A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17e2d ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CMIS 5.2 standard section 9.4.2 defines four types of firmware update
supported mechanism: None, only LPL, only EPL, both LPL and EPL.
Currently, only LPL (Local Payload) type of write firmware block is
supported. However, if the module supports both LPL and EPL the flashing
process wrongly fails for no supporting LPL.
Fix that, by allowing the write mechanism to be LPL or both LPL and
EPL.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reported-by: Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240812140824.3718826-1-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'at least one change' requirement is not applicable for context
creation, skip the check in such case.
This allows a command such as 'ethtool -X eth0 context new' to work.
The command works by mistake when using older versions of userspace
ethtool due to an incompatibility issue where rxfh.input_xfrm is passed
as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent
userspace. This patch does not try to solve the incompatibility issue.
Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/
Fixes: 84a1d9c482 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240807173352.3501746-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab186 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We expect drivers implementing the new create/modify/destroy
API to populate the defaults in struct ethtool_rxfh_context.
In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key
are NULL so drivers can't give us defaults even if they want to.
Call get_rxfh() to fetch the values. We can reuse rxfh_dev
for the get_rxfh(), rxfh stores the input from the user.
This fixes IOCTL reporting 0s instead of the default key /
indir table for drivers using legacy API.
Add a check to try to catch drivers using the new API
but not populating the key.
Fixes: 7964e78846 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The indirection table and the key follow struct ethtool_rxfh
in user memory.
To reset the indirection table user space calls SET_RXFH with
table of size 0 (OTOH to say "no change" it should use -1 / ~0).
The logic for calculating the offset where they key sits is
incorrect in this case, as kernel would still offset by the full
table length, while for the reset there is no indir table and
key is immediately after the struct.
$ ethtool -X eth0 default hkey 01:02:03...
$ ethtool -x eth0
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
[...]
Fixes: 3de0b59239 ("ethtool: Support for configurable RSS hash key")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The response to a GET request in Netlink should fully identify
the queried object. RSS_GET accepts context id as an input,
so it must echo that attribute back to the response.
After (assuming context 1 has been created):
$ ./cli.py --spec netlink/specs/ethtool.yaml \
--do rss-get \
--json '{"header": {"dev-index": 2}, "context": 1}'
{'context': 1,
'header': {'dev-index': 2, 'dev-name': 'eth0'},
[...]
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c30 ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15e ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b67277 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility
default_timestamp flag has been introduced in phy_device that is set by
the phy driver to know we are using the old API behavior.
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-4-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new link mode necessary for 10 MBit single-pair
connection in BroadR-Reach mode on bcm5481x PHY by Broadcom.
This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom
terminology. Another link mode to be used is 1BR100 and it is already
present as 100baseT1, because Broadcom's 1BR100 became 100baseT1
(IEEE 802.3bw).
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240712150709.3134474-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For a PSE supporting both c33 and PoDL, setting config for one type of PoE
leaves the other type's config null. Currently, this case returns
EOPNOTSUPP, which is incorrect. Instead, we should do nothing if the
configuration is empty.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: d83e13761d ("net: pse-pd: Use regulator framework within PSE framework")
Link: https://patch.msgid.link/20240711-fix_pse_pd_deref-v3-1-edd78fc4fe42@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, during the module firmware flashing process, unicast
notifications are sent from the kernel using the same sequence number,
making it impossible for user space to track missed notifications.
Monotonically increase the message sequence number, so the order of
notifications could be tracked effectively.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240711080934.2071869-1-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c809 ("net: ethtool: Fix RSS setting")
eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers (bnxt but I think also mlx5 from ML discussions) change
the size of the indirection table depending on the number of Rx rings.
Decouple the max table size from the size of the currently used table,
so that we can reserve space in the context for table growth.
Static members in ethtool_ops are good enough for now, we can add
callbacks to read the max size more dynamically if someone needs
that.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RSS contexts may get lost from a device, in various extreme circumstances.
Specifically if the firmware leaks resources and resets, or crashes and
either recovers in partially working state or the crash causes a
different FW version to run - creating the context again may fail.
Drivers should do their absolute best to prevent this from happening.
When it does, however, telling user that a context exists, when it can't
possibly be used any more is counter productive. Add a helper for
drivers to discard contexts. Print an error, in the future netlink
notification will also be sent.
More robust approaches were proposed, like keeping the contexts
but marking them as "dead" (but possibly resurrected by next reset).
That may be better but it's unclear at this stage whether the
effort is worth the benefits.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user submits a rxfh set command without touching XFRM_SYM_XOR,
rxfh.input_xfrm is set to RXH_XFRM_NO_CHANGE, which is equal to 0xff.
