Commit Graph

365 Commits

Author SHA1 Message Date
Jiapeng Chong
9c95bc25ad tick/sched: Fix non-kernel-doc comment
Fixes the following W=1 kernel build warning:

kernel/time/tick-sched.c:1563: warning: This comment starts with '/**',
but isn't a kernel-doc comment.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220214084739.63228-1-jiapeng.chong@linux.alibaba.com
2022-04-10 12:23:34 +02:00
Paul Gortmaker
40e97e4296 tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
While running some testing on code that happened to allow the variable
tick_nohz_full_running to get set but with no "possible" NOHZ cores to
back up that setting, this warning triggered:

        if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
                WARN_ON(tick_nohz_full_running);

The console was overwhemled with an endless stream of one WARN per tick
per core and there was no way to even see what was going on w/o using a
serial console to capture it and then trace it back to this.

Change it to WARN_ON_ONCE().

Fixes: 08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211206145950.10927-3-paul.gortmaker@windriver.com
2022-04-10 12:23:34 +02:00
Frederic Weisbecker
0345691b24 tick/rcu: Stop allowing RCU_SOFTIRQ in idle
RCU_SOFTIRQ used to be special in that it could be raised on purpose
within the idle path to prevent from stopping the tick. Some code still
prevents from unnecessary warnings related to this specific behaviour
while entering in dynticks-idle mode.

However the nohz layout has changed quite a bit in ten years, and the
removal of CONFIG_RCU_FAST_NO_HZ has been the final straw to this
safe-conduct. Now the RCU_SOFTIRQ vector is expected to be raised from
sane places.

A remaining corner case is admitted though when the vector is invoked
in fragile hotplug path.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
2022-03-07 23:01:34 +01:00
Frederic Weisbecker
2984539959 tick/rcu: Remove obsolete rcu_needs_cpu() parameters
With the removal of CONFIG_RCU_FAST_NO_HZ, the parameters in
rcu_needs_cpu() are not necessary anymore. Simply remove them.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
2022-03-07 23:01:26 +01:00
Frederic Weisbecker
a1ff03cd6f tick: Detect and fix jiffies update stall
On some rare cases, the timekeeper CPU may be delaying its jiffies
update duty for a while. Known causes include:

* The timekeeper is waiting on stop_machine in a MULTI_STOP_DISABLE_IRQ
  or MULTI_STOP_RUN state. Disabled interrupts prevent from timekeeping
  updates while waiting for the target CPU to complete its
  stop_machine() callback.

* The timekeeper vcpu has VMEXIT'ed for a long while due to some overload
  on the host.

Detect and fix these situations with emergency timekeeping catchups.

Original-patch-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2022-03-07 23:01:19 +01:00
Frederic Weisbecker
53e87e3cdc timers/nohz: Last resort update jiffies on nohz_full IRQ entry
When at least one CPU runs in nohz_full mode, a dedicated timekeeper CPU
is guaranteed to stay online and to never stop its tick.

Meanwhile on some rare case, the dedicated timekeeper may be running
with interrupts disabled for a while, such as in stop_machine.

If jiffies stop being updated, a nohz_full CPU may end up endlessly
programming the next tick in the past, taking the last jiffies update
monotonic timestamp as a stale base, resulting in an tick storm.

Here is a scenario where it matters:

0) CPU 0 is the timekeeper and CPU 1 a nohz_full CPU.

1) A stop machine callback is queued to execute somewhere.

2) CPU 0 reaches MULTI_STOP_DISABLE_IRQ while CPU 1 is still in
   MULTI_STOP_PREPARE. Hence CPU 0 can't do its timekeeping duty. CPU 1
   can still take IRQs.

3) CPU 1 receives an IRQ which queues a timer callback one jiffy forward.

4) On IRQ exit, CPU 1 schedules the tick one jiffy forward, taking
   last_jiffies_update as a base. But last_jiffies_update hasn't been
   updated for 2 jiffies since the timekeeper has interrupts disabled.

5) clockevents_program_event(), which relies on ktime_get(), observes
   that the expiration is in the past and therefore programs the min
   delta event on the clock.

6) The tick fires immediately, goto 3)

7) Tick storm, the nohz_full CPU is drown and takes ages to reach
   MULTI_STOP_DISABLE_IRQ, which is the only way out of this situation.

Solve this with unconditionally updating jiffies if the value is stale
on nohz_full IRQ entry. IRQs and other disturbances are expected to be
rare enough on nohz_full for the unconditional call to ktime_get() to
actually matter.

Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20211026141055.57358-2-frederic@kernel.org
2021-12-02 15:07:22 +01:00
Linus Torvalds
9269d27e51 Updates to the tick/nohz code in this cycle:
- Micro-optimize tick_nohz_full_cpu()
 
  - Optimize idle exit tick restarts to be less eager
 
  - Optimize tick_nohz_dep_set_task() to only wake up
    a single CPU. This reduces IPIs and interruptions
    on nohz_full CPUs.
 
  - Optimize tick_nohz_dep_set_signal() in a similar
    fashion.
 
  - Skip IPIs in tick_nohz_kick_task() when trying
    to kick a non-running task.
 
  - Micro-optimize tick_nohz_task_switch() IRQ flags
    handling to reduce context switching costs.
 
  - Misc cleanups and fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmDZcycRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jItRAAn1/vI0+pWQWjyWQ+CL8AMNNWTbtBpC7W
 ZUR+IEtEoYEufYXH9RgcweIgopBExVlC9CWzUX5o7AuVdN2YyzcBuQbza4vlYeIm
 azcdIlKCwjdgODJBTgHNH7IR0QKF/Gq+fVCGX3Xc37BlyD389CQ33HXC7X2JZLB3
 Mb5wxAJoZ2HQzGGJoz4JyA0rl6lY3jYzLMK7mqxkUqIqT45xLpgw5+imRM2J1ddV
 d/73P4TwFY+E8KXSLctUfgmkmCzJYISGSlH49jX3CkwAktwTY17JjWjxT9Z5b2D8
 6TTpsDoLtI4tXg0U2KsBxBoDHK/a4hAwo+GnE/RMT6ghqaX5IrANrgtTVPBN9dvh
 qUGVAMHVDN3Ed7wwFvCm4tPUz/iXzBsP8xPl28WPHsyV9BE9tcrk2ynzSWy47Twd
 z1GVZDNTwCfdvH62WS/HvbPdGl2hHH5/oe3HaF1ROLPHq8UzaxwKEX+A0rwLJrBp
 ZU8Lnvu3rPVa5cHc4z1AE7sbX7OkTTNjxY/qQzDhNKwVwfkaPcBiok9VgEIEGS7A
 n3U/yuQCn307sr7SlJ6z4yu3YCw3aEJ3pTxUprmNTh3+x4yF5ZaOimqPyvzBaUVM
 Hm3LYrxHIScisFJio4FiC2dghZryM37RFonvqrCAOuA+afMU2GOFnaoDruXU27SE
 tqxR6c/hw+4=
 =18pN
 -----END PGP SIGNATURE-----

Merge tag 'timers-nohz-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timers/nohz updates from Ingo Molnar:

 - Micro-optimize tick_nohz_full_cpu()

 - Optimize idle exit tick restarts to be less eager

 - Optimize tick_nohz_dep_set_task() to only wake up a single CPU.
   This reduces IPIs and interruptions on nohz_full CPUs.

