Commit Graph

1200080 Commits

Author SHA1 Message Date
Keith Busch
b718ae835b nvme: warn only once for legacy uuid attribute
Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.

Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-07-12 08:48:19 -07:00
Karol Herbst
c177872cb0 drm/nouveau/disp/g94: enable HDMI
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a3 ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630160645.3984596-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>
2023-07-12 17:37:06 +02:00
Karol Herbst
d943036999 drm/nouveau/disp: fix HDMI on gt215+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Fixes: f530bc60a3 ("drm/nouveau/disp: move HDMI config into acquire + infoframe methods")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628212248.3798605-1-kherbst@redhat.com
Signed-off-by: Karol Herbst <kherbst@redhat.com>
2023-07-12 17:37:06 +02:00
Jisheng Zhang
b690e266da
riscv: mm: fix truncation warning on RV32
lkp reports below sparse warning when building for RV32:
arch/riscv/mm/init.c:1204:48: sparse: warning: cast truncates bits from
constant value (100000000 becomes 0)

IMO, the reason we didn't see this truncates bug in real world is "0"
means MEMBLOCK_ALLOC_ACCESSIBLE in memblock and there's no RV32 HW
with more than 4GB memory.

Fix it anyway to make sparse happy.

Fixes: decf89f86e ("riscv: try to allocate crashkern region from 32bit addressible memory")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306080034.SLiCiOMn-lkp@intel.com/
Link: https://lore.kernel.org/r/20230709171036.1906-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-12 07:44:00 -07:00
Eric Lin
66843b14fb
perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
Since commit 096b52fd2b ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.

However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:

 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 240 at drivers/perf/riscv_pmu.c:184 riscv_pmu_start+0x7c/0x8e
 Modules linked in:
 CPU: 0 PID: 240 Comm: ls Not tainted 6.4-rc4-g19d0788e9ef2 #1
 Hardware name: SiFive (DT)
 epc : riscv_pmu_start+0x7c/0x8e
  ra : riscv_pmu_start+0x28/0x8e
 epc : ffffffff80aef864 ra : ffffffff80aef810 sp : ffff8f80004db6f0
  gp : ffffffff81c83750 tp : ffffaf80069f9bc0 t0 : ffff8f80004db6c0
  t1 : 0000000000000000 t2 : 000000000000001f s0 : ffff8f80004db720
  s1 : ffffaf8008ca1068 a0 : 0000ffffffffffff a1 : 0000000000000000
  a2 : 0000000000000001 a3 : 0000000000000870 a4 : 0000000000000000
  a5 : 0000000000000000 a6 : 0000000000000840 a7 : 0000000000000030
  s2 : 0000000000000000 s3 : ffffaf8005165800 s4 : ffffaf800424da00
  s5 : ffffffffffffffff s6 : ffffffff81cc7590 s7 : 0000000000000000
  s8 : 0000000000000006 s9 : 0000000000000001 s10: ffffaf807efbc340
  s11: ffffaf807efbbf00 t3 : ffffaf8006a16028 t4 : 00000000dbfbb796
  t5 : 0000000700000000 t6 : ffffaf8005269870
 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
 [<ffffffff80aef864>] riscv_pmu_start+0x7c/0x8e
 [<ffffffff80185b56>] perf_adjust_freq_unthr_context+0x15e/0x174
 [<ffffffff80188642>] perf_event_task_tick+0x88/0x9c
 [<ffffffff800626a8>] scheduler_tick+0xfe/0x27c
 [<ffffffff800b5640>] update_process_times+0x9a/0xba
 [<ffffffff800c5bd4>] tick_sched_handle+0x32/0x66
 [<ffffffff800c5e0c>] tick_sched_timer+0x64/0xb0
 [<ffffffff800b5e50>] __hrtimer_run_queues+0x156/0x2f4
 [<ffffffff800b6bdc>] hrtimer_interrupt+0xe2/0x1fe
 [<ffffffff80acc9e8>] riscv_timer_interrupt+0x38/0x42
 [<ffffffff80090a16>] handle_percpu_devid_irq+0x90/0x1d2
 [<ffffffff8008a9f4>] generic_handle_domain_irq+0x28/0x36

After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.

Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.

Signed-off-by: Eric Lin <eric.lin@sifive.com>
Link: https://lore.kernel.org/r/20230710154328.19574-1-eric.lin@sifive.com
Fixes: 096b52fd2b ("perf: RISC-V: throttle perf events")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-12 07:41:23 -07:00
Jonas Gorski
54ccc8758e
mailmap: add entry for Jonas Gorski
The openwrt.org email address is long defunct, but still pop ups from
time to time when asking get_maintainer.pl. So add an entry to my
currently used address.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20230708195309.72767-2-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12 13:11:08 +01:00
Jonas Gorski
2bbc72ffc4
MAINTAINERS: add myself for spi-bcm63xx
I noticed the driver is unclaimed. Since I was the last one doing
substantial work on it, add me as the maintainer.

As it is only found in legacy products, mark it as "Odd Fixes"
instead of "Maintained".

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230708195309.72767-1-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12 13:11:07 +01:00
Jaewon Kim
9ec3c5517e
spi: s3c64xx: clear loopback bit after loopback test
When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
bit still remained. It works as loopback even if the next transfer is
not spi loopback mode.
If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Fixes: ffb7bcd3b2 ("spi: s3c64xx: support loopback mode")
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20230711082020.138165-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12 13:11:06 +01:00
Isaac J. Manjarres
963b54df82
regmap-irq: Fix out-of-bounds access when allocating config buffers
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.

This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.

This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.

Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:

[   14.033877][    T1] ==================================================================
[   14.042507][    T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[   14.050796][    T1] Write of size 8 at addr 06ffff8081021850 by task init/1

[   14.242004][    T1] The buggy address belongs to the object at ffffff8081021850
[   14.242004][    T1]  which belongs to the cache kmalloc-8 of size 8
[   14.255669][    T1] The buggy address is located 0 bytes inside of
[   14.255669][    T1]  8-byte region [ffffff8081021850, ffffff8081021858)

Fixes: faa87ce919 ("regmap-irq: Introduce config registers for irq types")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Closes: https://lore.kernel.org/all/CAMi1Hd04mu6JojT3y6wyN2YeVkPR5R3qnkKJ8iR8if_YByCn4w@mail.gmail.com/
Tested-by: John Stultz <jstultz@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org> # tested on Dragonboard 845c
Cc: stable@vger.kernel.org # v6.0+
Cc: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: "Isaac J. Manjarres" <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20230711193059.2480971-1-isaacmanjarres@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-12 12:05:10 +01:00
Viresh Kumar
bfb5ef2219 cpufreq: sparc: Don't mark cpufreq callbacks with __init
These callbacks can be called again by the cpufreq core after the driver
is initialized and must be kept around. We currently get section
mismatch build warnings.

Don't mark them with __init.

Fixes: dcfce7c2ce ("cpufreq: sparc: Don't allocate cpufreq_driver dynamically")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-12 12:45:18 +02:00
Ido Schimmel
d3f87278bc net/sched: flower: Ensure both minimum and maximum ports are specified
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:

 # tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass

 # tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass

 # tc filter show dev swp1 ingress
 filter protocol ip pref 1 flower chain 0
 filter protocol ip pref 1 flower chain 0 handle 0x1
   eth_type ipv4
   ip_proto udp
   not_in_hw
         action order 1: gact action pass
          random type none pass val 0
          index 1 ref 1 bind 1

 filter protocol ip pref 1 flower chain 0 handle 0x2
   eth_type ipv4
   ip_proto udp
   not_in_hw
         action order 1: gact action pass
          random type none pass val 0
          index 2 ref 1 bind 1

Fix by returning an error unless both ports are specified:

 # tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
 Error: Both min and max source ports must be specified.
 We have an error talking to the kernel

 # tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
 Error: Both min and max destination ports must be specified.
 We have an error talking to the kernel

Fixes: 5c72299fba ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-12 10:33:06 +01:00
David S. Miller
b6c9ebde5a Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
igc: Fix corner cases for TSN offload

Florian Kauer says:

The igc driver supports several different offloading capabilities
relevant in the TSN context. Recent patches in this area introduced
regressions for certain corner cases that are fixed in this series.

