Writing an invalid schemata with no domain values (e.g., "(L3|MB):"),
results in a silent failure, i.e. the last_cmd_status returns OK,
Check for an empty value and set the result string with a proper error
message and return -EINVAL.
Before the fix:
# mkdir /sys/fs/resctrl/p1
# echo "L3:" > /sys/fs/resctrl/p1/schemata
(silent failure)
# cat /sys/fs/resctrl/info/last_cmd_status
ok
# echo "MB:" > /sys/fs/resctrl/p1/schemata
(silent failure)
# cat /sys/fs/resctrl/info/last_cmd_status
ok
After the fix:
# mkdir /sys/fs/resctrl/p1
# echo "L3:" > /sys/fs/resctrl/p1/schemata
-bash: echo: write error: Invalid argument
# cat /sys/fs/resctrl/info/last_cmd_status
Missing 'L3' value
# echo "MB:" > /sys/fs/resctrl/p1/schemata
-bash: echo: write error: Invalid argument
# cat /sys/fs/resctrl/info/last_cmd_status
Missing 'MB' value
[ Tony: This is an unintended side effect of the patch earlier to allow the
user to just write the value they want to change. While allowing
user to specify less than all of the values, it also allows an
empty value. ]
Fixes: c4026b7b95 ("x86/intel_rdt: Implement "update" mode when writing schemata file")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20171110191624.20280-1-tony.luck@intel.com
Pull networking fixes from David Miller:
1) Use after free in vlan, from Cong Wang.
2) Handle NAPI poll with a zero budget properly in mlx5 driver, from
Saeed Mahameed.
3) If DMA mapping fails in mlx5 driver, NULL out page, from Inbar
Karmy.
4) Handle overrun in RX FIFO of sun4i CAN driver, from Gerhard
Bertelsmann.
5) Missing return in mdb and vlan prepare phase of DSA layer, from
Vivien Didelot.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
vlan: fix a use-after-free in vlan_device_event()
net: dsa: return after vlan prepare phase
net: dsa: return after mdb prepare phase
can: ifi: Fix transmitter delay calculation
tcp: fix tcp_fastretrans_alert warning
tcp: gso: avoid refcount_t warning from tcp_gso_segment()
can: peak: Add support for new PCIe/M2 CAN FD interfaces
can: sun4i: handle overrun in RX FIFO
can: c_can: don't indicate triple sampling support for D_CAN
net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs
net/mlx5e: Set page to null in case dma mapping fails
net/mlx5e: Fix napi poll with zero budget
net/mlx5: Cancel health poll before sending panic teardown command
net/mlx5: Loop over temp list to release delay events
rds: ib: Fix NULL pointer dereference in debug code
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE4bay/IylYqM/npjQHv7KIOw4HPYFAloFoQQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAe/sog7Dgc9hzQB/402UdBXnM4/AId9zYcvY/4XnE4bSvP
pi+46vQnSAtz2Mo0i/mjnEFVu1/+SNfdKFhSuKrBI/G4Q5pWLRd/7SBFReMnqKvr
lbsZnqZuyYKQW1Qzccm4t3BXIEa/tNhvz93QMQLv6vX3vADEwCUm5S9acaYFKqi7
b1QfQtn6olbBwCanQ4ICUECUXMeq78P7D763T5F9m0KyQJ9XIfyeM+JA6uzwaUoO
IUFG2XPJlmdcVu34u3zV9YZ3UqaconhUwyO41prhZUqwWy6KmZQL71JEXYvn+OYY
mkdfoK/1pFskkOBc3eMRUhtL3c7veCUhzblQBzImrlNUiDrHpJUxLUZQ
=XO2t
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.14-20171110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2017-11-10
this is a pull request for net/master.
