Commit Graph

1776 Commits

Author SHA1 Message Date
Takashi Iwai
506c203cc3 ALSA: usb-audio: Fix hw constraints dependencies
Since the recent refactoring, it's been reported that some USB-audio
devices (typically webcams) are no longer detected properly by
PulseAudio.  The debug session revealed that it's failing at probing
by PA to try the sample rate 44.1kHz while the device has discrete
sample rates other than 44.1kHz.  But the puzzle was that arecord
works as is, and some other devices with the discrete rates work,
either.

After all, this turned out to be the lack of the dependencies in a few
hw constraint rules: snd_pcm_hw_rule_add() has the (variable)
arguments specifying the dependent parameters, and some functions
didn't set the target parameter itself as the dependencies.  This
resulted in an invalid parameter that could be generated only in a
certain call pattern.  This bug itself has been present in the code,
but it didn't trigger errors just because the rules were casually
avoiding such a corner case.  After the recent refactoring and
cleanup, however, the hw constraints work "as expected", and the
problem surfaced now.

For fixing the problem above, this patch adds the missing dependent
parameters to each snd_pcm_hw_rule() call.

Fixes: bc4e94aa8e ("ALSA: usb-audio: Handle discrete rates properly in hw constraints")
BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181014
Link: https://lore.kernel.org/r/20210120204554.30177-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-20 21:46:45 +01:00
Takashi Iwai
532a208ad6 ALSA: usb-audio: Avoid implicit feedback on Pioneer devices
For addressing the regression on Pioneer devices, we recently
corrected the quirk code to enable the implicit feedback mode on those
devices properly.  However, the devices still showed problems with the
full duplex operations with JACK, and after debug sessions, we figured
out that the older kernels that had worked with JACK also didn't use
the implicit feedback mode at all although they had the quirk code to
enable it; instead, the old code worked just to skip the normal sync
endpoint setup that would have been detected without it.  IOW, what
broke without the implicit-fb quirk in the past was the application of
the normal sync endpoint that is actually the capture data endpoint on
these devices.

This patch covers the overseen piece: it modifies the quirk code again
not to enable the implicit feedback mode but just to make the driver
skipping the sync endpoint detection.  This made the driver working
with JACK full-duplex mode again.

Still it's not quite clear why the implicit feedback doesn't work on
those devices yet; maybe it's about some issues in the URB setup.  But
at least, with this patch, the driver should work in the level of the
older kernels again.

Fixes: 167c9dc84e ("ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices")
Link: https://lore.kernel.org/r/20210118075816.25068-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18 09:38:13 +01:00
Takashi Iwai
3784d449d7 ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1
The UAC2/3 sample rate setup is based on the clock node, which is
usually shared in the interface, and can't be re-setup without
deselecting the interface once, and that's how the current code
behaves.  OTOH, the sample rate setup of UAC1 is per endpoint, hence
we basically need to call for each endpoint usage even if those share
the same interface.

This patch fixes the behavior of UAC1 to call always
snd_usb_init_sample_rate() in snd_usb_endpoint_configure().

Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210118075816.25068-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18 09:38:03 +01:00
Takashi Iwai
87cb9af9f8 ALSA: usb-audio: Fix UAC1 rate setup for secondary endpoints
The current sample rate setup function for UAC1 assumes only the first
endpoint retrieved from the interface:altset pair, but the rate set up
may be needed also for the secondary endpoint.  Also, retrieving the
endpoint number from the interface descriptor is redundant; we have
already the target endpoint in the given audioformat object.

This patch simplifies the code and corrects the target endpoint as
described in the above.  It simply refers to fmt->endpoint directly.

Also, this patch drops the pioneer_djm_set_format_quirk() that is
caleld from snd_usb_set_format_quirk(); this function does the sample
rate setup but for the capture endpoint (0x82), and that's exactly
what the change above fixes.

Link: https://lore.kernel.org/r/20210118075816.25068-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-18 09:37:53 +01:00
Takashi Iwai
e4ea77f8e5 ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
Since the commit 5a6c3e11c9 ("ALSA: usb-audio: Add hw constraint for
implicit fb sync"), we apply the hw constraints for the implicit
feedback sync to make the secondary open aligned with the already
opened stream setup.  This change assumed that the secondary open is
performed after the first stream has been already set up, and adds the
hw constraints to sync with the first stream's parameters only when
the EP setup for the first stream was confirmed at the open time.
However, most of applications handling the full-duplex operations do
open both playback and capture streams at first, then set up both
streams.  This results in skipping the additional hw constraints since
the counter-part stream hasn't been set up yet at the open of the
second stream, and it eventually leads to "incompatible EP" error in
the end.