 - Optimize tick_nohz_dep_set_signal() in a similar fashion.

 - Skip IPIs in tick_nohz_kick_task() when trying to kick a
   non-running task.

 - Micro-optimize tick_nohz_task_switch() IRQ flags handling to
   reduce context switching costs.

 - Misc cleanups and fixes

* tag 'timers-nohz-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add myself as context tracking maintainer
  tick/nohz: Call tick_nohz_task_switch() with interrupts disabled
  tick/nohz: Kick only _queued_ task whose tick dependency is updated
  tick/nohz: Change signal tick dependency to wake up CPUs of member tasks
  tick/nohz: Only wake up a single target cpu when kicking a task
  tick/nohz: Update nohz_full Kconfig help
  tick/nohz: Update idle_exittime on actual idle exit
  tick/nohz: Remove superflous check for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
  tick/nohz: Conditionally restart tick on idle exit
  tick/nohz: Evaluate the CPU expression after the static key
2021-06-28 12:22:06 -07:00
Frederic Weisbecker
f268c3737e tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
Checking for and processing RCU-nocb deferred wakeup upon user/guest
entry is only relevant when nohz_full runs on the local CPU, otherwise
the periodic tick should take care of it.

Make sure we don't needlessly pollute these fast-paths as a -3%
performance regression on a will-it-scale.per_process_ops has been
reported so far.

Fixes: 47b8ff194c (entry: Explicitly flush pending rcuog wakeup before last rescheduling point)
Fixes: 4ae7dc97f7 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point)
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210527113441.465489-1-frederic@kernel.org
2021-05-31 10:14:49 +02:00
Peter Zijlstra
0fdcccfafc tick/nohz: Call tick_nohz_task_switch() with interrupts disabled
Call tick_nohz_task_switch() slightly earlier after the context switch
to benefit from disabled IRQs. This way the function doesn't need to
disable them once more.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210512232924.150322-10-frederic@kernel.org
2021-05-13 14:21:23 +02:00
Marcelo Tosatti
a1dfb6311c tick/nohz: Kick only _queued_ task whose tick dependency is updated
When the tick dependency of a task is updated, we want it to aknowledge
the new state and restart the tick if needed. If the task is not
running, we don't need to kick it because it will observe the new
dependency upon scheduling in. But if the task is running, we may need
to send an IPI to it so that it gets notified.

Unfortunately we don't have the means to check if a task is running
in a race free way. Checking p->on_cpu in a synchronized way against
p->tick_dep_mask would imply adding a full barrier between
prepare_task_switch() and tick_nohz_task_switch(), which we want to
avoid in this fast-path.

Therefore we blindly fire an IPI to the task's CPU.

Meanwhile we can check if the task is queued on the CPU rq because
p->on_rq is always set to TASK_ON_RQ_QUEUED _before_ schedule() and its
full barrier that precedes tick_nohz_task_switch(). And if the task is
queued on a nohz_full CPU, it also has fair chances to be running as the
isolation constraints prescribe running single tasks on full dynticks
CPUs.

So use this as a trick to check if we can spare an IPI toward a
non-running task.

NOTE: For the ordering to be correct, it is assumed that we never
deactivate a task while it is running, the only exception being the task
deactivating itself while scheduling out.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-9-frederic@kernel.org
2021-05-13 14:21:22 +02:00
Marcelo Tosatti
1e4ca26d36 tick/nohz: Change signal tick dependency to wake up CPUs of member tasks
Rather than waking up all nohz_full CPUs on the system, only wake up
the target CPUs of member threads of the signal.

Reduces interruptions to nohz_full CPUs.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-8-frederic@kernel.org
2021-05-13 14:21:22 +02:00
Frederic Weisbecker
29721b8592 tick/nohz: Only wake up a single target cpu when kicking a task
When adding a tick dependency to a task, its necessary to
wake up the CPU where the task resides to reevaluate tick
dependencies on that CPU.

However the current code wakes up all nohz_full CPUs, which
is unnecessary.

Switch to waking up a single CPU, by using ordering of writes
to task->cpu and task->tick_dep_mask.

[ mingo: Minor readability edit. ]

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-7-frederic@kernel.org
2021-05-13 14:21:22 +02:00
Yunfeng Ye
96c9b90396 tick/nohz: Update idle_exittime on actual idle exit
The idle_exittime field of tick_sched is used to record the time when
the idle state was left. but currently the idle_exittime is updated in
the function tick_nohz_restart_sched_tick(), which is not always in idle
state when nohz_full is configured:

  tick_irq_exit
    tick_nohz_irq_exit
      tick_nohz_full_update_tick
        tick_nohz_restart_sched_tick
          ts->idle_exittime = now;

It's thus overwritten by mistake on nohz_full tick restart. Move the
update to the appropriate idle exit path instead.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-5-frederic@kernel.org
2021-05-13 14:21:21 +02:00
Frederic Weisbecker
3f624314b3 tick/nohz: Remove superflous check for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
The vtime_accounting_enabled_this_cpu() early check already makes what
follows as dead code in the case of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.
No need to keep the ifdeferry around.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-4-frederic@kernel.org
2021-05-13 14:21:21 +02:00
Yunfeng Ye
a5183862e7 tick/nohz: Conditionally restart tick on idle exit
In nohz_full mode, switching from idle to a task will unconditionally
issue a tick restart. If the task is alone in the runqueue or is the
highest priority, the tick will fire once then eventually stop. But that
alone is still undesired noise.

Therefore, only restart the tick on idle exit when it's strictly
necessary.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210512232924.150322-3-frederic@kernel.org
2021-05-13 14:21:21 +02:00
Linus Torvalds
5469f160e6 Power management updates for 5.13-rc1
- Add idle states table for IceLake-D to the intel_idle driver and
    update IceLake-X C6 data in it (Artem Bityutskiy).
 
  - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
    drop the unused do_idle() firmware call from it (Dmitry Osipenko).
 
  - Fix cpuidle-qcom-spm Kconfig entry (He Ying).
 
  - Fix handling of possible negative tick_nohz_get_next_hrtimer()
    return values of in cpuidle governors (Rafael Wysocki).
 
  - Add support for frequency-invariance to the ACPI CPPC cpufreq
    driver and update the frequency-invariance engine (FIE) to use it
    as needed (Viresh Kumar).
 
  - Simplify the default delay_us setting in the ACPI CPPC cpufreq
    driver (Tom Saeger).
 
  - Clean up frequency-related computations in the intel_pstate
    cpufreq driver (Rafael Wysocki).
 
  - Fix TBG parent setting for load levels in the armada-37xx
    cpufreq driver and drop the CPU PM clock .set_parent method for
    armada-37xx (Marek Behún).
 
  - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
 
  - Fix handling of dev_pm_opp_of_cpumask_add_table() return values
    in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
    appropriate (Quanyang Wang).
 
  - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
 
  - Drop the unused for_each_policy() macro from cpufreq (Shaokun
    Zhang).
 