The first patch by Richard Schütz for the c_can driver removes the false
indication to support triple sampling for d_can. Gerhard Bertelsmann's
patch for the sun4i driver improves the RX overrun handling. The patch
by Stephane Grosjean for the peak_canfd driver adds the PCI ids for
various new PCIe/M2 interfaces. Marek Vasut's patch for the ifi driver
fix transmitter delay calculation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2017-11-08
The following series includes some fixes for mlx5 core and etherent
driver.
Sorry for the late submission but as you can see i have some very
critical fixes below that i would like them merged into this RC.
Please pull and let me know if there is any problem.
For -stable:
('net/mlx5e: Set page to null in case dma mapping fails') kernels >= 4.13
('net/mlx5: FPGA, return -EINVAL if size is zero') kernels >= 4.13
('net/mlx5: Cancel health poll before sending panic teardown command') kernels >= 4.13
V1->V2:
- Fix Reviewed-by tag of the 2nd patch.
- Drop the FPGA 0 size fix, it needs some more change log info.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After refcnt reaches zero, vlan_vid_del() could free
dev->vlan_info via RCU:
RCU_INIT_POINTER(dev->vlan_info, NULL);
call_rcu(&vlan_info->rcu, vlan_info_rcu_free);
However, the pointer 'grp' still points to that memory
since it is set before vlan_vid_del():
vlan_info = rtnl_dereference(dev->vlan_info);
if (!vlan_info)
goto out;
grp = &vlan_info->grp;
Depends on when that RCU callback is scheduled, we could
trigger a use-after-free in vlan_group_for_each_dev()
right following this vlan_vid_del().
Fix it by moving vlan_vid_del() before setting grp. This
is also symmetric to the vlan_vid_add() we call in
vlan_device_event().
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: efc73f4bbc ("net: Fix memory leak - vlan_info struct")
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Last minute upstream update to one of the UAPI headers - sync it with tooling,
to address this warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current code does not return after successfully preparing the VLAN
addition on every ports member of a it. Fix this.
Fixes: 1ca4aa9cd4 ("net: dsa: check VLAN capability of every switch")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code does not return after successfully preparing the MDB
addition on every ports member of a multicast group. Fix this.
Fixes: a1a6b7ea7f ("net: dsa: add cross-chip multicast support")
Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJaBbFwAAoJEEp/3jgCEfOLYKAH/iB9iIJigf/Khv4S/iKp8hw0
q8kXPfSis2LCYWQjXnPtz1/f9vidiRRb5tw76sInn/hHgzbvGb4nWcGQV3zz0BqF
MOZmJxPzsDH3NUNZ5m5qHFAQpP+hm3I+6JeuQh1DshZOitI0BtGmQ5cnRW7pL+Ny
PZHCXonTtuUcURI6YTW43zh0XqlBdmZe9MUlSLQkKhsW+VRQXenz51a7KO64muoG
KxiVXewpgWHARQ27ck1xTBAQdTUZ14w0hjTH7FsqdMT5O7kCUzEgWl/zcQUs+Kxg
0j8fIsxrxYVT5Wya02y+1OkpoLfavR7resxnPwdZ1e9/QubfbK8OjtrSF87uwh0=
=wJA0
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client
Pull ceph gix from Ilya Dryomov:
"Memory allocation flags fix, marked for stable"
* tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client:
rbd: use GFP_NOIO for parent stat and data requests
Pull input layer updates from Dmitry Torokhov:
- a new ACPI ID for Elan touchpad found in yet another Ideapad model
- Synaptics RMI4 will allow binding to controllers reporting SMB
version 3 (note that we are not adding any new ACPI IDs to the
Synaptics PS/2 drover so unless user explicitly enables intertouch
support there is no user-visible change)
- a fixup to TSC 2004/5 touchscreen driver to mark input devices as
"direct" to help userspace identify the type of device they are
dealing with
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3
Input: tsc200x-core - set INPUT_PROP_DIRECT
Input: elan_i2c - add ELAN060C to the ACPI table
If the array is not present, assume all chip selects are native. This
is the standard behavior for SPI masters configured via the device
tree and the behavior of this driver as well when it is configured via
device tree.