This patch corrects the behavior by always applying the hw constraints
for the implicit fb sync.  The hw constraint rules are defined so that
they check the sync EP dynamically at each invocation, instead.  This
covers the concurrent stream setups better and lets the hw refine
calls resolving to the right configuration.

Also this patch corrects a minor error that has existed in the debug
print that isn't built as default.

Fixes: 5a6c3e11c9 ("ALSA: usb-audio: Add hw constraint for implicit fb sync")
Link: https://lore.kernel.org/r/20210111081611.12790-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-13 22:25:27 +01:00
Takashi Iwai
167c9dc84e ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices
Pioneer devices have both playback and capture streams sharing the
same iface/altsetting, and those need to be paired as implicit
feedback.  Instead of a half-baked (and broken) static quirk entry,
set up more generically for those devices by checking the number of
endpoints and the attribute of the secondary EP.

Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Reported-by: František Kučera <konference@frantovo.cz>
Link: https://lore.kernel.org/r/20210108075219.21463-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08 23:43:39 +01:00
Takashi Iwai
eae4d054f9 ALSA: usb-audio: Annotate the endpoint index in audioformat
There are devices that have multiple endpoints sharing the same
iface/altset not only for sync but also for the actual streams, and
the audioformat for such an endpoint needs to be handled with the
proper endpoint index; otherwise it confuses the endpoint management.

This patch extends the audioformat to annotate the endpoint index, and
put the proper ep_idx=1 to Pioneer device quirk entries accordingly.

Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210108075219.21463-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08 23:43:38 +01:00
Takashi Iwai
00272c6182 ALSA: usb-audio: Avoid unnecessary interface re-setup
The current endpoint handling assumed (more or less) a unique 1:1
relation between the endpoint and the iface/altset.  The exception was
the sync EP without the implicit feedback which has usually the
secondary EP of the same altset.  This works fine for most devices,
but it turned out that some unusual devices like Pinoeer's ones have
both playback and capture endpoints in the same iface/altsetting and
use both for the implicit feedback mode.  For handling such a case, we
need to extend the endpoint management to take the shared interface
into account.

This patch does that: it adds a new object snd_usb_iface_ref for
managing the reference counts of the each USB interface that is used
by each endpoint.  The interface setup is performed only once for the
(sharing) endpoints, and the doubly initialization is avoided.

Along with this, the resource release of endpoints and interface
refcounts are put into a single function, snd_usb_endpoint_free_all()
instead of looping in the caller side.

Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Link: https://lore.kernel.org/r/20210108075219.21463-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08 23:43:37 +01:00
Takashi Iwai
5d15f1eb45 ALSA: usb-audio: Choose audioformat of a counter-part substream
The implicit feedback mode needs to handle two endpoints and the
choice of the audioformat object for the sync EP is important since
this determines the compatibility of the hw_params.  The current code
uses the same audioformat object if both the main EP and the sync EP
point to the same iface/altsetting.  This was done in consideration of
the non-implicit-fb sync EP handling, and it doesn't match well with
the cases where actually to endpoints are defined in the sameiface /
altsetting like a few Pioneer devices.

Modify snd_usb_find_implicit_fb_sync_format() to pick up the
audioformat that is assigned in the counter-part substreams primarily,
so that the actual capture stream can be opened properly.  We keep the
same audioformat object only as a fallback in case nothing found,
though.

Fixes: 9fddc15e80 ("ALSA: usb-audio: Factor out the implicit feedback quirk code")
Link: https://lore.kernel.org/r/20210108075219.21463-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08 23:43:36 +01:00
Takashi Iwai
b2345a8a43 ALSA: usb-audio: Fix the missing endpoints creations for quirks
The recent change in the endpoint management moved the endpoint object
creation from the stream open time to the parser of the audio
descriptor.  It works fine for the standard audio, but it overlooked
the other places that create audio streams via quirks
(QUIRK_AUDIO_FIXED_ENDPOINT) like the reported a few Pioneer devices;
those call snd_usb_add_audio_stream() manually, hence they miss the
endpoints, eventually resulting in the error at opening streams.
Moreover, now the sync EP setup was moved to the explicit call of
snd_usb_audioformat_set_sync_ep(), and this needs to be added for
those places, too.