Each of the patches (except the first one) addresses a different
regression that can be separately reproduced. Still, they have
overlapping code changes so they should not be separately applied.

Especially #4 and #6 address the same observation,
but both need to be applied to avoid TX hang occurrences in
the scenario described in the patches.
====================

Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-12 10:07:24 +01:00
Andrew Halaney
e522c1bd0a MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
linux-arm-msm is the list most people subscribe to in order to receive
updates about Qualcomm related drivers. Make sure changes for the
Qualcomm ethernet driver make it there.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230710195240.197047-1-ahalaney@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11 20:27:30 -07:00
Jakub Kicinski
cf28792fac docs: netdev: update the URL of the status page
Move the status page from vger to the same server as mailbot.

Link: https://lore.kernel.org/r/20230710174636.1174684-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11 20:27:00 -07:00
Johannes Berg
12a89f0177 wifi: iwlwifi: remove 'use_tfh' config to fix crash
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.

There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.

Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11 20:26:06 -07:00
Larysa Zaremba
2e06c57d66 xdp: use trusted arguments in XDP hints kfuncs
Currently, verifier does not reject XDP programs that pass NULL pointer to
hints functions. At the same time, this case is not handled in any driver
implementation (including veth). For example, changing

bpf_xdp_metadata_rx_timestamp(ctx, &timestamp);

to

bpf_xdp_metadata_rx_timestamp(ctx, NULL);

in xdp_metadata test successfully crashes the system.

Add KF_TRUSTED_ARGS flag to hints kfunc definitions, so driver code
does not have to worry about getting invalid pointers.

Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Reported-by: Stanislav Fomichev <sdf@google.com>
Closes: https://lore.kernel.org/bpf/ZKWo0BbpLfkZHbyE@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230711105930.29170-1-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-11 20:04:50 -07:00
Pu Lehui
4369016497 bpf: cpumap: Fix memory leak in cpu_map_update_elem
Syzkaller reported a memory leak as follows:

BUG: memory leak
unreferenced object 0xff110001198ef748 (size 192):
  comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s)
  hex dump (first 32 bytes):
    00 00 00 00 4a 19 00 00 80 ad e3 e4 fe ff c0 00  ....J...........
    00 b2 d3 0c 01 00 11 ff 28 f5 8e 19 01 00 11 ff  ........(.......
  backtrace:
    [<ffffffffadd28087>] __cpu_map_entry_alloc+0xf7/0xb00
    [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0
    [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520
    [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720
    [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90
    [<ffffffffb029cc80>] do_syscall_64+0x30/0x40
    [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

BUG: memory leak
unreferenced object 0xff110001198ef528 (size 192):
  comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffadd281f0>] __cpu_map_entry_alloc+0x260/0xb00
    [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0
    [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520
    [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720
    [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90
    [<ffffffffb029cc80>] do_syscall_64+0x30/0x40
    [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

BUG: memory leak
unreferenced object 0xff1100010fd93d68 (size 8):
  comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s)
  hex dump (first 8 bytes):
    00 00 00 00 00 00 00 00                          ........
  backtrace:
    [<ffffffffade5db3e>] kvmalloc_node+0x11e/0x170
    [<ffffffffadd28280>] __cpu_map_entry_alloc+0x2f0/0xb00
    [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0
    [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520
    [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720
    [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90
    [<ffffffffb029cc80>] do_syscall_64+0x30/0x40
    [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

In the cpu_map_update_elem flow, when kthread_stop is called before
calling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bit
of kthread has been set by kthread_stop, the threadfn of rcpu->kthread
will never be executed, and rcpu->refcnt will never be 0, which will
lead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot be
released.

Calling kthread_stop before executing kthread's threadfn will return
-EINTR. We can complete the release of memory resources in this state.