This reduces platform data vs DT differences and allows most of the
platform data based boards to remove their chip select arrays.
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <kernel@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Mark Brown <broonie@kernel.org>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the code that requests any chip select GPIOs fails, the cleanup of
spi_bitbang_start() by calling spi_bitbang_stop() is not done. Add this
to the failure path.
Note that spi_bitbang_start() has to be called before requesting GPIOs
because the GPIO data in the spi master is populated when the master is
registed, and that doesn't happen until spi_bitbang_start() is called.
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <kernel@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Mark Brown <broonie@kernel.org>
CC: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver will fail to load if no gpio chip selects are specified,
this patch changes this so that it no longer fails.
It's possible to use all native chip selects, in which case there is
no reason to have a gpio chip select array. This is what happens if
the *optional* device tree property "cs-gpios" is omitted.
The spi core already checks for the absence of gpio chip selects in
the master and assigns any slaves the gpio_cs value of -ENOENT.
Also have the driver respect the standard SPI device tree property "num-cs"
to allow setting the number of chip selects without using cs-gpios.
CC: Mark Brown <broonie@kernel.org>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <kernel@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix PPC HV host crash that can occur as a result of resizing the guest
hashed page table.
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaBc/CAAoJEED/6hsPKofoI5QH/jxfWMsIcDy0iLPFPywKEV0K
bPt2e47qdWAYNByIgw2QSJBJtcay+LsXbheBlxSxsGO61ceK3HkUfr9CfXvRCpjQ
rdZwHArmpZSFTPYOcXfElF2BkJ+1kOZsDphfzrNVwUF3Q0Y+588IGQm1uv2bUKnA
QAzXFXDDzyKhLqknWoacUlM5UyYKmQwBVSfCFTsQBxhk34agIXH92ZYZLLGWJU6H
B+sjNu5plCoeorWK1NqMtOPAXHs7oV7gHxZLtDM6RL7jZVmYAbDA4zCqk/i2Vy4z
ZU1ihPD8QwvGMuJIsPwcC0ojUVwGP7ZMz/F3FhWSR/VzpRe6SU7T7LxMc1ZsGN0=
=8FAZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fix from Radim Krčmář:
"Fix PPC HV host crash that can occur as a result of resizing the guest
hashed page table"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates
A final few MIPS fixes for 4.14:
- Fix BMIPS NULL pointer dereference (4.7)
- Fix AR7 early GPIO init allocation failure (3.19)
- Fix dead serial output on certain AR7 platforms (2.6.35)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAloEwWQACgkQbAtpk944
dnrH0RAAlVxfUnX1NgHEoYlt6cvd9l1rb0n7zi0sy8sGfv4zaI/0QvsyQVnPx5yI
8Fmu4XWPsY8Evb3/sqVR5cIUiW/vC1gi5FRlPLoMzNnkoNpb8N/XSOiMlepAvayE
E3fSgcUNIK5n6ybltWcW2uLPDKganPTkDBcREAQOO+RukaVAMtI+E3O6ndESimfb
wiuaQZ/BSRl81tMaZkgOauHzWa626hzCnTBGHP2DiwAV+XA7Gyfc+WTeO5tnLoUK
yhMITk+umyhpemYfxbnW81d+lzM3LnY6+hsinpwOYBqpF+CmlIy5BlfggTe9C20T
LHxxshsyDusTm6QbMvu01AKLnx/mOthiq5jZIgQhjpjD7do3URnxcQe2bMDhAYZ6
h6rYNuYruE5AXdsjHAAFA6JNQUa3SMisopAjdkM3umhbSOmxfG4BU1ANhHj/HaYf
cj0XcCk4foFcl7/+P2pmlC8IDQoSaw5spxT+glXhhD/BpFwtvb0jx6ovxtKSGE0Z
6soe3fZQdEGvdChsTfNG+sehub1g3s+mkylFlNt5NA8quj/i1Z6XVHUGTK1cFUKS
6EOEdDB5pJfaZKjTpLiGahvV7eiG54pU+cDL0OIOUqo/Nqh6sFv6qzSBWYQtrMM0
i0pvIS2K8AJLl230hgiz5fsqUSslYVRTbygW4bSO8h1h3rnOElE=
=tNHp
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A final few MIPS fixes for 4.14:
- fix BMIPS NULL pointer dereference (4.7)
- fix AR7 early GPIO init allocation failure (3.19)
- fix dead serial output on certain AR7 platforms (2.6.35)"
* tag 'mips_fixes_4.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: AR7: Ensure that serial ports are properly set up
MIPS: AR7: Defer registration of GPIO
MIPS: BMIPS: Fix missing cbr address
Following my recent transition from Imagination Technologies to the=20
reincarnated MIPS company add a .mailmap mapping for my work address,
so that `scripts/get_maintainer.pl' gets it right for past commits.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 941f5f0f6e.