This patch addresses those regressions for quirks.  It adds a local
helper function add_audio_stream_from_fixed_fmt(), which does the all
needed tasks, and replaces the calls of snd_usb_add_audio_stream()
with this new function.

Fixes: 54cb31901b ("ALSA: usb-audio: Create endpoint objects at parsing phase")
Reported-by: František Kučera <konference@frantovo.cz>
Link: https://lore.kernel.org/r/20210108075219.21463-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-08 23:43:35 +01:00
Timon Reinold
b0e1306302 ALSA: usb-audio: Add quirk for RC-505
BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the
same quirk as these other BOSS devices.

Without this quirk it is neither possible to capture audio from nor to
write audio to the RC-505. Both just result in an empty audio
stream. With these changes both capture and playback seem to work
quite fine. MIDI funtionality was not tested.

Tested-by: Harry Reinold <harry.reinold@posteo.de>
Signed-off-by: Timon Reinold <tirei@agon.one>
Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.one
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-03 08:58:39 +01:00
Takashi Iwai
3deba4d8f0 ALSA: usb-audio: Add quirk for BOSS AD-10
BOSS AD-10 requires the very same quirk like other BOSS devices to
enable the special implicit feedback mode.

Reported-and-tested-by: Martin Passing <martin@passing.name>
Link: https://lore.kernel.org/r/20201229083428.20467-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-29 09:34:59 +01:00
Takashi Iwai
c06ccf3ebb ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks
The calculation of in_cables and out_cables bitmaps are done with the
bit shift by the value from the descriptor, which is an arbitrary
value, and can lead to UBSAN shift-out-of-bounds warnings.

Fix it by filtering the bad descriptor values with the check of the
upper bound 0x10 (the cable bitmaps are 16 bits).

Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-23 18:46:54 +01:00
Mike Oliphant
4387722682 ALSA: usb-audio: Add implicit feeback support for the BOSS GT-1
The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback
like other similar BOSS devices. This patch adds this support.

[ rearranged the table entry in the ID order -- tiwai ]

Signed-off-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20201221215533.2511-1-oliphant@nostatic.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-22 09:25:14 +01:00
Takashi Iwai
525d9c57d0 ALSA: usb-audio: Add alias entry for ASUS PRIME TRX40 PRO-S
ASUS PRIME TRX40 PRO-S mobo with 0b05:1918 needs the same quirk alias
for another ASUS mobo (0b05:1917) for the proper mixer mapping, etc.
Add the corresponding entry.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210783
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201221080159.24468-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-21 09:02:33 +01:00
Takashi Iwai
9df28edce7 ALSA: usb-audio: Disable sample read check if firmware doesn't give back
Some buggy firmware don't give the current sample rate but leaves
zero.  Handle this case more gracefully without warning but just skip
the current rate verification from the next time.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-18 17:08:24 +01:00
Amadej Kastelic
725124d10d ALSA: usb-audio: Add VID to support native DSD reproduction on FiiO devices
Add VID to support native DSD reproduction on FiiO devices.

Tested-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Signed-off-by: Emilio Moretti <emilio.moretti@gmail.com>
Signed-off-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X9j7wdXSr4XyK7Bd@ryzen.localdomain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-17 10:40:25 +01:00
Takashi Iwai
43d5ca88df ALSA: usb-audio: Fix potential out-of-bounds shift
syzbot spotted a potential out-of-bounds shift in the USB-audio format
parser that receives the arbitrary shift value from the USB
descriptor.

Add a range check for avoiding the undefined behavior.

Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-14 09:10:25 +01:00
Takashi Iwai
e5fab13a7c Merge branch 'for-linus' into for-next
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-14 09:05:29 +01:00
Takashi Iwai
c6dde8ffd0 ALSA: usb-audio: Fix control 'access overflow' errors from chmap
The current channel-map control implementation in USB-audio driver may
lead to an error message like
  "control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set.  It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.

This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-11 14:03:55 +01:00
Takashi Iwai
c9a867fd84 ALSA: usb-audio: Add implicit fb support for Steinberg UR22
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.

Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-10 19:55:35 +01:00
Takashi Iwai
2c854e5c63 ALSA: usb-audio: Add quirk for Pioneer DJ DDJ-SR2
Yet another quirk for Pioneer DJ DDJ-SR2, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.

Reported-by: Geraldo <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/20201130083714.10640-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-30 09:37:50 +01:00
Daniel Martin
83ab7b45a2 ALSA: usb-audio: Add support for Pioneer DJ DDJ-RR controller
This patch allows the Pioneer DJ DDJ-RR to be seen as a USB audio
device under Linux and therefore usable in such applications as
Mixxx.

Tested Master Audio out, headphones (both output jacks) and microphone
input. All work perfectly.

Signed-off-by: Daniel Martin <dmanlfc@gmail.com>
Link: https://lore.kernel.org/r/20201128084035.2958-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-28 09:43:47 +01:00
Hector Martin
402d5840b0 ALSA: usb-audio: US16x08: fix value count for level meters
The level meter control returns 34 integers of info. This fixes:

snd-usb-audio 3-1:1.0: control 2:0:0:Level Meter:0: access overflow

Fixes: d2bb390a20 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20201127132635.18947-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-27 14:56:40 +01:00
Dylan Robinson
29b105d947 ALSA: usb-audio: Fix MOTU M-Series quirks
Now that the usb audio driver correctly finds implicit feedback endpoints,
the implicit feedback quirk for the MOTU M-Series is no longer required.

This also removes some unnecessary vendor specific messages from the MOTU
M-Series boot quirk. The removed vendor specific messages turned on vendor
specific interrupts to the host every 32 samples. The only thing the boot
quirk needs to do is wait for 2 seconds.

Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-42-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:17:45 +01:00
Takashi Iwai
ad0e6a3511 ALSA: usb-audio: Fix quirks for other BOSS devices
A few other BOSS devices (BR-80, GT-100v2, Katana) seem requiring the
same quirk as BOSS GT-001, i.e. no implicit feedback for playback but
tying with capture.  Add and correct the corresponding quirk table
entries for them.

Reported-and-tested-by: Keith Milner <kamilner@superlative.org>
Link: https://lore.kernel.org/r/20201123085347.19667-41-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:17:34 +01:00
Takashi Iwai
62abd092f9 ALSA: usb-audio: Add implicit_fb module option
A new module option, implicit_fb, is added to specify the driver
looking for the implicit feedback sync.  This can be useful for a
device that could be working better in the implicit feed back mode and
user wants to test it quickly.  When this works, we can add the quirk
entry easily.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-40-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:17:24 +01:00
Takashi Iwai
83b7dcbc51 ALSA: usb-audio: Add generic implicit fb parsing
This patch extends the implicit feedback mode parser code to check the
description more generically, so that the quirk entries can be added
without the explicit EP and interface numbers.  The search is done for
the next and the previous interface of the given altset, and if both
entries are ASYNC mode and the direction matches, it just takes as the
sync endpoint.  The generic parser is applicable only for the playback
stream.

As of now, only a few M-Audio devices have been converted to use this
mode.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-39-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:17:11 +01:00
Takashi Iwai
9fddc15e80 ALSA: usb-audio: Factor out the implicit feedback quirk code
The code dealing with the implicit feedback mode grew recently, and
it's becoming messy.  As we receive more and more devices that need
the similar handling, it's better to be processed through a table
instead of the open code.

This patch moves the code that is relevant with parsing the implicit
feedback mode and some helpers into another file, implicit.c.  The
detection and the setup of the implicit feedback sync EPs are
rewritten to use the ID/class matching table instead.

There should be no functional changes.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:17:00 +01:00
Takashi Iwai
6234fdc1ce ALSA: usb-audio: Quirk for BOSS GT-001
The capture stream of BOSS GT-001 seems always requiring to be tied
with the playback stream.  OTOH, the playback stream of this device
doesn't seem working in the implicit fb mode, per se, since the
playback must be running before the capture stream.