  - Simplify computations in the schedutil cpufreq governor to avoid
    unnecessary overhead (Yue Hu).
 
  - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
 
  - Fix cpufreq documentation links in Kconfig (Alexander Monakov).
 
  - Fix PCI device power state handling in pci_enable_device_flags()
    to avoid issuse in some cases when the device depends on an ACPI
    power resource (Rafael Wysocki).
 
  - Add missing documentation of pm_runtime_resume_and_get() (Alan
    Stern).
 
  - Add missing static inline stub for pm_runtime_has_no_callbacks()
    to pm_runtime.h and drop the unused try_to_freeze_nowarn()
    definition (YueHaibing).
 
  - Drop duplicate struct device declaration from pm.h and fix a
    structure type declaration in intel_rapl.h (Wan Jiabing).
 
  - Use dev_set_name() instead of an open-coded equivalent of it in
    the wakeup sources code and drop a redundant local variable
    initialization from it (Andy Shevchenko, Colin Ian King).
 
  - Use crc32 instead of md5 for e820 memory map integrity check
    during resume from hibernation on x86 (Chris von Recklinghausen).
 
  - Fix typos in comments in the system-wide and hibernation support
    code (Lu Jialin).
 
  - Modify the generic power domains (genpd) code to avoid resuming
    devices in the "prepare" phase of system-wide suspend and
    hibernation (Ulf Hansson).
 
  - Add Hygon Fam18h RAPL support to the intel_rapl power capping
    driver (Pu Wen).
 
  - Add MAINTAINERS entry for the dynamic thermal power management
    (DTPM) code (Daniel Lezcano).
 
  - Add devm variants of operating performance points (OPP) API
    functions and switch over some users of the OPP framework to
    the new resource-managed API (Yangtao Li and Dmitry Osipenko).
 
  - Update devfreq core:
 
    * Register devfreq devices as cooling devices on demand (Daniel
      Lezcano).
 
    * Add missing unlock opeation in devfreq_add_device() (Lukasz
      Luba).
 
    * Use the next frequency as resume_freq instead of the previous
      frequency when using the opp-suspend property (Dong Aisheng).
 
    * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
 
    * Fix set_freq path for the userspace governor in Kconfig (Dong
      Aisheng).
 
    * Remove invalid description of get_target_freq() (Dong Aisheng).
 
  - Update devfreq drivers:
 
    * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
      of_match_ptr() (Dong Aisheng, Fabio Estevam).
 
    * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
      references to undefined symbols (Enric Balletbo i Serra, Gaël
      PORTAY).
 
    * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
      Kozlowski).
 
    * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
 
  - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
 
  - Fix typo in the pm-graph utility code (Ricardo Ribalda).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmCHAUISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxAxMP/0tFjgxeaJ3chYaiqoPlk2QX/XdwqJvm
 8OOu2qBMWbt2bubcIlAPpdlCNaERI4itF7E8za7t9alswdq7YPWGmNR9snCXUKhD
 BzERuicZTeOcCk2P3DTgzLVc4EzF6wutA3lTdYYZIpf+LuuB+guG8zgMzScRHIsM
 N3I83O+iLTA9ifIqN0/wH//a0ISvo6rSWtcbx+48d5bYvYixW7CsBmoxWHhGiYsw
 4PJ4AzbdNJEhQp91SBYPIAmqwV88FZUPoYnRazXMxOSevMewhP9JuCHXAujC3gLV
 l5d2TBaBV4EBYLD5tfCpJvHMXhv/yBpg6KRivjri+zEnY1TAqIlfR4vYiL7puVvQ
 PdwjyvNFDNGyUSX/AAwYF6F4WCtIhw8hCahw6Dw2zcDz0plFdRZmWAiTdmIjECJK
 8EvwJNlmdl27G1y+EBc6NnwzEFZQwiu9F5bUHUkmc3fF1M1aFTza8WDNDo30TC94
 94c+uVBRL2fBePl4FfGZATfJbOMb8+vDIkroQxrIjQDT/7Ha3Mz75JZDRHItZo92
 +4fES2eFdfZISCLIQMBY5TeXox3O8qsirC1k4qELwy71gPUE9CpP3FkxKIvyZLlv
 +6fS9ttpUfyFBF7gqrEy+ziVk1Rm4oorLmWCtthz4xyerzj5+vtZQqKzcySk0GA5
 hYkseZkedR6y
 =t+SG
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...
2021-04-26 15:10:25 -07:00
Linus Torvalds
87dcebff92 The time and timers updates contain:
Core changes:
 
    - Allow runtime power management when the clocksource is changed.
 
    - A correctness fix for clock_adjtime32() so that the return value
      on success is not overwritten by the result of the copy to user.
 
    - Allow late installment of broadcast clockevent devices which was
      broken because nothing switched them over to oneshot mode. This went
      unnoticed so far because clockevent devices used to be built in, but
      now people started to make them modular.
 
    - Debugfs related simplifications
 
    - Small cleanups and improvements here and there
 
 Driver changes:
 
    - The usual set of device tree binding updates for a wide range
      of drivers/devices.
 
    - The usual updates and improvements for drivers all over the place but
      nothing outstanding.
 
    - No new clocksource/event drivers. They'll come back next time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmCGieYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYobRJEACNCtecUXdyt/u+ViDgHwG1XOHSZUkG
 zBO6E/uZ3G6ZUkr6FogAaY2eMMrSdSUyqbiNBSYBJki2ptMJWF5Li5VzqINmrBuD
 VyjK3FEDV0bXW9EJOm4d+95pMyFQ/pYv9VPcByj7VW21t+IDE/4pLeZ8M8shNDHa
 pmMnR/tgX4ZZtSrX2NqCUNoTrkycaz8d5NOuso5HjKvPkJ5BU2kSxULTGmvaeTil
 8d+70AetApDgzAWpCnJFPlLlOHIPyhnMxS5edvsMIbMIkRLsnI+b3LsPZe+CqVZ0
 zaP6KYvG+iqU8nKdz7OweV1fLgBD52GKgHlpTkhhYs3GW4XBEXDrsyoEyeIiZ22u
 YUkTzFvZ4JG/+80UUaKpLDIGYWUj1h+xe/EtWS0s8lj108RsNLghd/0YjFMikspT
 fYC2WpaXJDz3URbSV57OXGbwhg2zOYI5Supg6wNrmFfcld3k6CSitG4idDpIGjJE
 8WIcZmeZSelDufskiY8RmsiTumqNOf5P33F71r9JRI6QU9RsyYb3fJN71AFKnLq2
 31YEAShpzPYG5EGRinPymJRi3icdmcEQECz/pWUb6ua0s/HG1+HD9emLwHzvPdul
 hcWRq19GaK1YBzOfV60+8cdxW8ZEOROvRVdYJO8FoYcnueUJmOSM+boqSkRtDw3o
 RywO8BetxukPJg==
 =F6Du
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "The time and timers updates contain:

  Core changes:

   - Allow runtime power management when the clocksource is changed.

   - A correctness fix for clock_adjtime32() so that the return value on
     success is not overwritten by the result of the copy to user.

