Integrate the regulator framework to the PSE framework for enhanced
access to features such as voltage, power measurement, and limits, which
are akin to regulators. Additionally, PSE features like port priorities
could potentially enhance the regulator framework. Note that this
integration introduces some implementation complexity, including wrapper
callbacks, but the potential benefits make it worthwhile.
Regulator are using enable counter with specific behavior.
Two calls to regulator_disable will trigger kernel warnings.
If the counter exceeds one, regulator_disable call won't disable the
PSE PI. These behavior isn't suitable for PSE control.
Added a boolean 'enabled' state to prevent multiple calls to
regulator_enable/disable. These calls will only be called from PSE
framework as it won't have any regulator children, therefore no mutex are
needed to safeguards this boolean.
regulator_get needs the consumer device pointer. Use PSE as regulator
provider and consumer device until we have RJ45 ports represented in
the Kernel.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-10-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement setup_pi_matrix callback to configure the PSE PI matrix. This
functionality is invoked before registering the PSE and following the core
parsing of the pse_pis devicetree subnode.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-9-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
that collectively manage power delivery to one Ethernet port.
Such configurations might support a range of PoE standards and require
the capability to dynamically configure power delivery based on the
operational mode (e.g., PoE2 versus PoE4) or specific requirements of
connected devices. In these instances, a dedicated PSE PI node becomes
essential for accurately documenting the system architecture. This node
would serve to detail the interactions between different PSE controllers,
the support for various PoE modes, and any additional logic required to
coordinate power delivery across the network infrastructure.
The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
index information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-8-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.
This patch adds support for getting the PSE controller node through PSE PI
device subnode.
This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-7-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As I add support for PoE in PSE networking subsystem it seems legitimate
to be added to the maintainers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-6-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove podl from the attribute prefix to prepare the support of PoE pse
netlink spec.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-4-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce an enumeration to define PSE types (C33 or PoDL),
utilizing a bitfield for potential future support of both types.
Include 'pse_get_types' helper for external access to PSE type info.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-2-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current PSE interface for Ethernet Power Equipment, support is
limited to PoDL. This patch extends the interface to accommodate the
objects specified in IEEE 802.3-2022 145.2 for Power sourcing
Equipment (PSE).
The following objects are now supported and considered mandatory:
- IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus
- IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
- IEEE 802.3-2022 30.9.1.2.1 aPSEAdminControl
To avoid confusion between "PoDL PSE" and "PoE PSE", which have similar
names but distinct values, we have followed the suggestion of Oleksij
Rempel and Andrew Lunn to maintain separate naming schemes for each,
using c33 (clause 33) prefix for "PoE PSE".
You can find more details in the discussion threads here:
https://lore.kernel.org/netdev/20230912110637.GI780075@pengutronix.de/https://lore.kernel.org/netdev/2539b109-72ad-470a-9dae-9f53de4f64ec@lunn.ch/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-1-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)
This series contains updates to ice driver only.
Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.
Dariusz removes unnecessary implementation of ndo_get_phys_port_name.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Remove ndo_get_phys_port_name
ice: Add automatic VF reset on Tx MDD events
====================
Link: https://lore.kernel.org/r/20240417165634.2081793-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144413.104257-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144407.104241-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144359.104225-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the check for unsupported control flags, to use the new helper
flow_rule_is_supp_control_flags().
Since the helper was based on sfc, then nothing really changes.
Compile-tested, and compiled objects are identical.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240417140712.100905-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240417135131.99921-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test cases need to exit with non-zero status if they failed,
we currently don't do that:
# KTAP version 1
# 1..3
# # At /root/ksft-net-drv/drivers/net/./ping.py line 18:
# # Check failed 1 != 2
# not ok 1 ping.test_v4
# ok 2 ping.test_v6
# ok 3 ping.test_tcp
# # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
^^^^
It's a bit tempting to make the exit part of ksft_run(),
but that only works well for very trivial setups. We can
revisit this later, if people forget to call ksft_exit().
