ioc_adjust_base_vrate() ignored vrate_min when rq_wait_pct indicates that
there is QD contention. The reasoning was that QD depletion always reliably
indicates device saturation and thus it's safe to override user specified
vrate_min. However, this sometimes leads to unnecessary throttling,
especially on really fast devices, because vrate adjustments have delays and
inertia. It also confuses users because the behavior violates the explicitly
specified configuration.
This patch drops the special case handling so that vrate_min is always
applied.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/YIIo1HuyNmhDeiNx@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In command queueing mode, the cache isn't flushed via the mmc_flush_cache()
function, but instead by issuing a CMDQ_TASK_MGMT (CMD48) with a
FLUSH_CACHE opcode. In this path, we need to check if cache has been
enabled, before deciding to flush the cache, along the lines of what's
being done in mmc_flush_cache().
To fix this problem, let's add a new bus ops callback ->cache_enabled() and
implement it for the mmc bus type. In this way, the mmc block device driver
can call it to know whether cache flushing should be done.
Fixes: 1e8e55b670 (mmc: block: Add CQE support)
Cc: stable@vger.kernel.org
Reported-by: Brendan Peter <bpeter@lytx.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Tested-by: Brendan Peter <bpeter@lytx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210425060207.2591-2-avri.altman@wdc.com
Link: https://lore.kernel.org/r/20210425060207.2591-3-avri.altman@wdc.com
[Ulf: Squashed the two patches and made some minor updates]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A minor cleanup to address a clang warning removed an assigned
but unused local variable, but this now caused a gcc warning as
kfifo_out() is annotated to require checking its return code:
In file included from drivers/memstick/host/r592.h:13,
from drivers/memstick/host/r592.c:21:
drivers/memstick/host/r592.c: In function 'r592_flush_fifo_write':
include/linux/kfifo.h:588:1: error: ignoring return value of '__kfifo_uint_must_check_helper' declared with attribute 'warn_unused_result' [-Werror=unused-result]
588 | __kfifo_uint_must_check_helper( \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
589 | ({ \
| ~~~~
590 | typeof((fifo) + 1) __tmp = (fifo); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
591 | typeof(__tmp->ptr) __buf = (buf); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
592 | unsigned long __n = (n); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
593 | const size_t __recsize = sizeof(*__tmp->rectype); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
594 | struct __kfifo *__kfifo = &__tmp->kfifo; \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
595 | (__recsize) ?\
| ~~~~~~~~~~~~~~
596 | __kfifo_out_r(__kfifo, __buf, __n, __recsize) : \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
597 | __kfifo_out(__kfifo, __buf, __n); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
598 | }) \
| ~~~~
599 | )
| ~
drivers/memstick/host/r592.c:367:9: note: in expansion of macro 'kfifo_out'
367 | kfifo_out(&dev->pio_fifo, buffer, 4);
| ^~~~~~~~~
The value was never checked here, and the purpose of the function
is only to flush the contents, so restore the old behavior but
add a cast to void and a comment, which hopefully warns with neither
gcc nor clang now.
If anyone has an idea for how to fix it without ignoring the return
code, that is probably better.
Fixes: 4b00ed3c50 ("memstick: r592: remove unused variable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210421135215.3414589-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
BUG_ON uses unlikely in if(), it can be optimized at compile time.
Usually, the condition in if() is not satisfied. In my opinion,
this can improve the efficiency of the multi-stage pipeline.
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In some cases readahead of more than the read size can help
(to allow parallel i/o of read ahead which can improve performance).
Ceph introduced a mount parameter "rasize" to allow controlling this.
Add mount parameter "rasize" to allow control of amount of readahead
requested of the server. If rasize not set, rasize defaults to
negotiated rsize as before.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For servers which don't support copy_range (SMB3 CopyChunk), the
logging of:
CIFS: VFS: \\server\share refcpy ioctl error -95 getting resume key
can fill the client logs and make debugging real problems more
difficult. Change the -EOPNOTSUPP on copy_range to a "warn once"
Signed-off-by: Steve French <stfrench@microsoft.com>
pfid is being set to tcon->crfid.fid and they are copied in each other
multiple times. Remove the memcopy between same pointers - memory
locations.