   - Allow late installment of broadcast clockevent devices which was
     broken because nothing switched them over to oneshot mode. This
     went unnoticed so far because clockevent devices used to be built
     in, but now people started to make them modular.

   - Debugfs related simplifications

   - Small cleanups and improvements here and there

  Driver changes:

   - The usual set of device tree binding updates for a wide range of
     drivers/devices.

   - The usual updates and improvements for drivers all over the place
     but nothing outstanding.

   - No new clocksource/event drivers. They'll come back next time"

* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  posix-timers: Preserve return value in clock_adjtime32()
  tick/broadcast: Allow late registered device to enter oneshot mode
  tick: Use tick_check_replacement() instead of open coding it
  time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
  dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
  clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
  clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
  clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
  clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
  clocksource/drivers/npcm: Add support for WPCM450
  clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
  clocksource/drivers/pistachio: Fix trivial typo
  clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
  clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
  clocksource/drivers/timer-ti-dm: Fix posted mode status check order
  dt-bindings: timer: renesas,cmt: Document R8A77961
  dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
  clocksource/drivers/ingenic-ost: Add support for the JZ4760B
  clocksource/drivers/ingenic: Add support for the JZ4760
  dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
  ...
2021-04-26 09:54:03 -07:00
Rafael J. Wysocki
4c81cb7e64 tick/nohz: Improve tick_nohz_get_next_hrtimer() kerneldoc
Make the tick_nohz_get_next_hrtimer() kerneldoc comment state clearly
that the function may return negative numbers.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07 19:26:44 +02:00
Ingo Molnar
4bf07f6562 timekeeping, clocksource: Fix various typos in comments
Fix ~56 single-word typos in timekeeping & clocksource code comments.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org
2021-03-22 23:06:48 +01:00
Thomas Gleixner
47c218dcae tick/sched: Prevent false positive softirq pending warnings on RT
On RT a task which has soft interrupts disabled can block on a lock and
schedule out to idle while soft interrupts are pending. This triggers the
warning in the NOHZ idle code which complains about going idle with pending
soft interrupts. But as the task is blocked soft interrupt processing is
temporarily blocked as well which means that such a warning is a false
positive.

To prevent that check the per CPU state which indicates that a scheduled
out task has soft interrupts disabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210309085727.527563866@linutronix.de
2021-03-17 16:34:11 +01:00
Linus Torvalds
2eeefc60ad Update/fix two CPU sanity checks in the hotplug and the boot code,
and fix a typo in the Kconfig help text.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl/oUUkRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1gEnQ//Ud8SF9fOq2w7IVqYYQadH9BSj6jFOTlb
 5/pgRKZLI6OCRZ8Wkx9lV3hvlmyZRtKhuLcOx/LR/TXNBlIN7wfkRcjPFIojhqM3
 G5mr/TMmbL+PSOz8gEWwPsz7A+pDgoDDdvgId3Dn6CUKEZLIcf2tEzIOBjtST94b
 svS5Y/wBe3xzlBD4yfNKkmwSYlgpDv7ZfAF3q38h3dTgb3nTYRgfKmflKe+aBf7z
 iy05I/j7Hw8WmioG0oEUfX9t/j9dYdGzbK/3S8UV4igXj+i+XnzUIs9+dQpEpByS
 tgS9KJbq8AYtuUdHU7xInG2ltrODrriJUdCQpzi65/jEUshoBLw+Dj3fmVKHJA48
 LW0jgQ7eJm8dkkJyo7+s4Z5wTmS6zzqJ+2MZq34fvlHQFzHgJ3KAwTzoiqBLx4FY
 1H/KEmK8hX2IDiJj5qrWHcZRmGiKbeKxiJkB0+6EQGj+aAVy3A6AR2TeQJf58OSN
 nc+e7UWQFEumGyEN8cVTjdTuLJc1iY9ULpXuQfdi4ksDCpLMTMWk9V9psWB+pC15
 MTqbsJCzJU4oeeYaZVWdMPcaZSjgg4Ar3ojvXvPoUkdqCuvnMPoBxTVXjkwNReZF
 SxFIpYyKbSkZiN/FOZkICIh0tRMWLmMVNqXV0rjEi41BvcoH9tKXT2y5WgQEHvf1
 BctV+BFfblU=
 =T0Y6
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fixes from Ingo Molnar:
 "Update/fix two CPU sanity checks in the hotplug and the boot code, and
  fix a typo in the Kconfig help text.

  [ Context: the first two commits are the result of an ongoing
    annotation+review work of (intentional) tick_do_timer_cpu() data
    races reported by KCSAN, but the annotations aren't fully cooked
    yet ]"

* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
  tick/sched: Remove bogus boot "safety" check
  tick: Remove pointless cpu valid check in hotplug code
2020-12-27 09:03:41 -08:00
Thomas Gleixner
ba8ea8e7dd tick/sched: Remove bogus boot "safety" check
can_stop_idle_tick() checks whether the do_timer() duty has been taken over
by a CPU on boot. That's silly because the boot CPU always takes over with
the initial clockevent device.

But even if no CPU would have installed a clockevent and taken over the
duty then the question whether the tick on the current CPU can be stopped
or not is moot. In that case the current CPU would have no clockevent
either, so there would be nothing to keep ticking.

Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20201206212002.725238293@linutronix.de
2020-12-16 11:26:27 +01:00
Linus Torvalds
adb35e8dc9 Scheduler updates:
- migrate_disable/enable() support which originates from the RT tree and
    is now a prerequisite for the new preemptible kmap_local() API which aims
    to replace kmap_atomic().
 
  - A fair amount of topology and NUMA related improvements
 
  - Improvements for the frequency invariant calculations
 
  - Enhanced robustness for the global CPU priority tracking and decision
    making
 
  - The usual small fixes and enhancements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XwK4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoX28D/9cVrvziSQGfBfuQWnUiw8iOIq1QBa2
 Me+Tvenhfrlt7xU6rbP9ciFu7eTN+fS06m5uQPGI+t22WuJmHzbmw1bJVXfkvYfI
 /QoU+Hg7DkDAn1p7ZKXh0dRkV0nI9ixxSHl0E+Zf1ATBxCUMV2SO85flg6z/4qJq
 3VWUye0dmR7/bhtkIjv5rwce9v2JB2g1AbgYXYTW9lHVoUdGoMSdiZAF4tGyHLnx
 sJ6DMqQ+k+dmPyYO0z5MTzjW/fXit4n9w2e3z9TvRH/uBu58WSW1RBmQYX6aHBAg
 dhT9F4lvTs6lJY23x5RSFWDOv6xAvKF5a0xfb8UZcyH5EoLYrPRvm42a0BbjdeRa
 u0z7LbwIlKA+RFdZzFZWz8UvvO0ljyMjmiuqZnZ5dY9Cd80LSBuxrWeQYG0qg6lR
 Y2povhhCepEG+q8AXIe2YjHKWKKC1s/l/VY3CNnCzcd21JPQjQ4Z5eWGmHif5IED
 CntaeFFhZadR3w02tkX35zFmY3w4soKKrbI4EKWrQwd+cIEQlOSY7dEPI/b5BbYj
 MWAb3P4EG9N77AWTNmbhK4nN0brEYb+rBbCA+5dtNBVhHTxAC7OTWElJOC2O66FI
 e06dREjvwYtOkRUkUguWwErbIai2gJ2MH0VILV3hHoh64oRk7jjM8PZYnjQkdptQ
 Gsq0rJW5iiu/OQ==
 =Oz1V
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Thomas Gleixner:

 - migrate_disable/enable() support which originates from the RT tree
   and is now a prerequisite for the new preemptible kmap_local() API
   which aims to replace kmap_atomic().