Fixes: 6710e11269 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230711115848.2701559-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-11 19:57:03 -07:00
Randy Dunlap
9373771aae wifi: airo: avoid uninitialized warning in airo_get_rate()
Quieten a gcc (11.3.0) build error or warning by checking the function
call status and returning -EBUSY if the function call failed.
This is similar to what several other wireless drivers do for the
SIOCGIWRATE ioctl call when there is a locking problem.

drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized]

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org
Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11 19:22:54 -07:00
Petr Pavlu
5fc5224855 vmlinux.lds.h: Remove a reference to no longer used sections .text..refcount
Sections .text..refcount were previously used to hold an error path code
for fast refcount overflow protection on x86, see commit 7a46ec0e2f
("locking/refcounts, x86/asm: Implement fast refcount overflow
protection") and commit 564c9cc84e ("locking/refcounts, x86/asm: Use
unique .text section for refcount exceptions").

The code was replaced and removed in commit fb041bb7c0
("locking/refcount: Consolidate implementations of refcount_t") and no
sections .text..refcount are present since then.

Remove then a relic referencing these sections from TEXT_TEXT to avoid
confusing people, like me. This is a non-functional change.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20230711125054.9000-1-petr.pavlu@suse.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2023-07-11 14:29:43 -07:00
Chungkai Yang
3a8395b565 PM: QoS: Restore support for default value on frequency QoS
Commit 8d36694245 ("PM: QoS: Add check to make sure CPU freq is
non-negative") makes sure CPU freq is non-negative to avoid negative
value converting to unsigned data type. However, when the value is
PM_QOS_DEFAULT_VALUE, pm_qos_update_target specifically uses
c->default_value which is set to FREQ_QOS_MIN/MAX_DEFAULT_VALUE when
cpufreq_policy_alloc is executed, for this case handling.

Adding check for PM_QOS_DEFAULT_VALUE to let default setting work will
fix this problem.

Fixes: 8d36694245 ("PM: QoS: Add check to make sure CPU freq is non-negative")
Link: https://lore.kernel.org/lkml/20230626035144.19717-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/20230627071727.16646-1-Chung-kai.Yang@mediatek.com/
Link: https://lore.kernel.org/lkml/CAJZ5v0gxNOWhC58PHeUhW_tgf6d1fGJVZ1x91zkDdht11yUv-A@mail.gmail.com/
Signed-off-by: Chungkai Yang <Chung-kai.Yang@mediatek.com>
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-11 20:09:57 +02:00
Azat Khuzhin
c9e4bf607d PM: hibernate: Fix writing maj:min to /sys/power/resume
resume_store() first calls lookup_bdev() and after tries to handle
maj:min, but it does not reset the error before, hence if you will write
maj:min you will get ENOENT:

    # echo 259:2 >| /sys/power/resume
    bash: echo: write error: No such file or directory

This also should fix hiberation via systemd, since it uses this way.

Fixes: 1e8c813b08 ("PM: hibernate: don't use early_lookup_bdev in resume_store")
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-11 19:58:08 +02:00
Palmer Dabbelt
d6e724d3ef
Documentation: RISC-V: hwprobe: Fix a formatting error
I'm not sure what I was trying to do with the ':'s, but they're just
rendered to HTML which looks odd.   This makes "fence.i" look like
"mvendorid" and such, which is seems reasonable to me.

Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230710193329.2742-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-07-11 10:43:51 -07:00
Xin Yin
18bddc5b67 erofs: fix fsdax unavailability for chunk-based regular files
DAX can be used to share page cache between VMs, reducing guest memory
overhead. And chunk based data format is widely used for VM and
container image. So enable dax support for it, make erofs better used
for VM scenarios.