Link: https://lore.kernel.org/r/20240417231146.2435572-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Totals currently only pay attention to exceptions, if check fails
(say ksft_eq()) the test case will be counted as pass:
# At /ksft/drivers/net/./ping.py line 18:
# Check failed 1 != 2
not ok 1 ping.test_v4
ok 2 ping.test_v6
ok 3 ping.test_tcp
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
^^^^^^^^^^^^^
Pay attention to the result.
Fixes: b86761ff63 ("selftests: net: add scaffolding for Netlink tests in Python")
Link: https://lore.kernel.org/r/20240417231146.2435572-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance
for coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sJzH
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the commit d2689b6a86 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AK8k
-----END PGP SIGNATURE-----
Merge tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- The input subsystem contributes entropy in some places where a
spinlock is held, but the entropy accounting code only handled
callers being in an interrupt or non-atomic process context, but not
atomic process context. We fix this by removing an optimization and
just calling queue_work() unconditionally.
- Greg accidently sent up a patch not intended for his tree and that
had been nack'd, so that's now reverted.
* tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
Revert "vmgenid: emit uevent when VMGENID updates"
random: handle creditable entropy from atomic process context
Changes:
- amd/pmf: Add SPS notifications quirk (+ quirk support)
- amd/pmf: Lower Smart PC check message severity
- x86/ISST: New HW support
- x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message
- amd/pmc: New BIOS version still needs Spurious IRQ1 quirk
The following is an automated shortlog grouped by driver:
amd/pmc:
- Extend Framework 13 quirk to more BIOSes
amd: pmf:
- Add infrastructure for quirking supported funcs
- Add quirk for ROG Zephyrus G14
- Decrease error message to debug
intel-uncore-freq:
- Increase minor number support
ISST:
- Add Granite Rapids-D to HPM CPU list
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZiDjnQAKCRBZrE9hU+XO
MZcwAQCH8SPWXBkff5LChI0p32ebKbWIAGmHW9V9Khp0krWuRQEA30RroBW4+GTI
3vMpHZlAe3uIIR0ITdUIig4RNc9b7w8=
=5d9s
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf: Add SPS notifications quirk (+ quirk support)
- amd/pmf: Lower Smart PC check message severity
- x86/ISST: New HW support
- x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message
- amd/pmc: New BIOS version still needs Spurious IRQ1 quirk
* tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
platform/x86/intel-uncore-freq: Increase minor number support
platform/x86: ISST: Add Granite Rapids-D to HPM CPU list
platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
platform/x86/amd: pmf: Add infrastructure for quirking supported funcs
platform/x86/amd: pmf: Decrease error message to debug
This reverts commit ad6bcdad2b. I had
nak'd it, and Greg said on the thread that it links that he wasn't going
to take it either, especially since it's not his code or his tree, but
then, seemingly accidentally, it got pushed up some months later, in
what looks like a mistake, with no further discussion in the linked
thread. So revert it, since it's clearly not intended.
Fixes: ad6bcdad2b ("vmgenid: emit uevent when VMGENID updates")
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.es
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The RSS hash report is a feature that's part of the virtio specification.
Currently, virtio backends like qemu, vdpa (mlx5), and potentially vhost
(still a work in progress as per [1]) support this feature. While the
capability to obtain the RSS hash has been enabled in the normal path,
it's currently missing in the XDP path. Therefore, we are introducing
XDP hints through kfuncs to allow XDP programs to access the RSS hash.
1.
https://lore.kernel.org/all/20231015141644.260646-1-akihiko.odaki@daynix.com/#r
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240417071822.27831-1-liangchen.linux@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=R1+V
-----END PGP SIGNATURE-----
Merge tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 amends a missing spot where the set iterator type is unset.
This is fixing a issue in the previous pull request.
Patch #2 fixes the delete set command abort path by restoring state
of the elements. Reverse logic for the activate (abort) case
otherwise element state is not restored, this requires to move
the check for active/inactive elements to the set iterator
callback. From the deactivate path, toggle the next generation
bit and from the activate (abort) path, clear the next generation
bitmask.
