Commit Graph

14 Commits

Author SHA1 Message Date
Masahiro Yamada
5f655c7a4c kbuild: include $(src)/Makefile rather than $(obj)/Makefile
This commit actually has no impact because $(src) and $(obj) point
to the same path, but $(src)/Makefile looks better when we include
source files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-02 16:42:08 +02:00
Masahiro Yamada
7aacad53ae kbuild: use relative path to include Makefile
The "MAKEFLAGS += --include-dir=$(srctree)" line in the top Makefile
allows us to do this.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-02 16:42:08 +02:00
Masahiro Yamada
a4954fd772 kbuild: remove obj-n and lib-n handling
Kconfig never defines CONFIG_* as 'n'.
Now obj-n is only used in firmware/Makefile and it can be
replaced with obj-.  No makefile uses lib-n.

Let's rip off obj-n and lib-n.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-10-02 13:55:02 +02:00
Michal Marek
5180d5f483 firmware: Simplify directory creation
When building the firmware blobs, use a simple loop to create
directories in $(objtree), like in Makefile.build. This simplifies the
rules and also makes it possible to set $(objtree) to '.' later. Before
this change, a dependency on $(objtree)/<dir> would be satisfied by
<dir> in $(srctree).

When installing the firmware blobs, call mkdir like in Makefile.modinst.

Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-05-14 22:43:04 +02:00
Masahiro Yamada
38385f8f01 kbuild: trivial - remove trailing spaces
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-30 17:34:32 +02:00
Michal Marek
3ce9e53e78 kbuild: Fix accidental revert in commit fe04ddf
Commit fe04ddf7c2 ("kbuild: Do not package /boot and /lib in make
tar-pkg") accidentally reverted two previous kbuild commits.  I don't
know what I was thinking.

This brings back changes made by commits 24cc7fb69a ("x86/kbuild:
archscripts depends on scripts_basic") and c1c1a59e37 ("firmware: fix
directory creation rule matching with make 3.80")

Reported-by: Jan Beulich <JBeulich@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15 13:01:05 -07:00
Michal Marek
fe04ddf7c2 kbuild: Do not package /boot and /lib in make tar-pkg
There were reports of users destroying their Fedora installs by a kernel
tarball that replaces the /lib -> /usr/lib symlink. Let's remove the
toplevel directories from the tarball to prevent this from happening.

Reported-by: Andi Kleen <andi@firstfloor.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 16:26:19 +02:00
Mark Asselstine
c1c1a59e37 firmware: fix directory creation rule matching with make 3.80
Since make 3.80 doesn't support secondary expansion it uses a fallback
rule to create firmware directories which is matched after primary
expansion of the $(installed-fw) rule's prerequisite. Commit
6c7080a61f [firmware: fix directory creation rule matching with make
3.82] changed the expression generated after primary expansion such
that the fallback was not matched. Updating the fallback rule to match
the new look primary expansion is not an option for various reasons.

The trailing slash added here to $(INSTALL_FW_PATH)/. while defining
installed-fw-dirs fixes builds with make 3.82 since this will provide
a matching rule for $(INSTALL_FW_PATH)/$$(dir %) when % is in the base
firmware directory (ie. $(dir %) gives './'). Versions of make prior
to 3.82 will strip this trailing slash along with the one generated by
$(dir %) when % is in the base firmware directory and as such continue
to function as before.

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-21 13:15:42 +02:00
Mark Asselstine
6c7080a61f firmware: fix directory creation rule matching with make 3.82
Attempting to run 'firmware_install' with CONFIG_USB_SERIAL_TI=y when
using make 3.82 results in an error

make[2]: *** No rule to make target `/lib/firmware/./', needed by
`/lib/firmware/ti_3410.fw'.  Stop.

It turns out make 3.82 is picky when matching directory names with
trailing slashes as a result, where make 3.81 would handle this
correctly make 3.82 does not find the rule needed to create the
directory.

The './' seen in the error is added by $(dir) for firmware which
resides in the base firmware src directory, such as
ti_3410.fw.ihex. By performing $(dir) after we prepend the
$(INSTALL_FW_PATH) we can ensure we don't end up with a './' in the
middle of the path and the directory will be properly created.

This change works with make 3.81 and should work with previous
versions as well.

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-08-30 16:27:13 +02:00
David Woodhouse
759da92671 firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages
People don't like them and think they're errors.

Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-02 07:52:29 +01:00
David Woodhouse
44463f7dd6 firmware: create firmware binaries during 'make modules'.
This means that we no longer need write access to the source tree while
doing 'make modules_install'.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25 14:26:30 -04:00
David Woodhouse
7259d936c6 Update scripts/Makefile.fwinst to cope with older make
Also fix unwanted rebuilds of the firmware/ihex2fw tool by including
the .ihex2fw.cmd file when present.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-17 09:12:04 -07:00
David Woodhouse
8bd6b2229b ihex: add ihex2fw tool for converting HEX files into firmware images
Not the straight conversion to binary which objcopy can do for us, but
actually representing each record with its original {addr, length},
because some drivers need that information preserved.

Fix up 'firmware_install' to be able to build $(hostprogs-y) too.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:47:41 +01:00
David Woodhouse
88ecf814c4 firmware: Add firmware installation to modules_install, add firmware_install
For 'make modules_install', install any firmware required by
the modules which are being installed.

Also add a 'make firmware_install' target which doesn't depend on the
configuration, but installs _all_ available in-kernel-tree firmware into
$(INSTALL_FW_PATH), which defaults to /lib/firmware. This is intended
for distributors to make arch-independent (and config-independent)
packages containing firmware.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-10 14:47:34 +01:00