 - A fair amount of topology and NUMA related improvements

 - Improvements for the frequency invariant calculations

 - Enhanced robustness for the global CPU priority tracking and decision
   making

 - The usual small fixes and enhancements all over the place

* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
  sched/fair: Trivial correction of the newidle_balance() comment
  sched/fair: Clear SMT siblings after determining the core is not idle
  sched: Fix kernel-doc markup
  x86: Print ratio freq_max/freq_base used in frequency invariance calculations
  x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
  x86, sched: Calculate frequency invariance for AMD systems
  irq_work: Optimize irq_work_single()
  smp: Cleanup smp_call_function*()
  irq_work: Cleanup
  sched: Limit the amount of NUMA imbalance that can exist at fork time
  sched/numa: Allow a floating imbalance between NUMA nodes
  sched: Avoid unnecessary calculation of load imbalance at clone time
  sched/numa: Rename nr_running and break out the magic number
  sched: Make migrate_disable/enable() independent of RT
  sched/topology: Condition EAS enablement on FIE support
  arm64: Rebuild sched domains on invariance status changes
  sched/topology,schedutil: Wrap sched domains rebuild
  sched/uclamp: Allow to reset a task uclamp constraint value
  sched/core: Fix typos in comments
  Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
  ...
2020-12-14 18:29:11 -08:00
Thomas Gleixner
aa3b66f401 tick/sched: Make jiffies update quick check more robust
The quick check in tick_do_update_jiffies64() whether jiffies need to be
updated is not really correct under all circumstances and on all
architectures, especially not on 32bit systems.

The quick check does:

    if (now < READ_ONCE(tick_next_period))
    	return;

and the counterpart in the update is:

    WRITE_ONCE(tick_next_period, next_update_time);

This has two problems:

  1) On weakly ordered architectures there is no guarantee that the stores
     before the WRITE_ONCE() are visible which means that other CPUs can
     operate on a stale jiffies value.

  2) On 32bit the store of tick_next_period which is an u64 is split into
     two 32bit stores. If the first 32bit store advances tick_next_period
     far out and the second 32bit store is delayed (virt, NMI ...) then
     jiffies will become stale until the second 32bit store happens.

Address this by seperating the handling for 32bit and 64bit.

On 64bit problem #1 is addressed by replacing READ_ONCE() / WRITE_ONCE()
with smp_load_acquire() / smp_store_release().

On 32bit problem #2 is addressed by protecting the quick check with the
jiffies sequence counter. The load and stores can be plain because the
sequence count mechanics provides the required barriers already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87czzpc02w.fsf@nanos.tec.linutronix.de
2020-12-11 23:19:10 +01:00
Peter Zijlstra
7a9f50a058 irq_work: Cleanup
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-24 16:47:48 +01:00
Thomas Gleixner
b996544916 tick: Get rid of tick_period
The variable tick_period is initialized to NSEC_PER_TICK / HZ during boot
and never updated again.

If NSEC_PER_TICK is not an integer multiple of HZ this computation is less
accurate than TICK_NSEC which has proper rounding in place.

Aside of the inaccuracy there is no reason for having this variable at
all. It's just a pointless indirection and all usage sites can just use the
TICK_NSEC constant.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.766643526@linutronix.de
2020-11-19 10:48:29 +01:00
Yunfeng Ye
896b969e67 tick/sched: Release seqcount before invoking calc_load_global()
calc_load_global() does not need the sequence count protection.

[ tglx: Split it up properly and added comments ]

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.660902274@linutronix.de
2020-11-19 10:48:29 +01:00
Thomas Gleixner
7a35bf2a6a tick/sched: Optimize tick_do_update_jiffies64() further
Now that it's clear that there is always one tick to account, simplify the
calculations some more.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.565663056@linutronix.de
2020-11-19 10:48:29 +01:00
Yunfeng Ye
94ad2e3ced tick/sched: Reduce seqcount held scope in tick_do_update_jiffies64()
If jiffies are up to date already (caller lost the race against another
CPU) there is no point to change the sequence count. Doing that just forces
other CPUs into the seqcount retry loop in tick_nohz_next_event() for
nothing.

Just bail out early.

[ tglx: Rewrote most of it ]

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.462195901@linutronix.de
2020-11-19 10:48:29 +01:00
Thomas Gleixner
372acbbaa8 tick/sched: Use tick_next_period for lockless quick check
No point in doing calculations.

   tick_next_period = last_jiffies_update + tick_period

Just check whether now is before tick_next_period to figure out whether
jiffies need an update.

Add a comment why the intentional data race in the quick check is safe or
not so safe in a 32bit corner case and why we don't worry about it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.337366695@linutronix.de
2020-11-19 10:48:29 +01:00
Thomas Gleixner
c398960cd8 tick: Document protections for tick related data
The protection rules for tick_next_period and last_jiffies_update are blury
at best. Clarify this.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201117132006.197713794@linutronix.de
2020-11-19 10:48:28 +01:00
Paul E. McKenney
bca37119c5 tick-sched: Clarify "NOHZ: local_softirq_pending" warning
Currently, can_stop_idle_tick() prints "NOHZ: local_softirq_pending HH"
(where "HH" is the hexadecimal softirq vector number) when one or more
non-RCU softirq handlers are still enabled when checking to stop the
scheduler-tick interrupt.  This message is not as enlightening as one
might hope, so this commit changes it to "NOHZ tick-stop error: Non-RCU
local softirq work is pending, handler #HH".

Reported-by: Andy Lutomirski <luto@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-08-24 18:38:32 -07:00
Frederic Weisbecker
3c8920e2db tick/nohz: Narrow down noise while setting current task's tick dependency
Setting a tick dependency on any task, including the case where a task
sets that dependency on itself, triggers an IPI to all CPUs.  That is
of course suboptimal but it had previously not been an issue because it
was only used by POSIX CPU timers on nohz_full, which apparently never
occurs in latency-sensitive workloads in production.  (Or users of such
systems are suffering in silence on the one hand or venting their ire
on the wrong people on the other.)

But RCU now sets a task tick dependency on the current task in order
to fix stall issues that can occur during RCU callback processing.
Thus, RCU callback processing triggers frequent system-wide IPIs from
nohz_full CPUs.  This is quite counter-productive, after all, avoiding
IPIs is what nohz_full is supposed to be all about.

This commit therefore optimizes tasks' self-setting of a task tick
dependency by using tick_nohz_full_kick() to avoid the system-wide IPI.
Instead, only the execution of the one task is disturbed, which is
acceptable given that this disturbance is well down into the noise
compared to the degree to which the RCU callback processing itself
disturbs execution.