Patch #3 skips elements already restored by delete set command from the
abort path in case there is a previous delete element command in
the batch. Check for the next generation bit just like it is done
via set iteration to restore maps.
netfilter pull request 24-04-18
* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
====================
Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alex Elder says:
====================
net: ipa: header hygiene
The end result of this series is that the list of files included in
every IPA source file will be maintained in sorted order. This
imposes some consistency that was previously not possible.
If an IPA header file requires a symbol or type declared in another
header, that other header must be included. E.g., if bool or u32
type is used in a function declaration in an IPA header file, the
IPA header must include <linux/types.h>.
If a type used is just a struct or union *pointer* or enum type (and
no members within these types are needed), then these types only need
to be *declared* within the header that uses it.
This is sufficient, but in addition, this series removes includes of
files that aren't necessary, as well as unneeded type declarations.
====================
Link: https://lore.kernel.org/r/20240416231018.389520-1-elder@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Establish the rule that header files are always included in sorted
(POSIX local) order. Standard and private headers are separated by
a blank line.
Similarly, sort all forward-declarations for structures.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All of the config data files and all of the register definition
files (plus a few others) use GSI_EE_AP, which is defined in
"ipa_version.h". Include that header where it's needed.
All of the IPA register definition files include "../ipa.h", though
none of them need anything defined there. Similarly, all of the GSI
register definition files include "../gsi.h", but don't need anything
defined there. Remove these unnneded includes.
All of the configuration data files include "../gsi.h", though none
of them need anything defined there, so remove these includes.
Remove other includes of local header files that are not required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As definitions in headers have been moved around, some of the
struct and enum declarations found in header files have become
no longer necessary and can be removed. Remove these unneeded
declarations.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Declare some structure types in a few header files where functions
declared therein use them:
- Functions are declared in "gsi_private.h" that use gsi, gsi_ring, and
gsi_trans structure pointers.
- A gsi_trans struct pointer is passed to two functions
declared in "ipa_endpoint.h"
- In "ipa_interrupt.h", a platform_device pointer is passed in the
declaration for ipa_interrupt_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IPA structure contains an ipa_interrupt structure pointer, and
that structure is declared in "ipa.h". There is no need to include
"ipa_interrupt.h" in that header file.
Instead, include "ipa_interrupt.h" in the three source files (in
addition to "ipa_main.c") that actually use the functions that are
declared there.
Similarly, three files use symbols defined in "ipa_reg.h" but do not
include that file; include it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files include one or more other standard header
files despite not directly needing anything defined in the included
files. Remove these unnecessary includes.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files use types defined in <linux/types.h>, but do
not include that file:
- In "ipa_mem.h", the ipa_mem structure has u16 and u32 fields
- In "ipa_power.h", ipa_power_retention() takes a bool argument,
and ipa_core_clock_rate() returns u32
- In "ipa_version.h", ipa_version_supported() returns bool
Include it in these files to satisfy their dependencies.
The ipa_qmi structure (defined in "ipa_qmi.h") contains a work
structure, so include <linux/workqueue.h> in there.
All of the data and register definition files, as well as "reg.h",
use the ARRAY_SIZE() macro. Include <linux/array_size.h> everywhere
it's used.
Similarly, all register definition files (and a few others) use the
GENMASK() macro, so include <linux/bits.h> to ensure it's defined
where used. BIT() becomes available by including this file also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ibmvnic_xmit() if ibmvnic_tx_scrq_flush() returns H_CLOSED then
it will inform upper level networking functions to disable tx
queues. H_CLOSED signals that the connection with the vnic server is
down and a transport event is expected to recover the device.
Previously, ibmvnic_tx_scrq_flush() was hard-coded to return success.
Therefore, the queues would remain active until ibmvnic_cleanup() is
called within do_reset().
The problem is that do_reset() depends on the RTNL lock. If several
ibmvnic devices are resetting then there can be a long wait time until
the last device can grab the lock. During this time the tx/rx queues
still appear active to upper level functions.
FYI, we do make a call to netif_carrier_off() outside the RTNL lock but
its calls to dev_deactivate() are also dependent on the RTNL lock.