Sadly, it turns out that we really can't just do the cross-CPU IPI to
all CPU's to get their proper frequencies, because it's much too
expensive on systems with lots of cores.
So we'll have to revert this for now, and revisit it using a smarter
model (probably doing one system-wide IPI at open time, and doing all
the frequency calculations in parallel).
Reported-by: WANG Chao <chao.wang@ucloud.cn>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaBRSBAAoJEAx081l5xIa+XDoQAIrNH5h8o72oDls3if5t1ZLx
8aQW7LBFXUvlG8W6hmeT63xSVkDHfLHK5/6QZ96EdSAiUY/pt7mduW54V6xAzYr8
RBtOgAiLY1KQ9p3m0CoO5c9Mids3KcoUpVZlfhdnAETekDCNoWItbRxd3h/sufmN
SJi7LN3Ra1O83IFgeidREdvQlB+1zwaMrH/sxbDDmssSpUBtQon+F2P4/jZxawhO
JZaw0EFWvwNMCbA2415jQrwgkvd9OZfzeaYhzJ5VZtprO6xi9xXmIFknAzrsluwO
WaecwktXOfvZHVYEYpjZmeoP/BcHINGsb7luPW5ee6EznnN5lXgdKNfNtrLwwuoL
MYC+dJcM5203IWEm96iQwfvWCojLsBM7KbH+/1oUWcI/ipoOngebgpdlUUc5q8bd
GkPXXJZVxYL14NiJr6iWx045Hk+KgmeDbEtsHZjiDM6t2PG0V1Q3+iI+oU4AUgc7
Px3IOTqIOZJsS2WGDIAAmWyON3RKnZPc7ewargAJyQaR/GthoPKt/TIhMSz74Lxj
gn8SV0yih+ZDxrUGApkpJZfTNaIYCKbAz/yyP0GWNQIE4XpPPTggpwQgEUn/yzP+
owNn34Iw9QPLBp1sIXglCebaYHmG54PcWjr86I1wY9nIYB/UFwF7AMjRl47Z/4+M
AaDrzESPuVs3MIWSYt4e
=MO5T
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.14-rc9' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Last few patches to wrap up.
Two i915 fixes that are on their way to stable, one vmware black
screen bug, and one const patch that I was going to drop, but it was
clearly a pretty safe one liner"
* tag 'drm-fixes-for-v4.14-rc9' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Deconstruct struct sgt_dma initialiser
drm/i915: Reject unknown syncobj flags
drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue
drm/vmwgfx: constify vmw_fence_ops
The file arch/s390/include/uapi/asm/virtio-ccw.h belongs to the
s390 virtio drivers as well.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Rebooting into a new kernel with kexec fails (system dies) if tried on
a machine that has no-execute support. Reason for this is that the so
called datamover code gets executed with DAT on (MMU is active) and
the page that contains the datamover is marked as non-executable.
Therefore when branching into the datamover an unexpected program
check happens and afterwards the machine is dead.