Fixes: c5aa903a59 ("erofs: support reading chunk-based uncompressed files")
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230711062130.7860-1-yinxin.x@bytedance.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-07-12 00:50:56 +08:00
Chunhai Guo
8191213a58 erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
z_erofs_do_read_page() may loop infinitely due to the inappropriate
truncation in the below statement. Since the offset is 64 bits and min_t()
truncates the result to 32 bits. The solution is to replace unsigned int
with a 64-bit type, such as erofs_off_t.
    cur = end - min_t(unsigned int, offset + end - map->m_la, end);

    - For example:
        - offset = 0x400160000
        - end = 0x370
        - map->m_la = 0x160370
        - offset + end - map->m_la = 0x400000000
        - offset + end - map->m_la = 0x00000000 (truncated as unsigned int)
    - Expected result:
        - cur = 0
    - Actual result:
        - cur = 0x370

Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710093410.44071-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-07-12 00:50:43 +08:00
Chunhai Guo
936aa701d8 erofs: avoid useless loops in z_erofs_pcluster_readmore() when reading beyond EOF
z_erofs_pcluster_readmore() may take a long time to loop when the page
offset is large enough, which is unnecessary should be prevented.

For example, when the following case is encountered, it will loop 4691368
times, taking about 27 seconds:
    - offset = 19217289215
    - inode_size = 1442672

Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 386292919c ("erofs: introduce readmore decompression strategy")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710042531.28761-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-07-12 00:50:33 +08:00
Gao Xiang
c5539762f3 erofs: simplify z_erofs_transform_plain()
Use memcpy_to_page() instead of open-coding them.

In addition, add a missing flush_dcache_page() even though almost all
modern architectures clear `PG_dcache_clean` flag for new file cache
pages so that it doesn't change anything in practice.

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230627161240.331-2-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-07-12 00:50:15 +08:00
Gao Xiang
123ec246eb erofs: get rid of the remaining kmap_atomic()
It's unnecessary to use kmap_atomic() compared with kmap_local_page().
In addition, kmap_atomic() is deprecated now.

Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230627161240.331-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-07-12 00:49:39 +08:00
Michael Kelley
f4d1a8e011 scsi: storvsc: Handle SRB status value 0x30
In response to a disk I/O request, Hyper-V has been observed to return SRB
status value 0x30.  This indicates the request was not processed by Hyper-V
because low memory conditions on the host caused an internal error.  The
0x30 status is not recognized by storvsc, so the I/O operation is not
flagged as an error. The request is treated as if it completed normally but
with zero data transferred, causing a flood of retries.

Add a definition for this SRB status value and handle it like other error
statuses from the Hyper-V host.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1688788886-94279-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-11 12:38:49 -04:00
Martin K. Petersen
e96277a570 Merge branch '6.5/scsi-staging' into 6.5/scsi-fixes
Pull in the currently staged SCSI fixes for 6.5.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-11 12:15:15 -04:00
Thomas Zimmermann
27655b9bb9 drm/client: Send hotplug event after registering a client
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.

The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.

If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.

Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.

The bug was originally added in commit 6e3f17ee73 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.

Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26b ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd5 ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe8 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45e ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
2023-07-11 14:02:01 +02:00
Suman Ghosh
8278ee2a26 octeontx2-pf: Add additional check for MCAM rules
Due to hardware limitation, MCAM drop rule with
ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting
such rules.

Fixes: dce677da57 ("octeontx2-pf: Add vlan-etype to ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 12:56:57 +02:00
Thomas GENTY
6b293a8c91 platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
Add info for the Archos 101 Cesium Educ tablet
It was tested using gslx680_ts_acpi module
PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230707141425.21473-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:30 +02:00
Armin Wolf
d0050c2ef5 platform/x86: dell-ddv: Fix mangled list in documentation
Add missing empty line necessary for sphinx to recognize
the list. Also reword the first entry a little bit.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:30 +02:00
Armin Wolf
8c48938375 platform/x86: dell-ddv: Improve error handling
If for some reason a external function returns -ENODEV,
no error message is being displayed because the driver
assumes that -ENODEV can only be returned internally if
no sensors, etc where found.
Fix this by explicitly returning 0 in such a case since
missing hardware is no error. Also remove the now obsolete
check for -ENODEV.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230707010333.12954-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:30 +02:00
Shyam Sundar S K
5d3acd9d7a platform/x86/amd: pmf: Add new ACPI ID AMDI0103
Add new ACPI ID AMDI0103 used by upcoming AMD platform to the PMF
supported list of devices.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100903.384151-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:24 +02:00
Shyam Sundar S K
822507ca6a platform/x86/amd: pmc: Add new ACPI ID AMDI000A
Add new ACPI ID AMDI000A used by upcoming AMD platform to the pmc
supported list of devices