This patch tries to address the points above:
- Avoid the implicit fb mode for the playback
- Set up a fake sync EP for the capture stream with the hard-coded
  playback stream using the implicit fb mode

Reported-by: Keith Milner <kamilner@superlative.org>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:53 +01:00
Takashi Iwai
8ec08b1a5c ALSA: usb-audio: Show sync endpoint information in proc outputs
Now the sync endpoints have been parsed at the beginning and won't be
changed dynamically, let's show them in the proc outputs for helping
debugging.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-36-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:45 +01:00
Takashi Iwai
89fa3f686c ALSA: usb-audio: Use unsigned char for iface and altsettings fields
Just for consistency, use unsigned char for iface and altsetting in
allover places.  Also rearrange the field positions of
snd_usb_endpiont and tidy up with some comments.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-35-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:37 +01:00
Takashi Iwai
53837b4ac2 ALSA: usb-audio: Replace slave/master terms
Follow the inclusive terminology, just replace sync_master/sync_slave
with sync_source/sync_sink.  It's also a bit clearer from its meaning,
too.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-34-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:30 +01:00
Takashi Iwai
13ee03361f ALSA: usb-audio: Simplify rate_min/max and rates set up
There are multiple places in format.c performing the similar code for
setting the rate_min, rate_max and rates fields.  This patch unifies
those in a helper function and calls it at the end of the parser phase
so that all rate_table entries have been already determined.

No functional changes, just a minor code refactoring.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:22 +01:00
Takashi Iwai
3d58760f4d ALSA: usb-audio: Unify the code for the next packet size calculation
There are two places calculating the next packet size for the playback
stream in the exactly same way.  Provide the single helper for this
purpose and use it from both places gracefully.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-32-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:13 +01:00
Takashi Iwai
6aa719d15a ALSA: usb-audio: Drop unneeded snd_usb_substream fields
Some fields like interface and alt_idx in snd_usb_substream are mostly
useless now as they can be referred via either cur_audiofmt or
data_endpoint assigned to the substream.  Drop those, and also assure
the concurrency about the access of cur_audiofmt field.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:16:04 +01:00
Takashi Iwai
d0f09d1e4a ALSA: usb-audio: Refactoring endpoint URB deactivation
Minor code refactoring to consolidate the URB deactivation code in
endpoint.c.  A slight behavior change is that the error handling in
snd_usb_endpoint_start() leaves EP_FLAG_STOPPING now.  This should be
synced with the later PCM sync_stop callback.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:56 +01:00
Takashi Iwai
43b81e8406 ALSA: usb-audio: Use atomic_t for endpoint use_count
The endpoint objects may be started/stopped concurrently by different
substreams in the case of implicit feedback mode, while the current
code handles the reference counter without any protection.

This patch changes the refcount to atomic_t for avoiding the
inconsistency.  We need no reference_t here as the refcount goes only
up to 2.

Also the name "use_count" is renamed to "running" since this is about
actually the running status, not the open refcount.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:48 +01:00
Takashi Iwai
cab941b7e5 ALSA: usb-audio: Constify audioformat pointer references
The audioformat is referred in many places but most of usages are
read-only.  Let's add const prefix in the possible places.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:36 +01:00
Takashi Iwai
c15871e17f ALSA: usb-audio: Fix possible stall of implicit fb packet ring-buffer
The implicit feedback mode uses a ring buffer for storing the received
packet sizes from the feedback source, and the code has a slight flaw;
when a playback stream stalls by some reason and the URBs aren't
processed, the next_packet FIFO might become empty, but the driver
can't distinguish whether it's empty or full because it's managed with
read_poss and write_pos.

This patch addresses those by changing the next_packet array
management.  Instead of keeping read and write positions, now the head
position and the queued amount are kept.  It's easier to understand
about the emptiness.  Also, the URB active flag is now cleared before
calling queue_pending_output_urbs() for avoiding (theoretically)
possible inconsistency.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-27-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:26 +01:00
Takashi Iwai
bf6313a0ff ALSA: usb-audio: Refactor endpoint management
This is an intensive surgery for the endpoint and stream management
for achieving more robust and clean code.

The goals of this patch are:
- More clear endpoint resource changes
- The interface altsetting control in a single place
Below are brief description of the whole changes.

First off, most of the endpoint operations are moved into endpoint.c,
so that the snd_usb_endpoint object is only referred in other places.
The endpoint object is acquired and released via the new functions
snd_usb_endpoint_open() and snd_usb_endpoint_close() that are called
at PCM hw_params and hw_free callbacks, respectively.  Those are
ref-counted and EPs can manage the multiple opens.