This can be simply avoided by disabling DAT, which also disables any
no-execute checks, just before the datamover gets executed.
In fact the first thing done by the datamover is to disable DAT. The
code in the datamover that disables DAT can be removed as well.
Thanks to Michael Holzheu and Gerald Schaefer for tracking this down.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 57d7f939e7 ("s390: add no-execute support")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Dan Horák reported the following crash related to transactional execution:
User process fault: interruption code 0013 ilc:3 in libpthread-2.26.so[3ff93c00000+1b000]
CPU: 2 PID: 1 Comm: /init Not tainted 4.13.4-300.fc27.s390x #1
Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
task: 00000000fafc8000 task.stack: 00000000fafc4000
User PSW : 0705200180000000 000003ff93c14e70
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:1 AS:0 CC:2 PM:0 RI:0 EA:3
User GPRS: 0000000000000077 000003ff00000000 000003ff93144d48 000003ff93144d5e
0000000000000000 0000000000000002 0000000000000000 000003ff00000000
0000000000000000 0000000000000418 0000000000000000 000003ffcc9fe770
000003ff93d28f50 000003ff9310acf0 000003ff92b0319a 000003ffcc9fe6d0
User Code: 000003ff93c14e62: 60e0b030 std %f14,48(%r11)
000003ff93c14e66: 60f0b038 std %f15,56(%r11)
#000003ff93c14e6a: e5600000ff0e tbegin 0,65294
>000003ff93c14e70: a7740006 brc 7,3ff93c14e7c
000003ff93c14e74: a7080000 lhi %r0,0
000003ff93c14e78: a7f40023 brc 15,3ff93c14ebe
000003ff93c14e7c: b2220000 ipm %r0
000003ff93c14e80: 8800001c srl %r0,28
There are several bugs with control register handling with respect to
transactional execution:
- on task switch update_per_regs() is only called if the next task has
an mm (is not a kernel thread). This however is incorrect. This
breaks e.g. for user mode helper handling, where the kernel creates
a kernel thread and then execve's a user space program. Control
register contents related to transactional execution won't be
updated on execve. If the previous task ran with transactional
execution disabled then the new task will also run with
transactional execution disabled, which is incorrect. Therefore call
update_per_regs() unconditionally within switch_to().
- on startup the transactional execution facility is not enabled for
the idle thread. This is not really a bug, but an inconsistency to
other facilities. Therefore enable the facility if it is available.
- on fork the new thread's per_flags field is not cleared. This means
that a child process inherits the PER_FLAG_NO_TE flag. This flag can
be set with a ptrace request to disable transactional execution for
the current process. It should not be inherited by new child
processes in order to be consistent with the handling of all other
PER related debugging options. Therefore clear the per_flags field in
copy_thread_tls().
Reported-and-tested-by: Dan Horák <dan@danny.cz>
Fixes: d35339a42d ("s390: add support for transactional memory")
Cc: <stable@vger.kernel.org> # v3.7+
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Make use of the "stack_depth" tracking feature introduced with
commit 8726679a0f ("bpf: teach verifier to track stack depth") for the
s390 JIT, so that stack usage can be reduced.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
-----BEGIN PGP SIGNATURE-----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=EO3y
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20171109' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw update from Cornelia Huck:
"A vfio-ccw bugfix: avoid freeing that which should not be freed."
MFENCE appears to be way slower than a locked instruction - let's use
LOCK ADD unconditionally, as we always did on old 32-bit.
Performance testing results:
perf stat -r 10 -- ./virtio_ring_0_9 --sleep --host-affinity 0 --guest-affinity 0
Before:
0.922565990 seconds time elapsed ( +- 1.15% )
After:
0.578667024 seconds time elapsed ( +- 1.21% )
i.e. about ~60% faster.
Just poking at SP would be the most natural, but if we then read the
value from SP, we get a false dependency which will slow us down.
This was noted in this article:
http://shipilev.net/blog/2014/on-the-fence-with-dependencies/
And is easy to reproduce by sticking a barrier in a small non-inline
function.