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230711100344.383948-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 12:15:20 +02:00
Mario Limonciello
d194803325 platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming
from s2idle when IOMMU is enabled.  The symptoms very closely resemble
that of the Lenovo issues with NVME resume. Lucienne was released in
a similar timeframe as the Renoir / Cezanne Lenovo laptops and they
may have similar BIOS code.

Applying the same quirk to this system allows the system to work with
IOMMU enabled and s2idle resume to work.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2684
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 11:34:14 +02:00
Mario Limonciello
e8ef8dd28c platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
It turns out that some-non Lenovo systems can benefit from the quirk
introduced for Lenovo systems in commit 455cd867b8 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops").

So move this quirk into running from the amd-pmc driver instead.
No intended functional changes.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230710183934.17315-2-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-11 11:34:14 +02:00
Lu Hongfei
04499f28b4 net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
Remove unnecessary of_node_put from the continue path to prevent
child node from being released twice, which could avoid resource
leak or other unexpected issues.

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: de879a016a ("net: dsa: felix: add functionality when not all ports are supported")
Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:53:14 +02:00
Tvrtko Ursulin
113899c266 drm/i915: Fix one wrong caching mode enum usage
Commit a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch
buffer") mistakenly passed in uapi I915_CACHING_CACHED as argument to
i915_gem_object_set_cache_coherency(), which actually takes internal
enum i915_cache_level.

No functional issue since the value matches I915_CACHE_LLC (1 == 1), which
is the intended caching mode, but lets clean it up nevertheless.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: a4d86249c7 ("drm/i915/gt: Provide a utility to create a scratch buffer")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707125503.3965817-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 49c60b2f08)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:32 +01:00
Tvrtko Ursulin
6bf0961a00 drm/i915: Remove dead code from gen8_pte_encode
Commit 9275277d53 ("drm/i915: use pat_index instead of cache_level")
added a dedicated gen12_pte_encode but forgot to remove the Gen12 specific
bit from gen8_pte_encode.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 9275277d53 ("drm/i915: use pat_index instead of cache_level")
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230707124644.3965281-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 08509377dd)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:28 +01:00
Umesh Nerlige Ramappa
dde4c3d477 drm/i915/perf: Consider OA buffer boundary when zeroing out reports
For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.

v2: Use OA_BUFFER_SIZE (Ashutosh)

Fixes: 09a36015d9 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 40b1588a75)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:25 +01:00
Stanislav Lisovskiy
5c413188c6 drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
If we are using Bigjoiner dpll_hw_state is supposed to be exactly
same as for master crtc, so no need to save it's state for slave crtc.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628141017.18937-1-stanislav.lisovskiy@intel.com
(cherry picked from commit cbaf758809)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2023-07-11 09:21:21 +01:00
Ingo Molnar
535d0ae391 x86/cfi: Only define poison_cfi() if CONFIG_X86_KERNEL_IBT=y
poison_cfi() was introduced in:

  9831c6253a ("x86/cfi: Extend ENDBR sealing to kCFI")

... but it's only ever used under CONFIG_X86_KERNEL_IBT=y,
and if that option is disabled, we get:

  arch/x86/kernel/alternative.c:1243:13: error: ‘poison_cfi’ defined but not used [-Werror=unused-function]

Guard the definition with CONFIG_X86_KERNEL_IBT.

Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2023-07-11 10:17:55 +02:00
Paolo Abeni
c0dbbdf56f Merge branch 'net-fec-fix-some-issues-of-ndo_xdp_xmit'
Wei Fang says:

====================
net: fec: fix some issues of ndo_xdp_xmit()

We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.

step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.

step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500

step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0

After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.
====================

Link: https://lore.kernel.org/r/20230706081012.2278063-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:52 +02:00
Wei Fang
84a1094719 net: fec: use netdev_err_once() instead of netdev_err()
In the case of heavy XDP traffic to be transmitted, the console
will print the error log continuously if there are lack of enough
BDs to accommodate the frames. The log looks like below.