Addresses-Coverity: ("Overlapped copy")
Fixes: 9e81e8ff74 ("cifs: return cached_fid from open_shroot")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb3_notify() is called at mount point of CIFS, build_path_from_dentry()
returns the pointer to kmalloc-ed memory with terminating zero (this is
empty FileName to be passed to SMB2 CREATE request). This pointer is assigned
to the `path` variable.
Then `path + 1` (to skip first backslash symbol) is passed to
cifs_convert_path_to_utf16(). This is incorrect for empty path and causes
out-of-bound memory access.
Get rid of this "increase by one". cifs_convert_path_to_utf16() already
contains the check for leading backslash in the path.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212693
CC: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
* rqst[1,2,3] is allocated in vars
* each rqst->rq_iov is also allocated in vars or using pooled memory
SMB2_open_free, SMB2_ioctl_free, SMB2_query_info_free are iterating on
each rqst after vars has been freed (use-after-free), and they are
freeing the kvec a second time (double-free).
How to trigger:
* compile with KASAN
* mount a share
$ smbinfo quota /mnt/foo
Segmentation fault
$ dmesg
==================================================================
BUG: KASAN: use-after-free in SMB2_open_free+0x1c/0xa0
Read of size 8 at addr ffff888007b10c00 by task python3/1200
CPU: 2 PID: 1200 Comm: python3 Not tainted 5.12.0-rc6+ #107
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x130
? SMB2_open_free+0x1c/0xa0
? SMB2_open_free+0x1c/0xa0
kasan_report.cold+0x7f/0x111
? smb2_ioctl_query_info+0x240/0x990
? SMB2_open_free+0x1c/0xa0
SMB2_open_free+0x1c/0xa0
smb2_ioctl_query_info+0x2bf/0x990
? smb2_query_reparse_tag+0x600/0x600
? cifs_mapchar+0x250/0x250
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_strndup_to_utf16+0x12c/0x1c0
? rwlock_bug.part.0+0x60/0x60
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_convert_path_to_utf16+0xf8/0x140
? smb2_check_message+0x6f0/0x6f0
cifs_ioctl+0xf18/0x16b0
? smb2_query_reparse_tag+0x600/0x600
? cifs_readdir+0x1800/0x1800
? selinux_bprm_creds_for_exec+0x4d0/0x4d0
? do_user_addr_fault+0x30b/0x950
? __x64_sys_openat+0xce/0x140
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdcf1f4ba87
Code: b3 66 90 48 8b 05 11 14 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 13 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef1ce7748 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000c018cf07 RCX: 00007fdcf1f4ba87
RDX: 0000564c467c5590 RSI: 00000000c018cf07 RDI: 0000000000000003
RBP: 00007ffef1ce7770 R08: 00007ffef1ce7420 R09: 00007fdcf0e0562b
R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000004018
R13: 0000000000000001 R14: 0000000000000003 R15: 0000564c467c5590
Allocated by task 1200:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7a/0x90
smb2_ioctl_query_info+0x10e/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 1200:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xe5/0x110
slab_free_freelist_hook+0x53/0x130
kfree+0xcc/0x320
smb2_ioctl_query_info+0x2ad/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888007b10c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes inside of
512-byte region [ffff888007b10c00, ffff888007b10e00)
The buggy address belongs to the page:
page:0000000044e14b75 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7b10
head:0000000044e14b75 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffffea000015f500 0000000400000004 ffff888001042c80
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888007b10b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888007b10b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888007b10c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888007b10c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888007b10d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Can aid in making mount problems easier to diagnose
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This makes the errors accessible from userspace via dmesg and
the fs_context fd.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add fs_context param to parsing helpers to be able to log into it in
next patch.