Fixes: 6a949b7af8 (rcu: Force on tick when invoking lots of callbacks)
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@kernel.org
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-06-29 11:58:50 -07:00
Sebastian Andrzej Siewior
49915ac35c lockdep: Annotate irq_work
Mark irq_work items with IRQ_WORK_HARD_IRQ which should be invoked in
hardirq context even on PREEMPT_RT. IRQ_WORK without this flag will be
invoked in softirq context on PREEMPT_RT.

Set ->irq_config to 1 for the IRQ_WORK items which are invoked in softirq
context so lockdep knows that these can safely acquire a spinlock_t.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.643576700@linutronix.de
2020-03-21 16:00:24 +01:00
Thomas Gleixner
e5d4d1756b timekeeping: Split jiffies seqlock
seqlock consists of a sequence counter and a spinlock_t which is used to
serialize the writers. spinlock_t is substituted by a "sleeping" spinlock
on PREEMPT_RT enabled kernels which breaks the usage in the timekeeping
code as the writers are executed in hard interrupt and therefore
non-preemptible context even on PREEMPT_RT.

The spinlock in seqlock cannot be unconditionally replaced by a
raw_spinlock_t as many seqlock users have nesting spinlock sections or
other code which is not suitable to run in truly atomic context on RT.

Instead of providing a raw_seqlock API for a single use case, open code the
seqlock for the jiffies use case and implement it with a raw_spinlock_t and
a sequence counter.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.120587764@linutronix.de
2020-03-21 16:00:23 +01:00
Eric Dumazet
de95a991bb tick/sched: Annotate lockless access to last_jiffies_update
syzbot (KCSAN) reported a data-race in tick_do_update_jiffies64():

BUG: KCSAN: data-race in tick_do_update_jiffies64 / tick_do_update_jiffies64

write to 0xffffffff8603d008 of 8 bytes by interrupt on cpu 1:
 tick_do_update_jiffies64+0x100/0x250 kernel/time/tick-sched.c:73
 tick_sched_do_timer+0xd4/0xe0 kernel/time/tick-sched.c:138
 tick_sched_timer+0x43/0xe0 kernel/time/tick-sched.c:1292
 __run_hrtimer kernel/time/hrtimer.c:1514 [inline]
 __hrtimer_run_queues+0x274/0x5f0 kernel/time/hrtimer.c:1576
 hrtimer_interrupt+0x22a/0x480 kernel/time/hrtimer.c:1638
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1110 [inline]
 smp_apic_timer_interrupt+0xdc/0x280 arch/x86/kernel/apic/apic.c:1135
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 arch_local_irq_restore arch/x86/include/asm/paravirt.h:756 [inline]
 kcsan_setup_watchpoint+0x1d4/0x460 kernel/kcsan/core.c:436
 check_access kernel/kcsan/core.c:466 [inline]
 __tsan_read1 kernel/kcsan/core.c:593 [inline]
 __tsan_read1+0xc2/0x100 kernel/kcsan/core.c:593
 kallsyms_expand_symbol.constprop.0+0x70/0x160 kernel/kallsyms.c:79
 kallsyms_lookup_name+0x7f/0x120 kernel/kallsyms.c:170
 insert_report_filterlist kernel/kcsan/debugfs.c:155 [inline]
 debugfs_write+0x14b/0x2d0 kernel/kcsan/debugfs.c:256
 full_proxy_write+0xbd/0x100 fs/debugfs/file.c:225
 __vfs_write+0x67/0xc0 fs/read_write.c:494
 vfs_write fs/read_write.c:558 [inline]
 vfs_write+0x18a/0x390 fs/read_write.c:542
 ksys_write+0xd5/0x1b0 fs/read_write.c:611
 __do_sys_write fs/read_write.c:623 [inline]
 __se_sys_write fs/read_write.c:620 [inline]
 __x64_sys_write+0x4c/0x60 fs/read_write.c:620
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffffffff8603d008 of 8 bytes by task 0 on cpu 0:
 tick_do_update_jiffies64+0x2b/0x250 kernel/time/tick-sched.c:62
 tick_nohz_update_jiffies kernel/time/tick-sched.c:505 [inline]
 tick_nohz_irq_enter kernel/time/tick-sched.c:1257 [inline]
 tick_irq_enter+0x139/0x1c0 kernel/time/tick-sched.c:1274
 irq_enter+0x4f/0x60 kernel/softirq.c:354
 entering_irq arch/x86/include/asm/apic.h:517 [inline]
 entering_ack_irq arch/x86/include/asm/apic.h:523 [inline]
 smp_apic_timer_interrupt+0x55/0x280 arch/x86/kernel/apic/apic.c:1133
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:60
 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
 rest_init+0xec/0xf6 init/main.c:452
 arch_call_rest_init+0x17/0x37
 start_kernel+0x838/0x85e init/main.c:786
 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Use READ_ONCE() and WRITE_ONCE() to annotate this expected race.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191205045619.204946-1-edumazet@google.com
2020-01-15 10:54:12 +01:00
Linus Torvalds
1ae78780ed Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Dynamic tick (nohz) updates, perhaps most notably changes to force
     the tick on when needed due to lengthy in-kernel execution on CPUs
     on which RCU is waiting.

   - Linux-kernel memory consistency model updates.

   - Replace rcu_swap_protected() with rcu_prepace_pointer().

   - Torture-test updates.

   - Documentation updates.

   - Miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
  net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
  net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
  net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
  bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
  fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
  drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
  drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
  x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
  rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
  rcu: Suppress levelspread uninitialized messages
  rcu: Fix uninitialized variable in nocb_gp_wait()
  rcu: Update descriptions for rcu_future_grace_period tracepoint
  rcu: Update descriptions for rcu_nocb_wake tracepoint
  rcu: Remove obsolete descriptions for rcu_barrier tracepoint
  rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
  workqueue: Convert for_each_wq to use built-in list check
  rcu: Several rcu_segcblist functions can be static
  rcu: Remove unused function hlist_bl_del_init_rcu()
  Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
  ...
2019-11-26 15:42:43 -08:00
Frederic Weisbecker
e44fcb4b7a sched/vtime: Rename vtime_accounting_cpu_enabled() to vtime_accounting_enabled_this_cpu()
Standardize the naming on top of the vtime_accounting_enabled_*() base.
Also make it clear we are checking the vtime state of the
*current* CPU with this function. We'll need to add an API to check that
state on remote CPUs as well, so we must disambiguate the naming.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Link: https://lkml.kernel.org/r/20191016025700.31277-9-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-29 10:01:14 +01:00
Paul E. McKenney
ae9e557b5b time: Export tick start/stop functions for rcutorture
It turns out that rcutorture needs to ensure that the scheduling-clock
interrupt is enabled in CONFIG_NO_HZ_FULL kernels before starting on
CPU-bound in-kernel processing.  This commit therefore exports
tick_nohz_dep_set_task(), tick_nohz_dep_clear_task(), and
tick_nohz_full_setup() to GPL kernel modules.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-05 10:46:03 -07:00
Frederic Weisbecker
01b4c39901 nohz: Add TICK_DEP_BIT_RCU
If a nohz_full CPU is looping in the kernel, the scheduling-clock tick
might nevertheless remain disabled.  In !PREEMPT kernels, this can
prevent RCU's attempts to enlist the aid of that CPU's executions of
cond_resched(), which can in turn result in an arbitrarily delayed grace
period and thus an OOM.  RCU therefore needs a way to enable a holdout
nohz_full CPU's scheduler-clock interrupt.

