hardware
accelerator won't be of much help there. Which begs the question
whether virtio crypto support for sign/verify makes sense at all.
It would make sense for the sign operation if the host has a security
chip to store asymmetric private keys. But the kernel doesn't even
have an asymmetric_key_subtype yet for hardware-based private keys.
There's at least one rudimentary driver for such chips (atmel-ecc.c for
ATECC508A), but it doesn't implement the sign operation. The kernel
would first have to grow support for a hardware asymmetric_key_subtype
and at least one driver implementing the sign operation before exposure
to guests via virtio makes sense.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When constructing the EMSA-PKCS1-v1_5 padding for the sign operation,
a buffer for the padding is allocated and the Full Hash Prefix is copied
into it. The padding is then passed to the RSA decrypt operation as an
sglist entry which is succeeded by a second sglist entry for the hash.
Actually copying the hash prefix around is completely unnecessary.
It can simply be referenced from a third sglist entry which sits
in-between the padding and the digest.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