Make some helper static as they are not used outside of fs_context.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This new helper will be used in the fs_context mount option parsing
code. It log errors both in:
* the fs_context log queue for userspace to read
* kernel printk buffer (dmesg, old behaviour)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Emulated via server side copy and setsize for
SMB3 and later. In the future we could compound
this (and/or optionally use DUPLICATE_EXTENTS
if supported by the server).
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Emulated for SMB3 and later via server side copy
and setsize. Eventually this could be compounded.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Needed for the final patch in the directory caching series
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
and clear the timestamp when we receive a lease break.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Needed for subsequent patches in the directory caching
series.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to hold both a reference for the root/superblock as well as the directory that we
are caching. We need to drop these references before we call kill_anon_sb().
At this point, the root and the cached dentries are always the same but this will change
once we start caching other directories as well.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
And use this to only allow to take out a shared handle once the mount has completed and the
sb becomes available.
This will become important in follow up patches where we will start holding a reference to the
directory dentry for the shared handle during the lifetime of the handle.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
These functions will eventually be used to cache any directory, not just the root
so change the names.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the check for the directory path into the open_shroot() function
but still fail for any non-root directories.
This is preparation for later when we will start using the cache also
for other directories than the root.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
instead of doing it in the callsites for open_shroot.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cost is that we might need to flip '/' to '\\' in more than
just the prefix. Needs profiling, but I suspect that we won't
get slowdown on that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
build_path_from_dentry() open-codes dentry_path_raw(). The reason
we can't use dentry_path_raw() in there (and postprocess the
result as needed) is that the callers of build_path_from_dentry()
expect that the object to be freed on cleanup and the string to
be used are at the same address. That's painful, since the path
is naturally built end-to-beginning - we start at the leaf and
go through the ancestors, accumulating the pathname.
Life would be easier if we left the buffer allocation to callers.
It wouldn't be exact-sized buffer, but none of the callers keep
the result for long - it's always freed before the caller returns.
So there's no need to do exact-sized allocation; better use
__getname()/__putname(), same as we do for pathname arguments
of syscalls. What's more, there's no need to do allocation under
spinlocks, so GFP_ATOMIC is not needed.
Next patch will replace the open-coded dentry_path_raw() (in
build_path_from_dentry_optional_prefix()) with calling the real
thing. This patch only introduces wrappers for allocating/freeing
the buffers and switches to new calling conventions:
build_path_from_dentry(dentry, buf)
expects buf to be address of a page-sized object or NULL,
return value is a pathname built inside that buffer on success,
ERR_PTR(-ENOMEM) if buf is NULL and ERR_PTR(-ENAMETOOLONG) if
the pathname won't fit into page. Note that we don't need to
check for failure when allocating the buffer in the caller -
build_path_from_dentry() will do the right thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
As it is, it takes const char * and, in some cases, stores it in
caller's variable that is plain char *. Fortunately, none of the
callers actually proceeded to modify the string via now-non-const
alias, but that's trouble waiting to happen.
It's easy to do properly, anyway...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
strndup(s, strlen(s)) is a highly unidiomatic way to spell strdup(s);
it's *NOT* safer in any way, since strlen() is just as sensitive to
NUL-termination as strdup() is.
strndup() is for situations when you need a copy of a known-sized
substring, not a magic security juju to drive the bad spirits away.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steve French <stfrench@microsoft.com>
While reviewing a patch clarifying locks and locking hierarchy I
realized some locks were unused.
This commit removes old data and code that isn't actually used
anywhere, or hidden in ifdefs which cannot be enabled from the kernel
config.
* The uid/gid trees and associated locks are left-overs from when
uid/sid mapping had an extra caching layer on top of the keyring and
are now unused.
See commit faa65f07d2 ("cifs: simplify id_to_sid and sid_to_id mapping code")
from 2012.
* cifs_oplock_break_ops is a left-over from when slow_work was remplaced
by regular workqueue and is now unused.
See commit 9b64697246 ("cifs: use workqueue instead of slow-work")
from 2010.