Testing if (rxfh.input_xfrm & RXH_XFRM_SYM_XOR &&
!ops->cap_rss_sym_xor_supported)
return -EOPNOTSUPP;
Will always be true on devices that don't set cap_rss_sym_xor_supported,
since rxfh.input_xfrm & RXH_XFRM_SYM_XOR is always true, if input_xfrm
was not set, i.e RXH_XFRM_NO_CHANGE=0xff, which will result in failure
of any command that doesn't require any change of XFRM, e.g RSS context
or hash function changes.
To avoid this breakage, test if rxfh.input_xfrm != RXH_XFRM_NO_CHANGE
before testing other conditions. Note that the problem will only trigger
with XFRM-aware userspace, old ethtool CLI would continue to work.
Fixes: 0dd415d155 ("net: ethtool: add a NO_CHANGE uAPI for new RXFH's input_xfrm")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20240710225538.43368-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_get_max_rxfh_channel() gets called when user requests
deactivating Rx channels. Check the additional RSS contexts, too.
While we do track whether RSS context has an indirection
table explicitly set by the user, no driver looks at that bit.
Assume drivers won't auto-regenerate the additional tables,
to be safe.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710174043.754664-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0d1b7d6c92 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710174043.754664-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not attach SQI value if link is down. "SQI values are only valid if
link-up condition is present" per OpenAlliance specification of
100Base-T1 Interoperability Test suite [1]. The same rule would apply
for other link types.
[1] https://opensig.org/automotive-ethernet-specifications/#
Fixes: 8066021915 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://patch.msgid.link/20240709061943.729381-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-5-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-1-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 31e0aa99dc ("ethtool: Veto some operations during firmware flashing process")
added a flag module_fw_flash_in_progress to struct net_device. As
this is ethtool related state, move it to the recently created
struct ethtool_netdev_state, accessed via the 'ethtool' member of
struct net_device.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240703121849.652893-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Device driver gets access to rxfh_dev, while rxfh is just a local
copy of user space params. We need to check what RSS context ID
driver assigned in rxfh_dev, not rxfh.
Using rxfh leads to trying to store all contexts at index 0xffffffff.
From the user perspective it leads to "driver chose duplicate ID"
warnings when second context is added and inability to access any
contexts even tho they were successfully created - xa_load() for
the actual context ID will return NULL, and syscall will return -ENOENT.
Looks like a rebasing mistake, since rxfh_dev was added relatively
recently by commit fb6e30a725 ("net: ethtool: pass a pointer to
parameters to get/set_rxfh ethtool ops").
Fixes: eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240702164157.4018425-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a general protection fault caused by a null pointer
dereference in coalesce_fill_reply(). The issue occurs when req_base->dev
is null, leading to an invalid memory access.
This panic occurs if dumping coalesce when no device name is specified.
Fixes: f750dfe825 ("ethtool: provide customized dim profile management")
Reported-by: syzbot+e77327e34cdc8c36b7d3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e77327e34cdc8c36b7d3
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 'ethtool -x' with rss_context != 0, instead of calling the driver to
read the RSS settings for the context, just get the settings from the
rss_ctx xarray, and return them to the user with no driver involvement.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/2d0190fa29638f307ea720f882ebd41f6f867694.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While this is not needed to serialise the ethtool entry points (which
are all under RTNL), drivers may have cause to asynchronously access
dev->ethtool->rss_ctx; taking dev->ethtool->rss_lock allows them to
do this safely without needing to take the RTNL.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/7f9c15eb7525bf87af62c275dde3a8570ee8bf0a.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new API to create/modify/remove RSS contexts, that passes in the
newly-chosen context ID (not as a pointer) rather than leaving the
driver to choose it on create. Also pass in the ctx, allowing drivers
to easily use its private data area to store their hardware-specific
state.
Keep the existing .set_rxfh API for now as a fallback, but deprecate it
for custom contexts (rss_context != 0).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/45f1fe61df2163c091ec394c9f52000c8b16cc3b.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since drivers are still choosing the context IDs, we have to force the
XArray to use the ID they've chosen rather than picking one ourselves,
and handle the case where they give us an ID that's already in use.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/801f5faa4cec87c65b2c6e27fb220c944bce593a.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dev->ethtool is a pointer to new struct ethtool_netdev_state, which
currently contains only the wol_enabled field.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a562278371de7534ed1eb17531838ca090633.1719502239.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the ability to flash the modules' firmware by implementing the
interface between the user space and the kernel.
Example from a succeeding implementation:
# ethtool --flash-module-firmware swp40 file test.bin
Transceiver module firmware flashing started for device swp40
Transceiver module firmware flashing in progress for device swp40
Progress: 99%
Transceiver module firmware flashing completed for device swp40
In addition, add infrastructure that allows modules to set socket-specific
private data. This ensures that when a socket is closed from user space
during the flashing process, the right socket halts sending notifications
to user space until the work item is completed.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the CMIS standard, the firmware update process is done using
a CDB commands sequence.