[  160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!

Not only will this log be replicated and redundant, it will also
degrade XDP performance. So we use netdev_err_once() instead of
netdev_err() now.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00
Wei Fang
56b3c6ba53 net: fec: increase the size of tx ring and update tx_wake_threshold
When the XDP feature is enabled and with heavy XDP frames to be
transmitted, there is a considerable probability that available
tx BDs are insufficient. This will lead to some XDP frames to be
discarded and the "NOT enough BD for SG!" error log will appear
in the console (as shown below).

[  160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[  160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!

In the case of heavy XDP traffic, sometimes the speed of recycling
tx BDs may be slower than the speed of sending XDP frames. There
may be several specific reasons, such as the interrupt is not
responsed in time, the efficiency of the NAPI callback function is
too low due to all the queues (tx queues and rx queues) share the
same NAPI, and so on.

After trying various methods, I think that increase the size of tx
BD ring is simple and effective. Maybe the best resolution is that
allocate NAPI for each queue to improve the efficiency of the NAPI
callback, but this change is a bit big and I didn't try this method.
Perheps this method will be implemented in a future patch.

This patch also updates the tx_wake_threshold of tx ring which is
related to the size of tx ring in the previous logic. Otherwise,
the tx_wake_threshold will be too high (403 BDs), which is more
likely to impact the slow path in the case of heavy XDP traffic,
because XDP path and slow path share the tx BD rings. According
to Jakub's suggestion, the tx_wake_threshold is at least equal to
tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of
entries is overflowing, we should be able to apply a hysteresis
of a few tens of entries.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00
Wei Fang
20f7973990 net: fec: recycle pages for transmitted XDP frames
Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.

[  157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[  217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[  278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[  338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[  399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec

Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.

Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00
Wei Fang
be7ecbe7ec net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
When a XDP program is installed or uninstalled, fec_restart() will
be invoked to reset MAC and buffer descriptor rings. It's reasonable
not to transmit any packet during the process of reset. However, the
NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default,
that is to say, it's possible that the fec_enet_xdp_xmit() will be
invoked even if the process of reset is not finished. In this case,
the redirected XDP frames might be dropped and available transmit BDs
may be incorrectly deemed insufficient. So this patch disable the
NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure
this feature when the bpf program is installed or uninstalled.

Fixes: e4ac7cc6e5 ("net: fec: turn on XDP features")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11 10:00:49 +02:00
Maxime Ripard
2f98e686ef Linux 6.5-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmSrHjkeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGyoYH/0hKwgqboNdEilrv
 JYP60ML/53HTXdX4HEmAdhiPZf/AAtMp6AB9rcK1wjV6eBxDu3mdUAH0wt7FCsXZ
 M7zg8Q3raraqcP+wCF+Z6CDXkuOhct+6SYKwZRG7k5BLw/RjdoPSJSRGDR3lKWkV
 GkltoKc3jG7FC0oBF3srYyuaLFwnD7j8OaZugwadnrtqcBAx02ITQPgQcG6Sm1hJ
 G+4jjWVXCGQ0ESrECzhTjIZmESU0YoNOIA2oH1hEhEet1eDNOB9mrw437eRQMMpm
 QdimJ1O72cLuS7hkGSFMo4vUw55RJjNRYq0LxomFUe7yPMQ1m7AGvh1ayXWSId9O
 1KXze0A=
 =w97t
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iHQEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZK0DgQAKCRDj7w1vZxhR
 xVtMAPjszFZJ5dE6K0mLky8ibETJvH5p55q2o2GSE5cHJ+bxAQDLBu/lrWclROyQ
 5uqm/ouGh9yoeizjWjVs+x3+IYURAw==
 =xij2
 -----END PGP SIGNATURE-----

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-07-11 09:23:20 +02:00