* CIFSSMBSetAttrLegacy is SMB1 cruft dealing with some legacy
NT4/Win9x behaviour.
* Remove CONFIG_CIFS_DNOTIFY_EXPERIMENTAL left-overs. This was already
partially removed in 392e1c5dc9 ("cifs: rename and clarify CIFS_ASYNC_OP and CIFS_NO_RESP")
from 2019. Kill it completely.
* Another candidate that was considered but spared is
CONFIG_CIFS_NFSD_EXPORT which has an empty implementation and cannot
be enabled by a config option (although it is listed but disabled with
"BROKEN" as a dep). It's unclear whether this could even function
today in its current form but it has it's own .c file and Kconfig
entry which is a bit more involved to remove and might make a come
back?
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warning:
CC [M] fs/cifs/cifssmb.o
fs/cifs/cifssmb.c: In function ‘CIFSFindNext’:
fs/cifs/cifssmb.c:4636:23: warning: array subscript 1 is above array bounds of ‘char[1]’ [-Warray-bounds]
4636 | pSMB->ResumeFileName[name_len+1] = 0;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
struct cifs_writedata is declared twice.
One is declared at 209th line.
And struct cifs_writedata is defined blew.
The declaration hear is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add missing documentation for open_files and dfscache /proc files.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
This commit doesn't change the logic of SWN.
Add dummy implementation of SWN functions when SWN is disabled instead
of using ifdef sections.
The dummy functions get optimized out, this leads to clearer code and
compile time type-checking regardless of config options with no
runtime penalty.
Leave the simple ifdefs section as-is.
A single bitfield (bool foo:1) on its own will use up one int. Move
tcon->use_witness out of ifdefs with the other tcon bitfields.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
[MS-SMB2] protocol specification was recently updated to include
new flags, new negotiate context and some minor changes to fields.
Update smb2pdu.h structure definitions to match the newest version
of the protocol specification. Updates to the compression context
values will be in a followon patch.
Signed-off-by: Steve French <stfrench@microsoft.com>
A few of the semaphores had been removed, and one additional one
needed to be noted in the comments.
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the following gcc warning:
fs/cifs/cifsacl.c:1097:8: warning: variable ‘nmode’ set but not used
[-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Fix potential NULL pointer dereference in the auxtrace option parser.
- Fix access to PID in an array when setting a PID filter in 'perf ftrace'.
- Fix error return code in the 'perf data' tool and in maps__clone(),
found using a static analysis tool from Huawei.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYIV2gQAKCRCyPKLppCJ+
JxlaAP9OUoT+/2lsgnMcU5b+m18TNR4RSTZwfmPszpeyOlfaEgD/YDB8OErUA5VT
VxtLeyOisker3EwZFHzYhN7hxqh9sgU=
=wvGY
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix potential NULL pointer dereference in the auxtrace option parser
- Fix access to PID in an array when setting a PID filter in 'perf ftrace'
- Fix error return code in the 'perf data' tool and in maps__clone(),
found using a static analysis tool from Huawei
* tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf map: Fix error return code in maps__clone()
perf ftrace: Fix access to pid in array when setting a pid filter
perf auxtrace: Fix potential NULL pointer dereference
perf data: Fix error return code in perf_data__create_dir()
- Fix a panic when initializing perf uncore machinery on HSW and BDW servers
-----BEGIN PGP SIGNATURE-----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=H1RU
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Fix Broadwell Xeon's stepping in the PEBS isolation table of CPUs
- Fix a panic when initializing perf uncore machinery on Haswell and
Broadwell servers
* tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
Otherwise io_wq_worker_{running,sleeping}() may dereference an
invalid pointer (in future). Currently all users of create_io_thread()
are fine and get task->pf_io_worker = NULL implicitly from the
wq_manager, which got it either from the userspace thread
of the sq_thread, which explicitly reset it to NULL.
I think it's safer to always reset it in order to avoid future
problems.
Fixes: 3bfe610669 ("io-wq: fork worker threads from original task")
cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