The open callback receives the audioformat and hw_params arguments,
and those are used for initializing the EP parameters; especially the
endpoint, interface and altset numbers are read from there, as well as
the PCM parameters like the format, rate and channels.  Those are
stored in snd_usb_endpoint object.  If it's the secondary open, the
function checks whether the given parameters are compatible with the
already opened EP setup, too.

The coupling with a sync EP (including an implicit feedback sync) is
done by the sole snd_usb_endpoint_set_sync() call.

The configuration of each endpoint is done in a single shot via
snd_usb_endpoint_configure() call.  This is the place where most of
PCM configurations are done.  A few flags and special handling in the
snd_usb_substream are dropped along with this change.

A significant difference wrt the configuration from the previous code
is the order of USB host interface setups.  Now the interface is
always disabled at beginning and (re-)enabled at the last step of
snd_usb_endpoint_configure(), in order to be compliant with the
standard UAC2/3.  For UAC1, the interface is set before the parameter
setups since there seem devices that require it (e.g. Yamaha THR10),
just like how it was done in the previous driver code.

The start/stop are almost same as before, also single-shots.  The URB
callbacks need to be set via snd_usb_endpoint_set_callback() like the
previous code at the trigger phase, too.

Finally, the flag for the re-setup is set at the device suspend
through the full EP list, instead of PCM trigger.  This catches the
overlooked cases where the PCM hasn't been running yet but the device
needs the full setup after resume.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:16 +01:00
Takashi Iwai
61cc2d775e ALSA: usb-audio: Fix EP matching for continuous rates
The function to evaluate the match of the parameters with an EP
assumes only the discrete rate tables and doesn't handle the
continuous rates properly.

This patch fixes match_endpoint_audioformats() to handle the
continuous rates.  Also the almost useless debug prints there are
dropped.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:15:06 +01:00
Takashi Iwai
75c16b5147 ALSA: usb-audio: Always set up the parameters after resume
The commit 92adc96f8e ("ALSA: usb-audio: set the interface format
after resume on Dell WD19") introduced the workaround for the broken
setup after the resume specifically on a Dell dock model.  However,
the full setup should have been performed after the resume on all
devices, as we can't guarantee the same state.  So this patch removes
the conditional check and applies the workaround always.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:54 +01:00
Takashi Iwai
96e221f379 ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback()
The prepare_data_urb and retire_data_urb fields of the endpoint object
are set dynamically at PCM trigger start/stop.  Those are evaluated in
the endpoint handler, but there can be a race, especially if two
different PCM substreams are handling the same endpoint for the
implicit feedback case.  Also, the data_subs field of the endpoint is
set and accessed dynamically, too, which has the same risk.

As a slight improvement for the concurrency, this patch introduces the
function to set the callbacks and the data in a shot with the memory
barrier.  In the reader side, it's also fetched with the memory
barrier.

There is still a room of race if prepare and retire callbacks are set
during executing the URB completion.  But such an inconsistency may
happen only for the implicit fb source, i.e. it's only about the
capture stream.  And luckily, the capture stream never sets the
prepare callback, hence the problem doesn't happen practically.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:44 +01:00
Takashi Iwai
57234bc103 ALSA: usb-audio: Stop both endpoints properly at error
start_endpoints() may leave the data endpoint running if an error
happens at starting the sync endpoint.  We should stop both streams
properly, instead.

While we're at it, move the debug prints into the endpoint.c that is a
more suitable place.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:36 +01:00
Takashi Iwai
73037c8dc1 ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments
A preliminary change for the later big changes.  This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:27 +01:00
Takashi Iwai
953a446b50 ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments
A preliminary change for the later big changes.  This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:18 +01:00
Takashi Iwai
d767aba202 ALSA: usb-audio: Pass snd_usb_audio object to quirk functions
A preliminary patch for the later big change.  Just a minor code
refactoring.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:09 +01:00
Takashi Iwai
c7f902015e ALSA: usb-audio: Don't set altsetting before initializing sample rate
Setting the active altsetting at changing sample rate seems
unrecommended.  The host should deselect the altsetting at first
before that, then select it again.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:14:00 +01:00
Takashi Iwai
e42a09bc52 ALSA: usb-audio: Add snd_usb_get_host_interface() helper
Add a helper function to retrieve the usb_host_interface object from
the given interface and altsetting number pair, which is a commonly
used procedure in the driver code.

No functional changes, just minor code refactoring.

Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-23 15:13:47 +01:00