So let's use a negative offset - which avoids this problem since we
build with the red zone disabled.
For userspace, use an address just below the redzone.
The one difference between LOCK ADD and MFENCE is that LOCK ADD does
not affect CLFLUSH, previous patches converted all uses of CLFLUSH to
call mb(), such that changes to smp_mb() won't affect it.
Update mb/rmb/wmb() on 32-bit to use the negative offset, too, for
consistency.
As a follow-up, it might be worth considering switching users
of CLFLUSH to another API (e.g. clflush_mb()?) - we will
then be able to convert mb() to smp_mb() again.
Also arguably, GCC should switch to use LOCK ADD for __sync_synchronize().
This might be worth pursuing separately.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: qemu-devel@nongnu.org
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1509118355-4890-1-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currentlly tps_info structure is no longer used. So use the
strobes parameter in tps65218 structure to capture the info.
Fixes: 2dc4940360 (regulator: tps65218: Remove all the compatibles)
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The CANFD transmitter delay calculation formula was updated in the
latest software drop from IFI and improves the behavior of the IFI
CANFD core during bitrate switching. Use the new formula to improve
stability of the CANFD operation.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Markus Marb <markus@marb.org>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the cause of an WARNING indicatng TCP has pending
retransmission in Open state in tcp_fastretrans_alert().
The root cause is a bad interaction between path mtu probing,
if enabled, and the RACK loss detection. Upong receiving a SACK
above the sequence of the MTU probing packet, RACK could mark the
probe packet lost in tcp_fastretrans_alert(), prior to calling
tcp_simple_retransmit().
tcp_simple_retransmit() only enters Loss state if it newly marks
the probe packet lost. If the probe packet is already identified as
lost by RACK, the sender remains in Open state with some packets
marked lost and retransmitted. Then the next SACK would trigger
the warning. The likely scenario is that the probe packet was
lost due to its size or network congestion. The actual impact of
this warning is small by potentially entering fast recovery an
ACK later.
The simple fix is always entering recovery (Loss) state if some
packet is marked lost during path MTU probing.
Fixes: a0370b3f3f ("tcp: enable RACK loss detection to trigger recovery")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reported-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a GSO skb of truesize O is segmented into 2 new skbs of truesize N1
and N2, we want to transfer socket ownership to the new fresh skbs.
In order to avoid expensive atomic operations on a cache line subject to
cache bouncing, we replace the sequence :
refcount_add(N1, &sk->sk_wmem_alloc);
refcount_add(N2, &sk->sk_wmem_alloc); // repeated by number of segments
refcount_sub(O, &sk->sk_wmem_alloc);
by a single
refcount_add(sum_of(N) - O, &sk->sk_wmem_alloc);
Problem is :
In some pathological cases, sum(N) - O might be a negative number, and
syzkaller bot was apparently able to trigger this trace [1]
atomic_t was ok with this construct, but we need to take care of the
negative delta with refcount_t
[1]
refcount_t: saturated; leaking memory.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 8404 at lib/refcount.c:77 refcount_add_not_zero+0x198/0x200 lib/refcount.c:77
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 8404 Comm: syz-executor2 Not tainted 4.14.0-rc5-mm1+ #20
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1c4/0x1e0 kernel/panic.c:546
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177
do_trap_no_signal arch/x86/kernel/traps.c:211 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:260
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310
invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905
RIP: 0010:refcount_add_not_zero+0x198/0x200 lib/refcount.c:77
RSP: 0018:ffff8801c606e3a0 EFLAGS: 00010282
RAX: 0000000000000026 RBX: 0000000000001401 RCX: 0000000000000000
RDX: 0000000000000026 RSI: ffffc900036fc000 RDI: ffffed0038c0dc68
RBP: ffff8801c606e430 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8801d97f5eba R11: 0000000000000000 R12: ffff8801d5acf73c