Implement a work that will be triggered from the module layer in the
next patch the will initiate and execute all the CDB commands in order, to
eventually complete the firmware update process.
This flashing process includes, writing the firmware image, running the new
firmware image and committing it after testing, so that it will run upon
reset.
This work will also notify user space about the progress of the firmware
update process.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CDB (Command Data Block Message Communication) reads and writes are
performed on memory map pages 9Fh-AFh according to the CMIS standard,
section 8.20 of revision 5.2.
Page 9Fh is used to specify the CDB command to be executed and also
provides an area for a local payload (LPL).
According to the CMIS standard, the firmware update process is done using
a CDB commands sequence that will be implemented in the next patch.
The kernel interface that will implement the firmware update using CDB
command will include 2 layers that will be added under ethtool:
* The upper layer that will be triggered from the module layer, is
cmis_fw_update.
* The lower one is cmis_cdb.
In the future there might be more operations to implement using CDB
commands. Therefore, the idea is to keep the CDB interface clean and the
cmis_fw_update specific to the CDB commands handling it.
These two layers will communicate using the API the consists of three
functions:
- struct ethtool_cmis_cdb *
ethtool_cmis_cdb_init(struct net_device *dev,
struct ethtool_module_fw_flash_params *params);
- void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb);
- int ethtool_cmis_cdb_execute_cmd(struct net_device *dev,
struct ethtool_cmis_cdb_cmd_args *args);
Add the CDB layer to support initializing, finishing and executing CDB
commands:
* The initialization process will include creating of an ethtool_cmis_cdb
instance, querying the module CDB support, entering and validating the
password from user space (CMD 0x0000) and querying the module features
(CMD 0x0040).
* The finishing API will simply free the ethtool_cmis_cdb instance.
* The executing process will write the CDB command to EEPROM using
set_module_eeprom_by_page() that was presented earlier, and will
process the reply from EEPROM.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some operations cannot be performed during the firmware flashing
process.
For example:
- Port must be down during the whole flashing process to avoid packet loss
while committing reset for example.
- Writing to EEPROM interrupts the flashing process, so operations like
ethtool dump, module reset, get and set power mode should be vetoed.
- Split port firmware flashing should be vetoed.
In order to veto those scenarios, add a flag in 'struct net_device' that
indicates when a firmware flash is taking place on the module and use it
to prevent interruptions during the process.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add progress notifications ability to user space while flashing modules'
firmware by implementing the interface between the user space and the
kernel.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new params for "ethtool -C" that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
The target NIC is named ethx.
Assume that ethx only declares support for rx profile setting
(with DIM_PROFILE_RX flag set in profile_flags) and supports modification
of usec and pkt fields.
1. Query the currently customized list of the device
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 256, .comps = n/a,},
{.usec = 8, .pkts = 256, .comps = n/a,},
{.usec = 64, .pkts = 256, .comps = n/a,},
{.usec = 128, .pkts = 256, .comps = n/a,},
{.usec = 256, .pkts = 256, .comps = n/a,}
tx-profile: n/a
2. Tune
$ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n
"n" means do not modify this field.
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 1, .comps = n/a,},
{.usec = 2, .pkts = 256, .comps = n/a,},
{.usec = 3, .pkts = 3, .comps = n/a,},
{.usec = 4, .pkts = 4, .comps = n/a,},
{.usec = 256, .pkts = 5, .comps = n/a,}
tx-profile: n/a
3. Hint
If the device does not support some type of customized dim profiles,
the corresponding "n/a" will display.
If the "n/a" field is being modified, -EOPNOTSUPP will be reported.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'cable_test_tdr_req_info' is unused since the original
commit f2bc8ad31a ("net: ethtool: Allow PHY cable test TDR data to
configured").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Statistic values should be set to ETHTOOL_STAT_NOT_SET even if the
device doesn't support statistics. Otherwise zeros will be returned as
if they are proper values:
host# ethtool -I -T lo
Time stamping parameters for lo:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
Statistics:
tx_pkts: 0
tx_lost: 0
tx_err: 0
Fixes: 0e9c127729 ("ethtool: add interface to read Tx hardware timestamping statistics")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240530040814.1014446-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 18ff0bcda6 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.
A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.
Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiple network devices that support hardware timestamping appear to have
common behavior with regards to timestamp handling. Implement common Tx
hardware timestamping statistics in a tx_stats struct_group. Common Rx
hardware timestamping statistics can subsequently be implemented in a
rx_stats struct_group for ethtool_ts_stats.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 292fac464b ("net: ethtool: eee: Remove legacy _u32 from keee")
this function has no user any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b4ff9b51-092b-4d44-bfce-c95342a05b51@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