As a result, large amounts of retransmissions were observed in a short
period of time, eventually leading to ETIMEOUT. This was specifically
seen with HNV devices, likely because of even more RTNL dependencies.
Therefore, ensure the return code of ibmvnic_tx_scrq_flush() is
propagated to the xmit function to allow for an earlier (and lock-less)
response to a transport event.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416164128.387920-1-nnac123@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Inter-process communication on localhost should be established successfully
even the ARP table is full, many processes on server machine use the
localhost to communicate such as command-line interface (CLI),
servers hope all CLI commands can be executed successfully even the arp
table is full. Right now CLI commands got timeout when the arp table is
full. Set the parameter of exempt_from_gc to be true for LOOPBACK net
device to keep localhost neigh in arp table, not removed by gc.
the steps of reproduced:
server with "gc_thresh3 = 1024" setting, ping server from more than 1024
same netmask Lan IPv4 addresses, run "ssh localhost" on console interface,
then the command will get timeout.
Signed-off-by: Zheng Li <James.Z.Li@Dell.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416095343.540-1-lizheng043@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paul Barker says:
====================
ravb Ethernet driver bugfixes
These patches fix bugs found during recent work on the ravb driver.
Patches 1 & 2 affect the R-Car code paths so have been tested on an
R-Car M3N Salvator-XS board - this is the only R-Car board I currently
have access to.
Patches 2, 3 & 4 affect the GbEth code paths so have been tested on
RZ/G2L and RZ/G2UL SMARC EVK boards.
Changes v2->v3:
* Incorporate feedback from Niklas and add Reviewed-by tag to patch
"net: ravb: Count packets instead of descriptors in R-Car RX path".
Changes v1->v2:
* Fixed typos in commit message of patch
"net: ravb: Allow RX loop to move past DMA mapping errors".
* Added Sergey's Reviewed-by tags.
* Expanded Cc list as Patchwork complained that I had missed people.
* Trimmed the call trace in accordance with the docs [1] in patch
"net: ravb: Fix GbEth jumbo packet RX checksum handling".
[1]: https://docs.kernel.org/process/submitting-patches.html#backtraces-in-commit-messages
====================
Link: https://lore.kernel.org/r/20240416120254.2620-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.
To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().
Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.
Fixes: 5a5a3e564d ("ravb: Fix potential use-after-free in ravb_rx_gbeth()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:
WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
pc : skb_trim+0x30/0x38
lr : ravb_rx_csum_gbeth+0x40/0x90
Call trace:
skb_trim+0x30/0x38
ravb_rx_gbeth+0x56c/0x5cc
ravb_poll+0xa0/0x204
__napi_poll+0x38/0x17c
This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.
Fixes: c2da940857 ("ravb: Add Rx checksum offload support for GbEth")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.
As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.
To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.
Fixes: d8b48911fd ("ravb: fix ring memory allocation")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The units of "work done" in the RX path should be packets instead of
descriptors.
Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.
Also make the limit variable unsigned as it can never be negative.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.
Fixes: f78cd9c783 ("net: ethernet: mtk_wed: update mtk_wed_stop")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-16 (ice)
This series contains updates to ice driver only.
Michal fixes a couple of issues with TC filter parsing; always add match
for src_vsi and remove flag check that could prevent addition of valid
filters.
Marcin adds additional checks for unsupported flower filters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
====================
Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apparently it's more legal to pass the format as NULL, than
it is to use an empty string. Clang complains about empty
formats:
./../kselftest_harness.h:1207:30: warning: format string is empty
[-Wformat-zero-length]
1207 | diagnostic ? "%s" : "", diagnostic);
| ^~
1 warning generated.
Reported-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com
Fixes: 378193eff3 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic")
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP_METRICS_CMD_GET and TCP_METRICS_CMD_DEL use their
own locking (tcp_metrics_lock and RCU),
they do not need genl_mutex protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416162025.1251547-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change tcp_metrics_nl_dump() to return 0 at the end
of a dump so that NLMSG_DONE can be appended
to the current skb, saving one recvmsg() system call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416161112.1199265-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