R13: 1ffff10038c0dc75 R14: 00000000ffffffff R15: 00000000fffff72f
refcount_add+0x1b/0x60 lib/refcount.c:101
tcp_gso_segment+0x10d0/0x16b0 net/ipv4/tcp_offload.c:155
tcp4_gso_segment+0xd4/0x310 net/ipv4/tcp_offload.c:51
inet_gso_segment+0x60c/0x11c0 net/ipv4/af_inet.c:1271
skb_mac_gso_segment+0x33f/0x660 net/core/dev.c:2749
__skb_gso_segment+0x35f/0x7f0 net/core/dev.c:2821
skb_gso_segment include/linux/netdevice.h:3971 [inline]
validate_xmit_skb+0x4ba/0xb20 net/core/dev.c:3074
__dev_queue_xmit+0xe49/0x2070 net/core/dev.c:3497
dev_queue_xmit+0x17/0x20 net/core/dev.c:3538
neigh_hh_output include/net/neighbour.h:471 [inline]
neigh_output include/net/neighbour.h:479 [inline]
ip_finish_output2+0xece/0x1460 net/ipv4/ip_output.c:229
ip_finish_output+0x85e/0xd10 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:238 [inline]
ip_output+0x1cc/0x860 net/ipv4/ip_output.c:405
dst_output include/net/dst.h:459 [inline]
ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124
ip_queue_xmit+0x8c6/0x18e0 net/ipv4/ip_output.c:504
tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1137
tcp_write_xmit+0x663/0x4de0 net/ipv4/tcp_output.c:2341
__tcp_push_pending_frames+0xa0/0x250 net/ipv4/tcp_output.c:2513
tcp_push_pending_frames include/net/tcp.h:1722 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5050 [inline]
tcp_rcv_established+0x8c7/0x18a0 net/ipv4/tcp_input.c:5497
tcp_v4_do_rcv+0x2ab/0x7d0 net/ipv4/tcp_ipv4.c:1460
sk_backlog_rcv include/net/sock.h:909 [inline]
__release_sock+0x124/0x360 net/core/sock.c:2264
release_sock+0xa4/0x2a0 net/core/sock.c:2776
tcp_sendmsg+0x3a/0x50 net/ipv4/tcp.c:1462
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
sock_sendmsg_nosec net/socket.c:632 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:642
___sys_sendmsg+0x31c/0x890 net/socket.c:2048
__sys_sendmmsg+0x1e6/0x5f0 net/socket.c:2138
Fixes: 14afee4b60 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case we are booted via the default boot entry by a generic loader
like grub or OVMF it is necessary to distinguish between a HVM guest
with a device model supporting legacy devices and a PVH guest without
device model.
PVH guests will always have x86_platform.legacy.no_vga set and
x86_platform.legacy.rtc cleared, while both won't be true for HVM
guests.
Test for both conditions in the guest_late_init hook and set xen_pvh
to true if they are met.
Move some of the early PVH initializations to the new hook in order
to avoid duplicated code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: boris.ostrovsky@oracle.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20171109132739.23465-6-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a new guest_late_init callback to the hypervisor_x86 structure. It
will replace the current kvm_guest_init() call which is changed to
make use of the new callback.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kvm@vger.kernel.org
Cc: rkrcmar@redhat.com
Link: http://lkml.kernel.org/r/20171109132739.23465-5-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These two functions are only called by tsc_init(), which is an __init
function during boot time, so mark them __init as well.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1510135792-17429-1-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds support for the following PEAK-System CAN FD interfaces:
PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels)
PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.)
PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels)
PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.)
PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels)
Like the PCAN-PCIe FD interface, all of these boards run the same IP Core
that is able to handle CAN FD (see also http://www.peak-system.com).
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not
drained fast enough (overrun) it's getting mangled. Already received
frames are dropped - the data can't be restored.
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The D_CAN controller doesn't provide a triple sampling mode, so don't set
the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling
triple sampling is a no-op.
Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.6
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