This commit therefore provides a new TICK_DEP_BIT_RCU value which RCU can
pass to tick_dep_set_cpu() and friends to force on the scheduler-clock
interrupt for a specified CPU or task.  In some cases, rcutorture needs
to turn on the scheduler-clock tick, so this commit also exports the
relevant symbols to GPL-licensed modules.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-05 10:45:16 -07:00
Sebastian Andrzej Siewior
71fed982d6 tick: Mark sched_timer to expire in hard interrupt context
sched_timer must be initialized with the _HARD mode suffix to ensure expiry
in hard interrupt context on RT.

The previous conversion to HARD expiry mode missed on one instance in
tick_nohz_switch_to_nohz(). Fix it up.

Fixes: 902a9f9c50 ("tick: Mark tick related hrtimers to expiry in hard interrupt context")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190823113845.12125-3-bigeasy@linutronix.de
2019-08-28 13:01:26 +02:00
Sebastian Andrzej Siewior
902a9f9c50 tick: Mark tick related hrtimers to expiry in hard interrupt context
The tick related hrtimers, which drive the scheduler tick and hrtimer based
broadcasting are required to expire in hard interrupt context for obvious
reasons.

Mark them so PREEMPT_RT kernels wont move them to soft interrupt expiry.

Make the horribly formatted RCU_NONIDLE bracket maze readable while at it.

No functional change, 

[ tglx: Split out from larger combo patch. Add changelog ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.459144407@linutronix.de
2019-08-01 20:51:21 +02:00
Dietmar Eggemann
5e83eafbfd sched/fair: Remove the rq->cpu_load[] update code
With LB_BIAS disabled, there is no need to update the rq->cpu_load[idx]
any more.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20190527062116.11512-2-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-03 11:49:38 +02:00
Linus Torvalds
8f5e823f91 Power management updates for 5.2-rc1
- Fix the handling of Performance and Energy Bias Hint (EPB) on
    Intel processors and expose it to user space via sysfs to avoid
    having to access it through the generic MSR I/F (Rafael Wysocki).
 
  - Improve the handling of global turbo changes made by the platform
    firmware in the intel_pstate driver (Rafael Wysocki).
 
  - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
    in cpufreq (Borislav Petkov).
 
  - Fix the frequency calculation loop in the armada-37xx cpufreq
    driver (Gregory CLEMENT).
 
  - Fix possible object reference leaks in multuple cpufreq drivers
    (Wen Yang).
 
  - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
 
  - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
    Kumar).
 
  - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
    (Vabhav Sharma, Yuantian Tang).
 
  - Fix kobject memory leak in the cpufreq core (Viresh Kumar).
 
  - Simplify the IOwait boosting in the schedutil cpufreq governor
    and rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
 
  - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
 
  - Improve the cpufreq documentation, add SPDX license tags to
    some PM documentation files and unify copyright notices in
    them (Rafael Wysocki).
 
  - Add support for "CPU" domains to the generic power domains (genpd)
    framework and provide low-level PSCI firmware support for that
    feature (Ulf Hansson).
 
  - Rearrange the PSCI firmware support code and add support for
    SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
 
  - Improve genpd support for devices in multiple power domains (Ulf
    Hansson).
 
  - Unify target residency for the AFTR and coupled AFTR states in the
    exynos cpuidle driver (Marek Szyprowski).
 
  - Introduce new helper routine in the operating performance points
    (OPP) framework (Andrew-sh.Cheng).
 
  - Add support for passing on-die termination (ODT) and auto power
    down parameters from the kernel to Trusted Firmware-A (TF-A) to
    the rk3399_dmc devfreq driver (Enric Balletbo i Serra).
 
  - Add tracing to devfreq (Lukasz Luba).
 
  - Make the exynos-bus devfreq driver suspend all devices on system
    shutdown (Marek Szyprowski).
 
  - Fix a few minor issues in the devfreq subsystem and clean it up
    somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
    Saravana Kannan, Yangtao Li).
 
  - Improve system wakeup diagnostics (Stephen Boyd).
 
  - Rework filesystem sync messages emitted during system suspend and
    hibernation (Harry Pan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzQEwUSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxxXwP/jrxikIXdCOV3CJVioV0NetyebwlOqYp
 UsIA7lQBfZ/DY6dHw/oKuAT9LP01vcFg6XGe83Alkta9qczR5KZ/MYHFNSZXjXjL
 kEvIMBCS/oykaBuW+Xn9am8Ke3Yq/rBSTKWVom3vzSQY0qvZ9GBwPDrzw+k63Zhz
 P3afB4ThyY0e9ftgw4HvSSNm13Kn0ItUIQOdaLatXMMcPqP5aAdnUma5Ibinbtpp
 rpTHuHKYx7MSjaCg6wl3kKTJeWbQP4wYO2ISZqH9zEwQgdvSHeFAvfPKTegUkmw9
 uUsQnPD1JvdglOKovr2muehD1Ur+zsjKDf2OKERkWsWXHPyWzA/AqaVv1mkkU++b
 KaWaJ9pE86kGlJ3EXwRbGfV0dM5rrl+dUUQW6nPI1XJnIOFlK61RzwAbqI26F0Mz
 AlKxY4jyPLcM3SpQz9iILqyzHQqB67rm29XvId/9scoGGgoqEI4S+v6LYZqI3Vx6
 aeSRu+Yof7p5w4Kg5fODX+HzrtMnMrPmLUTXhbExfsYZMi7hXURcN6s+tMpH0ckM
 4yiIpnNGCKUSV4vxHBm8XJdAuUnR4Vcz++yFslszgDVVvw5tkvF7SYeHZ6HqcQVm
 af9HdWzx3qajs/oyBwdRBedZYDnP1joC5donBI2ofLeF33NA7TEiPX8Zebw8XLkv
 fNikssA7PGdv
 =nY9p
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
  handling and expose it to user space via sysfs, fix and clean up
  several cpufreq drivers, add support for two new chips to the qoriq
  cpufreq driver, fix, simplify and clean up the cpufreq core and the
  schedutil governor, add support for "CPU" domains to the generic power
  domains (genpd) framework and provide low-level PSCI firmware support
  for that feature, fix the exynos cpuidle driver and fix a couple of
  issues in the devfreq subsystem and clean it up.

  Specifics:

   - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
     processors and expose it to user space via sysfs to avoid having to
     access it through the generic MSR I/F (Rafael Wysocki).

   - Improve the handling of global turbo changes made by the platform
     firmware in the intel_pstate driver (Rafael Wysocki).

   - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
     in cpufreq (Borislav Petkov).

   - Fix the frequency calculation loop in the armada-37xx cpufreq
     driver (Gregory CLEMENT).

   - Fix possible object reference leaks in multuple cpufreq drivers
     (Wen Yang).

   - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).

   - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
     Kumar).

   - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
     (Vabhav Sharma, Yuantian Tang).

   - Fix kobject memory leak in the cpufreq core (Viresh Kumar).

   - Simplify the IOwait boosting in the schedutil cpufreq governor and
     rework the TSC cpufreq notifier on x86 (Rafael Wysocki).

   - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).

   - Improve the cpufreq documentation, add SPDX license tags to some PM
     documentation files and unify copyright notices in them (Rafael
     Wysocki).

   - Add support for "CPU" domains to the generic power domains (genpd)
     framework and provide low-level PSCI firmware support for that
     feature (Ulf Hansson).

   - Rearrange the PSCI firmware support code and add support for
     SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).

   - Improve genpd support for devices in multiple power domains (Ulf
     Hansson).

   - Unify target residency for the AFTR and coupled AFTR states in the
     exynos cpuidle driver (Marek Szyprowski).

   - Introduce new helper routine in the operating performance points
     (OPP) framework (Andrew-sh.Cheng).

   - Add support for passing on-die termination (ODT) and auto power
     down parameters from the kernel to Trusted Firmware-A (TF-A) to the
     rk3399_dmc devfreq driver (Enric Balletbo i Serra).

   - Add tracing to devfreq (Lukasz Luba).

   - Make the exynos-bus devfreq driver suspend all devices on system
     shutdown (Marek Szyprowski).

   - Fix a few minor issues in the devfreq subsystem and clean it up
     somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
     Saravana Kannan, Yangtao Li).

   - Improve system wakeup diagnostics (Stephen Boyd).

   - Rework filesystem sync messages emitted during system suspend and
     hibernation (Harry Pan)"

* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  x86: tsc: Rework time_cpufreq_notifier()
  PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
  PM / Domains: Search for the CPU device outside the genpd lock
  PM / Domains: Drop unused in-parameter to some genpd functions
  PM / Domains: Use the base device for driver_deferred_probe_check_state()
  cpufreq: qoriq: Add ls1028a chip support
  PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
  PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
  PM / Domains: Don't kfree() the virtual device in the error path
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  PM / Domains: remove unnecessary unlikely()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  firmware/psci: add support for SYSTEM_RESET2
  PM / devfreq: add tracing for scheduling work
  trace: events: add devfreq trace event file
  ...
2019-05-06 19:40:31 -07:00
Linus Torvalds
a0e928ed7c Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
 "This cycle had the following changes:

   - Timer tracing improvements (Anna-Maria Gleixner)

   - Continued tasklet reduction work: remove the hrtimer_tasklet
     (Thomas Gleixner)

   - Fix CPU hotplug remove race in the tick-broadcast mask handling
     code (Thomas Gleixner)

   - Force upper bound for setting CLOCK_REALTIME, to fix ABI
     inconsistencies with handling values that are close to the maximum
     supported and the vagueness of when uptime related wraparound might
     occur. Make the consistent maximum the year 2232 across all
     relevant ABIs and APIs. (Thomas Gleixner)

   - various cleanups and smaller fixes"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Fix typos in comments
  tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline()
  timekeeping: Force upper bound for setting CLOCK_REALTIME
  timer/trace: Improve timer tracing
  timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps
  timer: Move trace point to get proper index
  tick/sched: Update tick_sched struct documentation
  tick: Remove outgoing CPU from broadcast masks
  timekeeping: Consistently use unsigned int for seqcount snapshot
  softirq: Remove tasklet_hrtimer
  xfrm: Replace hrtimer tasklet with softirq hrtimer
  mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-06 14:50:46 -07:00
Nicholas Piggin
08ae95f4fd nohz_full: Allow the boot CPU to be nohz_full
Allow the boot CPU/CPU0 to be nohz_full. Have the boot CPU take the
do_timer duty during boot until a housekeeping CPU can take over.

This is supported when CONFIG_PM_SLEEP_SMP is not configured, or when
it is configured and the arch allows suspend on non-zero CPUs.

nohz_full has been trialed at a large supercomputer site and found to
significantly reduce jitter. In order to deploy it in production, they
need CPU0 to be nohz_full because their job control system requires
the application CPUs to start from 0, and the housekeeping CPUs are
placed higher. An equivalent job scheduling that uses CPU0 for
housekeeping could be achieved by modifying their system, but it is
preferable if nohz_full can support their environment without
modification.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-6-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03 19:42:58 +02:00
Ulf Hansson
6f9b83ac87 cpuidle: Export the next timer expiration for CPUs
To be able to predict the sleep duration for a CPU entering idle, it
is essential to know the expiration time of the next timer.  Both the
teo and the menu cpuidle governors already use this information for
CPU idle state selection.

Moving forward, a similar prediction needs to be made for a group of
idle CPUs rather than for a single one and the following changes
implement a new genpd governor for that purpose.

In order to support that feature, add a new function called
tick_nohz_get_next_hrtimer() that will return the next hrtimer
expiration time of a given CPU to be invoked after deciding
whether or not to stop the scheduler tick on that CPU.

Make the cpuidle core call tick_nohz_get_next_hrtimer() right
before invoking the ->enter() callback provided by the cpuidle
driver for the given state and store its return value in the
per-CPU struct cpuidle_device, so as to make it available to code
outside of cpuidle.

Note that at the point when cpuidle calls tick_nohz_get_next_hrtimer(),
the governor's ->select() callback has already returned and indicated
whether or not the tick should be stopped, so in fact the value
returned by tick_nohz_get_next_hrtimer() always is the next hrtimer
expiration time for the given CPU, possibly including the tick (if
it hasn't been stopped).

Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-10 00:32:34 +02:00
Rasmus Villemoes
e1e41b6ce5 timekeeping: Consistently use unsigned int for seqcount snapshot
The timekeeping code uses a random mix of "unsigned long" and "unsigned
int" for the seqcount snapshots (ratio 14:12). Since the seqlock.h API is
entirely based on unsigned int, use that throughout.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190318195557.20773-1-linux@rasmusvillemoes.dk
2019-03-23 11:43:56 +01:00
Thomas Gleixner
f49c174b5f hrtimers/tick/clockevents: Remove sloppy license references
"For licencing details see kernel-base/COPYING" and similar license
references have no value over the SPDX identifier. Remove them.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: David Riley <davidriley@chromium.org>
Cc: Colin Cross <ccross@android.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lkml.kernel.org/r/20181031182252.963632760@linutronix.de
2018-11-23 11:51:21 +01:00
Thomas Gleixner
35728b8209 time: Add SPDX license identifiers
Update the time(r) core files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of the
full boiler plate text.

This work is based on a script and data from Philippe Ombredanne, Kate
Stewart and myself. The data has been created with two independent license
scanners and manual inspection.

The following files do not contain any direct license information and have
been omitted from the big initial SPDX changes:

  timeconst.bc: The .bc files were not touched
  time.c, timer.c, timekeeping.c: Licence was deduced from EXPORT_SYMBOL_GPL

As those files do not contain direct license references they fall under the
project license, i.e. GPL V2 only.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: David Riley <davidriley@chromium.org>
Cc: Colin Cross <ccross@android.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20181031182252.879109557@linutronix.de
2018-11-23 11:51:20 +01:00